summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: Add NPCM7xx PWM and Fan driverTomer Maimon2018-07-093-0/+1068
| | | | | | | | | | | | | | | Add Nuvoton BMC NPCM750/730/715/705 Pulse Width Modulation (PWM) and Fan tacho driver. The Nuvoton BMC NPCM750/730/715/705 supports 8 PWM controller outputs and 16 Fan controller inputs. The driver provides a sysfs entries through which the user can configure the duty-cycle value from 0(off) and 255(full speed) and read the fan tacho rpm value. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/max34440) Add support for MAX34451.Kun Yi2018-07-092-4/+91
| | | | | | | | MAX34451 is a 16-Channel Voltage/Current Monitor and 12-Channel Sequencer. Signed-off-by: Kun Yi <kunyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (mlxreg-fan) Add support for Mellanox FAN driverVadim Pasternak2018-07-093-0/+502
| | | | | | | | | | | | | | | | | | | Driver obtains PWM and tachometers registers location according to the system configuration and creates FAN/PWM hwmon objects and a cooling device. PWM and tachometers are controlled through the on-board programmable device, which exports its register map. This device could be attached to any bus type, for which register mapping is supported. Single instance is created with one PWM control, up to 12 tachometers and one cooling device. It could be as many instances as programmable device supports. Currently driver will be activated from the Mellanox platform driver: drivers/platform/x86/mlx-platform.c. For the future ARM based systems it could be activated from the ARM platform module. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Mark expected switch fall-throughsGustavo A. R. Silva2018-07-092-1/+3
| | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct6775) Fix comment in the description of pwm_modeGuenter Roeck2018-07-091-2/+2
| | | | | | | | | | Commit 415eb2a1aaa488 ("hwmon: (nct6775) Fix writing pwmX_mode") changed the definition of the pwm_mode variable, but did not update the comment describing it. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct7904) Fix UNSPECIFIED_INT warningJakob Albert2018-07-091-4/+4
| | | | | | | | Fix UNSPECIFIED_INT warning reported by checkpatch.pl Signed-off-by: Lorenz Kaestle <lorenz.kaestle@fau.de> Signed-off-by: Jakob Albert <jakob.j.albert@fau.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct7904) Fix CODE_INDENT errorJakob Albert2018-07-091-24/+24
| | | | | | | | Fix CODE_INDENT error reported by checkpatch.pl Signed-off-by: Lorenz Kaestle <lorenz.kaestle@fau.de> Signed-off-by: Jakob Albert <jakob.j.albert@fau.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct7904) Fix SPACING errorsJakob Albert2018-07-091-6/+6
| | | | | | | | Fix SPACING errors reported by checkpatch.pl Signed-off-by: Lorenz Kaestle <lorenz.kaestle@fau.de> Signed-off-by: Jakob Albert <jakob.j.albert@fau.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Merge tag 'armsoc-fixes' of ↵Linus Torvalds2018-07-081-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A small collection of fixes, sort of the usual at this point, all for i.MX or OMAP: - Enable ULPI drivers on i.MX to avoid a hang - Pinctrl fix for touchscreen on i.MX51 ZII RDU1 - Fixes for ethernet clock references on am3517 - mmc0 write protect detection fix for am335x - kzalloc->kcalloc conversion in an OMAP driver - USB metastability fix for USB on dra7 - Fix touchscreen wakeup on am437x" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx_v4_v5_defconfig: Select ULPI support ARM: imx_v6_v7_defconfig: Select ULPI support ARM: dts: omap3: Fix am3517 mdio and emac clock references ARM: dts: am335x-bone-common: Fix mmc0 Write Protect bus: ti-sysc: Use 2-factor allocator arguments ARM: dts: dra7: Disable metastability workaround for USB2 ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl ARM: dts: am437x: make edt-ft5x06 a wakeup source
| * Merge tag 'omap-for-v4.18/fixes-signed' of ↵Olof Johansson2018-07-051-4/+4
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omap for v4.18-rc cycle Few dts fixes for regressions for various SoCs and devices for touchscreen wake, dra7 USB quirk, pinmux for beaglebone mmc, and emac clock. Also included is a change for ti-sysc to use kcalloc that Kees wanted to get into v4.18 as that's the last one he wanted to fix for improved defense against allocation overflows. * tag 'omap-for-v4.18/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3: Fix am3517 mdio and emac clock references ARM: dts: am335x-bone-common: Fix mmc0 Write Protect bus: ti-sysc: Use 2-factor allocator arguments ARM: dts: dra7: Disable metastability workaround for USB2 ARM: dts: am437x: make edt-ft5x06 a wakeup source Signed-off-by: Olof Johansson <olof@lixom.net>
| | * bus: ti-sysc: Use 2-factor allocator argumentsKees Cook2018-07-021-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | This adjusts the allocator calls to use 2-factor argument call style, as done treewide already for improved defense against allocation overflows. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | Merge tag 'pci-v4.18-fixes-2' of ↵Linus Torvalds2018-07-0810-12/+41
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix a use-after-free in the endpoint code (Dan Carpenter) - Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven) - Fix an nfp regression caused by a change in how we limit the number of VFs we can enable (Jakub Kicinski) - Fix failure path cleanup issues in the new R-Car gen3 PHY support (Marek Vasut) - Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc Guire) * tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: nfp: stop limiting VFs to 0 PCI/IOV: Reset total_VFs limit after detaching PF driver PCI: faraday: Add missing of_node_put() PCI: xilinx-nwl: Add missing of_node_put() PCI: xilinx: Add missing of_node_put() PCI: endpoint: Use after free in pci_epf_unregister_driver() PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes PCI: rcar: Clean up PHY init on failure PCI: rcar: Shut the PHY down in failpath
| * | | nfp: stop limiting VFs to 0Jakub Kicinski2018-06-291-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"), pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual functions". After 8d85a7a4f2c9, it means "we can't enable *any* VFs". That broke this scenario where nfp intends to remove any limit on the number of VFs that can be enabled: nfp_pci_probe nfp_pcie_sriov_read_nfd_limit nfp_rtsym_read_le("nfd_vf_cfg_max_vfs", &err) pci_sriov_set_totalvfs(pf->pdev, 0) # if FW didn't expose a limit ... # userspace writes N to sysfs "sriov_numvfs": sriov_numvfs_store pci_sriov_get_totalvfs # now returns 0 return -ERANGE Prior to 8d85a7a4f2c9, pci_sriov_get_totalvfs() returned TotalVFs, but it now returns 0. Remove the pci_sriov_set_totalvfs(pdev, 0) calls so we don't limit the number of VFs that can be enabled. Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI/IOV: Reset total_VFs limit after detaching PF driverJakub Kicinski2018-06-293-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TotalVFs register in the SR-IOV capability is the hardware limit on the number of VFs. A PF driver can limit the number of VFs further with pci_sriov_set_totalvfs(). When the PF driver is removed, reset any VF limit that was imposed by the driver because that limit may not apply to other drivers. Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"), pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual functions", and the nfp driver used that to remove the VF limit when the driver unloads. 8d85a7a4f2c9 broke that because instead of removing the VF limit, pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that limit persists even if another driver is loaded. We could fix that by making the nfp driver reset the limit when it unloads, but it seems more robust to do it in the PCI core instead of relying on the driver. The regression scenario is: nfp_pci_probe (driver 1) ... nfp_pci_remove pci_sriov_set_totalvfs(pf->pdev, 0) # limits VFs to 0 ... nfp_pci_probe (driver 2) nfp_rtsym_read_le("nfd_vf_cfg_max_vfs") # no VF limit from firmware Now driver 2 is broken because the VF limit is still 0 from driver 1. Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> [bhelgaas: changelog, rename functions] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI: faraday: Add missing of_node_put()Nicholas Mc Guire2018-06-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here in the error path and after the last usage. Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
| * | | PCI: xilinx-nwl: Add missing of_node_put()Nicholas Mc Guire2018-06-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here after the last usage. Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI: xilinx: Add missing of_node_put()Nicholas Mc Guire2018-06-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here after the last usage. Fixes: 8961def56845 ("PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> [lorenzo.pieralisi@arm.com: reworked commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI: endpoint: Use after free in pci_epf_unregister_driver()Dan Carpenter2018-06-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to use list_for_each_entry_safe() because the pci_ep_cfs_remove_epf_group() function frees "group". Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | | PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yesGeert Uytterhoeven2018-06-291-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCIE_DW_PLAT_HOST does not have any platform dependency, so it should not default to yes. Fixes: 1d906b22076e12cf ("PCI: dwc: Add support for EP mode") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
| * | | PCI: rcar: Clean up PHY init on failureMarek Vasut2018-06-291-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the Gen3 PHY fails to power up, the code does not undo the initialization caused by phy_init(). Add the missing failure handling to the rcar_pcie_phy_init_gen3() function. Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Wolfram Sang <wsa@the-dreams.de>
| * | | PCI: rcar: Shut the PHY down in failpathMarek Vasut2018-06-291-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If anything fails past phy_init_fn() and the system is a Gen3 with a PHY, the PHY will be left on and inited. This is caused by the phy_init_fn, which is in fact a pointer to rcar_pcie_phy_init_gen3() function, which starts the PHY, yet has no counterpart in the failpath. Add that counterpart. Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support") Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Wolfram Sang <wsa@the-dreams.de>
* | | | Merge tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2018-07-082-17/+46
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull dma-mapping fix from Christoph Hellwig: "Revert an incorrect dma-mapping commit for 4.18-rc" * tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mapping: Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"
| * | | | Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up ↵Christoph Hellwig2018-07-052-17/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | intel_{alloc,free}_coherent()" This commit may cause a less than required dma mask to be used for some allocations, which apparently leads to module load failures for iwlwifi sometimes. This reverts commit d657c5c73ca987214a6f9436e435b34fc60f332a. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Fabio Coatti <fabio.coatti@gmail.com> Tested-by: Fabio Coatti <fabio.coatti@gmail.com>
* | | | | Merge tag 'dmaengine-fix-4.18-rc4' of ↵Linus Torvalds2018-07-083-3/+7
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "We have few odd driver fixes and one email update change for you this time: - Driver fixes for k3dma (off by one), pl330 (burst residue granularity) and omap-dma (incorrect residue_granularity) - Sinan's email update" * tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate() dmaengine: pl330: report BURST residue granularity MAINTAINERS: Update email-id of Sinan Kaya dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
| * | | | | dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()Dan Carpenter2018-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The d->chans[] array has d->dma_requests elements so the > should be >= here. Fixes: 8e6152bc660e ("dmaengine: Add hisilicon k3 DMA engine driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | | | | dmaengine: pl330: report BURST residue granularityMarek Szyprowski2018-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reported residue is already calculated in BURST unit granularity, so advertise this capability properly to other devices in the system. Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | | | | dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularityJanusz Krzysztofik2018-06-191-1/+5
| | |_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0198d7bb8a0c ("ASoC: omap-mcbsp: Convert to use the sdma-pcm instead of omap-pcm") resulted in broken audio playback on OMAP1510 (discovered on Amstrad Delta). When running on OMAP1510, omap-pcm used to obtain DMA offset from snd_dmaengine_pcm_pointer_no_residue() based on DMA interrupt triggered software calculations instead of snd_dmaengine_pcm_pointer() which depended on residue value calculated from omap_dma_get_src_pos(). Similar code path is still available in now used sound/soc/soc-generic-dmaengine-pcm.c but it is not triggered. It was verified already before that omap_get_dma_src_pos() from arch/arm/plat-omap/dma.c didn't work correctly for OMAP1510 - see commit 1bdd7419910c ("ASoC: OMAP: fix OMAP1510 broken PCM pointer callback") for details. Apparently the same applies to its successor, omap_dma_get_src_pos() from drivers/dma/ti/omap-dma.c. On the other hand, snd_dmaengine_pcm_pointer_no_residue() is described as depreciated and discouraged for use in new drivers because of its unreliable accuracy. However, it seems the only working option for OPAM1510 now, as long as a software calculated residue is not implemented as OMAP1510 fallback in omap-dma. Using snd_dmaengine_pcm_pointer_no_residue() code path instead of snd_dmaengine_pcm_pointer() in sound/soc/soc-generic-dmaengine-pcm.c can be triggered in two ways: - by passing pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE from sound/soc/omap/sdma-pcm.c, - by passing dma_caps.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR from DMA engine. Let's do the latter. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | | | | Merge tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds2018-07-082-23/+14
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull IPMI fixes from Corey Minyard: "A couple of small fixes: one to the BMC side of things that fixes an interrupt issue, and one oops fix if init fails in a certain way on the client driver" * tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc: fix IRQ exception if the channel is not open ipmi: Cleanup oops on initialization failure
| * | | | | ipmi: kcs_bmc: fix IRQ exception if the channel is not openHaiyue Wang2018-06-251-21/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When kcs_bmc_handle_event calls kcs_force_abort function to handle the not open (no user running) KCS channel transaction, the returned status value -ENODEV causes the low level IRQ handler indicating that the irq was not for him by returning IRQ_NONE. After some time, this IRQ will be treated to be spurious one, and the exception dump happens. irq 30: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.15-npcm750 #1 Hardware name: NPCMX50 Chip family [<c010b264>] (unwind_backtrace) from [<c0106930>] (show_stack+0x20/0x24) [<c0106930>] (show_stack) from [<c03dad38>] (dump_stack+0x8c/0xa0) [<c03dad38>] (dump_stack) from [<c0168810>] (__report_bad_irq+0x3c/0xdc) [<c0168810>] (__report_bad_irq) from [<c0168c34>] (note_interrupt+0x29c/0x2ec) [<c0168c34>] (note_interrupt) from [<c0165c80>] (handle_irq_event_percpu+0x5c/0x68) [<c0165c80>] (handle_irq_event_percpu) from [<c0165cd4>] (handle_irq_event+0x48/0x6c) [<c0165cd4>] (handle_irq_event) from [<c0169664>] (handle_fasteoi_irq+0xc8/0x198) [<c0169664>] (handle_fasteoi_irq) from [<c016529c>] (__handle_domain_irq+0x90/0xe8) [<c016529c>] (__handle_domain_irq) from [<c01014bc>] (gic_handle_irq+0x58/0x9c) [<c01014bc>] (gic_handle_irq) from [<c010752c>] (__irq_svc+0x6c/0x90) Exception stack(0xc0a01de8 to 0xc0a01e30) 1de0: 00002080 c0a6fbc0 00000000 00000000 00000000 c096d294 1e00: 00000000 00000001 dc406400 f03ff100 00000082 c0a01e94 c0a6fbc0 c0a01e38 1e20: 00200102 c01015bc 60000113 ffffffff [<c010752c>] (__irq_svc) from [<c01015bc>] (__do_softirq+0xbc/0x358) [<c01015bc>] (__do_softirq) from [<c011c798>] (irq_exit+0xb8/0xec) [<c011c798>] (irq_exit) from [<c01652a0>] (__handle_domain_irq+0x94/0xe8) [<c01652a0>] (__handle_domain_irq) from [<c01014bc>] (gic_handle_irq+0x58/0x9c) [<c01014bc>] (gic_handle_irq) from [<c010752c>] (__irq_svc+0x6c/0x90) Exception stack(0xc0a01ef8 to 0xc0a01f40) 1ee0: 00000000 000003ae 1f00: dcc0f338 c0111060 c0a00000 c0a0cc44 c0a0cbe4 c0a1c22b c07bc218 00000001 1f20: dcffca40 c0a01f54 c0a01f58 c0a01f48 c0103524 c0103528 60000013 ffffffff [<c010752c>] (__irq_svc) from [<c0103528>] (arch_cpu_idle+0x48/0x4c) [<c0103528>] (arch_cpu_idle) from [<c0681390>] (default_idle_call+0x30/0x3c) [<c0681390>] (default_idle_call) from [<c0156f24>] (do_idle+0xc8/0x134) [<c0156f24>] (do_idle) from [<c015722c>] (cpu_startup_entry+0x28/0x2c) [<c015722c>] (cpu_startup_entry) from [<c067ad74>] (rest_init+0x84/0x88) [<c067ad74>] (rest_init) from [<c0900d44>] (start_kernel+0x388/0x394) [<c0900d44>] (start_kernel) from [<0000807c>] (0x807c) handlers: [<c041c5dc>] npcm7xx_kcs_irq Disabling IRQ #30 It needs to change the returned status from -ENODEV to 0. The -ENODEV was originally used to tell the low level IRQ handler that no user was running, but not consider the IRQ handling desgin. And multiple KCS channels share one IRQ handler, it needs to check the IBF flag before doing force abort. If the IBF is set, after handling, return 0 to low level IRQ handler to indicate that the IRQ is handled. Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
| * | | | | ipmi: Cleanup oops on initialization failureCorey Minyard2018-06-251-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 93c303d2045b3 "ipmi_si: Clean up shutdown a bit" didn't copy the behavior of the cleanup in one spot, it needed to check for a non-NULL interface before cleaning it up. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Meelis Roos <mroos@linux.ee>
* | | | | | Merge tag 'scsi-fixes' of ↵Linus Torvalds2018-07-073-15/+57
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is two minor bug fixes (aacraid, target) and a fix for a potential exploit in the way sg handles teardown" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: mitigate read/write abuse scsi: aacraid: Fix PD performance regression over incorrect qd being set scsi: target: Fix truncated PR-in ReadKeys response
| * | | | | | scsi: sg: mitigate read/write abuseJann Horn2018-06-261-2/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As Al Viro noted in commit 128394eff343 ("sg_write()/bsg_write() is not fit to be called under KERNEL_DS"), sg improperly accesses userspace memory outside the provided buffer, permitting kernel memory corruption via splice(). But it doesn't just do it on ->write(), also on ->read(). As a band-aid, make sure that the ->read() and ->write() handlers can not be called in weird contexts (kernel context or credentials different from file opener), like for ib_safe_file_access(). If someone needs to use these interfaces from different security contexts, a new interface should be written that goes through the ->ioctl() handler. I've mostly copypasted ib_safe_file_access() over as sg_safe_file_access() because I couldn't find a good common header - please tell me if you know a better way. [mkp: s/_safe_/_check_/] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: aacraid: Fix PD performance regression over incorrect qd being setRaghava Aditya Renukunta2018-06-261-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver fails to set the correct queue depth for native devices, due to failing to set the device type prior to calling aac_set_safw_target_qd(). This results in slave configure setting the queue depth to 1. This causes around 30% performance degradation. Fixed by setting the dev type before trying to set queue depth. Reported-by: Steve Best <sbest@redhat.com> Fixes: 0bcb45fb20c21 ("scsi: aacraid: Add helper function to set queue depth") cc: stable@vger.kernel.org Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: target: Fix truncated PR-in ReadKeys responseDavid Disseldorp2018-06-201-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPC5r17 states that the contents of the ADDITIONAL LENGTH field are not altered based on the allocation length, so always calculate and pack the full key list length even if the list itself is truncated. According to Maged: Yes it fixes the "Storage Spaces Persistent Reservation" test in the Windows 2016 Server Failover Cluster validation suites when having many connections that result in more than 8 registrations. I tested your patch on 4.17 with iblock. This behaviour can be tested using the libiscsi PrinReadKeys.Truncate test. Cc: stable@vger.kernel.org Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Tested-by: Maged Mokhtar <mmokhtar@petasan.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | | | | | | Merge tag 'for-linus-20180706' of git://git.kernel.dk/linux-blockLinus Torvalds2018-07-072-1/+2
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block fixes from Jens Axboe: "Two minor fixes for this series: - add LOOP_SET_BLOCK_SIZE as compat ioctl (Evan Green) - drbd use-after-free fix (Lars Ellenberg)" * tag 'for-linus-20180706' of git://git.kernel.dk/linux-block: loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl drbd: fix access after free
| * | | | | | | loop: Add LOOP_SET_BLOCK_SIZE in compat ioctlEvan Green2018-07-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change adds LOOP_SET_BLOCK_SIZE as one of the supported ioctls in lo_compat_ioctl. It only takes an unsigned long argument, and in practice a 32-bit value works fine. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * | | | | | | drbd: fix access after freeLars Ellenberg2018-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have struct drbd_requests { ... struct bio *private_bio; ... } to hold a bio clone for local submission. On local IO completion, we put that bio, and in case we want to use the result later, we overload that member to hold the ERR_PTR() of the completion result, Which, before v4.3, used to be the passed in "int error", so we could first bio_put(), then assign. v4.3-rc1~100^2~21 4246a0b63bd8 block: add a bi_error field to struct bio changed that: bio_put(req->private_bio); - req->private_bio = ERR_PTR(error); + req->private_bio = ERR_PTR(bio->bi_error); Which introduces an access after free, because it was non obvious that req->private_bio == bio. Impact of that was mostly unnoticable, because we only use that value in a multiple-failure case, and even then map any "unexpected" error code to EIO, so worst case we could potentially mask a more specific error with EIO in a multiple failure case. Unless the pointed to memory region was unmapped, as is the case with CONFIG_DEBUG_PAGEALLOC, in which case this results in BUG: unable to handle kernel paging request v4.13-rc1~70^2~75 4e4cbee93d56 block: switch bios to blk_status_t changes it further to bio_put(req->private_bio); req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status)); And blk_status_to_errno() now contains a WARN_ON_ONCE() for unexpected values, which catches this "sometimes", if the memory has been reused quickly enough for other things. Should also go into stable since 4.3, with the trivial change around 4.13. Cc: stable@vger.kernel.org Fixes: 4246a0b63bd8 block: add a bi_error field to struct bio Reported-by: Sarah Newman <srn@prgmr.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | | | | | | | Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2018-07-064-27/+18
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "The usual collection of driver fixlets: - build cleanup/fix for the sunxi makefile that tried to save size but failed and prevented dead code elimination from working - two Davinci clk driver fixes for a typo causing build failures in different configurations and an error check that checks the wrong variable. - undo the DT ABI breaking imx6ul binding header shuffle that got merged this cycle" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: dt-bindings: clock: imx6ul: Do not change the clock definition order clk: davinci: fix a typo (which leads to build failures) clk: davinci: cfgchip: testing the wrong variable clk: sunxi-ng: replace lib-y with obj-y
| * \ \ \ \ \ \ \ Merge tag 'clk-davinci-fixes-4.18' of https://github.com/dlech/linux into ↵Stephen Boyd2018-06-272-2/+2
| |\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk-fixes Pull davinci clk fixes for 4.18 from David Lechner: Here are a couple of typo fixes for clk-davinci for 4.18. * tag 'clk-davinci-fixes-4.18' of https://github.com/dlech/linux: clk: davinci: fix a typo (which leads to build failures) clk: davinci: cfgchip: testing the wrong variable
| | * | | | | | | | clk: davinci: fix a typo (which leads to build failures)Bartosz Golaszewski2018-06-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This should have been DM365, not DM356. Fixes: 4eff0bebf4ed5 ("clk: davinci: Fix link errors when not all SoCs are enabled") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David Lechner <david@lechnology.com>
| | * | | | | | | | clk: davinci: cfgchip: testing the wrong variableDan Carpenter2018-06-261-1/+1
| | | |_|_|/ / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a copy and paste bug here. We should be testing "usb1" instead of "usb0". Fixes: 58e1e2d2cd89 ("clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Lechner <david@lechnology.com>
| * / | | | | | | clk: sunxi-ng: replace lib-y with obj-yMasahiro Yamada2018-06-212-25/+16
| |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We had commit 06e226c7fb23 ("clk: sunxi-ng: Move all clock types to a library") and commit 799c43415442 ("kbuild: thin archives make default for all archs") in the same development cycle, from different trees. With migration to the thin archive, the entire drivers/clk/sunxi-ng/lib.a is linked to the vmlinux. This does not break build, but we do not get any size saving. However, we do not need to go back to the individual Kconfig options. The default configuration pulls in all (or most) of the CCU parts anyway. Also, once we enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, we can simply list all files with obj-y, and the linker will drop all unused functions by itself. After the long discussion [1], people there agreed to fix this, but nobody sent a patch after all. I am doing it now. I lifted up CONFIG_SUNXI_CCU to drivers/clk/Makefile because everything in drivers/clk/sunxi-ng/ depends on SUNXI_CCU. [1] https://patchwork.kernel.org/patch/9796521/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | | | | | | | Merge tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds2018-07-062-11/+17
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull VFIO fixes from Alex Williamson: - Make vfio-pci IGD extensions optional via Kconfig (Alex Williamson) - Remove unused and soon to be removed map_atomic callback from mbochs sample driver, add unmap callback to avoid dmabuf leaks (Gerd Hoffmann) - Fix usage of get_user_pages_longterm() (Jason Gunthorpe) - Fix sample mbochs driver vm_operations_struct.fault return type (Souptick Joarder) * tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfio: sample/vfio-mdev: Change return type to vm_fault_t vfio: Use get_user_pages_longterm correctly sample/mdev/mbochs: add mbochs_kunmap_dmabuf sample/mdev/mbochs: remove mbochs_kmap_atomic_dmabuf vfio/pci: Make IGD support a configurable option
| * | | | | | | | vfio: Use get_user_pages_longterm correctlyJason Gunthorpe2018-06-301-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch noted in the fixes below converted get_user_pages_fast() to get_user_pages_longterm(), however the two calls differ in a few ways. First _fast() is documented to not require the mmap_sem, while _longterm() is documented to need it. Hold the mmap sem as required. Second, _fast accepts an 'int write' while _longterm uses 'unsigned int gup_flags', so the expression '!!(prot & IOMMU_WRITE)' is only working by luck as FOLL_WRITE is currently == 0x1. Use the expected FOLL_WRITE constant instead. Fixes: 94db151dc892 ("vfio: disable filesystem-dax page pinning") Cc: <stable@vger.kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
| * | | | | | | | vfio/pci: Make IGD support a configurable optionAlex Williamson2018-06-191-2/+10
| |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the code which provides extensions to support direct assignment of Intel IGD (GVT-d) to be compiled out of the kernel if desired. The config option for this was previously automatically enabled on X86, therefore the default remains Y. This simply provides the option to disable it even for X86. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* | | | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2018-07-062-10/+11
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A few more changes for v4.18: - wire up the two new system calls io_pgetevents and rseq - fix a register corruption in the expolines code for machines without EXRL - drastically reduce the memory utilization of the dasd driver - fix reference counting for KVM page table pages" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up rseq system call s390: wire up io_pgetevents system call s390/mm: fix refcount usage for 4K pgste s390/dasd: reduce the default queue depth and nr of hardware queues s390: Correct register corruption in critical section cleanup
| * | | | | | | | s390/dasd: reduce the default queue depth and nr of hardware queuesStefan Haberland2018-07-022-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the default values for the number of hardware queues and queue depth to significantly reduce the memory footprint of a DASD device. The memory consumption per DASD device reduces from approximately 40MB to approximately 1.5MB. This is necessary to build systems with a large number of DASD devices and a reasonable amount of memory. Performance measurements showed that good performance results are possible with the new default values even on systems with lots of CPUs and lots of alias devices. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | | | | | | Merge tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2018-07-0634-242/+583
|\ \ \ \ \ \ \ \ \ | |_|_|_|_|_|/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "This is the drm fixes for rc4. It's a bit larger than I'd like but the exynos cleanups are pretty mechanical, and I'd rather have them in sooner rather than later so we can avoid too much conflicts around them. The non-mechanincal exynos changes are mostly fixes for new feature recently introduced. Apart from the exynos updates, we have: i915: - GVT and GGTT mapping fixes amdgpu: - fix HDMI2.0 4K@60 Hz regression - Hotplug fixes for dual-GPU laptops to make power management better - misc vega12 bios fixes, a race fix and some typos. sii8620 bridge: - small fixes around mode setting core: - use kvzalloc to allocate blob property memory" * tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/amd/display: add a check for display depth validity drm/amd/display: adding ycbcr420 pixel encoding for hdmi drm/udl: fix display corruption of the last line drm/bridge/sii8620: Fix link mode selection drm/bridge/sii8620: Fix display of packed pixel modes drm/bridge/sii8620: Send AVI infoframe in all MHL versions drm/amdgpu: fix user fence write race condition drm/i915: Try GGTT mmapping whole object as partial drm/amdgpu/pm: fix display count in non-DC path drm/amdgpu: fix swapped emit_ib_size in vce3 drm: Use kvzalloc for allocating blob property memory drm/i915/gvt: changed DDI mode emulation type drm/i915/gvt: fix a bug of partially write ggtt enties drm/exynos: Replace drm_dev_unref with drm_dev_put drm/exynos: Replace drm_gem_object_unreference_unlocked with put function drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functions drm/exynos: ipp: use correct enum type drm/exynos: decon5433: Fix WINCONx reset value drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes drm/exynos: fimc: Use real buffer width for configuring the hardware ...
| * | | | | | | | Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of ↵Dave Airlie2018-07-0611-102/+149
| |\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Fixups - Fix several problems to IPPv2 merged to mainline recentely. . An align problem of width size that IPP driver incorrectly calculated the real buffer size. . Horizontal and vertical flip problem. . Per-plane global alpha for XRGB modes. . Incorrect variant of the YUV modes. - Fix plane overlapping problem. . The stange order of overlapping planes on XRGB modes by setting global alpha value to maximum value. Cleanup - Rename a enum type, drm_ipp_size_id, to one specific to Exynos, drm_exynos_ipp_limit_type. - Replace {un/reference} with {put,get} functions. . it replaces several reference/unreference functions with Linux kernel nameing standard. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530512041-21392-1-git-send-email-inki.dae@samsung.com
| | * | | | | | | | drm/exynos: Replace drm_dev_unref with drm_dev_putThomas Zimmermann2018-07-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>