summaryrefslogtreecommitdiffstats
path: root/kernel/irq (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Improve behaviour of spurious IRQ detectAlan Cox2007-07-161-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we handle spurious IRQ activity based upon seeing a lot of invalid interrupts, and we clear things back on the base of lots of valid interrupts. Unfortunately in some cases you get legitimate invalid interrupts caused by timing asynchronicity between the PCI bus and the APIC bus when disabling interrupts and pulling other tricks. In this case although the spurious IRQs are not a problem our unhandled counters didn't clear and they act as a slow running timebomb. (This is effectively what the serial port/tty problem that was fixed by clearing counters when registering a handler showed up) It's easy enough to add a second parameter - time. This means that if we see a regular stream of harmless spurious interrupts which are not harming processing we don't go off and do something stupid like disable the IRQ after a month of running. OTOH lockups and performance killers show up a lot more than 10/second [akpm@linux-foundation.org: cleanup] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix crash with irqpoll due to the IRQF_IRQPOLL flag testingLinus Torvalds2007-05-241-9/+37
| | | | | | | | | | | | | | | | | | | With irqpoll enabled, trying to test the IRQF_IRQPOLL flag in the actions would cause a NULL pointer dereference if no action was installed (for example, the driver might have been unloaded with interrupts still pending). So be a bit more careful about testing the flag by making sure to test for that case. (The actual _change_ is trivial, the patch is more than a one-liner because I rewrote the testing to also be much more readable. Original (discarded) bugfix by Bernhard Walle. Cc: Bernhard Walle <bwalle@suse.de> Tested-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [IA64] SN: validate smp_affinity mask on intr redirectJohn Keller2007-05-111-0/+7
| | | | | | | | | | | | On SN, only allow one bit to be set in the smp_affinty mask when redirecting an interrupt. Currently setting multiple bits is allowed, but only the first bit is used in determining the CPU to redirect to. This has caused confusion among some customers. [akpm@linux-foundation.org: fixes] Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
* Fix Linuxdoc commentJeff Dike2007-05-091-1/+0
| | | | | | | | | A linuxdoc comment had fallen out of date - it refers to an argument which no longer exists. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add IRQF_IRQPOLL flag (common code)Bernhard Walle2007-05-082-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | irqpoll is broken on some architectures that don't use the IRQ 0 for the timer interrupt like IA64. This patch adds a IRQF_IRQPOLL flag. Each architecture is handled in a separate pach. As I left the irq == 0 as condition, this should not break existing architectures that use timer_irq == 0 and that I did't address with that patch (because I don't know). This patch: This patch adds a IRQF_IRQPOLL flag that the interrupt registration code could use for the interrupt it wants to use for IRQ polling. Because this must not be the timer interrupt, an additional flag was added instead of re-using the IRQF_TIMER constant. Until all architectures will have an IRQF_IRQPOLL interrupt, irq == 0 will stay as alternative as it should not break anything. Also, note_interrupt() is called on CPU-specific interrupts to be used as interrupt source for IRQ polling. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Grant Grundler <grundler@google.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Pad irq_desc to internode cacheline sizeRavikiran G Thirumalai2007-05-081-1/+1
| | | | | | | | | | | | | | | | | | We noticed a drop in n/w performance due to the irq_desc being cacheline aligned rather than internode aligned. We see 50% of expected performance when two e1000 nics local to two different nodes have consecutive irq descriptors allocated, due to false sharing. Note that this patch does away with cacheline padding for the UP case, as it does not seem useful for UP configurations. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* IRQ: check for PERCPU flag only when adding first irqactionAhmed S. Darwish2007-05-081-4/+6
| | | | | | | | | | | | | An irqaction structure won't be added to an IRQ descriptor irqaction list if it doesn't agree with other irqactions on the IRQF_PERCPU flag. Don't check for this flag to change IRQ descriptor `status' for every irqaction added to the list, Doing the check only for the first irqaction added is enough. Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kernel/irq/proc.c: unprotected iteration over the IRQ action list in ↵Dmitry Adamushko2007-05-081-4/+11
| | | | | | | | | | | | | | | name_unique() setup_irq() releases a desc->lock before calling register_handler_proc(), so the iteration over the IRQ action list is not protected. (akpm: the check itself is still racy, but at least it probably won't oops now). Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* MSI: arch must connect the irq and the msi_descMichael Ellerman2007-05-031-0/+3
| | | | | | | | | | | | | | | | | | | | set_irq_msi() currently connects an irq_desc to an msi_desc. The archs call it at some point in their setup routine, and then the generic code sets up the reverse mapping from the msi_desc back to the irq. set_irq_msi() should do both connections, making it the one and only call required to connect an irq with it's MSI desc and vice versa. The arch code MUST call set_irq_msi(), and it must do so only once it's sure it's not going to fail the irq allocation. Given that there's no need for the arch to return the irq anymore, the return value from the arch setup routine just becomes 0 for success and anything else for failure. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] irq-devres: fix failure path of devm_request_irq()Tejun Heo2007-04-071-1/+1
| | | | | | | | | | devres should be deallocated with devres_free() not kfree(). This bug corrupts slab on IRQ request failure. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] genirq: Mask irqs when migrating them.Eric W. Biederman2007-02-261-5/+4
| | | | | | | | | | | | | | | | | | | | | move_native_irqs tries to do the right thing when migrating irqs by disabling them. However disabling them is a software logical thing, not a hardware thing. This has always been a little flaky and after Ingo's latest round of changes it is guaranteed to not mask the apic. So this patch fixes move_native_irq to directly call the mask and unmask chip methods to guarantee that we mask the irq when we are migrating it. We must do this as it is required by all code that call into the path. Since we don't know the masked status when IRQ_DISABLED is set so we will not be able to restore it. The patch makes the code just give up and trying again the next time this routing is called. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] small irq management simplificationJan Beulich2007-02-161-4/+2
| | | | | | | | | | Use mask_ack_irq() where possible. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] IRQ kernel-doc fixesRandy Dunlap2007-02-161-1/+1
| | | | | | | | Fix kernel-doc warnings in IRQ management. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] genirq: do not mask interrupts by defaultIngo Molnar2007-02-161-7/+10
| | | | | | | | | | | | | | | | Never mask interrupts immediately upon request. Disabling interrupts in high-performance codepaths is rare, and on the other hand this change could recover lost edges (or even other types of lost interrupts) by conservatively only masking interrupts after they happen. (NOTE: with this change the highlevel irq-disable code still soft-disables this IRQ line - and if such an interrupt happens then the IRQ flow handler keeps the IRQ masked.) Mark i8529A controllers as 'never loses an edge'. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Add a function to handle interrupt affinity settingThomas Gleixner2007-02-162-21/+41
| | | | | | | | | | | | | | | | | Provide funtions to: - check, whether an interrupt can set the affinity - pin the interrupt to a given cpu Necessary for the ability to setup clocksources more flexible (e.g. use the different HPET channels per CPU) [akpm@osdl.org: alpha build fix] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Add irq flag to disable balancing for an interruptThomas Gleixner2007-02-162-1/+5
| | | | | | | | | | | | | | | Add a flag so we can prevent the irq balancing of an interrupt. Move the bits, so we have room for more :) Necessary for the ability to setup clocksources more flexible (e.g. use the different HPET channels per CPU) Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner2007-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] kernel: shut up the IRQ mismatch messagesAlan Cox2007-02-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | The problem is various drivers legally validly and sensibly try to claim IRQs but the kernel insists on vomiting forth a giant irrelevant debugging spew when the types clash. Edit kernel/irq/manage.c go down to mismatch: in setup_irq() and ifdef out the if clause that checks for mismatches. It'll then just do the right thing and work sanely. For the current -mm kernel this will do the trick (and moves it into shared irq debugging as in debug mode the info spew is useful). I've had a variant of this in my private tree for some time as I got fed up on the mess on boxes where old legacy IRQs get reused. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Debug shared irqsDavid Woodhouse2007-02-121-0/+33
| | | | | | | | | | | | | | | | Drivers registering IRQ handlers with SA_SHIRQ really ought to be able to handle an interrupt happening before request_irq() returns. They also ought to be able to handle an interrupt happening during the start of their call to free_irq(). Let's test that hypothesis.... [bunk@stusta.de: Kconfig fixes] Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] sort the devres mess outAl Viro2007-02-113-87/+89
| | | | | | | | | | | | | * Split the implementation-agnostic stuff in separate files. * Make sure that targets using non-default request_irq() pull kernel/irq/devres.o * Introduce new symbols (HAS_IOPORT and HAS_IOMEM) defaulting to positive; allow architectures to turn them off (we needed these symbols anyway for dependencies of quite a few drivers). * protect the ioport-related parts of lib/devres.o with CONFIG_HAS_IOPORT. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] proc: remove useless (and buggy) ->nlink settingsAlexey Dobriyan2007-02-111-1/+0
| | | | | | | | | | | | | | | | | | | | | Bug: pnx8550 code creates directory but resets ->nlink to 1. create_proc_entry() et al will correctly set ->nlink for you. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Corey Minyard <minyard@acm.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* devres: device resource managementTejun Heo2007-02-091-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement device resource management, in short, devres. A device driver can allocate arbirary size of devres data which is associated with a release function. On driver detach, release function is invoked on the devres data, then, devres data is freed. devreses are typed by associated release functions. Some devreses are better represented by single instance of the type while others need multiple instances sharing the same release function. Both usages are supported. devreses can be grouped using devres group such that a device driver can easily release acquired resources halfway through initialization or selectively release resources (e.g. resources for port 1 out of 4 ports). This patch adds devres core including documentation and the following managed interfaces. * alloc/free : devm_kzalloc(), devm_kzfree() * IO region : devm_request_region(), devm_release_region() * IRQ : devm_request_irq(), devm_free_irq() * DMA : dmam_alloc_coherent(), dmam_free_coherent(), dmam_declare_coherent_memory(), dmam_pool_create(), dmam_pool_destroy() * PCI : pcim_enable_device(), pcim_pin_device(), pci_is_managed() * iomap : devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(), devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(), pcim_iomap(), pcim_iounmap() Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* msi: Kill the msi_desc array.Eric W. Biederman2007-02-081-0/+28
| | | | | | | | | | | | | | | | | | | We need to be able to get from an irq number to a struct msi_desc. The msi_desc array in msi.c had several short comings the big one was that it could not be used outside of msi.c. Using irq_data in struct irq_desc almost worked except on some architectures irq_data needs to be used for something else. So this patch adds a msi_desc pointer to irq_desc, adds the appropriate wrappers and changes all of the msi code to use them. The dynamic_irq_init/cleanup code was tweaked to ensure the new field is left in a well defined state. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Clear spurious irq stat information when adding irq handlerLinus Torvalds2007-01-231-0/+3
| | | | | | | | | | | | | Any newly added irq handler may obviously make any old spurious irq status invalid, since the new handler may well be the thing that is supposed to handle any interrupts that came in. So just clear the statistics when adding handlers. Pointed-out-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] x86-64: Make noirqdebug_setup function non init to fix modpost warningVivek Goyal2007-01-111-1/+1
| | | | | | | | | | | | | | | | o noirqdebug_setup() is __init but it is being called by quirk_intel_irqbalance() which if of type __devinit. If CONFIG_HOTPLUG=y, quirk_intel_irqbalance() is put into text section and it is wrong to call a function in __init section. o MODPOST flags this on i386 if CONFIG_RELOCATABLE=y WARNING: vmlinux - Section mismatch: reference to .init.text:noirqdebug_setup from .text between 'quirk_intel_irqbalance' (at offset 0xc010969e) and 'i8237A_suspend' o Make noirqdebug_setup() non-init. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] genirq: fix irq flow handler uninstallThomas Gleixner2006-12-221-2/+1
| | | | | | | | | | | | | | The sanity check for no_irq_chip in __set_irq_hander() is unconditional on both install and uninstall of an handler. This triggers false warnings and replaces no_irq_chip by dummy_irq_chip in the uninstall case. Check only, when a real handler is installed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] __set_irq_handler bogus spaceGeert Uytterhoeven2006-12-211-1/+1
| | | | | | | __set_irq_handler: Kill a bogus space Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] CPEI gets warning at kernel/irq/migration.c:27/move_masked_irq()Hidetoshi Seto2006-12-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While running my MCA test (hardware error injection) on 2.6.19, I got some warning like following: > BUG: warning at kernel/irq/migration.c:27/move_masked_irq() > > Call Trace: > [<a000000100013d20>] show_stack+0x40/0xa0 > sp=e00000006b2578d0 bsp=e00000006b2510b0 > [<a000000100013db0>] dump_stack+0x30/0x60 > sp=e00000006b257aa0 bsp=e00000006b251098 > [<a0000001000de430>] move_masked_irq+0xb0/0x240 > sp=e00000006b257aa0 bsp=e00000006b251070 > [<a0000001000de6a0>] move_native_irq+0xe0/0x180 > sp=e00000006b257aa0 bsp=e00000006b251040 > [<a00000010004ff50>] iosapic_end_level_irq+0x30/0xe0 > sp=e00000006b257aa0 bsp=e00000006b251020 > [<a0000001000d94d0>] __do_IRQ+0x170/0x400 > sp=e00000006b257aa0 bsp=e00000006b250fd8 > [<a0000001000116f0>] ia64_handle_irq+0x1b0/0x260 > sp=e00000006b257aa0 bsp=e00000006b250fa8 > [<a00000010000c3a0>] ia64_leave_kernel+0x0/0x280 > sp=e00000006b257aa0 bsp=e00000006b250fa8 > [<a000000100690cf0>] _spin_unlock_irqrestore+0x30/0x60 > sp=e00000006b257c70 bsp=e00000006b250f90 It comes from: [kernel/irq/migration.c] 26 if (CHECK_IRQ_PER_CPU(desc->status)) { 27 WARN_ON(1); 28 return; 29 } By putting some printk in kernel, I found that irqbalance is trying to move CPEI which is handled as PER_CPU irq. That's why. CPEI(Corrected Platform Error Interrupt) is ia64 specific irq, is allowed to pin to particular processor which selected by the platform, and even it is PER_CPU but it has set_affinity handler (=iosapic_set_affinity) as same as other IO-SAPIC-level interrupts. (I don't know why, but I guess that there would be typical situation where the handler for migration is needed, such as hotplug - the processor going to be offline/hot-removed.) To shut up this warning, there are 2 way at least: a) fix CPEI stuff b) prohibit setting affinity to PER_CPU irq I'm not sure what stuff of CPEI need to be fixed, but I think that returning error to attempting move PER_CPU irq is useful for all applications since it will never work. Following small patch takes b) style. It works, the warning disappeared and irqbalance still runs well. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Arjan van de Ven <arjan@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lockdep: name some old style locksPeter Zijlstra2006-12-071-1/+1
| | | | | | | | | Name some of the remaning 'old_style_spin_init' locks Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Don't call "note_interrupt()" with irq descriptor lock heldLinus Torvalds2006-11-222-7/+3
| | | | | | | | | | | | | | | | | | | This reverts commit f72fa707604c015a6625e80f269506032d5430dc, and solves the problem that it tried to fix by simply making "__do_IRQ()" call the note_interrupt() function without the lock held, the way everybody else does. It should be noted that all interrupt handling code must never allow the descriptor actors to be entered "recursively" (that's why we do all the magic IRQ_PENDING stuff in the first place), so there actually is exclusion at that much higher level, even in the absense of locking. Acked-by: Vivek Goyal <vgoyal@in.ibm.com> Acked-by:Pavel Emelianov <xemul@openvz.org> Cc: Andrew Morton <akpm@osdl.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] some irq_chip variables point to NULLZhang, Yanmin2006-11-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I got an oops when booting 2.6.19-rc5-mm1 on my ia64 machine. Below is the log. Oops 11012296146944 [1] Modules linked in: binfmt_misc dm_mirror dm_multipath dm_mod thermal processor f an container button sg eepro100 e100 mii Pid: 0, CPU 0, comm: swapper psr : 0000121008022038 ifs : 800000000000040b ip : [<a0000001000e1411>] Not tainted ip is at __do_IRQ+0x371/0x3e0 unat: 0000000000000000 pfs : 000000000000040b rsc : 0000000000000003 rnat: 656960155aa56aa5 bsps: a00000010058b890 pr : 656960155aa55a65 ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c0270033f csd : 0000000000000000 ssd : 0000000000000000 b0 : a0000001000e1390 b6 : a0000001005beac0 b7 : e00000007f01aa00 f6 : 000000000000000000000 f7 : 0ffe69090000000000000 f8 : 1000a9090000000000000 f9 : 0ffff8000000000000000 f10 : 1000a908ffffff6f70000 f11 : 1003e0000000000000909 r1 : a000000100fbbff0 r2 : 0000000000010002 r3 : 0000000000010001 r8 : fffffffffffbffff r9 : a000000100bd8060 r10 : a000000100dd83b8 r11 : fffffffffffeffff r12 : a000000100bcbbb0 r13 : a000000100bc4000 r14 : 0000000000010000 r15 : 0000000000010000 r16 : a000000100c01aa8 r17 : a000000100d2c350 r18 : 0000000000000000 r19 : a000000100d2c300 r20 : a000000100c01a88 r21 : 0000000080010100 r22 : a000000100c01ac0 r23 : a0000001000108e0 r24 : e000000477980004 r25 : 0000000000000000 r26 : 0000000000000000 r27 : e00000000913400c r28 : e0000004799ee51c r29 : e0000004778b87f0 r30 : a000000100d2c300 r31 : a00000010005c7e0 Call Trace: [<a000000100014600>] show_stack+0x40/0xa0 sp=a000000100bcb760 bsp=a000000100bc4f40 [<a000000100014f00>] show_regs+0x840/0x880 sp=a000000100bcb930 bsp=a000000100bc4ee8 [<a000000100037fb0>] die+0x250/0x320 sp=a000000100bcb930 bsp=a000000100bc4ea0 [<a00000010005e5f0>] ia64_do_page_fault+0x8d0/0xa20 sp=a000000100bcb950 bsp=a000000100bc4e50 [<a00000010000caa0>] ia64_leave_kernel+0x0/0x290 sp=a000000100bcb9e0 bsp=a000000100bc4e50 [<a0000001000e1410>] __do_IRQ+0x370/0x3e0 sp=a000000100bcbbb0 bsp=a000000100bc4df0 [<a000000100011f50>] ia64_handle_irq+0x170/0x220 sp=a000000100bcbbb0 bsp=a000000100bc4dc0 [<a00000010000caa0>] ia64_leave_kernel+0x0/0x290 sp=a000000100bcbbb0 bsp=a000000100bc4dc0 [<a000000100012390>] ia64_pal_call_static+0x90/0xc0 sp=a000000100bcbd80 bsp=a000000100bc4d78 [<a000000100015630>] default_idle+0x90/0x160 sp=a000000100bcbd80 bsp=a000000100bc4d58 [<a000000100014290>] cpu_idle+0x1f0/0x440 sp=a000000100bcbe20 bsp=a000000100bc4d18 [<a000000100009980>] rest_init+0xc0/0xe0 sp=a000000100bcbe20 bsp=a000000100bc4d00 [<a0000001009f8ea0>] start_kernel+0x6a0/0x6c0 sp=a000000100bcbe20 bsp=a000000100bc4ca0 [<a0000001000089f0>] __end_ivt_text+0x6d0/0x6f0 sp=a000000100bcbe30 bsp=a000000100bc4c00 <0>Kernel panic - not syncing: Aiee, killing interrupt handler! The root cause is that some irq_chip variables, especially ia64_msi_chip, initiate their memeber end to point to NULL. __do_IRQ doesn't check if irq_chip->end is null and just calls it after processing the interrupt. As irq_chip->end is called at many places, so I fix it by reinitiating irq_chip->end to dummy_irq_chip.end, e.g., a noop function. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] setup_irq(): better mismatch debuggingAndrew Morton2006-11-141-2/+7
| | | | | | | | | | | When we get a mismatch between handlers on the same IRQ, all we get is "IRQ handler type mismatch for IRQ n". Let's print the name of the presently-registered handler with which we got the mismatch. Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix misrouted interrupts deadlocksPavel Emelianov2006-11-131-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While testing kernel on machine with "irqpoll" option I've caught such a lockup: __do_IRQ() spin_lock(&desc->lock); desc->chip->ack(); /* IRQ is ACKed */ note_interrupt() misrouted_irq() handle_IRQ_event() if (...) local_irq_enable_in_hardirq(); /* interrupts are enabled from now */ ... __do_IRQ() /* same IRQ we've started from */ spin_lock(&desc->lock); /* LOCKUP */ Looking at misrouted_irq() code I've found that a potential deadlock like this can also take place: 1CPU: __do_IRQ() spin_lock(&desc->lock); /* irq = A */ misrouted_irq() for (i = 1; i < NR_IRQS; i++) { spin_lock(&desc->lock); /* irq = B */ if (desc->status & IRQ_INPROGRESS) { 2CPU: __do_IRQ() spin_lock(&desc->lock); /* irq = B */ misrouted_irq() for (i = 1; i < NR_IRQS; i++) { spin_lock(&desc->lock); /* irq = A */ if (desc->status & IRQ_INPROGRESS) { As the second lock on both CPUs is taken before checking that this irq is being handled in another processor this may cause a deadlock. This issue is only theoretical. I propose the attached patch to fix booth problems: when trying to handle misrouted IRQ active desc->lock may be unlocked. Acked-by: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] genirq: clean up irq-flow-type namingIngo Molnar2006-10-171-24/+9
| | | | | | | | | | | | | Introduce desc->name and eliminate the handle_irq_name() hack. Add set_irq_chip_and_handler_name() to set the flow type and name at once. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Matthew Wilcox <willy@debian.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] bitmap: parse input from kernel and user buffersReinette Chatre2006-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | lib/bitmap.c:bitmap_parse() is a library function that received as input a user buffer. This seemed to have originated from the way the write_proc function of the /proc filesystem operates. This has been reworked to not use kmalloc and eliminates a lot of get_user() overhead by performing one access_ok before using __get_user(). We need to test if we are in kernel or user space (is_user) and access the buffer differently. We cannot use __get_user() to access kernel addresses in all cases, for example in architectures with separate address space for kernel and user. This function will be useful for other uses as well; for example, taking input for /sysfs instead of /proc, so it was changed to accept kernel buffers. We have this use for the Linux UWB project, as part as the upcoming bandwidth allocator code. Only a few routines used this function and they were changed too. Signed-off-by: Reinette Chatre <reinette.chatre@linux.intel.com> Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Cc: Paul Jackson <pj@sgi.com> Cc: Joe Korty <joe.korty@ccur.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ixp4xxdefconfig arm fixesFrederik Deweerdt2006-10-061-1/+1
| | | | | | | | With the following patch, the ixp4xxdefconfig builds correctly. I'll test some more configs if I get some time. Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-053-37/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* IRQ: Typedef the IRQ handler function typeDavid Howells2006-10-051-3/+1
| | | | | | | Typedef the IRQ handler function type. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1356d1e5fd256997e3d3dce0777ab787d0515c7a commit)
* IRQ: Typedef the IRQ flow handler function typeDavid Howells2006-10-051-9/+3
| | | | | | | Typedef the IRQ flow handler function type. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 8e973fbdf5716b93a0a8c0365be33a31ca0fa351 commit)
* [PATCH] msi: simplify msi sanity checks by adding with generic irq codeEric W. Biederman2006-10-041-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently msi.c is doing sanity checks that make certain before an irq is destroyed it has no more users. By adding irq_has_action I can perform the test is a generic way, instead of relying on a msi specific data structure. By performing the core check in dynamic_irq_cleanup I ensure every user of dynamic irqs has a test present and we don't free resources that are in use. In msi.c this allows me to kill the attrib.state member of msi_desc and all of the assciated code to maintain it. To keep from freeing data structures when irq cleanup code is called to soon changing dyanamic_irq_cleanup is insufficient because there are msi specific data structures that are also not safe to free. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] genirq: irq: add a dynamic irq creation APIEric W. Biederman2006-10-041-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] genirq: irq: add moved_masked_irqEric W. Biederman2006-10-041-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently move_native_irq disables and renables the irq we are migrating to ensure we don't take that irq when we are actually doing the migration operation. Disabling the irq needs to happen but sometimes doing the work is move_native_irq is too late. On x86 with ioapics the irq move sequences needs to be: edge_triggered: mask irq. move irq. unmask irq. ack irq. level_triggered: mask irq. ack irq. move irq. unmask irq. We can easily perform the edge triggered sequence, with the current defintion of move_native_irq. However the level triggered case does not map well. For that I have added move_masked_irq, to allow me to disable the irqs around both the ack and the move. Q: Why have we not seen this problem earlier? A: The only symptom I have been able to reproduce is that if we change the vector before acknowleding an irq the wrong irq is acknowledged. Since we currently are not reprogramming the irq vector during migration no problems show up. We have to mask the irq before we acknowledge the irq or else we could hit a window where an irq is asserted just before we acknowledge it. Edge triggered irqs do not have this problem because acknowledgements do not propogate in the same way. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] genirq: irq: convert the move_irq flag from a 32bit word to a single bitEric W. Biederman2006-10-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The primary aim of this patchset is to remove maintenances problems caused by the irq infrastructure. The two big issues I address are an artificially small cap on the number of irqs, and that MSI assumes vector == irq. My primary focus is on x86_64 but I have touched other architectures where necessary to keep them from breaking. - To increase the number of irqs I modify the code to look at the (cpu, vector) pair instead of just looking at the vector. With a large number of irqs available systems with a large irq count no longer need to compress their irq numbers to fit. Removing a lot of brittle special cases. For acpi guys the result is that irq == gsi. - Addressing the fact that MSI assumes irq == vector takes a few more patches. But suffice it to say when I am done none of the generic irq code even knows what a vector is. In quick testing on a large Unisys x86_64 machine we stumbled over at least one driver that assumed that NR_IRQS could always fit into an 8 bit number. This driver is clearly buggy today. But this has become a class of bugs that it is now much easier to hit. This patch: This is a minor space optimization. In practice I don't think this has any affect because of our alignment constraints and the other fields but there is not point in chewing up an uncessary word and since we already read the flag field this should improve the cache hit ratio of the irq handler. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] irq: remove a extra lineYoichi Yuasa2006-09-291-4/+0
| | | | | | Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] irq: fixed coding styleYoichi Yuasa2006-09-291-1/+1
| | | | | | Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] FRV: permit __do_IRQ() to be dispensed withDavid Howells2006-09-261-0/+2
| | | | | | | | | | | Permit __do_IRQ() to be dispensed with based on a configuration option. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] genirq core: fix handle_level_irq()Ingo Molnar2006-09-191-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | while porting the -rt tree to 2.6.18-rc7 i noticed the following screaming-IRQ scenario on an SMP system: 2274 0Dn.:1 0.001ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.010ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.020ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.029ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.039ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.048ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.058ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.068ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.077ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.087ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.097ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) as it turns out, the bug is caused by handle_level_irq(), which if it races with another CPU already handling this IRQ, it _unmasks_ the IRQ line on the way out. This is not how 2.6.17 works, and we introduced this bug in one of the early genirq cleanups right before it went into -mm. (the bug was not in the genirq patchset for a long time, and we didnt notice the bug due to the lack of -rt rebase to the new genirq code. -rt, and hardirq-preemption in particular opens up such races much wider than anything else.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] genirq: fix typo in IRQ resendImre Deak2006-09-161-2/+1
| | | | | | | | | | | Fix a bug where the IRQ_PENDING flag is never cleared and the ISR is called endlessly without an actual interrupt. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kerneldoc for handle_bad_irq()Henrik Kretzschmar2006-09-011-0/+5
| | | | | | | | Adds the description of the parameters from handle_bad_irq(). Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] genirq: {en,dis}able_irq_wake() need refcounting tooDavid Brownell2006-07-311-2/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | IRQs need refcounting and a state flag to track whether the the IRQ should be enabled or disabled as a "normal IRQ" source after a series of calls to {en,dis}able_irq(). For shared IRQs, the IRQ must be enabled so long as at least one driver needs it active. Likewise, IRQs need the same support to track whether the IRQ should be enabled or disabled as a "wakeup event" source after a series of calls to {en,dis}able_irq_wake(). For shared IRQs, the IRQ must be enabled as a wakeup source during sleep so long as at least one driver needs it. But right now they _don't have_ that refcounting ... which means sharing a wakeup-capable IRQ can't work correctly in some configurations. This patch adds the refcount and flag mechanisms to set_irq_wake() -- which is what {en,dis}able_irq_wake() call -- and minimal documentation of what the irq wake mechanism does. Drivers relying on the older (broken) "toggle" semantics will trigger a warning; that'll be a handful of drivers on ARM systems. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 18:38:06 +0100