summaryrefslogtreecommitdiffstats
path: root/include/drm/drm_bridge.h (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drm: Plumb debugfs_init through to panelsDouglas Anderson2022-02-161-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | We'd like panels to be able to add things to debugfs underneath the connector's directory. Let's plumb it through. A panel will be able to put things in a "panel" directory under the connector's directory. Note that debugfs is not ABI and so it's always possible that the location that the panel gets for its debugfs could change in the future. NOTE: this currently only works if you're using a modern architecture. Specifically the plumbing relies on _both_ drm_bridge_connector and drm_panel_bridge. If you're not using one or both of these things then things won't be plumbed through. As a side effect of this change, drm_bridges can also get callbacks to put stuff underneath the connector's debugfs directory. At the moment all bridges in the chain have their debugfs_init() called with the connector's root directory. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.2.Ib0bd5346135cbb0b63006b69b61d4c8af6484740@changeid
* drm/bridge: Add stubs for devm_drm_of_get_bridge when OF is disabledMaxime Ripard2021-09-301-1/+12
| | | | | | | | | | | | If CONFIG_OF is disabled, devm_drm_of_get_bridge won't be compiled in and drivers using that function will fail to build. Add an inline stub so that we can still build-test those cases. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://patchwork.freedesktop.org/patch/msgid/20210928181333.1176840-1-maxime@cerno.tech
* drm/msm: allow compile_test on !ARMChristian König2021-09-281-1/+9
| | | | | | | | | | | | | | | | MSM is one of the few drivers which won't even compile test on !ARM platforms. Looking into this a bit more it turned out that there is actually not that much missing to at least let the driver compile on x86 as well. So this patch replaces the use of phys_to_page() with the open coded version and provides a dummy for of_drm_find_bridge(). Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210924071759.22659-2-christian.koenig@amd.com
* drm/bridge: Add a function to abstract away panelsMaxime Ripard2021-09-141-0/+2
| | | | | | | | | | | | | | | Display drivers so far need to have a lot of boilerplate to first retrieve either the panel or bridge that they are connected to using drm_of_find_panel_or_bridge(), and then either deal with each with ad-hoc functions or create a drm panel bridge through drm_panel_bridge_add. In order to reduce the boilerplate and hopefully create a path of least resistance towards using the DRM panel bridge layer, let's create the function devm_drm_of_get_bridge() to reduce that boilerplate. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210910130941.1740182-2-maxime@cerno.tech
* drm: bridge: Mark deprecated operations in drm_bridge_funcsSam Ravnborg2021-07-121-3/+23
| | | | | | | | | | | | | | | | | | | | | | | drm_bridge_funcs includes several duplicated operations as atomic variants have been added over time. New bridge drivers shall use the atomic variants - mark the deprecated operations to try to avoid usage in new bridge drivers. v2: - Drop out-dated comment about state in mode_set (Laurent) - Added missing "the" in a description Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210710084240.281063-1-sam@ravnborg.org
* drm: drm_bridge.h: delete duplicated word in commentRandy Dunlap2020-07-151-1/+1
| | | | | | | | | | | Drop doubled word "should" in a comment. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200715052349.23319-2-rdunlap@infradead.org
* drm: bridge: Pass drm_display_info to drm_bridge_funcs .mode_valid()Laurent Pinchart2020-06-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When validating a mode, bridges may need to do so in the context of a display, as specified by drm_display_info. An example is the meson dw-hdmi bridge that needs to consider the YUV 4:2:0 output format to perform clock calculations. Bridges that need the display info currently retrieve it from the drm_connector created by the bridge. This gets in the way of moving connector creation out of bridge drivers. To make this possible, pass the drm_display_info to drm_bridge_funcs .mode_valid(). Changes to the bridge drivers have been performed with the following coccinelle semantic patch and have been compile-tested. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .mode_valid = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; identifier mode; @@ enum drm_mode_status fn( struct drm_bridge *bridge, + const struct drm_display_info *info, const struct drm_display_mode *mode ) { ... } Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> # for the nwl-dsi part: Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-11-laurent.pinchart+renesas@ideasonboard.com
* drm/bridge: Extend bridge API to disable connector creationLaurent Pinchart2020-02-261-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
* drm/bridge: Add interlace_allowed flag to drm_bridgeLaurent Pinchart2020-02-261-0/+5
| | | | | | | | | | | | | In preparation for a connector creation helper based on a chain of bridges, add a flag to the drm_bridge structure to report support for interlaced modes. This will be used to set the connector's interlace_allowed flag. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-9-laurent.pinchart@ideasonboard.com
* drm/bridge: Add connector-related bridge operations and dataLaurent Pinchart2020-02-261-1/+191
| | | | | | | | | | | | | | | | | | | | | | | | | | | To support implementation of DRM connectors on top of DRM bridges instead of by bridges, the drm_bridge needs to expose new operations and data: - Output detection, hot-plug notification, mode retrieval and EDID retrieval operations - Bitmask of supported operations - Bridge output type - I2C adapter for DDC access Add and document these. Three new bridge helper functions are also added to handle hot plug notification in a way that is as transparent as possible for the bridges. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-8-laurent.pinchart@ideasonboard.com
* drm/bridge: Fix atomic state ops documentationLaurent Pinchart2020-02-261-6/+14
| | | | | | | | | | | | The drm_bridge_funcs atomic_state_duplicate and atomic_state_destroy operations are erroneously documented as having a default implementation if not implemented in bridge drivers. This isn't correct, fix the documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-6-laurent.pinchart@ideasonboard.com
* drm/bridge: Fix the bridge kernel docBoris Brezillon2020-02-181-7/+8
| | | | | | | | | | | | | | | Commit 751465913f04 ("drm/bridge: Add a drm_bridge_state object") introduced new helpers and hooks but the kernel was slightly broken. Fix that now. v2: * Fix the drm_atomic_add_encoder_bridges() doc Fixes: 751465913f04 ("drm/bridge: Add a drm_bridge_state object") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200218151503.595825-1-boris.brezillon@collabora.com
* drm/bridge: Add the necessary bits to support bus format negotiationBoris Brezillon2020-01-311-0/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
* drm/bridge: Add an ->atomic_check() hookBoris Brezillon2020-01-311-1/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So that bridge drivers have a way to check/reject an atomic operation. The drm_atomic_bridge_chain_check() (which is just a wrapper around the ->atomic_check() hook) is called in place of drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented, the core falls back on ->mode_fixup(), so the behavior should stay the same for existing bridge drivers). v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * Fix a NULL pointer dereference v5 -> v6: * No changes v4: * Add R-bs v3: * No changes v2: * Clarify the fact that ->atomic_check() is replacing ->mode_fixup() Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-6-boris.brezillon@collabora.com
* drm/bridge: Patch atomic hooks to take a drm_bridge_stateBoris Brezillon2020-01-311-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This way the drm_bridge_funcs interface is consistent with the rest of the subsystem. The drivers implementing those hooks are patched too. v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * Adjust things to the bridge_state changes v6: * Also fixed rcar-du/rcar_lvds.c same as analogix/analogix_dp_core.c v5: * No changes v4: * Rename func params into old_bridge_state * Add Laurent's Rb v3: * Old state clarification moved to a separate patch v2: * Pass the old bridge state Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable] Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-5-boris.brezillon@collabora.com
* drm/bridge: Add a drm_bridge_state objectBoris Brezillon2020-01-311-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
* Revert "drm/bridge: Add a drm_bridge_state object"Boris Brezillon2020-01-081-114/+0
| | | | | | | | | | | This reverts commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") which introduced a circular dependency between drm.ko and drm_kms_helper.ko. Looks like the helper/core split is not appropriate and fixing that is not simple. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-6-boris.brezillon@collabora.com
* Revert "drm/bridge: Patch atomic hooks to take a drm_bridge_state"Boris Brezillon2020-01-081-4/+4
| | | | | | | | | | | | | This reverts commit f7619a58ef92 ("drm/bridge: Patch atomic hooks to take a drm_bridge_state"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-5-boris.brezillon@collabora.com
* Revert "drm/bridge: Add an ->atomic_check() hook"Boris Brezillon2020-01-081-28/+1
| | | | | | | | | | | | | This reverts commit b86d895524ab ("drm/bridge: Add an ->atomic_check() hook"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-4-boris.brezillon@collabora.com
* Revert "drm/bridge: Add the necessary bits to support bus format negotiation"Boris Brezillon2020-01-081-124/+0
| | | | | | | | | | | | | This reverts commit e351e4d5eaec ("drm/bridge: Add the necessary bits to support bus format negotiation"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-3-boris.brezillon@collabora.com
* drm/bridge: Add the necessary bits to support bus format negotiationBoris Brezillon2020-01-071-0/+124
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-5-narmstrong@baylibre.com
* drm/bridge: Add an ->atomic_check() hookBoris Brezillon2020-01-071-1/+28
| | | | | | | | | | | | | | | | | So that bridge drivers have a way to check/reject an atomic operation. The drm_atomic_bridge_chain_check() (which is just a wrapper around the ->atomic_check() hook) is called in place of drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented, the core falls back on ->mode_fixup(), so the behavior should stay the same for existing bridge drivers). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-4-narmstrong@baylibre.com
* drm/bridge: Patch atomic hooks to take a drm_bridge_stateBoris Brezillon2020-01-071-4/+4
| | | | | | | | | | | | | | | This way the drm_bridge_funcs interface is consistent with the rest of the subsystem. The only driver implementing those hooks (analogix DP) is patched too. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> [narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable] Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-3-narmstrong@baylibre.com
* drm/bridge: Add a drm_bridge_state objectBoris Brezillon2020-01-071-0/+114
| | | | | | | | | | | | | | | | | | One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-2-narmstrong@baylibre.com
* drm: get drm_bridge_panel connector via helperSam Ravnborg2019-12-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The drm_connector created by drm_panel_bridge was accessed via drm_panel.connector. Avoid the detour around drm_panel by providing a simple get method. This avoids direct access to the connector field in drm_panel in the two users. The change is done in preparation for removal of drm_panel.connector. Update pl111 and tve200 to use the new helper. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Eric Anholt <eric@anholt.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-5-sam@ravnborg.org
* drm/bridge: Clarify the atomic enable/disable hooks semanticsBoris Brezillon2019-12-091-4/+4
| | | | | | | | | | The [pre_]enable/[post_]disable hooks are passed the old atomic state. Update the doc and rename the arguments to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-8-boris.brezillon@collabora.com
* drm/bridge: Add the drm_bridge_get_prev_bridge() helperBoris Brezillon2019-12-091-0/+16
| | | | | | | | | | The drm_bridge_get_prev_bridge() helper will be useful for bridge drivers that want to do bus format negotiation with their neighbours. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-7-boris.brezillon@collabora.com
* drm/bridge: Add the drm_for_each_bridge_in_chain() helperBoris Brezillon2019-12-091-0/+11
| | | | | | | | | | To iterate over all bridges attached to a specific encoder. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-6-boris.brezillon@collabora.com
* drm/bridge: Make the bridge chain a double-linked listBoris Brezillon2019-12-091-4/+8
| | | | | | | | | | | So that each element in the chain can easily access its predecessor. This will be needed to support bus format negotiation between elements of the bridge chain. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-5-boris.brezillon@collabora.com
* drm: Stop accessing encoder->bridge directlyBoris Brezillon2019-12-091-0/+15
| | | | | | | | | | | | | | | | | | | We are about to replace the single-linked bridge list by a double-linked one based on list.h, leading to the suppression of the encoder->bridge field. But before we can do that we must provide a drm_bridge_chain_get_first_bridge() bridge helper and patch all drivers and core helpers to use it instead of directly accessing encoder->bridge. Note that we still have 2 drivers (VC4 and Exynos) manipulating the encoder->bridge field directly because they need to cut the bridge chain in order to control the enable/disable sequence. This is definitely not something we want to encourage, so let's keep those 2 oddities around until we find a better solution. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-4-boris.brezillon@collabora.com
* drm/bridge: Introduce drm_bridge_get_next_bridge()Boris Brezillon2019-12-091-0/+13
| | | | | | | | | | | And use it in drivers accessing the bridge->next field directly. This is part of our attempt to make the bridge chain a double-linked list based on the generic list helpers. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-3-boris.brezillon@collabora.com
* drm/bridge: Rename bridge helpers targeting a bridge chainBoris Brezillon2019-12-091-30/+34
| | | | | | | | | | | | Change the prefix of bridge helpers targeting a bridge chain from drm_bridge_ to drm_bridge_chain_ to better reflect the fact that the operation will happen on all elements of chain, starting at the bridge passed in argument. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-2-boris.brezillon@collabora.com
* drm/bridge: Fix references to drm_bridge_funcs in documentationLaurent Pinchart2019-09-131-11/+11
| | | | | | | | | | | The documentation for most of the bridge atomic operations incorrectly reference the non-atomic version when stating the operations are optional. Fix them, and make sure that all references to bridge operations are correctly marked with @. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821235502.15475-1-laurent.pinchart+renesas@ideasonboard.com
* drm/bridge: panel: Infer connector type from panel by defaultLaurent Pinchart2019-09-081-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The drm panel bridge creates a connector using a connector type explicitly passed by the display controller or bridge driver that instantiates the panel bridge. Now that drm_panel reports its connector type, we can use it to avoid passing an explicit (and often incorrect) connector type to drm_panel_bridge_add() and devm_drm_panel_bridge_add(). Several drivers report incorrect or unknown connector types to userspace. Reporting a different type may result in a breakage. For that reason, rename (devm_)drm_panel_bridge_add() to (devm_)drm_panel_bridge_add_typed(), and add new (devm_)drm_panel_bridge_add() functions that use the panel connector type. Update all callers of (devm_)drm_panel_bridge_add() to the _typed function, they will be converted one by one after testing. The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection and fixes to indentation. @@ expression bridge; expression dev; expression panel; identifier type; @@ ( -bridge = drm_panel_bridge_add(panel, type); +bridge = drm_panel_bridge_add_typed(panel, type); | -bridge = devm_drm_panel_bridge_add(dev, panel, type); +bridge = devm_drm_panel_bridge_add_typed(dev, panel, type); ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-3-laurent.pinchart@ideasonboard.com
* Merge tag 'drm-misc-next-2019-06-14' of ↵Daniel Vetter2019-06-141-0/+106
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.3: UAPI Changes: Cross-subsystem Changes: - Add code to signal all dma-fences when freed with pending signals. - Annotate reservation object access in CONFIG_DEBUG_MUTEXES Core Changes: - Assorted documentation fixes. - Use irqsave/restore spinlock to add crc entry. - Move code around to drm_client, for internal modeset clients. - Make drm_crtc.h and drm_debugfs.h self-contained. - Remove drm_fb_helper_connector. - Add bootsplash to todo. - Fix lock ordering in pan_display_legacy. - Support pinning buffers to current location in gem-vram. - Remove the now unused locking functions from gem-vram. - Remove the now unused kmap-object argument from vram helpers. - Stop checking return value of debugfs_create. - Add atomic encoder enable/disable helpers. - pass drm_atomic_state to atomic connector check. - Add atomic support for bridge enable/disable. - Add self refresh helpers to core. Driver Changes: - Add extra delay to make MTP SDM845 work. - Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip. - Add zpos and ?BGR8888 support to meson. - More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis. - Allow synopsis to unwedge the i2c hdmi bus. - Add orientation quirks for GPD panels. - Edid cleanups and fixing handling for edid < 1.2. - Add runtime pm to stm. - Handle s/r in dw-hdmi. - Add hooks for power on/off to dsi for stm. - Remove virtio dirty tracking code, done in drm core. - Rework BO handling in ast and mgag200. Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c, needed #include <linux/slab.h> to make it compile. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0e01de30-9797-853c-732f-4a5bd6e61445@linux.intel.com
| * drm: Add atomic variants for bridge enable/disableSean Paul2019-06-131-0/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds atomic variants for all of pre_enable/enable/disable/post_disable bridge functions. These will be called from the appropriate atomic helper functions. If the bridge driver doesn't implement the atomic version of the function, we will fall back to the vanilla implementation. Note that some drivers call drm_bridge_disable directly, and these cases are not covered. It's up to the driver to decide whether to implement both atomic_disable and disable, or if it's not necessary. Changes in v3: - Added to the patchset Changes in v4: - Fix up docbook references (Daniel) Changes in v5: - None Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-4-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-4-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-4-sean@poorly.run
* | drm: bridge: Add dual_link field to the drm_bridge_timings structureLaurent Pinchart2019-06-081-0/+8
|/ | | | | | | | | | | | Extend the drm_bridge_timings structure with a new dual_link field to indicate that the bridge's input bus carries data on two separate physical links. The first use case is LVDS dual-link mode where even- and odd-numbered pixels are transferred on separate LVDS links. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
* drm/bridge: use bus flags in bridge timingsStefan Agner2019-03-181-7/+5
| | | | | | | | | | | | | | | The DRM bus flags convey additional information on pixel data on the bus. All current available bus flags might be of interest for a bridge. Remove the sampling_edge field and use bus_flags. In the case at hand a dumb VGA bridge needs a specific data enable polarity (DRM_BUS_FLAG_DE_LOW). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flagsLaurent Pinchart2019-03-181-4/+5
| | | | | | | | | | | | | | | | | | The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them through the code. This effectively changes the value of the .sampling_edge bridge timings field in the dumb-vga-dac driver. This is safe to do as no driver consumes these values yet. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* drm: bridge: Constify mode arguments to bridge .mode_set() operationLaurent Pinchart2019-01-141-4/+4
| | | | | | | | | The mode and ajusted_mode passed to the bridge .mode_set() operation should never be modified by the bridge (and are not in any of the existing bridge drivers). Make them const to make this clear. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/bridge: Move the struct drm_bridge member kerneldoc inline.Eric Anholt2018-06-211-10/+12
| | | | | | | | This makes it more likely that the docs stay updated with the code. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180606190431.1833-1-eric@anholt.net Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
* drm/bridge: spelling and coding style minor fixesPhilippe Cornu2018-05-171-5/+5
| | | | | | | | Minor fixes detected with "scripts/checkpatch.pl --strict" Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180515203736.9224-1-philippe.cornu@st.com
* drm: clarify adjusted_mode documentation for bridgesPhilippe Cornu2018-05-151-0/+16
| | | | | | | | | | This patch clarifies the adjusted_mode documentation for bridges. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180409152427.12449-1-philippe.cornu@st.com
* drm/bridge: Rename argument from crtc to bridgeLinus Walleij2018-02-071-1/+1
| | | | | | | | | Why is the argument to ->mode_valid() called "crtc"? I guess a copy/paste error. Fix it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180129095531.4557-1-linus.walleij@linaro.org
* drm/bridge: Provide a way to embed timing info in bridgesLinus Walleij2018-01-121-0/+33
| | | | | | | | | | | | | After some discussion and failed patch sets trying to convey the right timing information between the display engine and a bridge using the connector, I try instead to use an optional timing information container in the bridge itself, so that display engines can retrieve it from any bridge and use it to determine how to drive outputs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180112074854.9560-2-linus.walleij@linaro.org
* drm/bridge: change return type of drm_bridge_add functionInki Dae2017-08-211-1/+1
| | | | | | | | | | | This patch changes return type of drm_bridge_add function. This function never return negative value but returns only 0. So it changes the return type of this function to void one. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/1499071350-25168-2-git-send-email-inki.dae@samsung.com
* drm/bridge: Add a devm_ allocator for panel bridge.Eric Anholt2017-07-261-0/+3
| | | | | | | | | | | | | This will let drivers reduce the error cleanup they need, in particular the "is_panel_bridge" flag. v2: Slight cleanup of remove function by Andrzej Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170718210510.12229-2-eric@anholt.net
* drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.Eric Anholt2017-06-051-0/+7
| | | | | | | | | | | | | | | | | | | | | Many DRM drivers have common code to make a stub connector implementation that wraps a drm_panel. By wrapping the panel in a DRM bridge, all of the connector code (including calls during encoder enable/disable) goes away. v2: Fix build with CONFIG_DRM=m, drop "dev" argument that should just be the panel's dev, move kerneldoc up a level and document _remove(). v3: Fix another breakage with CONFIG_DRM=m, fix breakage with CONFIG_OF=n, move protos under CONFIG_DRM_PANEL_BRIDGE, wrap a line. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1) Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> (v2) Acked-by: Archit Taneja <architt@codeaurora.org> (v2) Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170602202514.11900-1-eric@anholt.net
* drm: Introduce drm_bridge_mode_valid()Jose Abreu2017-05-301-0/+2
| | | | | | | | | | | | | | | | | Introduce a new helper function which calls mode_valid() callback for all bridges in an encoder chain. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/36bd5e054496ad3c9c71f1ffe204f28533f55f1e.1495720737.git.joabreu@synopsys.com
* drm/doc: Document adjusted/request modes a bit betterDaniel Vetter2017-05-231-1/+1
| | | | | | | | | | | | | | | Laurent started a massive discussion on IRC about this. Let's try to document common usage a bit better. v2: Cross-links+typos. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170515091136.26307-1-daniel.vetter@ffwll.ch
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 10:23:24 +0100