summaryrefslogtreecommitdiffstats
path: root/kernel/signal.c (unfollow)
Commit message (Collapse)AuthorFilesLines
2015-07-05bluetooth: fix list handlingLinus Torvalds2-2/+3
Commit 835a6a2f8603 ("Bluetooth: Stop sabotaging list poisoning") thought that the code was sabotaging the list poisoning when NULL'ing out the list pointers and removed it. But what was going on was that the bluetooth code was using NULL pointers for the list as a way to mark it empty, and that commit just broke it (and replaced the test with NULL with a "list_empty()" test on a uninitialized list instead, breaking things even further). So fix it all up to use the regular and real list_empty() handling (which does not use NULL, but a pointer to itself), also making sure to initialize the list properly (the previous NULL case was initialized implicitly by the session being allocated with kzalloc()) This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong An. [ I would normally expect to get this through the bt tree, but I'm going to release -rc1, so I'm just committing this directly - Linus ] Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Original-by: Tedd Ho-Jeong An <tedd.an@intel.com> Original-by: Marcel Holtmann <marcel@holtmann.org>: Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-049p: cope with bogus responses from server in p9_client_{read,write}Al Viro1-0/+8
if server claims to have written/read more than we'd told it to, warn and cap the claimed byte count to avoid advancing more than we are ready to.
2015-07-04p9_client_write(): avoid double p9_free_req()Al Viro1-0/+1
Braino in "9p: switch p9_client_write() to passing it struct iov_iter *"; if response is impossible to parse and we discard the request, get the out of the loop right there. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-049p: forgetting to cancel request on interrupted zero-copy RPCAl Viro1-1/+2
If we'd already sent a request and decide to abort it, we *must* issue TFLUSH properly and not just blindly reuse the tag, or we'll get seriously screwed when response eventually arrives and we confuse it for response to later request that had reused the same tag. Cc: stable@vger.kernel.org # v3.2 and later Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04dax: bdev_direct_access() may sleepMatthew Wilcox1-0/+6
The brd driver is the only in-tree driver that may sleep currently. After some discussion on linux-fsdevel, we decided that any driver may choose to sleep in its ->direct_access method. To ensure that all callers of bdev_direct_access() are prepared for this, add a call to might_sleep(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04block: Add support for DAX reads/writes to block devicesMatthew Wilcox2-2/+8
If a block device supports the ->direct_access methods, bypass the normal DIO path and use DAX to go straight to memcpy() instead of allocating a DIO and a BIO. Includes support for the DIO_SKIP_DIO_COUNT flag in DAX, as is done in do_blockdev_direct_IO(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04dax: Use copy_from_iter_nocacheMatthew Wilcox1-1/+1
When userspace does a write, there's no need for the written data to pollute the CPU cache. This matches the original XIP code. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04dax: Add block size note to documentationMatthew Wilcox1-2/+4
For block devices which are small enough, mkfs will default to creating a filesystem with block sizes smaller than page size. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04NTB: Add split BAR output for debugfs statsDave Jiang1-15/+68
When split BAR is enabled, the driver needs to dump out the split BAR registers rather than the original 64bit BAR registers. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Change WARN_ON_ONCE to pr_warn_once on unsafeDave Jiang1-8/+16
The unsafe doorbell and scratchpad access should display reason when WARN is called. Otherwise we get a stack dump without any explanation. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Print driver name and version in module initDave Jiang2-0/+6
Printouts driver name and version to indicate what is being loaded. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Increase transport MTU to 64k from 16kDave Jiang1-1/+1
Benchmarking showed a significant performance increase with the MTU size to 64k instead of 16k. Change the driver default to 64k. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Rename Intel code names to platform namesDave Jiang3-465/+465
Instead of using the platform code names, use the correct platform names to identify the respective Intel NTB hardware. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Default to CPU memcpy for performanceDave Jiang1-4/+13
Disable DMA usage by default, since the CPU provides much better performance with write combining. Provide a module parameter to enable DMA usage when offloading the memcpy is preferred. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Improve performance with write combiningDave Jiang1-1/+10
Changing the memory window BAR mappings to write combining significantly boosts the performance. We will also use memcpy that uses non-temporal store, which showed performance improvement when doing non-cached memcpys. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Use NUMA memory in Intel driverAllen Hubbe1-6/+12
Allocate memory for the NUMA node of the NTB device. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Use NUMA memory and DMA chan in transportAllen Hubbe1-14/+32
Allocate memory and request the DMA channel for the same NUMA node as the NTB device. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Rate limit ntb_qp_link_workAllen Hubbe1-1/+1
When the ntb transport is connecting and waiting for the peer, the debug console receives lots of debug level messages about the remote qp link status being down. Rate limit those messages. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add tool test clientAllen Hubbe4-0/+600
This is a simple debugging driver that enables the doorbell and scratch pad registers to be read and written from the debugfs. This tool enables more complicated debugging to be scripted from user space. This driver may be used to test that your ntb hardware and drivers are functioning at a basic level. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add ping pong test clientAllen Hubbe6-1/+289
This is a simple ping pong driver that exercises the scratch pads and doorbells of the ntb hardware. This driver may be used to test that your ntb hardware and drivers are functioning at a basic level. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add parameters for Intel SNB B2B addressesAllen Hubbe2-19/+68
Add module parameters for the addresses to be used in B2B topology. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Reset transport QP link stats on downAllen Hubbe1-8/+28
Reset the link stats when the link goes down. In particular, the TX and RX index and count must be reset, or else the TX side will be sending packets to the RX side where the RX side is not expecting them. Reset all the stats, to be consistent. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Do not advance transport RX on link downAllen Hubbe1-2/+1
On link down, don't advance RX index to the next entry. The next entry should never be valid after receiving the link down flag. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Differentiate transport link down messagesAllen Hubbe1-2/+2
The same message "qp %d: Link Down\n" was printed at two locations in ntb_transport. Change the messages so they are distinct. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Check the device ID to set errata flagsDave Jiang1-5/+44
Set errata flags for the specific device IDs to which they apply, instead of the whole Xeon hardware class. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Enable link for Intel root port mode in probeDave Jiang1-0/+10
Link training should be enabled in the driver probe for root port mode. We should not have to wait for transport to be loaded for this to happen. Otherwise the ntb device will not show up on the transparent bridge side of the link. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Read peer info from local SPAD in transportDave Jiang1-5/+5
The transport was writing and then reading the peer scratch pad, essentially reading what it just wrote instead of exchanging any information with the peer. The transport expects the peer values to be the same as the local values, so this issue was not obvious. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Split ntb_hw_intel and ntb_transport driversAllen Hubbe13-2194/+2588
Change ntb_hw_intel to use the new NTB hardware abstraction layer. Split ntb_transport into its own driver. Change it to use the new NTB hardware abstraction layer. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add NTB hardware abstraction layerAllen Hubbe5-1/+1271
Abstract the NTB device behind a programming interface, so that it can support different hardware and client drivers. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04x86/fpu: Fix boot crash in the early FPU codeIngo Molnar1-3/+4
Jan Kara and Thomas Gleixner reported boot crashes in the FPU code: general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffff81048a6c>] [<ffffffff81048a6c>] mxcsr_feature_mask_init+0x1c/0x40 2b:* 0f ae 85 00 fe ff ff fxsave -0x200(%rbp) and bisected it down to the following FPU commit: 91a8c2a5b43f ("x86/fpu: Clean up and fix MXCSR handling") The reason is that the on-stack FPU registers state variable, used by the FXSAVE instruction, did not have the required minimum alignment of 16 bytes, causing the general protection fault. This is most likely a GCC bug in older GCC versions, but the offending commit also added a bogus extra 32-byte alignment (which GCC ignored too). So fix this bug by making the variable static again, but also mark it __initdata this time, because fpu__init_system_mxcsr() is now an __init function. Reported-and-bisected-by: Jan Kara <jack@suse.cz> Reported-bisected-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Kara <jack@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150704075819.GA9201@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-04sched/numa: Fix numa balancing stats in /proc/pid/schedSrikar Dronamraju3-23/+47
Commit 44dba3d5d6a1 ("sched: Refactor task_struct to use numa_faults instead of numa_* pointers") modified the way tsk->numa_faults stats are accounted. However that commit never touched show_numa_stats() that is displayed in /proc/pid/sched and thus the numbers displayed in /proc/pid/sched don't match the actual numbers. Fix it by making sure that /proc/pid/sched reflects the task fault numbers. Also add group fault stats too. Also couple of more modifications are added here: 1. Format changes: - Previously we would list two entries per node, one for private and one for shared. Also the home node info was listed in each entry. - Now preferred node, total_faults and current node are displayed separately. - Now there is one entry per node, that lists private,shared task and group faults. 2. Unit changes: - p->numa_pages_migrated was getting reset after every read of /proc/pid/sched. It's more useful to have absolute numbers since differential migrations between two accesses can be more easily calculated. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Iulia Manda <iulia.manda21@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435252903-1081-4-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-04sched/numa: Show numa_group ID in /proc/sched_debug task listingsSrikar Dronamraju1-1/+1
Having the numa group ID in /proc/sched_debug helps to see how the numa groups have spread across the system. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Iulia Manda <iulia.manda21@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435252903-1081-3-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-04sched/debug: Move print_cfs_rq() declaration to kernel/sched/sched.hSrikar Dronamraju2-2/+5
Currently print_cfs_rq() is declared in include/linux/sched.h. However it's not used outside kernel/sched. Hence move the declaration to kernel/sched/sched.h Also some functions are only available for CONFIG_SCHED_DEBUG=y. Hence move the declarations to within the #ifdef. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Iulia Manda <iulia.manda21@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435252903-1081-2-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-04sched/stat: Expose /proc/pid/schedstat if CONFIG_SCHED_INFO=yNaveen N. Rao1-4/+7
Expand /proc/pid/schedstat output: - enable it on CONFIG_TASK_DELAY_ACCT=y && !CONFIG_SCHEDSTATS kernels. - dump all zeroes on kernels that are booted with the 'nodelayacct' option, which boot option disables delay accounting on CONFIG_TASK_DELAY_ACCT=y kernels. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Cc: ricklind@us.ibm.com Link: http://lkml.kernel.org/r/5ccbef17d4bc841084ea6e6421d4e4a23b7b806f.1435654789.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-04sched/stat: Simplify the sched_info accounting dependencyNaveen N. Rao5-6/+12
Both CONFIG_SCHEDSTATS=y and CONFIG_TASK_DELAY_ACCT=y track task sched_info, which results in ugly #if clauses. Simplify the code by introducing a synthethic CONFIG_SCHED_INFO switch, selected by both. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Cc: ricklind@us.ibm.com Link: http://lkml.kernel.org/r/8d19eef800811a94b0f91bcbeb27430a884d7433.1435255405.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-04drm/crtc: Fix edid length computationShixin Zeng1-1/+1
The length of each EDID block is EDID_LENGTH, and number of blocks is (1 + edid->extensions) - we need to multiply not add them. This causes wrong EDID to be passed on, and is a regression introduced by d2ed34362a52 (drm: Introduce helper for replacing blob properties) Signed-off-by: Shixin Zeng <zeng.shixin@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Stone <daniels@collabora.com> [danvet: Add Cc: and fix commit summary.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-03crypto: marvell/cesa - another fix up for of_get_named_gen_pool() renameStephen Rothwell1-2/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-03kvm: add hyper-v crash msrs valuesAndrey Smetanin1-0/+11
Added Hyper-V crash msrs values - HV_X64_MSR_CRASH*. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Peter Hornyack <peterhornyack@google.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-03KVM: x86: remove data variable from kvm_get_msr_commonNicolas Iooss1-3/+1
Commit 609e36d372ad ("KVM: x86: pass host_initiated to functions that read MSRs") modified kvm_get_msr_common function to use msr_info->data instead of data but missed one occurrence. Replace it and remove the unused local variable. Fixes: 609e36d372ad ("KVM: x86: pass host_initiated to functions that read MSRs") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-03KVM: s390: virtio-ccw: don't overwrite config space valuesCornelia Huck1-2/+9
Eric noticed problems with vhost-scsi and virtio-ccw: vhost-scsi complained about overwriting values in the config space, which was triggered by a broken implementation of virtio-ccw's config get/set routines. It was probably sheer luck that we did not hit this before. When writing a value to the config space, the WRITE_CONF ccw will always write from the beginning of the config space up to and including the value to be set. If the config space up to the value has not yet been retrieved from the device, however, we'll end up overwriting values. Keep track of the known config space and update if needed to avoid this. Moreover, READ_CONF will only read the number of bytes it has been instructed to retrieve, so we must not copy more than that to the buffer, or we might overwrite trailing values. Reported-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com> Tested-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-03KVM: x86: keep track of LVT0 changes under APICvRadim Krčmář2-6/+9
Memory-mapped LVT0 register already contains the new value when APICv traps so we can't directly detect a change. Memorize a bit we are interested in to enable legacy NMI watchdog. Suggested-by: Yoshida Nobuo <yoshida.nb@ncos.nec.co.jp> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-03KVM: x86: properly restore LVT0Radim Krčmář1-0/+1
Legacy NMI watchdog didn't work after migration/resume, because vapics_in_nmi_mode was left at 0. Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-03KVM: x86: make vapics_in_nmi_mode atomicRadim Krčmář3-4/+4
Writes were a bit racy, but hard to turn into a bug at the same time. (Particularly because modern Linux doesn't use this feature anymore.) Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> [Actually the next patch makes it much, much easier to trigger the race so I'm including this one for stable@ as well. - Paolo] Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-03sched, preempt_notifier: separate notifier registration from static_key inc/decPeter Zijlstra3-2/+20
Commit 1cde2930e154 ("sched/preempt: Add static_key() to preempt_notifiers") had two problems. First, the preempt-notifier API needs to sleep with the addition of the static_key, we do however need to hold off preemption while modifying the preempt notifier list, otherwise a preemption could observe an inconsistent list state. KVM correctly registers and unregisters preempt notifiers with preemption disabled, so the sleep caused dmesg splats. Second, KVM registers and unregisters preemption notifiers very often (in vcpu_load/vcpu_put). With a single uniprocessor guest the static key would move between 0 and 1 continuously, hitting the slow path on every userspace exit. To fix this, wrap the static_key inc/dec in a new API, and call it from KVM. Fixes: 1cde2930e154 ("sched/preempt: Add static_key() to preempt_notifiers") Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Reported-by: Takashi Iwai <tiwai@suse.de> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-03arm64: Fix show_unhandled_signal_ratelimited usageSuzuki K. Poulose2-2/+2
Commit 86dca36e6ba introduced ratelimited usage for 'unhandled_signal' messages. The commit checks the ratelimit irrespective of whether the signal is handled or not, which is wrong and leads to false reports like the below in dmesg : __do_user_fault: 127 callbacks suppressed Do the ratelimit check only if the signal is unhandled. Fixes: 86dca36e6ba0 ("arm64: use private ratelimit state along with show_unhandled_signals") Cc: Vladimir Murzin <Vladimir.Murzin@arm.com> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-07-03hwmon: (w83627ehf) Use swap() in w82627ehf_swap_tempreg()Fabian Frederick1-21/+5
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2015-07-03hwmon: Document which I2C addresses can be probedJean Delvare1-0/+7
Add an item to the checklist when submitting a new hwmon driver: only some I2C addresses can be probed, others should not for safety reasons. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-07-03hwmon: (w83792d) Additional PWM outputs supportRoger Lucas2-10/+35
Add pwm[4-7] and the associated pwm[4-7]_mode attributes. Signed-off-by: Roger Lucas <vt8231@hiddenengine.co.uk> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2015-07-03ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entryHanjun Guo1-4/+4
It is normal that firmware presents GICC entry or entries (processors) with disabled flag in ACPI MADT, taking a system of 16 cpus for example, ACPI firmware may present 8 ebabled first with another 8 cpus disabled in MADT, the disabled cpus can be hot-added later. Firmware may also present more cpus than the hardware actually has, but disabled the unused ones, and easily enable it when the hardware has such cpus to make the firmware code scalable. So that's not an error for disabled cpus in MADT, we can switch pr_err() to pr_debug() to make the boot a little quieter by default. Since hwid for disabled cpus often are invalid, and we check invalid hwid first in the code, for use case that hot add cpus later will be filtered out and will not be counted in possible cups, so move this check before the hwid one to prepare the code to count for disabeld cpus when cpu hot-plug is introduced. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Al Stone <ahs3@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-07-03make certificate list change message more usefulLinus Torvalds1-1/+1
It's a bug in our Makefile rules, make it show what the changing certificate list was, and make it a warning so that people actually see it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>