summaryrefslogtreecommitdiffstats
path: root/net/ethtool/common.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* netdev: support binding dma-buf to netdeviceMina Almasry2024-09-121-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a netdev_dmabuf_binding struct which represents the dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to rx queues on the netdevice. On the binding, the dma_buf_attach & dma_buf_map_attachment will occur. The entries in the sg_table from mapping will be inserted into a genpool to make it ready for allocation. The chunks in the genpool are owned by a dmabuf_chunk_owner struct which holds the dma-buf offset of the base of the chunk and the dma_addr of the chunk. Both are needed to use allocations that come from this chunk. We create a new type that represents an allocation from the genpool: net_iov. We setup the net_iov allocation size in the genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally allocated by the page pool and given to the drivers. The user can unbind the dmabuf from the netdevice by closing the netlink socket that established the binding. We do this so that the binding is automatically unbound even if the userspace process crashes. The binding and unbinding leaves an indicator in struct netdev_rx_queue that the given queue is bound, and the binding is actuated by resetting the rx queue using the queue API. The netdev_dmabuf_binding struct is refcounted, and releases its resources only when all the refs are released. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net-timestamp: introduce SOF_TIMESTAMPING_OPT_RX_FILTER flagJason Xing2024-09-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | introduce a new flag SOF_TIMESTAMPING_OPT_RX_FILTER in the receive path. User can set it with SOF_TIMESTAMPING_SOFTWARE to filter out rx software timestamp report, especially after a process turns on netstamp_needed_key which can time stamp every incoming skb. Previously, we found out if an application starts first which turns on netstamp_needed_key, then another one only passing SOF_TIMESTAMPING_SOFTWARE could also get rx timestamp. Now we handle this case by introducing this new flag without breaking users. Quoting Willem to explain why we need the flag: "why a process would want to request software timestamp reporting, but not receive software timestamp generation. The only use I see is when the application does request SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_SOFTWARE." Similarly, this new flag could also be used for hardware case where we can set it with SOF_TIMESTAMPING_RAW_HARDWARE, then we won't receive hardware receive timestamp. Another thing about errqueue in this patch I have a few words to say: In this case, we need to handle the egress path carefully, or else reporting the tx timestamp will fail. Egress path and ingress path will finally call sock_recv_timestamp(). We have to distinguish them. Errqueue is a good indicator to reflect the flow direction. Suggested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240909015612.3856-2-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ethtool: RX software timestamp for allGal Pressman2024-09-041-7/+8
| | | | | | | | | | | | | | | | | | | All devices support SOF_TIMESTAMPING_RX_SOFTWARE by virtue of net_timestamp_check() being called in the device independent code. Move the responsibility of reporting SOF_TIMESTAMPING_RX_SOFTWARE and SOF_TIMESTAMPING_SOFTWARE, and setting PHC index to -1 to the core. Device drivers no longer need to use them. Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Link: https://lore.kernel.org/netdev/661550e348224_23a2b2294f7@willemb.c.googlers.com.notmuch/ Co-developed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240901112803.212753-2-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* netdev_features: convert NETIF_F_FCOE_MTU to dev->fcoe_mtuAlexander Lobakin2024-09-031-1/+0
| | | | | | | | | | | Ability to handle maximum FCoE frames of 2158 bytes can never be changed and thus more of an attribute, not a toggleable feature. Move it from netdev_features_t to "cold" priv flags (bitfield bool) and free yet another feature bit. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* netdev_features: convert NETIF_F_NETNS_LOCAL to dev->netns_localAlexander Lobakin2024-09-031-1/+0
| | | | | | | | | | | "Interface can't change network namespaces" is rather an attribute, not a feature, and it can't be changed via Ethtool. Make it a "cold" private flag instead of a netdev_feature and free one more bit. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* netdev_features: convert NETIF_F_LLTX to dev->lltxAlexander Lobakin2024-09-031-1/+0
| | | | | | | | | | NETIF_F_LLTX can't be changed via Ethtool and is not a feature, rather an attribute, very similar to IFF_NO_QUEUE (and hot). Free one netdev_features_t bit and make it a "hot" private flag. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* ethtool: refactor checking max channelsMina Almasry2024-08-101-2/+30
| | | | | | | | | | | | | | | | | | | | | | | Currently ethtool_set_channel calls separate functions to check whether the new channel number violates rss configuration or flow steering configuration. Very soon we need to check whether the new channel number violates memory provider configuration as well. To do all 3 checks cleanly, add a wrapper around ethtool_get_max_rxnfc_channel() and ethtool_get_max_rxfh_channel(), which does both checks. We can later extend this wrapper to add the memory provider check in one place. Note that in the current code, we put a descriptive genl error message when we run into issues. To preserve the error message, we pass the genl_info* to the common helper. The ioctl calls can pass NULL instead. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20240808205345.2141858-1-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ethtool: check rxfh_max_num_contexts != 1 at register timeEdward Cree2024-08-091-0/+2
| | | | | | | | | | | | A value of 1 doesn't make sense, as it implies the only allowed context ID is 0, which is reserved for the default context - in which case the driver should just not claim to support custom RSS contexts at all. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/c07725b3a3d0b0a63b85e230f9c77af59d4d07f8.1723045898.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge branch 'net-make-timestamping-selectable'Jakub Kicinski2024-07-151-4/+4
|\ | | | | | | | | | | | | | | First part of "net: Make timestamping selectable" from Kory Maincent. Change the driver-facing type already to lower rebasing pain. Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: Add struct kernel_ethtool_ts_infoKory Maincent2024-07-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: Change the API of PHY default timestamp to MACKory Maincent2024-07-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the API to select MAC default time stamping instead of the PHY. Indeed the PHY is closer to the wire therefore theoretically it has less delay than the MAC timestamping but the reality is different. Due to lower time stamping clock frequency, latency in the MDIO bus and no PHC hardware synchronization between different PHY, the PHY PTP is often less precise than the MAC. The exception is for PHY designed specially for PTP case but these devices are not very widespread. For not breaking the compatibility default_timestamp flag has been introduced in phy_device that is set by the phy driver to know we are using the old API behavior. Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-4-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: bcm54811: New link mode for BroadR-ReachKamil Horák (2N)2024-07-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a new link mode necessary for 10 MBit single-pair connection in BroadR-Reach mode on bcm5481x PHY by Broadcom. This new link mode, 10baseT1BRR, is known as 1BR10 in the Broadcom terminology. Another link mode to be used is 1BR100 and it is already present as 100baseT1, because Broadcom's 1BR100 became 100baseT1 (IEEE 802.3bw). Signed-off-by: Kamil Horák (2N) <kamilh@axis.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240712150709.3134474-2-kamilh@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: ethtool: let drivers remove lost RSS contextsJakub Kicinski2024-07-131-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RSS contexts may get lost from a device, in various extreme circumstances. Specifically if the firmware leaks resources and resets, or crashes and either recovers in partially working state or the crash causes a different FW version to run - creating the context again may fail. Drivers should do their absolute best to prevent this from happening. When it does, however, telling user that a context exists, when it can't possibly be used any more is counter productive. Add a helper for drivers to discard contexts. Print an error, in the future netlink notification will also be sent. More robust approaches were proposed, like keeping the contexts but marking them as "dead" (but possibly resurrected by next reset). That may be better but it's unclear at this stage whether the effort is worth the benefits. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://patch.msgid.link/20240711220713.283778-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ethtool: use the rss context XArray in ring deactivation safety-checkJakub Kicinski2024-07-111-4/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ethtool_get_max_rxfh_channel() gets called when user requests deactivating Rx channels. Check the additional RSS contexts, too. While we do track whether RSS context has an indirection table explicitly set by the user, no driver looks at that bit. Assume drivers won't auto-regenerate the additional tables, to be safe. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240710174043.754664-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ethtool: fail closed if we can't get max channel used in indirection tablesJakub Kicinski2024-07-111-11/+15
|/ | | | | | | | | | | | | | | Commit 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with active RSS contexts") proves that allowing indirection table to contain channels with out of bounds IDs may lead to crashes. Currently the max channel check in the core gets skipped if driver can't fetch the indirection table or when we can't allocate memory. Both of those conditions should be extremely rare but if they do happen we should try to be safe and fail the channel change. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240710174043.754664-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki2023-12-141-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: partial revert of the "Make timestamping selectable: seriesJakub Kicinski2023-11-191-17/+2
| | | | | | | | | | | | | | | | | | | | Revert following commits: commit acec05fb78ab ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask") commit 11d55be06df0 ("net: ethtool: Add a command to expose current time stamping layer") commit bb8645b00ced ("netlink: specs: Introduce new netlink command to get current timestamp") commit d905f9c75329 ("net: ethtool: Add a command to list available time stamping layers") commit aed5004ee7a0 ("netlink: specs: Introduce new netlink command to list available time stamping layers") commit 51bdf3165f01 ("net: Replace hwtstamp_source by timestamping layer") commit 0f7f463d4821 ("net: Change the API of PHY default timestamp to MAC") commit 091fab122869 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp") commit 152c75e1d002 ("net: ethtool: ts: Let the active time stamping layer be selectable") commit ee60ea6be0d3 ("netlink: specs: Introduce time stamping set command") They need more time for reviews. Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: Change the API of PHY default timestamp to MACKory Maincent2023-11-181-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | Change the API to select MAC default time stamping instead of the PHY. Indeed the PHY is closer to the wire therefore theoretically it has less delay than the MAC timestamping but the reality is different. Due to lower time stamping clock frequency, latency in the MDIO bus and no PHC hardware synchronization between different PHY, the PHY PTP is often less precise than the MAC. The exception is for PHY designed specially for PTP case but these devices are not very widespread. For not breaking the compatibility I introduce a default_timestamp flag in phy_device that is set by the phy driver to know we are using the old API behavior. The phy_set_timestamp function is called at each call of phy_attach_direct. In case of MAC driver using phylink this function is called when the interface is turned up. Then if the interface goes down and up again the last choice of timestamp will be overwritten by the default choice. A solution could be to cache the timestamp status but it can bring other issues. In case of SFP, if we change the module, it doesn't make sense to blindly re-set the timestamp back to PHY, if the new module has a PHY with mediocre timestamping capabilities. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethtool: Refactor identical get_ts_info implementations.Richard Cochran2023-11-181-0/+6
| | | | | | | | | | | | The vlan, macvlan and the bonding drivers call their "real" device driver in order to report the time stamping capabilities. Provide a core ethtool helper function to avoid copy/paste in the stack. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: untangle the linkmode and ethtool headersJakub Kicinski2023-10-201-0/+21
| | | | | | | | | | | | | | | | | Commit 26c5334d344d ("ethtool: Add forced speed to supported link modes maps") added a dependency between ethtool.h and linkmode.h. The dependency in the opposite direction already exists so the new code was inserted in an awkward place. The reason for ethtool.h to include linkmode.h, is that ethtool_forced_speed_maps_init() is a static inline helper. That's not really necessary. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: transfer rtnl_lock() requirement from ethtool_set_ethtool_phy_ops() to ↵Vladimir Oltean2023-08-031-2/+1
| | | | | | | | | | | | | | | | | caller phy_init() and phy_exit() will have to do more stuff under rtnl_lock() in a future change. Since rtnl_unlock() -> netdev_run_todo() does a lot of stuff under the hood, it's a pity to lock and unlock the rtnetlink mutex twice in a row. Change the calling convention such that the only caller of ethtool_set_ethtool_phy_ops(), phy_device.c, provides a context where the rtnl_mutex is already acquired. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230801142824.1772134-11-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHYPiergiorgio Beruto2023-01-111-0/+8
| | | | | | | | | | | This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S Ethernet PHY. According to the specifications, the 10BASE-T1S supports Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net_tstamp: add SOF_TIMESTAMPING_OPT_ID_TCPWillem de Bruijn2022-12-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an option to initialize SOF_TIMESTAMPING_OPT_ID for TCP from write_seq sockets instead of snd_una. This should have been the behavior from the start. Because processes may now exist that rely on the established behavior, do not change behavior of the existing option, but add the right behavior with a new flag. It is encouraged to always set SOF_TIMESTAMPING_OPT_ID_TCP on stream sockets along with the existing SOF_TIMESTAMPING_OPT_ID. Intuitively the contract is that the counter is zero after the setsockopt, so that the next write N results in a notification for the last byte N - 1. On idle sockets snd_una == write_seq and this holds for both. But on sockets with data in transmission, snd_una records the unacked offset in the stream. This depends on the ACK response from the peer. A process cannot learn this in a race free manner (ioctl SIOCOUTQ is one racy approach). write_seq records the offset at the last byte written by the process. This is a better starting point. It matches the intuitive contract in all circumstances, unaffected by external behavior. The new timestamp flag necessitates increasing sk_tsflags to 32 bits. Move the field in struct sock to avoid growing the socket (for some common CONFIG variants). The UAPI interface so_timestamping.flags is already int, so 32 bits wide. Reported-by: Sotirios Delimanolis <sotodel@meta.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20221207143701.29861-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ethtool: Fail number of channels change when it conflicts with rxnfcGal Pressman2022-11-081-0/+66
| | | | | | | | | | | | | | | Similar to what we do with the hash indirection table [1], when network flow classification rules are forwarding traffic to channels greater than the requested number of channels, fail the operation. Without this, traffic could be directed to channels which no longer exist (dropped) after changing number of channels. [1] commit d4ab4286276f ("ethtool: correctly ensure {GS}CHANNELS doesn't conflict with GS{RXFH}") Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20221106123127.522985-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* ethtool: Add support for 800Gbps link modesAmit Cohen2022-10-241-0/+14
| | | | | | | | | | | | | | | | | | | | | | | Add support for 800Gbps speed, link modes of 100Gbps per lane. As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df copper and optical PMDs baselines using 100G/lane will be supported. Add the relevant PMDs which are mentioned in slide 5 in IEEE documentation [1] and were approved on 10-2022 [2]: BP - KR8 Cu Cable - CR8 MMF 50m - VR8 MMF 100m - SR8 SMF 500m - DR8 SMF 2km - DR8-2 [1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf [2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdf Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: Add 10base-T1L link mode entryAlexandru Tachici2022-05-011-0/+3
| | | | | | | | | Add entry for the 10base-T1L full duplex mode. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: add support to set/get tx copybreak buf size via ethtoolHao Chen2021-11-221-0/+1
| | | | | | | | Add support for ethtool to set/get tx copybreak buf size. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sock: extend SO_TIMESTAMPING for PHC bindingYangbo Lu2021-07-011-0/+1
| | | | | | | | | | | | | | | | | | | | Since PTP virtual clock support is added, there can be several PTP virtual clocks based on one PTP physical clock for timestamping. This patch is to extend SO_TIMESTAMPING API to support PHC (PTP Hardware Clock) binding by adding a new flag SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are in use, user space can configure to bind one for timestamping, but PTP physical clock is not supported and not needed to bind. This patch is preparation for timestamp conversion from raw timestamp to a specific PTP virtual clock time in core net. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: add a new command for getting PHC virtual clocksYangbo Lu2021-07-011-0/+13
| | | | | | | | | Add an interface for getting PHC (PTP Hardware Clock) virtual clocks, which are based on PHC physical clock providing hardware timestamp to network packets. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: Add lanes parameter for ETHTOOL_LINK_MODE_10000baseR_FEC_BITDanielle Ratson2021-04-071-0/+1
| | | | | | | | | | | | | | Lanes field is missing for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT link mode and it causes a failure when trying to set 'speed 10000 lanes 1' on Spectrum-2 machines when autoneg is set to on. Add the lanes parameter for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT link mode. Fixes: c8907043c6ac9 ("ethtool: Get link mode in use instead of speed and duplex parameters") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: Remove link_mode param and derive link params from driverDanielle Ratson2021-04-071-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some drivers clear the 'ethtool_link_ksettings' struct in their get_link_ksettings() callback, before populating it with actual values. Such drivers will set the new 'link_mode' field to zero, resulting in user space receiving wrong link mode information given that zero is a valid value for the field. Another problem is that some drivers (notably tun) can report random values in the 'link_mode' field. This can result in a general protection fault when the field is used as an index to the 'link_mode_params' array [1]. This happens because such drivers implement their set_link_ksettings() callback by simply overwriting their private copy of 'ethtool_link_ksettings' struct with the one they get from the stack, which is not always properly initialized. Fix these problems by removing 'link_mode' from 'ethtool_link_ksettings' and instead have drivers call ethtool_params_from_link_mode() with the current link mode. The function will derive the link parameters (e.g., speed) from the link mode and fill them in the 'ethtool_link_ksettings' struct. v3: * Remove link_mode parameter and derive the link parameters in the driver instead of passing link_mode parameter to ethtool and derive it there. v2: * Introduce 'cap_link_mode_supported' instead of adding a validity field to 'ethtool_link_ksettings' struct. [1] general protection fault, probably for non-canonical address 0xdffffc00f14cc32c: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x000000078a661960-0x000000078a661967] CPU: 0 PID: 8452 Comm: syz-executor360 Not tainted 5.11.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__ethtool_get_link_ksettings+0x1a3/0x3a0 net/ethtool/ioctl.c:446 Code: b7 3e fa 83 fd ff 0f 84 30 01 00 00 e8 16 b0 3e fa 48 8d 3c ed 60 d5 69 8a 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 +38 d0 7c 08 84 d2 0f 85 b9 RSP: 0018:ffffc900019df7a0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888026136008 RCX: 0000000000000000 RDX: 00000000f14cc32c RSI: ffffffff873439ca RDI: 000000078a661960 RBP: 00000000ffff8880 R08: 00000000ffffffff R09: ffff88802613606f R10: ffffffff873439bc R11: 0000000000000000 R12: 0000000000000000 R13: ffff88802613606c R14: ffff888011d0c210 R15: ffff888011d0c210 FS: 0000000000749300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b60f0 CR3: 00000000185c2000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: linkinfo_prepare_data+0xfd/0x280 net/ethtool/linkinfo.c:37 ethnl_default_notify+0x1dc/0x630 net/ethtool/netlink.c:586 ethtool_notify+0xbd/0x1f0 net/ethtool/netlink.c:656 ethtool_set_link_ksettings+0x277/0x330 net/ethtool/ioctl.c:620 dev_ethtool+0x2b35/0x45d0 net/ethtool/ioctl.c:2842 dev_ioctl+0x463/0xb70 net/core/dev_ioctl.c:440 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060 sock_ioctl+0x477/0x6a0 net/socket.c:1177 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c8907043c6ac9 ("ethtool: Get link mode in use instead of speed and duplex parameters") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hsr: add offloading supportGeorge McCollister2021-02-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding. For HSR, insertion involves the switch adding a 6 byte HSR header after the 14 byte Ethernet header. For PRP it adds a 6 byte trailer. Tag removal involves automatically stripping the HSR/PRP header/trailer in the switch. This is possible when the switch also performs auto deduplication using the HSR/PRP header/trailer (making it no longer required). Forwarding involves automatically forwarding between redundant ports in an HSR. This is crucial because delay is accumulated as a frame passes through each node in the ring. Duplication involves the switch automatically sending a single frame from the CPU port to both redundant ports. This is required because the inserted HSR/PRP header/trailer must contain the same sequence number on the frames sent out both redundant ports. Export is_hsr_master so DSA can tell them apart from other devices in dsa_slave_changeupper. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: Get link mode in use instead of speed and duplex parametersDanielle Ratson2021-02-041-0/+147
| | | | | | | | | | | Currently, when user space queries the link's parameters, as speed and duplex, each parameter is passed from the driver to ethtool. Instead, get the link mode bit in use, and derive each of the parameters from it in ethtool. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: introduce a netdev feature for UDP GRO forwardingAlexander Lobakin2021-01-241-0/+1
| | | | | | | | | | Introduce a new netdev feature, NETIF_F_GRO_UDP_FWD, to allow user to turn UDP GRO on and off for forwarding. Defaults to off to not change current datapath. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ethtool: Add 100base-FX link mode entriesDan Murphy2020-09-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add entries for the 100base-FX full and half duplex supported modes. $ ethtool eth0 Supported ports: [ FIBRE ] Supported link modes: 100baseFX/Half 100baseFX/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 100baseFX/Half 100baseFX/Full Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: off Port: MII PHYAD: 1 Transceiver: external Supports Wake-on: gs Wake-on: d SecureOn password: 00:00:00:00:00:00 Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: add tunnel info interfaceJakub Kicinski2020-07-101-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an interface to report offloaded UDP ports via ethtool netlink. Now that core takes care of tracking which UDP tunnel ports the NICs are aware of we can quite easily export this information out to user space. The responsibility of writing the netlink dumps is split between ethtool code and udp_tunnel_nic.c - since udp_tunnel module may not always be loaded, yet we should always report the capabilities of the NIC. $ ethtool --show-tunnels eth0 Tunnel information for eth0: UDP port table 0: Size: 4 Types: vxlan No entries UDP port table 1: Size: 4 Types: geneve, vxlan-gpe Entries (1): port 1230, vxlan-gpe v4: - back to v2, build fix is now directly in udp_tunnel.h v3: - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET not set. v2: - fix string set count, - reorder enums in the uAPI, - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset in docs and comments. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: Add support for 100Gbps per lane link modesMeir Lichtinger2020-07-091-0/+15
| | | | | | | | | | | | | | | | Define 100G, 200G and 400G link modes using 100Gbps per lane LR, ER and FR are defined as a single link mode because they are using same technology and by design are fully interoperable. EEPROM content indicates if the module is LR, ER, or FR, and the user space ethtool decoder is planned to support decoding these modes in the EEPROM. Signed-off-by: Meir Lichtinger <meirl@mellanox.com> CC: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethtool: Introduce ethtool_phy_opsFlorian Fainelli2020-07-081-0/+11
| | | | | | | | | In order to decouple ethtool from its PHY library dependency, define an ethtool_phy_ops singleton which can be overriden by the PHY library when it loads with an appropriate set of function pointers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethtool: add missing string for NETIF_F_GSO_TUNNEL_REMCSUMAlexander Lobakin2020-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | Commit e585f2363637 ("udp: Changes to udp_offload to support remote checksum offload") added new GSO type and a corresponding netdev feature, but missed Ethtool's 'netdev_features_strings' table. Give it a name so it will be exposed to userspace and become available for manual configuration. v3: - decouple from "netdev_features_strings[] cleanup" series; - no functional changes. v2: - don't split the "Fixes:" tag across lines; - no functional changes. Fixes: e585f2363637 ("udp: Changes to udp_offload to support remote checksum offload") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethtool: add missing NETIF_F_GSO_FRAGLIST feature stringAlexander Lobakin2020-06-191-0/+1
| | | | | | | | | | | | | Commit 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") missed an entry for NETIF_F_GSO_FRAGLIST in netdev_features_strings array. As a result, fraglist GSO feature is not shown in 'ethtool -k' output and can't be toggled on/off. The fix is trivial. Fixes: 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: provide timestamping information with TSINFO_GET requestMichal Kubecek2020-03-301-0/+21
| | | | | | | | | | | | | | | Implement TSINFO_GET request to get timestamping information for a network device. This is traditionally available via ETHTOOL_GET_TS_INFO ioctl request. Move part of ethtool_get_ts_info() into common.c so that ioctl and netlink code use the same logic to get timestamping information from the device. v3: use "TSINFO" rather than "TIMESTAMP", suggested by Richard Cochran Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: add timestamping related string setsMichal Kubecek2020-03-301-0/+49
| | | | | | | | | | | | | | | | | | | | Add three string sets related to timestamping information: ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags ETH_SS_TS_TX_TYPES: timestamping Tx types ETH_SS_TS_RX_FILTERS: timestamping Rx filters These will be used for TIMESTAMP_GET request. v2: avoid compiler warning ("enumeration value not handled in switch") in net_hwtstamp_validate() v3: omit dash in Tx type names ("one-step-*" -> "onestep-*"), suggested by Richard Cochran Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: introduce the MACSEC netdev featureAntoine Tenart2020-03-271-0/+1
| | | | | | | | | | | | | This patch introduce a new netdev feature, which will be used by drivers to state they can perform MACsec transformations in hardware. The patchset was gathered by Mark, macsec functinality itself was implemented by Dmitry, Mark and Pavel Belous. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethtool: require drivers to set supported_coalesce_paramsJakub Kicinski2020-03-181-0/+11
| | | | | | | | | | | | | Now that all in-tree drivers have been updated we can make the supported_coalesce_params mandatory. To save debugging time in case some driver was missed (or is out of tree) add a warning when netdev is registered with set_coalesce but without supported_coalesce_params. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: set device channel counts with CHANNELS_SET requestMichal Kubecek2020-03-121-0/+31
| | | | | | | | | | | | | | | | | | | | | Implement CHANNELS_SET netlink request to set channel counts of a network device. These are traditionally set with ETHTOOL_SCHANNELS ioctl request. Like the ioctl implementation, the generic ethtool code checks if supplied values do not exceed driver defined limits; if they do, first offending attribute is reported using extack. Checks preventing removing channels used for RX indirection table or zerocopy AF_XDP socket are also implemented. Move ethtool_get_max_rxfh_channel() helper into common.c so that it can be used by both ioctl and netlink code. v2: - fix netdev reference leak in error path (found by Jakub Kicinsky) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: Add support for low latency RS FECAya Levin2020-02-191-0/+1
| | | | | | | | | | | | | Add support for low latency Reed Solomon FEC as LLRS. The LL-FEC is defined by the 25G/50G ethernet consortium, in the document titled "Low Latency Reed Solomon Forward Error Correction" Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
* ethtool: provide WoL settings with WOL_GET requestMichal Kubecek2020-01-271-0/+12
| | | | | | | | | | | | Implement WOL_GET request to get wake-on-lan settings for a device, traditionally available via ETHTOOL_GWOL ioctl request. As part of the implementation, provide symbolic names for wake-on-line modes as ETH_SS_WOL_MODES string set. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: provide message mask with DEBUG_GET requestMichal Kubecek2020-01-271-0/+19
| | | | | | | | | | | | | | Implement DEBUG_GET request to get debugging settings for a device. At the moment, only message mask corresponding to message level as reported by ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in ioctl interface but almost all drivers interpret it as a bit mask.) As part of the implementation, provide symbolic names for message mask bits as ETH_SS_MSG_CLASSES string set. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add fraglist GRO/GSO feature flagsSteffen Klassert2020-01-271-0/+1
| | | | | | | | | | This adds new Fraglist GRO/GSO feature flags. They will be used to configure fraglist GRO/GSO what will be implemented with some followup paches. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: provide link state with LINKSTATE_GET requestMichal Kubecek2019-12-281-0/+8
| | | | | | | | | | | | | | | Implement LINKSTATE_GET netlink request to get link state information. At the moment, only link up flag as provided by ETHTOOL_GLINK ioctl command is returned. LINKSTATE_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-18 15:26:20 +0100