| Commit message (Collapse) | Author | Files | Lines |
|---|
|
current->group_leader->exit_signal may change during copy_process() if
current->real_parent exits.
Move the assignment inside tasklist_lock to avoid the race.
Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's buggy:
On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
> <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.
Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016
Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken
https://github.com/systemd/systemd/pull/3651
So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.
Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.
Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:
/* copy font from active VT, where the font was uploaded to */
cfo.op = KD_FONT_OP_COPY;
cfo.height = vcs.v_active-1; /* tty1 == index 0 */
(void) ioctl(vcfd, KDFONTOP, &cfo);
Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.
v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.
Acked-by: Peilin Ye <yepeilin.cs@gmail.com>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH <greg@kroah.com>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Gratian managed to trigger the BUG_ON(!newowner) in fixup_pi_state_owner().
This is one possible chain of events leading to this:
Task Prio Operation
T1 120 lock(F)
T2 120 lock(F) -> blocks (top waiter)
T3 50 (RT) lock(F) -> boosts T1 and blocks (new top waiter)
XX timeout/ -> wakes T2
signal
T1 50 unlock(F) -> wakes T3 (rtmutex->owner == NULL, waiter bit is set)
T2 120 cleanup -> try_to_take_mutex() fails because T3 is the top waiter
and the lower priority T2 cannot steal the lock.
-> fixup_pi_state_owner() sees newowner == NULL -> BUG_ON()
The comment states that this is invalid and rt_mutex_real_owner() must
return a non NULL owner when the trylock failed, but in case of a queued
and woken up waiter rt_mutex_real_owner() == NULL is a valid transient
state. The higher priority waiter has simply not yet managed to take over
the rtmutex.
The BUG_ON() is therefore wrong and this is just another retry condition in
fixup_pi_state_owner().
Drop the locks, so that T3 can make progress, and then try the fixup again.
Gratian provided a great analysis, traces and a reproducer. The analysis is
to the point, but it confused the hell out of that tglx dude who had to
page in all the futex horrors again. Condensed version is above.
[ tglx: Wrote comment and changelog ]
Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex")
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87a6w6x7bb.fsf@ni.com
Link: https://lore.kernel.org/r/87sg9pkvf7.fsf@nanos.tec.linutronix.de
|
|
As shown through runtime testing, the "filename" allocation is not
always freed in perf_event_parse_addr_filter().
There are three possible ways that this could happen:
- It could be allocated twice on subsequent iterations through the loop,
- or leaked on the success path,
- or on the failure path.
Clean up the code flow to make it obvious that 'filename' is always
freed in the reallocation path and in the two return paths as well.
We rely on the fact that kfree(NULL) is NOP and filename is initialized
with NULL.
This fixes the leak. No other side effects expected.
[ Dan Carpenter: cleaned up the code flow & added a changelog. ]
[ Ingo Molnar: updated the changelog some more. ]
Fixes: 375637bc5249 ("perf/core: Introduce address range filtering")
Signed-off-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
Cc: Anthony Liguori <aliguori@amazon.com>
--
kernel/events/core.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
|
|
Testing shows a problem in that UV5 hubless systems were not being
recognized. Add them to the list of OEM IDs checked.
Fixes: 6c7794423a998 ("Add UV5 direct references")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-4-mike.travis@hpe.com
|
|
Testing shows that trailing spaces caused problems with the OEM_ID and
the OEM_TABLE_ID. One being that the OEM_ID would not string compare
correctly. Another the OEM_ID and OEM_TABLE_ID would be concatenated
in the printout. Remove any trailing spaces.
Fixes: 1e61f5a95f191 ("Add and decode Arch Type in UVsystab")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-3-mike.travis@hpe.com
|
|
Testing shows a problem in that the OEM_TABLE_ID was missing for
hubless systems. This is used to determine the APIC type (legacy or
extended). Add the OEM_TABLE_ID to the early hubless processing.
Fixes: 1e61f5a95f191 ("Add and decode Arch Type in UVsystab")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-2-mike.travis@hpe.com
|
|
Implement ->read_iter for all proc "seq files" so that splice works on
them.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Implement ->read_iter for all proc "single files" so that more bionic
tests cases can pass when they call splice() on other fun files like
/proc/version
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Implement ->read_iter so that splice can be used on this file.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Implement ->read_iter so that the Android bionic test suite can use
this random proc file for its splice test case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Wire up generic_file_splice_read for the iter based proxy ops, so
that splice reads from them work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
iov_iter based variant for reading a seq_file. seq_read is
reimplemented on top of the iter variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit aa1c09cb65e2 ("null_blk: Fix locking in zoned mode") changed
zone locking to using the potentially sleeping wait_on_bit_io()
function. This is acceptable when memory backing is enabled as the
device queue is in that case marked as blocking, but this triggers a
scheduling while in atomic context with memory backing disabled.
Fix this by relying solely on the device zone spinlock for zone
information protection without temporarily releasing this lock around
null_process_cmd() execution in null_zone_write(). This is OK to do
since when memory backing is disabled, command processing does not
block and the memory backing lock nullb->lock is unused. This solution
avoids the overhead of having to mark a zoned null_blk device queue as
blocking when memory backing is unused.
This patch also adds comments to the zone locking code to explain the
unusual locking scheme.
Fixes: aa1c09cb65e2 ("null_blk: Fix locking in zoned mode")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 2ae0b31e0face ("tty: don't crash in tty_init_dev when missing
tty_port") didn't fully prevent the crash as the cleanup path in
tty_init_dev() calls release_tty() which dereferences tty->port
without checking it for non-null.
Add tty->port checks to release_tty to avoid the kernel crash.
Fixes: 2ae0b31e0face ("tty: don't crash in tty_init_dev when missing tty_port")
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20201105123432.4448-1-hias@horus.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
serial_txx9_init
Add the missing platform_driver_unregister() before return
from serial_txx9_init in the error handling case when failed
to register serial_txx9_pci_driver with macro ENABLE_SERIAL_TXX9_PCI
defined.
Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/")
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20201103084942.109076-1-miaoqinglang@huawei.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since 699cc4dfd140 (tty: serial: imx: add imx earlycon driver), the earlycon
part of imx serial is a separate driver and isn't necessarily enabled anymore
when the console is enabled. This causes users to loose the earlycon
functionality when upgrading their kenrel configuration via oldconfig.
Enable earlycon by default when IMX_SERIAL_CONSOLE is enabled.
Fixes: 699cc4dfd140 (tty: serial: imx: add imx earlycon driver)
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20201105204026.1818219-1-l.stach@pengutronix.de
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Mediatek 8250 port supports speed higher than uartclk / 16. If the baud
rates in both the new and the old termios setting are higher than
uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered.
Passing NULL as the old termios so uart_get_baud_rate() will use
uartclk / 16 - 1 as the new baud rate which will be replaced by the
original baud rate later by tty_termios_encode_baud_rate() in
mtk8250_set_termios().
Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Mimic the pre-existing ACPI and Device Tree event log behavior by not
creating the binary_bios_measurements file when the EFI TPM event log is
empty.
This fixes the following NULL pointer dereference that can occur when
reading /sys/kernel/security/tpm0/binary_bios_measurements after the
kernel received an empty event log from the firmware:
BUG: kernel NULL pointer dereference, address: 000000000000002c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 3932 Comm: fwupdtpmevlog Not tainted 5.9.0-00003-g629990edad62 #17
Hardware name: LENOVO 20LCS03L00/20LCS03L00, BIOS N27ET38W (1.24 ) 11/28/2019
RIP: 0010:tpm2_bios_measurements_start+0x3a/0x550
Code: 54 53 48 83 ec 68 48 8b 57 70 48 8b 1e 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 82 c0 06 00 00 48 8b 8a c8 06 00 00 <44> 8b 60 1c 48 89 4d a0 4c 89 e2 49 83 c4 20 48 83 fb 00 75 2a 49
RSP: 0018:ffffa9c901203db0 EFLAGS: 00010246
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000010
RDX: ffff8ba1eb99c000 RSI: ffff8ba1e4ce8280 RDI: ffff8ba1e4ce8258
RBP: ffffa9c901203e40 R08: ffffa9c901203dd8 R09: ffff8ba1ec443300
R10: ffffa9c901203e50 R11: 0000000000000000 R12: ffff8ba1e4ce8280
R13: ffffa9c901203ef0 R14: ffffa9c901203ef0 R15: ffff8ba1e4ce8258
FS: 00007f6595460880(0000) GS:ffff8ba1ef880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000002c CR3: 00000007d8d18003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? __kmalloc_node+0x113/0x320
? kvmalloc_node+0x31/0x80
seq_read+0x94/0x420
vfs_read+0xa7/0x190
ksys_read+0xa7/0xe0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In this situation, the bios_event_log pointer in the tpm_bios_log struct
was not NULL but was equal to the ZERO_SIZE_PTR (0x10) value. This was
due to the following kmemdup() in tpm_read_log_efi():
int tpm_read_log_efi(struct tpm_chip *chip)
{
...
/* malloc EventLog space */
log->bios_event_log = kmemdup(log_tbl->log, log_size, GFP_KERNEL);
if (!log->bios_event_log) {
ret = -ENOMEM;
goto out;
}
...
}
When log_size is zero, due to an empty event log from firmware,
ZERO_SIZE_PTR is returned from kmemdup(). Upon a read of the
binary_bios_measurements file, the tpm2_bios_measurements_start()
function does not perform a ZERO_OR_NULL_PTR() check on the
bios_event_log pointer before dereferencing it.
Rather than add a ZERO_OR_NULL_PTR() check in functions that make use of
the bios_event_log pointer, simply avoid creating the
binary_bios_measurements_file as is done in other event log retrieval
backends.
Explicitly ignore all of the events in the final event log when the main
event log is empty. The list of events in the final event log cannot be
accurately parsed without referring to the first event in the main event
log (the event log header) so the final event log is useless in such a
situation.
Fixes: 58cc1e4faf10 ("tpm: parse TPM event logs based on EFI table")
Link: https://lore.kernel.org/linux-integrity/E1FDCCCB-CA51-4AEE-AC83-9CDE995EAE52@canonical.com/
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Thiébaud Weksteen <tweek@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
There is a misconfiguration in the bios of the gpio pin used for the
interrupt in the T490s. When interrupts are enabled in the tpm_tis
driver code this results in an interrupt storm. This was initially
reported when we attempted to enable the interrupt code in the tpm_tis
driver, which previously wasn't setting a flag to enable it. Due to
the reports of the interrupt storm that code was reverted and we went back
to polling instead of using interrupts. Now that we know the T490s problem
is a firmware issue, add code to check if the system is a T490s and
disable interrupts if that is the case. This will allow us to enable
interrupts for everyone else. If the user has a fixed bios they can
force the enabling of interrupts with tpm_tis.interrupts=1 on the
kernel command line.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Sometimes we would get the following flow when doing an i2cset:
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
I2C_SLAVE_WRITE_RECEIVED
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204
I2C_SLAVE_WRITE_REQUESTED
I2C_SLAVE_WRITE_RECEIVED
Documentation/i2c/slave-interface.rst says that I2C_SLAVE_WRITE_REQUESTED,
which is mandatory, should be sent while the data did not arrive yet. It
means in a write-request I2C_SLAVE_WRITE_REQUESTED should be reported
before any I2C_SLAVE_WRITE_RECEIVED.
By the way, I2C_SLAVE_STOP didn't be reported in the above case because
DW_IC_INTR_STAT was not 0x200.
dev->status can be used to record the current state, especially Designware
I2C controller has no interrupts to identify a write-request. This patch
makes not only I2C_SLAVE_WRITE_REQUESTED been reported first when
IC_INTR_RX_FULL is rising and dev->status isn't STATUS_WRITE_IN_PROGRESS
but also I2C_SLAVE_STOP been reported when a STOP condition is received.
Signed-off-by: Michael Wu <michael.wu@vatics.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
If some bits were cleared by i2c_dw_read_clear_intrbits_slave() in
i2c_dw_isr_slave() and not handled immediately, those cleared bits would
not be shown again by later i2c_dw_read_clear_intrbits_slave(). They
therefore were forgotten to be handled.
i2c_dw_read_clear_intrbits_slave() should be called once in an ISR and take
its returned state for all later handlings.
Signed-off-by: Michael Wu <michael.wu@vatics.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The Mellanox BlueField I2C controller is only present on Mellanox
BlueField SoCs. Hence add a dependency on MELLANOX_PLATFORM, to prevent
asking the user about this driver when configuring a kernel without
Mellanox platform support.
Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Correct the email addresses of the author and the maintainer
of the Mellanox BlueField I2C driver.
Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The reference clock frequency remains the same across Bluefield
products. Thus, update the frequency and rename the macro.
Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Few wrapper functions are useless and can be inlined. So
delete mlxbf_i2c_read() and mlxbf_i2c_write() and replace
them with readl() and writel(), respectively. Also delete
mlxbf_i2c_read_data() and mlxbf_i2c_write() and replace
them with ioread32be() and iowrite32be(), respectively.
Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Address warnings "warning: cast to restricted __be32" reported
by sparse.
Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The build fails with "implicit declaration of function
'acpi_device_uid'" error. Thus, protect ACPI function calls
from being called when CONFIG_ACPI is disabled.
Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Implements atomic transfers to fix reboot/shutdown on r8a7790 Lager and
similar boards.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
[wsa: some whitespace fixing]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Removing the duplicate gpio chip select level handling in
bcm2835_spi_setup() left the lflags variable uninitialized. Avoid trhe
use of such variable by passing default flags to
gpiochip_request_own_desc().
Fixes: 5e31ba0c0543 ("spi: bcm2835: fix gpio cs level inversion")
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/r/20201105090615.620315-1-martin@geanix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() will increment pm usage at first and it
will resume the device later. If runtime of the device has
error or device is in inaccessible state(or other error state),
resume operation will fail. If we do not call put operation to
decrease the reference, the result is that this device cannot
enter the idle state and always stay busy or other non-idle
state.
Fixes: 249fa8217b846 ("USB: Add driver to control USB fast charge for iOS devices")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102022650.67115-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes a possible issue when mtu3_gadget_stop()
already assigned NULL to mtu->gadget_driver during mtu_gadget_disconnect().
[<ffffff9008161974>] notifier_call_chain+0xa4/0x128
[<ffffff9008161fd4>] __atomic_notifier_call_chain+0x84/0x138
[<ffffff9008162ec0>] notify_die+0xb0/0x120
[<ffffff900809e340>] die+0x1f8/0x5d0
[<ffffff90080d03b4>] __do_kernel_fault+0x19c/0x280
[<ffffff90080d04dc>] do_bad_area+0x44/0x140
[<ffffff90080d0f9c>] do_translation_fault+0x4c/0x90
[<ffffff9008080a78>] do_mem_abort+0xb8/0x258
[<ffffff90080849d0>] el1_da+0x24/0x3c
[<ffffff9009bde01c>] mtu3_gadget_disconnect+0xac/0x128
[<ffffff9009bd576c>] mtu3_irq+0x34c/0xc18
[<ffffff90082ac03c>] __handle_irq_event_percpu+0x2ac/0xcd0
[<ffffff90082acae0>] handle_irq_event_percpu+0x80/0x138
[<ffffff90082acc44>] handle_irq_event+0xac/0x148
[<ffffff90082b71cc>] handle_fasteoi_irq+0x234/0x568
[<ffffff90082a8708>] generic_handle_irq+0x48/0x68
[<ffffff90082a96ac>] __handle_domain_irq+0x264/0x1740
[<ffffff90080819f4>] gic_handle_irq+0x14c/0x250
[<ffffff9008084cec>] el1_irq+0xec/0x194
[<ffffff90085b985c>] dma_pool_alloc+0x6e4/0xae0
[<ffffff9008d7f890>] cmdq_mbox_pool_alloc_impl+0xb0/0x238
[<ffffff9008d80904>] cmdq_pkt_alloc_buf+0x2dc/0x7c0
[<ffffff9008d80f60>] cmdq_pkt_add_cmd_buffer+0x178/0x270
[<ffffff9008d82320>] cmdq_pkt_perf_begin+0x108/0x148
[<ffffff9008d824d8>] cmdq_pkt_create+0x178/0x1f0
[<ffffff9008f96230>] mtk_crtc_config_default_path+0x328/0x7a0
[<ffffff90090246cc>] mtk_drm_idlemgr_kick+0xa6c/0x1460
[<ffffff9008f9bbb4>] mtk_drm_crtc_atomic_begin+0x1a4/0x1a68
[<ffffff9008e8df9c>] drm_atomic_helper_commit_planes+0x154/0x878
[<ffffff9008f2fb70>] mtk_atomic_complete.isra.16+0xe80/0x19c8
[<ffffff9008f30910>] mtk_atomic_commit+0x258/0x898
[<ffffff9008ef142c>] drm_atomic_commit+0xcc/0x108
[<ffffff9008ef7cf0>] drm_mode_atomic_ioctl+0x1c20/0x2580
[<ffffff9008ebc768>] drm_ioctl_kernel+0x118/0x1b0
[<ffffff9008ebcde8>] drm_ioctl+0x5c0/0x920
[<ffffff900863b030>] do_vfs_ioctl+0x188/0x1820
[<ffffff900863c754>] SyS_ioctl+0x8c/0xa0
Fixes: df2069acb005 ("usb: Add MediaTek USB3 DRD driver")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1604642069-20961-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We were relying on GNU ld's ability to re-link executable files in order
to extract our VDSO symbols. This behavior was deemed a bug as of
binutils-2.35 (specifically the binutils-gdb commit a87e1817a4 ("Have
the linker fail if any attempt to link in an executable is made."), but
as that has been backported to at least Debian's binutils-2.34 in may
manifest in other places.
The previous version of this was a bit of a mess: we were linking a
static executable version of the VDSO, containing only a subset of the
input symbols, which we then linked into the kernel. This worked, but
certainly wasn't a supported path through the toolchain. Instead this
new version parses the textual output of nm to produce a symbol table.
Both rely on near-zero addresses being linkable, but as we rely on weak
undefined symbols being linkable elsewhere I don't view this as a major
issue.
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Currently, we use PGD mappings for early DTB mapping in early_pgd
but this breaks Linux kernel on SiFive Unleashed because on SiFive
Unleashed PMP checks don't work correctly for PGD mappings.
To fix early DTB mappings on SiFive Unleashed, we use non-PGD
mappings (i.e. PMD) for early DTB access.
Fixes: 8f3a2b4a96dc ("RISC-V: Move DT mapping outof fixmap")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The copy_from_kernel_nofault() is broken on riscv because the 'dst' and
'src' are mistakenly reversed in __put_kernel_nofault() macro.
copy_to_kernel_nofault:
...
0xffffffe0003159b8 <+30>: sd a4,0(a1) # a1 aka 'src'
Fixes: d464118cdc ("riscv: implement __get_kernel_nofault and __put_user_nofault")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The argument to pfn_to_virt() should be pfn not the value of CSR_SATP.
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: liush <liush@allwinnertech.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Add a non-NUMA definition for of_drconf_to_nid_single() to topology.h
so we have one even if powerpc/mm/numa.c is not compiled. On a
non-NUMA kernel the appropriate node id is always first_online_node.
Fixes: 72cdd117c449 ("pseries/hotplug-memory: hot-add: skip redundant LMB lookup")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201105223040.3612663-1-cheloha@linux.ibm.com
|
|
M-Mode Linux is loaded at the start of RAM, not 2MB later. Perhaps this
should be calculated based on PAGE_OFFSET somehow? Even better would be to
deprecate text_offset and instead introduce something absolute.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
We can't just go over linked requests because it may race with linked
timeouts. Take ctx->completion_lock in that case.
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's possible that the first region picked for the new kernel will make
it impossible to fit the other segments in the required 32GB window,
especially if we have a very large initrd.
Instead of giving up, we can keep testing other regions for the kernel
until we find one that works.
Suggested-by: Ryan O'Leary <ryanoleary@google.com>
Signed-off-by: Benjamin Gwin <bgwin@google.com>
Link: https://lore.kernel.org/r/20201103201106.2397844-1-bgwin@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
always-on STIBP
On AMD CPUs which have the feature X86_FEATURE_AMD_STIBP_ALWAYS_ON,
STIBP is set to on and
spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED
At the same time, IBPB can be set to conditional.
However, this leads to the case where it's impossible to turn on IBPB
for a process because in the PR_SPEC_DISABLE case in ib_prctl_set() the
spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED
condition leads to a return before the task flag is set. Similarly,
ib_prctl_get() will return PR_SPEC_DISABLE even though IBPB is set to
conditional.
More generally, the following cases are possible:
1. STIBP = conditional && IBPB = on for spectre_v2_user=seccomp,ibpb
2. STIBP = on && IBPB = conditional for AMD CPUs with
X86_FEATURE_AMD_STIBP_ALWAYS_ON
The first case functions correctly today, but only because
spectre_v2_user_ibpb isn't updated to reflect the IBPB mode.
At a high level, this change does one thing. If either STIBP or IBPB
is set to conditional, allow the prctl to change the task flag.
Also, reflect that capability when querying the state. This isn't
perfect since it doesn't take into account if only STIBP or IBPB is
unconditionally on. But it allows the conditional feature to work as
expected, without affecting the unconditional one.
[ bp: Massage commit message and comment; space out statements for
better readability. ]
Fixes: 21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20201105163246.v2.1.Ifd7243cd3e2c2206a893ad0a5b9a4f19549e22c6@changeid
|
|
Check for corner case of port_init failure before using
the port_info pointer.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20201104195606.61184-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RISC-V limits the physical memory size by -PAGE_OFFSET. Any memory beyond
that size from DRAM start is unusable. Just remove any memblock pointing
to those memory region without worrying about computing the maximum size.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
XFAIL is gone since commit 9847d24af95c ("selftests/harness: Refactor XFAIL
into SKIP"), use SKIP instead.
Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
XFAIL is gone since commit 9847d24af95c ("selftests/harness: Refactor XFAIL
into SKIP"), use SKIP instead.
Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
XFAIL is gone since commit 9847d24af95c ("selftests/harness: Refactor XFAIL
into SKIP"), use SKIP instead.
Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Makefile already contains -D_GNU_SOURCE, so we can remove it from the
*.c files.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Previous commit changed how we index the registered credentials, but
neglected to update one spot that is used when the personalities are
iterated through ->show_fdinfo(). Ensure we use the right struct type
for the iteration.
Reported-by: syzbot+a6d494688cdb797bdfce@syzkaller.appspotmail.com
Fixes: 1e6fa5216a0e ("io_uring: COW io_identity on mismatch")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If there is a long-standing request of one task locking up execution of
deferred requests, and the defer list contains requests of another task
(all files-less), then a potential execution of __io_uring_task_cancel()
by that another task will sleep until that first long-standing request
completion, and that may take long.
E.g.
tsk1: req1/read(empty_pipe) -> tsk2: req(DRAIN)
Then __io_uring_task_cancel(tsk2) waits for req1 completion.
It seems we even can manufacture a complicated case with many tasks
sharing many rings that can lock them forever.
Cancel deferred requests for __io_uring_task_cancel() as well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
htmldocs fails with:
drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent'
Fixes: 372a1786283e ("IB/srpt: Fix memory leak in srpt_add_one")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
