summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoCCristian Ciocaltea2021-06-281-1/+16
| | | | | | | | | | | | Add support for the missing NIC and ETHERNET clocks in the Actions Semi Owl S500 SoC clock driver. Additionally, change APB clock parent from AHB to the newly added NIC. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/d62e4f1f85c5cef05be14d9e8143e88bbddd2e0f.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoCCristian Ciocaltea2021-06-281-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | There are a few issues with the setup of the Actions Semi Owl S500 SoC's clock chain involving AHPPREDIV, H and AHB clocks: * AHBPREDIV clock is defined as a muxer only, although it also acts as a divider. * H clock is using a wrong divider register offset * AHB is defined as a multi-rate factor clock, but it is actually just a fixed pass clock. Let's provide the following fixes: * Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition. * Use the correct register shift value in the OWL_DIVIDER definition for H clock * Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an ungated OWL_COMP_FIXED_FACTOR definition. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/21c1abd19a7089b65a34852ac6513961be88cbe1.1623354574.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoCCristian Ciocaltea2021-06-281-15/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following clocks of the Actions Semi Owl S500 SoC have been defined to use a shared clock factor table 'bisp_factor_table[]': DE[1-2], VCE, VDE, BISP, SENSOR[0-1] There are several issues involved in this approach: * 'bisp_factor_table[]' describes the configuration of a regular 8-rates divider, so its usage is redundant. Additionally, judging by the BISP clock context, it is incomplete since it maps only 8 out of 12 possible entries. * The clocks mentioned above are not identical in terms of the available rates, therefore cannot rely on the same factor table. Specifically, BISP and SENSOR* are standard 12-rate dividers so their configuration should rely on a proper clock div table, while VCE and VDE require a factor table that is a actually a subset of the one needed for DE[1-2] clocks. Let's fix this by implementing the following: * Add new factor tables 'de_factor_table' and 'hde_factor_table' to properly handle DE[1-2], VCE and VDE clocks. * Add a common div table 'std12rate_div_table' for BISP and SENSOR[0-1] clocks converted to OWL_COMP_DIV. * Drop the now unused 'bisp_factor_table[]'. Additionally, drop the CLK_IGNORE_UNUSED flag for SENSOR[0-1] since there is no reason to always keep ON those clocks. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/e675820a46cd9930d8d576c6cae61d41c1a8416f.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: actions: Fix SD clocks factor table on Owl S500 SoCCristian Ciocaltea2021-06-281-4/+2
| | | | | | | | | | | Drop the unsupported entries in the factor table used for the SD[0-2] clocks definitions on the Actions Semi Owl S500 SoC. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/196c948d708a22b8198c95f064a0f6b6820f9980.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: actions: Fix UART clock dividers on Owl S500 SoCCristian Ciocaltea2021-06-281-6/+6
| | | | | | | | | | | Use correct divider registers for the Actions Semi Owl S500 SoC's UART clocks. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/4714d05982b19ac5fec2ed74f54be42d8238e392.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* fbmem: fix horribly incorrect placement of __maybe_unusedLinus Torvalds2021-05-091-1/+1
| | | | | | | | | | | | | | | | | | | Commit b9d79e4ca4ff ("fbmem: Mark proc_fb_seq_ops as __maybe_unused") places the '__maybe_unused' in an entirely incorrect location between the "struct" keyword and the structure name. It's a wonder that gcc accepts that silently, but clang quite reasonably warns about it: drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused seq_operations proc_fb_seq_ops = { ^ Fix it. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2021-05-0919-81/+332
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "Bit later than usual, I queued them all up on Friday then promptly forgot to write the pull request email. This is mainly amdgpu fixes, with some radeon/msm/fbdev and one i915 gvt fix thrown in. amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing msm: - NULL ptr dereference fix fbdev: - procfs disabled warning fix i915: - gvt: Fix a possible division by zero in vgpu display rate calculation" * tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: Use device specific BO size & stride check. drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode. drm/amd/pm: initialize variable drm/radeon: Avoid power table parsing memory leaks drm/radeon: Fix off-by-one power_state index heap overwrite drm/amd/display: Fix two cursor duplication when using overlay drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC fbmem: Mark proc_fb_seq_ops as __maybe_unused drm/msm/dpu: Delete bonkers code drm/i915/gvt: Prevent divided by zero when calculating refresh rate amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create drm/amdgpu: Register VGA clients after init can no longer fail drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown drm/amdgpu: fix r initial values drm/amd/display: fix wrong statement in mst hpd debugfs amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 drm/amd/display: Reject non-zero src_y and src_x for video planes
| * Merge tag 'amd-drm-fixes-5.13-2021-05-05' of ↵Dave Airlie2021-05-0714-45/+328
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-5.13-2021-05-05: amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210506033929.3875-1-alexander.deucher@amd.com
| | * drm/amdgpu: Use device specific BO size & stride check.Bas Nieuwenhuizen2021-05-061-6/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The builtin size check isn't really the right thing for AMD modifiers due to a couple of reasons: 1) In the format structs we don't do set any of the tilesize / blocks etc. to avoid having format arrays per modifier/GPU 2) The pitch on the main plane is pixel_pitch * bytes_per_pixel even for tiled ... 3) The pitch for the DCC planes is really the pixel pitch of the main surface that would be covered by it ... Note that we only handle GFX9+ case but we do this after converting the implicit modifier to an explicit modifier, so on GFX9+ all framebuffers should be checked here. There is a TODO about DCC alignment, but it isn't worse than before and I'd need to dig a bunch into the specifics. Getting this out in a reasonable timeframe to make sure it gets the appropriate testing seemed more important. Finally as I've found that debugging addfb2 failures is a pita I was generous adding explicit error messages to every failure case. Fixes: f258907fdd83 ("drm/amdgpu: Verify bo size can fit framebuffer size on init.") Tested-by: Simon Ser <contact@emersion.fr> Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.Bas Nieuwenhuizen2021-05-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise tiling modes that require the values form this field (In particular _*_X) would be corrupted upon video decode. Copied from the VCN v2 code. Fixes: 99541f392b4d ("drm/amdgpu: add mc resume DPG mode for VCN3.0") Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com> Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| | * drm/amd/pm: initialize variableTom Rix2021-05-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Static analysis reports this problem amdgpu_pm.c:478:16: warning: The right operand of '<' is a garbage value for (i = 0; i < data.nums; i++) { ^ ~~~~~~~~~ In some cases data is not set. Initialize to 0 and flag not setting data as an error with the existing check. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * drm/radeon: Avoid power table parsing memory leaksKees Cook2021-05-041-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid leaving a hanging pre-allocated clock_info if last mode is invalid, and avoid heap corruption if no valid modes are found. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537 Fixes: 6991b8f2a319 ("drm/radeon/kms: fix segfault in pm rework") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * drm/radeon: Fix off-by-one power_state index heap overwriteKees Cook2021-05-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An out of bounds write happens when setting the default power state. KASAN sees this as: [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 ================================================================== BUG: KASAN: slab-out-of-bounds in radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157 CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x239 kasan_report+0x170/0x1a8 radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] radeon_atombios_get_power_modes+0x144/0x1888 [radeon] radeon_pm_init+0x1019/0x1904 [radeon] rs690_init+0x76e/0x84a [radeon] radeon_device_init+0x1c1a/0x21e5 [radeon] radeon_driver_load_kms+0xf5/0x30b [radeon] drm_dev_register+0x255/0x4a0 [drm] radeon_pci_probe+0x246/0x2f6 [radeon] pci_device_probe+0x1aa/0x294 really_probe+0x30e/0x850 driver_probe_device+0xe6/0x135 device_driver_attach+0xc1/0xf8 __driver_attach+0x13f/0x146 bus_for_each_dev+0xfa/0x146 bus_add_driver+0x2b3/0x447 driver_register+0x242/0x2c1 do_one_initcall+0x149/0x2fd do_init_module+0x1ae/0x573 load_module+0x4dee/0x5cca __do_sys_finit_module+0xf1/0x140 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Without KASAN, this will manifest later when the kernel attempts to allocate memory that was stomped, since it collides with the inline slab freelist pointer: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 RIP: 0010:kfree+0x115/0x230 Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7 RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246 RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80 RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000 R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100 FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0 Call Trace: __free_fdtable+0x16/0x1f put_files_struct+0x81/0x9b do_exit+0x433/0x94d do_group_exit+0xa6/0xa6 __x64_sys_exit_group+0xf/0xf do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe80ef64bea Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0. RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0 R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0 Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ... Use a valid power_state index when initializing the "flags" and "misc" and "misc2" fields. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537 Reported-by: Erhard F. <erhard_f@mailbox.org> Fixes: a48b9b4edb8b ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)") Fixes: 79daedc94281 ("drm/radeon/kms: minor pm cleanups") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * drm/amd/display: Fix two cursor duplication when using overlayRodrigo Siqueira2021-05-041-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our driver supports overlay planes, and as expected, some userspace compositor takes advantage of these features. If the userspace is not enabling the cursor, they can use multiple planes as they please. Nevertheless, we start to have constraints when userspace tries to enable hardware cursor with various planes. Basically, we cannot draw the cursor at the same size and position on two separated pipes since it uses extra bandwidth and DML only run with one cursor. For those reasons, when we enable hardware cursor and multiple planes, our driver should accept variations like the ones described below: +-------------+ +--------------+ | +---------+ | | | | |Primary | | | Primary | | | | | | Overlay | | +---------+ | | | |Overlay | | | +-------------+ +--------------+ In this scenario, we can have the desktop UI in the overlay and some other framebuffer attached to the primary plane (e.g., video). However, userspace needs to obey some rules and avoid scenarios like the ones described below (when enabling hw cursor): +--------+ |Overlay | +-------------+ +-----+-------+ +-| |--+ | +--------+ | +--------+ | | +--------+ | | |Overlay | | |Overlay | | | | | | | | | | | | | | +--------+ | +--------+ | | | | Primary | | Primary | | Primary | +-------------+ +-------------+ +-------------+ +-------------+ +-------------+ | +--------+ | Primary | | |Overlay | | | | | | | | | +--------+ | +--------+ | | Primary | | |Overlay | | +-------------+ +-| |--+ +--------+ If the userspace violates some of the above scenarios, our driver needs to reject the commit; otherwise, we can have unexpected behavior. Since we don't have a proper driver validation for the above case, we can see some problems like a duplicate cursor in applications that use multiple planes. This commit fixes the cursor issue and others by adding adequate verification for multiple planes. Change since V1 (Harry and Sean): - Remove cursor verification from the equation. Cc: Louis Li <Ching-shih.Li@amd.com> Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * drm/amdgpu: add new MC firmware for Polaris12 32bit ASICEvan Quan2021-05-041-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Polaris12 32bit ASIC needs a special MC firmware. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| | * amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_createSimon Ser2021-04-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This error code-path is missing a drm_gem_object_put call. Other error code-paths are fine. Signed-off-by: Simon Ser <contact@emersion.fr> Fixes: 1769152ac64b ("drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| | * drm/amdgpu: Register VGA clients after init can no longer failKai-Heng Feng2021-04-291-15/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an amdgpu device fails to init, it makes another VGA device cause kernel splat: kernel: amdgpu 0000:08:00.0: amdgpu: amdgpu_device_ip_init failed kernel: amdgpu 0000:08:00.0: amdgpu: Fatal error during GPU init kernel: amdgpu: probe of 0000:08:00.0 failed with error -110 ... kernel: amdgpu 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none kernel: BUG: kernel NULL pointer dereference, address: 0000000000000018 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x0000) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0000 [#1] SMP NOPTI kernel: CPU: 6 PID: 1080 Comm: Xorg Tainted: G W 5.12.0-rc8+ #12 kernel: Hardware name: HP HP EliteDesk 805 G6/872B, BIOS S09 Ver. 02.02.00 12/30/2020 kernel: RIP: 0010:amdgpu_device_vga_set_decode+0x13/0x30 [amdgpu] kernel: Code: 06 31 c0 c3 b8 ea ff ff ff 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 8b 87 90 06 00 00 48 89 e5 53 89 f3 <48> 8b 40 18 40 0f b6 f6 e8 40 58 39 fd 80 fb 01 5b 5d 19 c0 83 e0 kernel: RSP: 0018:ffffae3c0246bd68 EFLAGS: 00010002 kernel: RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 kernel: RDX: ffff8dd1af5a8560 RSI: 0000000000000000 RDI: ffff8dce8c160000 kernel: RBP: ffffae3c0246bd70 R08: ffff8dd1af5985c0 R09: ffffae3c0246ba38 kernel: R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000246 kernel: R13: 0000000000000000 R14: 0000000000000003 R15: ffff8dce81490000 kernel: FS: 00007f9303d8fa40(0000) GS:ffff8dd1af580000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000018 CR3: 0000000103cfa000 CR4: 0000000000350ee0 kernel: Call Trace: kernel: vga_arbiter_notify_clients.part.0+0x4a/0x80 kernel: vga_get+0x17f/0x1c0 kernel: vga_arb_write+0x121/0x6a0 kernel: ? apparmor_file_permission+0x1c/0x20 kernel: ? security_file_permission+0x30/0x180 kernel: vfs_write+0xca/0x280 kernel: ksys_write+0x67/0xe0 kernel: __x64_sys_write+0x1a/0x20 kernel: do_syscall_64+0x38/0x90 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae kernel: RIP: 0033:0x7f93041e02f7 kernel: Code: 75 05 48 83 c4 58 c3 e8 f7 33 ff ff 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 kernel: RSP: 002b:00007fff60e49b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 kernel: RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f93041e02f7 kernel: RDX: 000000000000000b RSI: 00007fff60e49b40 RDI: 000000000000000f kernel: RBP: 00007fff60e49b40 R08: 00000000ffffffff R09: 00007fff60e499d0 kernel: R10: 00007f93049350b5 R11: 0000000000000246 R12: 000056111d45e808 kernel: R13: 0000000000000000 R14: 000056111d45e7f8 R15: 000056111d46c980 kernel: Modules linked in: nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_seq input_leds snd_seq_device snd_timer snd soundcore joydev kvm_amd serio_raw k10temp mac_hid hp_wmi ccp kvm sparse_keymap wmi_bmof ucsi_acpi efi_pstore typec_ucsi rapl typec video wmi sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid amdgpu drm_ttm_helper ttm iommu_v2 gpu_sched i2c_algo_bit drm_kms_helper syscopyarea sysfillrect crct10dif_pclmul sysimgblt crc32_pclmul fb_sys_fops ghash_clmulni_intel cec rc_core aesni_intel crypto_simd psmouse cryptd r8169 i2c_piix4 drm ahci xhci_pci realtek libahci xhci_pci_renesas gpio_amdpt gpio_generic kernel: CR2: 0000000000000018 kernel: ---[ end trace 76d04313d4214c51 ]--- Commit 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure") makes amdgpu_driver_unload_kms() skips amdgpu_device_fini(), so the VGA clients remain registered. So when vga_arbiter_notify_clients() iterates over registered clients, it causes NULL pointer dereference. Since there's no reason to register VGA clients that early, so solve the issue by putting them after all the goto cleanups. v2: - Remove redundant vga_switcheroo cleanup in failed: label. Fixes: 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardownPavan Kumar Ramayanam2021-04-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The runtime resume PM op disregards the return value from amdgpu_device_resume(), masking errors for failed resumes at the PM layer. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Pavan Kumar Ramayanam <pavan.ramayanam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * drm/amdgpu: fix r initial valuesVictor Zhao2021-04-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sriov gets suspend of IP block <dce_virtual> failed as return value was not initialized. v2: return 0 directly to align original code semantic before this was broken out into a separate helper function instead of setting initial values Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| | * drm/amd/display: fix wrong statement in mst hpd debugfsMikita Lipski2021-04-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [why] Previous statement would always evaluate to true making it meaningless [how] Just check if a connector is MST by checking if its port exists. Fixes: 41efcd3879b1df ("drm/amd/display: Add MST capability to trigger_hotplug interface") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <waynelin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpusDarren Powell2021-04-291-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | v2 : change condition to apply to all chips after NAVI10 Writing to dcefclk causes the gpu to become unresponsive, and requires a reboot. Patch prevents user from successfully writing to file pp_dpm_dcefclk on parts NAVI10 and newer, and gives better user feedback that this operation is not allowed. Signed-off-by: Darren Powell <darren.powell@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLIDDarren Powell2021-04-292-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Writing to dcefclk causes the gpu to become unresponsive, and requires a reboot. Patch ignores a .force_clk_levels(SMU_DCEFCLK) call and issues an info message. Signed-off-by: Darren Powell <darren.powell@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2Christian König2021-04-293-8/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with Vega the hardware supports concurrent flushes of VMID which can be used to implement per process VMID allocation. But concurrent flushes are mutual exclusive with back to back VMID allocations, fix this to avoid a VMID used in two ways at the same time. v2: don't set ring to NULL Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| | * drm/amd/display: Reject non-zero src_y and src_x for video planesHarry Wentland2021-04-291-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] This hasn't been well tested and leads to complete system hangs on DCN1 based systems, possibly others. The system hang can be reproduced by gesturing the video on the YouTube Android app on ChromeOS into full screen. [How] Reject atomic commits with non-zero drm_plane_state.src_x or src_y values. v2: - Add code comment describing the reason we're rejecting non-zero src_x and src_y - Drop gerrit Change-Id - Add stable CC - Based on amd-staging-drm-next v3: removed trailing whitespace Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Cc: nicholas.kazlauskas@amd.com Cc: amd-gfx@lists.freedesktop.org Cc: alexander.deucher@amd.com Cc: Roman.Li@amd.com Cc: hersenxs.wu@amd.com Cc: danny.wang@amd.com Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| * | Merge tag 'drm-misc-next-fixes-2021-05-06' of ↵Dave Airlie2021-05-074-33/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next Two patches, one to fix a null pointer dereference in msm, and one to fix an unused warning for in fbdev when PROCFS is disabled. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 06 May 2021 22:26:35 AEST # gpg: using ? key E3EF0D6F671851C5 # gpg: Can't check signature: unknown pubkey algorithm From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210506122723.oqadel7oacazywij@gilmour
| | * | fbmem: Mark proc_fb_seq_ops as __maybe_unusedGuenter Roeck2021-05-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With CONFIG_PROC_FS=n and -Werror, 0-day reports: drivers/video/fbdev/core/fbmem.c:736:36: error: 'proc_fb_seq_ops' defined but not used Mark it as __maybe_unused. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210504142910.2084722-1-linux@roeck-us.net
| | * | drm/msm/dpu: Delete bonkers codeRob Clark2021-05-033-32/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dpu_crtc_atomic_flush() was directly poking it's attached planes in a code path that ended up in dpu_plane_atomic_update(), even if the plane was not involved in the current atomic update. While a bit dubious, this worked before because plane->state would always point to something valid. But now using drm_atomic_get_new_plane_state() we could get a NULL state pointer instead, leading to: [ 20.873273] Call trace: [ 20.875740] dpu_plane_atomic_update+0x5c/0xed0 [ 20.880311] dpu_plane_restore+0x40/0x88 [ 20.884266] dpu_crtc_atomic_flush+0xf4/0x208 [ 20.888660] drm_atomic_helper_commit_planes+0x150/0x238 [ 20.894014] msm_atomic_commit_tail+0x1d4/0x7a0 [ 20.898579] commit_tail+0xa4/0x168 [ 20.902102] drm_atomic_helper_commit+0x164/0x178 [ 20.906841] drm_atomic_commit+0x54/0x60 [ 20.910798] drm_atomic_connector_commit_dpms+0x10c/0x118 [ 20.916236] drm_mode_obj_set_property_ioctl+0x1e4/0x440 [ 20.921588] drm_connector_property_set_ioctl+0x60/0x88 [ 20.926852] drm_ioctl_kernel+0xd0/0x120 [ 20.930807] drm_ioctl+0x21c/0x478 [ 20.934235] __arm64_sys_ioctl+0xa8/0xe0 [ 20.938193] invoke_syscall+0x64/0x130 [ 20.941977] el0_svc_common.constprop.3+0x5c/0xe0 [ 20.946716] do_el0_svc+0x80/0xa0 [ 20.950058] el0_svc+0x20/0x30 [ 20.953145] el0_sync_handler+0x88/0xb0 [ 20.957014] el0_sync+0x13c/0x140 The reason for the codepath seems dubious, the atomic suspend/resume heplers should handle the power-collapse case. If not, the CRTC's atomic_check() should be adding the planes to the atomic update. Reported-by: Stephen Boyd <swboyd@chromium.org> Reported-by: John Stultz <john.stultz@linaro.org> Fixes: 37418bf14c13 ("drm: Use state helper instead of the plane state pointer") Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210430171744.1721408-1-robdclark@gmail.com
| * | | Merge tag 'drm-intel-next-fixes-2021-04-30' of ↵Dave Airlie2021-05-071-3/+3
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 GVT fixes for v5.13-rc1: - Fix a possible division by zero in vgpu display rate calculation Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87wnsk16sa.fsf@intel.com
| | * \ \ Merge tag 'gvt-next-fixes-2021-04-29' of https://github.com/intel/gvt-linux ↵Jani Nikula2021-04-291-3/+3
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-intel-next-fixes gvt-next-fixes-2021-04-29 - Fix possible divide error in vgpu display rate calculation (Colin) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210429085142.GT1551@zhen-hp.sh.intel.com
| | | * | | drm/i915/gvt: Prevent divided by zero when calculating refresh rateColin Xu2021-04-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To get refresh rate as vblank timer period and keep the precision, the calculation of rate is multiplied by 1000. However old logic was using: rate = pixel clock / (h * v / 1000). When the h/v total is invalid, like all 0, h * v / 1000 will be rounded to 0, which leads to a divided by 0 fault. 0 H/V are already checked above. Instead of divide after divide, refine the calculation to divide after multiply: "pixel clock * 1000 / (h * v)" Guest driver should guarantee the correctness of the timing regs' value. Fixes: 6a4500c7b83f ("drm/i915/gvt: Get accurate vGPU virtual display refresh rate from vreg") Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210416083355.159305-1-colin.xu@intel.com Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
* | | | | | drm/i915/display: fix compiler warning about array overrunLinus Torvalds2021-05-081-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event Status Indicator data, but then passes that buffer at offset 10 off as an argument to drm_dp_channel_eq_ok(). End result: there are only 4 bytes remaining of the buffer, yet drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns about this case: drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’: drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread] 3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’} In file included from drivers/gpu/drm/i915/display/intel_dp.c:38: include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’ 1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], | ^~~~~~~~~~~~~~~~~~~~ 6:14 elapsed This commit just extends the original array by 2 zero-initialized bytes, avoiding the warning. There may be some underlying bug in here that caused this confusion, but this is at least no worse than the existing situation that could use random data off the stack. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2021-05-0810-485/+434
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more SCSI updates from James Bottomley: "This is a set of minor fixes in various drivers (qla2xxx, ufs, scsi_debug, lpfc) one doc fix and a fairly large update to the fnic driver to remove the open coded iteration functions in favour of the scsi provided ones" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fnic: Use scsi_host_busy_iter() to traverse commands scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io() scsi: scsi_debug: Fix cmd_per_lun, set to max_queue scsi: ufs: core: Narrow down fast path in system suspend path scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend scsi: ufs: core: Do not put UFS power into LPM if link is broken scsi: qla2xxx: Prevent PRLI in target mode scsi: qla2xxx: Add marginal path handling support scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found scsi: ufs: core: Fix a typo in ufs-sysfs.c scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command scsi: lpfc: Fix DMA virtual address ptr assignment in bsg scsi: lpfc: Fix illegal memory access on Abort IOCBs scsi: blk-mq: Fix build warning when making htmldocs
| * | | | | | scsi: fnic: Use scsi_host_busy_iter() to traverse commandsHannes Reinecke2021-05-031-446/+375
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use scsi_host_busy_iter() to traverse commands instead of hand-crafted routines walking the command list. Link: https://lore.kernel.org/r/20210429122517.39659-3-hare@suse.de Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io()Hannes Reinecke2021-05-031-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'exclude_id' is always SCSI_NO_TAG which will never be reached when traversing the list of tags. Link: https://lore.kernel.org/r/20210429122517.39659-2-hare@suse.de Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: scsi_debug: Fix cmd_per_lun, set to max_queueDouglas Gilbert2021-05-031-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure that the cmd_per_lun value placed in the host template never exceeds the can_queue value. If the max_queue driver parameter is not specified then both cmd_per_lun and can_queue are set to CAN_QUEUE. CAN_QUEUE is a compile time constant and is used to dimension an array to hold queued requests. If the max_queue driver parameter is given it is must be less than or equal to CAN_QUEUE and if so, the host template values are adjusted. Remove undocumented code that allowed queue_depth to exceed CAN_QUEUE and cause stack full type errors. There is a documented way to do that with every_nth and echo 0x8000 > /sys/bus/pseudo/drivers/scsi_debug/opts See: https://sg.danny.cz/sg/scsi_debug.html Tweak some formatting, and add a suggestion to the "trim poll_queues" warning. Link: https://lore.kernel.org/r/20210415015031.607153-1-dgilbert@interlog.com Reported-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: John Garry <john.garry@hauwei.com> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: ufs: core: Narrow down fast path in system suspend pathCan Guo2021-04-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If spm_lvl is set to 0 or 1, when system suspend kicks start and HBA is runtime active, system suspend may just bail without doing anything (the fast path), leaving other contexts still running, e.g., clock gating and clock scaling. When system resume kicks start, concurrency can happen between ufshcd_resume() and these contexts, leading to various stability issues. Add a check against HBA's runtime state and allowing fast path only if HBA is runtime suspended, otherwise let system suspend go ahead call ufshcd_suspend(). This will guarantee that these contexts are stopped by either runtime suspend or system suspend. Link: https://lore.kernel.org/r/1619408921-30426-4-git-send-email-cang@codeaurora.org Fixes: 0b257734344a ("scsi: ufs: optimize system suspend handling") Reviewed-by: Daejun Park <daejun7.park@samsung.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspendCan Guo2021-04-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During ufs system suspend, leaving rpm_dev_flush_recheck_work running or pending is risky because concurrency may happen between system suspend/resume and runtime resume routine. Fix this by cancelling rpm_dev_flush_recheck_work synchronously during system suspend. Link: https://lore.kernel.org/r/1619408921-30426-3-git-send-email-cang@codeaurora.org Fixes: 51dd905bd2f6 ("scsi: ufs: Fix WriteBooster flush during runtime suspend") Reviewed-by: Daejun Park <daejun7.park@samsung.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: ufs: core: Do not put UFS power into LPM if link is brokenCan Guo2021-04-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During resume, if link is broken due to AH8 failure, make sure ufshcd_resume() does not put UFS power back into LPM. Link: https://lore.kernel.org/r/1619408921-30426-2-git-send-email-cang@codeaurora.org Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths") Reviewed-by: Daejun Park <daejun7.park@samsung.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: qla2xxx: Prevent PRLI in target modeAnastasia Kovaleva2021-04-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In a case when the initiator in P2P mode by some circumstances does not send PRLI, the target, in a case when the target port's WWPN is less than initiator's, changes the discovery state in DSC_GNL. When gnl completes it sends PRLI to the initiator. Usually the initiator in P2P mode always sends PRLI. We caught this issue on Linux stable v5.4.6 https://www.spinics.net/lists/stable/msg458515.html. Fix this particular corner case in the behaviour of the P2P mod target login state machine. Link: https://lore.kernel.org/r/20210422153414.4022-1-a.kovaleva@yadro.com Fixes: a9ed06d4e640 ("scsi: qla2xxx: Allow PLOGI in target mode") Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: qla2xxx: Add marginal path handling supportBikash Hazarika2021-04-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for eh_should_retry_cmd callback in qla2xxx host template. Link: https://lore.kernel.org/r/20210427050914.7270-1-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not foundBodo Stroesser2021-04-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If tcmu_handle_completions() finds an invalid cmd_id while looping over cmd responses from userspace it sets TCMU_DEV_BIT_BROKEN and breaks the loop. This means that it does further handling for the tcmu device. Skip that handling by replacing 'break' with 'return'. Additionally change tcmu_handle_completions() from unsigned int to bool, since the value used in return already is bool. Link: https://lore.kernel.org/r/20210423150123.24468-1-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: ufs: core: Fix a typo in ufs-sysfs.cKeoseong Park2021-04-291-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following typo: ufschd_uic_link_state_to_string() -> ufshcd_uic_link_state_to_string() ufschd_ufs_dev_pwr_mode_to_string() -> ufshcd_ufs_dev_pwr_mode_to_string() Link: https://lore.kernel.org/r/1381713434.61619509208911.JavaMail.epsvc@epcpadp3 Signed-off-by: Keoseong Park <keosung.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: lpfc: Fix bad memory access during VPD DUMP mailbox commandJames Smart2021-04-272-13/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dump command for reading a region passes a requested read length specified in words (4-byte units). The response overwrites the same field with the actual number of bytes read. The mailbox handler for DUMP which reads VPD data (region 23) is treating the response field as if it were still a word_cnt, thus multiplying it by 4 to set the read's "length". Given the read value was calculated based on the size of the read buffer, the longer response length runs off the end of the buffer. Fix by reworking the code to use the response field as a byte count. Link: https://lore.kernel.org/r/20210421234511.102206-1-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: lpfc: Fix DMA virtual address ptr assignment in bsgJames Smart2021-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lpfc_bsg_ct_unsol_event() routine acts assigns a ct_request to the wrong structure address, resulting in a bad address that results in bsg related timeouts. Correct the ct_request assignment to use the kernel virtual buffer address (not the control structure address). Link: https://lore.kernel.org/r/20210421234448.102132-1-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: lpfc: Fix illegal memory access on Abort IOCBsJames Smart2021-04-271-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In devloss timer handler and in backend calls to terminate remote port I/O, there is logic to walk through all active IOCBs and validate them to potentially trigger an abort request. This logic is causing illegal memory accesses which leads to a crash. Abort IOCBs, which may be on the list, do not have an associated lpfc_io_buf struct. The driver is trying to map an lpfc_io_buf struct on the IOCB and which results in a bogus address thus the issue. Fix by skipping over ABORT IOCBs (CLOSE IOCBs are ABORTS that don't send ABTS) in the IOCB scan logic. Link: https://lore.kernel.org/r/20210421234433.102079-1-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | | | | | | Merge tag 'kbuild-v5.13-2' of ↵Linus Torvalds2021-05-083-4/+7
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - Convert sh and sparc to use generic shell scripts to generate the syscall headers - refactor .gitignore files - Update kernel/config_data.gz only when the content of the .config is really changed, which avoids the unneeded re-link of vmlinux - move "remove stale files" workarounds to scripts/remove-stale-files - suppress unused-but-set-variable warnings by default for Clang as well - fix locale setting LANG=C to LC_ALL=C - improve 'make distclean' - always keep intermediate objects from scripts/link-vmlinux.sh - move IF_ENABLED out of <linux/kconfig.h> to make it self-contained - misc cleanups * tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h> kbuild: Don't remove link-vmlinux temporary files on exit/signal kbuild: remove the unneeded comments for external module builds kbuild: make distclean remove tag files in sub-directories kbuild: make distclean work against $(objtree) instead of $(srctree) kbuild: refactor modname-multi by using suffix-search kbuild: refactor fdtoverlay rule kbuild: parameterize the .o part of suffix-search arch: use cross_compiling to check whether it is a cross build or not kbuild: remove ARCH=sh64 support from top Makefile .gitignore: prefix local generated files with a slash kbuild: replace LANG=C with LC_ALL=C Makefile: Move -Wno-unused-but-set-variable out of GCC only block kbuild: add a script to remove stale generated files kbuild: update config_data.gz only when the content of .config is changed .gitignore: ignore only top-level modules.builtin .gitignore: move tags and TAGS close to other tag files kernel/.gitgnore: remove stale timeconst.h and hz.bc usr/include: refactor .gitignore genksyms: fix stale comment ...
| * | | | | | | linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>Masahiro Yamada2021-05-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <linux/kconfig.h> is included from all the kernel-space source files, including C, assembly, linker scripts. It is intended to contain a minimal set of macros to evaluate CONFIG options. IF_ENABLED() is an intruder here because (x ? y : z) is C code, which should not be included from assembly files or linker scripts. Also, <linux/kconfig.h> is no longer self-contained because NULL is defined in <linux/stddef.h>. Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF() takes the general boolean expression instead of a CONFIG option so that it fits better in <linux/kernel.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org>
| * | | | | | | .gitignore: prefix local generated files with a slashMasahiro Yamada2021-05-012-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pattern prefixed with '/' matches files in the same directory, but not ones in sub-directories. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Andra Paraschiv <andraprs@amazon.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com>
* | | | | | | | Merge tag 'net-5.13-rc1' of ↵Linus Torvalds2021-05-0836-165/+172
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc1, including fixes from bpf, can and netfilter trees. Self-contained fixes, nothing risky. Current release - new code bugs: - dsa: ksz: fix a few bugs found by static-checker in the new driver - stmmac: fix frame preemption handshake not triggering after interface restart Previous releases - regressions: - make nla_strcmp handle more then one trailing null character - fix stack OOB reads while fragmenting IPv4 packets in openvswitch and net/sched - sctp: do asoc update earlier in sctp_sf_do_dupcook_a - sctp: delay auto_asconf init until binding the first addr - stmmac: clear receive all(RA) bit when promiscuous mode is off - can: mcp251x: fix resume from sleep before interface was brought up Previous releases - always broken: - bpf: fix leakage of uninitialized bpf stack under speculation - bpf: fix masking negation logic upon negative dst register - netfilter: don't assume that skb_header_pointer() will never fail - only allow init netns to set default tcp cong to a restricted algo - xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid false positive errors - ethtool: fix missing NLM_F_MULTI flag when dumping - can: m_can: m_can_tx_work_queue(): fix tx_skb race condition - sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b - bridge: fix NULL-deref caused by a races between assigning rx_handler_data and setting the IFF_BRIDGE_PORT bit Latecomer: - seg6: add counters support for SRv6 Behaviors" * tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) atm: firestream: Use fallthrough pseudo-keyword net: stmmac: Do not enable RX FIFO overflow interrupts mptcp: fix splat when closing unaccepted socket i40e: Remove LLDP frame filters i40e: Fix PHY type identifiers for 2.5G and 5G adapters i40e: fix the restart auto-negotiation after FEC modified i40e: Fix use-after-free in i40e_client_subtask() i40e: fix broken XDP support netfilter: nftables: avoid potential overflows on 32bit arches netfilter: nftables: avoid overflows in nft_hash_buckets() tcp: Specify cmsgbuf is user pointer for receive zerocopy. mlxsw: spectrum_mr: Update egress RIF list before route's action net: ipa: fix inter-EE IRQ register definitions can: m_can: m_can_tx_work_queue(): fix tx_skb race condition can: mcp251x: fix resume from sleep before interface was brought up can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe netfilter: nftables: Fix a memleak from userdata error path in new objects netfilter: remove BUG_ON() after skb_header_pointer() netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check ...
| * \ \ \ \ \ \ \ Merge branch '40GbE' of ↵Jakub Kicinski2021-05-088-62/+15
| |\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Nguyen, Anthony L says: ==================== Intel Wired LAN Driver Updates 2021-05-07 This series contains updates to i40e driver only. Magnus fixes XDP by adding and correcting checks that were caused by a previous commit which introduced a new variable but did not account for it in all paths. Yunjian Wang adds a return in an error path to prevent reading a freed pointer. Jaroslaw forces link reset when changing FEC so that changes take affect. Mateusz fixes PHY types for 2.5G and 5G as there is a differentiation on PHY identifiers based on operation. Arkadiusz removes filtering of LLDP frames for software DCB as this is preventing them from being properly transmitted. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Remove LLDP frame filters i40e: Fix PHY type identifiers for 2.5G and 5G adapters i40e: fix the restart auto-negotiation after FEC modified i40e: Fix use-after-free in i40e_client_subtask() i40e: fix broken XDP support ==================== Link: https://lore.kernel.org/r/20210507164151.2878147-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-10 06:27:07 +0100