summaryrefslogtreecommitdiffstats
path: root/fs/gfs2/rgrp.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* gfs2: Make statistics unsigned, suitable for use with do_div()Ben Hutchings2015-09-031-4/+4
| | | | | | | | | | | | | None of these statistics can meaningfully be negative, and the numerator for do_div() must have the type u64. The generic implementation of do_div() used on some 32-bit architectures asserts that, resulting in a compiler error in gfs2_rgrp_congested(). Fixes: 0166b197c2ed ("GFS2: Average in only non-zero round-trip times ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Andreas Gruenbacher <agruenba@redhat.com>
* GFS2: Move glock superblock pointer to field gl_nameBob Peterson2015-09-031-1/+1
| | | | | | | | | | | | | What uniquely identifies a glock in the glock hash table is not gl_name, but gl_name and its superblock pointer. This patch makes the gl_name field correspond to a unique glock identifier. That will allow us to simplify hashing with a future patch, since the hash algorithm can then take the gl_name and hash its components in one operation. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Don't brelse rgrp buffer_heads every allocationBob Peterson2015-06-191-4/+19
| | | | | | | | | | | | | | | | This patch allows the block allocation code to retain the buffers for the resource groups so they don't need to be re-read from buffer cache with every request. This is a performance improvement that's especially noticeable when resource groups are very large. For example, with 2GB resource groups and 4K blocks, there can be 33 blocks for every resource group. This patch allows those 33 buffers to be kept around and not read in and thrown away with every operation. The buffers are released when the resource group is either synced or invalidated. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
* gfs2: fix shadow warning in gfs2_rbm_find()Fabian Frederick2015-05-181-3/+1
| | | | | | | bi was already declared and initialized globally in gfs2_rbm_find() Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
* gfs2: handle NULL rgd in set_rgrp_preferencesAbhi Das2015-05-051-2/+2
| | | | | | | | | | | | | | | | | | | The function set_rgrp_preferences() does not handle the (rarely returned) NULL value from gfs2_rgrpd_get_next() and this patch fixes that. The fs image in question is only 150MB in size which allows for only 1 rgrp to be created. The in-memory rb tree has only 1 node and when gfs2_rgrpd_get_next() is called on this sole rgrp, it returns NULL. (Default behavior is to wrap around the rb tree and return the first node to give the illusion of a circular linked list. In the case of only 1 rgrp, we can't have gfs2_rgrpd_get_next() return the same rgrp (first, last, next all point to the same rgrp)... that would cause unintended consequences and infinite loops.) Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
* GFS2: Average in only non-zero round-trip times for congestion statsBob Peterson2015-04-241-3/+7
| | | | | | | | | | | | This patch changes function gfs2_rgrp_congested so that it only factors in non-zero values into its average round trip time. If the round-trip time is zero for a particular cpu, that cpu has obviously never dealt with bouncing the resource group in question, so factoring in a zero value will only skew the numbers. It also fixes a compile error on some arches related to division. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Use average srttb value in congestion calculationsBob Peterson2015-04-241-4/+9
| | | | | | | | | | | This patch changes function gfs2_rgrp_congested so that it uses an average srttb (smoothed round trip time for blocking rgrp glocks) rather than the CPU-specific value. If we use the CPU-specific value it can incorrectly report no contention when there really is contention due to the glock processing occurring on a different CPU. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
* gfs2: allow quota_check and inplace_reserve to return available blocksAbhi Das2015-03-181-5/+15
| | | | | | | | | | | | | | | | | | | | | struct gfs2_alloc_parms is passed to gfs2_quota_check() and gfs2_inplace_reserve() with ap->target containing the number of blocks being requested for allocation in the current operation. We add a new field to struct gfs2_alloc_parms called 'allowed'. gfs2_quota_check() and gfs2_inplace_reserve() return the max blocks allowed by quota and the max blocks allowed by the chosen rgrp respectively in 'allowed'. A new field 'min_target', when non-zero, tells gfs2_quota_check() and gfs2_inplace_reserve() to not return -EDQUOT/-ENOSPC when there are atleast 'min_target' blocks allowable/available. The assumption is that the caller is ok with just 'min_target' blocks and will likely proceed with allocating them. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: If we use up our block reservation, request more next timeBob Peterson2014-11-031-0/+3
| | | | | | | | | | | If we run out of blocks for a given multi-block allocation, we obviously did not reserve enough. We should reserve more blocks for the next reservation to reduce fragmentation. This patch increases the size hint for reservations when they run out. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Set of distributed preferences for rgrpsBob Peterson2014-11-031-5/+61
| | | | | | | | | | This patch tries to use the journal numbers to evenly distribute which node prefers which resource group for block allocations. This is to help performance. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Use gfs2_rbm_incr in rgblk_freeBob Peterson2014-10-031-9/+13
| | | | | | | | | This patch speeds up GFS2 unlink operations by using function gfs2_rbm_incr rather than continuously calculating the rbm. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: fix bad inode i_goal values during block allocationAbhi Das2014-09-191-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | This patch checks if i_goal is either zero or if doesn't exist within any rgrp (i.e gfs2_blk2rgrpd() returns NULL). If so, it assigns the ip->i_no_addr block as the i_goal. There are two scenarios where a bad i_goal can result in a -EBADSLT error. 1. Attempting to allocate to an existing inode: Control reaches gfs2_inplace_reserve() and ip->i_goal is bad. We need to fix i_goal here. 2. A new inode is created in a directory whose i_goal is hosed: In this case, the parent dir's i_goal is copied onto the new inode. Since the new inode is not yet created, the ip->i_no_addr field is invalid and so, the fix in gfs2_inplace_reserve() as per 1) won't work in this scenario. We need to catch and fix it sooner in the parent dir itself (gfs2_create_inode()), before it is copied to the new inode. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixesFabian Frederick2014-07-181-2/+2
| | | | | | Cc: cluster-devel@redhat.com Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: remove transaction glockBenjamin Marzinski2014-05-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Use pr_<level> more consistentlyJoe Perches2014-03-071-11/+13
| | | | | | | | | | | | | | | Add pr_fmt, remove embedded "GFS2: " prefixes. This now consistently emits lower case "gfs2: " for each message. Other miscellanea around these changes: o Add missing newlines o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: global conversion to pr_foo()Fabian Frederick2014-03-061-9/+9
| | | | | | | | | | -All printk(KERN_foo converted to pr_foo(). -Messages updated to fit in 80 columns. -fs_macros converted as well. -fs_printk removed. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Mark functions as static in gfs2/rgrp.cRashika Kheria2014-02-101-2/+2
| | | | | | | | | | | | | Mark functions as static in gfs2/rgrp.c because they are not used outside this file. This eliminates the following warning in gfs2/rgrp.c: fs/gfs2/rgrp.c:1092:5: warning: no previous prototype for ‘gfs2_rgrp_bh_get’ [-Wmissing-prototypes] fs/gfs2/rgrp.c:1157:5: warning: no previous prototype for ‘update_rgrp_lvb’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Allocate block for xattr at inode alloc time, if requiredSteven Whitehouse2014-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This is another step towards improving the allocation of xattr blocks at inode allocation time. Here we take advantage of Christoph's recent work on ACLs to allocate a block for the xattrs early if we know that we will be adding ACLs to the inode later on. The advantage of that is that it is much more likely that we'll get a contiguous run of two blocks where the first is the inode and the second is the xattr block. We still have to fall back to the original system in case we don't get the requested two contiguous blocks, or in case the ACLs are too large to fit into the block. Future patches will move more of the ACL setting code further up the gfs2_inode_create() function. Also, I'd like to be able to do the same thing with the xattrs from LSMs in due course, too. That way we should be able to slowly reduce the number of independent transactions, at least in the most common cases. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Small cleanupBob Peterson2014-01-161-1/+1
| | | | | | | | | This is a small cleanup to function gfs2_rgrp_go_lock so that it uses rgd instead of its more complicated twin. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Don't use ENOBUFS when ENOMEM is the correct error codeSteven Whitehouse2014-01-161-3/+2
| | | | | | | | | | | | | Al Viro has tactfully pointed out that we are using the incorrect error code in some cases. This patch fixes that, and also removes the (unused) return value for glock dumping. > * gfs2_iget() - ENOBUFS instead of ENOMEM. ENOBUFS is > "No buffer space available (POSIX.1 (XSI STREAMS option))" and since > we don't support STREAMS it's probably fair game, but... what the hell? Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk>
* GFS2: Use range based functions for rgrp sync/invalidationSteven Whitehouse2014-01-031-0/+3
| | | | | | | | | | | | | | | | | | | | Each rgrp header is represented as a single extent on disk, so we can calculate the position within the address space, since we are using address spaces mapped 1:1 to the disk. This means that it is possible to use the range based versions of filemap_fdatawrite/wait and for invalidating the page cache. Our eventual intent is to then be able to merge the address spaces used for rgrps into a single address space, rather than to have one for each glock, saving memory and reducing complexity. Since during umount, the rgrp structures are disposed of before the glocks, we need to store the extent information in the glock so that is is available for a final invalidation. This patch uses a field which is otherwise unused in rgrp glocks to do that, so that we do not have to expand the size of a glock. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Remove test which is always trueSteven Whitehouse2014-01-031-1/+1
| | | | | | | | | | Since gfs2_inplace_reserve() is always called with a valid alloc parms structure, there is no need to test for this within the function itself - and in any case, after we've all ready dereferenced it anyway. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Implement a "rgrp has no extents longer than X" schemeBob Peterson2014-01-031-6/+26
| | | | | | | | | | | With the preceding patch, we started accepting block reservations smaller than the ideal size, which requires a lot more parsing of the bitmaps. To reduce the amount of bitmap searching, this patch implements a scheme whereby each rgrp keeps track of the point at this multi-block reservations will fail. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Drop inadequate rgrps from the reservation treeBob Peterson2014-01-031-3/+4
| | | | | | | | | | | | | | | | | | | | | | This is just basically a resend of a patch I posted earlier. It didn't change from its original, except in diff offsets, etc: This patch fixes a bug in the GFS2 block allocation code. The problem starts if a process already has a multi-block reservation, but for some reason, another process disqualifies it from further allocations. For example, the other process might set on the GFS2_RDF_ERROR bit. The process holding the reservation jumps to label skip_rgrp, but that label comes after the code that removes the reservation from the tree. Therefore, the no longer usable reservation is not removed from the rgrp's reservations tree; it's lost. Eventually, the lost reservation causes the count of reserved blocks to get off, and eventually that causes a BUG_ON(rs->rs_rbm.rgd->rd_reserved < rs->rs_free) to trigger. This patch moves the call to after label skip_rgrp so that the disqualified reservation is properly removed from the tree, thus keeping the rgrp rd_reserved count sane. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: If requested is too large, use the largest extent in the rgrpBob Peterson2014-01-031-15/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | Here is a second try at a patch I posted earlier, which also implements suggestions Steve made: Before this patch, GFS2 would keep searching through all the rgrps until it found one that had a chunk of free blocks big enough to satisfy the size hint, which is based on the file write size, regardless of whether the chunk was big enough to perform the write. However, when doing big writes there may not be a large enough chunk of free blocks in any rgrp, due to file system fragmentation. The largest chunk may be big enough to satisfy the write request, but it may not meet the ideal reservation size from the "size hint". The writes would slow to a crawl because every write would search every rgrp, then finally give up and default to a single-block write. In my case, performance would drop from 425MB/s to 18KB/s, or 24000 times slower. This patch basically makes it so that if we can't find a contiguous chunk of blocks big enough to satisfy the sizehint, we'll use the largest chunk of blocks we found that will still contain the write. It does so by keeping track of the largest run of blocks within the rgrp. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* gfs2: endianness misannotationsAl Viro2013-11-161-2/+2
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* GFS2: Speed up starting point selection for block allocationSteven Whitehouse2013-10-021-10/+31
| | | | | | | | | | | | | When setting the starting point for block allocation, there were calls to both gfs2_rbm_to_block() and gfs2_rbm_from_block() in the common case of there being an active reservation. The gfs2_rbm_from_block() function can be quite slow, and since the two conversions were effectively a no-op, it makes sense to avoid them entirely in this case. There is no functional change here, but the code should be a bit more efficient after this patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Add allocation parameters structureSteven Whitehouse2013-10-021-9/+9
| | | | | | | | | | | | This patch adds a structure to contain allocation parameters with the intention of future expansion of this structure. The idea is that we should be able to add more information about the allocation in the future in order to allow the allocator to make a better job of placing the requests on-disk. There is no functional difference from applying this patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Clean up reservation removalSteven Whitehouse2013-09-271-4/+3
| | | | | | | | | | | | | | | The reservation for an inode should be cleared when it is truncated so that we can start again at a different offset for future allocations. We could try and do better than that, by resetting the search based on where the truncation started from, but this is only a first step. In addition, there are three callers of gfs2_rs_delete() but only one of those should really be testing the value of i_writecount. While we get away with that in the other cases currently, I think it would be better if we made that test specific to the one case which requires it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: new function gfs2_rbm_incrBob Peterson2013-09-181-3/+27
| | | | | | | | | | | | | Since the previous patch eliminated bi in favor of bii, this follow-on patch needed to be adjusted accordingly. Here is the revised version. This patch adds a new function, gfs2_rbm_incr, which increments an rbm structure. This is more efficient than calling gfs2_rbm_to_block, incrementing, then calling gfs2_rbm_from_block. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Introduce rbm field biiBob Peterson2013-09-181-51/+56
| | | | | | | | | | | | | | This is a respin of the original patch. As Steve pointed out, the introduction of field bii makes it easy to eliminate bi itself. This revised patch does just that, replacing bi with bii. This patch adds a new field to the rbm structure, called bii, which is an index into the array of bitmaps for an rgrp. This replaces *bi which was a pointer to the bitmap. This is being done for further optimizations. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Do not reset flags on active reservationsBob Peterson2013-09-171-1/+0
| | | | | | | | | | | | When we used try locks for rgrps on block allocations, it was important to clear the flags field so that we used a blocking hold on the glock. Now that we're not doing try locks, clearing flags is unnecessary, and a waste of time. In fact, it's probably doing the wrong thing because it clears the GL_SKIP bit that was set for the lvb tracking purposes. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: introduce bi_blocks for optimizationBob Peterson2013-09-171-1/+5
| | | | | | | | | | | This patch introduces a new field in the bitmap structure called bi_blocks. Its purpose is to save us from constantly multiplying bi_len by the constant GFS2_NBBY. It also paves the way for more optimization in a future patch. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: optimize rbm_from_block wrt bi_startBob Peterson2013-09-171-1/+1
| | | | | | | | | | | | In function gfs2_rbm_from_block, it starts by checking if the block falls within the first bitmap. It does so by checking if the rbm's offset is less than (rbm->bi->bi_start + rbm->bi->bi_len) * GFS2_NBBY. However, the first bitmap will always have bi_start==0. Therefore this is an unnecessary calculation in a function that gets called billions of times. This patch removes the reference to bi_start. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Fix fstrim boundary conditionsAbhijith Das2013-06-191-6/+8
| | | | | | | | | | | | | | | | | | This patch correctly distinguishes two boundary conditions: 1. When the given range is entire within the unaccounted space between two rgrps, and 2. The range begins beyond the end of the filesystem Also fix the unit of the returned value r.len (total trimming) to be in bytes instead of the (incorrect) 512 byte blocks With this patch, GFS2 passes multiple iterations of all the relevant xfstests (251, 260, 288) with different fs block sizes. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Increase i_writecount during gfs2_setattr_sizeBob Peterson2013-06-031-1/+3
| | | | | | | | | | This patch calls get_write_access in a few functions. This merely increases inode->i_writecount for the duration of the function. That will ensure that any file closes won't delete the inode's multi-block reservation while the function is running. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Use single-block reservations for directoriesBob Peterson2013-05-241-2/+7
| | | | | | | | | | | | | | | | This patch changes the multi-block allocation code, such that directory inodes only get a single block reserved in the bitmap. That way, the bitmaps are more tightly packed together, and there are fewer spans of free blocks for in-use block reservations. This means it takes less time to find a free span of blocks in the bitmap, which speeds things up. This increases the performance of some workloads by almost 2X. In Nate's mockup.py script (which does (1) create dir, (2) create dir in dir, (3) create file in that dir) the test executes in 23 steps rather than 43 steps, a 47% performance improvement. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Remove vestigial parameter ip from function rs_deltreeBob Peterson2013-04-081-8/+8
| | | | | | | | | The functions that delete block reservations from the rgrp block reservations rbtree no longer use the ip parameter. This patch eliminates the parameter. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Clean up inode creation pathSteven Whitehouse2013-04-081-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch cleans up the inode creation code path in GFS2. After the Orlov allocator was merged, a number of potential improvements are now possible, and this is a first set of these. The quota handling is now updated so that it matches the point in the code where the allocation takes place. This means that the one exception in gfs2_alloc_blocks relating to quota is now no longer required, and we can use the generic code everywhere. In addition the call to figure out whether we need to allocate any extra blocks in order to add a directory entry is moved higher up gfs2_create_inode. This means that if it returns an error, we can deal with that at a stage where it is easier to handle that case. The returned status cannot change during the function since we hold an exclusive lock on the directory. Two calls to gfs2_rindex_update have been changed to one, again at the top of gfs2_create_inode to simplify error handling. The time stamps are also now initialised earlier in the creation process, this is gradually moving towards being able to remove the call to gfs2_refresh_inode in gfs2_inode_create once we have all the fields covered. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Issue discards in 512b sectorsBob Peterson2013-04-051-17/+13
| | | | | | | | | | | | | | | This patch changes GFS2's discard issuing code so that it calls function sb_issue_discard rather than blkdev_issue_discard. The code was calling blkdev_issue_discard and specifying the correct sector offset and sector size, but blkdev_issue_discard expects these values to be in terms of 512 byte sectors, even if the native sector size for the device is different. Calling sb_issue_discard with the BLOCK size instead ensures the correct block-to-512b-sector translation. I verified that "minlen" is specified in blocks, so comparing it to a number of blocks is correct. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: return error if malloc failed in gfs2_rs_alloc()Wei Yongjun2013-04-041-1/+1
| | | | | | | | | The error code in gfs2_rs_alloc() is set to ENOMEM when error but never be used, instead, gfs2_rs_alloc() always return 0. Fix to return 'error'. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-02-271-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
| * new helper: file_inode(file)Al Viro2013-02-231-1/+1
| | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | GFS2: Split gfs2_trans_add_bh() into twoSteven Whitehouse2013-01-291-9/+9
|/ | | | | | | | | | | | | | There is little common content in gfs2_trans_add_bh() between the data and meta classes by the time that the functions which it calls are taken into account. The intent here is to split this into two separate functions. Stage one is to introduce gfs2_trans_add_data() and gfs2_trans_add_meta() and update the callers accordingly. Later patches will then pull in the content of gfs2_trans_add_bh() and its dependent functions in order to clean up the code in this area. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Reset rd_last_alloc when it reaches the end of the rgrpBob Peterson2013-01-021-0/+3
| | | | | | | | | | | | | | | | | | | In function rg_mblk_search, it's searching for multiple blocks in a given state (e.g. "free"). If there's an active block reservation its goal is the next free block of that. If the resource group contains the dinode's goal block, that's used for the search. But if neither is the case, it uses the rgrp's last allocated block. That way, consecutive allocations appear after one another on media. The problem comes in when you hit the end of the rgrp; it would never start over and search from the beginning. This became a problem, since if you deleted all the files and data from the rgrp, it would never start over and find free blocks. So it had to keep searching further out on the media to allocate blocks. This patch resets the rd_last_alloc after it does an unsuccessful search at the end of the rgrp. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Stop looking for free blocks at end of rgrpBob Peterson2013-01-021-3/+7
| | | | | | | | | | This patch adds a return code check after calling function gfs2_rbm_from_block while determining the free extent size. That way, when the end of an rgrp is reached, it won't try to process unaligned blocks after the end. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Fix race in gfs2_rs_allocAbhijith Das2013-01-021-12/+10
| | | | | | | | | | | | | | QE aio tests uncovered a race condition in gfs2_rs_alloc where it's possible to come out of the function with a valid ip->i_res allocation but it gets freed before use resulting in a NULL ptr dereference. This patch envelopes the initial short-circuit check for non-NULL ip->i_res into the mutex lock. With this patch, I was able to successfully run the reproducer test multiple times. Resolves: rhbz#878476 Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: remove redundant lvb pointerDavid Teigland2012-11-151-1/+1
| | | | | | | | | The lksb struct already contains a pointer to the lvb, so another directly from the glock struct is not needed. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Fix one RG corner caseSteven Whitehouse2012-11-131-1/+2
| | | | | | | | | For filesystems with only a single resource group, we need to be careful that the allocation loop will not land up with a NULL resource group. This fixes a bug in a previous patch where the gfs2_rgrpd_get_next() function was being used instead of gfs2_rgrpd_get_first() Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Add Orlov allocatorSteven Whitehouse2012-11-071-1/+18
| | | | | | | | | | | | | | | Just like ext3, this works on the root directory and any directory with the +T flag set. Also, just like ext3, any subdirectory created in one of the just mentioned cases will be allocated to a random resource group (GFS2 equivalent of a block group). If you are creating a set of directories, each of which will contain a job running on a different node, then by setting +T on the parent directory before creating the subdirectories, each will land up in a different resource group, and thus resource group contention between nodes will be kept to a minimum. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>