summaryrefslogtreecommitdiffstats
path: root/include/sound/hdaudio.h (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda: Add helper macros for DSP capable devicesCezary Rojewski2022-03-111-0/+3
| | | | | | | | | | | | HDAudio drivers make heavy use of I/O operations. Declare a range of update, read and write helpers similar to those available for HDAudio legacy driver. These macros are used by AVS driver to improve code readability. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220311153544.136854-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.cPierre-Louis Bossart2021-12-251-0/+1
| | | | | | | | | | | | | | | | snd_hdac_ext_stop_streams() has really nothing to do with the extension, it just loops over the bus streams. Move it to the hdac_stream layer and rename to remove the 'ext' prefix and add the precision that the chip will also be stopped. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20211216231128.344321-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: add link_power op to hdac_bus_opsKai Vehmanen2021-02-081-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | The extended HDA bus (hdac_ext) provides interfaces for more fine-grained control of individual links than what plain HDA provides for. Links can be powered off when they are not used and if all links are released, controller can shut down the command DMA. These interfaces are currently not used by common HDA codec drivers. When a HDA codec is runtime suspended, it calls snd_hdac_codec_link_down(), but there is no link to the HDA extended bus, and on controller side the links are shut down only when all codecs are suspended. This patch adds link_power() to hdac_bus ops. Controllers using the HDA extended core, can use this to plug in snd_hdac_ext_bus_link_power() to implement more fine-grained control of link power. No change is needed for plain HDA controllers nor to existing HDA codec drivers. Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210205184630.1938761-2-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Add dma stop delay variableMohan Kumar2020-08-051-0/+3
| | | | | | | | | | | | A variable dma_stop_delay is added as a new member in hdac_bus structure to avoid memory decode error incase DMA RUN bit is not disabled in the given timeout from snd_hdac_stream_sync function and followed by stream reset which results in memory decode error between reset set and clear operation. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Link: https://lore.kernel.org/r/20200805095221.5476-3-mkumard@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Unexport some local helper functionsTakashi Iwai2020-05-161-3/+0
| | | | | | | | | snd_hdac_bus_queue_event() and snd_hdac_bus_exec_verb() are used only internally in HD-audio core. Let's drop the exports and move the declarations into local.h. Link: https://lore.kernel.org/r/20200516062854.22141-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Return true,false for return type boolJason Yan2020-05-061-2/+2
| | | | | | | | | | | | | Fix the following coccicheck warning: include/sound/hdaudio.h:210:73-74: WARNING: return of 0/1 in function 'snd_hdac_is_in_pm' with return type bool include/sound/hdaudio.h:211:76-77: WARNING: return of 0/1 in function 'snd_hdac_is_power_on' with return type bool Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200506061716.19209-1-yanaijie@huawei.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: add member to store ratio for stripe controlSameer Pujar2020-05-041-0/+3
| | | | | | | | | | | | | | | Stripe control programming is governed by following formula, which is referenced from the HD Audio specification(Revision 1.0a). { ((num_channels * bits_per_sample) / number of SDOs) >= 8 } Currently above is implemented in snd_hdac_get_stream_stripe_ctl(). This patch introduces a structure member to store the default factor of '8'. If any HW wants to use a different value, this member can be easily updated. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1588580176-2801-3-git-send-email-spujar@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ASoC: SOF: Intel: Account for compress streams when servicing IRQsCezary Rojewski2020-02-181-0/+2
| | | | | | | | | | Update stream irq handler definition to correctly set hdac_stream current position when servicing stream interrupts for compress streams. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200218143924.10565-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge branch 'for-linus' into for-nextTakashi Iwai2020-01-201-24/+53
|\ | | | | | | | | | | Resolved the merge conflict in HD-audio Tegra driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda: Apply aligned MMIO access only conditionallyTakashi Iwai2020-01-201-24/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turned out that the recent simplification of HD-audio bus access helpers caused a regression on the virtual HD-audio device on QEMU with ARM platforms. The driver got a CORB/RIRB timeout and couldn't probe any codecs. The essential difference that caused a problem was the enforced aligned MMIO accesses by simplification. Since snd-hda-tegra driver is enabled on ARM, it enables CONFIG_SND_HDA_ALIGNED_MMIO, which makes the all HD-audio drivers using the aligned MMIO accesses. While this is mandatory for snd-hda-tegra, it seems that snd-hda-intel on ARM gets broken by this access pattern. For addressing the regression, this patch introduces a new flag, aligned_mmio, to hdac_bus object, and applies the aligned MMIO only when this flag is set. This change affects only platforms with CONFIG_SND_HDA_ALIGNED_MMIO set, i.e. mostly only for ARM platforms. Unfortunately the patch became a big bigger than it should be, just because the former calls didn't take hdac_bus object in the argument, hence we had to extend the call patterns. Fixes: 19abfefd4c76 ("ALSA: hda: Direct MMIO accesses") BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1161152 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200120104127.28985-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda: Manage concurrent reg access more properlyTakashi Iwai2020-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the commit 8e85def5723e ("ALSA: hda: enable regmap internal locking"), we re-enabled the regmap lock due to the reported regression that showed the possible concurrent accesses. It was a temporary workaround, and there are still a few opened races even after the revert. In this patch, we cover those still opened windows with a proper mutex lock and disable the regmap internal lock again. First off, the patch introduces a new snd_hdac_device.regmap_lock mutex that is applied for each snd_hdac_regmap_*() call, including read, write and update helpers. The mutex is applied carefully so that it won't block the self-power-up procedure in the helper function. Also, this assures the protection for the accesses without regmap, too. The snd_hdac_regmap_update_raw() is refactored to use the standard regmap_update_bits_check() function instead of the open-code. The non-regmap case is still open-coded but it's an easy part. The all read and write operations are in the single mutex protection, so it's now race-free. In addition, a couple of new helper functions are added: snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both are called from HD-audio legacy driver. The former is to initialize the given verb bits but only once when it's not initialized yet. Due to this condition, the function invokes regcache_cache_only(), and it's now performed inside the regmap_lock (formerly it was racy) too. The latter function is for simply invoking regcache_sync() inside the regmap_lock, which is called from the codec resume call path. Along with that, the HD-audio codec driver code is slightly modified / simplified to adapt those new functions. And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are rewritten with the helper macro. It's just for simplification because the code logic is identical among all those functions. Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda: Unify get_response handlingTakashi Iwai2019-12-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now most of the get_response handling became quite similar between HDA-core and legacy drivers, and the only differences are: - the handling of extra-long polling delay for some codecs - the debug message for the stalled communication and both are worth to share in the common code. This patch unifies the code into snd_hdac_bus_get_response(), and use this from the legacy get_response callback. It results in a good amount of code reduction in the end. Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191212191101.19517-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda: Use standard waitqueue for RIRB wakeupTakashi Iwai2019-12-101-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HD-audio CORB/RIRB communication was programmed in a way that was documented in the reference in decades ago, which is essentially a polling in the waiter side. It's working fine but costs CPU cycles on some platforms that support only slow communications. Also, for some platforms that had unreliable communications, we put longer wait time (2 ms), which accumulate quite long time if you execute many verbs in a shot (e.g. at the initialization or resume phase). This patch attempts to improve the situation by introducing the standard waitqueue in the RIRB waiter side instead of polling. The test results on my machine show significant improvements. The time spent for "cat /proc/asound/card*/codec#*" were changed like: * Intel SKL + Realtek codec before the patch: 0.00user 0.04system 0:00.10elapsed 40.0%CPU after the patch: 0.00user 0.01system 0:00.10elapsed 10.0%CPU * Nvidia GP107GL + Nvidia HDMI codec before the patch: 0.00user 0.00system 0:02.76elapsed 0.0%CPU after the patch: 0.00user 0.00system 0:00.01elapsed 17.0%CPU So, for Intel chips, the total time is same, while the total time is greatly reduced (from 2.76 to 0.01s) for Nvidia chips. The only negative data here is the increase of CPU time for Nvidia, but this is the unavoidable cost for faster wakeups, supposedly. Link: https://lore.kernel.org/r/20191210145727.22054-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Modify stream stripe mask only when neededTakashi Iwai2019-12-031-0/+1
| | | | | | | | | | | | | | | | | | | The recent commit in HD-audio stream management for changing the stripe control seems causing a regression on some platforms. The stripe control is currently used only by HDMI codec, and applying the stripe mask unconditionally may lead to scratchy and static noises as seen on some MacBooks. For addressing the regression, this patch changes the stream management code to apply the stripe mask conditionally only when the codec driver requested. Fixes: 9b6f7e7a296e ("ALSA: hda: program stripe bits for controller") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477 Tested-by: Michael Pobega <mpobega@neverware.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191202074947.1617-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Unexport a few more stuffTakashi Iwai2019-08-141-6/+0
| | | | | | | | | Drop EXPORT_SYMBOL*() from a few more stuff in HD-audio core that aren't used outside. Particular the unsol event handler can be staticized now because the recent change removed all external callers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Drop export of snd_hdac_bus_add/remove_device()Takashi Iwai2019-08-141-3/+0
| | | | | | | | snd_hdac_bus_add_device() and snd_hdac_remove_device() are called only internally in hda-core. Let's drop the exports of them and move the declarations into local.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Direct MMIO accessesTakashi Iwai2019-08-081-33/+30
| | | | | | | | | | | | | | | | | | | | | | | | | HD-audio drivers access to the mmio registers indirectly via the corresponding bus->io_ops callbacks. This is because some platform (notably Tegra SoC) requires the word-aligned access. But it's rather a rare case, and other platforms suffer from the penalties by indirect calls unnecessarily. This patch is an attempt to optimize and cleanup for this situation. Now the special aligned access is used only when a new kconfig CONFIG_SND_HDA_ALIGNED_MMIO is set. And the HD-audio core itself provides the aligned MMIO access helpers instead of the driver side. If Kconfig isn't set (as default), the standard helpers like readl() or writel() are used directly. A couple of places in ASoC Intel drivers have the access via io_ops reg_writel(), and they are replaced with the direct writel() calls. And now with this patch, the whole bus->io_ops becomes empty, so it's dropped completely. The bus initialization functions are changed accordingly as well to drop the whole bus->io_ops. Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Remove page allocation redirectionTakashi Iwai2019-08-081-5/+1
| | | | | | | | | | | | | | | | | | | | | | | The HD-audio core allocates and releases pages via driver's specific dma_alloc_pages and dma_free_pages ops defined in bus->io_ops. This was because some platforms require the uncached pages and the handling of page flags had to be done locally in the driver code. Since the recent change in ALSA core memory allocator, we can simply pass SNDRV_DMA_TYPE_DEV_UC for the uncached pages, and the only difference became about this type to be passed to the core allocator. That is, it's good time for cleaning up the mess. This patch changes the allocation code in HD-audio core to call the core allocator directly so that we get rid of dma_alloc_pages and dma_free_pages io_ops. If a driver needs the uncached pages, it has to set bus->dma_type right after the bus initialization. This is merely a code refactoring and shouldn't bring any behavior changes. Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/hda-refresh-cleanup' into for-nextTakashi Iwai2019-07-071-1/+1
|\ | | | | | | | | | | Merge a cleanup for HD-audio widget refresh code Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda: Simplify snd_hdac_refresh_widgets()Takashi Iwai2019-07-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Along with the recent fix for the races of snd_hdac_refresh_widgets() it turned out that the instantiation of widgets sysfs at snd_hdac_sysfs_reinit() could cause a race. The race itself was already covered later by extending the mutex protection range, the commit 98482377dc72 ("ALSA: hda: Fix widget_mutex incomplete protection"), but this also indicated that the call of *_reinit() is basically superfluous, as the widgets shall be created sooner or later from snd_hdac_device_register(). This patch removes the redundant call of snd_hdac_sysfs_reinit() at first. By this removal, the sysfs argument itself in snd_hdac_refresh_widgets() becomes superfluous, too, because the only case sysfs=false is always with codec->widgets=NULL. So, we drop this redundant argument as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda: move polling_mode flag to struct hdac_busBard Liao2019-05-281-0/+3
|/ | | | | | | | | | polling mode is a useful function in the get_response function. Move polling_mode flag from struct azx to struct hdac_bus so people can implement polling mode in their own get_response function without adding a polling_mode flag in their local chip structure. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'sound-fix-5.2-rc1' of ↵Linus Torvalds2019-05-171-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few HD-audio fixes, most of which are specific to Realtek codecs" * tag 'sound-fix-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix for Lenovo B50-70 inverted internal microphone bug ALSA: hda: Fix race between creating and refreshing sysfs entries ALSA: hda/realtek - Corrected fixup for System76 Gazelle (gaze14) ALSA: hda/realtek - Avoid superfluous COEF EAPD setups ALSA: hda/realtek - Fixup headphone noise via runtime suspend
| * ALSA: hda: Fix race between creating and refreshing sysfs entriesAmadeusz Sławiński2019-05-131-0/+1
| | | | | | | | | | | | | | | | | | | | hda_widget_sysfs_reinit() can free underlying codec->widgets structure on which widget_tree_create() operates. Add locking to prevent such issues from happening. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110382 Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge tag 'sound-5.2-rc1' of ↵Linus Torvalds2019-05-091-4/+3
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The most significant changes at this cycle are the Sound Open Firmware support from Intel for the common DSP framework along with its support for Intel platforms. It's a door opened to a real "free" firmware (in the sense of FOSS), and other parties show interests in it. In addition to SOF, we've got a bunch of updates and fixes as usual. Some highlights are below. ALSA core: - Cleanups and fixes in ALSA timer code to cover some races spotted by syzkaller - Cleanups and fixes in ALSA sequencer code to cover some races, again unsurprisingly, spotted by syzkaller - Optimize the common page allocation helper with alloc_pages_exact() ASoC: - Add SOF core support, as well as Intel SOF platform support - Generic card driver improvements: support for MCLK/sample rate ratio and pin switches - A big set of improvements to TLV320AIC32x4 drivers - New drivers for Freescale audio mixers, several Intel machines, several Mediatek machines, Meson G12A, Spreadtrum compressed audio and DMA devices HD-audio: - A few Realtek codec fixes for reducing pop noises - Quirks for Chromebooks - Workaround for faulty connection report on AMD/Nvidia HDMI Others: - A quirk for Focusrite Scarlett Solo USB-audio - Add support for MOTU 8pre FireWire - 24bit sample format support in aloop - GUS patch format support (finally, over a decade) in native emux synth code" * tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits) ASoC: SOF: Fix unused variable warnings ALSA: line6: toneport: Fix broken usage of timer for delayed execution ALSA: aica: Fix a long-time build breakage ALSA: hda/realtek - Support low power consumption for ALC256 ASoC: stm32: i2s: update pcm hardware constraints ASoC: codec: hdac_hdmi: no checking monitor in hw_params ASoC: mediatek: mt6358: save PGA for mixer control ASoC: mediatek: mt6358: save output volume for mixer controls ASoC: mediatek: mt6358: initialize setting when ramping volume ASoC: SOF: core: fix undefined nocodec reference ASoC: SOF: xtensa: fix undefined references ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14) ALSA: hda/intel: add CometLake PCI IDs ALSA: hda/realtek - Support low power consumption for ALC295 ASoC: rockchip: Fix an uninitialized variable compile warning ASoC: SOF: Fix a compile warning with CONFIG_PCI=n ASoC: da7219: Fix a compile warning at CONFIG_COMMON_CLK=n ASoC: sound/soc/sof/: fix kconfig dependency warning ASoC: stm32: spdifrx: change trace level on iec control ...
| * ALSA: hda: Initialize ext-bus-specific fields in snd_hdac_bus_init(), tooTakashi Iwai2019-04-131-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Some fields in snd_hdac_bus are ext-bus specific, but they still should be initialized in snd_hdac_bus_init() for consistency, at least, for the ones that do need the explicit initialization like the list head. Also move the lock field to the more appropriate place and correct the comment to reflect the recent change where it serves for both the display power and the link management. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge tag 'drm-intel-next-2019-03-20' of ↵Dave Airlie2019-03-251-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Report an error early instead of SIGBUS later when mmap beyond BO size Core Changes: - This includes backmerge of drm-next and two merges of Maarten's topic/hdr-formats Driver Changes: - Add Comet Lake (Gen9) PCI IDs to Coffee Lake ID list (Anusha) - Add missing ICL PCI ID (Jose) - Fix legacy gamma mode for ICL (Ville) - Assume eDP is present on port A when there is no VBT (Thomas) - Corrections to eDP training patterns (Jose) - Fix PSR2 selective update corruption after PSR1 setup (Jose) - Fix CRC mismatch error for DP link layer compliance (Aditya) - Fix CNL DPLL readout and clean up code (Ville) - Turn off the CUS when turning off a HDR plane (Ville) - Avoid a race with execlist tasklet during race (Chris) - Add missing CSC readout and clean up code (Ville) - Avoid unnecessary wakeref during debugfs/drop_caches/set (Chris, Caz) - Hold references to ring/HW context/context explicitly when used (Chris) - Assume next platforms inherit old platform (Rodrigo) - Use HWS indices rather than addresses for breadcrumbs (Chris) - Add REG_BIT/REG_GENMASK and REG_FIELD_PREP macros (Jani) - Convert crept in C99 types to kernel fixed size types (Jani) - Avoid passing full dev_priv in forcewake functions (Daniele) - Reset GuC on GPU reset (Sujaritha) - Rework MG and Combo PLLs to vfuncs (Lucas) - Explicitly track ppGTT size (Chris, Bob) - Coding style improvements and code modularization (Ville) - Selftest and debugging improvements (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/intel_hdmi.c From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325124925.GA12726@jlahtine-desk.ger.corp.intel.com
| * snd/hda, drm/i915: Track the display_power_status using a cookieChris Wilson2019-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drm/i915 is tracking all wakeref owners with a cookie in order to identify leaks. To that end, each rpm acquisition ops->get_power is assigned a cookie which should be passed to ops->put_power to signify its release (and removal from the list of wakeref owners). As snd/hda is already using a bool to track current status of display_power extending that to an unsigned long to hold the boolean cookie is a trivial extension, and will quell all doubt that snd/hda is the cause of the device runtime pm leaks. v2: Keep using the power abstraction for local wakeref tracking. v3: BUILD_BUG_ON impedance mismatch Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190213152109.16997-1-chris@chris-wilson.co.uk
* | ALSA: hda: Add api to program stripe control bitsSameer Pujar2019-01-141-0/+3
|/ | | | | | | | | | | | | | | | | Controllers and codecs can support striping of audio out across multiple SDO lines. The number of supported SDO lines can be specific to chip. GCAP register can be read to know the maximum supported SDO lines. snd_hdac_get_stream_stripe_ctl() is exposed to program stripe bits on controller and codec side. stripe value: 0 for 1SDO, 1 for 2SDO, 2 for 4SDO lines, etc., Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selectionPierre-Louis Bossart2018-12-191-0/+6
| | | | | | | | | | | | | | | | | | | | | For HDaudio and Skylake drivers, add module parameter "pci_binding" When pci_binding == 0 (AUTO), the PCI class/subclass info is used to select drivers based on the presence of the DSP. pci_binding == 1 (LEGACY) forces the use of the HDAudio legacy driver, even if the DSP is present. pci_binding == 2 (ASOC) forces the use of the ASOC driver. The information on the DSP presence is bypassed. The value for the module parameter needs to be identical for both drivers. This parameter is intended as a back-up solution if the automatic detection fails or when the DSP usage fails. Such cases should be reported on the alsa-devel mailing list for analysis. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: HDA: export process_unsol_events()Keyon Jie2018-12-191-0/+1
| | | | | | | | | | | The SOF implementation does not rely on the hdac_bus library, however for HDMI and HDaudio codec support it does need to deal with unsolicited events. Instead of re-inventing the wheel, export this symbol to reuse this part of the library directly. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Refactor display power managementTakashi Iwai2018-12-111-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current HD-audio code manages the DRM audio power via too complex redirections, and this seems even still unbalanced in a corner case as Intel DRM CI has been intermittently reporting. This patch is a big surgery for addressing the complexity and the possible unbalance. Basically the patch changes the display PM in the following ways: - Both HD-audio controller and codec drivers call a single helper, snd_hdac_display_power(). (Formerly, the display power control from a codec was done indirectly via link_power bus ops.) - snd_hdac_display_power() receives the codec address index. For turning on/off from the controller, pass HDA_CODEC_IDX_CONTROLLER. - snd_hdac_display_power() doesn't manage refcounts any longer, but keeps the power status in bitmap. If any of controller or codecs is turned on, the function updates the DRM power state via get_power() or put_power(). Also this refactor allows us more cleanup: - The link_power bus ops is dropped, so there is no longer indirect management, as mentioned in the above. - hdac_device link_power_control flag is moved to hda_codec display_power_control flag, as it's only for HDA legacy. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106525 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-v4.19-rc4' of ↵Takashi Iwai2018-09-171-0/+1
|\ | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.19 This is the usual set of small fixes scatterd around various drivers, plus one fix for DAPM and a UAPI build fix. There's not a huge amount that stands out here relative to anything else.
| * sound: don't call skl_init_chip() to reset intel skl socYu Zhao2018-09-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which 1) sets bus->chip_init to prevent multiple entrances before device is stopped; 2) enables interrupt. We shouldn't use it for the purpose of resetting device only because 1) when we really want to initialize device, we won't be able to do so; 2) we are ready to handle interrupt yet, and kernel crashes when interrupt comes in. Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset device properly. Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | ALSA: hda: Fix implicit PCM format type conversionTakashi Iwai2018-07-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | The PCM format type is defined with __bitwise, hence it can't be passed as integer but needs an explicit cast. In this patch, instead of the messy cast flood, define the format argument of snd_hdac_calc_stream_format() to be the proper snd_pcm_format_t type. This fixes sparse warnings like: sound/hda/hdac_device.c:760:38: warning: incorrect type in argument 1 (different base types) Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'topic/drm_audio_component' into for-nextTakashi Iwai2018-07-191-3/+3
|\| | | | | | | | | | | | | Pull the generic drm_audio_component support, which will be used later for AMD/ATI and other HD-audio HDMI codec drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * drm/i915: Split audio component to a generic typeTakashi Iwai2018-07-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For allowing other drivers to use the DRM audio component, rename the i915_audio_component_* with drm_audio_component_*, and split the generic part into drm_audio_component.h. The i915 specific stuff remains in struct i915_audio_component, which contains drm_audio_component as the base. The license of drm_audio_component.h is kept to MIT as same as the the original i915_component.h. This is a preliminary change for further development, and no functional changes by this patch itself, merely code-split and renames. v1->v2: Use SPDX for drm_audio_component.h, fix remaining i915 argument in drm_audio_component.h Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'topic/hda-core-intel' into for-nextTakashi Iwai2018-07-031-0/+29
|\| | | | | | | | | | | Merge the development branch for HD-audio ext bus refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hdac: add extended ops in the hdac_busRakesh Ughreja2018-06-281-0/+9
| | | | | | | | | | | | | | | | | | | | | | Add extended ops in the hdac_bus to allow calling the ASoC HDAC library ops to reuse the legacy HDA codec drivers with ASoC framework. Extended ops are used by the legacy codec drivers to call into hdac_hda library, in the subsequent patches.. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hdac: Remove usage of struct hdac_ext_driver, use hdac_driver insteadRakesh Ughreja2018-06-281-0/+5
| | | | | | | | | | | | | | | | | | This patch removes the hdac_ext_driver structure. The legacy and enhanced HDaudio capabilities can be handled in a backward-compatible way without separate definitions. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hdac: Remove usage of struct hdac_ext_bus and use hdac_bus insteadRakesh Ughreja2018-06-281-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes the hdac_ext_bus structure. The legacy and enhanced HDaudio capabilities can be handled in a backward-compatible way without separate definitions. Follow-up patches in this series handle the driver definition. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Move in_pm accessors to HDA coreTakashi Iwai2018-06-281-0/+27
|/ | | | | | | | | | | | | | | | | The in_pm atomic in hdac_device is an important field used as a flag as well as a refcount for PM. The existing snd_hdac_power_up/down helpers already refer to it in the HD-audio core code, while the code to actually setting the value (atomic_inc() / _dec()) is open-coded in HDA legacy side, which is hard to find. This patch adds the helper functions to set/reset the in_pm counter to HDA core and use them in HDA legacy side, for making it clearer who / where the PM is managed. There is no functional changes, just code refactoring. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Use a macro for snd_array iteration loopsTakashi Iwai2018-04-241-0/+5
| | | | | | | | | | | | Introduce a new helper macro, snd_array_for_each(), to iterate for each snd_array element. It slightly improves the readability than lengthy open codes at each place. Along with it, add const prefix to some obvious places. There should be no functional changes by this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'sound-4.17-rc1' of ↵Linus Torvalds2018-04-051-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This became a large update. The changes are scattered widely, and the majority of them are attributed to ASoC componentization. The gitk output made me dizzy, but it's slightly better than London tube. OK, below are some highlights: - Continued hardening works in ALSA PCM core; most of the existing syzkaller reports should have been covered. - USB-audio got the initial USB Audio Class 3 support, as well as UAC2 jack detection support and more DSD-device support. - ASoC componentization: finally each individual driver was converted to components framework, which is more future-proof for further works. Most of conversations were systematic. - Lots of fixes for Intel Baytrail / Cherrytrail devices with Realtek codecs, typically tablets and small PCs. - Fixes / cleanups for Samsung Odroid systems - Cleanups in Freescale SSI driver - New ASoC drivers: * AKM AK4458 and AK5558 codecs * A few AMD based machine drivers * Intel Kabylake machine drivers * Maxim MAX9759 codec * Motorola CPCAP codec * Socionext Uniphier SoCs * TI PCM1789 and TDA7419 codecs - Retirement of Blackfin drivers along with architecture removal" * tag 'sound-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (497 commits) ALSA: pcm: Fix UAF at PCM release via PCM timer access ALSA: usb-audio: silence a static checker warning ASoC: tscs42xx: Remove owner assignment from i2c_driver ASoC: mediatek: remove "simple-mfd" in the example ASoC: cpcap: replace codec to component ASoC: Intel: bytcr_rt5651: don't use codec anymore ASoC: amd: don't use codec anymore ALSA: usb-audio: fix memory leak on cval ALSA: pcm: Fix mutex unbalance in OSS emulation ioctls ASoC: topology: Fix kcontrol name string handling ALSA: aloop: Mark paused device as inactive ALSA: usb-audio: update clock valid control ALSA: usb-audio: UAC2 jack detection ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams ALSA: pcm: Avoid potential races between OSS ioctls and read/write ALSA: usb-audio: Integrate native DSD support for ITF-USB based DACs. ALSA: usb-audio: FIX native DSD support for TEAC UD-501 DAC ALSA: usb-audio: Add native DSD support for Luxman DA-06 ALSA: usb-audio: fix uac control query argument ASoC: nau8824: recover system clock when device changes ...
| * ALSA: hda: Copying sync power state helper to coreAbhijeet Kumar2018-02-121-0/+2
| | | | | | | | | | | | | | | | | | The current sync_power_state is local to hda code, moving it core so that other users apart from hda legacy can use it. The helper function ensures the actual state reaches the target state. Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | vga_switcheroo: Use device link for HDA controllerLukas Wunner2018-03-131-3/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Back in 2013, runtime PM for GPUs with integrated HDA controller was introduced with commits 0d69704ae348 ("gpu/vga_switcheroo: add driver control power feature. (v3)") and 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)"). Briefly, the idea was that the HDA controller is forced on and off in unison with the GPU. The original code is mostly still in place even though it was never a 100% perfect solution: E.g. on access to the HDA controller, the GPU is powered up via vga_switcheroo_runtime_resume_hdmi_audio() but there are no provisions to keep it resumed until access to the HDA controller has ceased: The GPU autosuspends after 5 seconds, rendering the HDA controller inaccessible. Additionally, a kludge is required when hda_intel.c probes: It has to check whether the GPU is powered down (check_hdmi_disabled()) and defer probing if so. However in the meantime (in v4.10) the driver core has gained a feature called device links which promises to solve such issues in a clean way: It allows us to declare a dependency from the HDA controller (consumer) to the GPU (supplier). The PM core then automagically ensures that the GPU is runtime resumed as long as the HDA controller's ->probe hook is executed and whenever the HDA controller is accessed. By default, the HDA controller has a dependency on its parent, a PCIe Root Port. Adding a device link creates another dependency on its sibling: PCIe Root Port ^ ^ | | | | HDA ===> GPU The device link is not only used for runtime PM, it also guarantees that on system sleep, the HDA controller suspends before the GPU and resumes after the GPU, and on system shutdown the HDA controller's ->shutdown hook is executed before the one of the GPU. It is a complete solution. Using this functionality is as simple as calling device_link_add(), which results in a dmesg entry like this: pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 The code for the GPU-governed audio power management can thus be removed (except where it's still needed for legacy manual power control). The device link is added in a PCI quirk rather than in hda_intel.c. It is therefore legal for the GPU to runtime suspend to D3cold even if the HDA controller is not bound to a driver or if CONFIG_SND_HDA_INTEL is not enabled, for accesses to the HDA controller will cause the GPU to wake up regardless if they're occurring outside of hda_intel.c (think config space readout via sysfs). Contrary to the previous implementation, the HDA controller's power state is now self-governed, rather than GPU-governed, whereas the GPU's power state is no longer fully self-governed. (The HDA controller needs to runtime suspend before the GPU can.) It is thus crucial that runtime PM is always activated on the HDA controller even if CONFIG_SND_HDA_POWER_SAVE_DEFAULT is set to 0 (which is the default), lest the GPU stays awake. This is achieved by setting the auto_runtime_pm flag on every codec and the AZX_DCAPS_PM_RUNTIME flag on the HDA controller. A side effect is that power consumption might be reduced if the GPU is in use but the HDA controller is not, because the HDA controller is now allowed to go to D3hot. Before, it was forced to stay in D0 as long as the GPU was in use. (There is no reduction in power consumption on my Nvidia GK107, but there might be on other chips.) The code paths for legacy manual power control are adjusted such that runtime PM is disabled during power off, thereby preventing the PM core from resuming the HDA controller. Note that the device link is not only added on vga_switcheroo capable systems, but for *any* GPU with integrated HDA controller. The idea is that the HDA controller streams audio via connectors located on the GPU, so the GPU needs to be on for the HDA controller to do anything useful. This commit implicitly fixes an unbalanced runtime PM ref upon unbind of hda_intel.c: On ->probe, a runtime PM ref was previously released under the condition "azx_has_pm_runtime(chip) || hda->use_vga_switcheroo", but on ->remove a runtime PM ref was only acquired under the first of those conditions. Thus, binding and unbinding the driver twice on a vga_switcheroo capable system caused the runtime PM refcount to drop below zero. The issue is resolved because the AZX_DCAPS_PM_RUNTIME flag is now always set if use_vga_switcheroo is true. For more information on device links please refer to: https://www.kernel.org/doc/html/latest/driver-api/device_link.html Documentation/driver-api/device_link.rst Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Tested-by: Kai Heng Feng <kai.heng.feng@canonical.com> # AMD PowerXpress Tested-by: Mike Lothian <mike@fireburn.co.uk> # AMD PowerXpress Tested-by: Denis Lisov <dennis.lissov@gmail.com> # Nvidia Optimus Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/51bd38360ff502a8c42b1ebf4405ee1d3f27118d.1520068884.git.lukas@wunner.de
* Merge tag 'asoc-v4.15' of ↵Takashi Iwai2017-11-131-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model thanks to some dedicated and persistent work from Robert Jarzmik. - Continued work from Morimoto-san on moving us towards being able to use components for everything. - Lots of cleanups for the Intel platform code, including support for their open source audio firmware. - Support for scaling MCLK with sample rate in simple-card. - Support for AMD Stoney platform.
| * License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | ALSA: hda: Avoid racy recreation of widget kobjectsTakashi Iwai2017-10-191-2/+1
|/ | | | | | | | | | | | | | | | | | | | | | | The refresh of HD-audio widget sysfs kobjects via snd_hdac_refresh_widget_sysfs() is slightly racy. The driver recreates the whole tree from scratch after deleting the whole. When CONFIG_DEBUG_KOBJECT_RELEASE option is used, kobject release doesn't happen immediately but delayed, while the re-creation of the same named kobject happens soon after invoking kobject_put(). This may end up with the conflicts of duplicated kobjects, as found in the bug report below. In this patch, we take another approach to refresh the tree: instead of recreating the whole tree, just add the new nodes and delete the non-existing nodes. Since the refresh happens only once at initialization, no longer race would happen. Along with the code change, merge snd_hdac_refresh_widget_sysfs() with the existing snd_hdac_refresh_widgets() with an additional bool flag for simplifying the code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197307 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Avoid tricky macrosTakashi Iwai2017-04-031-10/+18
| | | | | | | | | | | | | The macros _snd_hdac_chip_read() and *_write() expand to different types (b,w,l) per their argument. They were thought to be used only internally for other snd_hdac_chip_*() macros, but in some situations we need to call these directly, and they are way too ugly. Instead of saving a few lines, we just write these macros explicitly with the types, so that they can be used in a saner way. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - move bus_parse_capabilities to coreVinod Koul2016-08-091-0/+13
| | | | | | | | | HDA capability introduced recently are move to hdac core so that it can be used by legacy driver as well. Also move the capability pointers up to hdac_bus object. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 21:17:34 +0100