summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* iommu/vt-d: Flush PASID-based iotlb for iova over first levelLu Baolu2020-01-072-15/+82
| | | | | | | | | When software has changed first-level tables, it should invalidate the affected IOTLB and the paging-structure-caches using the PASID- based-IOTLB Invalidate Descriptor defined in spec 6.5.2.4. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Setup pasid entries for iova over first levelLu Baolu2020-01-071-5/+52
| | | | | | | | | | | Intel VT-d in scalable mode supports two types of page tables for IOVA translation: first level and second level. The IOMMU driver can choose one from both for IOVA translation according to the use case. This sets up the pasid entry if a domain is selected to use the first-level page table for iova translation. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Add PASID_FLAG_FL5LP for first-level pasid setupLu Baolu2020-01-073-7/+14
| | | | | | | | | | | | | Current intel_pasid_setup_first_level() use 5-level paging for first level translation if CPUs use 5-level paging mode too. This makes sense for SVA usages since the page table is shared between CPUs and IOMMUs. But it makes no sense if we only want to use first level for IOVA translation. Add PASID_FLAG_FL5LP bit in the flags which indicates whether the 5-level paging mode should be used. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attrLu Baolu2020-01-071-0/+56
| | | | | | | | | | | | | This adds the Intel VT-d specific callback of setting DOMAIN_ATTR_NESTING domain attribution. It is necessary to let the VT-d driver know that the domain represents a virtual machine which requires the IOMMU hardware to support nested translation mode. Return success if the IOMMU hardware suports nested mode, otherwise failure. Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Identify domains using first level page tableLu Baolu2020-01-071-0/+39
| | | | | | | | This checks whether a domain should use the first level page table for map/unmap and marks it in the domain structure. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Loose requirement for flush queue initializatonLu Baolu2020-01-071-8/+6
| | | | | | | | | | | Currently if flush queue initialization fails, we return error or enforce the system-wide strict mode. These are unnecessary because we always check the existence of a flush queue before queuing any iova's for lazy flushing. Printing a informational message is enough. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Avoid iova flush queue in strict modeLu Baolu2020-01-071-9/+15
| | | | | | | | If Intel IOMMU strict mode is enabled by users, it's unnecessary to create the iova flush queue. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: trace: Extend map_sg trace eventLu Baolu2020-01-071-2/+5
| | | | | | | | | | | | | | | | | | | | Current map_sg stores trace message in a coarse manner. This extends it so that more detailed messages could be traced. The map_sg trace message looks like: map_sg: dev=0000:00:17.0 [1/9] dev_addr=0xf8f90000 phys_addr=0x158051000 size=4096 map_sg: dev=0000:00:17.0 [2/9] dev_addr=0xf8f91000 phys_addr=0x15a858000 size=4096 map_sg: dev=0000:00:17.0 [3/9] dev_addr=0xf8f92000 phys_addr=0x15aa13000 size=4096 map_sg: dev=0000:00:17.0 [4/9] dev_addr=0xf8f93000 phys_addr=0x1570f1000 size=8192 map_sg: dev=0000:00:17.0 [5/9] dev_addr=0xf8f95000 phys_addr=0x15c6d0000 size=4096 map_sg: dev=0000:00:17.0 [6/9] dev_addr=0xf8f96000 phys_addr=0x157194000 size=4096 map_sg: dev=0000:00:17.0 [7/9] dev_addr=0xf8f97000 phys_addr=0x169552000 size=4096 map_sg: dev=0000:00:17.0 [8/9] dev_addr=0xf8f98000 phys_addr=0x169dde000 size=4096 map_sg: dev=0000:00:17.0 [9/9] dev_addr=0xf8f99000 phys_addr=0x148351000 size=4096 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Misc macro clean up for SVMJacob Pan2020-01-071-40/+39
| | | | | | | | | | | Use combined macros for_each_svm_dev() to simplify SVM device iteration and error checking. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Avoid sending invalid page responseJacob Pan2020-01-071-4/+3
| | | | | | | | | | | | Page responses should only be sent when last page in group (LPIG) or private data is present in the page request. This patch avoids sending invalid descriptors. Fixes: 5d308fc1ecf53 ("iommu/vt-d: Add 256-bit invalidation descriptor support") Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Replace Intel specific PASID allocator with IOASIDJacob Pan2020-01-074-56/+30
| | | | | | | | | | Make use of generic IOASID code to manage PASID allocation, free, and lookup. Replace Intel specific code. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Fix off-by-one in PASID allocationJacob Pan2020-01-071-1/+1
| | | | | | | | | | | | PASID allocator uses IDR which is exclusive for the end of the allocation range. There is no need to decrement pasid_max. Fixes: af39507305fb ("iommu/vt-d: Apply global PASID in SVA") Reported-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Avoid duplicated code for PASID setupJacob Pan2020-01-071-30/+18
| | | | | | | | | | | After each setup for PASID entry, related translation caches must be flushed. We can combine duplicated code into one function which is less error prone. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Reject SVM bind for failed capability checkJacob Pan2020-01-071-0/+3
| | | | | | | | | | Add a check during SVM bind to ensure CPU and IOMMU hardware capabilities are met. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Match CPU and IOMMU paging modeJacob Pan2020-01-071-2/+10
| | | | | | | | | | | | | | | | | | | | When setting up first level page tables for sharing with CPU, we need to ensure IOMMU can support no less than the levels supported by the CPU. It is not adequate, as in the current code, to set up 5-level paging in PASID entry First Level Paging Mode(FLPM) solely based on CPU. Currently, intel_pasid_setup_first_level() is only used by native SVM code which already checks paging mode matches. However, future use of this helper function may not be limited to native SVM. https://lkml.org/lkml/2019/11/18/1037 Fixes: 437f35e1cd4c8 ("iommu/vt-d: Add first level page table interface") Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Fix CPU and IOMMU SVM feature matching checksJacob Pan2020-01-072-21/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Shared Virtual Memory(SVM) is based on a collective set of hardware features detected at runtime. There are requirements for matching CPU and IOMMU capabilities. The current code checks CPU and IOMMU feature set for SVM support but the result is never stored nor used. Therefore, SVM can still be used even when these checks failed. The consequences can be: 1. CPU uses 5-level paging mode for virtual address of 57 bits, but IOMMU can only support 4-level paging mode with 48 bits address for DMA. 2. 1GB page size is used by CPU but IOMMU does not support it. VT-d unrecoverable faults may be generated. The best solution to fix these problems is to prevent them in the first place. This patch consolidates code for checking PASID, CPU vs. IOMMU paging mode compatibility, as well as provides specific error messages for each failed checks. On sane hardware configurations, these error message shall never appear in kernel log. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Add Kconfig option to enable/disable scalable modeLu Baolu2020-01-072-1/+18
| | | | | | | | | This adds Kconfig option INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON to make it easier for distributions to enable or disable the Intel IOMMU scalable mode by default during kernel build. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* Merge tag 'block-5.5-20191221' of git://git.kernel.dk/linux-blockLinus Torvalds2019-12-225-27/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block fixes from Jens Axboe: "Let's try this one again, this time without the compat_ioctl changes. We've got those fixed up, but that can go out next week. This contains: - block queue flush lockdep annotation (Bart) - Type fix for bsg_queue_rq() (Bart) - Three dasd fixes (Stefan, Jan) - nbd deadlock fix (Mike) - Error handling bio user map fix (Yang) - iocost fix (Tejun) - sbitmap waitqueue addition fix that affects the kyber IO scheduler (David)" * tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block: sbitmap: only queue kyber's wait callback if not already active block: fix memleak when __blk_rq_map_user_iov() is failed s390/dasd: fix typo in copyright statement s390/dasd: fix memleak in path handling error case s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly block: Fix a lockdep complaint triggered by request queue flushing block: Fix the type of 'sts' in bsg_queue_rq() block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT nbd: fix shutdown and recv work deadlock v2 iocost: over-budget forced IOs should schedule async delay
| * s390/dasd: fix typo in copyright statementStefan Haberland2019-12-202-2/+2
| | | | | | | | | | | | | | | | coypright -> copyright Reported-by: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * s390/dasd: fix memleak in path handling error caseStefan Haberland2019-12-201-17/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If for whatever reason the dasd_eckd_check_characteristics() function exits after at least some paths have their configuration data allocated those data is never freed again. In the error case the device->private pointer is set to NULL and dasd_eckd_uncheck_device() will exit without freeing the path data because of this NULL pointer. Fix by calling dasd_eckd_clear_conf_data() for error cases. Also use dasd_eckd_clear_conf_data() in dasd_eckd_uncheck_device() to avoid code duplication. Reported-by: Qian Cai <cai@lca.pw> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * s390/dasd/cio: Interpret ccw_device_get_mdc return value correctlyJan Höppner2019-12-202-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The max data count (mdc) is an unsigned 16-bit integer value as per AR documentation and is received via ccw_device_get_mdc() for a specific path mask from the CIO layer. The function itself also always returns a positive mdc value or 0 in case mdc isn't supported or couldn't be determined. Though, the comment for this function describes a negative return value to indicate failures. As a result, the DASD device driver interprets the return value of ccw_device_get_mdc() incorrectly. The error case is essentially a dead code path. To fix this behaviour, check explicitly for a return value of 0 and change the comment for ccw_device_get_mdc() accordingly. This fix merely enables the error code path in the DASD functions get_fcx_max_data() and verify_fcx_max_data(). The actual functionality stays the same and is still correct. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * nbd: fix shutdown and recv work deadlock v2Mike Christie2019-12-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a regression added with: commit e9e006f5fcf2bab59149cb38a48a4817c1b538b4 Author: Mike Christie <mchristi@redhat.com> Date: Sun Aug 4 14:10:06 2019 -0500 nbd: fix max number of supported devs where we can deadlock during device shutdown. The problem occurs if the recv_work's nbd_config_put occurs after nbd_start_device_ioctl has returned and the userspace app has droppped its reference via closing the device and running nbd_release. The recv_work nbd_config_put call would then drop the refcount to zero and try to destroy the config which would try to do destroy_workqueue from the recv work. This patch just has nbd_start_device_ioctl do a flush_workqueue when it wakes so we know after the ioctl returns running works have exited. This also fixes a possible race where we could try to reuse the device while old recv_works are still running. Cc: stable@vger.kernel.org Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | Merge tag 'riscv/for-v5.5-rc3' of ↵Linus Torvalds2019-12-226-1/+194
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Several fixes, and one cleanup, for RISC-V. Fixes: - Fix an error in a Kconfig file that resulted in an undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix scratch register clearing in M-mode (affects nommu users) - Fix a mismerge on my part that broke the build for CONFIG_SPARSEMEM_VMEMMAP users Cleanup: - Move SiFive L2 cache-related code to drivers/soc, per request" * tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: move sifive_l2_cache.c to drivers/soc riscv: define vmemmap before pfn_to_page calls riscv: fix scratch register clearing in M-mode. riscv: Fix use of undefined config option CONFIG_CONFIG_MMU
| * | riscv: move sifive_l2_cache.c to drivers/socChristoph Hellwig2019-12-206-1/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sifive_l2_cache.c is in no way related to RISC-V architecture memory management. It is a little stub driver working around the fact that the EDAC maintainers prefer their drivers to be structured in a certain way that doesn't fit the SiFive SOCs. Move the file to drivers/soc and add a Kconfig option for it, as well as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE. Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Borislav Petkov <bp@suse.de> [paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2019-12-2285-423/+723
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ...
| * | | sfc: Include XDP packet headroom in buffer step size.Charles McLachlan2019-12-211-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct a mismatch between rx_page_buf_step and the actual step size used when filling buffer pages. This patch fixes the page overrun that occured when the MTU was set to anything bigger than 1692. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | sfc: fix channel allocation with brute forceEdward Cree2019-12-212-22/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was possible for channel allocation logic to get confused between what it had and what it wanted, and end up trying to use the same channel for both PTP and regular TX. This led to a kernel panic: BUG: unable to handle page fault for address: 0000000000047635 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0-rc3-ehc14+ #900 Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013 RIP: 0010:native_queued_spin_lock_slowpath+0x188/0x1e0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb e8 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 c0 98 02 00 48 03 04 f5 a0 c6 ed 81 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffc90000003d28 EFLAGS: 00010006 RAX: 0000000000047635 RBX: 0000000000000246 RCX: 0000000000040000 RDX: ffff888627a298c0 RSI: 0000000000003ffe RDI: ffff88861f6b8dd4 RBP: ffff8886225c6e00 R08: 0000000000040000 R09: 0000000000000000 R10: 0000000616f080c6 R11: 00000000000000c0 R12: ffff88861f6b8dd4 R13: ffffc90000003dc8 R14: ffff88861942bf00 R15: ffff8886150f2000 FS: 0000000000000000(0000) GS:ffff888627a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000047635 CR3: 000000000200a000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x22/0x30 skb_queue_tail+0x1b/0x50 sock_queue_err_skb+0x9d/0xf0 __skb_complete_tx_timestamp+0x9d/0xc0 efx_dequeue_buffer+0x126/0x180 [sfc] efx_xmit_done+0x73/0x1c0 [sfc] efx_ef10_ev_process+0x56a/0xfe0 [sfc] ? tick_sched_do_timer+0x60/0x60 ? timerqueue_add+0x5d/0x70 ? enqueue_hrtimer+0x39/0x90 efx_poll+0x111/0x380 [sfc] ? rcu_accelerate_cbs+0x50/0x160 net_rx_action+0x14a/0x400 __do_softirq+0xdd/0x2d0 irq_exit+0xa0/0xb0 do_IRQ+0x53/0xe0 common_interrupt+0xf/0xf </IRQ> In the long run we intend to rewrite the channel allocation code, but for 'net' fix this by allocating extra_channels, and giving them TX queues, even if we do not in fact need them (e.g. on NICs without MAC TX timestamping), and thereby using simpler logic to assign the channels once they're allocated. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | hv_netvsc: Fix unwanted rx_table resetHaiyang Zhang2019-12-213-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In existing code, the receive indirection table, rx_table, is in struct rndis_device, which will be reset when changing MTU, ringparam, etc. User configured receive indirection table values will be lost. To fix this, move rx_table to struct net_device_context, and check netif_is_rxfh_configured(), so rx_table will be set to default only if no user configured value. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: phy: ensure that phy IDs are correctly typedRussell King2019-12-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PHY IDs are 32-bit unsigned quantities. Ensure that they are always treated as such, and not passed around as "int"s. Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | qede: Disable hardware gro when xdp prog is installedManish Chopra2019-12-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") introduced a regression in driver that when xdp program is installed on qede device, device's aggregation feature (hardware GRO) is not getting disabled, which is unexpected with xdp. Fixes: 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: ena: fix issues in setting interrupt moderation params in ethtoolArthur Kiyanovski2019-12-211-14/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue 1: -------- Reproduction steps: 1. sudo ethtool -C eth0 rx-usecs 128 2. sudo ethtool -C eth0 adaptive-rx on 3. sudo ethtool -C eth0 adaptive-rx off 4. ethtool -c eth0 expected output: rx-usecs 128 actual output: rx-usecs 0 Reason for issue: In stage 3, ethtool userspace calls first the ena_get_coalesce() handler to get the current value of all properties, and then the ena_set_coalesce() handler. When ena_get_coalesce() is called the adaptive interrupt moderation is still on. There is an if in the code that returns the rx_coalesce_usecs only if the adaptive interrupt moderation is off. And since it is still on, rx_coalesce_usecs is not set, meaning it stays 0. Solution to issue: Remove this if static interrupt moderation intervals have nothing to do with dynamic ones. Issue 2: -------- Reproduction steps: 1. sudo ethtool -C eth0 adaptive-rx on 2. sudo ethtool -C eth0 rx-usecs 128 3. ethtool -c eth0 expected output: rx-usecs 128 actual output: rx-usecs 0 Reason for issue: In stage 2, when ena_set_coalesce() is called, the handler tests if rx adaptive interrupt moderation is on, and if it is, it returns before getting to the part in the function that sets the rx non-adaptive interrupt moderation interval. Solution to issue: Remove the return from the function when rx adaptive interrupt moderation is on. Also cleaned up the fixed code in ena_set_coalesce by grouping together adaptive interrupt moderation toggling, and using && instead of nested ifs. Fixes: b3db86dc4b82 ("net: ena: reimplement set/get_coalesce()") Fixes: 0eda847953d8 ("net: ena: fix retrieval of nonadaptive interrupt moderation intervals") Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: ena: fix default tx interrupt moderation intervalArthur Kiyanovski2019-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current default non-adaptive tx interrupt moderation interval is 196 us. This value is too high and might cause the tx queue to fill up. In this commit we set the default non-adaptive tx interrupt moderation interval to 64 us in order to: 1. Reduce the probability of the queue filling-up (when compared to the current default value of 196 us). 2. Reduce unnecessary tx interrupt overhead (which happens if we set the default tx interval to 0). We determined experimentally that 64 us is an optimal value that reduces interrupt rate by more than 20% without affecting performance. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: stmmac: platform: Fix MDIO init for platforms without PHYPadmanabhan Rajanbabu2019-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation of "stmmac_dt_phy" function initializes the MDIO platform bus data, even in the absence of PHY. This fix will skip MDIO initialization if there is no PHY present. Fixes: 7437127 ("net: stmmac: Convert to phylink and remove phylib logic") Acked-by: Jayati Sahu <jayati.sahu@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: hisilicon: Fix a BUG trigered by wrong bytes_complJiangfeng Xiao2019-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When doing stress test, we get the following trace: kernel BUG at lib/dynamic_queue_limits.c:26! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: hip04_eth CPU: 0 PID: 2003 Comm: tDblStackPcap0 Tainted: G O L 4.4.197 #1 Hardware name: Hisilicon A15 task: c3637668 task.stack: de3bc000 PC is at dql_completed+0x18/0x154 LR is at hip04_tx_reclaim+0x110/0x174 [hip04_eth] pc : [<c041abfc>] lr : [<bf0003a8>] psr: 800f0313 sp : de3bdc2c ip : 00000000 fp : c020fb10 r10: 00000000 r9 : c39b4224 r8 : 00000001 r7 : 00000046 r6 : c39b4000 r5 : 0078f392 r4 : 0078f392 r3 : 00000047 r2 : 00000000 r1 : 00000046 r0 : df5d5c80 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 1e189b80 DAC: 55555555 Process tDblStackPcap0 (pid: 2003, stack limit = 0xde3bc190) Stack: (0xde3bdc2c to 0xde3be000) [<c041abfc>] (dql_completed) from [<bf0003a8>] (hip04_tx_reclaim+0x110/0x174 [hip04_eth]) [<bf0003a8>] (hip04_tx_reclaim [hip04_eth]) from [<bf0012c0>] (hip04_rx_poll+0x20/0x388 [hip04_eth]) [<bf0012c0>] (hip04_rx_poll [hip04_eth]) from [<c04c8d9c>] (net_rx_action+0x120/0x374) [<c04c8d9c>] (net_rx_action) from [<c021eaf4>] (__do_softirq+0x218/0x318) [<c021eaf4>] (__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac) [<c021eea0>] (irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4) [<c0240130>] (msa_irq_exit) from [<c0267ba8>] (__handle_domain_irq+0x110/0x148) [<c0267ba8>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0558360>] (__irq_svc+0x40/0x58) Exception stack(0xde3bdde0 to 0xde3bde28) dde0: 00000000 00008001 c3637668 00000000 00000000 a00f0213 dd3627a0 c0af6380 de00: c086d380 a00f0213 c0a22a50 de3bde6c 00000002 de3bde30 c0558138 c055813c de20: 600f0213 ffffffff [<c0558360>] (__irq_svc) from [<c055813c>] (_raw_spin_unlock_irqrestore+0x44/0x54) Kernel panic - not syncing: Fatal exception in interrupt Pre-modification code: int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) { [...] [1] priv->tx_head = TX_NEXT(tx_head); [2] count++; [3] netdev_sent_queue(ndev, skb->len); [...] } An rx interrupt occurs if hip04_mac_start_xmit just executes to the line 2, tx_head has been updated, but corresponding 'skb->len' has not been added to dql_queue. And then hip04_mac_interrupt->__napi_schedule->hip04_rx_poll->hip04_tx_reclaim In hip04_tx_reclaim, because tx_head has been updated, bytes_compl will plus an additional "skb-> len" which has not been added to dql_queue. And then trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed). To solve the problem described above, we put "netdev_sent_queue(ndev, skb->len);" before "priv->tx_head = TX_NEXT(tx_head);" Fixes: a41ea46a9a12 ("net: hisilicon: new hip04 ethernet driver") Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | s390/qeth: don't return -ENOTSUPP to userspaceJulian Wiedmann2019-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ENOTSUPP is not uapi, use EOPNOTSUPP instead. Fixes: d66cb37e9664 ("qeth: Add new priority queueing options") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | s390/qeth: fix promiscuous mode after resetJulian Wiedmann2019-12-213-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When managing the promiscuous mode during an RX modeset, qeth caches the current HW state to avoid repeated programming of the same state on each modeset. But while tearing down a device, we forget to clear the cached state. So when the device is later set online again, the initial RX modeset doesn't program the promiscuous mode since we believe it is already enabled. Fix this by clearing the cached state in the tear-down path. Note that for the SBP variant of promiscuous mode, this accidentally works right now because we unconditionally restore the SBP role while re-initializing. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | s390/qeth: handle error due to unsupported transport modeJulian Wiedmann2019-12-212-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Along with z/VM NICs, there's additional device types that only support a specific transport mode (eg. external-bridged IQD). Identify the corresponding error code, and raise a fitting error message so that the user knows to adjust their device configuration. On top of that also fix the subsequent error path, so that the rejected cmd doesn't need to wait for a timeout but gets cancelled straight away. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | cxgb4: fix refcount init for TC-MQPRIO offloadRahul Lakkireddy2019-12-201-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Properly initialize refcount to 1 when hardware queue arrays for TC-MQPRIO offload have been freshly allocated. Otherwise, following warning is observed. Also fix up error path to only free hardware queue arrays when refcount reaches 0. [ 130.075342] ------------[ cut here ]------------ [ 130.075343] refcount_t: addition on 0; use-after-free. [ 130.075355] WARNING: CPU: 0 PID: 10870 at lib/refcount.c:25 refcount_warn_saturate+0xe1/0x100 [ 130.075356] Modules linked in: sch_mqprio iptable_nat ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_umad iw_cxgb4 libcxgb ib_uverbs x86_pkg_temp_thermal cxgb4 igb [ 130.075361] CPU: 0 PID: 10870 Comm: tc Kdump: loaded Not tainted 5.5.0-rc1+ #11 [ 130.075362] Hardware name: Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F/X9SRE/X9SRE-3F/X9SRi/X9SRi-3F, BIOS 3.2 01/16/2015 [ 130.075363] RIP: 0010:refcount_warn_saturate+0xe1/0x100 [ 130.075364] Code: e8 14 41 c1 ff 0f 0b c3 80 3d 44 f4 10 01 00 0f 85 63 ff ff ff 48 c7 c7 38 9f 83 8c 31 c0 c6 05 2e f4 10 01 01 e8 ef 40 c1 ff <0f> 0b c3 48 c7 c7 10 9f 83 8c 31 c0 c6 05 17 f4 10 01 01 e8 d7 40 [ 130.075365] RSP: 0018:ffffa48d00c0b768 EFLAGS: 00010286 [ 130.075366] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 130.075366] RDX: 0000000000000001 RSI: 0000000000000096 RDI: ffff8a2e9fa187d0 [ 130.075367] RBP: ffff8a2e93890000 R08: 0000000000000398 R09: 000000000000003c [ 130.075367] R10: 00000000000142a0 R11: 0000000000000397 R12: ffffa48d00c0b848 [ 130.075368] R13: ffff8a2e94746498 R14: ffff8a2e966f7000 R15: 0000000000000031 [ 130.075368] FS: 00007f689015f840(0000) GS:ffff8a2e9fa00000(0000) knlGS:0000000000000000 [ 130.075369] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.075369] CR2: 00000000006762a0 CR3: 00000007cf164005 CR4: 00000000001606f0 [ 130.075370] Call Trace: [ 130.075377] cxgb4_setup_tc_mqprio+0xbee/0xc30 [cxgb4] [ 130.075382] ? cxgb4_ethofld_restart+0x50/0x50 [cxgb4] [ 130.075384] ? pfifo_fast_init+0x7e/0xf0 [ 130.075386] mqprio_init+0x5f4/0x630 [sch_mqprio] [ 130.075389] qdisc_create+0x1bf/0x4a0 [ 130.075390] tc_modify_qdisc+0x1ff/0x770 [ 130.075392] rtnetlink_rcv_msg+0x28b/0x350 [ 130.075394] ? rtnl_calcit.isra.32+0x110/0x110 [ 130.075395] netlink_rcv_skb+0xc6/0x100 [ 130.075396] netlink_unicast+0x1db/0x330 [ 130.075397] netlink_sendmsg+0x2f5/0x460 [ 130.075399] ? _copy_from_user+0x2e/0x60 [ 130.075400] sock_sendmsg+0x59/0x70 [ 130.075401] ____sys_sendmsg+0x1f0/0x230 [ 130.075402] ? copy_msghdr_from_user+0xd7/0x140 [ 130.075403] ___sys_sendmsg+0x77/0xb0 [ 130.075404] ? ___sys_recvmsg+0x84/0xb0 [ 130.075406] ? __handle_mm_fault+0x377/0xaf0 [ 130.075407] __sys_sendmsg+0x53/0xa0 [ 130.075409] do_syscall_64+0x44/0x130 [ 130.075412] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 130.075413] RIP: 0033:0x7f688f13af10 [ 130.075414] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 [ 130.075414] RSP: 002b:00007ffe6c7d9988 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 130.075415] RAX: ffffffffffffffda RBX: 00000000006703a0 RCX: 00007f688f13af10 [ 130.075415] RDX: 0000000000000000 RSI: 00007ffe6c7d99f0 RDI: 0000000000000003 [ 130.075416] RBP: 000000005df38312 R08: 0000000000000002 R09: 0000000000008000 [ 130.075416] R10: 00007ffe6c7d93e0 R11: 0000000000000246 R12: 0000000000000000 [ 130.075417] R13: 00007ffe6c7e9c50 R14: 0000000000000001 R15: 000000000067c600 [ 130.075418] ---[ end trace 8fbb3bf36a8671db ]--- v2: - Move the refcount_set() closer to where the hardware queue arrays are being allocated. - Fix up error path to only free hardware queue arrays when refcount reaches 0. Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | nfc: s3fwrn5: replace the assertion with a WARN_ONAditya Pakki2019-12-201-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In s3fwrn5_fw_recv_frame, if fw_info->rsp is not empty, the current code causes a crash via BUG_ON. However, s3fwrn5_fw_send_msg does not crash in such a scenario. The patch replaces the BUG_ON by returning the error to the callers and frees up skb. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: macb: fix probing of PHY not described in the dtAntoine Tenart2019-12-201-4/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the case where the PHY isn't described in the device tree. This is due to the way the MDIO bus is registered in the driver: whether the PHY is described in the device tree or not, the bus is registered through of_mdiobus_register. The function masks all the PHYs and only allow probing the ones described in the device tree. Prior to the Phylink conversion this was also done but later on in the driver the MDIO bus was manually scanned to circumvent the fact that the PHY wasn't described. This patch fixes it in a proper way, by registering the MDIO bus based on if the PHY attached to a given interface is described in the device tree or not. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | of: mdio: export of_mdiobus_child_is_phyAntoine Tenart2019-12-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch exports of_mdiobus_child_is_phy, allowing to check if a child node is a network PHY. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2019-12-1910-40/+37
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf 2019-12-19 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 8 day(s) which contain a total of 21 files changed, 269 insertions(+), 108 deletions(-). The main changes are: 1) Fix lack of synchronization between xsk wakeup and destroying resources used by xsk wakeup, from Maxim Mikityanskiy. 2) Fix pruning with tail call patching, untrack programs in case of verifier error and fix a cgroup local storage tracking bug, from Daniel Borkmann. 3) Fix clearing skb->tstamp in bpf_redirect() when going from ingress to egress which otherwise cause issues e.g. on fq qdisc, from Lorenz Bauer. 4) Fix compile warning of unused proc_dointvec_minmax_bpf_restricted() when only cBPF is present, from Alexander Lobakin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | net/ixgbe: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy2019-12-192-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. ixgbe_down already calls synchronize_rcu after setting __IXGBE_DOWN. 2. After switching the XDP program, call synchronize_rcu to let ixgbe_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down. 4. Disabling UMEM sets __IXGBE_TX_DISABLED before closing hardware resources and resetting xsk_umem. Check that bit in ixgbe_xsk_wakeup to avoid using the XDP ring when it's already destroyed. synchronize_rcu is called from ixgbe_txrx_ring_disable. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-5-maximmi@mellanox.com
| | * | | net/i40e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy2019-12-193-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. i40e_down already calls synchronize_rcu. On i40e_down either __I40E_VSI_DOWN or __I40E_CONFIG_BUSY is set. Check the latter in i40e_xsk_wakeup (the former is already checked there). 2. After switching the XDP program, call synchronize_rcu to let i40e_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down (see i40e_prep_for_reset and i40e_pf_quiesce_all_vsi). 4. Disabling UMEM sets __I40E_CONFIG_BUSY, too. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-4-maximmi@mellanox.com
| | * | | net/mlx5e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy2019-12-195-33/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After disabling resources necessary for XSK (the XDP program, channels, XSK queues), use synchronize_rcu to wait until the XSK wakeup function finishes, before freeing the resources. Suspend XSK wakeups during switching channels. If the XDP program is being removed, synchronize_rcu before closing the old channels to allow XSK wakeup to complete. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-3-maximmi@mellanox.com
| * | | | net: stmmac: Always arm TX Timer at end of transmission startJose Abreu2019-12-181-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If TX Coalesce timer is enabled we should always arm it, otherwise we may hit the case where an interrupt is missed and the TX Queue will timeout. Arming the timer does not necessarly mean it will run the tx_clean() because this function is wrapped around NAPI launcher. Fixes: 9125cdd1be11 ("stmmac: add the initial tx coalesce schema") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net: stmmac: Enable 16KB buffer sizeJose Abreu2019-12-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | XGMAC supports maximum MTU that can go to 16KB. Lets add this check in the calculation of RX buffer size. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net: stmmac: 16KB buffer must be 16 byte alignedJose Abreu2019-12-181-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 16KB RX Buffer must also be 16 byte aligned. Fix it. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net: stmmac: RX buffer size must be 16 byte alignedJose Abreu2019-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to align the RX buffer size to at least 16 byte so that IP doesn't mis-behave. This is required by HW. Changes from v2: - Align UP and not DOWN (David) Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net: stmmac: xgmac: Clear previous RX buffer sizeJose Abreu2019-12-182-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When switching between buffer sizes we need to clear the previous value. Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 11:41:06 +0100