summaryrefslogtreecommitdiffstats
path: root/net/ipv6/icmp.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ipv6: Add rate limit mask for ICMPv6 messagesStephen Suryaputra2019-04-191-9/+22
| | | | | | | | | | | | | | | | | | | | | | | | | To make ICMPv6 closer to ICMPv4, add ratemask parameter. Since the ICMP message types use larger numeric values, a simple bitmask doesn't fit. I use large bitmap. The input and output are the in form of list of ranges. Set the default to rate limit all error messages but Packet Too Big. For Packet Too Big, use ratemask instead of hard-coded. There are functions where icmpv6_xrlim_allow() and icmpv6_global_allow() aren't called. This patch only adds them to icmpv6_echo_reply(). Rate limiting error messages is mandated by RFC 4443 but RFC 4890 says that it is also acceptable to rate limit informational messages. Thus, I removed the current hard-coded behavior of icmpv6_mask_allow() that doesn't rate limit informational messages. v2: Add dummy function proc_do_large_bitmap() if CONFIG_PROC_SYSCTL isn't defined, expand the description in ip-sysctl.txt and remove unnecessary conditional before kfree(). v3: Inline the bitmap instead of dynamically allocated. Still is a pointer to it is needed because of the way proc_do_large_bitmap work. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Add icmp_echo_ignore_anycast for ICMPv6Stephen Suryaputra2019-03-211-2/+14
| | | | | | | | In addition to icmp_echo_ignore_multicast, there is a need to also prevent responding to pings to anycast addresses for security. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Add icmp_echo_ignore_multicast support for ICMPv6Stephen Suryaputra2019-03-191-0/+12
| | | | | | | | | | | IPv4 has icmp_echo_ignore_broadcast to prevent responding to broadcast pings. IPv6 needs a similar mechanism. v1->v2: - Remove NET_IPV6_ICMP_ECHO_IGNORE_MULTICAST. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: icmp: use percpu allocationKefeng Wang2019-02-251-6/+5
| | | | | | | Use percpu allocation for the ipv6.icmp_sk. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: icmp: use icmpv6_sk_exit()Kefeng Wang2019-02-251-14/+11
| | | | | | | | Simply use icmpv6_sk_exit() when inet_ctl_sock_create() fail in icmpv6_sk_init(). Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: make icmp6_send() robust against null skb->devEric Dumazet2019-01-041-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzbot was able to crash one host with the following stack trace : kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 8625 Comm: syz-executor4 Not tainted 4.20.0+ #8 RIP: 0010:dev_net include/linux/netdevice.h:2169 [inline] RIP: 0010:icmp6_send+0x116/0x2d30 net/ipv6/icmp.c:426 icmpv6_send smack_socket_sock_rcv_skb security_sock_rcv_skb sk_filter_trim_cap __sk_receive_skb dccp_v6_do_rcv release_sock This is because a RX packet found socket owned by user and was stored into socket backlog. Before leaving RCU protected section, skb->dev was cleared in __sk_receive_skb(). When socket backlog was finally handled at release_sock() time, skb was fed to smack_socket_sock_rcv_skb() then icmp6_send() We could fix the bug in smack_socket_sock_rcv_skb(), or simply make icmp6_send() more robust against such possibility. In the future we might provide to icmp6_send() the net pointer instead of infering it. Fixes: d66a8acbda92 ("Smack: Inform peer that IPv6 traffic has been blocked") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Piotr Sawicki <p.sawicki2@partner.samsung.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert protocol error handlers from void to intStefano Brivio2018-11-091-1/+3
| | | | | | | | | | | | | | | | | | | We'll need this to handle ICMP errors for tunnels without a sending socket (i.e. FoU and GUE). There, we might have to look up different types of IP tunnels, registered as network protocols, before we get a match, so we want this for the error handlers of IPPROTO_IPIP and IPPROTO_IPV6 in both inet_protos and inet6_protos. These error codes will be used in the next patch. For consistency, return sensible error codes in protocol error handlers whenever handlers can't handle errors because, even if valid, they don't match a protocol or any of its states. This has no effect on existing error handling paths. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Add icmp_echo_ignore_all support for ICMPv6Virgile Jarry2018-08-131-3/+13
| | | | | | | | | | | | | | | | Preventing the kernel from responding to ICMP Echo Requests messages can be useful in several ways. The sysctl parameter 'icmp_echo_ignore_all' can be used to prevent the kernel from responding to IPv4 ICMP echo requests. For IPv6 pings, such a sysctl kernel parameter did not exist. Add the ability to prevent the kernel from responding to IPv6 ICMP echo requests through the use of the following sysctl parameter : /proc/sys/net/ipv6/icmp/echo_ignore_all. Update the documentation to reflect this change. Signed-off-by: Virgile Jarry <virgile@acceis.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: icmp: Updating pmtu for link local routeGeorg Kohmann2018-08-061-1/+1
| | | | | | | | | | | | | | | | | | | | When a ICMPV6_PKT_TOOBIG is received from a link local address the pmtu will be updated on a route with an arbitrary interface index. Subsequent packets sent back to the same link local address may therefore end up not considering the updated pmtu. Current behavior breaks TAHI v6LC4.1.4 Reduce PMTU On-link. Referring to RFC 1981: Section 3: "Note that Path MTU Discovery must be performed even in cases where a node "thinks" a destination is attached to the same link as itself. In a situation such as when a neighboring router acts as proxy [ND] for some destination, the destination can to appear to be directly connected but is in fact more than one hop away." Using the interface index from the incoming ICMPV6_PKT_TOOBIG when updating the pmtu. Signed-off-by: Georg Kohmann <geokohma@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-07-251-2/+3
|\
| * net/ipv6: Fix linklocal to global address with VRFDavid Ahern2018-07-221-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Example setup: host: ip -6 addr add dev eth1 2001:db8:104::4 where eth1 is enslaved to a VRF switch: ip -6 ro add 2001:db8:104::4/128 dev br1 where br1 only has an LLA ping6 2001:db8:104::4 ssh 2001:db8:104::4 (NOTE: UDP works fine if the PKTINFO has the address set to the global address and ifindex is set to the index of eth1 with a destination an LLA). For ICMP, icmp6_iif needs to be updated to check if skb->dev is an L3 master. If it is then return the ifindex from rt6i_idev similar to what is done for loopback. For TCP, restore the original tcp_v6_iif definition which is needed in most places and add a new tcp_v6_iif_l3_slave that considers the l3_slave variability. This latter check is only needed for socket lookups. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: fold sockcm_cookie into ipcm6_cookieWillem de Bruijn2018-07-071-5/+2
| | | | | | | | | | | | | | | | | | | | | | ipcm_cookie includes sockcm_cookie. Do the same for ipcm6_cookie. This reduces the number of arguments that need to be passed around, applies ipcm6_init to all cookie fields at once and reduces code differentiation between ipv4 and ipv6. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: ipcm6_cookie initializerWillem de Bruijn2018-07-071-5/+2
|/ | | | | | | | | Initialize the cookie in one location to reduce code duplication and avoid bugs from inconsistent initialization, such as that fixed in commit 9887cba19978 ("ip: limit use of gso_size to udp"). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: kzalloc() -> kcalloc()Kees Cook2018-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* net: Drop pernet_operations::asyncKirill Tkhai2018-03-271-1/+0
| | | | | | | | Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ipv6: Add support for path selection using hash of 5-tupleDavid Ahern2018-03-041-1/+1
| | | | | | | | | | | | | | | Some operators prefer IPv6 path selection to use a standard 5-tuple hash rather than just an L3 hash with the flow the label. To that end add support to IPv6 for multipath hash policy similar to bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice"). The default is still L3 which covers source and destination addresses along with flow label and IPv6 protocol. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ipv6: Pass skb to route lookupDavid Ahern2018-03-041-1/+2
| | | | | | | | | | | | | IPv6 does path selection for multipath routes deep in the lookup functions. The next patch adds L4 hash option and needs the skb for the forward path. To get the skb to the relevant FIB lookup functions it needs to go through the fib rules layer, so add a lookup_data argument to the fib_lookup_arg struct. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: route: dissect flow in input path if fib rules need itRoopa Prabhu2018-03-011-1/+1
| | | | | | | | | | | | | | | Dissect flow in fwd path if fib rules require it. Controlled by a flag to avoid penatly for the common case. Flag is set when fib rules with sport, dport and proto match that require flow dissect are installed. Also passes the dissected hash keys to the multipath hash function when applicable to avoid dissecting the flow again. icmp packets will continue to use inner header for hash calculations. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert icmpv6_sk_ops, ndisc_net_ops and igmp6_net_opsKirill Tkhai2018-02-191-0/+1
| | | | | | | | | | | | | | | | | These pernet_operations create and destroy net::ipv6.icmp_sk socket, used to send ICMP or error reply. Nobody can dereference the socket to handle a packet before net is initialized, as there is no routing; nobody can do that in parallel with exit, as all of devices are moved to init_net or destroyed and there are no packets it-flight. So, it's possible to mark these pernet_operations as async. The same for ndisc_net_ops and for igmp6_net_ops. The last one also creates and destroys /proc entries. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: mark expected switch fall-throughsGustavo A. R. Silva2017-10-181-4/+2
| | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in some cases I placed the "fall through" comment on its own line, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ipv6: Convert icmpv6_push_pending_frames to voidJoe Perches2017-10-061-25/+18
| | | | | | | | | | | | | | | | commit cc71b7b07119 ("net/ipv6: remove unused err variable on icmpv6_push_pending_frames") exposed icmpv6_push_pending_frames return value not being used. Remove now unnecessary int err declarations and uses. Miscellanea: o Remove unnecessary goto and out: labels o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ipv6: remove unused err variable on icmpv6_push_pending_framesTim Hansen2017-10-061-2/+1
| | | | | | | | | | | int err is unused by icmpv6_push_pending_frames(), this patch returns removes the variable and returns the function with 0. git bisect shows this variable has been around since linux has been in git in commit 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2. This was found by running make coccicheck M=net/ipv6/ on linus' tree on commit 77ede3a014a32746002f7889211f0cecf4803163 (current HEAD as of this patch). Signed-off-by: Tim Hansen <devtimhansen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Use rt6i_idev index for echo replies to a local addressDavid Ahern2017-08-301-13/+20
| | | | | | | | | | | | | | | | | | Tariq repored local pings to linklocal address is failing: $ ifconfig ens8 ens8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 11.141.16.6 netmask 255.255.0.0 broadcast 11.141.255.255 inet6 fe80::7efe:90ff:fecb:7502 prefixlen 64 scopeid 0x20<link> ether 7c:fe:90:cb:75:02 txqueuelen 1000 (Ethernet) RX packets 12 bytes 1164 (1.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 30 bytes 2484 (2.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 $ /bin/ping6 -c 3 fe80::7efe:90ff:fecb:7502%ens8 PING fe80::7efe:90ff:fecb:7502%ens8(fe80::7efe:90ff:fecb:7502) 56 data bytes Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Compute multipath hash for ICMP errors from offending packetJakub Sitnicki2017-08-251-0/+1
| | | | | | | | | | | | | | | | | | | | | When forwarding or sending out an ICMPv6 error, look at the embedded packet that triggered the error and compute a flow hash over its headers. This let's us route the ICMP error together with the flow it belongs to when multipath (ECMP) routing is in use, which in turn makes Path MTU Discovery work in ECMP load-balanced or anycast setups (RFC 7690). Granted, end-hosts behind the ECMP router (aka servers) need to reflect the IPv6 Flow Label for PMTUD to work. The code is organized to be in parallel with ipv4 stack: ip_multipath_l3_keys -> ip6_multipath_l3_keys fib_multipath_hash -> rt6_multipath_hash Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv6: put host and anycast routes on device with addressDavid Ahern2017-08-211-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | One nagging difference between ipv4 and ipv6 is host routes for ipv6 addresses are installed using the loopback device or VRF / L3 Master device. e.g., 2001:db8:1::/120 dev veth0 proto kernel metric 256 pref medium local 2001:db8:1::1 dev lo table local proto kernel metric 0 pref medium Using the loopback device is convenient -- necessary for local tx, but has some nasty side effects, most notably setting the 'lo' device down causes all host routes for all local IPv6 address to be removed from the FIB and completely breaks IPv6 networking across all interfaces. This patch puts FIB entries for IPv6 routes against the device. This simplifies the routes in the FIB, for example by making dst->dev and rt6i_idev->dev the same (a future patch can look at removing the device reference taken for rt6i_idev for FIB entries). When copies are made on FIB lookups, the cloned route has dst->dev set to loopback (or the L3 master device). This is needed for the local Tx of packets to local addresses. With fib entries allocated against the real network device, the addrconf code that reinserts host routes on admin up of 'lo' is no longer needed. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: don't global ICMP rate limit packets originating from loopbackJesper Dangaard Brouer2017-06-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Florian Weimer seems to have a glibc test-case which requires that loopback interfaces does not get ICMP ratelimited. This was broken by commit c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited"). An ICMP response will usually be routed back-out the same incoming interface. Thus, take advantage of this and skip global ICMP ratelimit when the incoming device is loopback. In the unlikely event that the outgoing it not loopback, due to strange routing policy rules, ICMP rate limiting still works via peer ratelimiting via icmpv4_xrlim_allow(). Thus, we should still comply with RFC1812 (section 4.3.2.8 "Rate Limiting"). This seems to fix the reproducer given by Florian. While still avoiding to perform expensive and unneeded outgoing route lookup for rate limited packets (in the non-loopback case). Fixes: c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited") Reported-by: Florian Weimer <fweimer@redhat.com> Reported-by: "H.J. Lu" <hjl.tools@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: for rate-limited ICMP replies save one atomic operationJesper Dangaard Brouer2017-01-091-9/+16
| | | | | | | | | | | | | | | | It is possible to avoid the atomic operation in icmp{v6,}_xmit_lock, by checking the sysctl_icmp_msgs_per_sec ratelimit before these calls, as pointed out by Eric Dumazet, but the BH disabled state must be correct. The icmp_global_allow() call states it must be called with BH disabled. This protection was given by the calls icmp_xmit_lock and icmpv6_xmit_lock. Thus, split out local_bh_disable/enable from these functions and maintain it explicitly at callers. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: reduce cycles spend on ICMP replies that gets rate limitedJesper Dangaard Brouer2017-01-091-15/+34
| | | | | | | | | | | | | | | | | | | | | | | This patch split the global and per (inet)peer ICMP-reply limiter code, and moves the global limit check to earlier in the packet processing path. Thus, avoid spending cycles on ICMP replies that gets limited/suppressed anyhow. The global ICMP rate limiter icmp_global_allow() is a good solution, it just happens too late in the process. The kernel goes through the full route lookup (return path) for the ICMP message, before taking the rate limit decision of not sending the ICMP reply. Details: The kernels global rate limiter for ICMP messages got added in commit 4cdf507d5452 ("icmp: add a global rate limitation"). It is a token bucket limiter with a global lock. It brilliantly avoids locking congestion by only updating when 20ms (HZ/50) were elapsed. It can then avoids taking lock when credit is exhausted (when under pressure) and time constraint for refill is not yet meet. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds2016-12-241-1/+1
| | | | | | | | | | | | | This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-12-031-2/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: handle no dst on skb in icmp6_sendDavid Ahern2016-11-281-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Andrey reported the following while fuzzing the kernel with syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 3859 Comm: a.out Not tainted 4.9.0-rc6+ #429 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800666d4200 task.stack: ffff880067348000 RIP: 0010:[<ffffffff833617ec>] [<ffffffff833617ec>] icmp6_send+0x5fc/0x1e30 net/ipv6/icmp.c:451 RSP: 0018:ffff88006734f2c0 EFLAGS: 00010206 RAX: ffff8800666d4200 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000018 RBP: ffff88006734f630 R08: ffff880064138418 R09: 0000000000000003 R10: dffffc0000000000 R11: 0000000000000005 R12: 0000000000000000 R13: ffffffff84e7e200 R14: ffff880064138484 R15: ffff8800641383c0 FS: 00007fb3887a07c0(0000) GS:ffff88006cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000006b040000 CR4: 00000000000006f0 Stack: ffff8800666d4200 ffff8800666d49f8 ffff8800666d4200 ffffffff84c02460 ffff8800666d4a1a 1ffff1000ccdaa2f ffff88006734f498 0000000000000046 ffff88006734f440 ffffffff832f4269 ffff880064ba7456 0000000000000000 Call Trace: [<ffffffff83364ddc>] icmpv6_param_prob+0x2c/0x40 net/ipv6/icmp.c:557 [< inline >] ip6_tlvopt_unknown net/ipv6/exthdrs.c:88 [<ffffffff83394405>] ip6_parse_tlv+0x555/0x670 net/ipv6/exthdrs.c:157 [<ffffffff8339a759>] ipv6_parse_hopopts+0x199/0x460 net/ipv6/exthdrs.c:663 [<ffffffff832ee773>] ipv6_rcv+0xfa3/0x1dc0 net/ipv6/ip6_input.c:191 ... icmp6_send / icmpv6_send is invoked for both rx and tx paths. In both cases the dst->dev should be preferred for determining the L3 domain if the dst has been set on the skb. Fallback to the skb->dev if it has not. This covers the case reported here where icmp6_send is invoked on Rx before the route lookup. Fixes: 5d41ce29e ("net: icmp6_send should use dst dev to determine L3 domain") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-11-151-1/+1
|\| | | | | | | | | | | | | Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: icmp6_send should use dst dev to determine L3 domainDavid Ahern2016-11-081-1/+1
| | | | | | | | | | | | | | | | | | | | icmp6_send is called in response to some event. The skb may not have the device set (skb->dev is NULL), but it is expected to have a dst set. Update icmp6_send to use the dst on the skb to determine L3 domain. Fixes: ca254490c8dfd ("net: Add VRF support to IPv6 stack") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: inet: Support UID-based routing in IP protocols.Lorenzo Colitti2016-11-041-2/+5
|/ | | | | | | | | | | | | | | | | | | | | | | - Use the UID in routing lookups made by protocol connect() and sendmsg() functions. - Make sure that routing lookups triggered by incoming packets (e.g., Path MTU discovery) take the UID of the socket into account. - For packets not associated with a userspace socket, (e.g., ping replies) use UID 0 inside the user namespace corresponding to the network namespace the socket belongs to. This allows all namespaces to apply routing and iptables rules to kernel-originated traffic in that namespaces by matching UID 0. This is better than using the UID of the kernel socket that is sending the traffic, because the UID of kernel sockets created at namespace creation time (e.g., the per-processor ICMP and TCP sockets) is the UID of the user that created the socket, which might not be mapped in the namespace. Tested: compiles allnoconfig, allyesconfig, allmodconfig Tested: https://android-review.googlesource.com/253302 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-06-301-1/+1
|\ | | | | | | | | | | | | | | Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: fix endianness error in icmpv6_errHannes Frederic Sowa2016-06-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | IPv6 ping socket error handler doesn't correctly convert the new 32 bit mtu to host endianness before using. Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 6d0bfe22611602f ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: RFC 4884 partial support for SIT/GRE tunnelsEric Dumazet2016-06-191-4/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When receiving an ICMPv4 message containing extensions as defined in RFC 4884, and translating it to ICMPv6 at SIT or GRE tunnel, we need some extra manipulation in order to properly forward the extensions. This patch only takes care of Time Exceeded messages as they are the ones that typically carry information from various routers in a fabric during a traceroute session. It also avoids complex skb logic if the data_len is not a multiple of 8. RFC states : The "original datagram" field MUST contain at least 128 octets. If the original datagram did not contain 128 octets, the "original datagram" field MUST be zero padded to 128 octets. In practice routers use 128 bytes of original datagram, not more. Initial translation was added in commit ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: translate ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEEDEric Dumazet2016-06-191-3/+9
| | | | | | | | | | | | | | | | | | | | | | For better traceroute/mtr support for SIT and GRE tunnels, we translate IPV4 ICMP ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEED We also have to translate the IPv4 source IP address of ICMP message to IPv6 v4mapped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ip6: move ipip6_err_gen_icmpv6_unreach()Eric Dumazet2016-06-191-0/+39
| | | | | | | | | | | | | | | | | | | | | | We want to use this helper from GRE as well, so this is the time to move it in net/ipv6/icmp.c Also add a @nhs parameter, since SIT and GRE have different values for the header(s) to skip. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: icmp: add a force_saddr param to icmp6_send()Eric Dumazet2016-06-191-2/+5
| | | | | | | | | | | | | | | | | | | | | | SIT or GRE tunnels might want to translate an IPV4 address into a v4mapped one when translating ICMP to ICMPv6. This patch adds the parameter to icmp6_send() but does not change icmpv6_send() signature. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: vrf: Handle ipv6 multicast and link-local addressesDavid Ahern2016-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: use TOS marks from sockets for routing decisionHannes Frederic Sowa2016-06-121-1/+3
|/ | | | | | | | | | In IPv6 the ToS values are part of the flowlabel in flowi6 and get extracted during fib rule lookup, but we forgot to correctly initialize the flowlabel before the routing lookup. Reported-by: <liam.mcbirnie@boeing.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-05-091-3/+2
|\ | | | | | | | | | | | | | | | | | | In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ipv6: tcp reset, icmp need to consider L3 domainDavid Ahern2016-05-061-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Responses for packets to unused ports are getting lost with L3 domains. IPv4 has ip_send_unicast_reply for sending TCP responses which accounts for L3 domains; update the IPv6 counterpart tcp_v6_send_response. For icmp the L3 master check needs to be moved up in icmp6_send to properly respond to UDP packets to a port with no listener. Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: add new struct ipcm6_cookieWei Wang2016-05-031-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: kill ICMP6MSGIN_INC_STATS_BH()Eric Dumazet2016-04-281-1/+1
| | | | | | | | | | | | | | IPv6 ICMP stats are atomics anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: rename ICMP6_INC_STATS_BH()Eric Dumazet2016-04-281-5/+5
| | | | | | | | | | | | | | Rename ICMP6_INC_STATS_BH() to __ICMP6_INC_STATS() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sock: enable timestamping using control messagesSoheil Hassas Yeganeh2016-04-041-2/+4
|/ | | | | | | | | | | | | | | | | | | | | | | Currently, SOL_TIMESTAMPING can only be enabled using setsockopt. This is very costly when users want to sample writes to gather tx timestamps. Add support for enabling SO_TIMESTAMPING via control messages by using tsflags added in `struct sockcm_cookie` (added in the previous patches in this series) to set the tx_flags of the last skb created in a sendmsg. With this patch, the timestamp recording bits in tx_flags of the skbuff is overridden if SO_TIMESTAMPING is passed in a cmsg. Please note that this is only effective for overriding the recording timestamps flags. Users should enable timestamp reporting (e.g., SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_OPT_ID) using socket options and then should ask for SOF_TIMESTAMPING_TX_* using control messages per sendmsg to sample timestamps for each write. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: kill sk_dst_lockEric Dumazet2015-12-031-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While testing the np->opt RCU conversion, I found that UDP/IPv6 was using a mixture of xchg() and sk_dst_lock to protect concurrent changes to sk->sk_dst_cache, leading to possible corruptions and crashes. ip6_sk_dst_lookup_flow() uses sk_dst_check() anyway, so the simplest way to fix the mess is to remove sk_dst_lock completely, as we did for IPv4. __ip6_dst_store() and ip6_dst_store() share same implementation. sk_setup_caps() being called with socket lock being held or not, we have to use sk_dst_set() instead of __sk_dst_set() Note that I had to move the "np->dst_cookie = rt6_get_cookie(rt);" in ip6_dst_store() before the sk_setup_caps(sk, dst) call. This is because ip6_dst_store() can be called from process context, without any lock held. As soon as the dst is installed in sk->sk_dst_cache, dst can be freed from another cpu doing a concurrent ip6_dst_store() Doing the dst dereference before doing the install is needed to make sure no use after free would trigger. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: icmp: include addresses in debug messagesBjørn Mork2015-10-271-4/+8
| | | | | | | | | Messages like "icmp6_send: no reply to icmp error" are close to useless. Adding source and destination addresses to provide some more clue. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 13:26:47 +0100