| Commit message (Collapse) | Author | Files | Lines |
|---|
|
The rcar-du KMS driver will call drm_plane_create_zpos_property() with an
init value depending on the plane type.
Since the initial value wasn't carried over in the state, the driver had
to set it again in rcar_du_plane_reset() and rcar_du_vsp_plane_reset().
However, the helpers have been adjusted to set it properly at reset, so
this is not needed anymore.
Cc: linux-renesas-soc@vger.kernel.org
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-16-maxime@cerno.tech
|
|
The omap KMS driver will call drm_plane_create_zpos_property() with an
init value of the plane index and the plane type.
Since the initial value wasn't carried over in the state, the driver had
to set it again in omap_plane_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Reviewed-by: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-15-maxime@cerno.tech
|
|
The nouveau KMS driver will call drm_plane_create_zpos_property() with
an init value depending on the plane purpose.
Since the initial value wasn't carried over in the state, the driver had
to set it again in nv50_wndw_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Cc: nouveau@lists.freedesktop.org
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-14-maxime@cerno.tech
|
|
The mdp KMS driver will call drm_plane_create_zpos_property() with an
init value depending on the plane purpose.
Since the initial value wasn't carried over in the state, the driver had
to set it again in mdp5_plane_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Cc: freedreno@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-13-maxime@cerno.tech
|
|
The drm_plane_create_zpos_property() function asks for an initial value,
and will set the associated plane state variable with that value if a
state is present.
However, that function is usually called at a time where there's no
state yet. Since the drm_plane_state reset helper doesn't take care of
reading that value when it's called, it means that in most cases the
initial value will be 0, or the drivers will have to work around it.
Let's add some code in __drm_atomic_helper_plane_state_reset() to get
the initial zpos value if the property has been attached in order to fix
this.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-8-maxime@cerno.tech
|
|
Some functions to create properties (drm_plane_create_zpos_property or
drm_plane_create_color_properties for example) will ask for a range of
acceptable value and an initial one.
This initial value is then stored in the values array for that property.
Let's provide an helper to access this property.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-7-maxime@cerno.tech
|
|
While the omap_plane_init() function calls
drm_plane_create_zpos_property() with an initial value of 0,
omap_plane_reset() will force it to another value depending on the plane
type.
Fix the discrepancy by setting the initial zpos value to the same value
in the drm_plane_create_zpos_property() call.
Reviewed-by: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-5-maxime@cerno.tech
|
|
Devices can also be child nodes when we also control that device
through the upstream device (ie, MIPI-DCS for a MIPI-DSI device).
drm_of_find_panel_or_bridge can lookup panel or bridge for a given
device has port and endpoint and it fails to lookup if the device
has a child nodes.
This patch add support to lookup for a child node of the given parent
that isn't either port or ports.
Example OF graph representation of DSI host, which has port but
not has ports and has child panel node.
dsi {
compatible = "allwinner,sun6i-a31-mipi-dsi";
#address-cells = <1>;
#size-cells = <0>;
port {
dsi_in_tcon0: endpoint {
remote-endpoint = <tcon0_out_dsi>;
};
panel@0 {
reg = <0>;
};
};
Example OF graph representation of DSI host, which has ports but
not has port and has child panel node.
dsi {
compatible = "samsung,exynos5433-mipi-dsi";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi_to_mic: endpoint {
remote-endpoint = <&mic_to_dsi>;
};
};
};
panel@0 {
reg = <0>;
};
};
Example OF graph representation of DSI host, which has neither a port
nor a ports but has child panel node.
dsi0 {
compatible = "ste,mcde-dsi";
#address-cells = <1>;
#size-cells = <0>;
panel@0 {
reg = <0>;
};
};
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202160414.16493-1-jagan@amarulasolutions.com
|
|
This patch adds the CRC hashing feature supported by some recent hardware
versions of the LTDC. This is useful for test suite such as IGT-GPU-tools
[1] where a CRTC output frame can be compared to a test reference frame
thanks to their respective CRC hash.
[1] https://cgit.freedesktop.org/drm/igt-gpu-tools
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211104620.421177-1-raphael.gallais-pou@foss.st.com
|
|
Clang warns:
drivers/gpu/drm/stm/ltdc.c:625:2: warning: variable 'val' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/gpu/drm/stm/ltdc.c:635:2: note: uninitialized use occurs here
val |= LxPCR_YCEN;
^~~
drivers/gpu/drm/stm/ltdc.c:600:9: note: initialize the variable 'val' to silence this warning
u32 val;
^
= 0
1 warning generated.
Use a return instead of break in the default case to fix the warning.
Add an error message so that this return is not silent, which could hide
issues in the future.
Fixes: 484e72d3146b ("drm/stm: ltdc: add support of ycbcr pixel formats")
Link: https://github.com/ClangBuiltLinux/linux/issues/1575
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222152045.484610-1-nathan@kernel.org
|
|
The link_status array was not large enough to read the Adjust Request
Post Cursor2 register, so remove the common helper function to avoid
an OOB read, found with a -Warray-bounds build:
drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor':
drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds]
59 | return link_status[r - DP_LANE0_1_STATUS];
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status'
147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE],
| ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace the only user of the helper with an open-coded fetch and decode,
similar to drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Fixes: 79465e0ffeb9 ("drm/dp: Add helper to get post-cursor adjustments")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20220105173507.2420910-1-keescook@chromium.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The pcon_dsc_dpcd array holds 13 registers (0x92 through 0x9E). Fix the
math to calculate the max size. Found from a -Warray-bounds build:
drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_pcon_dsc_bpp_incr':
drivers/gpu/drm/drm_dp_helper.c:3130:28: error: array subscript 12 is outside array bounds of 'const u8[12]' {aka 'const unsigned char[12]'} [-Werror=array-bounds]
3130 | buf = pcon_dsc_dpcd[DP_PCON_DSC_BPP_INCR - DP_PCON_DSC_ENCODER];
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/drm_dp_helper.c:3126:39: note: while referencing 'pcon_dsc_dpcd'
3126 | int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE])
| ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Fixes: e2e16da398d9 ("drm/dp_helper: Add support for Configuring DSC for HDMI2.1 Pcon")
Cc: stable@vger.kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/lkml/20211214001849.GA62559@embeddedor/
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220105173310.2420598-1-keescook@chromium.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225035610.2552144-2-keescook@chromium.org
|
|
The nouveau driver depends on include/linux/list.h instead of
nvif/list.h, so remove the obstacle-nvif/list.h.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209065322.43938-1-cai.huoqing@linux.dev
|
|
There is now a drm_fb_xrgb8888_to_mono_reversed() helper function to do
format conversion from XRGB8888 to reversed monochrome.
Use that helper and remove the open coded version in the repaper driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193735.213185-1-javierm@redhat.com
|
|
panels
Some devices use e.g. a portrait panel in a standard laptop casing made
for landscape panels. efifb calls drm_get_panel_orientation_quirk() and
sets fb_info.fbcon_rotate_hint to make fbcon rotate the console so that
it shows up-right instead of on its side.
When switching to simpledrm the fbcon renders on its side. Call the
drm_connector_set_panel_orientation_with_quirk() helper to add
a "panel orientation" property on devices listed in the quirk table,
to make the fbcon (and aware userspace apps) rotate the image to
display properly.
Cc: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221220045.11958-1-hdegoede@redhat.com
|
|
create a pot-sized mm, then allocate one of each possible
order within. This should leave the mm with exactly one
page left. Free the largest block, then whittle down again.
Eventually we will have a fully 50% fragmented mm.
v2(Matthew Auld):
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-7-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
- add a test to ascertain that the critical functionalities
of the program is working fine
- add a timeout helper function
v2:
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-6-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
create a pot-sized mm, then allocate one of each possible
order within. This should leave the mm with exactly one
page left.
v2:
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-5-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
create a mm with one block of each order available, and
try to allocate them all.
v2(Matthew Auld):
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-4-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
- add a test to check the range allocation
- export get_buddy() function in drm_buddy.c
- export drm_prandom_u32_max_state() in lib/drm_random.c
- include helper functions
- include prime number header file
v2:
- add drm_get_buddy() function description (Matthew Auld)
- removed unnecessary test succeeded print
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-3-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
add a test to check the maximum allocation limit
v2(Matthew Auld):
- added err = -EINVAL in block NULL check
- removed unnecessary test succeeded print
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
- move i915 buddy selftests into drm selftests folder
- add Makefile and Kconfig support
- add sanitycheck testcase
Prerequisites
- These series of selftests patches are created on top of
drm buddy series
- Enable kselftests for DRM as a module in .config
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Add device pointer so scheduler's printing can use
DRM_DEV_ERROR() instead, which makes life easier under multiple GPU
scenario.
v2: amend all calls of drm_sched_init()
v3: fill dev pointer for all drm_sched_init() calls
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095705.5290-1-Jiawei.Gu@amd.com
|
|
On contiguous allocation, we round up the size
to the *next* power of 2, implement a function
to free the unused pages after the newly allocate block.
v2(Matthew Auld):
- replace function name 'drm_buddy_free_unused_pages' with
drm_buddy_block_trim
- replace input argument name 'actual_size' with 'new_size'
- add more validation checks for input arguments
- add overlaps check to avoid needless searching and splitting
- merged the below patch to see the feature in action
- add free unused pages support to i915 driver
- lock drm_buddy_block_trim() function as it calls mark_free/mark_split
are all globally visible
v3(Matthew Auld):
- remove trim method error handling as we address the failure case
at drm_buddy_block_trim() function
v4:
- in case of trim, at __alloc_range() split_block failure path
marks the block as free and removes it from the original list,
potentially also freeing it, to overcome this problem, we turn
the drm_buddy_block_trim() input node into a temporary node to
prevent recursively freeing itself, but still retain the
un-splitting/freeing of the other nodes(Matthew Auld)
- modify the drm_buddy_block_trim() function return type
v5(Matthew Auld):
- revert drm_buddy_block_trim() function return type changes in v4
- modify drm_buddy_block_trim() passing argument n_pages to original_size
as n_pages has already been rounded up to the next power-of-two and
passing n_pages results noop
v6:
- fix warnings reported by kernel test robot <lkp@intel.com>
v7:
- modify drm_buddy_block_trim() function doc description
- at drm_buddy_block_trim() handle non-allocated block as
a serious programmer error
- fix a typo
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221164552.2434-3-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Implemented a function which walk through the order list,
compares the offset and returns the maximum offset block,
this method is unpredictable in obtaining the high range
address blocks which depends on allocation and deallocation.
for instance, if driver requests address at a low specific
range, allocator traverses from the root block and splits
the larger blocks until it reaches the specific block and
in the process of splitting, lower orders in the freelist
are occupied with low range address blocks and for the
subsequent TOPDOWN memory request we may return the low
range blocks.To overcome this issue, we may go with the
below approach.
The other approach, sorting each order list entries in
ascending order and compares the last entry of each
order list in the freelist and return the max block.
This creates sorting overhead on every drm_buddy_free()
request and split up of larger blocks for a single page
request.
v2:
- Fix alignment issues(Matthew Auld)
- Remove unnecessary list_empty check(Matthew Auld)
- merged the below patch to see the feature in action
- add top-down alloc support to i915 driver
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221164552.2434-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
- Make drm_buddy_alloc a single function to handle
range allocation and non-range allocation demands
- Implemented a new function alloc_range() which allocates
the requested power-of-two block comply with range limitations
- Moved order computation and memory alignment logic from
i915 driver to drm buddy
v2:
merged below changes to keep the build unbroken
- drm_buddy_alloc_range() becomes obsolete and may be removed
- enable ttm range allocation (fpfn / lpfn) support in i915 driver
- apply enhanced drm_buddy_alloc() function to i915 driver
v3(Matthew Auld):
- Fix alignment issues and remove unnecessary list_empty check
- add more validation checks for input arguments
- make alloc_range() block allocations as bottom-up
- optimize order computation logic
- replace uint64_t with u64, which is preferred in the kernel
v4(Matthew Auld):
- keep drm_buddy_alloc_range() function implementation for generic
actual range allocations
- keep alloc_range() implementation for end bias allocations
v5(Matthew Auld):
- modify drm_buddy_alloc() passing argument place->lpfn to lpfn
as place->lpfn will currently always be zero for i915
v6(Matthew Auld):
- fixup potential uaf - If we are unlucky and can't allocate
enough memory when splitting blocks, where we temporarily
end up with the given block and its buddy on the respective
free list, then we need to ensure we delete both blocks,
and no just the buddy, before potentially freeing them
- fix warnings reported by kernel test robot <lkp@intel.com>
v7(Matthew Auld):
- revert fixup potential uaf
- keep __alloc_range() add node to the list logic same as
drm_buddy_alloc_blocks() by having a temporary list variable
- at drm_buddy_alloc_blocks() keep i915 range_overflows macro
and add a new check for end variable
v8:
- fix warnings reported by kernel test robot <lkp@intel.com>
v9(Matthew Auld):
- remove DRM_BUDDY_RANGE_ALLOCATION flag
- remove unnecessary function description
v10:
- keep DRM_BUDDY_RANGE_ALLOCATION flag as removing the flag
and replacing with (end < size) logic fails amdgpu driver load
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221164552.2434-1-Arunpravin.PaneerSelvam@amd.com
|
|
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-18-ville.syrjala@linux.intel.com
|
|
Add some code and config to also support the ACX424AKM used in
some Sony (Ericsson) Mobile phones.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-3-linus.walleij@linaro.org
|
|
These IDs were found in the wild in a Sony Xperia vendor tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-2-linus.walleij@linaro.org
|
|
A code drop from Sony Mobile reveals that the ACX424 panels are
built around the Novatek NT35560 panel controllers so just bite
the bullet and rename the driver and all basic symbols so that
we can modify this driver to cover any other panels also using
the Novatek NT35560 display controller.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-1-linus.walleij@linaro.org
|
|
Add support for the 14" sharp,lq140m1jw46 eDP panel.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1644494255-6632-5-git-send-email-quic_sbillaka@quicinc.com
|
|
Add support for sharp LQ140M1JW46 display panel. It is a 14" eDP panel
with 1920x1080 display resolution.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1644494255-6632-2-git-send-email-quic_sbillaka@quicinc.com
|
|
Fbdev's deferred I/O sorts all dirty pages by default, which incurs a
significant overhead. Make the sorting step optional and update the few
drivers that require it. Use a FIFO list by default.
Most fbdev drivers with deferred I/O build a bounding rectangle around
the dirty pages or simply flush the whole screen. The only two affected
DRM drivers, generic fbdev and vmwgfx, both use a bounding rectangle.
In those cases, the exact order of the pages doesn't matter. The other
drivers look at the page index or handle pages one-by-one. The patch
sets the sort_pagelist flag for those, even though some of them would
probably work correctly without sorting. Driver maintainers should update
their driver accordingly.
Sorting pages by memory offset for deferred I/O performs an implicit
bubble-sort step on the list of dirty pages. The algorithm goes through
the list of dirty pages and inserts each new page according to its
index field. Even worse, list traversal always starts at the first
entry. As video memory is most likely updated scanline by scanline, the
algorithm traverses through the complete list for each updated page.
For example, with 1024x768x32bpp each page covers exactly one scanline.
Writing a single screen update from top to bottom requires updating
768 pages. With an average list length of 384 entries, a screen update
creates (768 * 384 =) 294912 compare operation.
Fix this by making the sorting step opt-in and update the few drivers
that require it. All other drivers work with unsorted page lists. Pages
are appended to the list. Therefore, in the common case of writing the
framebuffer top to bottom, pages are still sorted by offset, which may
have a positive effect on performance.
Playing a video [1] in mplayer's benchmark mode shows the difference
(i7-4790, FullHD, simpledrm, kernel with debugging).
mplayer -benchmark -nosound -vo fbdev ./big_buck_bunny_720p_stereo.ogg
With sorted page lists:
BENCHMARKs: VC: 32.960s VO: 73.068s A: 0.000s Sys: 2.413s = 108.441s
BENCHMARK%: VC: 30.3947% VO: 67.3802% A: 0.0000% Sys: 2.2251% = 100.0000%
With unsorted page lists:
BENCHMARKs: VC: 31.005s VO: 42.889s A: 0.000s Sys: 2.256s = 76.150s
BENCHMARK%: VC: 40.7156% VO: 56.3219% A: 0.0000% Sys: 2.9625% = 100.0000%
VC shows the overhead of video decoding, VO shows the overhead of the
video output. Using unsorted page lists reduces the benchmark's run time
by ~32s/~25%.
v2:
* Make sorted pagelists the special case (Sam)
* Comment on drivers' use of pagelist (Sam)
* Warn about the overhead in comment
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://download.blender.org/peach/bigbuckbunny_movies/big_buck_bunny_720p_stereo.ogg # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20220211094640.21632-3-tzimmermann@suse.de
|
|
Return early if a page is already in the list of dirty pages for
deferred I/O. This can be detected if the page's list head is not
empty. Keep the list head initialized while the page is not enlisted
to make this work reliably.
v2:
* update comment and fix spelling (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211094640.21632-2-tzimmermann@suse.de
|
|
The ssd130x DRM driver also makes use of this Device Tree binding to allow
existing users of the fbdev driver to migrate without the need to change
their Device Trees.
Add myself as another maintainer of the binding, to make sure that I will
be on Cc when patches are proposed for it.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214133935.3278933-1-javierm@redhat.com
|
|
To make sure that tools like the get_maintainer.pl script will suggest
to Cc me if patches are posted for this driver.
Also include the Device Tree binding for the old ssd1307fb fbdev driver
since the new DRM driver was made compatible with the existing binding.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214133915.3278886-1-javierm@redhat.com
|
|
The ssd130x driver only provides the core support for these devices but it
does not have any bus transport logic. Add a driver to interface over I2C.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-5-javierm@redhat.com
|
|
This adds a DRM driver for SSD1305, SSD1306, SSD1307 and SSD1309 Solomon
OLED display controllers.
It's only the core part of the driver and a bus specific driver is needed
for each transport interface supported by the display controllers.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-4-javierm@redhat.com
|
|
Add support to convert from XR24 to reversed monochrome for drivers that
control monochromatic display panels, that only have 1 bit per pixel.
The function does a line-by-line conversion doing an intermediate step
first from XR24 to 8-bit grayscale and then to reversed monochrome.
The drm_fb_gray8_to_mono_reversed_line() helper was based on code from
drivers/gpu/drm/tiny/repaper.c driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-3-javierm@redhat.com
|
|
Pull the per-line conversion logic into a separate helper function.
This will allow to do line-by-line conversion in other helpers that
convert to a gray8 format.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-2-javierm@redhat.com
|
|
There is no object id in drm_display_mode anymore.
Remove stale comments to the contrary.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209091928.14766-2-ville.syrjala@linux.intel.com
Acked-by: Maxime Ripard <maxime@cerno.tech>
|
|
Use of_device_get_match_data() to simplify the code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214020530.1714631-1-chi.minghao@zte.com.cn
|
|
Recently we added generic "edp-panel"s probed by EDID. To support
panels in this way we look at the panel ID in the EDID and look up the
panel in a table that has power sequence timings. If we find a panel
that's not in the table we will still attempt to use it but we'll use
conservative timings. While it's likely that these conservative
timings will work for most nearly all panels, the performance of
turning the panel off and on suffers.
We'd like to be able to reliably detect the case that we're using the
hardcoded timings without relying on parsing dmesg. This allows us to
implement tests that ensure that no devices get shipped that are
relying on the conservative timings.
Let's add a new debugfs entry to panel devices. It will have one of:
* UNKNOWN - We tried to detect a panel but it wasn't in our table.
* HARDCODED - We're not using generic "edp-panel" probed by EDID.
* A panel name - This is the name of the panel from our table.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.3.I209d72bcc571e1d7d6b793db71bf15c9c0fc9292@changeid
|
|
We'd like panels to be able to add things to debugfs underneath the
connector's directory. Let's plumb it through. A panel will be able to
put things in a "panel" directory under the connector's
directory. Note that debugfs is not ABI and so it's always possible
that the location that the panel gets for its debugfs could change in
the future.
NOTE: this currently only works if you're using a modern
architecture. Specifically the plumbing relies on _both_
drm_bridge_connector and drm_panel_bridge. If you're not using one or
both of these things then things won't be plumbed through.
As a side effect of this change, drm_bridges can also get callbacks to
put stuff underneath the connector's debugfs directory. At the moment
all bridges in the chain have their debugfs_init() called with the
connector's root directory.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.2.Ib0bd5346135cbb0b63006b69b61d4c8af6484740@changeid
|
|
The ti-sn65dsi86 driver shouldn't hand-roll its own bridge
connector. It should use the normal drm_bridge_connector. Let's switch
to do that, removing all of the custom code.
NOTE: this still _doesn't_ implement DRM_BRIDGE_ATTACH_NO_CONNECTOR
support for ti-sn65dsi86 and that would still be a useful thing to do
in the future. It was attempted in the past [1] but put on the back
burner. However, unless we instantly change ti-sn65dsi86 fully from
not supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR at all to _only_
supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR then we'll still need a bit
of time when we support both. This is a better way to support the old
way where the driver hand rolls things itself.
A new notes about the implementation here:
* When using the drm_bridge_connector the connector should be created
after all the bridges, so we change the ordering a bit.
* I'm reasonably certain that we don't need to do anything to "free"
the new drm_bridge_connector. If drm_bridge_connector_init() returns
success then we know drm_connector_init() was called with the
`drm_bridge_connector_funcs`. The `drm_bridge_connector_funcs` has a
.destroy() that does all the cleanup. drm_connector_init() calls
__drm_mode_object_add() with a drm_connector_free() that will call
the .destroy().
* I'm also reasonably certain that I don't need to "undo" the
drm_bridge_attach() if drm_bridge_connector_init() fails. The
"detach" function is private and other similar code doesn't try to
undo the drm_bridge_attach() in error cases. There's also a comment
indicating the lack of balance at the top of drm_bridge_attach().
[1] https://lore.kernel.org/r/20210920225801.227211-4-robdclark@gmail.com
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.1.I3ab26b7f197cc56c874246a43e57913e9c2c1028@changeid
|
|
Use the one provided by TTM instead.
v2: drop new_mem parameter as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-5-christian.koenig@amd.com
|
|
The length of EDID block can be longer than 256 bytes, so we should use
`int` instead of `u8` for the `edid_pos` variable.
Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210103827.402436-1-treapking@chromium.org
|
|
This is provided by TTM now.
Also switch man->size to bytes instead of pages and fix the double
printing of size and usage in debugfs.
v2: fix size checking as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-8-christian.koenig@amd.com
|
|
This is provided by TTM now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-7-christian.koenig@amd.com
|
|
This is provided by TTM now.
Also switch man->size to bytes instead of pages and fix the double
printing of size and usage in debugfs.
v2: fix size checking as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-6-christian.koenig@amd.com
|
