summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* yam: fix possible memory leak in yam_init_driverWang Hai2020-06-051-0/+1
| | | | | | | | | | If register_netdev(dev) fails, free_netdev(dev) needs to be called, otherwise a memory leak will occur. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* lan743x: Use correct MAC_CR configuration for 1 GBit speedRoelof Berg2020-06-051-1/+1
| | | | | | | | | | | | | | | Corrected the MAC_CR configuration bits for 1 GBit operation. The data sheet allows MAC_CR(2:1) to be 10 and also 11 for 1 GBit/s speed, but only 10 works correctly. Devices tested: Microchip Lan7431, fixed-phy mode Microchip Lan7430, normal phy mode Fixes: 6f197fb63850 ("lan743x: Added fixed link and RGMII support") Signed-off-by: Roelof Berg <rberg@berg-solutions.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: freescale: remove unneeded include for ucc_gethValentin Longchamp2020-06-051-1/+0
| | | | | | | net/sch_generic.h does not need to be included, remove it. Signed-off-by: Valentin Longchamp <valentin@longchamp.me> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: fix failing WoLHeiner Kallweit2020-06-051-6/+7
| | | | | | | | | | | | | | | | Th referenced change added an extra hw reset to rtl8169_net_suspend() what makes WoL fail on few chip versions. Therefore skip the extra reset if we're going down and WoL is enabled. In rtl_shutdown() rtl8169_hw_reset() is called by rtl8169_net_suspend() already if needed, therefore avoid issues issue by removing the extra call. The fix was tested on a system with RTL8168g. Meanwhile rtl8169_hw_reset() does more than a hw reset and should be renamed. But that's net-next material. Fixes: 8ac8e8c64b53 ("r8169: make rtl8169_down central chip quiesce function") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: dwmac: Fix an error code in imx_dwmac_probe()Dan Carpenter2020-06-051-1/+1
| | | | | | | | | | The code is return PTR_ERR(NULL) which is zero or success. We should return -ENOMEM instead. Fixes: 94abdad6974a5 ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mdiobus: Disable preemption upon u64_stats updateAhmed S. Darwish2020-06-051-0/+2
| | | | | | | | | | | | | | | | The u64_stats mechanism uses sequence counters to protect against 64-bit values tearing on 32-bit architectures. Updating u64_stats is thus a sequence counter write side critical section where preemption must be disabled. For mdiobus_stats_acct(), disable preemption upon the u64_stats update. It is called from process context through mdiobus_read() and mdiobus_write(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: fixed_phy: Remove unused seqcountAhmed S. Darwish2020-06-051-17/+11
| | | | | | | | | | | | | | | | Commit bf7afb29d545 ("phy: improve safety of fixed-phy MII register reading") protected the fixed PHY status with a sequence counter. Two years later, commit d2b977939b18 ("net: phy: fixed-phy: remove fixed_phy_update_state()") removed the sequence counter's write side critical section -- neutralizing its read side retry loop. Remove the unused seqcount. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: qca8k: Fix "Unexpected gfp" kernel exceptionMichal Vokáč2020-06-051-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper") replaced the dsa_switch_alloc helper by devm_kzalloc in all DSA drivers. Unfortunately it introduced a typo in qca8k.c driver and wrong argument is passed to the devm_kzalloc function. This fix mitigates the following kernel exception: Unexpected gfp: 0x6 (__GFP_HIGHMEM|GFP_DMA32). Fixing up to gfp: 0x101 (GFP_DMA|__GFP_ZERO). Fix your code! CPU: 1 PID: 44 Comm: kworker/1:1 Not tainted 5.5.9-yocto-ua #1 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events deferred_probe_work_func [<c0014924>] (unwind_backtrace) from [<c00123bc>] (show_stack+0x10/0x14) [<c00123bc>] (show_stack) from [<c04c8fb4>] (dump_stack+0x90/0xa4) [<c04c8fb4>] (dump_stack) from [<c00e1b10>] (new_slab+0x20c/0x214) [<c00e1b10>] (new_slab) from [<c00e1cd0>] (___slab_alloc.constprop.0+0x1b8/0x540) [<c00e1cd0>] (___slab_alloc.constprop.0) from [<c00e2074>] (__slab_alloc.constprop.0+0x1c/0x24) [<c00e2074>] (__slab_alloc.constprop.0) from [<c00e4538>] (__kmalloc_track_caller+0x1b0/0x298) [<c00e4538>] (__kmalloc_track_caller) from [<c02cccac>] (devm_kmalloc+0x24/0x70) [<c02cccac>] (devm_kmalloc) from [<c030d888>] (qca8k_sw_probe+0x94/0x1ac) [<c030d888>] (qca8k_sw_probe) from [<c0304788>] (mdio_probe+0x30/0x54) [<c0304788>] (mdio_probe) from [<c02c93bc>] (really_probe+0x1e0/0x348) [<c02c93bc>] (really_probe) from [<c02c9884>] (driver_probe_device+0x60/0x16c) [<c02c9884>] (driver_probe_device) from [<c02c7fb0>] (bus_for_each_drv+0x70/0x94) [<c02c7fb0>] (bus_for_each_drv) from [<c02c9708>] (__device_attach+0xb4/0x11c) [<c02c9708>] (__device_attach) from [<c02c8148>] (bus_probe_device+0x84/0x8c) [<c02c8148>] (bus_probe_device) from [<c02c8cec>] (deferred_probe_work_func+0x64/0x90) [<c02c8cec>] (deferred_probe_work_func) from [<c0033c14>] (process_one_work+0x1d4/0x41c) [<c0033c14>] (process_one_work) from [<c00340a4>] (worker_thread+0x248/0x528) [<c00340a4>] (worker_thread) from [<c0039148>] (kthread+0x124/0x150) [<c0039148>] (kthread) from [<c00090d8>] (ret_from_fork+0x14/0x3c) Exception stack(0xee1b5fb0 to 0xee1b5ff8) 5fa0: 00000000 00000000 00000000 00000000 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 qca8k 2188000.ethernet-1:0a: Using legacy PHYLIB callbacks. Please migrate to PHYLINK! qca8k 2188000.ethernet-1:0a eth2 (uninitialized): PHY [2188000.ethernet-1:01] driver [Generic PHY] qca8k 2188000.ethernet-1:0a eth1 (uninitialized): PHY [2188000.ethernet-1:02] driver [Generic PHY] Fixes: 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* geneve: change from tx_error to tx_dropped on missing metadataJiri Benc2020-06-051-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | If the geneve interface is in collect_md (external) mode, it can't send any packets submitted directly to its net interface, as such packets won't have metadata attached. This is expected. However, the kernel itself sends some packets to the interface, most notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong, as tunnel metadata can be specified in routing table (although technically, that has never worked for IPv6, but hopefully will be fixed eventually) and then the interface must correctly participate in IPv6 housekeeping. The problem is that any such attempt increases the tx_error counter. Just bringing up a geneve interface with IPv6 enabled is enough to see a number of tx_errors. That causes confusion among users, prompting them to find a network error where there is none. Change the counter used to tx_dropped. That better conveys the meaning (there's nothing wrong going on, just some packets are getting dropped) and hopefully will make admins panic less. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ena: xdp: update napi budget for DROP and ABORTEDSameeh Jubran2020-06-051-4/+4
| | | | | | | | | | | | | | | | | This patch fixes two issues with XDP: 1. If the XDP verdict is XDP_ABORTED we break the loop, which results in us handling one buffer per napi cycle instead of the total budget (usually 64). To overcome this simply change the xdp_verdict check to != XDP_PASS. When the verdict is XDP_PASS, the skb is not expected to be NULL. 2. Update the residual budget for XDP_DROP and XDP_ABORTED, since packets are handled in these cases. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ena: xdp: XDP_TX: fix memory leakSameeh Jubran2020-06-051-1/+1
| | | | | | | | | | | | | When sending very high packet rate, the XDP tx queues can get full and start dropping packets. In this case we don't free the pages which results in ena driver draining the system memory. Fix: Simply free the pages when necessary. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* crypto/chcr: error seen if CONFIG_CHELSIO_TLS_DEVICE isn't setRohit Maheshwari2020-06-051-1/+1
| | | | | | | | | cxgb4_uld_in_use() is used only by cxgb4_ktls_det_feature() which is under CONFIG_CHELSIO_TLS_DEVICE macro. Fixes: a3ac249a1ab5 ("cxgb4/chcr: Enable ktls settings at run time") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds2020-06-041099-22196/+94503
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
| * net_failover: fixed rollback in net_failover_open()Vasily Averin2020-06-031-1/+2
| | | | | | | | | | | | | | | | | | | | found by smatch: drivers/net/net_failover.c:65 net_failover_open() error: we previously assumed 'primary_dev' could be null (see line 43) Fixes: cfc80d9a1163 ("net: Introduce net_failover driver") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * vmxnet3: allow rx flow hash ops only when rss is enabledRonak Doshi2020-06-031-0/+12
| | | | | | | | | | | | | | | | | | | | It makes sense to allow changes to get/set rx flow hash callback only when rss is enabled. This patch restricts get_rss_hash_opts and set_rss_hash_opts methods to allow querying and configuring different Rx flow hash configurations only when rss is enabled Signed-off-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * hinic: add set_channels ethtool_ops supportLuo bin2020-06-032-9/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | add support to change TX/RX queue number with "ethtool -L combined". V5 -> V6: remove check for carrier in hinic_xmit_frame V4 -> V5: change time zone in patch header V3 -> V4: update date in patch header V2 -> V3: remove check for zero channels->combined_count V1 -> V2: update commit message("ethtool -L" to "ethtool -L combined") V0 -> V1: remove check for channels->tx_count/rx_count/other_count Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2020-06-0213-23/+19
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-06-01 The following pull-request contains BPF updates for your *net-next* tree. We've added 55 non-merge commits during the last 1 day(s) which contain a total of 91 files changed, 4986 insertions(+), 463 deletions(-). The main changes are: 1) Add rx_queue_mapping to bpf_sock from Amritha. 2) Add BPF ring buffer, from Andrii. 3) Attach and run programs through devmap, from David. 4) Allow SO_BINDTODEVICE opt in bpf_setsockopt, from Ferenc. 5) link based flow_dissector, from Jakub. 6) Use tracing helpers for lsm programs, from Jiri. 7) Several sk_msg fixes and extensions, from John. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * xdp: Rename convert_to_xdp_frame in xdp_convert_buff_to_frameLorenzo Bianconi2020-06-0213-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to use standard 'xdp' prefix, rename convert_to_xdp_frame utility routine in xdp_convert_buff_to_frame and replace all the occurrences Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/6344f739be0d1a08ab2b9607584c4d5478c8c083.1590698295.git.lorenzo@kernel.org
| | * xdp: Introduce xdp_convert_frame_to_buff utility routineLorenzo Bianconi2020-06-021-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce xdp_convert_frame_to_buff utility routine to initialize xdp_buff fields from xdp_frames ones. Rely on xdp_convert_frame_to_buff in veth xdp code. Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/87acf133073c4b2d4cbb8097e8c2480c0a0fac32.1590698295.git.lorenzo@kernel.org
| * | sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()Jules Irenge2020-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sparse reports a warning at efx_ef10_try_update_nic_stats_vf() warning: context imbalance in efx_ef10_try_update_nic_stats_vf() - unexpected unlock The root cause is the missing annotation at efx_ef10_try_update_nic_stats_vf() Add the missing _must_hold(&efx->stats_lock) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | crypto/chtls: IPv6 support for inline TLSVinay Kumar Yadav2020-06-023-43/+167
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extends support to IPv6 for Inline TLS server. Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> v1->v2: - cc'd tcp folks. v2->v3: - changed EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL() Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Crypto/chcr: Fixes a coccinile check errorAyush Sawal2020-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes an error observed after running coccinile check. drivers/crypto/chelsio/chcr_algo.c:1462:5-8: Unneeded variable: "err". Return "0" on line 1480 This line is missed in the commit 567be3a5d227 ("crypto: chelsio - Use multiple txq/rxq per tfm to process the requests"). Fixes: 567be3a5d227 ("crypto: chelsio - Use multiple txq/rxq per tfm to process the requests"). V1->V2 -Modified subject. Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Crypto/chcr: Fixes compilations warningsAyush Sawal2020-06-022-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the compilation warnings displayed by sparse tool for chcr driver. V1->V2 Avoid type casting by using get_unaligned_be32() and put_unaligned_be16/32() functions. The key which comes from stack is an u8 byte stream so we store it in an unsigned char array(ablkctx->key). The function get_aes_decrypt_key() is a used to calculate the reverse round key for decryption, for this operation the key has to be divided into 4 bytes, so to extract 4 bytes from an u8 byte stream and store it in an u32 variable, get_aligned_be32() is used. Similarly for copying back the key from u32 variable to the original u8 key stream, put_aligned_be32() is used. Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | crypto/chcr: IPV6 code needs to be in CONFIG_IPV6Rohit Maheshwari2020-06-021-15/+33
| | | | | | | | | | | | | | | | | | | | | | | | Error messages seen while building kernel with CONFIG_IPV6 disabled. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cxgb4/chcr: Enable ktls settings at run timeRohit Maheshwari2020-06-0210-85/+195
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current design enables ktls setting from start, which is not efficient. Now the feature will be enabled when user demands TLS offload on any interface. v1->v2: - taking ULD module refcount till any single connection exists. - taking rtnl_lock() before clearing tls_devops. v2->v3: - cxgb4 is now registering to tlsdev_ops. - module refcount inc/dec in chcr. - refcount is only for connections. - removed new code from cxgb_set_feature(). v3->v4: - fixed warning message. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: sja1105: suppress -Wmissing-prototypes in sja1105_vl.cVladimir Oltean2020-06-012-1/+3
| | | | | | | | | | | | | | | | | | | | Newer C compilers are complaining about the fact that there are no function prototypes in sja1105_vl.c for the non-static functions. Give them what they want. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch '100GbE' of ↵David S. Miller2020-06-0116-156/+142
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-05-31 This series contains updates to the ice driver only. Brett modifies the driver to allow users to clear a VF's administratively set MAC address on the PF. Fixes the driver to recognize an existing VLAN tag when DMAC/SMAC is enabled in a packet. Fixes an issue, so that VF's are reset after any VF port VLAN modifications are made on the PF. Made sure the register QRXFLXP_CNTXT is cleared before writing a new value to ensure the previous value is not passed forward. Updates the PF to allow the VF to request a reset as soon as it has been initialized. Fixes an issue to ensure when a VSI is created, it uses the current coalesce value, not the default value. Paul allows untrusted VF's to add 16 filters. Dan increases the timeout needed after a PFR to allow ample time for package download. Chinh adjust the define value for the number of PHY speeds we currently support. Changes the driver to ignore EMODE error when configuring the PHY. Jesse fixes an issue which was preventing a user from configuring the interface before bringing it up. Henry fixes the logic for adding back perfect flows after flow director filter does a deletion. Bruce fixes line wrappings to make it more consistent. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * ice: Ignore EMODE when setting PHY configChinh T Cao2020-05-313-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When setting the PHY cfg (CQ cmd 0x0601), if the firmware responds with an EMODE error, software will ignore the error as it simply means that manageability (ex: BMC) is in control of the link and that the new setting may not be applied. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: fix aRFS after flow director deleteHenry Tieman2020-05-311-1/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The logic was missing for adding back perfect flows after flow director filter delete. The code now adds perfect flows into the HW tables after filter delete. Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: Use coalesce values from q_vector 0 when increasing q_vectorsBrett Creeley2020-05-311-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when a VSI is built (i.e. reset, set channels, etc.) the coalesce settings will be preserved in most cases. However, when the number of q_vectors are increased the settings for the new q_vectors will be set to the driver defaults of AIM on, Rx/Tx ITR 50, and INTRL 0. This is causing issues with how the ethtool layer gets the current coalesce settings since it only uses q_vector 0. So, assume that the user set the coalesce settings globally (i.e. ethtool -C eth0) and use q_vector 0's settings for all of the new q_vectors. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: fix PCI device serial number to be lowercase valuesPaul M Stillwell Jr2020-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit ceb2f00707f9 ("ice: Use pci_get_dsn()") changed the code to use a new function to get the Device Serial Number. It also changed the case of the filename for loading a package on a specific NIC from lowercase to uppercase. Change the filename back to lowercase since that is what we specified. Fixes: ceb2f00707f9 ("ice: Use pci_get_dsn()") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: fix function signature style formatBruce Allan2020-05-313-16/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Where possible, cuddle multiple lines of function signatures to be consistent throughout the code. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: Allow VF to request reset as soon as it's initializedBrett Creeley2020-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A VF driver has the ability to request reset via VIRTCHNL_OP_RESET_VF. This is a required step in VF driver load. Currently, the PF is only allowing a VF to request reset using this method after the VF has already communicated resources via VIRTCHNL_OP_GET_VF_RESOURCES. However, this is incorrect because the VF can request reset before requesting resources. Fix this by allowing the VF to request a reset once it has been initialized. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: Fix inability to set channels when downJesse Brandeburg2020-05-311-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the driver prevents a user from doing modprobe ice ethtool -L eth0 combined 5 ip link set eth0 up The ethtool command fails, because the driver is checking to see if the interface is down before allowing the get_channels to proceed (even for a set_channels). Remove this check and allow the user to configure the interface before bringing it up, which is a much better usability case. Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: Always clear QRXFLXP_CNTXT before writing new valueBrett Creeley2020-05-313-22/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Always clear the previous value in QRXFLXP_CNTXT before writing a new value. This will make it so re-used queues will not accidentally take the previously configured settings. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: Reset VF for all port VLAN changes from hostBrett Creeley2020-05-311-37/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the PF is modifying the VF's port VLAN on the fly when configured via iproute. This is okay for most cases, but if the VF already has guest VLANs configured the PF has to remove all of those filters so only VLAN tagged traffic that matches the port VLAN will pass. Instead of adding functionality to track which guest VLANs have been added, just reset the VF each time port VLAN parameters are modified. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: Update ICE_PHY_TYPE_HIGH_MAX_INDEX valueChinh T Cao2020-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | As currently, we are supporting only 5 PHY_SPEEDs for phy_type_high. Thus, we should adjust the value of ICE_PHY_TYPE_HIGH_MAX_INDEX to 5. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: Increase timeout after PFRDan Nowlin2020-05-311-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To allow for resets during package download, increase the timeout period after performing a PFR. The time waited is the global config lock timeout plus the normal PFSWR timeout. Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: Fix transmit for all software offloaded VLANsBrett Creeley2020-05-313-54/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the driver does not recognize when there is an 802.1AD VLAN tag right after the dmac/smac (outermost VLAN tag). If any DCB map is applied and/or DCB is enabled this is causing the hardware to insert a VLAN 0 tag after the 802.1AD VLAN tag that is already in the packet. Fix this by preventing VLAN tag 0 from being added when any VLAN is already present after dmac/smac (software offloaded) or skb (hardware offloaded). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: support adding 16 unicast/multicast filter on untrusted VFPaul Greenwalt2020-05-311-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow untrusted VF to add 16 unicast/multicast filters. VF uses 1 filter for the default/perm_addr/LAA MAC, 1 for broadcast, and 16 additional unicast/multicast filters. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * ice: allow host to clear administratively set VF MACBrett Creeley2020-05-311-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently a user is not allowed to clear a VF's administratively set MAC on the PF. Fix this by allowing an all zero MAC address via "ip link set ${pf_eth} vf ${vf_id} mac 00:00:00:00:00:00". An example use case for this would be issuing a "virsh shutdown" command on a VM. The call to iproute mentioned above is part of this flow. Without this change the driver incorrectly rejects clearing the VF's administratively set MAC and prints unhelpful log messages. Also, improve the comments surrounding this change. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | vxlan: fix dereference of nexthop group in nexthop update pathRoopa Prabhu2020-06-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix dereference of nexthop group in fdb nexthop group update validation path. Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") Reported-by: Ido Schimmel <idosch@idosch.org> Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | dpaa2-eth: Keep congestion group taildrop enabled when PFC onIoana Ciornei2020-06-013-10/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Leave congestion group taildrop enabled for all traffic classes when PFC is enabled. Notification threshold is low enough such that it will be hit first and this also ensures that FQs on traffic classes which are not PFC enabled won't drain the buffer pool. FQ taildrop threshold is kept disabled as long as any form of flow control is on. Since FQ taildrop works with bytes, not number of frames, we can't guarantee it will not interfere with the congestion notification mechanism for all frame sizes. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | dpaa2-eth: Add PFC support through DCB opsIoana Ciornei2020-06-018-0/+316
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support in dpaa2-eth for PFC (Priority Flow Control) through the DCB ops. Instruct the hardware to respond to received PFC frames. Current firmware doesn't allow us to selectively enable PFC on the Rx side for some priorities only, so we will react to all incoming PFC frames (and stop transmitting on the traffic classes specified in the frame). Also, configure the hardware to generate PFC frames based on Rx congestion notifications. When a certain number of frames accumulate in the ingress queues corresponding to a traffic class, priority flow control frames are generated for that TC. The number of PFC traffic classes available can be queried through lldptool. Also, which of those traffic classes have PFC enabled is also controlled through the same dcbnl_rtnl_ops callbacks. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | dpaa2-eth: Update FQ taildrop threshold and buffer pool countIoana Radulescu2020-06-011-12/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have congestion group taildrop configured at all times, we can afford to increase the frame queue taildrop threshold; this will ensure a better response when receiving bursts of large-sized frames. Also decouple the buffer pool count from the Rx FQ taildrop threshold, as above change would increase it too much. Instead, keep the old count as a hardcoded value. With the new limits, we try to ensure that: * we allow enough leeway for large frame bursts (by buffering enough of them in queues to avoid heavy dropping in case of bursty traffic, but when overall ingress bandwidth is manageable) * allow pending frames to be evenly spread between ingress FQs, regardless of frame size * avoid dropping frames due to the buffer pool being empty; this is not a bad behaviour per se, but system overall response is more linear and predictable when frames are dropped at frame queue/group level. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | dpaa2-eth: Add congestion group taildropIoana Radulescu2020-06-012-10/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The increase in number of ingress frame queues means we now risk depleting the buffer pool before the FQ taildrop kicks in. Congestion group taildrop allows us to control the number of frames that can accumulate on a group of Rx frame queues belonging to the same traffic class. This setting coexists with the frame queue based taildrop: whichever limit gets hit first triggers the frame drop. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | dpaa2-eth: Add helper functionsIoana Radulescu2020-06-013-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add convenient helper functions that determines whether Rx/Tx pause frames are enabled based on link state flags received from firmware. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | dpaa2-eth: Distribute ingress frames based on VLAN prioIoana Radulescu2020-06-015-0/+318
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configure static ingress classification based on VLAN PCP field. If the DPNI doesn't have enough traffic classes to accommodate all priority levels, the lowest ones end up on TC 0 (default on miss). Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | dpaa2-eth: Add support for Rx traffic classesIoana Radulescu2020-06-014-32/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The firmware reserves for each DPNI a number of RX frame queues equal to the number of configured flows x number of configured traffic classes. Current driver configuration directs all incoming traffic to FQs corresponding to TC0, leaving all other priority levels unused. Start adding support for multiple ingress traffic classes, by configuring the FQs associated with all priority levels, not just TC0. All settings that are per-TC, such as those related to hashing and flow steering, are also updated. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: phy: broadcom: don't export RDB/legacy access methodsMichael Walle2020-06-011-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't export __bcm_phy_enable_rdb_access() and __bcm_phy_enable_legacy_access() functions. They aren't used outside this module and it was forgotten to provide a prototype for these functions. Just make them static for now. Fixes: 11ecf8c55b91 ("net: phy: broadcom: add cable test support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 13:30:23 +0100