summaryrefslogtreecommitdiffstats
path: root/mm/mm_init.c (unfollow)
Commit message (Collapse)AuthorFilesLines
2017-10-14x86/microcode: Do the family check firstBorislav Petkov1-9/+18
On CPUs like AMD's Geode, for example, we shouldn't even try to load microcode because they do not support the modern microcode loading interface. However, we do the family check *after* the other checks whether the loader has been disabled on the command line or whether we're running in a guest. So move the family checks first in order to exit early if we're being loaded on an unsupported family. Reported-and-tested-by: Sven Glodowski <glodi1@arcor.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.11.. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://bugzilla.suse.com/show_bug.cgi?id=1061396 Link: http://lkml.kernel.org/r/20171012112316.977-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-14locking/lockdep: Disable cross-release features for nowIngo Molnar1-2/+2
Johan Hovold reported a big lockdep slowdown on his system, caused by lockdep: > I had noticed that the BeagleBone Black boot time appeared to have > increased significantly with 4.14 and yesterday I finally had time to > investigate it. > > Boot time (from "Linux version" to login prompt) had in fact doubled > since 4.13 where it took 17 seconds (with my current config) compared to > the 35 seconds I now see with 4.14-rc4. > > I quick bisect pointed to lockdep and specifically the following commit: > > 28a903f63ec0 ("locking/lockdep: Handle non(or multi)-acquisition of a crosslock") Because the final v4.14 release is close, disable the cross-release lockdep features for now. Bisected-by: Johan Hovold <johan@kernel.org> Debugged-by: Johan Hovold <johan@kernel.org> Reported-by: Johan Hovold <johan@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Lindgren <tony@atomide.com> Cc: kernel-team@lge.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Cc: linux-omap@vger.kernel.org Link: http://lkml.kernel.org/r/20171014072659.f2yr6mhm5ha3eou7@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-14x86/mm: Flush more aggressively in lazy TLB modeAndy Lutomirski3-49/+136
Since commit: 94b1b03b519b ("x86/mm: Rework lazy TLB mode and TLB freshness tracking") x86's lazy TLB mode has been all the way lazy: when running a kernel thread (including the idle thread), the kernel keeps using the last user mm's page tables without attempting to maintain user TLB coherence at all. From a pure semantic perspective, this is fine -- kernel threads won't attempt to access user pages, so having stale TLB entries doesn't matter. Unfortunately, I forgot about a subtlety. By skipping TLB flushes, we also allow any paging-structure caches that may exist on the CPU to become incoherent. This means that we can have a paging-structure cache entry that references a freed page table, and the CPU is within its rights to do a speculative page walk starting at the freed page table. I can imagine this causing two different problems: - A speculative page walk starting from a bogus page table could read IO addresses. I haven't seen any reports of this causing problems. - A speculative page walk that involves a bogus page table can install garbage in the TLB. Such garbage would always be at a user VA, but some AMD CPUs have logic that triggers a machine check when it notices these bogus entries. I've seen a couple reports of this. Boris further explains the failure mode: > It is actually more of an optimization which assumes that paging-structure > entries are in WB DRAM: > > "TlbCacheDis: cacheable memory disable. Read-write. 0=Enables > performance optimization that assumes PML4, PDP, PDE, and PTE entries > are in cacheable WB-DRAM; memory type checks may be bypassed, and > addresses outside of WB-DRAM may result in undefined behavior or NB > protocol errors. 1=Disables performance optimization and allows PML4, > PDP, PDE and PTE entries to be in any memory type. Operating systems > that maintain page tables in memory types other than WB- DRAM must set > TlbCacheDis to insure proper operation." > > The MCE generated is an NB protocol error to signal that > > "Link: A specific coherent-only packet from a CPU was issued to an > IO link. This may be caused by software which addresses page table > structures in a memory type other than cacheable WB-DRAM without > properly configuring MSRC001_0015[TlbCacheDis]. This may occur, for > example, when page table structure addresses are above top of memory. In > such cases, the NB will generate an MCE if it sees a mismatch between > the memory operation generated by the core and the link type." > > I'm assuming coherent-only packets don't go out on IO links, thus the > error. To fix this, reinstate TLB coherence in lazy mode. With this patch applied, we do it in one of two ways: - If we have PCID, we simply switch back to init_mm's page tables when we enter a kernel thread -- this seems to be quite cheap except for the cost of serializing the CPU. - If we don't have PCID, then we set a flag and switch to init_mm the first time we would otherwise need to flush the TLB. The /sys/kernel/debug/x86/tlb_use_lazy_mode debug switch can be changed to override the default mode for benchmarking. In theory, we could optimize this better by only flushing the TLB in lazy CPUs when a page table is freed. Doing that would require auditing the mm code to make sure that all page table freeing goes through tlb_remove_page() as well as reworking some data structures to implement the improved flush logic. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biggers <ebiggers@google.com> Cc: Johannes Hirte <johannes.hirte@datenkhaos.de> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 94b1b03b519b ("x86/mm: Rework lazy TLB mode and TLB freshness tracking") Link: http://lkml.kernel.org/r/20171009170231.fkpraqokz6e4zeco@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-14mm, swap: use page-cluster as max window of VMA based swap readaheadHuang Ying2-44/+7
When the VMA based swap readahead was introduced, a new knob /sys/kernel/mm/swap/vma_ra_max_order was added as the max window of VMA swap readahead. This is to make it possible to use different max window for VMA based readahead and original physical readahead. But Minchan Kim pointed out that this will cause a regression because setting page-cluster sysctl to zero cannot disable swap readahead with the change. To fix the regression, the page-cluster sysctl is used as the max window of both the VMA based swap readahead and original physical swap readahead. If more fine grained control is needed in the future, more knobs can be added as the subordinate knobs of the page-cluster sysctl. The vma_ra_max_order knob is deleted. Because the knob was introduced in v4.14-rc1, and this patch is targeting being merged before v4.14 releasing, there should be no existing users of this newly added ABI. Link: http://lkml.kernel.org/r/20171011070847.16003-1-ying.huang@intel.com Fixes: ec560175c0b6fce ("mm, swap: VMA based swap readahead") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14mm: page_vma_mapped: ensure pmd is loaded with READ_ONCE outside of lockWill Deacon1-15/+10
Loading the pmd without holding the pmd_lock exposes us to races with concurrent updaters of the page tables but, worse still, it also allows the compiler to cache the pmd value in a register and reuse it later on, even if we've performed a READ_ONCE in between and seen a more recent value. In the case of page_vma_mapped_walk, this leads to the following crash when the pmd loaded for the initial pmd_trans_huge check is all zeroes and a subsequent valid table entry is loaded by check_pmd. We then proceed into map_pte, but the compiler re-uses the zero entry inside pte_offset_map, resulting in a junk pointer being installed in pvmw->pte: PC is at check_pte+0x20/0x170 LR is at page_vma_mapped_walk+0x2e0/0x540 [...] Process doio (pid: 2463, stack limit = 0xffff00000f2e8000) Call trace: check_pte+0x20/0x170 page_vma_mapped_walk+0x2e0/0x540 page_mkclean_one+0xac/0x278 rmap_walk_file+0xf0/0x238 rmap_walk+0x64/0xa0 page_mkclean+0x90/0xa8 clear_page_dirty_for_io+0x84/0x2a8 mpage_submit_page+0x34/0x98 mpage_process_page_bufs+0x164/0x170 mpage_prepare_extent_to_map+0x134/0x2b8 ext4_writepages+0x484/0xe30 do_writepages+0x44/0xe8 __filemap_fdatawrite_range+0xbc/0x110 file_write_and_wait_range+0x48/0xd8 ext4_sync_file+0x80/0x4b8 vfs_fsync_range+0x64/0xc0 SyS_msync+0x194/0x1e8 This patch fixes the problem by ensuring that READ_ONCE is used before the initial checks on the pmd, and this value is subsequently used when checking whether or not the pmd is present. pmd_check is removed and the pmd_present check is inlined directly. Link: http://lkml.kernel.org/r/1507222630-5839-1-git-send-email-will.deacon@arm.com Fixes: f27176cfc363 ("mm: convert page_mkclean_one() to use page_vma_mapped_walk()") Signed-off-by: Will Deacon <will.deacon@arm.com> Tested-by: Yury Norov <ynorov@caviumnetworks.com> Tested-by: Richard Ruigrok <rruigrok@codeaurora.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14kmemleak: clear stale pointers from task stacksKonstantin Khlebnikov2-1/+5
Kmemleak considers any pointers on task stacks as references. This patch clears newly allocated and reused vmap stacks. Link: http://lkml.kernel.org/r/150728990124.744199.8403409836394318684.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14fs/binfmt_misc.c: node could be NULL when evicting inodeEryu Guan1-1/+1
inode->i_private is assigned by a Node pointer only after registering a new binary format, so it could be NULL if inode was created by bm_fill_super() (or iput() was called by the error path in bm_register_write()), and this could result in NULL pointer dereference when evicting such an inode. e.g. mount binfmt_misc filesystem then umount it immediately: mount -t binfmt_misc binfmt_misc /proc/sys/fs/binfmt_misc umount /proc/sys/fs/binfmt_misc will result in BUG: unable to handle kernel NULL pointer dereference at 0000000000000013 IP: bm_evict_inode+0x16/0x40 [binfmt_misc] ... Call Trace: evict+0xd3/0x1a0 iput+0x17d/0x1d0 dentry_unlink_inode+0xb9/0xf0 __dentry_kill+0xc7/0x170 shrink_dentry_list+0x122/0x280 shrink_dcache_parent+0x39/0x90 do_one_tree+0x12/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_litter_super+0x29/0x40 deactivate_locked_super+0x43/0x70 deactivate_super+0x45/0x60 cleanup_mnt+0x3f/0x70 __cleanup_mnt+0x12/0x20 task_work_run+0x86/0xa0 exit_to_usermode_loop+0x6d/0x99 syscall_return_slowpath+0xba/0xf0 entry_SYSCALL_64_fastpath+0xa3/0xa Fix it by making sure Node (e) is not NULL. Link: http://lkml.kernel.org/r/20171010100642.31786-1-eguan@redhat.com Fixes: 83f918274e4b ("exec: binfmt_misc: shift filp_close(interp_file) from kill_node() to bm_evict_inode()") Signed-off-by: Eryu Guan <eguan@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14fs/mpage.c: fix mpage_writepage() for pages with buffersMatthew Wilcox3-5/+16
When using FAT on a block device which supports rw_page, we can hit BUG_ON(!PageLocked(page)) in try_to_free_buffers(). This is because we call clean_buffers() after unlocking the page we've written. Introduce a new clean_page_buffers() which cleans all buffers associated with a page and call it from within bdev_write_page(). [akpm@linux-foundation.org: s/PAGE_SIZE/~0U/ per Linus and Matthew] Link: http://lkml.kernel.org/r/20171006211541.GA7409@bombadil.infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reported-by: Toshi Kani <toshi.kani@hpe.com> Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Tested-by: Toshi Kani <toshi.kani@hpe.com> Acked-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14linux/kernel.h: add/correct kernel-doc notationRandy Dunlap1-16/+74
Add kernel-doc notation for some macros. Correct kernel-doc comments & typos for a few macros. Link: http://lkml.kernel.org/r/76fa1403-1511-be4c-e9c4-456b43edfad3@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14tty: fall back to N_NULL if switching to N_TTY fails during hangupJohannes Weiner1-6/+5
We have seen NULL-pointer dereference crashes in tty->disc_data when the N_TTY fallback driver failed to open during hangup. The immediate cause of this open to fail has been addressed in the preceding patch to vmalloc(), but this code could be more robust. As Alan pointed out in commit 8a8dabf2dd68 ("tty: handle the case where we cannot restore a line discipline"), the N_TTY driver, historically the safe fallback that could never fail, can indeed fail, but the surrounding code is not prepared to handle this. To avoid crashes he added a new N_NULL driver to take N_TTY's place as the last resort. Hook that fallback up to the hangup path. Update tty_ldisc_reinit() to reflect the reality that n_tty_open can indeed fail. Link: http://lkml.kernel.org/r/20171004185959.GC2136@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Christoph Hellwig <hch@lst.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14Revert "vmalloc: back off when the current task is killed"Johannes Weiner1-6/+0
This reverts commits 5d17a73a2ebe ("vmalloc: back off when the current task is killed") and 171012f56127 ("mm: don't warn when vmalloc() fails due to a fatal signal"). Commit 5d17a73a2ebe ("vmalloc: back off when the current task is killed") made all vmalloc allocations from a signal-killed task fail. We have seen crashes in the tty driver from this, where a killed task exiting tries to switch back to N_TTY, fails n_tty_open because of the vmalloc failing, and later crashes when dereferencing tty->disc_data. Arguably, relying on a vmalloc() call to succeed in order to properly exit a task is not the most robust way of doing things. There will be a follow-up patch to the tty code to fall back to the N_NULL ldisc. But the justification to make that vmalloc() call fail like this isn't convincing, either. The patch mentions an OOM victim exhausting the memory reserves and thus deadlocking the machine. But the OOM killer is only one, improbable source of fatal signals. It doesn't make sense to fail allocations preemptively with plenty of memory in most cases. The patch doesn't mention real-life instances where vmalloc sites would exhaust memory, which makes it sound more like a theoretical issue to begin with. But just in case, the OOM access to memory reserves has been restricted on the allocator side in cd04ae1e2dc8 ("mm, oom: do not rely on TIF_MEMDIE for memory reserves access"), which should take care of any theoretical concerns on that front. Revert this patch, and the follow-up that suppresses the allocation warnings when we fail the allocations due to a signal. Link: http://lkml.kernel.org/r/20171004185906.GB2136@cmpxchg.org Fixes: 171012f56127 ("mm: don't warn when vmalloc() fails due to a fatal signal") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Christoph Hellwig <hch@lst.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14mm/cma.c: take __GFP_NOWARN into account in cma_alloc()Boris Brezillon1-1/+1
cma_alloc() unconditionally prints an INFO message when the CMA allocation fails. Make this message conditional on the non-presence of __GFP_NOWARN in gfp_mask. This patch aims at removing INFO messages that are displayed when the VC4 driver tries to allocate buffer objects. From the driver perspective an allocation failure is acceptable, and the driver can possibly do something to make following allocation succeed (like flushing the VC4 internal cache). Link: http://lkml.kernel.org/r/20171004125447.15195-1-boris.brezillon@free-electrons.com Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Laura Abbott <labbott@redhat.com> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14scripts/kallsyms.c: ignore symbol type 'n'Guenter Roeck1-1/+1
gcc on aarch64 may emit synbols of type 'n' if the kernel is built with '-frecord-gcc-switches'. In most cases, those symbols are reported with nm as 000000000000000e n $d and with objdump as 0000000000000000 l d .GCC.command.line 0000000000000000 .GCC.command.line 000000000000000e l .GCC.command.line 0000000000000000 $d Those symbols are detected in is_arm_mapping_symbol() and ignored. However, if "--prefix-symbols=<prefix>" is configured as well, the situation is different. For example, in efi/libstub, arm64 images are built with '--prefix-alloc-sections=.init --prefix-symbols=__efistub_'. In combination with '-frecord-gcc-switches', the symbols are now reported by nm as: 000000000000000e n __efistub_$d and by objdump as: 0000000000000000 l d .GCC.command.line 0000000000000000 .GCC.command.line 000000000000000e l .GCC.command.line 0000000000000000 __efistub_$d Those symbols are no longer ignored and included in the base address calculation. This results in a base address of 000000000000000e, which in turn causes kallsyms to abort with kallsyms failure: relative symbol value 0xffffff900800a000 out of range in relative mode The problem is seen in little endian arm64 builds with CONFIG_EFI enabled and with '-frecord-gcc-switches' set in KCFLAGS. Explicitly ignore symbols of type 'n' since those are clearly debug symbols. Link: http://lkml.kernel.org/r/1507136063-3139-1-git-send-email-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14userfaultfd: selftest: exercise -EEXIST only in background transferAndrea Arcangeli1-5/+20
I was stress testing some backports and with high load, after some time, the latest version of the selftest showed some false positive in connection with the uffdio_copy_retry. This seems to fix it while still exercising -EEXIST in the background transfer once in a while. The fork child will quit after the last UFFDIO_COPY is run, so a repeated UFFDIO_COPY may not return -EEXIST. This change restricts the -EEXIST stress to the background transfer where the memory can't go away from under it. Also updated uffdio_zeropage, so the interface is consistent. Link: http://lkml.kernel.org/r/20171004171541.1495-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14mm: only display online cpus of the numa nodeZhen Lei1-2/+10
When I execute numactl -H (which reads /sys/devices/system/node/nodeX/cpumap and displays cpumask_of_node for each node), I get different result on X86 and arm64. For each numa node, the former only displayed online CPUs, and the latter displayed all possible CPUs. Unfortunately, both Linux documentation and numactl manual have not described it clear. I sent a mail to ask for help, and Michal Hocko replied that he preferred to print online cpus because it doesn't really make much sense to bind anything on offline nodes. Will said: "I suspect the vast majority (if not all) code that reads this file was developed for x86, so having the same behaviour for arm64 sounds like something we should do ASAP before people try to special case with things like #ifdef __aarch64__. I'd rather have this in 4.14 if possible." Link: http://lkml.kernel.org/r/1506678805-15392-2-git-send-email-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tianhong Ding <dingtianhong@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Libin <huawei.libin@huawei.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14mm: remove unnecessary WARN_ONCE in page_vma_mapped_walk().Zi Yan1-2/+1
A non present pmd entry can appear after pmd_lock is taken in page_vma_mapped_walk(), even if THP migration is not enabled. The WARN_ONCE is unnecessary. Link: http://lkml.kernel.org/r/20171003142606.12324-1-zi.yan@sent.com Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path") Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14mm/mempolicy: fix NUMA_INTERLEAVE_HIT counterAndrey Ryabinin1-2/+5
Commit 3a321d2a3dde ("mm: change the call sites of numa statistics items") separated NUMA counters from zone counters, but the NUMA_INTERLEAVE_HIT call site wasn't updated to use the new interface. So alloc_page_interleave() actually increments NR_ZONE_INACTIVE_FILE instead of NUMA_INTERLEAVE_HIT. Fix this by using __inc_numa_state() interface to increment NUMA_INTERLEAVE_HIT. Link: http://lkml.kernel.org/r/20171003191003.8573-1-aryabinin@virtuozzo.com Fixes: 3a321d2a3dde ("mm: change the call sites of numa statistics items") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Kemi Wang <kemi.wang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14include/linux/of.h: provide of_n_{addr,size}_cells wrappers for !CONFIG_OFArnd Bergmann1-0/+10
The pci-rcar driver is enabled for compile tests, and this has shown that the driver cannot build without CONFIG_OF, following the inclusion of commit f8f2fe7355fb ("PCI: rcar: Use new OF interrupt mapping when possible"): drivers/pci/host/pcie-rcar.c: In function 'pci_dma_range_parser_init': drivers/pci/host/pcie-rcar.c:1039:2: error: implicit declaration of function 'of_n_addr_cells' [-Werror=implicit-function-declaration] parser->pna = of_n_addr_cells(node); ^ As pointed out by Ben Dooks and Geert Uytterhoeven, this is actually supposed to build fine, which we can achieve if we make the declaration of of_irq_parse_and_map_pci conditional on CONFIG_OF and provide an empty inline function otherwise, as we do for a lot of other of interfaces. This lets us build the rcar_pci driver again without CONFIG_OF for build testing. All platforms using this driver select OF, so this doesn't change anything for the users. [akpm@linux-foundation.org: be consistent with surrounding code] Link: http://lkml.kernel.org/r/20170911200805.3363318-1-arnd@arndb.de Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Magnus Damm <damm@opensource.se> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14mm/madvise.c: add description for MADV_WIPEONFORK and MADV_KEEPONFORKYang Shi1-1/+6
mm/madvise.c has a brief description about all MADV_ flags. Add a description for the newly added MADV_WIPEONFORK and MADV_KEEPONFORK. Although man page has the similar information, but it'd better to keep the consistent with other flags. Link: http://lkml.kernel.org/r/1506117328-88228-1-git-send-email-yang.s@alibaba-inc.com Signed-off-by: Yang Shi <yang.s@alibaba-inc.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14lib/Kconfig.debug: kernel hacking menu: runtime testing: keep tests togetherRandy Dunlap1-72/+71
Expand the "Runtime testing" menu by including more entries inside it instead of after it. This is just Kconfig symbol movement. This causes the (arch-independent) Runtime tests to be presented (listed) all in one place instead of in multiple places. Link: http://lkml.kernel.org/r/c194e5c4-2042-bf94-a2d8-7aa13756e257@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14mm/migrate: fix indexing bug (off by one) and avoid out of bound accessMark Hairgrove1-1/+2
Index was incremented before last use and thus the second array could dereference to an invalid address (not mentioning the fact that it did not properly clear the entry we intended to clear). Link: http://lkml.kernel.org/r/1506973525-16491-1-git-send-email-jglisse@redhat.com Fixes: 8315ada7f095bf ("mm/migrate: allow migrate_vma() to alloc new page on empty entry") Signed-off-by: Mark Hairgrove <mhairgrove@nvidia.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-13iommu/amd: Finish TLB flush in amd_iommu_unmap()Joerg Roedel1-0/+1
The function only sends the flush command to the IOMMU(s), but does not wait for its completion when it returns. Fix that. Fixes: 601367d76bd1 ('x86/amd-iommu: Remove iommu_flush_domain function') Cc: stable@vger.kernel.org # >= 2.6.33 Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-10-13powerpc/perf: Fix IMC initialization crashAnju T Sudhakar1-1/+2
Panic observed with latest firmware, and upstream kernel: NIP init_imc_pmu+0x8c/0xcf0 LR init_imc_pmu+0x2f8/0xcf0 Call Trace: init_imc_pmu+0x2c8/0xcf0 (unreliable) opal_imc_counters_probe+0x300/0x400 platform_drv_probe+0x64/0x110 driver_probe_device+0x3d8/0x580 __driver_attach+0x14c/0x1a0 bus_for_each_dev+0x8c/0xf0 driver_attach+0x34/0x50 bus_add_driver+0x298/0x350 driver_register+0x9c/0x180 __platform_driver_register+0x5c/0x70 opal_imc_driver_init+0x2c/0x40 do_one_initcall+0x64/0x1d0 kernel_init_freeable+0x280/0x374 kernel_init+0x24/0x160 ret_from_kernel_thread+0x5c/0x74 While registering nest imc at init, cpu-hotplug callback nest_pmu_cpumask_init() makes an OPAL call to stop the engine. And if the OPAL call fails, imc_common_cpuhp_mem_free() is invoked to cleanup memory and cpuhotplug setup. But when cleaning up the attribute group, we are dereferencing the attribute element array without checking whether the backing element is not NULL. This causes the kernel panic. Add a check for the backing element prior to dereferencing the attribute element, to handle the failing case gracefully. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> [mpe: Trim change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-12scripts: fix faddr2line to work on last symbolNeilBrown1-2/+3
If faddr2line is given a function name which is the last one listed by "nm -n", it will fail because it never finds the next symbol. So teach the awk script to catch that possibility, and use 'size' to provide the end point of the last function. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-12drm/msm: fix _NO_IMPLICIT fencing caseRob Clark2-17/+18
We need to call reservation_object_reserve_shared() in both cases, but this wasn't happening in the _NO_IMPLICIT submit case. Fixes: f0a42bb ("drm/msm: submit support for in-fences") Reported-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/msm: fix error path cleanupRob Clark1-1/+2
If we fail to attach iommu, gpu->aspace could be IS_ERR().. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12device property: preserve usecount for node passed to ↵Niklas Söderlund1-1/+1
of_fwnode_graph_get_port_parent() Using CONFIG_OF_DYNAMIC=y uncovered an imbalance in the usecount of the node being passed to of_fwnode_graph_get_port_parent(). Preserve the usecount by using of_get_parent() instead of of_get_next_parent() which don't decrement the usecount of the node passed to it. Fixes: 3b27d00e7b6d7c88 ("device property: Move fwnode graph ops to firmware specific locations") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-12drivers: of: increase MAX_RESERVED_REGIONS to 32Stewart Smith1-1/+1
There are two types of memory reservations firmware can ask the kernel to make in the device tree: static and dynamic. See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt If you have greater than 16 entries in /reserved-memory (as we do on POWER9 systems) you would get this scary looking error message: [ 0.000000] OF: reserved mem: not enough space all defined regions. This is harmless if all your reservations are static (which with OPAL on POWER9, they are). It is not harmless if you have any dynamic reservations after the 16th. In the first pass over the fdt to find reservations, the child nodes of /reserved-memory are added to a static array in of_reserved_mem.c so that memory can be reserved in a 2nd pass. The array has 16 entries. This is why, on my dual socket POWER9 system, I get that error 4 times with 20 static reservations. We don't have a problem on ppc though, as in arch/powerpc/kernel/prom.c we look at the new style /reserved-ranges property to do reservations, and this logic was introduced in 0962e8004e974 (well before any powernv system shipped). A Google search shows up no occurances of that exact error message, so we're probably safe in that no machine that people use has memory not being reserved when it should be. The simple fix is to bump the length of the array to 32 which "should be enough for everyone(TM)". The simple fix of not recording static allocations in the array would cause problems for devices with "memory-region" properties. A more future-proof fix is likely possible, although more invasive and this simple fix is perfectly suitable in the meantime while a more future-proof fix is developed. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-12of: do not leak console optionsSergey Senozhatsky1-2/+6
Do not strdup() console options. It seems that the only reason for it to be strdup()-ed was a compilation warning: printk, UART and console drivers, for some reason, expect char pointer instead of const char pointer. So we can just pass `of_stdout_options', but need to cast it to char pointer. A better fix would be to change printk, console drivers and UART to accept const char `options'; but that will take time - there are lots of drivers to update. The patch also fixes a possible memory leak: add_preferred_console() can fail, but we don't kfree() options. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-12drm/msm/mdp5: Remove extra pm_runtime_put call in mdp5_crtc_cursor_set()Archit Taneja1-2/+0
While converting mdp5_enable/disable() calls to pm_runtime_get/put() API, an extra call to pm_runtime_put_autosuspend() crept in mdp5_crtc_cursor_set(). This results in calling the suspend handler twice, and therefore clk_disables twice, which isn't a nice thing to do. Fixes: d68fe15b1878 (drm/msm/mdp5: Use runtime PM get/put API instead ...) Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/msm/dsi: Use correct pm_runtime_put variant during host_initArchit Taneja1-1/+1
The DSI runtime PM suspend/resume callbacks check whether msm_host->cfg_hnd is non-NULL before trying to enable the bus clocks. This is done to accommodate early calls to these functions that may happen before the bus clocks are even initialized. Calling pm_runtime_put_autosuspend() in dsi_host_init() can result in racy behaviour since msm_host->cfg_hnd is set very soon after. If the suspend callback happens too late, we end up trying to disable clocks that were never enabled, resulting in a bunch of WARN_ON splats. Use pm_runtime_put_sync() so that the suspend callback is called immediately. Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12x86/apic: Update TSC_DEADLINE quirk with additional SKX steppingLen Brown1-1/+11
SKX stepping-3 fixed the TSC_DEADLINE issue in a different ucode version number than stepping-4. Linux needs to know this stepping-3 specific version number to also enable the TSC_DEADLINE on stepping-3. The steppings and ucode versions are documented in the SKX BIOS update: https://downloadmirror.intel.com/26978/eng/ReleaseNotes_R00.01.0004.txt Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Link: https://lkml.kernel.org/r/60f2bbf7cf617e212b522e663f84225bfebc50e5.1507756305.git.len.brown@intel.com
2017-10-12x86/apic: Silence "FW_BUG TSC_DEADLINE disabled due to Errata" on hypervisorsPaolo Bonzini1-1/+2
Commit 594a30fb1242 ("x86/apic: Silence "FW_BUG TSC_DEADLINE disabled due to Errata" on CPUs without the feature", 2017-08-30) was also about silencing the warning on VirtualBox; however, KVM does expose the TSC deadline timer, and it's virtualized so that it is immune from CPU errata. Therefore, booting 4.13 with "-cpu Haswell" shows this in the logs: [ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later) Even if you had a hypervisor that does _not_ virtualize the TSC deadline and rather exposes the hardware one, it should be the hypervisors task to update microcode and possibly hide the flag from CPUID. So just hide the message when running on _any_ hypervisor, not just those that do not support the TSC deadline timer. The older check still makes sense, so keep it. Fixes: bd9240a18e ("x86/apic: Add TSC_DEADLINE quirk due to errata") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1507630377-54471-1-git-send-email-pbonzini@redhat.com
2017-10-12drm/msm: fix return value check in _msm_gem_kernel_new()Wei Yongjun1-2/+2
In case of error, the function msm_gem_get_vaddr() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 8223286d62e2 ("drm/msm: Add a helper function for in-kernel buffer allocations") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/msm: use proper memory barriers for updating tail/headRob Clark1-2/+10
Fixes intermittent corruption of cmdstream dump. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/msm/mdp5: add missing max size for 8x74 v1Rob Clark1-0/+2
This should have same max width as v2. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-12drm/amdgpu: fix placement flags in amdgpu_ttm_bindChristian König1-1/+1
Otherwise we lose the NO_EVICT flag and can try to evict pinned BOs. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-12powerpc/perf: Add ___GFP_NOWARN flag to alloc_pages_node()Anju T Sudhakar1-4/+4
Stack trace output during a stress test: [ 4.310049] Freeing initrd memory: 22592K [ 4.310646] rtas_flash: no firmware flash support [ 4.313341] cpuhp/64: page allocation failure: order:0, mode:0x14480c0(GFP_KERNEL|__GFP_ZERO|__GFP_THISNODE), nodemask=(null) [ 4.313465] cpuhp/64 cpuset=/ mems_allowed=0 [ 4.313521] CPU: 64 PID: 392 Comm: cpuhp/64 Not tainted 4.11.0-39.el7a.ppc64le #1 [ 4.313588] Call Trace: [ 4.313622] [c000000f1fb1b8e0] [c000000000c09388] dump_stack+0xb0/0xf0 (unreliable) [ 4.313694] [c000000f1fb1b920] [c00000000030ef6c] warn_alloc+0x12c/0x1c0 [ 4.313753] [c000000f1fb1b9c0] [c00000000030ff68] __alloc_pages_nodemask+0xea8/0x1000 [ 4.313823] [c000000f1fb1bbb0] [c000000000113a8c] core_imc_mem_init+0xbc/0x1c0 [ 4.313892] [c000000f1fb1bc00] [c000000000113cdc] ppc_core_imc_cpu_online+0x14c/0x170 [ 4.313962] [c000000f1fb1bc90] [c000000000125758] cpuhp_invoke_callback+0x198/0x5d0 [ 4.314031] [c000000f1fb1bd00] [c00000000012782c] cpuhp_thread_fun+0x8c/0x3d0 [ 4.314101] [c000000f1fb1bd60] [c0000000001678d0] smpboot_thread_fn+0x290/0x2a0 [ 4.314169] [c000000f1fb1bdc0] [c00000000015ee78] kthread+0x168/0x1b0 [ 4.314229] [c000000f1fb1be30] [c00000000000b368] ret_from_kernel_thread+0x5c/0x74 [ 4.314313] Mem-Info: [ 4.314356] active_anon:0 inactive_anon:0 isolated_anon:0 core_imc_mem_init() at system boot use alloc_pages_node() to get memory and alloc_pages_node() throws this stack dump when tried to allocate memory from a node which has no memory behind it. Add a ___GFP_NOWARN flag in allocation request as a fix. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Venkat R.B <venkatb3@in.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-12powerpc/perf: Fix for core/nest imc call trace on cpuhotplugAnju T Sudhakar1-0/+28
Nest/core pmu units are enabled only when it is used. A reference count is maintained for the events which uses the nest/core pmu units. Currently in *_imc_counters_release function a WARN() is used for notification of any underflow of ref count. The case where event ref count hit a negative value is, when perf session is started, followed by offlining of all cpus in a given core. i.e. in cpuhotplug offline path ppc_core_imc_cpu_offline() function set the ref->count to zero, if the current cpu which is about to offline is the last cpu in a given core and make an OPAL call to disable the engine in that core. And on perf session termination, perf->destroy (core_imc_counters_release) will first decrement the ref->count for this core and based on the ref->count value an opal call is made to disable the core-imc engine. Now, since cpuhotplug path already clears the ref->count for core and disabled the engine, perf->destroy() decrementing again at event termination make it negative which in turn fires the WARN_ON. The same happens for nest units. Add a check to see if the reference count is alreday zero, before decrementing the count, so that the ref count will not hit a negative value. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by: Santosh Sivaraj <santosh@fossix.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-12MAINTAINERS: Add Paul Mackerras as maintainer for KVM/powerpcThomas Huth1-1/+1
Paul is handling almost all of the powerpc related KVM patches nowadays, so he should be mentioned in the MAINTAINERS file accordingly. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-12KVM: nVMX: fix guest CR4 loading when emulating L2 to L1 exitHaozhong Zhang1-1/+1
When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the guest CR4. Before this CR4 loading, the guest CR4 refers to L2 CR4. Because these two CR4's are in different levels of guest, we should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which is used to handle guest writes to its CR4, checks the guest change to CR4 and may fail if the change is invalid. The failure may cause trouble. Consider we start a L1 guest with non-zero L1 PCID in use, (i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0) and a L2 guest with L2 PCID disabled, (i.e. L2 CR4.PCIDE == 0) and following events may happen: 1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4 into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e. vcpu->arch.cr4) is left to the value of L2 CR4. 2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit, kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID, because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1 CR3.PCID != 0, L0 KVM will inject GP to L1 guest. Fixes: 4704d0befb072 ("KVM: nVMX: Exiting from L2 to L1") Cc: qemu-stable@nongnu.org Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-12iommu/exynos: Remove initconst attribute to avoid potential kernel oopsMarek Szyprowski1-1/+1
Exynos SYSMMU registers standard platform device with sysmmu_of_match table, what means that this table is accessed every time a new platform device is registered in a system. This might happen also after the boot, so the table must not be attributed as initconst to avoid potential kernel oops caused by access to freed memory. Fixes: 6b21a5db3642 ("iommu/exynos: Support for device tree") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-10-11ACPI: properties: Fix __acpi_node_get_property_reference() return codesSakari Ailus1-4/+6
Fix more return codes for device property: Align return codes of __acpi_node_get_property_reference(). In particular, what was missed previously: -EPROTO could be returned in certain cases, now -EINVAL; -EINVAL was returned if the property was not found, now -ENOENT; -EINVAL was returned also if the index was higher than the number of entries in a package, now -ENOENT. Reported-by: Hyungwoo Yang <hyungwoo.yang@intel.com> Fixes: 3e3119d3088f (device property: Introduce fwnode_property_get_reference_args) Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Hyungwoo Yang <hyungwoo.yang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11ACPI: properties: Align return codes of __acpi_node_get_property_reference()Sakari Ailus2-10/+13
acpi_fwnode_get_reference_args(), the function implementing ACPI support for fwnode_property_get_reference_args(), returns directly error codes from __acpi_node_get_property_reference(). The latter uses different error codes than the OF implementation. In particular, the OF implementation uses -ENOENT to indicate that the property is not found, a reference entry is empty and there are no more references. Document and align the error codes for property for fwnode_property_get_reference_args() so that they match with of_parse_phandle_with_args(). Fixes: 3e3119d3088f (device property: Introduce fwnode_property_get_reference_args) Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11remoteproc: imx_rproc: fix return value check in imx_rproc_addr_init()Wei Yongjun1-3/+2
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-10-11drm/i915/bios: parse DDI ports also for CHV for HDMI DDC pin and DP AUX channelJani Nikula1-1/+1
While technically CHV isn't DDI, we do look at the VBT based DDI port info for HDMI DDC pin and DP AUX channel. (We call these "alternate", but they're really just something that aren't platform defaults.) In commit e4ab73a13291 ("drm/i915: Respect alternate_ddc_pin for all DDI ports") Ville writes, "IIRC there may be CHV system that might actually need this." I'm not sure why there couldn't be even more platforms that need this, but start conservative, and parse the info for CHV in addition to DDI. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100553 Reported-by: Marek Wilczewski <mw@3cte.pl> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d0815082cb98487618429b62414854137049b888.1506586821.git.jani.nikula@intel.com (cherry picked from commit 348e4058ebf53904e817eec7a1b25327143c2ed2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-11xfs: handle error if xfs_btree_get_bufs failsEric Sandeen1-0/+8
Jason reported that a corrupted filesystem failed to replay the log with a metadata block out of bounds warning: XFS (dm-2): _xfs_buf_find: Block out of range: block 0x80270fff8, EOFS 0x9c40000 _xfs_buf_find() and xfs_btree_get_bufs() return NULL if that happens, and then when xfs_alloc_fix_freelist() calls xfs_trans_binval() on that NULL bp, we oops with: BUG: unable to handle kernel NULL pointer dereference at 00000000000000f8 We don't handle _xfs_buf_find errors very well, every caller higher up the stack gets to guess at why it failed. But we should at least handle it somehow, so return EFSCORRUPTED here. Reported-by: Jason L Tibbitts III <tibbs@math.uh.edu> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-10-11xfs: reinit btree pointer on attr tree inactivation walkBrian Foster1-0/+2
xfs_attr3_root_inactive() walks the attr fork tree to invalidate the associated blocks. xfs_attr3_node_inactive() recursively descends from internal blocks to leaf blocks, caching block address values along the way to revisit parent blocks, locate the next entry and descend down that branch of the tree. The code that attempts to reread the parent block is unsafe because it assumes that the local xfs_da_node_entry pointer remains valid after an xfs_trans_brelse() and re-read of the parent buffer. Under heavy memory pressure, it is possible that the buffer has been reclaimed and reallocated by the time the parent block is reread. This means that 'btree' can point to an invalid memory address, lead to a random/garbage value for child_fsb and cause the subsequent read of the attr fork to go off the rails and return a NULL buffer for an attr fork offset that is most likely not allocated. Note that this problem can be manufactured by setting XFS_ATTR_BTREE_REF to 0 to prevent LRU caching of attr buffers, creating a file with a multi-level attr fork and removing it to trigger inactivation. To address this problem, reinit the node/btree pointers to the parent buffer after it has been re-read. This ensures btree points to a valid record and allows the walk to proceed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-10-11xfs: Fix bool initialization/comparisonThomas Meyer5-8/+8
Bool initializations should use true and false. Bool tests don't need comparisons. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-10-11xfs: don't change inode mode if ACL update failsDave Chinner1-6/+16
If we get ENOSPC half way through setting the ACL, the inode mode can still be changed even though the ACL does not exist. Reorder the operation to only change the mode of the inode if the ACL is set correctly. Whilst this does not fix the problem with crash consistency (that requires attribute addition to be a deferred op) it does prevent ENOSPC and other non-fatal errors setting an xattr to be handled sanely. This fixes xfstests generic/449. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>