summaryrefslogtreecommitdiffstats
path: root/fs/cifs/xattr.c (unfollow)
Commit message (Collapse)AuthorFilesLines
2014-01-02epoll: do not take the nested ep->mtx on EPOLL_CTL_DELJason Baron1-4/+0
The EPOLL_CTL_DEL path of epoll contains a classic, ab-ba deadlock. That is, epoll_ctl(a, EPOLL_CTL_DEL, b, x), will deadlock with epoll_ctl(b, EPOLL_CTL_DEL, a, x). The deadlock was introduced with commmit 67347fe4e632 ("epoll: do not take global 'epmutex' for simple topologies"). The acquistion of the ep->mtx for the destination 'ep' was added such that a concurrent EPOLL_CTL_ADD operation would see the correct state of the ep (Specifically, the check for '!list_empty(&f.file->f_ep_links') However, by simply not acquiring the lock, we do not serialize behind the ep->mtx from the add path, and thus may perform a full path check when if we had waited a little longer it may not have been necessary. However, this is a transient state, and performing the full loop checking in this case is not harmful. The important point is that we wouldn't miss doing the full loop checking when required, since EPOLL_CTL_ADD always locks any 'ep's that its operating upon. The reason we don't need to do lock ordering in the add path, is that we are already are holding the global 'epmutex' whenever we do the double lock. Further, the original posting of this patch, which was tested for the intended performance gains, did not perform this additional locking. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Nelson Elhage <nelhage@nelhage.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to ↵Nobuhiro Iwamatsu1-0/+5
sh_ksyms_32.c Min_low_pfn and max_low_pfn were used in pfn_valid macro if defined CONFIG_FLATMEM. When the functions that use the pfn_valid is used in driver module, max_low_pfn and min_low_pfn is to undefined, and fail to build. ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined! ERROR: "max_low_pfn" [drivers/block/aoe/aoe.ko] undefined! make[2]: *** [__modpost] Error 1 make[1]: *** [modules] Error 2 This patch fix this problem. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test()Jiang Liu1-1/+10
Check DMA mapping return values in function ioat_dma_self_test() to get rid of following warning message. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0() ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single] Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8 Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.1311181644 11/18/2013 Call Trace: dump_stack+0x4d/0x66 warn_slowpath_common+0x7d/0xa0 warn_slowpath_fmt+0x4c/0x50 check_unmap+0x4c0/0x9a0 debug_dma_unmap_page+0x81/0x90 ioat_dma_self_test+0x3d2/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] ioat_pci_probe+0x122/0x1b0 [ioatdma] local_pci_probe+0x45/0xa0 pci_device_probe+0xd9/0x130 driver_probe_device+0x171/0x490 __driver_attach+0x93/0xa0 bus_for_each_dev+0x6b/0xb0 driver_attach+0x1e/0x20 bus_add_driver+0x1f8/0x2b0 driver_register+0x81/0x110 __pci_register_driver+0x60/0x70 ioat_init_module+0x89/0x1000 [ioatdma] do_one_initcall+0xe2/0x250 load_module+0x2313/0x2a00 SyS_init_module+0xd9/0x130 system_call_fastpath+0x1a/0x1f ---[ end trace 990c591681d27c31 ]--- Mapped at: debug_dma_map_page+0xbe/0x180 ioat_dma_self_test+0x1ab/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02mm/memory-failure.c: transfer page count from head page to tail page after ↵Naoya Horiguchi1-0/+10
split thp Memory failures on thp tail pages cause kernel panic like below: mce: [Hardware Error]: Machine check events logged MCE exception done on CPU 7 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff811b7cd1>] dequeue_hwpoisoned_huge_page+0x131/0x1e0 PGD bae42067 PUD ba47d067 PMD 0 Oops: 0000 [#1] SMP ... CPU: 7 PID: 128 Comm: kworker/7:2 Tainted: G M O 3.13.0-rc4-131217-1558-00003-g83b7df08e462 #25 ... Call Trace: me_huge_page+0x3e/0x50 memory_failure+0x4bb/0xc20 mce_process_work+0x3e/0x70 process_one_work+0x171/0x420 worker_thread+0x11b/0x3a0 ? manage_workers.isra.25+0x2b0/0x2b0 kthread+0xe4/0x100 ? kthread_create_on_node+0x190/0x190 ret_from_fork+0x7c/0xb0 ? kthread_create_on_node+0x190/0x190 ... RIP dequeue_hwpoisoned_huge_page+0x131/0x1e0 CR2: 0000000000000058 The reasoning of this problem is shown below: - when we have a memory error on a thp tail page, the memory error handler grabs a refcount of the head page to keep the thp under us. - Before unmapping the error page from processes, we split the thp, where page refcounts of both of head/tail pages don't change. - Then we call try_to_unmap() over the error page (which was a tail page before). We didn't pin the error page to handle the memory error, this error page is freed and removed from LRU list. - We never have the error page on LRU list, so the first page state check returns "unknown page," then we move to the second check with the saved page flag. - The saved page flag have PG_tail set, so the second page state check returns "hugepage." - We call me_huge_page() for freed error page, then we hit the above panic. The root cause is that we didn't move refcount from the head page to the tail page after split thp. So this patch suggests to do this. This panic was introduced by commit 524fca1e73 ("HWPOISON: fix misjudgement of page_action() for errors on mlocked pages"). Note that we did have the same refcount problem before this commit, but it was just ignored because we had only first page state check which returned "unknown page." The commit changed the refcount problem from "doesn't work" to "kernel panic." Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02MAINTAINERS: set up proper record for Xilinx ZynqMichal Simek1-0/+3
Setup correct zynq entry. - Add missing cadence_ttc_timer maintainership - Add zynq wildcard - Add xilinx wildcard Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02mm: remove bogus warning in copy_huge_pmd()Mel Gorman1-3/+0
Sasha Levin reported the following warning being triggered WARNING: CPU: 28 PID: 35287 at mm/huge_memory.c:887 copy_huge_pmd+0x145/ 0x3a0() Call Trace: copy_huge_pmd+0x145/0x3a0 copy_page_range+0x3f2/0x560 dup_mmap+0x2c9/0x3d0 dup_mm+0xad/0x150 copy_process+0xa68/0x12e0 do_fork+0x96/0x270 SyS_clone+0x16/0x20 stub_clone+0x69/0x90 This warning was introduced by "mm: numa: Avoid unnecessary disruption of NUMA hinting during migration" for paranoia reasons but the warning is bogus. I was thinking of parallel races between NUMA hinting faults and forks but this warning would also be triggered by a parallel reclaim splitting a THP during a fork. Remote the bogus warning. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02memcg: fix memcg_size() calculationVladimir Davydov1-1/+1
The mem_cgroup structure contains nr_node_ids pointers to mem_cgroup_per_node objects, not the objects themselves. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02mm: fix use-after-free in sys_remap_file_pagesRik van Riel1-3/+5
remap_file_pages calls mmap_region, which may merge the VMA with other existing VMAs, and free "vma". This can lead to a use-after-free bug. Avoid the bug by remembering vm_flags before calling mmap_region, and not trying to dereference vma later. Signed-off-by: Rik van Riel <riel@redhat.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Kees Cook <keescook@chromium.org> Cc: Michel Lespinasse <walken@google.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02mm: munlock: fix deadlock in __munlock_pagevec()Vlastimil Babka1-5/+10
Commit 7225522bb429 ("mm: munlock: batch non-THP page isolation and munlock+putback using pagevec" introduced __munlock_pagevec() to speed up munlock by holding lru_lock over multiple isolated pages. Pages that fail to be isolated are put_page()d immediately, also within the lock. This can lead to deadlock when __munlock_pagevec() becomes the holder of the last page pin and put_page() leads to __page_cache_release() which also locks lru_lock. The deadlock has been observed by Sasha Levin using trinity. This patch avoids the deadlock by deferring put_page() operations until lru_lock is released. Another pagevec (which is also used by later phases of the function is reused to gather the pages for put_page() operation. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michel Lespinasse <walken@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02mm: munlock: fix a bug where THP tail page is encounteredVlastimil Babka1-7/+22
Since commit ff6a6da60b89 ("mm: accelerate munlock() treatment of THP pages") munlock skips tail pages of a munlocked THP page. However, when the head page already has PageMlocked unset, it will not skip the tail pages. Commit 7225522bb429 ("mm: munlock: batch non-THP page isolation and munlock+putback using pagevec") has added a PageTransHuge() check which contains VM_BUG_ON(PageTail(page)). Sasha Levin found this triggered using trinity, on the first tail page of a THP page without PageMlocked flag. This patch fixes the issue by skipping tail pages also in the case when PageMlocked flag is unset. There is still a possibility of race with THP page split between clearing PageMlocked and determining how many pages to skip. The race might result in former tail pages not being skipped, which is however no longer a bug, as during the skip the PageTail flags are cleared. However this race also affects correctness of NR_MLOCK accounting, which is to be fixed in a separate patch. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michel Lespinasse <walken@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02KVM: nVMX: Unconditionally uninit the MMU on nested vmexitJan Kiszka1-2/+1
Three reasons for doing this: 1. arch.walk_mmu points to arch.mmu anyway in case nested EPT wasn't in use. 2. this aligns VMX with SVM. But 3. is most important: nested_cpu_has_ept(vmcs12) queries the VMCS page, and if one guest VCPU manipulates the page of another VCPU in L2, we may be fooled to skip over the nested_ept_uninit_mmu_context, leaving mmu in nested state. That can crash the host later on if nested_ept_get_cr3 is invoked while L1 already left vmxon and nested.current_vmcs12 became NULL therefore. Cc: stable@kernel.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-01-02GFS2: Fix unsafe dereference in dump_holder()Tetsuo Handa1-0/+2
GLOCK_BUG_ON() might call this function without RCU read lock. Make sure that RCU read lock is held when using task_struct returned from pid_task(). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-01-01crypto: ixp4xx - Fix kernel compile errorKrzysztof Hałasa1-3/+1
drivers/crypto/ixp4xx_crypto.c: In function 'ixp_module_init': drivers/crypto/ixp4xx_crypto.c:1419:2: error: 'dev' undeclared (first use in this function) Now builds. Not tested on real hw. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-12-31Input: allocate absinfo data when setting ABS capabilityDmitry Torokhov1-0/+4
We need to make sure we allocate absinfo data when we are setting one of EV_ABS/ABS_XXX capabilities, otherwise we may bomb when we try to emit this event. Rested-by: Paul Cercueil <pcercuei@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-31ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplugRafael J. Wysocki5-8/+64
The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made during the 3.12 development cycle uncovered a problem with VGA switcheroo that on some systems, when the device-specific method (ATPX in the radeon case, _DSM in the nouveau case) is used to turn off the discrete graphics, the BIOS generates ACPI hotplug events for that device and those events cause ACPIPHP to attempt to remove the device from the system (they are events for a device that was present previously and is not present any more, so that's what should be done according to the spec). Then, the system stops functioning correctly. Since the hotplug events in question were simply silently ignored previously, the least intrusive way to address that problem is to make ACPIPHP ignore them again. For this purpose, introduce a new ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug events for PCI devices whose ACPI companions have that flag set. Next, make the radeon and nouveau switcheroo detection code set the no_hotplug flag for the discrete graphics' ACPI companion. Fixes: bbd34fcdd1b2 (ACPI / hotplug / PCI: Register all devices under the given bridge) References: https://bugzilla.kernel.org/show_bug.cgi?id=61891 References: https://bugzilla.kernel.org/show_bug.cgi?id=64891 Reported-and-tested-by: Mike Lothian <mike@fireburn.co.uk> Reported-and-tested-by: <madcatx@atlas.cz> Reported-and-tested-by: Joaquín Aramendía <samsagax@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
2013-12-31intel_pstate: Fail initialization if P-state information is missingRafael J. Wysocki1-0/+5
If pstate.current_pstate is 0 after the initial intel_pstate_get_cpu_pstates(), this means that we were unable to obtain any useful P-state information and there is no reason to continue, so free memory and return an error in that case. This fixes the following divide error occuring in a nested KVM guest: Intel P-state driver initializing. Intel pstate controlling: cpu 0 cpufreq: __cpufreq_add_dev: ->get() failed divide error: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-0.rc4.git5.1.fc21.x86_64 #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88001ea20000 ti: ffff88001e9bc000 task.ti: ffff88001e9bc000 RIP: 0010:[<ffffffff815c551d>] [<ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0 RSP: 0000:ffff88001ee03e18 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88001a454348 RCX: 0000000000006100 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001ee03e38 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88001ea20000 R11: 0000000000000000 R12: 00000c0a1ea20000 R13: 1ea200001ea20000 R14: ffffffff815c5400 R15: ffff88001a454348 FS: 0000000000000000(0000) GS:ffff88001ee00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001c0c000 CR4: 00000000000006f0 Stack: fffffffb1a454390 ffffffff821a4500 ffff88001a454390 0000000000000100 ffff88001ee03ea8 ffffffff81083e9a ffffffff81083e15 ffffffff82d5ed40 ffffffff8258cc60 0000000000000000 ffffffff81ac39de 0000000000000000 Call Trace: <IRQ> [<ffffffff81083e9a>] call_timer_fn+0x8a/0x310 [<ffffffff81083e15>] ? call_timer_fn+0x5/0x310 [<ffffffff815c5400>] ? pid_param_set+0x130/0x130 [<ffffffff81084354>] run_timer_softirq+0x234/0x380 [<ffffffff8107aee4>] __do_softirq+0x104/0x430 [<ffffffff8107b5fd>] irq_exit+0xcd/0xe0 [<ffffffff81770645>] smp_apic_timer_interrupt+0x45/0x60 [<ffffffff8176efb2>] apic_timer_interrupt+0x72/0x80 <EOI> [<ffffffff810e15cd>] ? vprintk_emit+0x1dd/0x5e0 [<ffffffff81757719>] printk+0x67/0x69 [<ffffffff815c1493>] __cpufreq_add_dev.isra.13+0x883/0x8d0 [<ffffffff815c14f0>] cpufreq_add_dev+0x10/0x20 [<ffffffff814a14d1>] subsys_interface_register+0xb1/0xf0 [<ffffffff815bf5cf>] cpufreq_register_driver+0x9f/0x210 [<ffffffff81fb19af>] intel_pstate_init+0x27d/0x3be [<ffffffff81761e3e>] ? mutex_unlock+0xe/0x10 [<ffffffff81fb1732>] ? cpufreq_gov_dbs_init+0x12/0x12 [<ffffffff8100214a>] do_one_initcall+0xfa/0x1b0 [<ffffffff8109dbf5>] ? parse_args+0x225/0x3f0 [<ffffffff81f64193>] kernel_init_freeable+0x1fc/0x287 [<ffffffff81f638d0>] ? do_early_param+0x88/0x88 [<ffffffff8174b530>] ? rest_init+0x150/0x150 [<ffffffff8174b53e>] kernel_init+0xe/0x130 [<ffffffff8176e27c>] ret_from_fork+0x7c/0xb0 [<ffffffff8174b530>] ? rest_init+0x150/0x150 Code: c1 e0 05 48 63 bc 03 10 01 00 00 48 63 83 d0 00 00 00 48 63 d6 48 c1 e2 08 c1 e1 08 4c 63 c2 48 c1 e0 08 48 98 48 c1 e0 08 48 99 <49> f7 f8 48 98 48 0f af f8 48 c1 ff 08 29 f9 89 ca c1 fa 1f 89 RIP [<ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0 RSP <ffff88001ee03e18> ---[ end trace f166110ed22cc37a ]--- Kernel panic - not syncing: Fatal exception in interrupt Reported-and-tested-by: Kashyap Chamarthy <kchamart@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: All applicable <stable@vger.kernel.org>
2013-12-30KVM: x86: Fix APIC map calculation after re-enablingJan Kiszka1-4/+4
Update arch.apic_base before triggering recalculate_apic_map. Otherwise the recalculation will work against the previous state of the APIC and will fail to build the correct map when an APIC is hardware-enabled again. This fixes a regression of 1e08ec4a13. Cc: stable@vger.kernel.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-12-30MAINTAINERS: Update Rob Herring's email addressRob Herring1-3/+3
My Calxeda email address is going away. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Rob Herring <robh@kernel.org>
2013-12-30of/irq: Fix device_node refcount in of_irq_parse_raw()Cédric Le Goater1-4/+1
Commit 2361613206e6, "of/irq: Refactor interrupt-map parsing" changed the refcount on the device_node causing an error in of_node_put(): ERROR: Bad of_node_put() on /pci@800000020000000 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-dirty #2 Call Trace: [c00000003e403500] [c0000000000144fc] .show_stack+0x7c/0x1f0 (unreliable) [c00000003e4035d0] [c00000000070f250] .dump_stack+0x88/0xb4 [c00000003e403650] [c0000000005e8768] .of_node_release+0xd8/0xf0 [c00000003e4036e0] [c0000000005eeafc] .of_irq_parse_one+0x10c/0x280 [c00000003e4037a0] [c0000000005efd4c] .of_irq_parse_pci+0x3c/0x1d0 [c00000003e403840] [c000000000038240] .pcibios_setup_device+0xa0/0x2e0 [c00000003e403910] [c0000000000398f0] .pcibios_setup_bus_devices+0x60/0xd0 [c00000003e403990] [c00000000003b3a4] .__of_scan_bus+0x1a4/0x2b0 [c00000003e403a80] [c00000000003a62c] .pcibios_scan_phb+0x30c/0x410 [c00000003e403b60] [c0000000009fe430] .pcibios_init+0x7c/0xd4 This patch adjusts the refcount in the walk of the interrupt tree. When a match is found, there is no need to increase the refcount on 'out_irq->np' as 'newpar' is already holding a ref. The refcount balance between 'ipar' and 'newpar' is maintained in the skiplevel: goto label. This patch also removes the usage of the device_node variable 'old' which seems useless after the latest changes. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2013-12-30of/Kconfig: Spelling s/one/once/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Rob Herring <robh@kernel.org>
2013-12-30Revert "of/address: Handle #address-cells > 2 specially"Rob Herring1-8/+0
This reverts commit e38c0a1fbc5803cbacdaac0557c70ac8ca5152e7. Nikita Yushchenko reports: While trying to make freescale p2020ds and mpc8572ds boards working with mainline kernel, I faced that commit e38c0a1f (Handle Both these boards have uli1575 chip. Corresponding part in device tree is something like uli1575@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; isa@1e { ... I.e. it has #address-cells = <3> With commit e38c0a1f reverted, devices under uli1575 are registered correctly, e.g. for rtc OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 ** OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e OF: translating address: 00000001 00000070 OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0 OF: walking ranges... OF: ISA map, cp=0, s=1000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 00000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0 OF: walking ranges... OF: default map, cp=a0000000, s=20000000, da=70 OF: default map, cp=0, s=10000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 01000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000 OF: walking ranges... OF: PCI map, cp=0, s=10000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 01000000 00000000 00000070 OF: parent bus is default (na=2, ns=2) on / OF: walking ranges... OF: PCI map, cp=0, s=10000, da=70 OF: parent translation for: 00000000 ffc10000 OF: with offset: 70 OF: one level translation: 00000000 ffc10070 OF: reached root node With commit e38c0a1f in place, address translation fails: OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 ** OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e OF: translating address: 00000001 00000070 OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0 OF: walking ranges... OF: ISA map, cp=0, s=1000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 00000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0 OF: walking ranges... OF: default map, cp=a0000000, s=20000000, da=70 OF: default map, cp=0, s=10000, da=70 OF: not found ! Thierry Reding confirmed this commit was not needed after all: "We ended up merging a different address representation for Tegra PCIe and I've confirmed that reverting this commit doesn't cause any obvious regressions. I think all other drivers in drivers/pci/host ended up copying what we did on Tegra, so I wouldn't expect any other breakage either." There doesn't appear to be a simple way to support both behaviours, so reverting this as nothing should be depending on the new behaviour. Cc: stable@vger.kernel.org # v3.7+ Signed-off-by: Rob Herring <robh@kernel.org>
2013-12-30ARM/cpuidle: remove __init tag from Calxeda cpuidle probe functionAndre Przywara1-1/+1
Commit 60a66e370007e8535b7a561353b07b37deaf35ba changed the Calxeda cpuidle driver to a platform driver, copying the __init tag from the _init() to the newly used _probe() function. However, "probe should not be __init." (Rob said ;-) Remove the __init tag to fix a section mismatch in the Calxeda cpuidle driver. Signed-off-by: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-30s390/pci: obtain function handle in hotplug notifierSebastian Ott1-0/+2
When using the CLP interface to enable or disable a pci device a valid function handle needs to be delivered. So far our assumption was that we always have an up-to-date version of the function handle (since it doesn't change when the device is in use). This assumption is incorrect if the pci device is enabled or disabled outside of our control. When we are notified about such a change we already receive the new function handle. Just use it. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-30stmmac: Fix incorrect spinlock release and PTP cap detection.Vince Bridgers2-13/+11
This patch corrects a problem in stmmac_ptp.c, functions stmmac_adjust_time and stmmac_adjust_freq where the incorrect spinlocks were released. This patch also addresses a problem in stmmac_main, function stmmac_init_ptp where the capability detection for advanced timestamping was masked by message masking. This patch was touch tested using linuxptp, and runs without the previously observed instabilities. More extensive testing is ongoing. Vince Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-30phy: IRQ cannot be sharedSergei Shtylyov1-4/+2
With the way PHY IRQ handler is implemented (all real handling being pushed to the workqueue and returning IRQ_HANDLED all the time PHY is active), we cannot really claim that PHY IRQ can be shared when calling request_irq(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-30net: rose: restore old recvmsg behaviorFlorian Westphal1-12/+4
recvmsg handler in net/rose/af_rose.c performs size-check ->msg_namelen. After commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c (net: rework recvmsg handler msg_name and msg_namelen logic), we now always take the else branch due to namelen being initialized to 0. Digging in netdev-vger-cvs git repo shows that msg_namelen was initialized with a fixed-size since at least 1995, so the else branch was never taken. Compile tested only. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-30xen-netback: fix guest-receive-side array sizesPaul Durrant3-7/+24
The sizes chosen for the metadata and grant_copy_op arrays on the guest receive size are wrong; - The meta array is needlessly twice the ring size, when we only ever consume a single array element per RX ring slot - The grant_copy_op array is way too small. It's sized based on a bogus assumption: that at most two copy ops will be used per ring slot. This may have been true at some point in the past but it's clear from looking at start_new_rx_buffer() that a new ring slot is only consumed if a frag would overflow the current slot (plus some other conditions) so the actual limit is MAX_SKB_FRAGS grant_copy_ops per ring slot. This patch fixes those two sizing issues and, because grant_copy_ops grows so much, it pulls it out into a separate chunk of vmalloc()ed memory. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-30fec: Do not assume that PHY reset is active lowFabio Estevam1-4/+10
We should not assume that the PHY reset is always active low. Retrieve this information from the device tree instead, so that the PHY reset can work on both cases. Reported-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-30tipc: fix deadlock during socket releaseYing Xue3-48/+49
A deadlock might occur if name table is withdrawn in socket release routine, and while packets are still being received from bearer. CPU0 CPU1 T0: recv_msg() release() T1: tipc_recv_msg() tipc_withdraw() T2: [grab node lock] [grab port lock] T3: tipc_link_wakeup_ports() tipc_nametbl_withdraw() T4: [grab port lock]* named_cluster_distribute() T5: wakeupdispatch() tipc_link_send() T6: [grab node lock]* The opposite order of holding port lock and node lock on above two different paths may result in a deadlock. If socket lock instead of port lock is used to protect port instance in tipc_withdraw(), the reverse order of holding port lock and node lock will be eliminated, as a result, the deadlock is killed as well. Reported-by: Lars Everbrand <lars.everbrand@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-30powerpc: Fix alignment of secondary cpu spin varsOlof Johansson1-0/+1
Commit 5c0484e25ec0 ('powerpc: Endian safe trampoline') resulted in losing proper alignment of the spinlock variables used when booting secondary CPUs, causing some quite odd issues with failing to boot on PA Semi-based systems. This showed itself on ppc64_defconfig, but not on pasemi_defconfig, so it had gone unnoticed when I initially tested the LE patch set. Fix is to add explicit alignment instead of relying on good luck. :) [ It appears that there is a different issue with PA Semi systems however this fix is definitely correct so applying anyway -- BenH ] Fixes: 5c0484e25ec0 ('powerpc: Endian safe trampoline') Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67811 Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powerpc: Align p_endAnton Blanchard1-0/+1
p_end is an 8 byte value embedded in the text section. This means it is only 4 byte aligned when it should be 8 byte aligned. Fix this by adding an explicit alignment. This fixes an issue where POWER7 little endian builds with CONFIG_RELOCATABLE=y fail to boot. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powernv/eeh: Add buffer for P7IOC hub error dataBrian W Hart2-14/+5
Prevent ioda_eeh_hub_diag() from clobbering itself when called by supplying a per-PHB buffer for P7IOC hub diagnostic data. Take care to inform OPAL of the correct size for the buffer. [Small style change to the use of sizeof -- BenH] Signed-off-by: Brian W Hart <hartb@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag()Brian W Hart1-2/+3
PHB diagnostic buffer may be smaller than PAGE_SIZE, especially when PAGE_SIZE > 4KB. Signed-off-by: Brian W Hart <hartb@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endianPaul E. McKenney1-15/+38
The powerpc 64-bit __copy_tofrom_user() function uses shifts to handle unaligned invocations. However, these shifts were designed for big-endian systems: On little-endian systems, they must shift in the opposite direction. This commit relies on the C preprocessor to insert the correct shifts into the assembly code. [ This is a rare but nasty LE issue. Most of the time we use the POWER7 optimised __copy_tofrom_user_power7 loop, but when it hits an exception we fall back to the base __copy_tofrom_user loop. - Anton ] Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powerpc: Make unaligned accesses endian-safe for powerpcRajesh B Prathipati1-1/+6
The generic put_unaligned/get_unaligned macros were made endian-safe by calling the appropriate endian dependent macros based on the endian type of the powerpc processor. Signed-off-by: Rajesh B Prathipati <rprathip@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30powerpc: Fix bad stack check in exception entryMichael Neuling1-1/+1
In EXCEPTION_PROLOG_COMMON() we check to see if the stack pointer (r1) is valid when coming from the kernel. If it's not valid, we die but with a nice oops message. Currently we allocate a stack frame (subtract INT_FRAME_SIZE) before we check to see if the stack pointer is negative. Unfortunately, this won't detect a bad stack where r1 is less than INT_FRAME_SIZE. This patch fixes the check to compare the modified r1 with -INT_FRAME_SIZE. With this, bad kernel stack pointers (including NULL pointers) are correctly detected again. Kudos to Paulus for finding this. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30Linux 3.13-rc6v3.13-rc6Linus Torvalds1-1/+1
2013-12-29PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPIRafael J. Wysocki1-9/+12
It turns out that some BIOSes don't report wakeup GPEs through _PRW, but use them for signaling wakeup anyway, which causes GPE storms to occur on some systems after resume from system suspend. This issue has been uncovered by commit d2e5f0c16ad6 (ACPI / PCI: Rework the setup and cleanup of device wakeup) during the 3.9 development cycle. Work around the problem by installing wakeup notify handlers for all PCI devices with ACPI support (i.e. having ACPI companions) regardless of whether or not the BIOS reports ACPI wakeup support for them. The presence of the wakeup notify handlers alone is not harmful in any way if there are no events for them to handle (they are simply never executed then), but on some systems they are needed to take care of spurious events. Fixes: d2e5f0c16ad6 (ACPI / PCI: Rework the setup and cleanup of device wakeup) References: https://bugzilla.kernel.org/show_bug.cgi?id=63021 Reported-and-tested-by: Agustin Barto <abarto@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-29cpufreq: preserve user_policy across suspend/resumeViresh Kumar1-5/+9
Prevent __cpufreq_add_dev() from overwriting the existing values of user_policy.{min|max|policy|governor} with defaults during resume from system suspend. Fixes: 5302c3fb2e62 ("cpufreq: Perform light-weight init/teardown during suspend/resume") Reported-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-29cpufreq: Clean up after a failing light-weight initializationRafael J. Wysocki1-9/+14
If cpufreq_policy_restore() returns NULL during system resume, __cpufreq_add_dev() should just fall back to the full initialization instead of returning an error, because that may actually make things work. Moreover, it should not leave stale fallback data behind after it has failed to restore a previously existing policy. This change is based on Viresh Kumar's work. Fixes: 5302c3fb2e62 ("cpufreq: Perform light-weight init/teardown during suspend/resume") Reported-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
2013-12-29ARM: pxa: fix USB gadget driver compilation regressionLinus Walleij1-0/+2
After commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" a compilation error was introduced in the PXA25x gadget driver. An attempt to fix the problem was made in commit b144e4ab1ef130e8bf30bcd3e529b7f35112c503 "usb: gadget: fix pxa25x compilation problems" by explictly stating the driver needs the <mach/hardware.h> header, which solved the compilation for a few boards, such as the pxa255-idp and its defconfig. However the Lubbock board has this special clause in drivers/usb/gadget/pxa25x_udc.c: This include file has an implicit dependency on <mach/irqs.h> having been included before <mach/lubbock.h> was included. Before commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" this implicit dependency for the pxa25x_udc compile on the Lubbock was satisfied by <linux/gpio.h> implicitly including <mach/gpio.h> which was in turn including <mach/irqs.h>, apart from the earlier added <mach/hardware.h>. Fix this by having the PXA25x <mach/lubbock.h> explicitly include <mach/irqs.h>. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Greg Kroah-Hartmann <gregkh@linuxfoundation.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-28netfilter: nf_tables: fix wrong datatype in nft_validate_data_load()Pablo Neira Ayuso1-1/+3
This patch fixes dictionary mappings, eg. add rule ip filter input meta dnat set tcp dport map { 22 => 1.1.1.1, 23 => 2.2.2.2 } The kernel was returning -EINVAL in nft_validate_data_load() since the type of the set element data that is passed was the real userspace datatype instead of NFT_DATA_VALUE. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-28batman-adv: fix vlan header accessAntonio Quartulli1-1/+1
When batadv_get_vid() is invoked in interface_rx() the batman-adv header has already been removed, therefore the header_len argument has to be 0. Introduced by c018ad3de61a1dc4194879a53e5559e094aa7b1a ("batman-adv: add the VLAN ID attribute to the TT entry") Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-28batman-adv: clean nf state when removing protocol headerAntonio Quartulli1-0/+5
If an interface enslaved into batman-adv is a bridge (or a virtual interface built on top of a bridge) the nf_bridge member of the skbs reaching the soft-interface is filled with the state about "netfilter bridge" operations. Then, if one of such skbs is locally delivered, the nf_bridge member should be cleaned up to avoid that the old state could mess up with other "netfilter bridge" operations when entering a second bridge. This is needed because batman-adv is an encapsulation protocol. However at the moment skb->nf_bridge is not released at all leading to bogus "netfilter bridge" behaviours. Fix this by cleaning the netfilter state of the skb before it gets delivered to the upper layer in interface_rx(). Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-28batman-adv: fix alignment for batadv_tvlv_tt_changeAntonio Quartulli2-4/+6
Make struct batadv_tvlv_tt_change a multiple 4 bytes long to avoid padding on any architecture. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-28batman-adv: fix size of batadv_bla_claim_dstSimon Wunderlich1-0/+2
Since this is a mac address and always 48 bit, and we can assume that it is always aligned to 2-byte boundaries, add a pack(2) pragma. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-12-28batman-adv: fix size of batadv_icmp_headerAntonio Quartulli3-14/+44
struct batadv_icmp_header currently has a size of 17, which will be padded to 20 on some architectures. Fix this by unrolling the header into the parent structures. Moreover keep the ICMP parsing functions as generic as they are now by using a stub icmp_header struct during packet parsing. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-28batman-adv: fix header alignment by unrolling batadv_headerSimon Wunderlich10-85/+118
The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-12-28batman-adv: fix alignment for batadv_coded_packetSimon Wunderlich1-2/+2
The compiler may decide to pad the structure, and then it does not have the expected size of 46 byte. Fix this by moving it in the pragma pack(2) part of the code. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-12-28netfilter: nf_tables: fix oops when updating table with user chainsPablo Neira Ayuso1-2/+10
This patch fixes a crash while trying to deactivate a table that contains user chains. You can reproduce it via: % nft add table table1 % nft add chain table1 chain1 % nft-table-upd ip table1 dormant [ 253.021026] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 253.021114] IP: [<ffffffff8134cebd>] nf_register_hook+0x35/0x6f [ 253.021167] PGD 30fa5067 PUD 30fa2067 PMD 0 [ 253.021208] Oops: 0000 [#1] SMP [...] [ 253.023305] Call Trace: [ 253.023331] [<ffffffffa0885020>] nf_tables_newtable+0x11c/0x258 [nf_tables] [ 253.023385] [<ffffffffa0878592>] nfnetlink_rcv_msg+0x1f4/0x226 [nfnetlink] [ 253.023438] [<ffffffffa0878418>] ? nfnetlink_rcv_msg+0x7a/0x226 [nfnetlink] [ 253.023491] [<ffffffffa087839e>] ? nfnetlink_bind+0x45/0x45 [nfnetlink] [ 253.023542] [<ffffffff8134b47e>] netlink_rcv_skb+0x3c/0x88 [ 253.023586] [<ffffffffa0878973>] nfnetlink_rcv+0x3af/0x3e4 [nfnetlink] [ 253.023638] [<ffffffff813fb0d4>] ? _raw_read_unlock+0x22/0x34 [ 253.023683] [<ffffffff8134af17>] netlink_unicast+0xe2/0x161 [ 253.023727] [<ffffffff8134b29a>] netlink_sendmsg+0x304/0x332 [ 253.023773] [<ffffffff8130d250>] __sock_sendmsg_nosec+0x25/0x27 [ 253.023820] [<ffffffff8130fb93>] sock_sendmsg+0x5a/0x7b [ 253.023861] [<ffffffff8130d5d5>] ? copy_from_user+0x2a/0x2c [ 253.023905] [<ffffffff8131066f>] ? move_addr_to_kernel+0x35/0x60 [ 253.023952] [<ffffffff813107b3>] SYSC_sendto+0x119/0x15c [ 253.023995] [<ffffffff81401107>] ? sysret_check+0x1b/0x56 [ 253.024039] [<ffffffff8108dc30>] ? trace_hardirqs_on_caller+0x140/0x1db [ 253.024090] [<ffffffff8120164e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 253.024141] [<ffffffff81310caf>] SyS_sendto+0x9/0xb [ 253.026219] [<ffffffff814010e2>] system_call_fastpath+0x16/0x1b Reported-by: Alex Wei <alex.kern.mentor@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>