summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drivers: net: cpsw: fix RMII/RGMII mode when used with fixed-link PHYDavid Rivshin2015-12-181-18/+22
| | | | | | | | | | | | | | | | | | Commit 1f71e8c96fc654724723ce987e0a8b2aeb81746d ("drivers: net: cpsw: Add support for fixed-link PHY") did not parse the "phy-mode" property in the case of a fixed-link PHY, leaving slave_data->phy_if with its default of PHY_INTERFACE_MODE_NA(0). This later gets passed to phy_connect() in cpsw_slave_open(), and eventually to cpsw_phy_sel() where it hits a default case that configures the MAC for MII mode. The user visible symptom is that while kernel log messages seem to indicate that the interface is set up, there is no network communication. Eventually a watchdog error occurs: NETDEV WATCHDOG: eth0 (cpsw): transmit queue 0 timed out Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: David Rivshin <drivshin@allworx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet:ti:cpsw: fix phy identification with multiple slaves on fixed-phyPascal Speck (Iktek)2015-12-181-1/+1
| | | | | | | | | | | When using more than one slave with ti cpsw and fixed phy the pd->phy_id will be always zero, but slave_data->phy_id must be unique. pd->phy_id means a "phy hardware id" whereas slave_data->phy_id means an "unique id", so we should use pd->addr which has the same unique meaning. Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: Pascal Speck <kernel@iktek.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-12-1754-378/+550
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of people reported this... From Arnd Bergmann. 2) Don't init mutex twice in i40e driver, from Jesse Brandeburg. 3) Fix spurious EBUSY in rhashtable, from Herbert Xu. 4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas. 5) Fix race with work structure access in pppoe driver causing corruptions, from Guillaume Nault. 6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb() actually succeeded or not, from Sergei Shtylyov. 7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from Bjørn Mork. 8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc. 9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo Leitner. 10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven. 11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling properly as well, from Jiri Benc. 12) Handle request sockets properly in xfrm layer, from Eric Dumazet. 13) Double stats update in ipv6 geneve transmit path, fix from Pravin B Shelar. 14) sk->sk_policy[] needs RCU protection, and as a result xfrm_policy_destroy() needs to free policies using an RCU grace period, from Eric Dumazet. 15) SCTP needs to clone ipv6 tx options in order to avoid use after free, from Eric Dumazet. 16) Missing kbuild export if ila.h, from Stephen Hemminger. 17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from Tobias Klauser. 18) Validate protocol value range in ->create() methods, from Hannes Frederic Sowa. 19) Fix early socket demux races that result in illegal dst reuse, from Eric Dumazet. 20) Validate socket address length in pptp code, from WANG Cong. 21) skb_reorder_vlan_header() uses incorrect offset and can corrupt packets, from Vlad Yasevich. 22) Fix memory leaks in nl80211 registry code, from Ola Olsson. 23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and qlcnic. From Dan Carpenter. 24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for example, AF_ALG will interpret it as an async call. From Tadeusz Struk. 25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from Eric Dumazet. 26) rhashtable enforces the minimum table size not early enough, breaking how we calculate the per-cpu lock allocations. From Herbert Xu. 27) Fix FCC port lockup in 82xx driver, from Martin Roth. 28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa. 29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and sock_setsockopt() wrt. timestamp handling. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits) net: check both type and procotol for tcp sockets drivers: net: xgene: fix Tx flow control tcp: restore fastopen with no data in SYN packet af_unix: Revert 'lock_interruptible' in stream receive code fou: clean up socket with kfree_rcu 82xx: FCC: Fixing a bug causing to FCC port lock-up gianfar: Don't enable RX Filer if not supported net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration rhashtable: Fix walker list corruption rhashtable: Enforce minimum size on initial hash table inet: tcp: fix inetpeer_set_addr_v4() ipv6: automatically enable stable privacy mode if stable_secret set net: fix uninitialized variable issue bluetooth: Validate socket address length in sco_sock_bind(). net_sched: make qdisc_tree_decrease_qlen() work for non mq ser_gigaset: remove unnecessary kfree() calls from release method ser_gigaset: fix deallocation of platform device structure ser_gigaset: turn nonsense checks into WARN_ON ser_gigaset: fix up NULL checks qlcnic: fix a timeout loop ...
| * drivers: net: xgene: fix Tx flow controlIyappan Subramanian2015-12-172-18/+24
| | | | | | | | | | | | | | | | | | | | | | Currently the Tx flow control is based on reading the hardware state, which is not accurate since it may not reflect the descriptors that are not yet reached the memory. To accurately control the Tx flow, changing it to be software based. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * 82xx: FCC: Fixing a bug causing to FCC port lock-upMartin Roth2015-12-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The patch fixes FCC port lock-up, which occurs as a result of a bug during underrun/collision handling. Within the tx_startup() function in mac-fcc.c, the address of last BD is not calculated correctly. As a result of wrong calculation of the last BD address, the next transmitted BD may be set to an area out of the transmit BD ring. This actually causes to port lock-up and it is not recoverable. Signed-off-by: Martin Roth <martin.roth@motorolasolutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gianfar: Don't enable RX Filer if not supportedHamish Martin2015-12-172-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 15bf176db1fb ("gianfar: Don't enable the Filer w/o the Parser"), 'TSEC' model controllers (for example as seen on MPC8541E) always have 8 bytes stripped from the front of received frames. Only 'eTSEC' gianfar controllers have the RX Filer capability (amongst other enhancements). Previously this was treated as always enabled for both 'TSEC' and 'eTSEC' controllers. In commit 15bf176db1fb ("gianfar: Don't enable the Filer w/o the Parser") a subtle change was made to the setting of 'uses_rxfcb' to effectively always set it (since 'rx_filer_enable' was always true). This had the side-effect of always stripping 8 bytes from the front of received frames on 'TSEC' type controllers. We now only enable the RX Filer capability on controller types that support it, thereby avoiding the issue for 'TSEC' type controllers. Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ser_gigaset: remove unnecessary kfree() calls from release methodTilman Schmidt2015-12-151-5/+0
| | | | | | | | | | | | | | | | | | | | device->platform_data and platform_device->resource are never used and remain NULL through their entire life. Drops the kfree() calls for them from the device release method. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ser_gigaset: fix deallocation of platform device structureTilman Schmidt2015-12-151-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | When shutting down the device, the struct ser_cardstate must not be kfree()d immediately after the call to platform_device_unregister() since the embedded struct platform_device is still in use. Move the kfree() call to the release method instead. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Fixes: 2869b23e4b95 ("drivers/isdn/gigaset: new M101 driver (v2)") Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ser_gigaset: turn nonsense checks into WARN_ONAlan Cox2015-12-151-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These checks do nothing useful to protect the code from races. On the other hand if the old code has been masking a real bug we would like to know about it. The check for tiocmset is kept because it is valid for a tty driver to have a NULL tiocmset method. That in itself is probably a mistake given modern coding practices - but needs fixing in the tty layer. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ser_gigaset: fix up NULL checksTilman Schmidt2015-12-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | Commit f34d7a5b7010 ("tty: The big operations rework") changed tty->driver to tty->ops but left NULL checks for tty->driver untouched. Fix. Signed-off-by: Tilman Schmidt <tilman@imap.cc> [pebolle: removed Fixes tag] Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qlcnic: fix a timeout loopDan Carpenter2015-12-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | The problem here is that at the end of the loop we test for if idc->vnic_wait_limit is zero, but since idc->vnic_wait_limit-- is a post-op, it actually ends up set to (u8)-1. I have fixed this by moving the decrement inside the loop. Fixes: 486a5bc77a4a ('qlcnic: Add support for 83xx suspend and resume.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sfc: fix a timeout loopDan Carpenter2015-12-151-1/+1
| | | | | | | | | | | | | | | | | | We test for if "tries" is zero at the end but "tries--" is a post-op so it will end with "tries" set to -1. I have changed it to a pre-op instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qlge: fix a timeout loop in ql_change_rx_buffers()Dan Carpenter2015-12-151-2/+3
| | | | | | | | | | | | | | | | | | | | The problem here is that after the loop we test for "if (!i) " but because "i--" is a post-op we exit with i set to -1. I have fixed this by changing it to a pre-op instead. I had to change the starting value from 3 to 4 so that we still iterate 3 times. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * amd-xgbe: fix a couple timeout loopsDan Carpenter2015-12-151-2/+2
| | | | | | | | | | | | | | | | | | | | At the end of the loop we test "if (!count)" but because "count--" is a post-op then the loop will end with count set to -1. I have fixed this by changing it to --count. Fixes: c5aa9e3b8156 ('amd-xgbe: Initial AMD 10GbE platform driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * mISDN: fix a loop countDan Carpenter2015-12-151-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | There are two issue here. 1) cnt starts as maxloop + 1 so all these loops iterate one more time than intended. 2) At the end of the loop we test for "if (maxloop && !cnt)" but for the first two loops, we end with cnt equal to -1. Changing this to a pre-op means we end with cnt set to 0. Fixes: cae86d4a4e56 ('mISDN: Add driver for Infineon ISDN chipset family') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx4_core: fix handling return value of mlx4_slave_convert_portAndrzej Hajda2015-12-151-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function can return negative values, so its result should be assigned to signed variable. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Fixes: fc48866f7 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * pptp: verify sockaddr_len in pptp_bind() and pptp_connect()WANG Cong2015-12-151-0/+6
| | | | | | | | | | | | Reported-by: Dmitry Vyukov <dvyukov@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ravb: Add disable 10baseKazuya Mizuguchi2015-12-151-0/+3
| | | | | | | | | | | | | | | | Ethernet AVB does not support 10 Mbps transfer speed. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sh_eth: fix descriptor access endiannessSergei Shtylyov2015-12-151-10/+14
| | | | | | | | | | | | | | | | | | | | | | The driver never calls cpu_to_edmac() when writing the descriptor address and edmac_to_cpu() when reading it, although it should -- fix this. Note that the frame/buffer length descriptor field accesses also need fixing but since they are both 16-bit we can't use {cpu|edmac}_to_{edmac|cpu}()... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sh_eth: fix TX buffer byte-swappingSergei Shtylyov2015-12-151-2/+1
| | | | | | | | | | | | | | | | | | | | For the little-endian SH771x kernels the driver has to byte-swap the RX/TX buffers, however yet unset physcial address from the TX descriptor is used to call sh_eth_soft_swap(). Use 'skb->data' instead... Fixes: 31fcb99d9958 ("net: sh_eth: remove __flush_purge_region") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sh_eth: uninline sh_eth_{write|read}()Sergei Shtylyov2015-12-142-25/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3365711df024 ("sh_eth: WARN on access to a register not implemented in in a particular chip") added WARN_ON() to sh_eth_{read|write}(), thus making it unacceptable for these functions to be *inline* anymore. Remove *inline* and move the functions from the header to the driver itself. Below is our code economy with ARM gcc 4.7.3: $ size drivers/net/ethernet/renesas/sh_eth.o{~,} text data bss dec hex filename 32489 1140 0 33629 835d drivers/net/ethernet/renesas/sh_eth.o~ 25413 1140 0 26553 67b9 drivers/net/ethernet/renesas/sh_eth.o Suggested-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * stmmac: dwmac-sunxi: Call exit cleanup function in probe error pathChen-Yu Tsai2015-12-141-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dwmac-sunxi has 2 callbacks that were called from stmmac_platform as part of the probe and remove sequences. Ater the conversion of dwmac-sunxi into a standalone platform driver, the .init function is called before calling into the stmmac driver core, but .exit is not called to clean up if stmmac returns an error. This patch fixes the probe error path. This properly cleans up and releases resources when the driver core fails to probe. Cc: Joachim Eastwood <manabian@gmail.com> Fixes: 9a9e9a1edee8 ("stmmac: dwmac-sunxi: turn setup callback into a probe function") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: mdio-mux: Check return value of mdiobus_alloc()Tobias Klauser2015-12-141-1/+6
| | | | | | | | | | | | | | | | | | | | mdiobus_alloc() might return NULL, but its return value is not checked in mdio_mux_init(). This could potentially lead to a NULL pointer dereference. Fix it by checking the return value Fixes: 0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net:hns: print MAC with %pMAndy Shevchenko2015-12-141-35/+14
| | | | | | | | | | | | | | | | printf() has a dedicated specifier to print MAC addresses. Use it instead of pushing each byte via stack. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net:hns: annotate IO address space properlyAndy Shevchenko2015-12-141-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Mark address pointer with __iomem in the IO accessors. Otherwise we will get a sparse complain like following .../hns/hns_dsaf_reg.h:991:36: warning: incorrect type in argument 1 (different address spaces) .../hns/hns_dsaf_reg.h:991:36: expected unsigned char [noderef] [usertype] <asn:2>*base .../hns/hns_dsaf_reg.h:991:36: got void *base Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sfc: only use RSS filters if we're using RSSBert Kenward2015-12-123-13/+18
| | | | | | | | | | | | | | | | | | Without this, filter insertion on a VF would fail if only one channel was in use. This would include the unicast station filter and therefore no traffic would be received. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Implement missing tx timeout reset logic.Michael Chan2015-12-121-3/+13
| | | | | | | | | | | | | | | | | | | | | | The reset logic calls bnxt_close_nic() and bnxt_open_nic() under rtnl_lock from bnxt_sp_task. BNXT_STATE_IN_SP_TASK must be cleared before calling bnxt_close_nic() to avoid deadlock. v2: Fixed white space error. Thanks Dave. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Don't cancel sp_task from bnxt_close_nic().Michael Chan2015-12-122-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | When implementing driver reset from tx_timeout in the next patch, bnxt_close_nic() will be called from the sp_task workqueue. Calling cancel_work() on sp_task will hang the workqueue. Instead, set a new bit BNXT_STATE_IN_SP_TASK when bnxt_sp_task() is running. bnxt_close_nic() will wait for BNXT_STATE_IN_SP_TASK to clear before proceeding. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Change bp->state to bitmap.Michael Chan2015-12-123-8/+7
| | | | | | | | | | | | | | | | This allows multiple independent bits to be set for various states. Subsequent patches to implement tx timeout reset will require this. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Fix bitmap declaration to work on 32-bit arches.Michael Chan2015-12-121-6/+5
| | | | | | | | | | | | | | | | | | The declaration of the bitmap vf_req_snif_bmap using fixed array of unsigned long will only work on 64-bit archs. Use DECLARE_BITMAP instead which will work on all archs. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * phy: micrel: Fix finding PHY properties in MAC node.Andrew Lunn2015-12-121-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8b63ec1837fa ("phylib: Make PHYs children of their MDIO bus, not the bus' parent.") changed the parenting of PHY devices, making them a child of the MDIO bus, instead of the MAC device. This broken the Micrel PHY driver which has a deprecated feature of allowing PHY properties to be placed into the MAC node. In order to find the MAC node, we need to walk up the tree of devices until we find one with an OF node attached. Reported-by: Dinh Nguyen <dinguyen@opensource.altera.com> Suggested-by: David Daney <david.daney@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Fixes: 8b63ec1837fa ("phylib: Make PHYs children of their MDIO bus, not the bus' parent.") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ezchip: fix address space confusion in nps_enet.cArnd Bergmann2015-12-091-21/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nps_enet driver happily mixes virtual, physical and __iomem addresses, which are all different depending on the architecture and configuration. That causes a warning when building the code on ARM with LPAE mode enabled: drivers/net/ethernet/ezchip/nps_enet.c: In function 'nps_enet_send_frame': drivers/net/ethernet/ezchip/nps_enet.c:370:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] but will also fail to work for other reasons. In this patch, I'm trying to change the code to use only normal kernel pointers, which I assume is what the author actually meant: * For reading or writing a 32-bit word that may be unaligned when an SKB contains unaligned data, I'm using get_unaligned/put_unaligned() rather than memcpy_fromio/toio. * For converting a u8 pointer to a u32 pointer, I use a cast rather than the incorrect virt_to_phys. * For copying a couple of bytes from one place to another while respecting alignment, I use memcpy instead of memcpy_toio. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fsl: avoid 64-bit warning on pq_mdioArnd Bergmann2015-12-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pq_mdio driver can now be built for ARM64, where we get a format string warning: drivers/net/ethernet/freescale/fsl_pq_mdio.c: In function 'fsl_pq_mdio_probe': drivers/net/ethernet/freescale/fsl_pq_mdio.c:467:25: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'long int' [-Wformat=] The argument is an implicit ptrdiff_t from the subtraction of two pointers, so we should use the %z format string modifier to make this work on 64-bit architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: fe761bcb9046 ("net: fsl: expands dependencies of NET_VENDOR_FREESCALE") Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8152: fix lockup when runtime PM is enabledPeter Wu2015-12-091-18/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an interface is brought up which was previously suspended (via runtime PM), it would hang. This happens because napi_disable is called before napi_enable. Solve this by avoiding napi_enable in the resume during open function (netif_running is true when open is called, IFF_UP is set after a successful open; netif_running is false when close is called, but IFF_UP is then still set). While at it, remove WORK_ENABLE check from rtl8152_open (introduced with the original change) because it cannot happen: - After this patch, runtime resume will not set it during rtl8152_open. - When link is up, rtl8152_open is not called. - When link is down during system/auto suspend/resume, it is not set. Fixes: 41cec84cf285 ("r8152: don't enable napi before rx ready") Link: https://lkml.kernel.org/r/20151205105912.GA1766@al Signed-off-by: Peter Wu <peter@lekensteyn.nl> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: thunderx: Correctly distinguish between VF and LMAC countPavel Fedin2015-12-091-21/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bc69fdfc6c13 ("net: thunderx: Enable BGX LMAC's RX/TX only after VF is up") introduces lmac_cnt member and starts verifying VF number against it. This is plain wrong, and works only because currently we have hardcoded 1:1 mapping between VFs and LMACs, and in this case num_vf_en and lmac_cnt are always equal. However in future this may change, and the code will badly misbehave. The worst consequence of this is failure to deliver link status messages, causing VFs to go defunct because since commit 0b72a9a1060e ("net: thunderx: Switchon carrier only upon interface link up") VF will not fully bring itself up without it. This patch fixes the potential problem by doing VF number checks against the num_vf_en. Since lmac_cnt is not used anywhere else, it is removed. Additionally some duplicated code is factored out into nic_enable_vf() Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * geneve: Fix IPv6 xmit stats update.Pravin B Shelar2015-12-091-2/+0
| | | | | | | | | | | | | | | | | | Call to iptunnel_xmit_stats() is not required after udp-tunnel6-xmit. By calling iptunnel_xmit_stats() results in incorrect device stats. Following patch drops this call. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * vxlan: interpret IP headers for ECN correctlyJiri Benc2015-12-071-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | When looking for outer IP header, use the actual socket address family, not the address family of the default destination which is not set for metadata based interfaces (and doesn't have to match the address family of the received packet even if it was set). Fix also the misleading comment. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * vxlan: support ndo_fill_metadata_dst also for IPv6Jiri Benc2015-12-071-2/+23
| | | | | | | | | | | | | | | | | | Fill the metadata correctly even when tunneling over IPv6. Also, check that the provided metadata is of an address family that is supported by the tunnel. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * vxlan: move IPv6 outpute route calculation to a functionJiri Benc2015-12-071-10/+34
| | | | | | | | | | | | | | Will be used also for ndo_fill_metadata_dst. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qed: Correct slowpath interrupt schemeSudarsana Kalluru2015-12-074-52/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using INTa, ISR might be called before device is configured for INTa [E.g., due to other device asserting the shared interrupt line], in which case the ISR would read the SISR registers that shouldn't be read unless HW is already configured for INTa. This might break interrupts later on. There's also an MSI-X issue due to this difference, although it's mostly theoretical. This patch changes the initialization order, calling request_irq() for the slowpath interrupt only after the chip is configured for working in the preferred interrupt mode. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qed: Fix BAR size split for some serversAriel Elior2015-12-072-21/+36
| | | | | | | | | | | | | | | | | | | | | | Can't rely on pci config space to discover bar size, as in some environments this returns a wrong, too large value. Instead, rely on device register, which contains the value provided by MFW at preboot. Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qed: fix handling of concurrent ramrods.Tomer Tayar2015-12-072-17/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Concurrent non-blocking slowpath ramrods can be completed out-of-order on the completion chain. Recycling completed elements, while previously sent elements are still completion pending, can lead to overriding of active elements on the chain. Furthermore, sending pending slowpath ramrods currently lacks the update of the chain element physical pointer. This patch: * Ensures that ramrods are sent to the FW with consecutive echo values. * Handles out-of-order completions by freeing only first successive completed entries. * Updates the chain element physical pointer when copying a pending element into a free element for sending. Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ethernet: aurora: AURORA_NB8800 should depend on HAS_DMAGeert Uytterhoeven2015-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If NO_DMA=y: ERROR: "dma_map_single" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_unmap_page" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_map_page" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/aurora/nb8800.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qca_spi: fix transmit queue timeout handlingStefan Wahren2015-12-061-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | In case of a tx queue timeout every transmit is blocked until the QCA7000 resets himself and triggers a sync which makes the driver flushs the tx ring. So avoid this blocking situation by triggering the sync immediately after the timeout. Waking the queue doesn't make sense in this situation. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: cdc_mbim: add "NDP to end" quirk for Huawei E3372Bjørn Mork2015-12-062-2/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Huawei E3372 (12d1:157d) needs this quirk in MBIM mode as well. Allow this by forcing the NTB to contain only a single NDP, and add a device specific entry for this ID. Due to the way Huawei use device IDs, this might be applied to other modems as well. It is assumed that those modems will be based on the same firmware and will need this quirk too. If not, it will still not harm normal usage, although multiplexing performance could be impacted. Cc: Enrico Mioso <mrkiko.rs@gmail.com> Reported-by: Sami Farin <hvtaifwkbgefbaei@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-By: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * stmmac: fix resource management when resumeGiuseppe CAVALLARO2015-12-051-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a memleak when suspend/resume this driver version. Currently the stmmac, during resume step, reallocates all the resources but they are not released when suspend. The patch is not to release these resources but the logic has been changed. In fact, it is not necessary to free and reallocate all from scratch because the memory data will be always preserved. As final solution, the patch just reinit the descriptors and the rx/tx pointers only when resume. Tested done on STi boxes. Reported-by: ZhengShunQian <zhengsq@rock-chips.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ravb: fix RX queue #1 frame error counter nameSergei Shtylyov2015-12-051-1/+1
| | | | | | | | | | | | | | | | The Rx queue #1 frame error counter name contains trailing underscore, probably due to a typo... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sh_eth: fix kernel oops in skb_put()Sergei Shtylyov2015-12-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In a low memory situation the following kernel oops occurs: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = 8490c000 [00000050] *pgd=4651e831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.4-at16 #9) PC is at skb_put+0x10/0x98 LR is at sh_eth_poll+0x2c8/0xa10 pc : [<8035f780>] lr : [<8028bf50>] psr: 60000113 sp : 84eb1a90 ip : 84eb1ac8 fp : 84eb1ac4 r10: 0000003f r9 : 000005ea r8 : 00000000 r7 : 00000000 r6 : 940453b0 r5 : 00030000 r4 : 9381b180 r3 : 00000000 r2 : 00000000 r1 : 000005ea r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 4248c059 DAC: 00000015 Process klogd (pid: 2046, stack limit = 0x84eb02e8) [...] This is because netdev_alloc_skb() fails and 'mdp->rx_skbuff[entry]' is left NULL but sh_eth_rx() later uses it without checking. Add such check... Reported-by: Yasushi SHOJI <yashi@atmark-techno.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'master' of ↵David S. Miller2015-12-055-13/+23
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-12-03 This series contains updates to ixgbe, i40e/i40evf, MAINTAINERS and e100.txt Alex provides a fix for ixgbe where enabling SR-IOV and then bringing the interface up was resulting in the PF MAC addresses getting into a bad state. The workaround for this issue is to bring up the interface first and then enable SR-IOV as this will trigger the reset in the existing code. I clean up legacy license stuff in the e100.txt documentation and then update the maintainers/reviewers list for our drivers. Jesse fixes an issue with the i40e/i40evf drivers, where if the driver were to happen to have a mutex held while the i40e_init_adminq() call was called, the init_adminq might inadvertently call mutex_init on a lock that was held which is a violation of the calling semantices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * i40e/i40evf: avoid mutex re-initJesse Brandeburg2015-12-034-13/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the driver were to happen to have a mutex held while the i40e_init_adminq call was called, the init_adminq might inadvertently call mutex_init on a lock that was held which is a violation of the calling semantics. Fix this by avoiding adminq.c code allocating/freeing this memory, and then do the same work only once in probe/remove. Testing Hints (Required if no HSD): for VF, load i40evf in bare metal and echo 32 > sriov_numvfs; echo 0 > sriov_numvfs in a loop. Yes this is a horrible thing to do. Change-ID: Ida263c51b34e195252179e7e5e400d73a99be7a2 Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 21:57:10 +0100