summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ixgbe: Use private workqueue to avoid certain possible hangsMark Rustad2015-12-031-1/+13
| | | | | | | | | | Use a private workqueue to avoid hangs that were otherwise possible when performing stress tests, such as creating and destroying many VFS repeatedly. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add support for newer thermal alarmMark Rustad2015-12-032-3/+23
| | | | | | | | | | The newer copper PHY implementation used with newer X550EM_x devices uses a different thermal alarm type than the earlier one. Make changes to support both types. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Prevent KR PHY reset in ixgbe_init_phy_ops_x550emMark Rustad2015-12-031-13/+8
| | | | | | | | | | | | This patch removes KR PHY reset from ixgbe_init_phy_ops_x550em, since this function is meant to initialize function pointers for the detected PHY type. Internal PHY reset was moved to ixgbe_setup_internal_phy_t_x550em which will now detect which mode the internal PHY operates in and set it up as required. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* sfc: use ALIGN macro for aligning frame sizesJarod Wilson2015-12-031-1/+2
| | | | | | | | | | | Don't open-code it. CC: Solarflare linux maintainers <linux-net-drivers@solarflare.com> CC: Shradha Shah <sshah@solarflare.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate vlan_tci from struct hv_netvsc_packetKY Srinivasan2015-12-033-13/+12
| | | | | | | Eliminate vlan_tci from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate status from struct hv_netvsc_packetKY Srinivasan2015-12-034-22/+13
| | | | | | | Eliminate status from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate xmit_more from struct hv_netvsc_packetKY Srinivasan2015-12-034-9/+8
| | | | | | | Eliminate xmit_more from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate completion_func from struct hv_netvsc_packetKY Srinivasan2015-12-033-5/+0
| | | | | | | Eliminate completion_func from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate is_data_pkt from struct hv_netvsc_packetKY Srinivasan2015-12-034-9/+8
| | | | | | | Eliminate is_data_pkt from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate send_completion_tid from struct hv_netvsc_packetKY Srinivasan2015-12-034-33/+19
| | | | | | | Eliminate send_completion_tid from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate page_buf from struct hv_netvsc_packetKY Srinivasan2015-12-034-31/+35
| | | | | | | | Eliminate page_buf from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: remove locking in netvsc_send()Vitaly Kuznetsov2015-12-032-9/+0
| | | | | | | | | Packet scheduler guarantees there won't be multiple senders for the same queue and as we use q_idx for multi_send_data the spinlock is redundant. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: move subchannel existence check to netvsc_select_queue()Vitaly Kuznetsov2015-12-033-18/+5
| | | | | | Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Don't ask for additional head room in the skbKY Srinivasan2015-12-032-19/+14
| | | | | | | | | | | | The rndis header is 116 bytes big and can be placed in the default head room that will be available in the skb. Since the netvsc packet is less than 48 bytes, we can use the skb control buffer for the netvsc packet. With these changes we don't need to ask for additional head room. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate send_completion_ctx from struct hv_netvsc_packetKY Srinivasan2015-12-033-4/+1
| | | | | | | | Eliminate send_completion_ctx from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate send_completion from struct hv_netvsc_packetKY Srinivasan2015-12-034-7/+6
| | | | | | | | Eliminate send_completion from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminatte the data field from struct hv_netvsc_packetKY Srinivasan2015-12-034-10/+14
| | | | | | | | Eliminatte the data field from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate rndis_msg pointer from hv_netvsc_packet structureKY Srinivasan2015-12-034-14/+13
| | | | | | | | Eliminate rndis_msg pointer from hv_netvsc_packet structure. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Eliminate the channel field in hv_netvsc_packet structureKY Srinivasan2015-12-034-21/+35
| | | | | | | | Eliminate the channel field in hv_netvsc_packet structure. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Rearrange the hv_negtvsc_packet to be space efficientKY Srinivasan2015-12-031-8/+10
| | | | | | | | | Rearrange the elements of struct hv_negtvsc_packet for optimal layout - eliminate unnecessary padding. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: Resize some of the variables in hv_netvsc_packetKY Srinivasan2015-12-031-7/+7
| | | | | | | | | As part of reducing the size of the hv_netvsc_packet, resize some of the variables based on their usage. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: remove unused argumentJesse Brandeburg2015-12-024-12/+18
| | | | | | | | | | | With the final edition of the patches to remove sleeps from the driver's entry points, the grab_rtnl argument is no longer needed, so partially revert the commit that added it. Change-ID: Ib9778476242586cc9e58b670f5f48d415cb59003 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: fix: do not sleep in netdev_opsJesse Brandeburg2015-12-021-24/+20
| | | | | | | | | | | | | | The driver was being called by VLAN, bonding, teaming operations that expected to be able to hold locks like rcu_read_lock(). This causes the driver to be held to the requirement to not sleep, and was found by the kernel debug options for checking sleep inside critical section, and the locking validator. Change-ID: Ibc68c835f5ffa8ffe0638ffe910a66fc5649a7f7 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Bump i40e version to 1.4.4 and i40evf to 1.4.1Catherine Sullivan2015-12-022-2/+2
| | | | | | | | | Bump. Change-ID: I00ebbb2e5e5572f947502b8f6db4d94f666d6b14 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: allocate ring structs dynamicallyMitch Williams2015-12-025-41/+40
| | | | | | | | | | | | | Instead of awkwardly keeping a fixed array of pointers in the adapter struct and then allocating ring structs individually, just keep a single pointer and allocate a single blob for the arrays. This simplifies code, shrinks the adapter structure, and future-proofs the driver by not limiting the number of rings we can handle. Change-ID: I31334ff911a6474954232cfe4bc98ccca3c769ff Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: allocate queue vectors dynamicallyMitch Williams2015-12-024-26/+21
| | | | | | | | | | | | | Change the queue_vector array from a statically-sized member of the adapter structure to a dynamically-allocated and -sized array. This reduces the size of the adapter structure, and allows us to support any number of queue vectors in the future without changing the code. Change-ID: I08dc622cb2f2ad01e832e51c1ad9b86524730693 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: quoth the VF driver, NevermoreMitch Williams2015-12-021-0/+8
| | | | | | | | | | | | | | | If, upon a midnight dreary, the PF returns ERR_PARAM when the VF is requesting resources, that's fatal. Either the firmware or NVM is badly, badly misconfigured, or this VF has been disabled due to a previous VF driver sending a bunch of bogus messages. Either way, there is no recovery from this. Don't ponder weak and weary, just quit. Change-ID: I09d9f16cc4ee7fec3b57646a289d33838c1c5bf5 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: make error message more usefulMitch Williams2015-12-021-2/+2
| | | | | | | | | | If we get an invalid message from a VF, we should tell the user which VF is being naughty, rather than making them guess. Change-ID: I9252cef7baea3d8584043ed6ff12619a94e2f99c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: fix confusing messageHelin Zhang2015-12-021-1/+2
| | | | | | | | | | This patch fixes the confusing kernel message of enabled RSS size, by reporting it together with the hardware maximum RSS size. Change-ID: I64864dbfbc13beccc180a7871680def1f3d5a339 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Update error messagingCarolyn Wyborny2015-12-021-6/+10
| | | | | | | | | | | | | | This patch fixes an issue where adminq init failures always provided a message that NVM was newer than expected. This is not always the case for init_adminq failures. Without this patch, if adminq init fails for any reason, newer NVM message would be given. This problem is fixed by adding a check for that specific error condition and a different hopefully helpful message otherwise. Change-ID: Iaeaebee4e398989eae40bb70f943ab66a3a521a5 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: add new fields to store user configuration of RSSHelin Zhang2015-12-023-16/+54
| | | | | | | | | | This patch adds new fields to i40e_vsi to store user configured RSS config data and code to use it. Change-ID: Ic5d3db8d9df52182b560248f8cdca9c5c7546879 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: create a generic get RSS functionHelin Zhang2015-12-023-13/+121
| | | | | | | | | | | There are two ways to get RSS, this patch implements two functions with the same input parameters, and creates a more generic function for getting RSS configuration. Change-ID: I12d3b712c21455d47dd0a5aae58fc9b7c680db59 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: create a generic config RSS functionHelin Zhang2015-12-023-70/+130
| | | | | | | | | | | There are two ways to configure RSS, this patch adjusts those two functions with the same input parameters, and creates a more generic function for configuring RSS. Change-ID: Iace73bdeba4831909979bef221011060ab327f71 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: rename VF adapter specific RSS functionHelin Zhang2015-12-021-5/+5
| | | | | | | | | | This patch renames old VF adapter specific RSS function to clarify its scope. Change-ID: Ie5253083a44c677ebb7709a8a3a18402ad2dc6a6 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: prefetch skb data on transmitJesse Brandeburg2015-12-022-0/+6
| | | | | | | | | | | | Issue a prefetch for data early in the transmit path. This should not be generally needed for Tx traffic, but it helps immensely for pktgen workloads and should help for forwarding workloads as well. Change-ID: Iefee870c20599e0c4240e1d8637e4f16b625f83a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Fix RS bit update in Tx path and disable force WB workaroundAnjali Singhai Jain2015-12-022-43/+77
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the issue of forcing WB too often causing us to not benefit from NAPI. Without this patch we were forcing WB/arming interrupt too often taking away the benefits of NAPI and causing a performance impact. With this patch we disable force WB in the clean routine for X710 and XL710 adapters. X722 adapters do not enable interrupt to force a WB and benefit from WB_ON_ITR and hence force WB is left enabled for those adapters. For XL710 and X710 adapters if we have less than 4 packets pending a software Interrupt triggered from service task will force a WB. This patch also changes the conditions for setting RS bit as described in code comments. This optimizes when the HW does a tail bump amd when it does a WB. It also optimizes when we do a wmb. Change-ID: Id831e1ae7d3e2ec3f52cd0917b41ce1d22d75d9d Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: rename rss_size to alloc_rss_size in i40e_pfHelin Zhang2015-12-022-17/+22
| | | | | | | | | | | This patch renames rss_size to alloc_rss_size in i40e_pf, which is clearer and avoids confusion. It also adds comments to the other related structure members to help clarify usage. Change-ID: Ia90090609d006ab589cb639975bb8a0af795d16f Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: add new fields to store user configurationHelin Zhang2015-12-023-17/+68
| | | | | | | | | | This patch adds new fields to i40e_vsi to store user configured RSS config data and code to use it. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Change-ID: I73886469dca9e9f6b16d842182a87f3f4009f95d Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* isdn: remove spellcaster driverArnd Bergmann2015-12-0118-3136/+0
| | | | | | | | | | | | | | | | | | | The 'sc' ISDN driver relies on using readl() to access ISA I/O memory. This has been deprecated and produced warnings since linux-2.3.23, disabled by default since 2.4.10 and finally removed in 2.6.5. I found this because the compiling the driver for ARM produces a warning: In file included from ../drivers/isdn/sc/includes.h:8:0, from ../drivers/isdn/sc/init.c:13: ../arch/arm/include/asm/io.h:115:21: note: expected 'const volatile void *' but argument is of type 'long unsigned int' It is pretty clear that this driver has not been used for a long time and there is no point fixing it now, so let's remove it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* stmmac: support Reg_9 to get HW level informationGiuseppe CAVALLARO2015-12-014-0/+173
| | | | | | | | | For GMAC newer than 3.40a there is a new register (Reg_9) that provides the status of all modules of the transmit and receive paths and FIFO status. These can be exposed via ethtool. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qede: Add support for {get, set}_pauseparamSudarsana Kalluru2015-12-011-0/+60
| | | | | | Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qede: Add support for nway_resetSudarsana Kalluru2015-12-011-0/+25
| | | | | | Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qede: Add support for set_phys_idSudarsana Kalluru2015-12-011-0/+29
| | | | | | Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Add support for changing LED stateSudarsana Kalluru2015-12-014-0/+64
| | | | | | | | | | | Physical LEDs are being controlled by the management FW. This adds the qed functionality required to request management FW to change the LED configuration, as well as the necessary APIs for this functionality to later be used by the protocol drivers. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qede: Add support for {get, set}_ringparamSudarsana Kalluru2015-12-012-2/+46
| | | | | | Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qede: Add support for {get, set}_channelsSudarsana Kalluru2015-12-013-2/+59
| | | | | | Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Add PCI ID for Solarflare 8000 series 10/40G NICBert Kenward2015-12-011-0/+6
| | | | | | | Also add support for 7000 series 40G NIC VF. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: make TSO version a per-queue parameterBert Kenward2015-12-013-9/+14
| | | | | | | | | The Solarflare 8000 series NIC will use a new TSO scheme. The current driver refuses to load if the current TSO scheme is not found. Remove that check and instead make the TSO version a per-queue parameter. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hv_netvsc: rework link status change handlingVitaly Kuznetsov2015-12-012-48/+108
| | | | | | | | | | | | | | | | | | | | | | | There are several issues in hv_netvsc driver with regards to link status change handling: - RNDIS_STATUS_NETWORK_CHANGE results in calling userspace helper doing '/etc/init.d/network restart' and this is inappropriate and broken for many reasons. - link_watch infrastructure only sends one notification per second and in case of e.g. paired disconnect/connect events we get only one notification with last status. This makes it impossible to handle such situations in userspace. Redo link status changes handling in the following way: - Create a list of reconfig events in network device context. - On a reconfig event add it to the list of events and schedule netvsc_link_change(). - In netvsc_link_change() ensure 2-second delay between link status changes. - Handle RNDIS_STATUS_NETWORK_CHANGE as a paired disconnect/connect event. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: core: Implement fan control using hwmonJiri Pirko2015-11-301-1/+120
| | | | | | | | ASIC provides access to fans. Implement their exposure to userspace using hwmon. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 02:53:41 +0100