summaryrefslogtreecommitdiffstats
path: root/net/bridge (follow)
Commit message (Collapse)AuthorAgeFilesLines
* bridge: Fix a deadlock when enabling multicast snoopingJoseph Huang2020-12-083-9/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When enabling multicast snooping, bridge module deadlocks on multicast_lock if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2 network. The deadlock was caused by the following sequence: While holding the lock, br_multicast_open calls br_multicast_join_snoopers, which eventually causes IP stack to (attempt to) send out a Listener Report (in igmp6_join_group). Since the destination Ethernet address is a multicast address, br_dev_xmit feeds the packet back to the bridge via br_multicast_rcv, which in turn calls br_multicast_add_group, which then deadlocks on multicast_lock. The fix is to move the call br_multicast_join_snoopers outside of the critical section. This works since br_multicast_join_snoopers only deals with IP and does not modify any multicast data structures of the bridge, so there's no need to hold the lock. Steps to reproduce: 1. sysctl net.ipv6.conf.all.force_mld_version=1 2. have another querier 3. ip link set dev bridge type bridge mcast_snooping 0 && \ ip link set dev bridge type bridge mcast_snooping 1 < deadlock > A typical call trace looks like the following: [ 936.251495] _raw_spin_lock+0x5c/0x68 [ 936.255221] br_multicast_add_group+0x40/0x170 [bridge] [ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge] [ 936.265322] br_dev_xmit+0x140/0x368 [bridge] [ 936.269689] dev_hard_start_xmit+0x94/0x158 [ 936.273876] __dev_queue_xmit+0x5ac/0x7f8 [ 936.277890] dev_queue_xmit+0x10/0x18 [ 936.281563] neigh_resolve_output+0xec/0x198 [ 936.285845] ip6_finish_output2+0x240/0x710 [ 936.290039] __ip6_finish_output+0x130/0x170 [ 936.294318] ip6_output+0x6c/0x1c8 [ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8 [ 936.301834] igmp6_send+0x358/0x558 [ 936.305326] igmp6_join_group.part.0+0x30/0xf0 [ 936.309774] igmp6_group_added+0xfc/0x110 [ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290 [ 936.317885] ipv6_dev_mc_inc+0x10/0x18 [ 936.321677] br_multicast_open+0xbc/0x110 [bridge] [ 936.326506] br_multicast_toggle+0xec/0x140 [bridge] Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: bridge: vlan: fix error return code in __vlan_add()Zhang Changzhong2020-12-051-1/+3
| | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: f8ed289fab84 ("bridge: vlan: use br_vlan_(get|put)_master to deal with refcounts") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/1607071737-33875-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* netfilter: bridge: reset skb->pkt_type after NF_INET_POST_ROUTING traversalAntoine Tenart2020-11-281-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the hooks as, while it's an expected value for a bridge, routing expects PACKET_HOST. The change is undone later on after hook traversal. This can be seen with pairs of functions updating skb>pkt_type and then reverting it to its original value: For hook NF_INET_PRE_ROUTING: setup_pre_routing / br_nf_pre_routing_finish For hook NF_INET_FORWARD: br_nf_forward_ip / br_nf_forward_finish But the third case where netfilter does this, for hook NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing but never reverted. A comment says: /* We assume any code from br_dev_queue_push_xmit onwards doesn't care * about the value of skb->pkt_type. */ But when having a tunnel (say vxlan) attached to a bridge we have the following call trace: br_nf_pre_routing br_nf_pre_routing_ipv6 br_nf_pre_routing_finish br_nf_forward_ip br_nf_forward_finish br_nf_post_routing <- pkt_type is updated to PACKET_HOST br_nf_dev_queue_xmit <- but not reverted to its original value vxlan_xmit vxlan_xmit_one skb_tunnel_check_pmtu <- a check on pkt_type is performed In this specific case, this creates issues such as when an ICMPv6 PTB should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST and returns early). If the comment is right and no one cares about the value of skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting it to its original value should be safe. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: bridge: add missing counters to ndo_get_stats64 callbackHeiner Kallweit2020-11-171-0/+1
| | | | | | | | | | | In br_forward.c and br_input.c fields dev->stats.tx_dropped and dev->stats.multicast are populated, but they are ignored in ndo_get_stats64. Fixes: 28172739f0a2 ("net: fix 64 bit counters on 32 bit arches") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/58ea9963-77ad-a7cf-8dfd-fc95ab95f606@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* netfilter: ebtables: Fixes dropping of small packets in bridge natTimothée COCAULT2020-10-203-3/+3
| | | | | | | | | | | | Fixes an error causing small packets to get dropped. skb_ensure_writable expects the second parameter to be a length in the ethernet payload.=20 If we want to write the ethernet header (src, dst), we should pass 0. Otherwise, packets with small payloads (< ETH_ALEN) will get dropped. Fixes: c1a831167901 ("netfilter: bridge: convert skb_make_writable to skb_ensure_writable") Signed-off-by: Timothée COCAULT <timothee.cocault@orange.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* net: bridge: use new function dev_fetch_sw_netstatsHeiner Kallweit2020-10-141-20/+1
| | | | | | | | Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/d1c3ff29-5691-9d54-d164-16421905fa59@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2020-10-091-15/+11
|\ | | | | | | | | | | | | | | Small conflict around locking in rxrpc_process_event() - channel_lock moved to bundle in next, while state lock needs _bh() from net. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * bridge: Netlink interface fix.Henrik Bjoernlund2020-10-081-15/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit is correcting NETLINK br_fill_ifinfo() to be able to handle 'filter_mask' with multiple flags asserted. Fixes: 36a8e8e265420 ("bridge: Extend br_fill_ifinfo to return MPR status") Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2020-10-063-15/+33
|\| | | | | | | | | | | | | | | | | | | | | Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: core: introduce struct netdev_nested_priv for nested interface ↵Taehee Yoo2020-09-292-15/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | infrastructure Functions related to nested interface infrastructure such as netdev_walk_all_{ upper | lower }_dev() pass both private functions and "data" pointer to handle their own things. At this point, the data pointer type is void *. In order to make it easier to expand common variables and functions, this new netdev_nested_priv structure is added. In the following patch, a new member variable will be added into this struct to fix the lockdep issue. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bridge: fdb: don't flush ext_learn entriesNikolay Aleksandrov2020-09-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a user-space software manages fdb entries externally it should set the ext_learn flag which marks the fdb entry as externally managed and avoids expiring it (they're treated as static fdbs). Unfortunately on events where fdb entries are flushed (STP down, netlink fdb flush etc) these fdbs are also deleted automatically by the bridge. That in turn causes trouble for the managing user-space software (e.g. in MLAG setups we lose remote fdb entries on port flaps). These entries are completely externally managed so we should avoid automatically deleting them, the only exception are offloaded entries (i.e. BR_FDB_ADDED_BY_EXT_LEARN + BR_FDB_OFFLOADED). They are flushed as before. Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: remove only S,G port groups from sg_port hashNikolay Aleksandrov2020-09-261-4/+5
| | | | | | | | | | | | | | | | | | | | We should remove a group from the sg_port hash only if it's an S,G entry. This makes it correct and more symmetric with group add. Also since *,G groups are not added to that hash we can hide a bug. Fixes: 085b53c8beab ("net: bridge: mcast: add sg_port rhashtable") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: when forwarding handle filter mode and blocked flagNikolay Aleksandrov2020-09-231-1/+14
| | | | | | | | | | | | | | | | We need to avoid forwarding to ports in MCAST_INCLUDE filter mode when the mdst entry is a *,G or when the port has the blocked flag. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: handle host stateNikolay Aleksandrov2020-09-231-0/+58
| | | | | | | | | | | | | | | | | | | | Since host joins are considered as EXCLUDE {} joins we need to reflect that in all of *,G ports' S,G entries. Since the S,Gs can have host_joined == true only set automatically we can safely set it to false when removing all automatically added entries upon S,G delete. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: add support for blocked port groupsNikolay Aleksandrov2020-09-233-6/+46
| | | | | | | | | | | | | | | | | | | | When excluding S,G entries we need a way to block a particular S,G,port. The new port group flag is managed based on the source's timer as per RFCs 3376 and 3810. When a source expires and its port group is in EXCLUDE mode, it will be blocked. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: handle port group filter modesNikolay Aleksandrov2020-09-233-2/+215
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to handle group filter mode transitions and initial state. To change a port group's INCLUDE -> EXCLUDE mode (or when we have added a new port group in EXCLUDE mode) we need to add that port to all of *,G ports' S,G entries for proper replication. When the EXCLUDE state is changed from IGMPv3 report, br_multicast_fwd_filter_exclude() must be called after the source list processing because the assumption is that all of the group's S,G entries will be created before transitioning to EXCLUDE mode, i.e. most importantly its blocked entries will already be added so it will not get automatically added to them. The transition EXCLUDE -> INCLUDE happens only when a port group timer expires, it requires us to remove that port from all of *,G ports' S,G entries where it was automatically added previously. Finally when we are adding a new S,G entry we must add all of *,G's EXCLUDE ports to it. In order to distinguish automatically added *,G EXCLUDE ports we have a new port group flag - MDB_PG_FLAGS_STAR_EXCL. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: install S,G entries automatically based on reportsNikolay Aleksandrov2020-09-232-39/+138
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for automatic install of S,G mdb entries based on the port group's source list and the source entry's timer. Once installed the S,G will be used when forwarding packets if the approprate multicast/mld versions are set. A new source flag called BR_SGRP_F_INSTALLED denotes if the source has a forwarding mdb entry installed. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: add sg_port rhashtableNikolay Aleksandrov2020-09-234-65/+111
| | | | | | | | | | | | | | | | | | | | To speedup S,G forward handling we need to be able to quickly find out if a port is a member of an S,G group. To do that add a global S,G port rhashtable with key: source addr, group addr, protocol, vid (all br_ip fields) and port pointer. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: add rt_protocol field to the port group structNikolay Aleksandrov2020-09-233-19/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | We need to be able to differentiate between pg entries created by user-space and the kernel when we start generating S,G entries for IGMPv3/MLDv2's fast path. User-space entries are created by default as RTPROT_STATIC and the kernel entries are RTPROT_KERNEL. Later we can allow user-space to provide the entry rt_protocol so we can differentiate between who added the entries specifically (e.g. clag, admin, frr etc). Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: when igmpv3/mldv2 are enabled lookup (S,G) first, then (*,G)Nikolay Aleksandrov2020-09-231-0/+18
| | | | | | | | | | | | | | | | If (S,G) entries are enabled (igmpv3/mldv2) then look them up first. If there isn't a present (S,G) entry then try to find (*,G). Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mdb: add support for add/del/dump of entries with sourceNikolay Aleksandrov2020-09-232-28/+128
| | | | | | | | | | | | | | | | | | | | | | | | Add new mdb attributes (MDBE_ATTR_SOURCE for setting, MDBA_MDB_EATTR_SOURCE for dumping) to allow add/del and dump of mdb entries with a source address (S,G). New S,G entries are created with filter mode of MCAST_INCLUDE. The same attributes are used for IPv4 and IPv6, they're validated and parsed based on their protocol. S,G host joined entries which are added by user are not allowed yet. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mdb: add support to extend add/del commandsNikolay Aleksandrov2020-09-231-3/+19
| | | | | | | | | | | | | | | | | | | | | | | | Since the MDB add/del code expects an exact struct br_mdb_entry we can't really add any extensions, thus add a new nested attribute at the level of MDBA_SET_ENTRY called MDBA_SET_ENTRY_ATTRS which will be used to pass all new options via netlink attributes. This patch doesn't change anything functionally since the new attribute is not used yet, only parsed. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: rename br_ip's u member to dstNikolay Aleksandrov2020-09-232-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since now we have src in br_ip, u no longer makes sense so rename it to dst. No functional changes. v2: fix build with CONFIG_BATMAN_ADV_MCAST CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sven Eckelmann <sven@narfation.org> CC: b.a.t.m.a.n@lists.open-mesh.org Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: use br_ip's src for src groups and querier addressNikolay Aleksandrov2020-09-232-30/+30
| | | | | | | | | | | | | | | | | | Now that we have src and dst in br_ip it is logical to use the src field for the cases where we need to work with a source address such as querier source address and group source address. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mdb: use extack in br_mdb_add() and br_mdb_add_group()Nikolay Aleksandrov2020-09-231-12/+42
| | | | | | | | | | | | | | Pass and use extack all the way down to br_mdb_add_group(). Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mdb: move all port and bridge checks to br_mdb_addNikolay Aleksandrov2020-09-231-17/+7
| | | | | | | | | | | | | | | | | | | | To avoid doing duplicate device checks and searches (the same were done in br_mdb_add and __br_mdb_add) pass the already found port to __br_mdb_add and pull the bridge's netif_running and enabled multicast checks to br_mdb_add. This would also simplify the future extack errors. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mdb: use extack in br_mdb_parse()Nikolay Aleksandrov2020-09-231-21/+39
| | | | | | | | | | | | | | | | We can drop the pr_info() calls and just use extack to return a meaningful error to user-space when br_mdb_parse() fails. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2020-09-231-10/+17
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCUVladimir Oltean2020-09-221-10/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When calling the RCU brother of br_vlan_get_pvid(), lockdep warns: ============================= WARNING: suspicious RCU usage 5.9.0-rc3-01631-g13c17acb8e38-dirty #814 Not tainted ----------------------------- net/bridge/br_private.h:1054 suspicious rcu_dereference_protected() usage! Call trace: lockdep_rcu_suspicious+0xd4/0xf8 __br_vlan_get_pvid+0xc0/0x100 br_vlan_get_pvid_rcu+0x78/0x108 The warning is because br_vlan_get_pvid_rcu() calls nbp_vlan_group() which calls rtnl_dereference() instead of rcu_dereference(). In turn, rtnl_dereference() calls rcu_dereference_protected() which assumes operation under an RCU write-side critical section, which obviously is not the case here. So, when the incorrect primitive is used to access the RCU-protected VLAN group pointer, READ_ONCE() is not used, which may cause various unexpected problems. I'm sad to say that br_vlan_get_pvid() and br_vlan_get_pvid_rcu() cannot share the same implementation. So fix the bug by splitting the 2 functions, and making br_vlan_get_pvid_rcu() retrieve the VLAN groups under proper locking annotations. Fixes: 7582f5b70f9a ("bridge: add br_vlan_get_pvid_rcu()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: delete duplicated wordsRandy Dunlap2020-09-182-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Drop repeated words in net/bridge/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Nikolay Aleksandrov <nikolay@nvidia.com> Cc: bridge@lists.linux-foundation.org Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: mcast: don't ignore return value of __grp_src_toex_exclNikolay Aleksandrov2020-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | When we're handling TO_EXCLUDE report in EXCLUDE filter mode we should not ignore the return value of __grp_src_toex_excl() as we'll miss sending notifications about group changes. Fixes: 5bf1e00b6849 ("net: bridge: mcast: support for IGMPV3/MLDv2 CHANGE_TO_INCLUDE/EXCLUDE report") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bridge: Add SWITCHDEV_FDB_FLUSH_TO_BRIDGE notifierAlexandra Winter2020-09-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | so the switchdev can notifiy the bridge to flush non-permanent fdb entries for this port. This is useful whenever the hardware fdb of the switchdev is reset, but the netdev and the bridgeport are not deleted. Note that this has the same effect as the IFLA_BRPORT_FLUSH attribute. CC: Jiri Pirko <jiri@resnulli.us> CC: Ivan Vecera <ivecera@redhat.com> CC: Roopa Prabhu <roopa@nvidia.com> CC: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bridge: mcast: Fix incomplete MDB dumpIdo Schimmel2020-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each MDB entry is encoded in a nested netlink attribute called 'MDBA_MDB_ENTRY'. In turn, this attribute contains another nested attributed called 'MDBA_MDB_ENTRY_INFO', which encodes a single port group entry within the MDB entry. The cited commit added the ability to restart a dump from a specific port group entry. However, on failure to add a port group entry to the dump the entire MDB entry (stored in 'nest2') is removed, resulting in missing port group entries. Fix this by finalizing the MDB entry with the partial list of already encoded port group entries. Fixes: 5205e919c9f0 ("net: bridge: mcast: add support for src list and filter mode dumping") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller2020-09-091-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Rewrite inner header IPv6 in ICMPv6 messages in ip6t_NPT, from Michael Zhou. 2) do_ip_vs_set_ctl() dereferences uninitialized value, from Peilin Ye. 3) Support for userdata in tables, from Jose M. Guisado. 4) Do not increment ct error and invalid stats at the same time, from Florian Westphal. 5) Remove ct ignore stats, also from Florian. 6) Add ct stats for clash resolution, from Florian Westphal. 7) Bump reference counter bump on ct clash resolution only, this is safe because bucket lock is held, again from Florian. 8) Use ip_is_fragment() in xt_HMARK, from YueHaibing. 9) Add wildcard support for nft_socket, from Balazs Scheidler. 10) Remove superfluous IPVS dependency on iptables, from Yaroslav Bolyukin. 11) Remove unused definition in ebt_stp, from Wang Hai. 12) Replace CONFIG_NFT_CHAIN_NAT_{IPV4,IPV6} by CONFIG_NFT_NAT in selftests/net, from Fabian Frederick. 13) Add userdata support for nft_object, from Jose M. Guisado. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | netfilter: ebt_stp: Remove unused macro BPDU_TYPE_TCNWang Hai2020-09-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | BPDU_TYPE_TCN is never used after it was introduced. So better to remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | | net: bridge: mcast: fix unused br var when lockdep isn't definedNikolay Aleksandrov2020-09-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stephen reported the following warning: net/bridge/br_multicast.c: In function 'br_multicast_find_port': net/bridge/br_multicast.c:1818:21: warning: unused variable 'br' [-Wunused-variable] 1818 | struct net_bridge *br = mp->br; | ^~ It happens due to bridge's mlock_dereference() when lockdep isn't defined. Silence the warning by annotating the variable as __maybe_unused. Fixes: 0436862e417e ("net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: bridge: mcast: destroy all entries via gcNikolay Aleksandrov2020-09-072-42/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since each entry type has timers that can be running simultaneously we need to make sure that entries are not freed before their timers have finished. In order to do that generalize the src gc work to mcast gc work and use a callback to free the entries (mdb, port group or src). v3: add IPv6 support v2: force mcast gc on port del to make sure all port group timers have finished before freeing the bridge port Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: improve IGMPv3/MLDv2 query processingNikolay Aleksandrov2020-09-071-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an IGMPv3/MLDv2 query is received and we're operating in such mode then we need to avoid updating group timers if the suppress flag is set. Also we should update only timers for groups in exclude mode. v3: add IPv6/MLDv2 support Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: support for IGMPV3/MLDv2 BLOCK_OLD_SOURCES reportNikolay Aleksandrov2020-09-071-0/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We already have all necessary helpers, so process IGMPV3/MLDv2 BLOCK_OLD_SOURCES as per the RFCs. v3: add IPv6/MLDv2 support v2: directly do flag bit operations Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: support for IGMPV3/MLDv2 CHANGE_TO_INCLUDE/EXCLUDE reportNikolay Aleksandrov2020-09-071-0/+306
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to process IGMPV3/MLDv2 CHANGE_TO_INCLUDE/EXCLUDE report types we need new helpers which allow us to mark entries based on their timer state and to query only marked entries. v3: add IPv6/MLDv2 support, fix other_query checks v2: directly do flag bit operations Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: support for IGMPV3/MLDv2 MODE_IS_INCLUDE/EXCLUDE reportNikolay Aleksandrov2020-09-071-0/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to process IGMPV3/MLDv2_MODE_IS_INCLUDE/EXCLUDE report types we need some new helpers which allow us to set/clear flags for all current entries and later delete marked entries after the report sources have been processed. v3: add IPv6/MLDv2 support v2: drop flag helpers and directly do flag bit operations Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES reportNikolay Aleksandrov2020-09-072-22/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds handling for the ALLOW_NEW_SOURCES IGMPv3/MLDv2 report types and limits them only when multicast_igmp_version == 3 or multicast_mld_version == 2 respectively. Now that IGMPv3/MLDv2 handling functions will be managing timers we need to delay their activation, thus a new argument is added which controls if the timer should be updated. We also disable host IGMPv3/MLDv2 handling as it's not yet implemented and could cause inconsistent group state, the host can only join a group as EXCLUDE {} or leave it. v4: rename update_timer to igmpv2_mldv1 and use the passed value from br_multicast_add_group's callers v3: Add IPv6/MLDv2 support Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: delete expired port groups without srcsNikolay Aleksandrov2020-09-071-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an expired port group is in EXCLUDE mode, then we have to turn it into INCLUDE mode, remove all srcs with zero timer and finally remove the group itself if there are no more srcs with an active timer. For IGMPv2 use there would be no sources, so this will reduce to just removing the group as before. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mdb: use mdb and port entries in notificationsNikolay Aleksandrov2020-09-073-68/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have to use mdb and port entries when sending mdb notifications in order to fill in all group attributes properly. Before this change we would've used a fake br_mdb_entry struct to fill in only partial information about the mdb. Now we can also reuse the mdb dump fill function and thus have only a single central place which fills the mdb attributes. v3: add IPv6 support Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mdb: push notifications in __br_mdb_add/delNikolay Aleksandrov2020-09-071-12/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | This change is in preparation for using the mdb port group entries when sending a notification, so their full state and additional attributes can be filled in. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: add support for group query retransmitNikolay Aleksandrov2020-09-072-10/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to be able to retransmit group-specific and group-and-source specific queries. The new timer takes care of those. v3: add IPv6 support Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: add support for group-and-source specific queriesNikolay Aleksandrov2020-09-072-54/+183
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allows br_multicast_alloc_query to build queries with the port group's source lists and sends a query for sources over and under lmqt when necessary as per RFCs 3376 and 3810 with the suppress flag set appropriately. v3: add IPv6 support Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: add support for src list and filter mode dumpingNikolay Aleksandrov2020-09-071-2/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support per port group src list (address and timer) and filter mode dumping. Protected by either multicast_lock or rcu. v3: add IPv6 support v2: require RCU or multicast_lock to traverse src groups Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: add support for group source listNikolay Aleksandrov2020-09-073-14/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initial functions for group source lists which are needed for IGMPv3 and MLDv2 include/exclude lists. Both IPv4 and IPv6 sources are supported. User-added mdb entries are created with exclude filter mode, we can extend that later to allow user-supplied mode. When group src entries are deleted, they're freed from a workqueue to make sure their timers are not still running. Source entries are protected by the multicast_lock and rcu. The number of src groups per port group is limited to 32. v4: use the new port group del function directly add igmpv2/mldv1 bool to denote if the entry was added in those modes, it will later replace the old update_timer bool v3: add IPv6 support v2: allow src groups to be traversed under rcu Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | net: bridge: mcast: factor out port group delNikolay Aleksandrov2020-09-073-35/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to avoid future errors and reduce code duplication we should factor out the port group del sequence. This allows us to have one function which takes care of all details when removing a port group. v4: set pg's fast leave flag when deleting due to fast leave move the patch before adding source lists Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 14:15:05 +0100