summaryrefslogtreecommitdiffstats
path: root/fs/jbd (follow)
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] jbd: Remove useless loop when writing commit recordJan Kara2008-02-011-8/+6
| | | | | | | | | | Commit block was intended to have several copies of the header. But due to a bug it never had them and actually, nobody checks that. So just remove the useless loop. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext3 can fail badly when device stops accepting BIO_RW_BARRIER requestsNeil Brown2008-02-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some devices - notably dm and md - can change their behaviour in response to BIO_RW_BARRIER requests. They might start out accepting such requests but on reconfiguration, they find out that they cannot any more. ext3 (and other filesystems) deal with this by always testing if BIO_RW_BARRIER requests fail with EOPNOTSUPP, and retrying the write requests without the barrier (probably after waiting for any pending writes to complete). However there is a bug in the handling for this for ext3. When ext3 (jbd actually) decides to submit a BIO_RW_BARRIER request, it sets the buffer_ordered flag on the buffer head. If the request completes successfully, the flag STAYS SET. Other code might then write the same buffer_head after the device has been reconfigured to not accept barriers. This write will then fail, but the "other code" is not ready to handle EOPNOTSUPP errors and the error will be treated as fatal. This can be seen without having to reconfigure a device at exactly the wrong time by putting: if (buffer_ordered(bh)) printk("OH DEAR, and ordered buffer\n"); in the while loop in "commit phase 5" of journal_commit_transaction. If it ever prints the "OH DEAR ..." message (as it does sometimes for me), then that request could (in different circumstances) have failed with EOPNOTSUPP, but that isn't tested for. My proposed fix is to clear the buffer_ordered flag after it has been used, as in the following patch. Signed-off-by: Neil Brown <neilb@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* make jbd/journal.c:__journal_abort_hard() staticAdrian Bunk2008-02-061-1/+1
| | | | | | | | __journal_abort_hard() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* BKL-removal: remove incorrect comment refering to lock_kernel() from jbd/jbd2Andi Kleen2008-02-061-1/+1
| | | | | | | | | | | None of the callers of this function does actually take the BKL as far as I can see. So remove the comment refering to the BKL. Signed-off-by: Andi Kleen <ak@suse.de> Cc: <linux-ext4@vger.kernel.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spinlock: lockbreak cleanupNick Piggin2008-01-302-2/+3
| | | | | | | | | | | | | | | | | | | | The break_lock data structure and code for spinlocks is quite nasty. Not only does it double the size of a spinlock but it changes locking to a potentially less optimal trylock. Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a __raw_spin_is_contended that uses the lock data itself to determine whether there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is not set. Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to decouple it from the spinlock implementation, and make it typesafe (rwlocks do not have any need_lockbreak sites -- why do they even get bloated up with that break_lock then?). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* jbd: do not try lock_acquire after handle made invalidJonas Bonn2008-01-181-0/+2
| | | | | | | | | | | | | This likely fixes the oops in __lock_acquire reported as: http://www.kerneloops.org/raw.php?rawid=2753&msgid= http://www.kerneloops.org/raw.php?rawid=2749&msgid= In these reported oopses, start_this_handle is returning -EROFS. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* jbd: Fix assertion failure in fs/jbd/checkpoint.cJan Kara2007-12-052-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before we start committing a transaction, we call __journal_clean_checkpoint_list() to cleanup transaction's written-back buffers. If this call happens to remove all of them (and there were already some buffers), __journal_remove_checkpoint() will decide to free the transaction because it isn't (yet) a committing transaction and soon we fail some assertion - the transaction really isn't ready to be freed :). We change the check in __journal_remove_checkpoint() to free only a transaction in T_FINISHED state. The locking there is subtle though (as everywhere in JBD ;(). We use j_list_lock to protect the check and a subsequent call to __journal_drop_transaction() and do the same in the end of journal_commit_transaction() which is the only place where a transaction can get to T_FINISHED state. Probably I'm too paranoid here and such locking is not really necessary - checkpoint lists are processed only from log_do_checkpoint() where a transaction must be already committed to be processed or from __journal_clean_checkpoint_list() where kjournald itself calls it and thus transaction cannot change state either. Better be safe if something changes in future... Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* JBD: Fix JBD warnings when compiling with CONFIG_JBD_DEBUGJose R. Santos2007-10-191-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note from Mingming's JBD2 fix: Noticed all warnings are occurs when the debug level is 0. Then found the "jbd2: Move jbd2-debug file to debugfs" patch http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0f49d5d019afa4e94253bfc92f0daca3badb990b changed the jbd2_journal_enable_debug from int type to u8, makes the jbd_debug comparision is always true when the debugging level is 0. Thus the compile warning occurs. Thought about changing the jbd2_journal_enable_debug data type back to int, but can't, because the jbd2-debug is moved to debug fs, where calling debugfs_create_u8() to create the debugfs entry needs the value to be u8 type. Even if we changed the data type back to int, the code is still buggy, kernel should not print jbd2 debug message if the jbd2_journal_enable_debug is set to 0. But this is not the case. The fix is change the level of debugging to 1. The same should fixed in ext3/JBD, but currently ext3 jbd-debug via /proc fs is broken, so we probably should fix it all together. Signed-off-by: Jose R. Santos <jrs@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* jbd: fix commit code to properly abort journalJan Kara2007-10-191-4/+4
| | | | | | | | | | | | We should really call journal_abort() and not __journal_abort_hard() in case of errors. The latter call does not record the error in the journal superblock and thus filesystem won't be marked as with errors later (and user could happily mount it without any warning). Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* jbd: config_jbd_debug cannot create /proc entryJose R. Santos2007-10-191-43/+21
| | | | | | | | | | | | | | | | | | The jbd-debug file used to be located in /proc/sys/fs/jbd-debug, but create_proc_entry() does not do lookups on file names that are more that one directory deep. This causes the entry creation to fail and hence, no proc file is created. Instead of fixing this on procfs might as well move the jbd2-debug file to debugfs which would be the preferred location for this kind of tunable. The new location is now /sys/kernel/debug/jbd/jbd-debug. [akpm@linux-foundation.org: zillions of cleanups] Signed-off-by: Jose R. Santos <jrs@us.ibm.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* JBD/ext3 cleanups: convert to kzallocMingming Cao2007-10-192-4/+2
| | | | | | | | Convert kmalloc to kzalloc() and get rid of the memset(). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sparse pointer use of zero as nullStephen Hemminger2007-10-182-10/+11
| | | | | | | | | | | | | | | | | Get rid of sparse related warnings from places that use integer as NULL pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Ian Kent <raven@themaw.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* JBD: replace jbd_kmalloc with kmalloc directlyMingming Cao2007-10-182-12/+3
| | | | | | This patch cleans up jbd_kmalloc and replace it with kmalloc directly Signed-off-by: Mingming Cao <cmm@us.ibm.com>
* JBD: JBD slab allocation cleanupsMingming Cao2007-10-183-91/+11
| | | | | | | | | | JBD: Replace slab allocations with page allocations JBD allocate memory for committed_data and frozen_data from slab. However JBD should not pass slab pages down to the block layer. Use page allocator pages instead. This will also prepare JBD for the large blocksize patchset. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
* Group short-lived and reclaimable kernel allocationsMel Gorman2007-10-162-4/+6
| | | | | | | | | | | | | | | | | | This patch marks a number of allocations that are either short-lived such as network buffers or are reclaimable such as inode allocations. When something like updatedb is called, long-lived and unmovable kernel allocations tend to be spread throughout the address space which increases fragmentation. This patch groups these allocations together as much as possible by adding a new MIGRATE_TYPE. The MIGRATE_RECLAIMABLE type is for allocations that can be reclaimed on demand, but not moved. i.e. they can be migrated by deleting them and re-reading the information from elsewhere. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lockdep: annotate journal_start()Peter Zijlstra2007-10-111-0/+9
| | | | | | | | | | On Fri, 2007-07-13 at 02:05 -0700, Andrew Morton wrote: > Except lockdep doesn't know about journal_start(), which has ranking > requirements similar to a semaphore. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* mm: Remove slab destructors from kmem_cache_create().Paul Mundt2007-07-202-7/+5
| | | | | | | | | | | | | | Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* is_power_of_2(): jbdvignesh babu2007-07-161-2/+3
| | | | | | | | | Replace (n & (n-1)) in the context of power of 2 checks with is_power_of_2(). Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* jbd commit: fix transaction droppingJan Kara2007-07-161-1/+2
| | | | | | | | | | | | | We have to check that also the second checkpoint list is non-empty before dropping the transaction. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fix file specification in commentsUwe Kleine-König2007-05-094-4/+4
| | | | | | | Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* jbd: check for error returned by kthread_create on creating journal threadPavel Emelianov2007-05-081-4/+9
| | | | | | | | | | | | | | | | | If the thread failed to create the subsequent wait_event will hang forever. This is likely to happen if kernel hits max_threads limit. Will be critical for virtualization systems that limit the number of tasks and kernel memory usage within the container. (akpm: JBD should be converted fully to the kthread API: kthread_should_stop() and kthread_stop()). Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* header cleaning: don't include smp_lock.h when not usedRandy Dunlap2007-05-084-4/+0
| | | | | | | | | | | | Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] jbd: wait for already submitted t_sync_datalist buffer to completeHisashi Hifumi2006-12-221-2/+6
| | | | | | | | | | | | | | | | | | | | | In the current jbd code, if a buffer on BJ_SyncData list is dirty and not locked, the buffer is refiled to BJ_Locked list, submitted to the IO and waited for IO completion. But the fsstress test showed the case that when a buffer was already submitted to the IO just before the buffer_dirty(bh) check, the buffer was not waited for IO completion. Following patch solves this problem. If it is assumed that a buffer is submitted to the IO before the buffer_dirty(bh) check and still being written to disk, this buffer is refiled to BJ_Locked list. Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Jan Kara <jack@ucw.cz> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] user of the jiffies rounding code: JBDArjan van de Ven2006-12-101-1/+1
| | | | | | | | | | | | | | | This patch introduces a user: of the round_jiffies() function; the "5 second" ext3/jbd wakeup. While "every 5 seconds" doesn't sound as a problem, there can be many of these (and these timers do add up over all the kernel). The "5 second" wakeup isn't really timing sensitive; in addition even with rounding it'll still happen every 5 seconds (with the exception of the very first time, which is likely to be rounded up to somewhere closer to 6 seconds) Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] make fs/jbd/transaction.c:__journal_temp_unlink_buffer() staticAdrian Bunk2006-12-071-1/+3
| | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Add include/linux/freezer.h and move definitions from sched.hNigel Cunningham2006-12-071-1/+1
| | | | | | | | | | | | | Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] slab: remove kmem_cache_tChristoph Lameter2006-12-072-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] jbd: journal_dirty_data re-check for unmapped buffersEric Sandeen2006-10-281-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | When running several fsx's and other filesystem stress tests, we found cases where an unmapped buffer was still being sent to submit_bh by the ext3 dirty data journaling code. I saw this happen in two ways, both related to another thread doing a truncate which would unmap the buffer in question. Either we would get into journal_dirty_data with a bh which was already unmapped (although journal_dirty_data_fn had checked for this earlier, the state was not locked at that point), or it would get unmapped in the middle of journal_dirty_data when we dropped locks to call sync_dirty_buffer. By re-checking for mapped state after we've acquired the bh state lock, we should avoid these races. If we find a buffer which is no longer mapped, we essentially ignore it, because journal_unmap_buffer has already decided that this buffer can go away. I've also added tracepoints in these two cases, and made a couple other tracepoint changes that I found useful in debugging this. Signed-off-by: Eric Sandeen <esandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3/4: fix J_ASSERT(transaction->t_updates > 0) in journal_stop()OGAWA Hirofumi2006-10-201-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A disk generated some I/O error, after it, I hitted J_ASSERT(transaction->t_updates > 0) in journal_stop(). It seems to happened on ext3_truncate() path from stack trace. Then, maybe the following case may trigger J_ASSERT(transaction->t_updates > 0). ext3_truncate() -> ext3_free_branches() -> ext3_journal_test_restart() -> ext3_journal_restart() -> journal_restart() transaction->t_updates--; /* another process aborted journal */ -> start_this_handle() returns -EROFS without transaction->t_updates++; -> ext3_journal_stop() -> journal_stop() J_ASSERT(transaction->t_updates > 0) If journal was aborted in middle of journal_restart(), ext3_truncate() may trigger J_ASSERT(). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] null dereference in fs/jbd/journal.cEric Sesterhenn2006-10-111-1/+2
| | | | | | | | | | Since commit d1807793e1e7e502e3dc047115e9dbc3b50e4534 we dereference a NULL pointer. Coverity id #1432. We set journal to NULL, and use it directly afterwards. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* fix file specification in commentsUwe Zeisberger2006-10-032-2/+2
| | | | | | | Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] JBD: memory leak in "journal_init_dev()"Zoltan Menyhart2006-09-291-11/+10
| | | | | | | | We leak a bh ref in "journal_init_dev()" in case of failure. Signed-off-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] JBD: Make journal_brelse_array() staticDave Kleikamp2006-09-291-1/+1
| | | | | | | | | | | | It's always good to make symbols static when we can, and this also eliminates the need to rename the function in jbd2 Suggested by Eric Sandeen. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3: Fix sparse warningsDave Kleikamp2006-09-271-1/+1
| | | | | | | | Fixing up some endian-ness warnings in preparation to clone ext4 from ext3. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3: More whitespace cleanupsDave Kleikamp2006-09-274-6/+6
| | | | | | | | | More white space cleanups in preparation of cloning ext4 from ext3. Removing spaces that precede a tab. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] JBD: 16T fixesEric Sandeen2006-09-271-3/+3
| | | | | | | | | | | | | | | | | | | These are a few places I've found in jbd that look like they may not be 16T-safe, or consistent with the use of unsigned longs for block containers. Problems here would be somewhat hard to hit, would require journal blocks past the 8T boundary, which would not be terribly common. Still, should fix. (some of these have come from the ext4 work on jbd as well). I think there's one more possibility that the wrap() function may not be safe IF your last block in the journal butts right up against the 232 block boundary, but that seems like a VERY remote possibility, and I'm not worrying about it at this point. Signed-off-by: Eric Sandeen <esandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] jbd: use BUILD_BUG_ON in journal initAlexey Dobriyan2006-09-271-7/+1
| | | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Tweedie <sct@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3 and jbd cleanup: remove whitespaceMingming Cao2006-09-275-169/+169
| | | | | | | | Remove whitespace from ext3 and jbd, before we clone ext4. Signed-off-by: Mingming Cao<cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] jbd: add lock annotation to jbd_sync_bhJosh Triplett2006-09-271-0/+1
| | | | | | | | | | | jbd_sync_bh releases journal->j_list_lock. Add a lock annotation to this function so that sparse can check callers for lock pairing, and so that sparse will not complain about this function since it intentionally uses the lock in this manner. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] jbd: fix commit of ordered data buffersJan Kara2006-09-261-69/+113
| | | | | | | | | | | | | | | | | | | | | | | | | Original commit code assumes, that when a buffer on BJ_SyncData list is locked, it is being written to disk. But this is not true and hence it can lead to a potential data loss on crash. Also the code didn't count with the fact that journal_dirty_data() can steal buffers from committing transaction and hence could write buffers that no longer belong to the committing transaction. Finally it could possibly happen that we tried writing out one buffer several times. The patch below tries to solve these problems by a complete rewrite of the data commit code. We go through buffers on t_sync_datalist, lock buffers needing write out and store them in an array. Buffers are also immediately refiled to BJ_Locked list or unfiled (if the write out is completed). When the array is full or we have to block on buffer lock, we submit all accumulated buffers for IO. [suitable for 2.6.18.x around the 2.6.19-rc2 timeframe] Signed-off-by: Jan Kara <jack@suse.cz> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] manage-jbd-its-own-slab fixBadari Pulavarty2006-09-011-1/+1
| | | | | | | | | Missed a place where I forgot to convert kfree() to kmem_cache_free() as part of jbd-manage-its-own-slab changes. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Manage jbd allocations from its own slabsBadari Pulavarty2006-08-273-13/+94
| | | | | | | | | | | | | | | | JBD currently allocates commit and frozen buffers from slabs. With CONFIG_SLAB_DEBUG, its possible for an allocation to cross the page boundary causing IO problems. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=200127 So, instead of allocating these from regular slabs - manage allocation from its own slabs and disable slab debug for these slabs. [akpm@osdl.org: cleanups] Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] add poison.h and patch primary usersRandy Dunlap2006-06-281-1/+2
| | | | | | | | | | | | | | | | | Localize poison values into one header file for better documentation and easier/quicker debugging and so that the same values won't be used for multiple purposes. Use these constants in core arch., mm, driver, and fs code. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Matt Mackall <mpm@selenic.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3: fix memory leak when the journal file is corruptedTheodore Ts'o2006-06-251-0/+1
| | | | | | Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] JBD: split checkpoint listsJan Kara2006-06-231-180/+239
| | | | | | | | | | | | | | Split the checkpoint list of the transaction into two lists. In the first list we keep the buffers that need to be submitted for IO. In the second list are kept buffers that were already submitted and we just have to wait for the IO to complete. This should simplify a handling of checkpoint lists a bit and can eventually be also a performance gain. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] jbd: avoid kfree(NULL)Andrew Morton2006-06-231-3/+6
| | | | | | | | | | | | There are a couple of places where JBD has to check to see whether an unneeded memory allocation was performed. Usually it _was_ needed, so we end up calling kfree(NULL). We can micro-optimise that by checking the pointer before calling kfree(). Thanks to Steven Rostedt <rostedt@goodmis.org> for identifying this. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] jbd: fix BUG in journal_commit_transaction()Jan Kara2006-06-232-6/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix possible assertion failure in journal_commit_transaction() on jh->b_next_transaction == NULL (when we are processing BJ_Forget list and buffer is not jbddirty). !jbddirty buffers can be placed on BJ_Forget list for example by journal_forget() or by __dispose_buffer() - generally such buffer means that it has been freed by this transaction. Freed buffers should not be reallocated until the transaction has committed (that's why we have the assertion there) but they *can* be reallocated when the transaction has already been committed to disk and we are just processing the BJ_Forget list (as soon as we remove b_committed_data from the bitmap bh, ext3 will be able to reallocate buffers freed by the committing transaction). So we have to also count with the case that the buffer has been reallocated and b_next_transaction has been already set. And one more subtle point: it can happen that we manage to reallocate the buffer and also mark it jbddirty. Then we also add the freed buffer to the checkpoint list of the committing trasaction. But that should do no harm. Non-jbddirty buffers should be filed to BJ_Reserved and not BJ_Metadata list. It can actually happen that we refile such buffers during the commit phase when we reallocate in the running transaction blocks deleted in committing transaction (and that can happen if the committing transaction already wrote all the data and is just cleaning up BJ_Forget list). Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: "Stephen C. Tweedie" <sct@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Make address_space_operations->invalidatepage return voidNeilBrown2006-03-261-8/+5
| | | | | | | | | | | | | | | | The return value of this function is never used, so let's be honest and declare it as void. Some places where invalidatepage returned 0, I have inserted comments suggesting a BUG_ON. [akpm@osdl.org: JBD BUG fix] [akpm@osdl.org: rework for git-nfs] [akpm@osdl.org: don't go BUG in block_invalidate_page()] Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] jbd: convert kjournald to kthread APIAndrew Morton2006-03-251-4/+4
| | | | | Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] jbd: embed j_commit_timer in journal structAndrew Morton2006-03-252-12/+11
| | | | | | | | | The kjournald timer is currently on the kernel thread's stack and the journal structure points at it. Save a pointer hop by moving the timer into the journal structure. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 00:00:03 +0100