summaryrefslogtreecommitdiffstats
path: root/net/dsa (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net: dsa: tag_ksz: KSZ8795 and KSZ9477 also use tail tagsChristian Eggers2020-10-201-0/+2
| | | | | | | | | | | The Marvell 88E6060 uses tag_trailer.c and the KSZ8795, KSZ9477 and KSZ9893 switches also use tail tags. Fixes: 7a6ffe764be3 ("net: dsa: point out the tail taggers") Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201016171603.10587-1-ceggers@arri.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: use new function dev_fetch_sw_netstatsHeiner Kallweit2020-10-141-20/+1
| | | | | | | | | | Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/b6047017-8226-6b7e-a3cd-064e69fdfa27@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: tag_ocelot: use VLAN information from tagging header when availableVladimir Oltean2020-10-111-0/+34
| | | | | | | | When the Extraction Frame Header contains a valid classified VLAN, use that instead of the VLAN header present in the packet. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: propagate switchdev vlan_filtering prepare phase to driversVladimir Oltean2020-10-052-9/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A driver may refuse to enable VLAN filtering for any reason beyond what the DSA framework cares about, such as: - having tc-flower rules that rely on the switch being VLAN-aware - the particular switch does not support VLAN, even if the driver does (the DSA framework just checks for the presence of the .port_vlan_add and .port_vlan_del pointers) - simply not supporting this configuration to be toggled at runtime Currently, when a driver rejects a configuration it cannot support, it does this from the commit phase, which triggers various warnings in switchdev. So propagate the prepare phase to drivers, to give them the ability to refuse invalid configurations cleanly and avoid the warnings. Since we need to modify all function prototypes and check for the prepare phase from within the drivers, take that opportunity and move the existing driver restrictions within the prepare phase where that is possible and easy. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Landen Chao <Landen.Chao@mediatek.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Jonathan McDowell <noodles@earth.li> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Add devlink port regions support to DSAAndrew Lunn2020-10-041-0/+14
| | | | | | | | | | | Allow DSA drivers to make use of devlink port regions, via simple wrappers. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Register devlink ports before calling DSA driver setup()Andrew Lunn2020-10-041-53/+72
| | | | | | | | | | | | | | | | | | | DSA drivers want to create regions on devlink ports as well as the devlink device instance, in order to export registers and other tables per port. To keep all this code together in the drivers, have the devlink ports registered early, so the setup() method can setup both device and port devlink regions. v3: Remove dp->setup Move common code out of switch statement. Fix wrong goto Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Make use of devlink port flavour unusedAndrew Lunn2020-10-041-0/+10
| | | | | | | | | | | | If a port is unused, still create a devlink port for it, but set the flavour to unused. This allows us to attach devlink regions to the port, etc. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Utilize __vlan_find_dev_deep_rcu()Florian Fainelli2020-10-021-8/+3
| | | | | | | | | | | | | | | | | | | | | Now that we are guaranteed that dsa_untag_bridge_pvid() is called after eth_type_trans() we can utilize __vlan_find_dev_deep_rcu() which will take care of finding an 802.1Q upper on top of a bridge master. A common use case, prior to 12a1526d067 ("net: dsa: untag the bridge pvid from rx skbs") was to configure a bridge 802.1Q upper like this: ip link add name br0 type bridge vlan_filtering 0 ip link add link br0 name br0.1 type vlan id 1 in order to pop the default_pvid VLAN tag. With this change we restore that behavior while still allowing the DSA receive path to automatically pop the VLAN tag. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Obtain VLAN protocol from skb->protocolFlorian Fainelli2020-10-021-2/+1
| | | | | | | | | | Now that dsa_untag_bridge_pvid() is called after eth_type_trans() we are guaranteed that skb->protocol will be set to a correct value, thus allowing us to avoid calling vlan_eth_hdr(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: b53: Set untag_bridge_pvidFlorian Fainelli2020-10-021-13/+2
| | | | | | | | | | Indicate to the DSA receive path that we need to untage the bridge PVID, this allows us to remove the dsa_untag_bridge_pvid() calls from net/dsa/tag_brcm.c. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Call dsa_untag_bridge_pvid() from dsa_switch_rcv()Florian Fainelli2020-10-021-0/+9
| | | | | | | | | | | | When a DSA switch driver needs to call dsa_untag_bridge_pvid(), it can set dsa_switch::untag_brige_pvid to indicate this is necessary. This is a pre-requisite to making sure that we are always calling dsa_untag_bridge_pvid() after eth_type_trans() has been called. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_rtl4_a: use the generic flow dissector procedureVladimir Oltean2020-09-261-9/+0
| | | | | | | | | | | Remove the .flow_dissect procedure, so the flow dissector will call the generic variant which works for this tagging protocol. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_sja1105: use a custom flow dissector procedureVladimir Oltean2020-09-261-0/+11
| | | | | | | | | | | | The sja1105 is a bit of a special snowflake, in that not all frames are transmitted/received in the same way. L2 link-local frames are received with the source port/switch ID information put in the destination MAC address. For the rest, a tag_8021q header is used. So only the latter frames displace the rest of the headers and need to use the generic flow dissector procedure. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_qca: use the generic flow dissector procedureVladimir Oltean2020-09-261-8/+0
| | | | | | | | | | Remove the .flow_dissect procedure, so the flow dissector will call the generic variant which works for this tagging protocol. Cc: John Crispin <john@phrozen.org> Cc: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_mtk: use the generic flow dissector procedureVladimir Oltean2020-09-261-8/+0
| | | | | | | | | | | Remove the .flow_dissect procedure, so the flow dissector will call the generic variant which works for this tagging protocol. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: John Crispin <john@phrozen.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_edsa: use the generic flow dissector procedureVladimir Oltean2020-09-261-8/+0
| | | | | | | | | | Remove the .flow_dissect procedure, so the flow dissector will call the generic variant which works for this tagging protocol. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_dsa: use the generic flow dissector procedureVladimir Oltean2020-09-261-8/+0
| | | | | | | | | | Remove the .flow_dissect procedure, so the flow dissector will call the generic variant which works for this tagging protocol. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_brcm: use generic flow dissector procedureVladimir Oltean2020-09-261-22/+12
| | | | | | | | | | | | | | There are 2 Broadcom tags in use, one places the DSA tag before the Ethernet destination MAC address, and the other before the EtherType. Nonetheless, both displace the rest of the headers, so this tagger can use the generic flow dissector procedure which accounts for that. The ASCII art drawing is a good reference though, so keep it but move it somewhere else. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: point out the tail taggersVladimir Oltean2020-09-262-0/+2
| | | | | | | | | | | | | The Marvell 88E6060 uses tag_trailer.c and the KSZ8795, KSZ9477 and KSZ9893 switches also use tail tags. Tell that to the DSA core, since this makes a difference for the flow dissector. Most switches break the parsing of frame headers, but these ones don't, so no flow dissector adjustment needs to be done for them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: make the .flow_dissect tagger callback return voidVladimir Oltean2020-09-266-21/+12
| | | | | | | | | There is no tagger that returns anything other than zero, so just change the return type appropriately. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_ocelot: use a short prefix on both ingress and egressVladimir Oltean2020-09-261-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are 2 goals that we follow: - Reduce the header size - Make the header size equal between RX and TX The issue that required long prefix on RX was the fact that the ocelot DSA tag, being put before Ethernet as it is, would overlap with the area that a DSA master uses for RX filtering (destination MAC address mainly). Now that we can ask DSA to put the master in promiscuous mode, in theory we could remove the prefix altogether and call it a day, but it looks like we can't. Using no prefix on ingress, some packets (such as ICMP) would be received, while others (such as PTP) would not be received. This is because the DSA master we use (enetc) triggers parse errors ("MAC rx frame errors") presumably because it sees Ethernet frames with a bad length. And indeed, when using no prefix, the EtherType (bytes 12-13 of the frame, bits 96-111) falls over the REW_VAL field from the extraction header, aka the PTP timestamp. When turning the short (32-bit) prefix on, the EtherType overlaps with bits 64-79 of the extraction header, which are a reserved area transmitted as zero by the switch. The packets are not dropped by the DSA master with a short prefix. Actually, the frames look like this in tcpdump (below is a PTP frame, with an extra dsa_8021q tag - dadb 0482 - added by a downstream sja1105). 89:0c:a9:f2:01:00 > 88:80:00:0a:00:1d, 802.3, length 0: LLC, \ dsap Unknown (0x10) Individual, ssap ProWay NM (0x0e) Response, \ ctrl 0x0004: Information, send seq 2, rcv seq 0, \ Flags [Response], length 78 0x0000: 8880 000a 001d 890c a9f2 0100 0000 100f ................ 0x0010: 0400 0000 0180 c200 000e 001f 7b63 0248 ............{c.H 0x0020: dadb 0482 88f7 1202 0036 0000 0000 0000 .........6...... 0x0030: 0000 0000 0000 0000 0000 001f 7bff fe63 ............{..c 0x0040: 0248 0001 1f81 0500 0000 0000 0000 0000 .H.............. 0x0050: 0000 0000 0000 0000 0000 0000 ............ So the short prefix is our new default: we've shortened our RX frames by 12 octets, increased TX by 4, and headers are now equal between RX and TX. Note that we still need promiscuous mode for the DSA master to not drop it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_sja1105: request promiscuous mode for masterVladimir Oltean2020-09-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently PTP is broken when ports are in standalone mode (the tagger keeps printing this message): sja1105 spi0.1: Expected meta frame, is 01-80-c2-00-00-0e in the DSA master multicast filter? Sure, one might say "simply add 01-80-c2-00-00-0e to the master's RX filter" but things become more complicated because: - Actually all frames in the 01-80-c2-xx-xx-xx and 01-1b-19-xx-xx-xx range are trapped to the CPU automatically - The switch mangles bytes 3 and 4 of the MAC address via the incl_srcpt ("include source port [in the DMAC]") option, which is how source port and switch id identification is done for link-local traffic on RX. But this means that an address installed to the RX filter would, at the end of the day, not correspond to the final address seen by the DSA master. Assume RX filtering lists on DSA masters are typically too small to include all necessary addresses for PTP to work properly on sja1105, and just request promiscuous mode unconditionally. Just an example: Assuming the following addresses are trapped to the CPU: 01-80-c2-00-00-00 to 01-80-c2-00-00-ff 01-1b-19-00-00-00 to 01-1b-19-00-00-ff These are 512 addresses. Now let's say this is a board with 3 switches, and 4 ports per switch. The 512 addresses become 6144 addresses that must be managed by the DSA master's RX filtering lists. This may be refined in the future, but for now, it is simply not worth it to add the additional addresses to the master's RX filter, so simply request it to become promiscuous as soon as the driver probes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: allow drivers to request promiscuous mode on masterVladimir Oltean2020-09-261-1/+19
| | | | | | | | | | | | | | | | | | | Currently DSA assumes that taggers don't mess with the destination MAC address of the frames on RX. That is not always the case. Some DSA headers are placed before the Ethernet header (ocelot), and others simply mangle random bytes from the destination MAC address (sja1105 with its incl_srcpt option). Currently the DSA master goes to promiscuous mode automatically when the slave devices go too (such as when enslaved to a bridge), but in standalone mode this is a problem that needs to be dealt with. So give drivers the possibility to signal that their tagging protocol will get randomly dropped otherwise, and let DSA deal with fixing that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mscc: ocelot: always pass skb clone to ocelot_port_add_txtstamp_skbVladimir Oltean2020-09-251-3/+3
| | | | | | | | | | | | | | | | Currently, ocelot switchdev passes the skb directly to the function that enqueues it to the list of skb's awaiting a TX timestamp. Whereas the felix DSA driver first clones the skb, then passes the clone to this queue. This matters because in the case of felix, the common IRQ handler, which is ocelot_get_txtstamp(), currently clones the clone, and frees the original clone. This is useless and can be simplified by using skb_complete_tx_timestamp() instead of skb_tstamp_tx(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: b53: Configure VLANs while not filteringFlorian Fainelli2020-09-241-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | Update the B53 driver to support VLANs while not filtering. This requires us to enable VLAN globally within the switch upon driver initial configuration (dev->vlan_enabled). We also need to remove the code that dealt with PVID re-configuration in b53_vlan_filtering() since that function worked under the assumption that it would only be called to make a bridge VLAN filtering, or not filtering, and we would attempt to move the port's PVID accordingly. Now that VLANs are programmed all the time, even in the case of a non-VLAN filtering bridge, we would be programming a default_pvid for the bridged switch ports. We need the DSA receive path to pop the VLAN tag if it is the bridge's default_pvid because the CPU port is always programmed tagged in the programmed VLANs. In order to do so we utilize the dsa_untag_bridge_pvid() helper introduced in the commit before within net/dsa/tag_brcm.c. Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: untag the bridge pvid from rx skbsVladimir Oltean2020-09-241-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the bridge untags VLANs present in its VLAN groups in __allowed_ingress() only when VLAN filtering is enabled. But when a skb is seen on the RX path as tagged with the bridge's pvid, and that bridge has vlan_filtering=0, and there isn't any 8021q upper with that VLAN either, then we have a problem. The bridge will not untag it (since it is supposed to remain VLAN-unaware), and pvid-tagged communication will be broken. There are 2 situations where we can end up like that: 1. When installing a pvid in egress-tagged mode, like this: ip link add dev br0 type bridge vlan_filtering 0 ip link set swp0 master br0 bridge vlan del dev swp0 vid 1 bridge vlan add dev swp0 vid 1 pvid This happens because DSA configures the VLAN membership of the CPU port using the same flags as swp0 (in this case "pvid and not untagged"), in an attempt to copy the frame as-is from ingress to the CPU. However, in this case, the packet may arrive untagged on ingress, it will be pvid-tagged by the ingress port, and will be sent as egress-tagged towards the CPU. Otherwise stated, the CPU will see a VLAN tag where there was none to speak of on ingress. When vlan_filtering is 1, this is not a problem, as stated in the first paragraph, because __allowed_ingress() will pop it. But currently, when vlan_filtering is 0 and we have such a VLAN configuration, we need an 8021q upper (br0.1) to be able to ping over that VLAN, which is not symmetrical with the vlan_filtering=1 case, and therefore, confusing for users. Basically what DSA attempts to do is simply an approximation: try to copy the skb with (or without) the same VLAN all the way up to the CPU. But DSA drivers treat CPU port VLAN membership in various ways (which is a good segue into situation 2). And some of those drivers simply tell the CPU port to copy the frame unmodified, which is the golden standard when it comes to VLAN processing (therefore, any driver which can configure the hardware to do that, should do that, and discard the VLAN flags requested by DSA on the CPU port). 2. Some DSA drivers always configure the CPU port as egress-tagged, in an attempt to recover the classified VLAN from the skb. These drivers cannot work at all with untagged traffic when bridged in vlan_filtering=0 mode. And they can't go for the easy "just keep the pvid as egress-untagged towards the CPU" route, because each front port can have its own pvid, and that might require conflicting VLAN membership settings on the CPU port (swp1 is pvid for VID 1 and egress-tagged for VID 2; swp2 is egress-taggeed for VID 1 and pvid for VID 2; with this simplistic approach, the CPU port, which is really a separate hardware entity and has its own VLAN membership settings, would end up being egress-untagged in both VID 1 and VID 2, therefore losing the VLAN tags of ingress traffic). So the only thing we can do is to create a helper function for resolving the problematic case (that is, a function which untags the bridge pvid when that is in vlan_filtering=0 mode), which taggers in need should call. It isn't called from the generic DSA receive path because there are drivers that fall neither in the first nor second category. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2020-09-232-6/+23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mscc: ocelot: add locking for the port TX timestamp IDVladimir Oltean2020-09-181-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ocelot_port->ts_id is used to: (a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ with an skb. (b) populate the REW_OP from the injection header of the ongoing skb. Only then is ocelot_port->ts_id incremented. This is a problem because, at least theoretically, another timestampable skb might use the same ocelot_port->ts_id before that is incremented. Normally all transmit calls are serialized by the netdev transmit spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also called by DSA, which has started declaring the NETIF_F_LLTX feature since commit 2b86cb829976 ("net: dsa: declare lockless TX feature for slave ports"). So the logic of using and incrementing the timestamp id should be atomic per port. The solution is to use the global ocelot_port->ts_id only while protected by the associated ocelot_port->ts_id_lock. That's where we populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb is called for the actual skb, but for felix, it is called for the skb's clone. That is something which will also be changed in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: link interfaces with the DSA master to get rid of lockdep warningsVladimir Oltean2020-09-091-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 845e0ebb4408 ("net: change addr_list_lock back to static key"), cascaded DSA setups (DSA switch port as DSA master for another DSA switch port) are emitting this lockdep warning: ============================================ WARNING: possible recursive locking detected 5.8.0-rc1-00133-g923e4b5032dd-dirty #208 Not tainted -------------------------------------------- dhcpcd/323 is trying to acquire lock: ffff000066dd4268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 but task is already holding lock: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dsa_master_addr_list_lock_key/1); lock(&dsa_master_addr_list_lock_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by dhcpcd/323: #0: ffffdbd1381dda18 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff00006614b268 (_xmit_ETHER){+...}-{2:2}, at: dev_set_rx_mode+0x28/0x48 #2: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 stack backtrace: Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x20/0x30 dump_stack+0xec/0x158 __lock_acquire+0xca0/0x2398 lock_acquire+0xe8/0x440 _raw_spin_lock_nested+0x64/0x90 dev_mc_sync+0x44/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_mc_sync+0x84/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_set_rx_mode+0x30/0x48 __dev_open+0x10c/0x180 __dev_change_flags+0x170/0x1c8 dev_change_flags+0x2c/0x70 devinet_ioctl+0x774/0x878 inet_ioctl+0x348/0x3b0 sock_do_ioctl+0x50/0x310 sock_ioctl+0x1f8/0x580 ksys_ioctl+0xb0/0xf0 __arm64_sys_ioctl+0x28/0x38 el0_svc_common.constprop.0+0x7c/0x180 do_el0_svc+0x2c/0x98 el0_sync_handler+0x9c/0x1b8 el0_sync+0x158/0x180 Since DSA never made use of the netdev API for describing links between upper devices and lower devices, the dev->lower_level value of a DSA switch interface would be 1, which would warn when it is a DSA master. We can use netdev_upper_dev_link() to describe the relationship between a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port) is an "upper" to a DSA "master" (host port). The relationship is "many uppers to one lower", like in the case of VLAN. So, for that reason, we use the same function as VLAN uses. There might be a chance that somebody will try to take hold of this interface and use it immediately after register_netdev() and before netdev_upper_dev_link(). To avoid that, we do the registration and linkage while holding the RTNL, and we use the RTNL-locked cousin of register_netdev(), which is register_netdevice(). Since this warning was not there when lockdep was using dynamic keys for addr_list_lock, we are blaming the lockdep patch itself. The network stack _has_ been using static lockdep keys before, and it _is_ likely that stacked DSA setups have been triggering these lockdep warnings since forever, however I can't test very old kernels on this particular stacked DSA setup, to ensure I'm not in fact introducing regressions. Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key") Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: tag_sja1105: add compatibility with hwaccel VLAN tagsVladimir Oltean2020-09-211-4/+17
| | | | | | | | | | | | | | | | | | Check whether there is any hwaccel VLAN tag on RX, and if there is, treat it as the tag_8021q header. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: tag_8021q: add VLANs to the master interface tooVladimir Oltean2020-09-211-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The whole purpose of tag_8021q is to send VLAN-tagged traffic to the CPU, from which the driver can decode the source port and switch id. Currently this only works if the VLAN filtering on the master is disabled. Change that by explicitly adding code to tag_8021q.c to add the VLANs corresponding to the tags to the filter of the master interface. Because we now need to call vlan_vid_add, then we also need to hold the RTNL mutex. Propagate that requirement to the callers of dsa_8021q_setup and modify the existing call sites as appropriate. Note that one call path, sja1105_best_effort_vlan_filtering_set -> sja1105_vlan_filtering -> sja1105_setup_8021q_tagging, was already holding this lock. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: install VLANs into the master's RX filter tooVladimir Oltean2020-09-211-4/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most DSA switch tags shift the EtherType to the right, causing the master to not parse the VLAN as VLAN. However, not all switches do that (example: tail tags, tag_8021q etc), and if the DSA master has "rx-vlan-filter: on" in ethtool -k, then we have a problem. Therefore, we could populate the VLAN table of the master, just in case (for some switches it will not make a difference), so that network I/O can work even with a VLAN filtering master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: allow 8021q uppers while the bridge has vlan_filtering=0Vladimir Oltean2020-09-212-4/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the bridge has VLAN awareness disabled there isn't any duplication of functionality, since the bridge does not process VLAN. Don't deny adding 8021q uppers to DSA switch ports in that case. The switch is supposed to simply pass traffic leaving the VLAN tag as-is, and the stack will happily strip the VLAN tag for all 8021q uppers that exist. We need to ensure that there are no 8021q uppers when the user attempts to enable bridge vlan_filtering. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: refuse configuration in prepare phase of dsa_port_vlan_filtering()Vladimir Oltean2020-09-211-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current logic beats me a little bit. The comment that "bridge skips -EOPNOTSUPP, so skip the prepare phase" was introduced in commit fb2dabad69f0 ("net: dsa: support VLAN filtering switchdev attr"). I'm not sure: (a) ok, the bridge skips -EOPNOTSUPP, but, so what, where are we returning -EOPNOTSUPP? (b) even if we are, and I'm just not seeing it, what is the causality relationship between the bridge skipping -EOPNOTSUPP and DSA skipping the prepare phase, and just returning zero? One thing is certain beyond doubt though, and that is that DSA currently refuses VLAN filtering from the "commit" phase instead of "prepare", and that this is not a good thing: ip link add br0 type bridge ip link add br1 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br1 [ 3790.379389] 001: sja1105 spi0.1: VLAN filtering is a global setting [ 3790.379399] 001: ------------[ cut here ]------------ [ 3790.379403] 001: WARNING: CPU: 1 PID: 515 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4 [ 3790.379420] 001: swp3: Commit of attribute (id=6) failed. [ 3790.379533] 001: [<c11ff588>] (switchdev_port_attr_set_now) from [<c11b62e4>] (nbp_vlan_init+0x84/0x148) [ 3790.379544] 001: [<c11b62e4>] (nbp_vlan_init) from [<c11a2ff0>] (br_add_if+0x514/0x670) [ 3790.379554] 001: [<c11a2ff0>] (br_add_if) from [<c1031b5c>] (do_setlink+0x38c/0xab0) [ 3790.379565] 001: [<c1031b5c>] (do_setlink) from [<c1036fe8>] (__rtnl_newlink+0x44c/0x748) [ 3790.379573] 001: [<c1036fe8>] (__rtnl_newlink) from [<c1037328>] (rtnl_newlink+0x44/0x60) [ 3790.379580] 001: [<c1037328>] (rtnl_newlink) from [<c10315fc>] (rtnetlink_rcv_msg+0x124/0x2f8) [ 3790.379590] 001: [<c10315fc>] (rtnetlink_rcv_msg) from [<c10926b8>] (netlink_rcv_skb+0xb8/0x110) [ 3790.379806] 001: ---[ end trace 0000000000000002 ]--- [ 3790.379819] 001: sja1105 spi0.1 swp3: failed to initialize vlan filtering on this port So move the current logic that may fail (except ds->ops->port_vlan_filtering, that is way harder) into the prepare stage of the switchdev transaction. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: convert denying bridge VLAN with existing 8021q upper to ↵Vladimir Oltean2020-09-212-41/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: convert check for 802.1Q upper when bridged into PRECHANGEUPPERVladimir Oltean2020-09-211-36/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DSA tries to prevent having a VLAN added by a bridge and by an 802.1Q upper at the same time. It does that by checking the VID in .ndo_vlan_rx_add_vid(), since that's something that the 8021q module calls, via vlan_vid_add(). When a VLAN matches in both subsystems, this check returns -EBUSY. However the vlan_vid_add() function isn't specific to the 8021q module in any way at all. It is simply the kernel's way to tell an interface to add a VLAN to its RX filter and not drop that VLAN. So there's no reason to return -EBUSY when somebody tries to call vlan_vid_add() for a VLAN that was installed by the bridge. The proper behavior is to accept that configuration. So what's wrong is how DSA checks that it has an 8021q upper. It should look at the actual uppers for that, not just assume that the 8021q module was somewhere in the call stack of .ndo_vlan_rx_add_vid(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: rename dsa_slave_upper_vlan_check to something more suggestiveVladimir Oltean2020-09-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We'll be adding a new check in the PRECHANGEUPPER notifier, where we'll need to check some VLAN uppers. It is hard to do that when there is already a function named dsa_slave_upper_vlan_check. So rename this one. Not to mention that this function probably shouldn't have started with "dsa_slave_" in the first place, since the struct net_device argument isn't a DSA slave, but an 8021q upper of one. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: deny enslaving 802.1Q upper to VLAN-aware bridge from PRECHANGEUPPERVladimir Oltean2020-09-211-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There doesn't seem to be any strong technical reason for doing it this way, but we'll be adding more checks for invalid upper device configurations, and it will be easier to have them all grouped under PRECHANGEUPPER. Tested that it still works: ip link set br0 type bridge vlan_filtering 1 ip link add link swp2 name swp2.100 type vlan id 100 ip link set swp2.100 master br0 [ 20.321312] br0: port 5(swp2.100) entered blocking state [ 20.326711] br0: port 5(swp2.100) entered disabled state Error: dsa_core: Cannot enslave VLAN device into VLAN aware bridge. [ 20.346549] br0: port 5(swp2.100) entered blocking state [ 20.351957] br0: port 5(swp2.100) entered disabled state Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: wire up devlink info getAndrew Lunn2020-09-191-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | Allow the DSA drivers to implement the devlink call to get info info, e.g. driver name, firmware version, ASIC ID, etc. v2: Combine declaration and the assignment on a single line. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: Add devlink regions support to DSAAndrew Lunn2020-09-191-0/+16
| | | | | | | | | | | | | | | | Allow DSA drivers to make use of devlink regions, via simple wrappers. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: Add helper to convert from devlink to dsAndrew Lunn2020-09-191-10/+2
| | | | | | | | | | | | | | | | Given a devlink instance, return the dsa switch it is associated to. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Revert "net: dsa: Add more convenient functions for installing port VLANs"Vladimir Oltean2020-09-123-38/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 314f76d7a68bab0516aa52877944e6aacfa0fc3f. Citing that commit message, the call graph was: dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Now that tag_8021q has its own ops structure, it no longer relies on dsa_port_vid_add, and therefore on the dsa_switch_ops to install its VLANs. So dsa_port_vid_add now only has one single caller. So we can simplify the call graph to what it was before, aka: dsa_slave_vlan_rx_add_vid dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: tag_8021q: add a context structureVladimir Oltean2020-09-121-64/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While working on another tag_8021q driver implementation, some things became apparent: - It is not mandatory for a DSA driver to offload the tag_8021q VLANs by using the VLAN table per se. For example, it can add custom TCAM rules that simply encapsulate RX traffic, and redirect & decapsulate rules for TX traffic. For such a driver, it makes no sense to receive the tag_8021q configuration through the same callback as it receives the VLAN configuration from the bridge and the 8021q modules. - Currently, sja1105 (the only tag_8021q user) sets a priv->expect_dsa_8021q variable to distinguish between the bridge calling, and tag_8021q calling. That can be improved, to say the least. - The crosschip bridging operations are, in fact, stateful already. The list of crosschip_links must be kept by the caller and passed to the relevant tag_8021q functions. So it would be nice if the tag_8021q configuration was more self-contained. This patch attempts to do that. Create a struct dsa_8021q_context which encapsulates a struct dsa_switch, and has 2 function pointers for adding and deleting a VLAN. These will replace the previous channel to the driver, which was through the .port_vlan_add and .port_vlan_del callbacks of dsa_switch_ops. Also put the list of crosschip_links into this dsa_8021q_context. Drivers that don't support cross-chip bridging can simply omit to initialize this list, as long as they dont call any cross-chip function. The sja1105_vlan_add and sja1105_vlan_del functions are refactored into a smaller sja1105_vlan_add_one, which now has 2 entry points: - sja1105_vlan_add, from struct dsa_switch_ops - sja1105_dsa_8021q_vlan_add, from the tag_8021q ops But even this change is fairly trivial. It just reflects the fact that for sja1105, the VLANs from these 2 channels end up in the same hardware table. However that is not necessarily true in the general sense (and that's the reason for making this change). The rest of the patch is mostly plain refactoring of "ds" -> "ctx". The dsa_8021q_context structure needs to be propagated because adding a VLAN is now done through the ops function pointers inside of it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: tag_8021q: setup tagging via a single function callVladimir Oltean2020-09-121-2/+19
| | | | | | | | | | | | | | | | | | | | | | There is no point in calling dsa_port_setup_8021q_tagging for each individual port. Additionally, it will become more difficult to do that when we'll have a context structure to tag_8021q (next patch). So refactor this now. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: don't print non-fatal MTU error if not supportedVladimir Oltean2020-09-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 72579e14a1d3 ("net: dsa: don't fail to probe if we couldn't set the MTU") changed, for some reason, the "err && err != -EOPNOTSUPP" check into a simple "err". This causes the MTU warning to be printed even for drivers that don't have the MTU operations implemented. Fix that. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: dsa: change PHY error message againVladimir Oltean2020-09-081-2/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | slave_dev->name is only populated at this stage if it was specified through a label in the device tree. However that is not mandatory. When it isn't, the error message looks like this: [ 5.037057] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d [ 5.044672] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d [ 5.052275] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d [ 5.059877] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d which is especially confusing since the error gets printed on behalf of the DSA master (fsl_enetc in this case). Printing an error message that contains a valid reference to the DSA port's name is difficult at this point in the initialization stage, so at least we should print some info that is more reliable, even if less user-friendly. That may be the driver name and the hardware port index. After this change, the error is printed as: [ 6.051587] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 0 [ 6.061192] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 1 [ 6.070765] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 2 [ 6.080324] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 3 Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-08-241-1/+1
| | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
* net: dsa: stop overriding master's ndo_get_phys_port_nameVladimir Oltean2020-07-241-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The purpose of this override is to give the user an indication of what the number of the CPU port is (in DSA, the CPU port is a hardware implementation detail and not a network interface capable of traffic). However, it has always failed (by design) at providing this information to the user in a reliable fashion. Prior to commit 3369afba1e46 ("net: Call into DSA netdevice_ops wrappers"), the behavior was to only override this callback if it was not provided by the DSA master. That was its first failure: if the DSA master itself was a DSA port or a switchdev, then the user would not see the number of the CPU port in /sys/class/net/eth0/phys_port_name, but the number of the DSA master port within its respective physical switch. But that was actually ok in a way. The commit mentioned above changed that behavior, and now overrides the master's ndo_get_phys_port_name unconditionally. That comes with problems of its own, which are worse in a way. The idea is that it's typical for switchdev users to have udev rules for consistent interface naming. These are based, among other things, on the phys_port_name attribute. If we let the DSA switch at the bottom to start randomly overriding ndo_get_phys_port_name with its own CPU port, we basically lose any predictability in interface naming, or even uniqueness, for that matter. So, there are reasons to let DSA override the master's callback (to provide a consistent interface, a number which has a clear meaning and must not be interpreted according to context), and there are reasons to not let DSA override it (it breaks udev matching for the DSA master). But, there is an alternative method for users to retrieve the number of the CPU port of each DSA switch in the system: $ devlink port pci/0000:00:00.5/0: type eth netdev swp0 flavour physical port 0 pci/0000:00:00.5/2: type eth netdev swp2 flavour physical port 2 pci/0000:00:00.5/4: type notset flavour cpu port 4 spi/spi2.0/0: type eth netdev sw0p0 flavour physical port 0 spi/spi2.0/1: type eth netdev sw0p1 flavour physical port 1 spi/spi2.0/2: type eth netdev sw0p2 flavour physical port 2 spi/spi2.0/4: type notset flavour cpu port 4 spi/spi2.1/0: type eth netdev sw1p0 flavour physical port 0 spi/spi2.1/1: type eth netdev sw1p1 flavour physical port 1 spi/spi2.1/2: type eth netdev sw1p2 flavour physical port 2 spi/spi2.1/3: type eth netdev sw1p3 flavour physical port 3 spi/spi2.1/4: type notset flavour cpu port 4 So remove this duplicated, unreliable and troublesome method. From this patch on, the phys_port_name attribute of the DSA master will only contain information about itself (if at all). If the users need reliable information about the CPU port they're probably using devlink anyway. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: of: Allow ethernet-ports as encapsulating nodeKurt Kanzenbach2020-07-231-2/+6
| | | | | | | | Due to unified Ethernet Switch Device Tree Bindings allow for ethernet-ports as encapsulating node as well. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: use the ETH_MIN_MTU and ETH_DATA_LEN default valuesVladimir Oltean2020-07-211-3/+0
| | | | | | | | | | | | | | Now that DSA supports MTU configuration, undo the effects of commit 8b1efc0f83f1 ("net: remove MTU limits on a few ether_setup callers") and let DSA interfaces use the default min_mtu and max_mtu specified by ether_setup(). This is more important for min_mtu: since DSA is Ethernet, the minimum MTU is the same as of any other Ethernet interface, and definitely not zero. For the max_mtu, we have a callback through which drivers can override that, if they want to. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 13:50:12 +0100