summaryrefslogtreecommitdiffstats
path: root/fs (follow)
Commit message (Collapse)AuthorAgeFilesLines
* mm: zswap: add basic meminfo and vmstat coverageJohannes Weiner2022-05-191-0/+7
| | | | | | | | | | | | | | | | | | | | | Currently it requires poking at debugfs to figure out the size and population of the zswap cache on a host. There are no counters for reads and writes against the cache. As a result, it's difficult to understand zswap behavior on production systems. Print zswap memory consumption and how many pages are zswapped out in /proc/meminfo. Count zswapouts and zswapins in /proc/vmstat. Link: https://lkml.kernel.org/r/20220510152847.230957-6-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* mm/uffd: enable write protection for shmem & hugetlbfsPeter Xu2022-05-131-18/+3
| | | | | | | | | | | | | | | | | | | | | | | | | We've had all the necessary changes ready for both shmem and hugetlbfs. Turn on all the shmem/hugetlbfs switches for userfaultfd-wp. We can expand UFFD_API_RANGE_IOCTLS_BASIC with _UFFDIO_WRITEPROTECT too because all existing types now support write protection mode. Since vma_can_userfault() will be used elsewhere, move into userfaultfd_k.h. Link: https://lkml.kernel.org/r/20220405014926.15101-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* mm/pagemap: recognize uffd-wp bit for shmem/hugetlbfsPeter Xu2022-05-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | This requires the pagemap code to be able to recognize the newly introduced swap special pte for uffd-wp, meanwhile the general case for hugetlb that we recently start to support. It should make pagemap uffd-wp support complete. Link: https://lkml.kernel.org/r/20220405014923.15047-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* mm/hugetlb: only drop uffd-wp special pte if requiredPeter Xu2022-05-131-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As with shmem uffd-wp special ptes, only drop the uffd-wp special swap pte if unmapping an entire vma or synchronized such that faults can not race with the unmap operation. This requires passing zap_flags all the way to the lowest level hugetlb unmap routine: __unmap_hugepage_range. In general, unmap calls originated in hugetlbfs code will pass the ZAP_FLAG_DROP_MARKER flag as synchronization is in place to prevent faults. The exception is hole punch which will first unmap without any synchronization. Later when hole punch actually removes the page from the file, it will check to see if there was a subsequent fault and if so take the hugetlb fault mutex while unmapping again. This second unmap will pass in ZAP_FLAG_DROP_MARKER. The justification of "whether to apply ZAP_FLAG_DROP_MARKER flag when unmap a hugetlb range" is (IMHO): we should never reach a state when a page fault could errornously fault in a page-cache page that was wr-protected to be writable, even in an extremely short period. That could happen if e.g. we pass ZAP_FLAG_DROP_MARKER when hugetlbfs_punch_hole() calls hugetlb_vmdelete_list(), because if a page faults after that call and before remove_inode_hugepages() is executed, the page cache can be mapped writable again in the small racy window, that can cause unexpected data overwritten. [peterx@redhat.com: fix sparse warning] Link: https://lkml.kernel.org/r/Ylcdw8I1L5iAoWhb@xz-m1.local [akpm@linux-foundation.org: move zap_flags_t from mm.h to mm_types.h to fix build issues] Link: https://lkml.kernel.org/r/20220405014915.14873-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* mm: teach core mm about pte markersPeter Xu2022-05-131-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch still does not use pte marker in any way, however it teaches the core mm about the pte marker idea. For example, handle_pte_marker() is introduced that will parse and handle all the pte marker faults. Many of the places are more about commenting it up - so that we know there's the possibility of pte marker showing up, and why we don't need special code for the cases. [peterx@redhat.com: userfaultfd.c needs swapops.h] Link: https://lkml.kernel.org/r/YmRlVj3cdizYJsr0@xz-m1.local Link: https://lkml.kernel.org/r/20220405014833.14015-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* hugetlbfs: fix hugetlbfs_statfs() lockingMina Almasry2022-05-131-2/+2
| | | | | | | | | | | | After commit db71ef79b59b ("hugetlb: make free_huge_page irq safe"), the subpool lock should be locked with spin_lock_irq() and all call sites was modified as such, except for the ones in hugetlbfs_statfs(). Link: https://lkml.kernel.org/r/20220429202207.3045-1-almasrymina@google.com Fixes: db71ef79b59b ("hugetlb: make free_huge_page irq safe") Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* mm/mprotect: use mmu_gatherNadav Amit2022-05-131-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* VFS: add FMODE_CAN_ODIRECT file flagNeilBrown2022-05-104-20/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently various places test if direct IO is possible on a file by checking for the existence of the direct_IO address space operation. This is a poor choice, as the direct_IO operation may not be used - it is only used if the generic_file_*_iter functions are called for direct IO and some filesystems - particularly NFS - don't do this. Instead, introduce a new f_mode flag: FMODE_CAN_ODIRECT and change the various places to check this (avoiding pointer dereferences). do_dentry_open() will set this flag if ->direct_IO is present, so filesystems do not need to be changed. NFS *is* changed, to set the flag explicitly and discard the direct_IO entry in the address_space_operations for files. Other filesystems which currently use noop_direct_IO could usefully be changed to set this flag instead. Link: https://lkml.kernel.org/r/164859778128.29473.15189737957277399416.stgit@noble.brown Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* nfs: rename nfs_direct_IO and use as ->swap_rwNeilBrown2022-05-102-17/+11
| | | | | | | | | | | | | | | | | | | | The nfs_direct_IO() exists to support SWAP IO, but hasn't worked for a while. We now need a ->swap_rw function which behaves slightly differently, returning zero for success rather than a byte count. So modify nfs_direct_IO accordingly, rename it, and use it as the ->swap_rw function. Link: https://lkml.kernel.org/r/165119301493.15698.7491285551903597618.stgit@noble.brown Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> (on Renesas RSK+RZA1 with 32 MiB of SDRAM) Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* mm: introduce ->swap_rw and use it for reads from SWP_FS_OPS swap-spaceNeilBrown2022-05-102-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | swap currently uses ->readpage to read swap pages. This can only request one page at a time from the filesystem, which is not most efficient. swap uses ->direct_IO for writes which while this is adequate is an inappropriate over-loading. ->direct_IO may need to had handle allocate space for holes or other details that are not relevant for swap. So this patch introduces a new address_space operation: ->swap_rw. In this patch it is used for reads, and a subsequent patch will switch writes to use it. No filesystem yet supports ->swap_rw, but that is not a problem because no filesystem actually works with filesystem-based swap. Only two filesystems set SWP_FS_OPS: - cifs sets the flag, but ->direct_IO always fails so swap cannot work. - nfs sets the flag, but ->direct_IO calls generic_write_checks() which has failed on swap files for several releases. To ensure that a NULL ->swap_rw isn't called, ->activate_swap() for both NFS and cifs are changed to fail if ->swap_rw is not set. This can be removed if/when the function is added. Future patches will restore swap-over-NFS functionality. To submit an async read with ->swap_rw() we need to allocate a structure to hold the kiocb and other details. swap_readpage() cannot handle transient failure, so we create a mempool to provide the structures. Link: https://lkml.kernel.org/r/164859778125.29473.13430559328221330589.stgit@noble.brown Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* mm: move responsibility for setting SWP_FS_OPS to ->swap_activateNeilBrown2022-05-102-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a filesystem wishes to handle all swap IO itself (via ->direct_IO and ->readpage), rather than just providing devices addresses for submit_bio(), SWP_FS_OPS must be set. Currently the protocol for setting this it to have ->swap_activate return zero. In that case SWP_FS_OPS is set, and add_swap_extent() is called for the entire file. This is a little clumsy as different return values for ->swap_activate have quite different meanings, and it makes it hard to search for which filesystems require SWP_FS_OPS to be set. So remove the special meaning of a zero return, and require the filesystem to set SWP_FS_OPS if it so desires, and to always call add_swap_extent() as required. Currently only NFS and CIFS return zero for add_swap_extent(). Link: https://lkml.kernel.org/r/164859778123.29473.17908205846599043598.stgit@noble.brown Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* ksm: count ksm merging pages for each processxu xin2022-04-291-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some applications or containers want to use KSM by calling madvise() to advise areas of address space to be MERGEABLE. But they may not know which applications are more likely to cause real merges in the deployment. If this patch is applied, it helps them know their corresponding number of merged pages, and then optimize their app code. As current KSM only counts the number of KSM merging pages(e.g. ksm_pages_sharing and ksm_pages_shared) of the whole system, we cannot see the more fine-grained KSM merging, for the upper application optimization, the merging area cannot be set easily according to the KSM page merging probability of each process. Therefore, it is necessary to add extra statistical means so that the upper level users can know the detailed KSM merging information of each process. We add a new proc file named as ksm_merging_pages under /proc/<pid>/ to indicate the involved ksm merging pages of this process. [akpm@linux-foundation.org: fix comment typo, remove BUG_ON()s] Link: https://lkml.kernel.org/r/20220325082318.2352853-1-xu.xin16@zte.com.cn Signed-off-by: xu xin <xu.xin16@zte.com.cn> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Yang Yang <yang.yang29@zte.com.cn> Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Ohhoon Kwon <ohoono.kwon@samsung.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Feng Tang <feng.tang@intel.com> Cc: Yang Yang <yang.yang29@zte.com.cn> Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn> Cc: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* mm: hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP*Muchun Song2022-04-291-8/+8
| | | | | | | | | | | | | The word of "free" is not expressive enough to express the feature of optimizing vmemmap pages associated with each HugeTLB, rename this keywork to "optimize". In this patch , cheanup configs to make code more expressive. Link: https://lkml.kernel.org/r/20220404074652.68024-4-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* dax: fix missing writeprotect the pte entryMuchun Song2022-04-291-87/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently dax_mapping_entry_mkclean() fails to clean and write protect the pte entry within a DAX PMD entry during an *sync operation. This can result in data loss in the following sequence: 1) process A mmap write to DAX PMD, dirtying PMD radix tree entry and making the pmd entry dirty and writeable. 2) process B mmap with the @offset (e.g. 4K) and @length (e.g. 4K) write to the same file, dirtying PMD radix tree entry (already done in 1)) and making the pte entry dirty and writeable. 3) fsync, flushing out PMD data and cleaning the radix tree entry. We currently fail to mark the pte entry as clean and write protected since the vma of process B is not covered in dax_entry_mkclean(). 4) process B writes to the pte. These don't cause any page faults since the pte entry is dirty and writeable. The radix tree entry remains clean. 5) fsync, which fails to flush the dirty PMD data because the radix tree entry was clean. 6) crash - dirty data that should have been fsync'd as part of 5) could still have been in the processor cache, and is lost. Just to use pfn_mkclean_range() to clean the pfns to fix this issue. Link: https://lkml.kernel.org/r/20220403053957.10770-6-songmuchun@bytedance.com Fixes: 4b4bb46d00b3 ("dax: clear dirty entry tags on cache flush") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* dax: fix cache flush on PMD-mapped pagesMuchun Song2022-04-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The flush_cache_page() only remove a PAGE_SIZE sized range from the cache. However, it does not cover the full pages in a THP except a head page. Replace it with flush_cache_range() to fix this issue. This is just a documentation issue with the respect to properly documenting the expected usage of cache flushing before modifying the pmd. However, in practice this is not a problem due to the fact that DAX is not available on architectures with virtually indexed caches per: commit d92576f1167c ("dax: does not work correctly with virtual aliasing caches") Link: https://lkml.kernel.org/r/20220403053957.10770-3-songmuchun@bytedance.com Fixes: f729c8c9b24f ("dax: wrprotect pmd_t in dax_mapping_entry_mkclean") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* fs/proc/task_mmu.c: remove redundant page validation of pte_pageXianting Tian2022-04-291-2/+0
| | | | | | | | | | | | | | pte_page() always returns a valid page, so remove the redundant page validation, as we did in many other places. Link: https://lkml.kernel.org/r/20220316025947.328276-1-xianting.tian@linux.alibaba.com Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* mm: hugetlb_vmemmap: introduce ARCH_WANT_HUGETLB_PAGE_FREE_VMEMMAPMuchun Song2022-04-291-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The feature of minimizing overhead of struct page associated with each HugeTLB page is implemented on x86_64, however, the infrastructure of this feature is already there, we could easily enable it for other architectures. Introduce ARCH_WANT_HUGETLB_PAGE_FREE_VMEMMAP for other architectures to be easily enabled. Just select this config if they want to enable this feature. Link: https://lkml.kernel.org/r/20220331065640.5777-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Barry Song <baohua@kernel.org> Tested-by: Barry Song <baohua@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Bodeddula Balasubramaniam <bodeddub@amazon.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: James Morse <james.morse@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Will Deacon <will@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* Merge tag 'gfs2-v5.18-rc4-fix2' of ↵Linus Torvalds2022-04-281-4/+0
|\ | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: - No short reads or writes upon glock contention * tag 'gfs2-v5.18-rc4-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: No short reads or writes upon glock contention
| * gfs2: No short reads or writes upon glock contentionAndreas Gruenbacher2022-04-281-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered I/O") changed gfs2_file_read_iter() and gfs2_file_buffered_write() to allow dropping the inode glock while faulting in user buffers. When the lock was dropped, a short result was returned to indicate that the operation was interrupted. As pointed out by Linus (see the link below), this behavior is broken and the operations should always re-acquire the inode glock and resume the operation instead. Link: https://lore.kernel.org/lkml/CAHk-=whaz-g_nOOoo8RRiWNjnv2R+h6_xk2F1J4TuSRxk1MtLw@mail.gmail.com/ Fixes: 00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered I/O") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
* | Merge tag 'xfs-5.18-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds2022-04-284-36/+38
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull xfs fixes from Dave Chinner: - define buffer bit flags as unsigned to fix gcc-5 + c11 warnings - remove redundant XFS fields from MAINTAINERS - fix inode buffer locking order regression * tag 'xfs-5.18-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: reorder iunlink remove operation in xfs_ifree MAINTAINERS: update IOMAP FILESYSTEM LIBRARY and XFS FILESYSTEM xfs: convert buffer flags to unsigned.
| * | xfs: reorder iunlink remove operation in xfs_ifreeDave Chinner2022-04-211-11/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The O_TMPFILE creation implementation creates a specific order of operations for inode allocation/freeing and unlinked list modification. Currently both are serialised by the AGI, so the order doesn't strictly matter as long as the are both in the same transaction. However, if we want to move the unlinked list insertions largely out from under the AGI lock, then we have to be concerned about the order in which we do unlinked list modification operations. O_TMPFILE creation tells us this order is inode allocation/free, then unlinked list modification. Change xfs_ifree() to use this same ordering on unlinked list removal. This way we always guarantee that when we enter the iunlinked list removal code from this path, we already have the AGI locked and we don't have to worry about lock nesting AGI reads inside unlink list locks because it's already locked and attached to the transaction. We can do this safely as the inode freeing and unlinked list removal are done in the same transaction and hence are atomic operations with respect to log recovery. Reported-by: Frank Hofmann <fhofmann@cloudflare.com> Fixes: 298f7bec503f ("xfs: pin inode backing buffer to the inode log item") Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
| * | xfs: convert buffer flags to unsigned.Dave Chinner2022-04-213-25/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. This manifests as a compiler error such as: /kisskb/src/fs/xfs/./xfs_trace.h:432:2: note: in expansion of macro 'TP_printk' TP_printk("dev %d:%d daddr 0x%llx bbcount 0x%x hold %d pincount %d " ^ /kisskb/src/fs/xfs/./xfs_trace.h:440:5: note: in expansion of macro '__print_flags' __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), ^ /kisskb/src/fs/xfs/xfs_buf.h:67:4: note: in expansion of macro 'XBF_UNMAPPED' { XBF_UNMAPPED, "UNMAPPED" } ^ /kisskb/src/fs/xfs/./xfs_trace.h:440:40: note: in expansion of macro 'XFS_BUF_FLAGS' __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), ^ /kisskb/src/fs/xfs/./xfs_trace.h: In function 'trace_raw_output_xfs_buf_flags_class': /kisskb/src/fs/xfs/xfs_buf.h:46:23: error: initializer element is not constant #define XBF_UNMAPPED (1 << 31)/* do not map the buffer */ as __print_flags assigns XFS_BUF_FLAGS to a structure that uses an unsigned long for the flag. Since this results in the value of XBF_UNMAPPED causing a signed integer overflow, the result is technically undefined behavior, which gcc-5 does not accept as an integer constant. This is based on a patch from Arnd Bergman <arnd@arndb.de>. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Chandan Babu R <chandan.babu@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* | | Merge tag 'zonefs-5.18-rc5' of ↵Linus Torvalds2022-04-271-5/+41
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fixes from Damien Le Moal: "Two fixes for rc5: - Fix inode initialization to make sure that the inode flags are all cleared. - Use zone reset operation instead of close to make sure that the zone of an empty sequential file in never in an active state after closing the file" * tag 'zonefs-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Fix management of open zones zonefs: Clear inode information flags on inode creation
| * | zonefs: Fix management of open zonesDamien Le Moal2022-04-211-5/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mount option "explicit_open" manages the device open zone resources to ensure that if an application opens a sequential file for writing, the file zone can always be written by explicitly opening the zone and accounting for that state with the s_open_zones counter. However, if some zones are already open when mounting, the device open zone resource usage status will be larger than the initial s_open_zones value of 0. Ensure that this inconsistency does not happen by closing any sequential zone that is open when mounting. Furthermore, with ZNS drives, closing an explicitly open zone that has not been written will change the zone state to "closed", that is, the zone will remain in an active state. Since this can then cause failures of explicit open operations on other zones if the drive active zone resources are exceeded, we need to make sure that the zone is not active anymore by resetting it instead of closing it. To address this, zonefs_zone_mgmt() is modified to change a REQ_OP_ZONE_CLOSE request into a REQ_OP_ZONE_RESET for sequential zones that have not been written. Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
| * | zonefs: Clear inode information flags on inode creationDamien Le Moal2022-04-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that the i_flags field of struct zonefs_inode_info is cleared to 0 when initializing a zone file inode, avoiding seeing the flag ZONEFS_ZONE_OPEN being incorrectly set. Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
* | | Merge tag 'gfs2-v5.18-rc4-fix' of ↵Linus Torvalds2022-04-261-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: - Only re-check for direct I/O writes past the end of the file after re-acquiring the inode glock. * tag 'gfs2-v5.18-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Don't re-check for write past EOF unnecessarily
| * | | gfs2: Don't re-check for write past EOF unnecessarilyAndreas Gruenbacher2022-04-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Only re-check for direct I/O writes past the end of the file after re-acquiring the inode glock. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
* | | | Merge tag 'for-5.18-rc4-tag' of ↵Linus Torvalds2022-04-269-29/+76
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - direct IO fixes: - restore passing file offset to correctly calculate checksums when repairing on read and bio split happens - use correct bio when sumitting IO on zoned filesystem - zoned mode fixes: - fix selection of device to correctly calculate device capabilities when allocating a new bio - use a dedicated lock for exclusion during relocation - fix leaked plug after failure syncing log - fix assertion during scrub and relocation * tag 'for-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: use dedicated lock for data relocation btrfs: fix assertion failure during scrub due to block group reallocation btrfs: fix direct I/O writes for split bios on zoned devices btrfs: fix direct I/O read repair for split bios btrfs: fix and document the zoned device choice in alloc_new_bio btrfs: fix leaked plug after failure syncing log on zoned filesystems
| * | | | btrfs: zoned: use dedicated lock for data relocationNaohiro Aota2022-04-213-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, we use btrfs_inode_{lock,unlock}() to grant an exclusive writeback of the relocation data inode in btrfs_zoned_data_reloc_{lock,unlock}(). However, that can cause a deadlock in the following path. Thread A takes btrfs_inode_lock() and waits for metadata reservation by e.g, waiting for writeback: prealloc_file_extent_cluster() - btrfs_inode_lock(&inode->vfs_inode, 0); - btrfs_prealloc_file_range() ... - btrfs_replace_file_extents() - btrfs_start_transaction ... - btrfs_reserve_metadata_bytes() Thread B (e.g, doing a writeback work) needs to wait for the inode lock to continue writeback process: do_writepages - btrfs_writepages - extent_writpages - btrfs_zoned_data_reloc_lock(BTRFS_I(inode)); - btrfs_inode_lock() The deadlock is caused by relying on the vfs_inode's lock. By using it, we introduced unnecessary exclusion of writeback and btrfs_prealloc_file_range(). Also, the lock at this point is useless as we don't have any dirty pages in the inode yet. Introduce fs_info->zoned_data_reloc_io_lock and use it for the exclusive writeback. Fixes: 35156d852762 ("btrfs: zoned: only allow one process to add pages to a relocation inode") CC: stable@vger.kernel.org # 5.16.x: 869f4cdc73f9: btrfs: zoned: encapsulate inode locking for zoned relocation CC: stable@vger.kernel.org # 5.16.x CC: stable@vger.kernel.org # 5.17 Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
| * | | | btrfs: fix assertion failure during scrub due to block group reallocationFilipe Manana2022-04-212-2/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During a scrub, or device replace, we can race with block group removal and allocation and trigger the following assertion failure: [7526.385524] assertion failed: cache->start == chunk_offset, in fs/btrfs/scrub.c:3817 [7526.387351] ------------[ cut here ]------------ [7526.387373] kernel BUG at fs/btrfs/ctree.h:3599! [7526.388001] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [7526.388970] CPU: 2 PID: 1158150 Comm: btrfs Not tainted 5.17.0-rc8-btrfs-next-114 #4 [7526.390279] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [7526.392430] RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs] [7526.393520] Code: f3 48 c7 c7 20 (...) [7526.396926] RSP: 0018:ffffb9154176bc40 EFLAGS: 00010246 [7526.397690] RAX: 0000000000000048 RBX: ffffa0db8a910000 RCX: 0000000000000000 [7526.398732] RDX: 0000000000000000 RSI: ffffffff9d7239a2 RDI: 00000000ffffffff [7526.399766] RBP: ffffa0db8a911e10 R08: ffffffffa71a3ca0 R09: 0000000000000001 [7526.400793] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa0db4b170800 [7526.401839] R13: 00000003494b0000 R14: ffffa0db7c55b488 R15: ffffa0db8b19a000 [7526.402874] FS: 00007f6c99c40640(0000) GS:ffffa0de6d200000(0000) knlGS:0000000000000000 [7526.404038] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7526.405040] CR2: 00007f31b0882160 CR3: 000000014b38c004 CR4: 0000000000370ee0 [7526.406112] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7526.407148] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7526.408169] Call Trace: [7526.408529] <TASK> [7526.408839] scrub_enumerate_chunks.cold+0x11/0x79 [btrfs] [7526.409690] ? do_wait_intr_irq+0xb0/0xb0 [7526.410276] btrfs_scrub_dev+0x226/0x620 [btrfs] [7526.410995] ? preempt_count_add+0x49/0xa0 [7526.411592] btrfs_ioctl+0x1ab5/0x36d0 [btrfs] [7526.412278] ? __fget_files+0xc9/0x1b0 [7526.412825] ? kvm_sched_clock_read+0x14/0x40 [7526.413459] ? lock_release+0x155/0x4a0 [7526.414022] ? __x64_sys_ioctl+0x83/0xb0 [7526.414601] __x64_sys_ioctl+0x83/0xb0 [7526.415150] do_syscall_64+0x3b/0xc0 [7526.415675] entry_SYSCALL_64_after_hwframe+0x44/0xae [7526.416408] RIP: 0033:0x7f6c99d34397 [7526.416931] Code: 3c 1c e8 1c ff (...) [7526.419641] RSP: 002b:00007f6c99c3fca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [7526.420735] RAX: ffffffffffffffda RBX: 00005624e1e007b0 RCX: 00007f6c99d34397 [7526.421779] RDX: 00005624e1e007b0 RSI: 00000000c400941b RDI: 0000000000000003 [7526.422820] RBP: 0000000000000000 R08: 00007f6c99c40640 R09: 0000000000000000 [7526.423906] R10: 00007f6c99c40640 R11: 0000000000000246 R12: 00007fff746755de [7526.424924] R13: 00007fff746755df R14: 0000000000000000 R15: 00007f6c99c40640 [7526.425950] </TASK> That assertion is relatively new, introduced with commit d04fbe19aefd2 ("btrfs: scrub: cleanup the argument list of scrub_chunk()"). The block group we get at scrub_enumerate_chunks() can actually have a start address that is smaller then the chunk offset we extracted from a device extent item we got from the commit root of the device tree. This is very rare, but it can happen due to a race with block group removal and allocation. For example, the following steps show how this can happen: 1) We are at transaction T, and we have the following blocks groups, sorted by their logical start address: [ bg A, start address A, length 1G (data) ] [ bg B, start address B, length 1G (data) ] (...) [ bg W, start address W, length 1G (data) ] --> logical address space hole of 256M, there used to be a 256M metadata block group here [ bg Y, start address Y, length 256M (metadata) ] --> Y matches W's end offset + 256M Block group Y is the block group with the highest logical address in the whole filesystem; 2) Block group Y is deleted and its extent mapping is removed by the call to remove_extent_mapping() made from btrfs_remove_block_group(). So after this point, the last element of the mapping red black tree, its rightmost node, is the mapping for block group W; 3) While still at transaction T, a new data block group is allocated, with a length of 1G. When creating the block group we do a call to find_next_chunk(), which returns the logical start address for the new block group. This calls returns X, which corresponds to the end offset of the last block group, the rightmost node in the mapping red black tree (fs_info->mapping_tree), plus one. So we get a new block group that starts at logical address X and with a length of 1G. It spans over the whole logical range of the old block group Y, that was previously removed in the same transaction. However the device extent allocated to block group X is not the same device extent that was used by block group Y, and it also does not overlap that extent, which must be always the case because we allocate extents by searching through the commit root of the device tree (otherwise it could corrupt a filesystem after a power failure or an unclean shutdown in general), so the extent allocator is behaving as expected; 4) We have a task running scrub, currently at scrub_enumerate_chunks(). There it searches for device extent items in the device tree, using its commit root. It finds a device extent item that was used by block group Y, and it extracts the value Y from that item into the local variable 'chunk_offset', using btrfs_dev_extent_chunk_offset(); It then calls btrfs_lookup_block_group() to find block group for the logical address Y - since there's currently no block group that starts at that logical address, it returns block group X, because its range contains Y. This results in triggering the assertion: ASSERT(cache->start == chunk_offset); right before calling scrub_chunk(), as cache->start is X and chunk_offset is Y. This is more likely to happen of filesystems not larger than 50G, because for these filesystems we use a 256M size for metadata block groups and a 1G size for data block groups, while for filesystems larger than 50G, we use a 1G size for both data and metadata block groups (except for zoned filesystems). It could also happen on any filesystem size due to the fact that system block groups are always smaller (32M) than both data and metadata block groups, but these are not frequently deleted, so much less likely to trigger the race. So make scrub skip any block group with a start offset that is less than the value we expect, as that means it's a new block group that was created in the current transaction. It's pointless to continue and try to scrub its extents, because scrub searches for extents using the commit root, so it won't find any. For a device replace, skip it as well for the same reasons, and we don't need to worry about the possibility of extents of the new block group not being to the new device, because we have the write duplication setup done through btrfs_map_block(). Fixes: d04fbe19aefd ("btrfs: scrub: cleanup the argument list of scrub_chunk()") CC: stable@vger.kernel.org # 5.17 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
| * | | | btrfs: fix direct I/O writes for split bios on zoned devicesChristoph Hellwig2022-04-191-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a bio is split in btrfs_submit_direct, dip->file_offset contains the file offset for the first bio. But this means the start value used in btrfs_end_dio_bio to record the write location for zone devices is incorrect for subsequent bios. CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
| * | | | btrfs: fix direct I/O read repair for split biosChristoph Hellwig2022-04-193-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a bio is split in btrfs_submit_direct, dip->file_offset contains the file offset for the first bio. But this means the start value used in btrfs_check_read_dio_bio is incorrect for subsequent bios. Add a file_offset field to struct btrfs_bio to pass along the correct offset. Given that check_data_csum only uses start of an error message this means problems with this miscalculation will only show up when I/O fails or checksums mismatch. The logic was removed in f4f39fc5dc30 ("btrfs: remove btrfs_bio::logical member") but we need it due to the bio splitting. CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
| * | | | btrfs: fix and document the zoned device choice in alloc_new_bioChristoph Hellwig2022-04-191-15/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zone Append bios only need a valid block device in struct bio, but not the device in the btrfs_bio. Use the information from btrfs_zoned_get_device to set up bi_bdev and fix zoned writes on multi-device file system with non-homogeneous capabilities and remove the pointless btrfs_bio.device assignment. Add big fat comments explaining what is going on here. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
| * | | | btrfs: fix leaked plug after failure syncing log on zoned filesystemsFilipe Manana2022-04-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a zoned filesystem, if we fail to allocate the root node for the log root tree while syncing the log, we end up returning without finishing the IO plug we started before, resulting in leaking resources as we have started writeback for extent buffers of a log tree before. That allocation failure, which typically is either -ENOMEM or -ENOSPC, is not fatal and the fsync can safely fallback to a full transaction commit. So release the IO plug if we fail to allocate the extent buffer for the root of the log root tree when syncing the log on a zoned filesystem. Fixes: 3ddebf27fcd3a9 ("btrfs: zoned: reorder log node allocation on zoned filesystem") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* | | | | Merge tag 'f2fs-fix-5.18' of ↵Linus Torvalds2022-04-256-151/+27
|\ \ \ \ \ | |_|/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: "This includes major bug fixes introduced in 5.18-rc1 and 5.17+: - Remove obsolete whint_mode (5.18-rc1) - Fix IO split issue caused by op_flags change in f2fs (5.18-rc1) - Fix a wrong condition check to detect IO failure loop (5.18-rc1) - Fix wrong data truncation during roll-forward (5.17+)" * tag 'f2fs-fix-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: should not truncate blocks during roll-forward recovery f2fs: fix wrong condition check when failing metapage read f2fs: keep io_flags to avoid IO split due to different op_flags in two fio holders f2fs: remove obsolete whint_mode
| * | | | f2fs: should not truncate blocks during roll-forward recoveryJaegeuk Kim2022-04-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the file preallocated blocks and fsync'ed, we should not truncate them during roll-forward recovery which will recover i_size correctly back. Fixes: d4dd19ec1ea0 ("f2fs: do not expose unwritten blocks to user by DIO") Cc: <stable@vger.kernel.org> # 5.17+ Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
| * | | | f2fs: fix wrong condition check when failing metapage readJaegeuk Kim2022-04-201-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes wrong initialization. Fixes: 50c63009f6ab ("f2fs: avoid an infinite loop in f2fs_sync_dirty_inodes") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
| * | | | f2fs: keep io_flags to avoid IO split due to different op_flags in two fio ↵Jaegeuk Kim2022-04-201-12/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | holders Let's attach io_flags to bio only, so that we can merge IOs given original io_flags only. Fixes: 64bf0eef0171 ("f2fs: pass the bio operation to bio_alloc_bioset") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
| * | | | f2fs: remove obsolete whint_modeJaegeuk Kim2022-04-203-135/+1
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes obsolete whint_mode. Fixes: 41d36a9f3e53 ("fs: remove kiocb.ki_hint") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
* | | | Merge tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds2022-04-248-66/+52
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ksmbd server fixes from Steve French: - cap maximum sector size reported to avoid mount problems - reference count fix - fix filename rename race * tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION ksmbd: increment reference count of parent fp ksmbd: remove filename in ksmbd_file
| * | | | ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATIONNamjae Jeon2022-04-151-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently ksmbd is using ->f_bsize from vfs_statfs() as sector size. If fat/exfat is a local share, ->f_bsize is a cluster size that is too large to be used as a sector size. Sector sizes larger than 4K cause problem occurs when mounting an iso file through windows client. The error message can be obtained using Mount-DiskImage command, the error is: "Mount-DiskImage : The sector size of the physical disk on which the virtual disk resides is not supported." This patch reports fixed 4KB sector size if ->s_blocksize is bigger than 4KB. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | ksmbd: increment reference count of parent fpNamjae Jeon2022-04-152-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing increment reference count of parent fp in ksmbd_lookup_fd_inode(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | ksmbd: remove filename in ksmbd_fileNamjae Jeon2022-04-158-62/+42
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the filename is change by underlying rename the server, fp->filename and real filename can be different. This patch remove the uses of fp->filename in ksmbd and replace it with d_path(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
* | | | Merge tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-blockLinus Torvalds2022-04-231-4/+7
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull io_uring fixes from Jens Axboe: "Just two small fixes - one fixing a potential leak for the iovec for larger requests added in this cycle, and one fixing a theoretical leak with CQE_SKIP and IOPOLL" * tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-block: io_uring: fix leaks on IOPOLL and CQE_SKIP io_uring: free iovec if file assignment fails
| * | | | io_uring: fix leaks on IOPOLL and CQE_SKIPPavel Begunkov2022-04-171-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If all completed requests in io_do_iopoll() were marked with REQ_F_CQE_SKIP, we'll not only skip CQE posting but also io_free_batch_list() leaking memory and resources. Move @nr_events increment before REQ_F_CQE_SKIP check. We'll potentially return the value greater than the real one, but iopolling will deal with it and the userspace will re-iopoll if needed. In anyway, I don't think there are many use cases for REQ_F_CQE_SKIP + IOPOLL. Fixes: 83a13a4181b0e ("io_uring: tweak iopoll CQE_SKIP event counting") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/5072fc8693fbfd595f89e5d4305bfcfd5d2f0a64.1650186611.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * | | | io_uring: free iovec if file assignment failsJens Axboe2022-04-171-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We just return failure in this case, but we need to release the iovec first. If we're doing IO with more than FAST_IOV segments, then the iovec is allocated and must be freed. Reported-by: syzbot+96b43810dfe9c3bb95ed@syzkaller.appspotmail.com Fixes: 584b0180f0f4 ("io_uring: move read/write file prep state into actual opcode handler") Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | | | | Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds2022-04-238-25/+100
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Fix some syzbot-detected bugs, as well as other bugs found by I/O injection testing. Change ext4's fallocate to consistently drop set[ug]id bits when an fallocate operation might possibly change the user-visible contents of a file. Also, improve handling of potentially invalid values in the the s_overhead_cluster superblock field to avoid ext4 returning a negative number of free blocks" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix a potential race while discarding reserved buffers after an abort ext4: update the cached overhead value in the superblock ext4: force overhead calculation if the s_overhead_cluster makes no sense ext4: fix overhead calculation to account for the reserved gdt blocks ext4, doc: fix incorrect h_reserved size ext4: limit length to bitmap_maxbytes - blocksize in punch_hole ext4: fix use-after-free in ext4_search_dir ext4: fix bug_on in start_this_handle during umount filesystem ext4: fix symlink file size not match to file content ext4: fix fallocate to use file_modified to update permissions consistently
| * | | | | jbd2: fix a potential race while discarding reserved buffers after an abortYe Bin2022-04-211-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | we got issue as follows: [ 72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal [ 72.826847] EXT4-fs (sda): Remounting filesystem read-only fallocate: fallocate failed: Read-only file system [ 74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay [ 74.793597] ------------[ cut here ]------------ [ 74.794203] kernel BUG at fs/jbd2/transaction.c:2063! [ 74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty #150 [ 74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60 [ 74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202 [ 74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90 [ 74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20 [ 74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90 [ 74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00 [ 74.807301] FS: 0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000 [ 74.808338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0 [ 74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 74.811897] Call Trace: [ 74.812241] <TASK> [ 74.812566] __jbd2_journal_refile_buffer+0x12f/0x180 [ 74.813246] jbd2_journal_refile_buffer+0x4c/0xa0 [ 74.813869] jbd2_journal_commit_transaction.cold+0xa1/0x148 [ 74.817550] kjournald2+0xf8/0x3e0 [ 74.819056] kthread+0x153/0x1c0 [ 74.819963] ret_from_fork+0x22/0x30 Above issue may happen as follows: write truncate kjournald2 generic_perform_write ext4_write_begin ext4_walk_page_buffers do_journal_get_write_access ->add BJ_Reserved list ext4_journalled_write_end ext4_walk_page_buffers write_end_fn ext4_handle_dirty_metadata ***************JBD2 ABORT************** jbd2_journal_dirty_metadata -> return -EROFS, jh in reserved_list jbd2_journal_commit_transaction while (commit_transaction->t_reserved_list) jh = commit_transaction->t_reserved_list; truncate_pagecache_range do_invalidatepage ext4_journalled_invalidatepage jbd2_journal_invalidatepage journal_unmap_buffer __dispose_buffer __jbd2_journal_unfile_buffer jbd2_journal_put_journal_head ->put last ref_count __journal_remove_journal_head bh->b_private = NULL; jh->b_bh = NULL; jbd2_journal_refile_buffer(journal, jh); bh = jh2bh(jh); ->bh is NULL, later will trigger null-ptr-deref journal_free_journal_head(jh); After commit 96f1e0974575, we no longer hold the j_state_lock while iterating over the list of reserved handles in jbd2_journal_commit_transaction(). This potentially allows the journal_head to be freed by journal_unmap_buffer while the commit codepath is also trying to free the BJ_Reserved buffers. Keeping j_state_lock held while trying extends hold time of the lock minimally, and solves this issue. Fixes: 96f1e0974575("jbd2: avoid long hold times of j_state_lock while committing a transaction") Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220317142137.1821590-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
| * | | | | ext4: update the cached overhead value in the superblockTheodore Ts'o2022-04-153-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we (re-)calculate the file system overhead amount and it's different from the on-disk s_overhead_clusters value, update the on-disk version since this can take potentially quite a while on bigalloc file systems. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
| * | | | | ext4: force overhead calculation if the s_overhead_cluster makes no senseTheodore Ts'o2022-04-151-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the file system does not use bigalloc, calculating the overhead is cheap, so force the recalculation of the overhead so we don't have to trust the precalculated overhead in the superblock. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-07 07:55:26 +0100