summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net: fill in MODULE_DESCRIPTION()s for dsa_loop_bdinfoBreno Leitao2024-02-091-0/+1
| | | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the DSA loopback fixed PHY module. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20240208164244.3818498-10-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: fill in MODULE_DESCRIPTION()s for ipvtapBreno Leitao2024-02-091-0/+1
| | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the IP-VLAN based tap driver. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240208164244.3818498-9-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* lan966x: Fix crash when adding interface under a lagHoratiu Vultur2024-02-091-2/+7
| | | | | | | | | | | | | | | | | | | | | | There is a crash when adding one of the lan966x interfaces under a lag interface. The issue can be reproduced like this: ip link add name bond0 type bond miimon 100 mode balance-xor ip link set dev eth0 master bond0 The reason is because when adding a interface under the lag it would go through all the ports and try to figure out which other ports are under that lag interface. And the issue is that lan966x can have ports that are NULL pointer as they are not probed. So then iterating over these ports it would just crash as they are NULL pointers. The fix consists in actually checking for NULL pointers before accessing something from the ports. Like we do in other places. Fixes: cabc9d49333d ("net: lan966x: Add lag support for lan966x") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206123054.3052966-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPYMagnus Karlsson2024-02-091-3/+2
| | | | | | | | | | | | | | | | | | | | Do not report the XDP capability NETDEV_XDP_ACT_XSK_ZEROCOPY as the bonding driver does not support XDP and AF_XDP in zero-copy mode even if the real NIC drivers do. Note that the driver used to report everything as supported before a device was bonded. Instead of just masking out the zero-copy support from this, have the driver report that no XDP feature is supported until a real device is bonded. This seems to be more truthful as it is the real drivers that decide what XDP features are supported. Fixes: cb9e6e584d58 ("bonding: add xdp_features support") Reported-by: Prashant Batra <prbatra.mail@gmail.com> Link: https://lore.kernel.org/all/CAJ8uoz2ieZCopgqTvQ9ZY6xQgTbujmC6XkMTamhp68O-h_-rLg@mail.gmail.com/T/ Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20240207084737.20890-1-magnus.karlsson@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net/mlx5: DPLL, Fix possible use after free after delayed work timer triggersJiri Pirko2024-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I managed to hit following use after free warning recently: [ 2169.711665] ================================================================== [ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0 [ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0 [ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2 [ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2169.722457] Call Trace: [ 2169.722756] <IRQ> [ 2169.723024] dump_stack_lvl+0x58/0xb0 [ 2169.723417] print_report+0xc5/0x630 [ 2169.723807] ? __virt_addr_valid+0x126/0x2b0 [ 2169.724268] kasan_report+0xbe/0xf0 [ 2169.724667] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725116] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725570] __run_timers.part.0+0x179/0x4c0 [ 2169.726003] ? call_timer_fn+0x320/0x320 [ 2169.726404] ? lock_downgrade+0x3a0/0x3a0 [ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20 [ 2169.727257] ? ktime_get+0x92/0x150 [ 2169.727630] ? lapic_next_deadline+0x35/0x60 [ 2169.728069] run_timer_softirq+0x40/0x80 [ 2169.728475] __do_softirq+0x1a1/0x509 [ 2169.728866] irq_exit_rcu+0x95/0xc0 [ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80 [ 2169.729718] </IRQ> [ 2169.729993] <TASK> [ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 2169.730755] RIP: 0010:default_idle+0x13/0x20 [ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00 [ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242 [ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62 [ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55 [ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14 [ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0 [ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200 [ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0 [ 2169.736954] ? do_idle+0x285/0x290 [ 2169.737323] default_idle_call+0x63/0x90 [ 2169.737730] do_idle+0x285/0x290 [ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30 [ 2169.738511] ? mark_held_locks+0x1a/0x80 [ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200 [ 2169.739417] cpu_startup_entry+0x30/0x40 [ 2169.739825] start_secondary+0x19a/0x1c0 [ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0 [ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b [ 2169.741179] </TASK> [ 2169.741686] Allocated by task 1098: [ 2169.742058] kasan_save_stack+0x1c/0x40 [ 2169.742456] kasan_save_track+0x10/0x30 [ 2169.742852] __kasan_kmalloc+0x83/0x90 [ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll] [ 2169.743730] auxiliary_bus_probe+0x62/0xb0 [ 2169.744148] really_probe+0x127/0x590 [ 2169.744534] __driver_probe_device+0xd2/0x200 [ 2169.744973] device_driver_attach+0x6b/0xf0 [ 2169.745402] bind_store+0x90/0xe0 [ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.746210] vfs_write+0x41f/0x790 [ 2169.746579] ksys_write+0xc7/0x160 [ 2169.746947] do_syscall_64+0x6f/0x140 [ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.748049] Freed by task 1220: [ 2169.748393] kasan_save_stack+0x1c/0x40 [ 2169.748789] kasan_save_track+0x10/0x30 [ 2169.749188] kasan_save_free_info+0x3b/0x50 [ 2169.749621] poison_slab_object+0x106/0x180 [ 2169.750044] __kasan_slab_free+0x14/0x50 [ 2169.750451] kfree+0x118/0x330 [ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll] [ 2169.751271] auxiliary_bus_remove+0x2e/0x40 [ 2169.751694] device_release_driver_internal+0x24b/0x2e0 [ 2169.752191] unbind_store+0xa6/0xb0 [ 2169.752563] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.753004] vfs_write+0x41f/0x790 [ 2169.753381] ksys_write+0xc7/0x160 [ 2169.753750] do_syscall_64+0x6f/0x140 [ 2169.754132] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.754847] Last potentially related work creation: [ 2169.755315] kasan_save_stack+0x1c/0x40 [ 2169.755709] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.756165] __queue_work+0x382/0x8f0 [ 2169.756552] call_timer_fn+0x126/0x320 [ 2169.756941] __run_timers.part.0+0x2ea/0x4c0 [ 2169.757376] run_timer_softirq+0x40/0x80 [ 2169.757782] __do_softirq+0x1a1/0x509 [ 2169.758387] Second to last potentially related work creation: [ 2169.758924] kasan_save_stack+0x1c/0x40 [ 2169.759322] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.759773] __queue_work+0x382/0x8f0 [ 2169.760156] call_timer_fn+0x126/0x320 [ 2169.760550] __run_timers.part.0+0x2ea/0x4c0 [ 2169.760978] run_timer_softirq+0x40/0x80 [ 2169.761381] __do_softirq+0x1a1/0x509 [ 2169.761998] The buggy address belongs to the object at ffff88812b326a00 which belongs to the cache kmalloc-256 of size 256 [ 2169.763061] The buggy address is located 112 bytes inside of freed 256-byte region [ffff88812b326a00, ffff88812b326b00) [ 2169.764346] The buggy address belongs to the physical page: [ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324 [ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2) [ 2169.767048] page_type: 0xffffffff() [ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001 [ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 2169.768899] page dumped because: kasan: bad access detected [ 2169.769649] Memory state around the buggy address: [ 2169.770116] ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.770805] ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.772173] ^ [ 2169.772787] ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.773477] ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.774160] ================================================================== [ 2169.774845] ================================================================== I didn't manage to reproduce it. Though the issue seems to be obvious. There is a chance that the mlx5_dpll_remove() calls cancel_delayed_work() when the work runs and manages to re-arm itself. In that case, after delay timer triggers next attempt to queue it, it works with freed memory. Fix this by using cancel_delayed_work_sync() instead which makes sure that work is done when it returns. Fixes: 496fd0a26bbf ("mlx5: Implement SyncE support using DPLL infrastructure") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206164328.360313-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* dpll: fix possible deadlock during netlink dump operationJiri Pirko2024-02-093-20/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently, I've been hitting following deadlock warning during dpll pin dump: [52804.637962] ====================================================== [52804.638536] WARNING: possible circular locking dependency detected [52804.639111] 6.8.0-rc2jiri+ #1 Not tainted [52804.639529] ------------------------------------------------------ [52804.640104] python3/2984 is trying to acquire lock: [52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780 [52804.641417] but task is already holding lock: [52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20 [52804.642747] which lock already depends on the new lock. [52804.643551] the existing dependency chain (in reverse order) is: [52804.644259] -> #1 (dpll_lock){+.+.}-{3:3}: [52804.644836] lock_acquire+0x174/0x3e0 [52804.645271] __mutex_lock+0x119/0x1150 [52804.645723] dpll_lock_dumpit+0x13/0x20 [52804.646169] genl_start+0x266/0x320 [52804.646578] __netlink_dump_start+0x321/0x450 [52804.647056] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.647575] genl_rcv_msg+0x1ed/0x3b0 [52804.648001] netlink_rcv_skb+0xdc/0x210 [52804.648440] genl_rcv+0x24/0x40 [52804.648831] netlink_unicast+0x2f1/0x490 [52804.649290] netlink_sendmsg+0x36d/0x660 [52804.649742] __sock_sendmsg+0x73/0xc0 [52804.650165] __sys_sendto+0x184/0x210 [52804.650597] __x64_sys_sendto+0x72/0x80 [52804.651045] do_syscall_64+0x6f/0x140 [52804.651474] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.652001] -> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}: [52804.652650] check_prev_add+0x1ae/0x1280 [52804.653107] __lock_acquire+0x1ed3/0x29a0 [52804.653559] lock_acquire+0x174/0x3e0 [52804.653984] __mutex_lock+0x119/0x1150 [52804.654423] netlink_dump+0xb3/0x780 [52804.654845] __netlink_dump_start+0x389/0x450 [52804.655321] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.655842] genl_rcv_msg+0x1ed/0x3b0 [52804.656272] netlink_rcv_skb+0xdc/0x210 [52804.656721] genl_rcv+0x24/0x40 [52804.657119] netlink_unicast+0x2f1/0x490 [52804.657570] netlink_sendmsg+0x36d/0x660 [52804.658022] __sock_sendmsg+0x73/0xc0 [52804.658450] __sys_sendto+0x184/0x210 [52804.658877] __x64_sys_sendto+0x72/0x80 [52804.659322] do_syscall_64+0x6f/0x140 [52804.659752] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.660281] other info that might help us debug this: [52804.661077] Possible unsafe locking scenario: [52804.661671] CPU0 CPU1 [52804.662129] ---- ---- [52804.662577] lock(dpll_lock); [52804.662924] lock(nlk_cb_mutex-GENERIC); [52804.663538] lock(dpll_lock); [52804.664073] lock(nlk_cb_mutex-GENERIC); [52804.664490] The issue as follows: __netlink_dump_start() calls control->start(cb) with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken. Then nlk->cb_mutex is released and taken again in netlink_dump(), while dpll_lock still being held. That leads to ABBA deadlock when another CPU races with the same operation. Fix this by moving dpll_lock taking into dumpit() callback which ensures correct lock taking order. Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://lore.kernel.org/r/20240207115902.371649-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge tag 'net-6.8-rc4' of ↵Linus Torvalds2024-02-0981-231/+492
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and netfilter. Current release - regressions: - nic: intel: fix old compiler regressions - netfilter: ipset: missing gc cancellations fixed Current release - new code bugs: - netfilter: ctnetlink: fix filtering for zone 0 Previous releases - regressions: - core: fix from address in memcpy_to_iter_csum() - netfilter: nfnetlink_queue: un-break NF_REPEAT - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC. - devlink: avoid potential loop in devlink_rel_nested_in_notify_work() - iwlwifi: - mvm: fix a battery life regression - fix double-free bug - mac80211: fix waiting for beacons logic - nic: nfp: flower: prevent re-adding mac index for bonded port Previous releases - always broken: - rxrpc: fix generation of serial numbers to skip zero - tipc: check the bearer type before calling tipc_udp_nl_bearer_add() - tunnels: fix out of bounds access when building IPv6 PMTU error - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER missed - nic: atlantic: fix DMA mapping for PTP hwts ring Misc: - selftests: more fixes to deal with very slow hosts" * tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 s390/qeth: Fix potential loss of L3-IP@ in case of network issues netfilter: ipset: Missing gc cancellations fixed octeontx2-af: Initialize maps. net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits net: intel: fix old compiler regressions MAINTAINERS: Maintainer change for rds selftests: cmsg_ipv6: repeat the exact packet ...
| * s390/qeth: Fix potential loss of L3-IP@ in case of network issuesAlexandra Winter2024-02-081-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Symptom: In case of a bad cable connection (e.g. dirty optics) a fast sequence of network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth interface. In case of a second DOWN while recovery is still ongoing, it can happen that the IP@ of a Layer3 qeth interface is lost and will not be recovered by the second UP. Problem: When registration of IP addresses with Layer 3 qeth devices fails, (e.g. because of bad address format) the respective IP address is deleted from its hash-table in the driver. If registration fails because of a ENETDOWN condition, the address should stay in the hashtable, so a subsequent recovery can restore it. 3caa4af834df ("qeth: keep ip-address after LAN_OFFLINE failure") fixes this for registration failures during normal operation, but not during recovery. Solution: Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE, i.e. for some reason the card already/still has this address registered. Fixes: 4a71df50047f ("qeth: new qeth device driver") Cc: stable@vger.kernel.org Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
| * octeontx2-af: Initialize maps.Ratheesh Kannoth2024-02-081-16/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | kmalloc_array() without __GFP_ZERO flag does not initialize memory to zero. This causes issues. Use kcalloc() for maps and bitmap_zalloc() for bitmaps. Fixes: dd7842878633 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Brett Creeley <bcreeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206024000.1070260-1-rkannoth@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
| * net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdioSinthu Raja2024-02-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The below commit introduced a WARN when phy state is not in the states: PHY_HALTED, PHY_READY and PHY_UP. commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") When cpsw resumes, there have port in PHY_NOLINK state, so the below warning comes out. Set mac_managed_pm be true to tell mdio that the phy resume/suspend is managed by the mac, to fix the following warning: WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144 CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1 Hardware name: Generic AM33XX (Flattened Device Tree) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x24/0x2c dump_stack_lvl from __warn+0x84/0x15c __warn from warn_slowpath_fmt+0x1a8/0x1c8 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140 dpm_run_callback from device_resume+0xb8/0x2b8 device_resume from dpm_resume+0x144/0x314 dpm_resume from dpm_resume_end+0x14/0x20 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c pm_suspend from state_store+0x74/0xd0 state_store from kernfs_fop_write_iter+0x104/0x1ec kernfs_fop_write_iter from vfs_write+0x1b8/0x358 vfs_write from ksys_write+0x78/0xf8 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe094dfa8 to 0xe094dff0) dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001 dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000 dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66 Cc: <stable@vger.kernel.org> # v6.0+ Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
| * net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdioSinthu Raja2024-02-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The below commit introduced a WARN when phy state is not in the states: PHY_HALTED, PHY_READY and PHY_UP. commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") When cpsw_new resumes, there have port in PHY_NOLINK state, so the below warning comes out. Set mac_managed_pm be true to tell mdio that the phy resume/suspend is managed by the mac, to fix the following warning: WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144 CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1 Hardware name: Generic AM33XX (Flattened Device Tree) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x24/0x2c dump_stack_lvl from __warn+0x84/0x15c __warn from warn_slowpath_fmt+0x1a8/0x1c8 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140 dpm_run_callback from device_resume+0xb8/0x2b8 device_resume from dpm_resume+0x144/0x314 dpm_resume from dpm_resume_end+0x14/0x20 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c pm_suspend from state_store+0x74/0xd0 state_store from kernfs_fop_write_iter+0x104/0x1ec kernfs_fop_write_iter from vfs_write+0x1b8/0x358 vfs_write from ksys_write+0x78/0xf8 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe094dfa8 to 0xe094dff0) dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001 dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000 dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66 Cc: <stable@vger.kernel.org> # v6.0+ Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
| * Merge tag 'wireless-2024-02-06' of ↵Jakub Kicinski2024-02-0753-16/+64
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.8-rc4 This time we have unusually large wireless pull request. Several functionality fixes to both stack and iwlwifi. Lots of fixes to warnings, especially to MODULE_DESCRIPTION(). * tag 'wireless-2024-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits) wifi: mt76: mt7996: fix fortify warning wifi: brcmfmac: Adjust n_channels usage for __counted_by wifi: iwlwifi: do not announce EPCS support wifi: iwlwifi: exit eSR only after the FW does wifi: iwlwifi: mvm: fix a battery life regression wifi: mac80211: accept broadcast probe responses on 6 GHz wifi: mac80211: adding missing drv_mgd_complete_tx() call wifi: mac80211: fix waiting for beacons logic wifi: mac80211: fix unsolicited broadcast probe config wifi: mac80211: initialize SMPS mode correctly wifi: mac80211: fix driver debugfs for vif type change wifi: mac80211: set station RX-NSS on reconfig wifi: mac80211: fix RCU use in TDLS fast-xmit wifi: mac80211: improve CSA/ECSA connection refusal wifi: cfg80211: detect stuck ECSA element in probe resp wifi: iwlwifi: remove extra kernel-doc wifi: fill in MODULE_DESCRIPTION()s for mt76 drivers wifi: fill in MODULE_DESCRIPTION()s for wilc1000 wifi: fill in MODULE_DESCRIPTION()s for wl18xx wifi: fill in MODULE_DESCRIPTION()s for p54spi ... ==================== Link: https://lore.kernel.org/r/20240206095722.CD9D2C433F1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| | * wifi: mt76: mt7996: fix fortify warningFelix Fietkau2024-02-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Copy cck and ofdm separately in order to avoid __read_overflow2_field warning. Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240203132446.54790-1-nbd@nbd.name
| | * wifi: brcmfmac: Adjust n_channels usage for __counted_byKees Cook2024-02-021-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by"), the compiler may enforce dynamic array indexing of req->channels to stay below n_channels. As a result, n_channels needs to be increased _before_ accessing the newly added array index. Increment it first, then use "i" for the prior index. Solves this warning in the coming GCC that has __counted_by support: ../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c: In function 'brcmf_internal_escan_add_info': ../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:3783:46: warning: operation on 'req-> n_channels' may be undefined [-Wsequence-point] 3783 | req->channels[req->n_channels++] = chan; | ~~~~~~~~~~~~~~~^~ Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Ian Lin <ian.lin@infineon.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Hector Martin <marcan@marcan.st> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126223150.work.548-kees@kernel.org
| | * wifi: iwlwifi: do not announce EPCS supportBenjamin Berg2024-02-021-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mac80211 does not have proper support for EPCS currently as that would require changing the ECDA parameters if EPCS (Emergency Preparedness Communications Service) is in use. As such, do not announce support for it in the capabilities. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240201155157.59d71656addc.Idde91b3018239c49fc6ed231b411d05354fb9fb1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * wifi: iwlwifi: exit eSR only after the FW doesMiri Korenblit2024-02-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the driver exits eSR by calling iwl_mvm_esr_mode_inactive() before updating the FW (by deactivating one of the links), and therefore before sending the EML frame notifying that we are no longer in eSR. This is wrong for several reasons: 1. The driver sends SMPS activation frames when we are still in eSR and SMPS should be disabled when in eSR 2. The driver restores RLC configuration as it was before eSR entering, and RLC command shouldn't be sent in eSR Fix this by calling iwl_mvm_esr_mode_inactive() after FW update Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20240201155157.d8d9dc277d4e.Ib5aee0fd05e35b1da7f18753eb3c8fa0a3f872f3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * wifi: iwlwifi: mvm: fix a battery life regressionEmmanuel Grumbach2024-02-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the DBG_CONFIG_TOKEN to not enable debug components that would prevent the device to save power. Fixes: fc2fe0a5e856 ("wifi: iwlwifi: fw: disable firmware debug asserts") Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Eilon Rinat <eilon.rinat@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240128084842.90d2600edc27.Id657ea2f0ddb131f5f9d0ac39aeb8c88754fe54b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * wifi: iwlwifi: remove extra kernel-docJohannes Berg2024-02-011-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This no longer exists, remove the kernel-doc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240128102209.d2192d79bc09.Id9551728d618248dd471382a5283503a8976237a@changeid
| | * wifi: fill in MODULE_DESCRIPTION()s for mt76 driversBreno Leitao2024-01-3129-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the MediaTek mt76 drivers. Here is a sorted list of descriptions. It might make the reviewing process easier. MODULE_DESCRIPTION("MediaTek MT7603E and MT76x8 wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E and MT7663E wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers"); MODULE_DESCRIPTION("MediaTek MT7663S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7663U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x02 helpers"); MODULE_DESCRIPTION("MediaTek MT76x02 MCU helpers"); MODULE_DESCRIPTION("MediaTek MT76x0E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x0U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2 EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x2E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x connac layer helpers"); MODULE_DESCRIPTION("MediaTek MT76x EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x helpers"); MODULE_DESCRIPTION("MediaTek MT76x SDIO helpers"); MODULE_DESCRIPTION("MediaTek MT76x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7915E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7921 core driver"); MODULE_DESCRIPTION("MediaTek MT7921E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925 core driver"); MODULE_DESCRIPTION("MediaTek MT7925E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT792x core driver"); MODULE_DESCRIPTION("MediaTek MT792x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7996 MMIO helpers"); Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-10-leitao@debian.org
| | * wifi: fill in MODULE_DESCRIPTION()s for wilc1000Breno Leitao2024-01-313-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atmel WILC1000 SPI driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-9-leitao@debian.org
| | * wifi: fill in MODULE_DESCRIPTION()s for wl18xxBreno Leitao2024-01-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WiLink 8 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-8-leitao@debian.org
| | * wifi: fill in MODULE_DESCRIPTION()s for p54spiBreno Leitao2024-01-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Prism54 SPI wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-7-leitao@debian.org
| | * wifi: fill in MODULE_DESCRIPTION()s for wcn36xxBreno Leitao2024-01-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Qualcomm Atheros WCN3660/3680 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-6-leitao@debian.org
| | * wifi: fill in MODULE_DESCRIPTION()s for ar5523Breno Leitao2024-01-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atheros AR5523 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-5-leitao@debian.org
| | * wifi: fill in MODULE_DESCRIPTION()s for Broadcom WLANBreno Leitao2024-01-313-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Broadcom FullMac WLAN drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-4-leitao@debian.org
| | * wifi: fill in MODULE_DESCRIPTION()s for wl1251 and wl12xxBreno Leitao2024-01-313-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI wireless drivers wl12xx and wl1251. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-3-leitao@debian.org
| | * wifi: fill in MODULE_DESCRIPTION()s for wlcoreBreno Leitao2024-01-313-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WLAN wlcore drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-2-leitao@debian.org
| | * wifi: iwlwifi: mvm: skip adding debugfs symlink for reconfigBenjamin Berg2024-01-262-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function to add an interface may be called without a previous removal if the HW is being reconfigured. As such, only add the symlink if the hardware is not being reconfigured due to a HW_RESTART. Fixes: c36235acb34f ("wifi: iwlwifi: mvm: rework debugfs handling") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240123200528.314395eacda4.I5823e962c3c3674b942383733debd10b3fe903e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * wifi: iwlwifi: fix double-free bugJohannes Berg2024-01-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The storage for the TLV PC register data wasn't done like all the other storage in the drv->fw area, which is cleared at the end of deallocation. Therefore, the freeing must also be done differently, explicitly NULL'ing it out after the free, since otherwise there's a nasty double-free bug here if a file fails to load after this has been parsed, and we get another free later (e.g. because no other file exists.) Fix that by adding the missing NULL assignment. Cc: stable@vger.kernel.org Fixes: 5e31b3df86ec ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred") Reported-by: Guy Kaplan <guy.kaplan@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240123200528.675f3c24ec0d.I6ab4015cd78d82dd95471f840629972ef0331de3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | net: intel: fix old compiler regressionsJesse Brandeburg2024-02-073-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel build regressions/improvements email contained a couple of issues with old compilers (in fact all the reports were on different architectures, but all gcc 5.5) and the FIELD_PREP() and FIELD_GET() conversions. They're all because an integer #define that should have been declared as unsigned, was shifted to the point that it could set the sign bit. The fix just involves making sure the defines use the "U" identifier on the constants to make sure they're unsigned. Should make the checkers happier. Confirmed with objdump before/after that there is no change to the binaries. Issues were reported as follows: ./drivers/net/ethernet/intel/ice/ice_base.c:238:7: note: in expansion of macro 'FIELD_GET' (FIELD_GET(GLINT_CTL_ITR_GRAN_25_M, regval) == ICE_ITR_GRAN_US)) ^ ./include/linux/compiler_types.h:435:38: error: call to '__compiletime_assert_1093' declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/ice/ice_nvm.c:709:16: note: in expansion of macro ‘FIELD_GET’ orom->major = FIELD_GET(ICE_OROM_VER_MASK, combo_ver); ^ ./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_796’ declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/ice/ice_common.c:945:18: note: in expansion of macro ‘FIELD_GET’ u8 max_agg_bw = FIELD_GET(GL_PWR_MODE_CTL_CAR_MAX_BW_M, ^ ./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_420’ declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/i40e/i40e_dcb.c:458:8: note: in expansion of macro ‘FIELD_GET’ oui = FIELD_GET(I40E_LLDP_TLV_OUI_MASK, ouisubtype); ^ Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/lkml/d03e90ca-8485-4d1b-5ec1-c3398e0e8da@linux-m68k.org/ #i40e #ice Fixes: 62589808d73b ("i40e: field get conversion") Fixes: 5a259f8e0baf ("ice: field get conversion") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20240206022906.2194214-1-jesse.brandeburg@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | net: stmmac: protect updates of 64-bit statistics countersPetr Tesarik2024-02-077-157/+221
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As explained by a comment in <linux/u64_stats_sync.h>, write side of struct u64_stats_sync must ensure mutual exclusion, or one seqcount update could be lost on 32-bit platforms, thus blocking readers forever. Such lockups have been observed in real world after stmmac_xmit() on one CPU raced with stmmac_napi_poll_tx() on another CPU. To fix the issue without introducing a new lock, split the statics into three parts: 1. fields updated only under the tx queue lock, 2. fields updated only during NAPI poll, 3. fields updated only from interrupt context, Updates to fields in the first two groups are already serialized through other locks. It is sufficient to split the existing struct u64_stats_sync so that each group has its own. Note that tx_set_ic_bit is updated from both contexts. Split this counter so that each context gets its own, and calculate their sum to get the total value in stmmac_get_ethtool_stats(). For the third group, multiple interrupts may be processed by different CPUs at the same time, but interrupts on the same CPU will not nest. Move fields from this group to a newly created per-cpu struct stmmac_pcpu_stats. Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary") Link: https://lore.kernel.org/netdev/Za173PhviYg-1qIn@torres.zugschlus.de/t/ Cc: stable@vger.kernel.org Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ppp_async: limit MRU to 64KEric Dumazet2024-02-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzbot triggered a warning [1] in __alloc_pages(): WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp) Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K") Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU) [1]: WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: events_unbound flush_to_ldisc pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537 sp : ffff800093967580 x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000 x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0 x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8 x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120 x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005 x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000 x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001 x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0 Call trace: __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] __kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926 __do_kmalloc_node mm/slub.c:3969 [inline] __kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001 kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590 __alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651 __netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715 netdev_alloc_skb include/linux/skbuff.h:3235 [inline] dev_alloc_skb include/linux/skbuff.h:3248 [inline] ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline] ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341 tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390 tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37 receive_buf drivers/tty/tty_buffer.c:444 [inline] flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494 process_one_work+0x694/0x1204 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:2787 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+c5da1f087c9e4ec6c933@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240205171004.1059724-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | net: stmmac: xgmac: fix a typo of register name in DPP safety handlingFurong Xu2024-02-062-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DDPP is copied from Synopsys Data book: DDPP: Disable Data path Parity Protection. When it is 0x0, Data path Parity Protection is enabled. When it is 0x1, Data path Parity Protection is disabled. The macro name should be XGMAC_DPP_DISABLE. Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels") Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20240203053133.1129236-1-0x1207@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
| * | nfp: enable NETDEV_XDP_ACT_REDIRECT feature flagJames Hershaw2024-02-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable previously excluded xdp feature flag for NFD3 devices. This feature flag is required in order to bind nfp interfaces to an xdp socket and the nfp driver does in fact support the feature. Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Cc: stable@vger.kernel.org # 6.3+ Signed-off-by: James Hershaw <james.hershaw@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | nfp: flower: prevent re-adding mac index for bonded portDaniel de Villiers2024-02-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When physical ports are reset (either through link failure or manually toggled down and up again) that are slaved to a Linux bond with a tunnel endpoint IP address on the bond device, not all tunnel packets arriving on the bond port are decapped as expected. The bond dev assigns the same MAC address to itself and each of its slaves. When toggling a slave device, the same MAC address is therefore offloaded to the NFP multiple times with different indexes. The issue only occurs when re-adding the shared mac. The nfp_tunnel_add_shared_mac() function has a conditional check early on that checks if a mac entry already exists and if that mac entry is global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the case of a bonded device (For example br-ex), the mac index is obtained, and no new index is assigned. We therefore modify the conditional in nfp_tunnel_add_shared_mac() to check if the port belongs to the LAG along with the existing checks to prevent a new global mac index from being re-assigned to the slave port. Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs") CC: stable@vger.kernel.org # 5.1+ Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | nfp: use correct macro for LengthSelect in BAR configDaniel Basilio2024-02-051-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 1st and 2nd expansion BAR configuration registers are configured, when the driver starts up, in variables 'barcfg_msix_general' and 'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in from bit 0, which is incorrect. The 'LengthSelect' field should start from bit 27. This has largely gone un-noticed because NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0. Fixes: 4cb584e0ee7d ("nfp: add CPP access core") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missedShradha Gupta2024-02-041-20/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER handler cannot perform VF register successfully as the register call is received before netvsc_probe is finished. This is because we register register_netdevice_notifier() very early( even before vmbus_driver_register()). To fix this, we try to register each such matching VF( if it is visible as a netdevice) at the end of netvsc_probe. Cc: stable@vger.kernel.org Fixes: 85520856466e ("hv_netvsc: Fix race of register_netdevice_notifier and VF register") Suggested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | octeontx2-pf: Fix a memleak otx2_sq_initZhipeng Lu2024-02-031-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When qmem_alloc and pfvf->hw_ops->sq_aq_init fails, sq->sg should be freed to prevent memleak. Fixes: c9c12d339d93 ("octeontx2-pf: Add support for PTP clock") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | atm: idt77252: fix a memleak in open_card_ubr0Zhipeng Lu2024-02-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When alloc_scq fails, card->vcs[0] (i.e. vc) should be freed. Otherwise, in the following call chain: idt77252_init_one |-> idt77252_dev_open |-> open_card_ubr0 |-> alloc_scq [failed] |-> deinit_card |-> vfree(card->vcs); card->vcs is freed and card->vcs[0] is leaked. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tsnep: Fix mapping for zero copy XDP_TX actionGerhard Engleder2024-02-031-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is done by xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame depends on the memory type of the xdp_buff. For page pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_ORDER0. tsnep_xdp_xmit_back() is not prepared for that and uses always the page pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings and the transmission of undefined data. Improve tsnep_xdp_xmit_back() to use the generic buffer type TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX. Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: atlantic: Fix DMA mapping for PTP hwts ringIvan Vecera2024-02-033-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function aq_ring_hwts_rx_alloc() maps extra AQ_CFG_RXDS_DEF bytes for PTP HWTS ring but then generic aq_ring_free() does not take this into account. Create and use a specific function to free HWTS ring to fix this issue. Trace: [ 215.351607] ------------[ cut here ]------------ [ 215.351612] DMA-API: atlantic 0000:4b:00.0: device driver frees DMA memory with different size [device address=0x00000000fbdd0000] [map size=34816 bytes] [unmap size=32768 bytes] [ 215.351635] WARNING: CPU: 33 PID: 10759 at kernel/dma/debug.c:988 check_unmap+0xa6f/0x2360 ... [ 215.581176] Call Trace: [ 215.583632] <TASK> [ 215.585745] ? show_trace_log_lvl+0x1c4/0x2df [ 215.590114] ? show_trace_log_lvl+0x1c4/0x2df [ 215.594497] ? debug_dma_free_coherent+0x196/0x210 [ 215.599305] ? check_unmap+0xa6f/0x2360 [ 215.603147] ? __warn+0xca/0x1d0 [ 215.606391] ? check_unmap+0xa6f/0x2360 [ 215.610237] ? report_bug+0x1ef/0x370 [ 215.613921] ? handle_bug+0x3c/0x70 [ 215.617423] ? exc_invalid_op+0x14/0x50 [ 215.621269] ? asm_exc_invalid_op+0x16/0x20 [ 215.625480] ? check_unmap+0xa6f/0x2360 [ 215.629331] ? mark_lock.part.0+0xca/0xa40 [ 215.633445] debug_dma_free_coherent+0x196/0x210 [ 215.638079] ? __pfx_debug_dma_free_coherent+0x10/0x10 [ 215.643242] ? slab_free_freelist_hook+0x11d/0x1d0 [ 215.648060] dma_free_attrs+0x6d/0x130 [ 215.651834] aq_ring_free+0x193/0x290 [atlantic] [ 215.656487] aq_ptp_ring_free+0x67/0x110 [atlantic] ... [ 216.127540] ---[ end trace 6467e5964dd2640b ]--- [ 216.132160] DMA-API: Mapped at: [ 216.132162] debug_dma_alloc_coherent+0x66/0x2f0 [ 216.132165] dma_alloc_attrs+0xf5/0x1b0 [ 216.132168] aq_ring_hwts_rx_alloc+0x150/0x1f0 [atlantic] [ 216.132193] aq_ptp_ring_alloc+0x1bb/0x540 [atlantic] [ 216.132213] aq_nic_init+0x4a1/0x760 [atlantic] Fixes: 94ad94558b0f ("net: aquantia: add PTP rings infrastructure") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240201094752.883026-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | netdevsim: avoid potential loop in nsim_dev_trap_report_work()Eric Dumazet2024-02-021-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many syzbot reports include the following trace [1] If nsim_dev_trap_report_work() can not grab the mutex, it should rearm itself at least one jiffie later. [1] Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 32383 Comm: kworker/0:2 Not tainted 6.8.0-rc2-syzkaller-00031-g861c0981648f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: events nsim_dev_trap_report_work RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:89 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:104 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:129 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:161 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0x101/0x190 mm/kasan/generic.c:189 Code: 07 49 39 d1 75 0a 45 3a 11 b8 01 00 00 00 7c 0b 44 89 c2 e8 21 ed ff ff 83 f0 01 5b 5d 41 5c c3 48 85 d2 74 4f 48 01 ea eb 09 <48> 83 c0 01 48 39 d0 74 41 80 38 00 74 f2 eb b6 41 bc 08 00 00 00 RSP: 0018:ffffc90012dcf998 EFLAGS: 00000046 RAX: fffffbfff258af1e RBX: fffffbfff258af1f RCX: ffffffff8168eda3 RDX: fffffbfff258af1f RSI: 0000000000000004 RDI: ffffffff92c578f0 RBP: fffffbfff258af1e R08: 0000000000000000 R09: fffffbfff258af1e R10: ffffffff92c578f3 R11: ffffffff8acbcbc0 R12: 0000000000000002 R13: ffff88806db38400 R14: 1ffff920025b9f42 R15: ffffffff92c578e8 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00994e078 CR3: 000000002c250000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> instrument_atomic_read include/linux/instrumented.h:68 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline] queued_spin_is_locked include/asm-generic/qspinlock.h:57 [inline] debug_spin_unlock kernel/locking/spinlock_debug.c:101 [inline] do_raw_spin_unlock+0x53/0x230 kernel/locking/spinlock_debug.c:141 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:150 [inline] _raw_spin_unlock_irqrestore+0x22/0x70 kernel/locking/spinlock.c:194 debug_object_activate+0x349/0x540 lib/debugobjects.c:726 debug_work_activate kernel/workqueue.c:578 [inline] insert_work+0x30/0x230 kernel/workqueue.c:1650 __queue_work+0x62e/0x11d0 kernel/workqueue.c:1802 __queue_delayed_work+0x1bf/0x270 kernel/workqueue.c:1953 queue_delayed_work_on+0x106/0x130 kernel/workqueue.c:1989 queue_delayed_work include/linux/workqueue.h:563 [inline] schedule_delayed_work include/linux/workqueue.h:677 [inline] nsim_dev_trap_report_work+0x9c0/0xc80 drivers/net/netdevsim/dev.c:842 process_one_work+0x886/0x15d0 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x8b9/0x1290 kernel/workqueue.c:2787 kthread+0x2c6/0x3a0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 </TASK> Fixes: 012ec02ae441 ("netdevsim: convert driver to use unlocked devlink API during init/fini") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240201175324.3752746-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | net: stmmac: xgmac: fix handling of DPP safety error for DMA channelsFurong Xu2024-02-023-1/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core") checks and reports safety errors, but leaves the Data Path Parity Errors for each channel in DMA unhandled at all, lead to a storm of interrupt. Fix it by checking and clearing the DMA_DPP_Interrupt_Status register. Fixes: 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core") Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge tag 'pinctrl-v6.8-2' of ↵Linus Torvalds2024-02-091-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fix from Linus Walleij: "A single fix for the AMD driver which affects developer laptops, the pinctrl/GPIO driver won't probe on some systems" * tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: amd: Add IRQF_ONESHOT to the interrupt request
| * | | pinctrl: amd: Add IRQF_ONESHOT to the interrupt requestMario Limonciello2024-01-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some systems the interrupt is shared between GPIO controller and ACPI SCI. When the interrupt is shared with the ACPI SCI the flags need to be identical. This should fix the GPIO controller failing to work after commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI"). ``` [ 0.417335] genirq: Flags mismatch irq 9. 00000088 (pinctrl_amd) vs. 00002080 (acpi) [ 0.420073] amd_gpio: probe of AMDI0030:00 failed with error -16 ``` Cc: Rafael J. Wysocki <rafael@kernel.org> Reported-by: Christian Heusel <christian@heusel.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218407 Fixes: 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iRqUXeuKmC_+dAJtDBLWQ3x15n4gRH48y7MEaLoXF+UA@mail.gmail.com/T/#mc5506014141b61e472b24e095889535a04458083 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Tested-by: Christian Heusel <christian@heusel.eu> Link: https://lore.kernel.org/r/20240123180818.3994-1-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | | Merge tag 'v6.8-p3' of ↵Linus Torvalds2024-02-081-2/+8
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix regressions in cbc and algif_hash, as well as an older NULL-pointer dereference in ccp" * tag 'v6.8-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algif_hash - Remove bogus SGL free on zero-length error path crypto: cbc - Ensure statesize is zero crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_locked
| * | | | crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_lockedKim Phillips2024-02-021-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ #311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] </TASK> [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece0c931 ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | | | Merge tag 'char-misc-6.8-rc3' of ↵Linus Torvalds2024-02-043-2/+12
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are three tiny driver fixes for 6.8-rc3. They include: - Android binder long-term bug with epoll finally being fixed - fastrpc driver shutdown bugfix - open-dice lockdep fix All of these have been in linux-next this week with no reported issues" * tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: signal epoll threads of self-work misc: open-dice: Fix spurious lockdep warning misc: fastrpc: Mark all sessions as invalid in cb_remove
| * | | | | binder: signal epoll threads of self-workCarlos Llamas2024-01-311-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In (e)poll mode, threads often depend on I/O events to determine when data is ready for consumption. Within binder, a thread may initiate a command via BINDER_WRITE_READ without a read buffer and then make use of epoll_wait() or similar to consume any responses afterwards. It is then crucial that epoll threads are signaled via wakeup when they queue their own work. Otherwise, they risk waiting indefinitely for an event leaving their work unhandled. What is worse, subsequent commands won't trigger a wakeup either as the thread has pending work. Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Cc: Arve Hjønnevåg <arve@android.com> Cc: Martijn Coenen <maco@android.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Steven Moreland <smoreland@google.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | misc: open-dice: Fix spurious lockdep warningWill Deacon2024-01-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When probing the open-dice driver with PROVE_LOCKING=y, lockdep complains that the mutex in 'drvdata->lock' has a non-static key: | INFO: trying to register non-static key. | The code is fine but needs lockdep annotation, or maybe | you didn't initialize this object before use? | turning off the locking correctness validator. Fix the problem by initialising the mutex memory with mutex_init() instead of __MUTEX_INITIALIZER(). Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Brazdil <dbrazdil@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240126152410.10148-1-will@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>