summaryrefslogtreecommitdiffstats
path: root/net/mac80211/status.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: use rhashtable for station tableJohannes Berg2015-04-011-2/+6
| | | | | | | | | | | | | | | | | | | | | | We currently have a hand-rolled table with 256 entries and are using the last byte of the MAC address as the hash. This hash is obviously very fast, but collisions are easily created and we waste a lot of space in the common case of just connecting as a client to an AP where we just have a single station. The other common case of an AP is also suboptimal due to the size of the hash table and the ease of causing collisions. Convert all of this to use rhashtable with jhash, which gives us the advantage of a far better hash function (with random perturbation to avoid hash collision attacks) and of course that the hash table grows and shrinks dynamically with chain length, improving both cases above. Use a specialised hash function (using jhash, but with fixed length) to achieve better compiler optimisation as suggested by Sergey Ryazanov. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: remove TX latency measurement codeJohannes Berg2015-02-281-74/+0
| | | | | | | | | | | | | | | | Revert commit ad38bfc916da ("mac80211: Tx frame latency statistics") (along with some follow-up fixes). This code turned out not to be as useful in the current form as we thought, and we've internally hacked it up more, but that's not very suitable for upstream (for now), and we might just do that with tracing instead. Therefore, for now at least, remove this code. We might also need to use the skb->tstamp field for the TCP performance issue, which is more important than the debugging. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: remove doubled semicolonJohannes Berg2015-01-161-1/+1
| | | | Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: provide per-TID RX/TX MSDU countersJohannes Berg2015-01-081-2/+13
| | | | | | | | | Implement the new counters cfg80211 can now advertise to userspace. The TX code is in the sequence number handler, which is a bit odd, but that place already knows the TID and frame type, so it was easiest and least impact there. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix dot11MulticastTransmittedFrameCount tested addressEliad Peller2014-12-231-1/+1
| | | | | | | | | | | | | | dot11MulticastTransmittedFrameCount should be updated according to the DA, which might be different from A1. Checking A1 results in the counter being 0 in case of station, as to-DS data frames use A1 for the BSSID. This behaviour is defined in state machines, specifically in the sta_tx_dcf_3.1d(10) description of 802.11-2012. Signed-off-by: Eliad Peller <eliad@wizery.com> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Fix accounting of multicast framesSujith Manoharan2014-12-121-3/+6
| | | | | | | | | | | | | | | | | Since multicast frames are marked as no-ack, using IEEE80211_TX_STAT_ACK to check if they have been successfully transmitted by the driver is incorrect since a driver can choose to ignore transmission status for no-ack frames. This results in incorrect accounting for such frames. To fix this issue, this patch introduces a new flag that can be used by drivers to indicate error-free transmission of no-ack frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> [add a note about not setting the flag for non-no-ack frames] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add ieee80211_tx_status_noskbFelix Fietkau2014-11-281-0/+54
| | | | | | | | This can be used by drivers that cannot reliably map tx status information onto specific skbs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac0211: add a helper function for fixing up tx status ratesFelix Fietkau2014-11-281-19/+33
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: pass tx info to ieee80211_lost_packet instead of an skbFelix Fietkau2014-11-281-4/+3
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: retransmit TDLS teardown packet through AP if not ACKedLiad Kaufman2014-11-191-2/+53
| | | | | | | | | | | Since the TDLS peer station might not receive the teardown packet (e.g., when in PS), this makes sure the packet is retransmitted - this time through the AP - if the TDLS peer didn't ACK the packet. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add WMM admission control supportJohannes Berg2014-10-221-1/+2
| | | | | | | | | | | | | | | | | | | | Use the currently existing APIs between mac80211 and the low level driver to implement WMM admission control. The low level driver needs to report the media time used by each transmitted packet in ieee80211_tx_status. Based on that information, mac80211 will modify the QoS parameters of the admission controlled Access Category when the limit is reached. Once the original QoS parameters can be restored, mac80211 will do so. One issue with this approach is that management frames will also erroneously be downgraded, but the upside is that the implementation is simple. In the future, it can be extended to driver- or device-based implementations that are better. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add TDLS connection timeoutLiad Kaufman2014-09-111-1/+20
| | | | | | | | | | | | | | | Adding a timeout for tearing down a TDLS connection that hasn't had ACKed traffic sent through it for a certain amount of time. Since we have no other monitoring facility to indicate the existance (or non-existance) of a peer, this patch will cause a peer to be considered as unavailable if for some X time at least some Y packets have all not been ACKed. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add Intel Mobile Communications copyrightJohannes Berg2014-09-051-0/+1
| | | | | | | | | | | | | Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* net: Mac80211: Remove silly timespec danceThomas Gleixner2014-06-231-5/+2
| | | | | | | | | | | | | | Converting time from one format to another seems to give coders a warm and fuzzy feeling. Use the proper interfaces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John W. Linville <linville@tuxdriver.com> [fix compile error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville2014-05-291-6/+19
|\
| * mac80211: reduce packet loss notifications under loadFelix Fietkau2014-05-281-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | During strong signal fluctuations under high throughput, few consecutive failed A-MPDU transmissions can easily trigger packet loss notification, and thus (in AP mode) client disconnection. Reduce the number of false positives by checking the A-MPDU status flag and treating a failed A-MPDU as a single packet. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: fixup radiotap tx flags for RTS/CTSBob Copeland2014-04-221-3/+2
| | | | | | | | | | | | | | | | | | When using RTS/CTS, the CTS-to-Self bit in radiotap TX flags is getting set instead of the RTS bit. Set the correct one. Reported-by: Larry Maxwell <larrymaxwell@agilemesh.com> Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: update last_tx_rate only for data frameChun-Yeow Yeoh2014-04-091-0/+1
|/ | | | | | | | | | | | Rate controller in firmware may also return the Tx Rate used for management frame that is usually sent as lowest Tx Rate (1Mbps in 2.4GHz). So update the last_tx_rate only if it is data frame. This patch is tested with ath9k_htc. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: remove set but unused variablesJohannes Berg2014-02-041-2/+1
| | | | | | | Compiling with W=1 found a few variables that are set but not used (-Wunused-but-set-variable), remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Tx frame latency statisticsMatti Gottlieb2013-12-021-0/+78
| | | | | | | | | | | | | | | Measure TX latency and jitter statistics per station per TID. These Measurements are disabled by default and can be enabled via debugfs. Features included for each station's TID: 1. Keep count of the maximum and average latency of Tx frames. 2. Keep track of many frames arrived in a specific time range (need to enable through debugfs and configure the bins ranges) Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge branch 'for-john' of ↵John W. Linville2013-11-051-12/+19
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/wireless/reg.c
| * mac80211: implement SMPS for APEmmanuel Grumbach2013-10-281-12/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the driver requests to move to STATIC or DYNAMIC SMPS, we send an action frame to each associated station and reconfigure the channel context / driver. Of course, non-MIMO stations are ignored. The beacon isn't updated. The association response will include the original capabilities. Stations that associate while in non-OFF SMPS mode will get an action frame right after association to inform them about our current state. Note that we wait until the end of the EAPOL. Sending an action frame before the EAPOL is finished can be an issue for a few clients. Clients aren't likely to send EAPOL frames in MIMO anyway. When the SMPS configuration gets more permissive (e.g. STATIC -> OFF), we don't wake up stations that are asleep We remember that they don't know about the change and send the action frame when they wake up. When the SMPS configuration gets more restrictive (e.g. OFF -> STATIC), we set the TIM bit for every sleeping STA. uAPSD stations might send MIMO until they poll the action frame, but this is for a short period of time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [fix vht streams loop, initialisation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: update sta->last_rx on acked tx framesFelix Fietkau2013-09-301-0/+3
|/ | | | | | | | | | | | | | When clients are idle for too long, hostapd sends nullfunc frames for probing. When those are acked by the client, the idle time needs to be updated. To make this work (and to avoid unnecessary probing), update sta->last_rx whenever an ACK was received for a tx packet. Only do this if the flag IEEE80211_HW_REPORTS_TX_ACK_STATUS is set. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: report some VHT radiotap infos for tx statusKarl Beldan2013-08-011-13/+63
| | | | | | | | | | | | | | | | | | | | The radiotap VHT info is 12 bytes (required to be aligned on 2) : u16 known - IEEE80211_RADIOTAP_VHT_KNOWN_* u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_* u8 bandwidth u8 mcs_nss[4] u8 coding u8 group_id u16 partial_aid ATM mac80211 can handle IEEE80211_RADIOTAP_VHT_KNOWN_{GI,BANDWIDTH} and mcs_nss[0] (i.e single user) in simple cases. This is more a placeholder to let sniffers give more clues for VHT, since we don't have yet the proper infrastructure/conventions in mac80211 for complete feedback (e.g consider dynamic BW). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: use oneshot blink API for LED triggersFabio Baltieri2013-08-011-1/+1
| | | | | | | | | | | | | | Change mac80211 LED trigger code to use the generic led_trigger_blink_oneshot() API for transmit and receive activity indication. This gives a better feedback to the user, as with the new API each activity event results in a visible blink, while a constant traffic results in a continuous blink at constant rate. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> [fix LED disabled build error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: select and adjust bitrates according to channel modeSimon Wunderlich2013-07-161-5/+13
| | | | | | | | | | | | | | | | The various components accessing the bitrates table must use consider the used channel bandwidth to select only available rates or calculate the bitrate correctly. There are some rates in reduced bandwidth modes which can't be represented as multiples of 500kbps, like 2.25 MBit/s in 5 MHz mode. The standard suggests to round up to the next multiple of 500kbps, just do that in mac80211 as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [make rate unsigned in ieee80211_add_tx_radiotap_header(), squash fix] Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
* mac80211: mesh power save basicsMarco Porsch2013-02-041-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: start auth/assoc timeout on frame statusJohannes Berg2013-01-311-4/+8
| | | | | | | | | | | | | | | | | | | When sending authentication/association frames they might take a bit of time to go out because we may have to synchronise with the AP, in particular in the case where it's really a P2P GO. In this case the 200ms fixed timeout could potentially be too short if the beacon interval is relatively large. For drivers that report TX status we can do better. Instead of starting the timeout directly, start it only when the frame status arrives. Since then the frame was out on the air, we can wait shorter (the typical response time is supposed to be 30ms, wait 100ms.) Also, if the frame failed to be transmitted try again right away instead of waiting. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: remove IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAILStanislaw Gruszka2013-01-291-5/+1
| | | | | | | | | | | | | | | | | | | | | | This is basically a revert of: commit 5b632fe85ec82e5c43740b52e74c66df50a37db3 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Mon Dec 3 12:56:33 2012 +0100 mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL We do not need this flag any longer, rt2x00 BAR/BA problem was fixed correctly by wireless-testing commit: commit 84e9e8ebd369679a958200a8baca96aafb2393bb Author: Helmut Schaa <helmut.schaa@googlemail.com> Date: Thu Jan 17 17:34:32 2013 +0100 rt2x00: Improve TX status handling for BlockAckReq frames Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-nextJohn W. Linville2012-12-111-1/+5
|\
| * mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAILStanislaw Gruszka2012-12-051-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f0425beda4d404a6e751439b562100b902ba9c98 "mac80211: retry sending failed BAR frames later instead of tearing down aggr" caused regression on rt2x00 hardware (connection hangs). This regression was fixed by commit be03d4a45c09ee5100d3aaaedd087f19bc20d01 "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails". But the latter commit caused yet another problem reported in https://bugzilla.kernel.org/show_bug.cgi?id=42828#c22 After long discussion in this thread: http://mid.gmane.org/20121018075615.GA18212@redhat.com and testing various alternative solutions, which failed on one or other setup, we have no other good fix for the issues like just revert both mentioned earlier commits. To do not affect other hardware which benefit from commit f0425beda4d404a6e751439b562100b902ba9c98, instead of reverting it, introduce flag that when used will restore mac80211 behaviour before the commit. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> [replaced link with mid.gmane.org that has message-id] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge branch 'for-john' of ↵John W. Linville2012-12-061-0/+3
|\| | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mwifiex/sta_ioctl.c net/mac80211/scan.c
| * mac80211: add debugfs file for last ack signalSaravana2012-11-291-0/+3
| | | | | | | | | | | | | | | | | | Add a debugfs file showing the signal strength of the ack frame that is received for the currently sent tx packet Signed-off-by: Saravana <saravanad@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge branch 'master' of ↵John W. Linville2012-11-211-0/+9
|\ \ | |/ |/| | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c drivers/net/wireless/iwlwifi/pcie/tx.c
| * mac80211: call skb_dequeue/ieee80211_free_txskb instead of __skb_queue_purgeFelix Fietkau2012-11-101-0/+9
| | | | | | | | | | | | | | | | Fixes more wifi status skb leaks, leading to hostapd/wpa_supplicant hangs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: combine status/drop reportingJohannes Berg2012-10-301-74/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TX status reporting is done for both the nl80211 report as well as the socket option. The socket option is also reported when an skb is dropped to guarantee that the copy in the IDR tree is freed and status is reported to userspace. However, when a frame is dropped, no nl80211 status is reported. This can cause userspace to stop making progress while waiting for a status notification. Combine the nl80211 and socket option status reporting into a new function and call it in both places -- when the status comes in from the driver and when the skb is dropped. While at it, also simplify the code in the nl80211 portion a bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: track needed RX chains for channel contextsJohannes Berg2012-10-171-7/+8
|/ | | | | | | | | | | | | | | | | On each channel that the device is operating on, it may need to listen using one or more chains depending on the SMPS settings of the interfaces using it. The previous channel context changes completely removed this ability (before, it was available as the SMPS mode). Add per-context tracking of the required static and dynamic RX chains and notify the driver on changes. To achieve this, track the chains and SMPS mode used on each virtual interface and update the channel context whenever this changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: use ieee80211_free_txskb to fix possible skb leaksFelix Fietkau2012-10-081-2/+2
| | | | | | | | | | A few places free skbs using dev_kfree_skb even though they're called after ieee80211_subif_start_xmit might have cloned it for tracking tx status. Use ieee80211_free_txskb here to prevent skb leaks. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: validate skb->dev in the tx status pathFelix Fietkau2012-09-101-18/+30
| | | | | | | | | | | skb->dev might contain a stale reference to a device that was already deleted, and using it unchecked can lead to invalid pointer accesses. Since this is only used for nl80211 tx, iterate over active interfaces to find a match for skb->dev, and discard the tx status if the device is gone. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: support P2P Device abstractionJohannes Berg2012-08-201-7/+15
| | | | | | | | | | After cfg80211 got a P2P Device abstraction, add support to mac80211. Whether it really is supported or not will depend on whether or not the driver has support for it, but mac80211 needs to change to be able to support drivers that need a P2P Device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: use wdev in mgmt-tx/ROC APIsJohannes Berg2012-07-091-2/+7
| | | | | | | | | | | The management frame and remain-on-channel APIs will be needed in the P2P device abstraction, so move them over to the new wdev-based APIs. Userspace can still use both the interface index and wdev identifier for them so it's backward compatible, but for the P2P Device wdev it will be able to use the wdev identifier only. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: clean up debuggingJohannes Berg2012-06-241-7/+4
| | | | | | | | | | | | | | | | | | There are a few things that make the logging and debugging in mac80211 less useful than it should be right now: * a lot of messages should be pr_info, not pr_debug * wholesale use of pr_debug makes it require *both* Kconfig and dynamic configuration * there are still a lot of ifdefs * the style is very inconsistent, sometimes the sdata->name is printed in front Clean up everything, introducing new macros and separating out the station MLME debugging into a new Kconfig symbol. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: two small verbose debug cleanupsJohannes Berg2012-06-221-1/+1
| | | | | | | Two instances of CONFIG_MAC80211_VERBOSE_DEBUG should be different, fix them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: unify SW/offload remain-on-channelJohannes Berg2012-06-061-24/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Redesign all the off-channel code, getting rid of the generic off-channel work concept, replacing it with a simple remain-on-channel list. This fixes a number of small issues with the ROC implementation: * offloaded remain-on-channel couldn't be queued, now we can queue it as well, if needed * in iwlwifi (the only user) offloaded ROC is mutually exclusive with scanning, use the new queue to handle that case -- I expect that it will later depend on a HW flag The bigger issue though is that there's a bad bug in the current implementation: if we get a mgmt TX request while HW roc is active, and this new request has a wait time, we actually schedule a software ROC instead since we can't guarantee the existing offloaded ROC will still be that long. To fix this, the queuing mechanism was needed. The queuing mechanism for offloaded ROC isn't yet optimal, ideally we should add API to have the HW extend the ROC if needed. We could add that later but for now use a software implementation. Overall, this unifies the behaviour between the offloaded and software-implemented case as much as possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net: mac80211: Convert printk(KERN_DEBUG to pr_debugJoe Perches2012-06-051-1/+1
| | | | | | | | | Standardize the debugging to be able to use dynamic_debug. Coalesce formats, align arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Convert compare_ether_addr to ether_addr_equalJoe Perches2012-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211: fix an issue in ieee80211_tx_info count field managementLorenzo Bianconi2012-04-131-1/+7
| | | | | | | | | | | | I noticed a possible issue in the status count field management of the ieee80211_tx_info data structure. In particular, when the AGGR processing is employed, status.rates[].count is set just for the first frame and not for others belonging to the same burst, leading to wrong statistic data in the mac80211 debug file system. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use compare_ether_addr on MAC addresses instead of memcmpFelix Fietkau2012-03-051-1/+2
| | | | | | | | | Because of the constant size and guaranteed 16 bit alignment, the inline compare_ether_addr function is much cheaper than calling memcmp. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up asm/unaligned.h inclusionJohannes Berg2012-02-271-0/+1
| | | | | | | | | | | Some files implicitly get this via mesh.h which itself doesn't need it, so move the inclusion into the right files. Some other files don't need it at all but include it, so remove it from there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix a few -Wshadow warningsJohannes Berg2012-01-271-3/+3
| | | | | | | | It seems that -Wshadow is no longer default in sparse runs, but let's fix the warnings anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 00:10:09 +0100