summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Bluetooth: btintel: Fix endianness issue for TLV version informationKiran K2020-12-071-7/+14
| | | | | | | | | | | do __le32_to_cpu to tlv data fields to make sure driver runs correctly when running on big endian system. Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btmtksdio: Add the missed release_firmware() in mtk_setup_firmware()Jing Xiangfeng2020-12-071-1/+1
| | | | | | | | | | mtk_setup_firmware() misses to call release_firmware() in an error path. Jump to free_fw to fix it. Fixes: 737cd06072a7 ("Bluetooth: btmtksdio: fix up firmware download sequence") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btusb: Add the missed release_firmware() in ↵Jing Xiangfeng2020-12-071-1/+1
| | | | | | | | | | | | btusb_mtk_setup_firmware() btusb_mtk_setup_firmware() misses to call release_firmware() in an error path. Jump to err_release_fw to fix it. Fixes: f645125711c8 ("Bluetooth: btusb: fix up firmware download sequence") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btusb: Support 0bda:c123 Realtek 8822CE deviceCadel Watson2020-12-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Lenovo Ideapad laptop models use the 0bda:c123 USB identifier for their Bluetooth device, so load the appropriate firmware for Realtek 8822CE. -Device(0bda:c123) from /sys/kernel/debug/usb/devices T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=c123 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Cadel Watson <cadel@cadelwatson.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btqca: Use NVM files based on SoC ID for WCN3991Venkata Lakshmi Narayana Gubba2020-12-073-25/+42
| | | | | | | | | | This change will allow to use different NVM file based on WCN3991 BT SoC ID.Need to use different NVM file based on fab location for WCN3991 BT SoC. Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_h5: Add OBDA0623 ACPI HIDHans de Goede2020-11-231-0/+1
| | | | | | | | | Add OBDA0623 ACPI HID to the acpi_device_id table. This HID is used for the RTL8723BS Bluetooth part on the Acer Switch 10E SW3-016. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1665610 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: revert: hci_h5: close serdev device and free hu in h5_closeHans de Goede2020-11-231-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There have been multiple revisions of the patch fix the h5->rx_skb leak. Accidentally the first revision (which is buggy) and v5 have both been merged: v1 commit 70f259a3f427 ("Bluetooth: hci_h5: close serdev device and free hu in h5_close"); v5 commit 855af2d74c87 ("Bluetooth: hci_h5: fix memory leak in h5_close") The correct v5 makes changes slightly higher up in the h5_close() function, which allowed both versions to get merged without conflict. The changes from v1 unconditionally frees the h5 data struct, this is wrong because in the serdev enumeration case the memory is allocated in h5_serdev_probe() like this: h5 = devm_kzalloc(dev, sizeof(*h5), GFP_KERNEL); So its lifetime is tied to the lifetime of the driver being bound to the serdev and it is automatically freed when the driver gets unbound. In the serdev case the same h5 struct is re-used over h5_close() and h5_open() calls and thus MUST not be free-ed in h5_close(). The serdev_device_close() added to h5_close() is incorrect in the same way, serdev_device_close() is called on driver unbound too and also MUST no be called from h5_close(). This reverts the changes made by merging v1 of the patch, so that just the changes of the correct v5 remain. Cc: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_qca: Wait for timeout during suspendVenkata Lakshmi Narayana Gubba2020-11-111-9/+39
| | | | | | | | | | | | | Currently qca_suspend() is relied on IBS mechanism. During FW download and memory dump collections, IBS will be disabled. In those cases, driver will allow suspend and still uses the serdev port, which results to errors. Now added a wait timeout if suspend is triggered during FW download and memory collections. Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btrtl: fix incorrect skb allocation failure checkColin Ian King2020-11-111-1/+1
| | | | | | | | | | | Currently the check for a failed bt_skb_alloc allocation is incorrectly checking using IS_ERR and this can lead to a null pointer dereference. Fix this by checking for a null pointer return using the !skb idiom. Addresses-Coverity: ("Dereference null return") Fixes: 1996d9cad6ad ("Bluetooth: btrtl: Ask 8821C to drop old firmware") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_ll: add a small delay for wl1271 enable bt_enXiaolei Wang2020-11-111-0/+1
| | | | | | | | | | When using the wl1271 Bluetooth function of am335x, it is found that the Bluetooth module cannot respond in time after Bluetooth is enabled, and a small delay is needed to work normally, so whether to add a small mdelay. Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Add support for 1358:c123 Realtek 8822CE deviceJulian Pidancet2020-11-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Huawei Matebook 13 2020 AMD laptops (and probably other Matebook models) are equiped with a RTL8822CE chip using the 1358:c123 USB identifiers. This patch adds firmware loading support for it. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1358 ProdID=c123 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Julian Pidancet <julian@pidancet.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_qca: resolve various warningsNigel Christian2020-11-111-4/+4
| | | | | | | | | | | | Replace symbolic permissions with octal values. Use usleep_range for small msec values due to the fact that msleep() less than 20ms may have unexpected behavior/sleep longer. - https://lkml.org/lkml/2016/8/2/1945 - Documentation/timers/timers-howto.rst Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_qca: Enhance retry logic in qca_setupBalakrishna Godavarthi2020-11-111-16/+18
| | | | | | | | | | | | Currently driver only retries to download FW if FW downloading is failed. Sometimes observed command timeout for version request command, if this happen on some platforms during boot time, then a reboot is needed to turn ON BT. Instead to avoid a reboot, now extended retry logic for version request command too. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: btrtl: Add support for RTL8852AMax Chou2020-11-102-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the support for RTL8852A BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=c852 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Add support for 13d3:3560 MediaTek MT7615E deviceChris Chiu2020-11-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ASUS X532EQ laptop contains AzureWave AW-CB434NF WiFi/BT combo module with an associated MT7615E BT chip using a USB ID of 13d3:3560. T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3560 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Chris Chiu <chiu@endlessos.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_h5: fix memory leak in h5_closeAnant Thazhemadam2020-11-091-0/+3
| | | | | | | | | | | | | | When h5_close() is called, h5 is directly freed when !hu->serdev. However, h5->rx_skb is not freed, which causes a memory leak. Freeing h5->rx_skb and setting it to NULL, fixes this memory leak. Fixes: ce945552fde4 ("Bluetooth: hci_h5: Add support for serdev enumerated devices") Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btrtl: Ask 8821C to drop old firmwareKai-Heng Feng2020-11-091-0/+46
| | | | | | | | | | | | | | | | Some platforms keep USB power even when they are powered off and in S5, this makes Realtek 8821C keep its firmware even after a cold boot, and make 8821C never load new firmware. So use vendor specific HCI command to ask 8821C drop its firmware after system shutdown. Newer firmware doesn't have this issue so we only use this trick for old 8821C firmware version. Suggested-by: Max Chou <max.chou@realtek.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btrtl: Refine the ic_id_table for clearer and more regularMax Chou2020-11-091-46/+19
| | | | | | | | | | | | Enhance the ic_id_table that it's able to maintain regularly. To judge which chip should be initialized by LMP subversion, HCI revision, HCI version and HCI bus which were given in the ic_id_table. Also, refine the incorrect LMP subversion of ROM for RTL8723D and RTL8723A. Suggested-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Add the more support IDs for Realtek RTL8822CEMax Chou2020-11-091-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the more IDs to usb_device_id table for Realtek RTL8822CE and also support the wideband speech capability for all RTL8822CE devices. -Device(04c5:161f) from /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04c5 ProdID=161f Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms -Device(0b05:18ef) from /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=18ef Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms -Device(13d3:3549) from /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3549 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms -Device(13d3:3553) from /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3553 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms -Device(13d3:3555) from /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3555 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms -Device(2ff8:3051) from /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2ff8 ProdID=3051 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_h5: close serdev device and free hu in h5_closeAnant Thazhemadam2020-11-091-2/+6
| | | | | | | | | | | | | When h5_close() gets called, the memory allocated for the hu gets freed only if hu->serdev doesn't exist. This leads to a memory leak. So when h5_close() is requested, close the serdev device instance and free the memory allocated to the hu entirely instead. Fixes: https://syzkaller.appspot.com/bug?extid=6ce141c55b2f7aafd1c4 Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btqca: Add valid le states quirkAbhishek Pandit-Subedi2020-11-091-6/+13
| | | | | | | | | WCN3991 supports connectable advertisements so we need to add the valid le states quirk so the 'central-peripheral' role is exposed in userspace. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* stmmac: intel: change all EHL/TGL to auto detect phy addrVoon Weifeng2020-11-081-5/+1
| | | | | | | | | | Set all EHL/TGL phy_addr to -1 so that the driver will automatically detect it at run-time by probing all the possible 32 addresses. Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> Link: https://lore.kernel.org/r/20201106094341.4241-1-vee.khee.wong@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: usb: fix spelling typo in cdc_ncm.cWang Qing2020-11-081-1/+1
| | | | | | | | Actually, withing should be within. Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1604649025-22559-1-git-send-email-wangqing@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: pass a value to gsi_irq_type_update()Alex Elder2020-11-081-18/+13
| | | | | | | | | | | | | | Now that all of the GSI interrupts are handled uniformly, change gsi_irq_type_update() so it takes a value. Have the function assign that value to the cached mask of enabled GSI IRQ types before writing it to hardware. Note that gsi_irq_teardown() will only be called after gsi_irq_disable(), so it's not necessary for the former to disable all IRQ types. Get rid of that. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: only enable GSI general IRQs when neededAlex Elder2020-11-082-5/+10
| | | | | | | | | | | | | | | Most GSI general errors are unrecoverable without a full reset. Despite that, we want to receive these errors so we can at least report what happened before whatever undefined behavior ensues. Explicitly disable all such interrupts in gsi_irq_setup(), then enable those we want in gsi_irq_enable(). List the interrupt types we are interested in (everything but breakpoint) explicitly rather than using GSI_CNTXT_GSI_IRQ_ALL, and remove that symbol's definition. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: explicitly disallow inter-EE interruptsAlex Elder2020-11-081-2/+2
| | | | | | | | | | | | | It is possible for other execution environments (EEs, like the modem) to request changes to local (AP) channel or event ring state. We do not support this feature. In gsi_irq_setup(), explicitly zero the mask that defines which channels are permitted to generate inter-EE channel state change interrupts. Do the same for the event ring mask. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: only enable GSI IEOB IRQs when neededAlex Elder2020-11-081-5/+11
| | | | | | | | | | | | | | | | | | | | | | A GSI channel must be started in order to use it to perform a transfer data (or command) transaction. And the only time we'll see an IEOB interrupt is if we send a transaction to a started channel. Therefore we do not need to have the IEOB interrupt type enabled until at least one channel has been started. And once the last started channel has been stopped, we can disable the IEOB interrupt type again. We already enable the IEOB interrupt for a particular channel only when it is started. Extend that by having the IEOB interrupt *type* be enabled only when at least one channel is in STARTED state. Disallow all channels from triggering the IEOB interrupt in gsi_irq_setup(). We only enable an channel's interrupt when needed, so there is no longer any need to zero the channel mask in gsi_irq_disable(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: only enable generic command completion IRQ when neededAlex Elder2020-11-082-9/+27
| | | | | | | | | | | | | | | | | | | | | | | | The completion of a generic EE GSI command is signaled by a global interrupt of type GP_INT1. The only other used type for a global interrupt is a hardware error report. First, disallow all global interrupt types in gsi_irq_setup(). We want to know about hardware errors, so re-enable the interrupt type in gsi_irq_enable(), to allow hardware errors to be reported. Disable that interrupt type again in gsi_irq_disable(). We only issue generic EE commands one at a time, and there's no reason to keep the completion interrupt enabled when no generic EE command is pending. We furthermore have no need to enable the GP_INT2 or GP_INT3 interrupt types (which aren't used). The change in gsi_irq_enable() makes GSI_CNTXT_GLOB_IRQ_ALL unused, so get rid of it. Have gsi_generic_command() enable the GP_INT1 interrupt type (in addition to the ERROR_INT type) only while a generic command is pending. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: only enable GSI event control IRQs when neededAlex Elder2020-11-081-7/+20
| | | | | | | | | | | | | | | | | | | | | | | A GSI event ring causes an event control interrupt to fire whenever its state changes (between NOT_ALLOCATED and ALLOCATED). No event ring should ever change state except when we request it to. Currently, we permit *all* events rings to generate event control interrupts--even those that are never used. And we enable event control interrupts essentially at all times, from setup to teardown. Instead, only enable the event control interrupt type for the duration of an event ring command, and when doing so, only allow the event ring being operated upon to cause the interrupt to fire. Disallow all event rings from issuing the event control interrupt in gsi_irq_setup(). Because an event ring's interrupt is only enabled when needed, there is no longer any need to zero the event channel mask in gsi_irq_disable(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: only enable GSI channel control IRQs when neededAlex Elder2020-11-081-7/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | A GSI channel causes a channel control interrupt to fire whenever its state changes (between NOT_ALLOCATED, ALLOCATED, STARTED, etc.). We do not support inter-EE channel commands (initiated by other EEs), so no channel should ever change state except when we request it to. Currently, we permit *all* channels to generate channel control interrupts--even those that are never used. And we enable channel control interrupts essentially at all times, from setup to teardown. Instead, disable all channel control interrupts initially in gsi_irq_setup(), and only enable the channel control interrupt type for the duration of a channel command. When doing so, only allow the channel being operated upon to cause the interrupt to fire. Because a channel's interrupt is now enabled only when needed (one channel at a time), there is no longer any need to zero the channel mask in gsi_irq_disable(). Add new gsi_irq_type_enable() and gsi_irq_type_disable() as helper functions to control whether a given GSI interrupt type is enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: cache last-saved GSI IRQ enabled typeAlex Elder2020-11-082-12/+24
| | | | | | | | | | | | Keep track of the set of GSI interrupt types that are currently enabled by recording the mask value to write (or last written) to the TYPE_IRQ_MSK register. Create a new helper function gsi_irq_type_update() to handle actually writing the register. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: disable all GSI interrupt types initiallyAlex Elder2020-11-081-10/+32
| | | | | | | | | | | | | | | Introduce gsi_irq_setup() and gsi_irq_teardown() to disable all GSI interrupts when first setting up GSI hardware, and to clean things up when we're done. Re-enable all GSI interrupt types in gsi_irq_enable(), but do so only after each of the type-specific interrupt masks has been configured. Similarly, disable all interrupt types in gsi_irq_disable()--first--before zeroing out the type-specific masks. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: define GSI interrupt types with an enumAlex Elder2020-11-082-18/+22
| | | | | | | | | | | | Define the GSI interrupt types with an enumerated type whose values are the bit positions representing each interrupt type. Include a short comment describing how each interrupt type is used. Build up the enabled interrupt mask explicitly in gsi_irq_enable(), and get rid of the definition of GSI_CNTXT_TYPE_IRQ_MSK_ALL. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: rename gsi->event_enable_bitmapAlex Elder2020-11-082-8/+8
| | | | | | | | | | | | Rename the "event_enable_bitmap" field of the GSI structure to be "ieob_enabled_bitmap". An upcoming patch will cache the last value stored for another interrupt mask and this is a more direct naming convention to follow. Add a few comments to explain the bitmap fields in the GSI structure. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: request GSI IRQ laterAlex Elder2020-11-081-26/+41
| | | | | | | | | | | | Introduce gsi_irq_init() and gsi_irq_exit(), to encapsulate looking up the GSI IRQ and registering its handler. Call gsi_irq_init() a little later in gsi_init(), and initialize the completion earlier. The IRQ handler accesses both the GSI virtual memory pointer and the completion, and this way these things will have been initialized before the gsi_irq() can ever be called. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: refer to IPA versions, not GSIAlex Elder2020-11-081-5/+5
| | | | | | | | | | | | | | | The GSI code is now exposed to IPA version numbers, and we handle version-specific behavior based on the IPA version. Modify some comments that talk about GSI versions so they reference IPA versions instead. Correct version number errors in a couple of these comments. The (comment) mapping between IPA and GSI versions in the definition of the ipa_version enumerated type remains. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: x25_asy: Delete the x25_asy driverXie He2020-11-074-898/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver transports LAPB (X.25 link layer) frames over TTY links. I can safely say that this driver has no actual user because it was not working at all until: commit 8fdcabeac398 ("drivers/net/wan/x25_asy: Fix to make it work") The code in its current state still has problems: 1. The uses of "struct x25_asy" in x25_asy_unesc (when receiving) and in x25_asy_write_wakeup (when sending) are not protected by locks against x25_asy_change_mtu's changing of the transmitting/receiving buffers. Also, all "netif_running" checks in this driver are not protected by locks against the ndo_stop function. 2. The driver stops all TTY read/write when the netif is down. I think this is not right because this may cause the last outgoing frame before the netif goes down to be incompletely transmitted, and the first incoming frame after the netif goes up to be incompletely received. And there may also be other problems. I was planning to fix these problems but after recent discussions about deleting other old networking code, I think we may just delete this driver, too. Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20201105073434.429307-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: macb: fix NULL dereference due to no pcs_config methodParshuram Thombare2020-11-071-2/+15
| | | | | | | | | | | | | This patch fixes NULL pointer dereference due to NULL pcs_config in pcs_ops. Fixes: e4e143e26ce8 ("net: macb: add support for high speed interface") Reported-by: Nicolas Ferre <Nicolas.Ferre@microchip.com> Link: https://lore.kernel.org/netdev/2db854c7-9ffb-328a-f346-f68982723d29@microchip.com/ Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/1604599113-2488-1-git-send-email-pthombar@cadence.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ptp: idt82p33: optimize _idt82p33_adjfineMin Li2020-11-071-9/+1
| | | | | | | | | Use div_s64 so that the neg_adj is not needed. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1604634729-24960-3-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ptp: idt82p33: use i2c_master_send for bus writeMin Li2020-11-072-11/+37
| | | | | | | | | | | Refactor idt82p33_xfer and use i2c_master_send for write operation. Because some I2C controllers are only working with single-burst write transaction. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1604634729-24960-2-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ptp: idt82p33: add adjphase supportMin Li2020-11-072-66/+153
| | | | | | | | | Add idt82p33_adjphase() to support PHC write phase mode. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1604634729-24960-1-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: macvlan: remove redundant initialization in macvlan_dev_netpoll_setupMenglong Dong2020-11-071-1/+1
| | | | | | | | | | | | The initialization for err with 0 seems useless, as it is soon updated with -ENOMEM. So, we can remove it. Changes since v1: -Keep -ENOMEM still. Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Link: https://lore.kernel.org/r/1604541244-3241-1-git-send-email-dong.menglong@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cxgb4: Fix the -Wmisleading-indentation warningKaixu Xia2020-11-071-1/+1
| | | | | | | | | | | | Fix the gcc warning: drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:2673:9: warning: this 'for' clause does not guard... [-Wmisleading-indentation] 2673 | for (i = 0; i < n; ++i) \ Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Link: https://lore.kernel.org/r/1604467444-23043-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: xilinx: axiethernet: Enable dynamic MDIO MDCClayton Rayment2020-11-072-23/+25
| | | | | | | | | | | | MDIO spec does not require an MDC at all times, only when MDIO transactions are occurring. This patch allows the xilinx_axienet driver to disable the MDC when not in use, and re-enable it when needed. It also simplifies the driver by removing MDC disable and enable in device reset sequence. Signed-off-by: Clayton Rayment <clayton.rayment@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: xilinx: axiethernet: Introduce helper functions for MDC enable/disableRadhey Shyam Pandey2020-11-072-5/+26
| | | | | | | | | Introduce helper functions to enable/disable MDIO interface clock. This change serves a preparatory patch for the coming feature to dynamically control the management bus clock. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2020-11-07325-23955/+2225
|\ | | | | | | Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * Merge branch 'mtd/fixes' of ↵Linus Torvalds2020-11-064-44/+44
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal. * 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: stm32_fmc2: fix broken ECC mtd: spi-nor: Fix address width on flash chips > 16MB mtd: spi-nor: Don't copy self-pointing struct around mtd: rawnand: ifc: Move the ECC engine initialization to the right place mtd: rawnand: mxc: Move the ECC engine initialization to the right place
| | * mtd: rawnand: stm32_fmc2: fix broken ECCChristophe Kerello2020-10-301-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits"), ECC are broken in FMC2 driver in case of nand-ecc-step-size and nand-ecc-strength are not set in the device tree. To avoid this issue, the default settings are now set in stm32_fmc2_nfc_attach_chip function. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1604064819-26861-1-git-send-email-christophe.kerello@st.com
| | * mtd: spi-nor: Fix address width on flash chips > 16MBBert Vermeulen2020-10-281-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a flash chip has more than 16MB capacity but its BFPT reports BFPT_DWORD1_ADDRESS_BYTES_3_OR_4, the spi-nor framework defaults to 3. The check in spi_nor_set_addr_width() doesn't catch it because addr_width did get set. This fixes that check. Fixes: f9acd7fa80be ("mtd: spi-nor: sfdp: default to addr_width of 3 for configurable widths") Signed-off-by: Bert Vermeulen <bert@biot.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20201006132346.12652-1-bert@biot.com
| | * mtd: spi-nor: Don't copy self-pointing struct aroundAlexander Sverdlin2020-10-281-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spi_nor_parse_sfdp() modifies the passed structure so that it points to itself (params.erase_map.regions to params.erase_map.uniform_region). This makes it impossible to copy the local struct anywhere else. Therefore only use memcpy() in backup-restore scenario. The bug may show up like below: BUG: unable to handle page fault for address: ffffc90000b377f8 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 3500 Comm: flashcp Tainted: G O 5.4.53-... #1 ... RIP: 0010:spi_nor_erase+0x8e/0x5c0 Code: 64 24 18 89 db 4d 8b b5 d0 04 00 00 4c 89 64 24 18 4c 89 64 24 20 eb 12 a8 10 0f 85 59 02 00 00 49 83 c6 10 0f 84 4f 02 00 00 <49> 8b 06 48 89 c2 48 83 e2 c0 48 89 d1 49 03 4e 08 48 39 cb 73 d8 RSP: 0018:ffffc9000217fc48 EFLAGS: 00010206 RAX: 0000000000740000 RBX: 0000000000000000 RCX: 0000000000740000 RDX: ffff8884550c9980 RSI: ffff88844f9c0bc0 RDI: ffff88844ede7bb8 RBP: 0000000000740000 R08: ffffffff815bfbe0 R09: ffff88844f9c0bc0 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc9000217fc60 R13: ffff88844ede7818 R14: ffffc90000b377f8 R15: 0000000000000000 FS: 00007f4699780500(0000) GS:ffff88846ff00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc90000b377f8 CR3: 00000004538ee000 CR4: 0000000000340fe0 Call Trace: part_erase+0x27/0x50 mtdchar_ioctl+0x831/0xba0 ? filemap_map_pages+0x186/0x3d0 ? do_filp_open+0xad/0x110 ? _copy_to_user+0x22/0x30 ? cp_new_stat+0x150/0x180 mtdchar_unlocked_ioctl+0x2a/0x40 do_vfs_ioctl+0xa0/0x630 ? __do_sys_newfstat+0x3c/0x60 ksys_ioctl+0x70/0x80 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x6a/0x200 ? prepare_exit_to_usermode+0x50/0xd0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f46996b6817 Cc: stable@vger.kernel.org Fixes: c46872170a54 ("mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter'") Co-developed-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Baurzhan Ismagulov <ibr@radix50.net> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201005084803.23460-1-alexander.sverdlin@nokia.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 07:56:58 +0100