summaryrefslogtreecommitdiffstats
path: root/net/mac80211/util.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: implement fair queueing per txqMichal Kazior2016-06-091-21/+2
| | | | | | | | | | | | | | | | | | | | | mac80211's software queues were designed to work very closely with device tx queues. They are required to make use of 802.11 packet aggregation easily and efficiently. Due to the way 802.11 aggregation is designed it only makes sense to keep fair queuing as close to hardware as possible to reduce induced latency and inertia and provide the best flow responsiveness. This change doesn't translate directly to immediate and significant gains. End result depends on driver's induced latency. Best results can be achieved if driver keeps its own tx queue/fifo fill level to a minimum. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: skip netdev queue control with software queuingMichal Kazior2016-06-091-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qdiscs are designed with no regard to 802.11 aggregation requirements and hand out packet-by-packet with no guarantee they are destined to the same tid. This does more bad than good no matter how fairly a given qdisc may behave on an ethernet interface. Software queuing used per-AC netdev subqueue congestion control whenever a global AC limit was hit. This meant in practice a single station or tid queue could starve others rather easily. This could resonate with qdiscs in a bad way or could just end up with poor aggregation performance. Increasing the AC limit would increase induced latency which is also bad. Disabling qdiscs by default and performing taildrop instead of netdev subqueue congestion control on the other hand makes it possible for tid queues to fill up "in the meantime" while preventing stations starving each other. This increases aggregation opportunities and should allow software queuing based drivers achieve better performance by utilizing airtime more efficiently with big aggregates. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: remove enum ieee80211_bandJohannes Berg2016-04-121-12/+12
| | | | | | | | | This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: allow not sending MIC up from driver for HW cryptoSara Sharon2016-04-051-2/+3
| | | | | | | | | | | | | | | When HW crypto is used, there's no need for the CCMP/GCMP MIC to be available to mac80211, and the hardware might have removed it already after checking. The MIC is also useless to have when the frame is already decrypted, so allow indicating that it's not present. Since we are running out of bits in mac80211_rx_flags, make the flags field a u64. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'mac80211-next-for-davem-2016-02-26' of ↵David S. Miller2016-03-011-27/+89
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another round of updates for -next: * big A-MSDU RX performance improvement (avoid linearize of paged RX) * rfkill changes: cleanups, documentation, platform properties * basic PBSS support in cfg80211 * MU-MIMO action frame processing support * BlockAck reordering & duplicate detection offload support * various cleanups & little fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211: move MU_MIMO_OWNER flag to ieee80211_vifSara Sharon2016-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | Drivers may need to track which vif is using VHT MU-MIMO. Move the flag indicationg the ownership of MU_MIMO to ieee80211_vif. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: Interoperability workaround for 80+80 and 160 MHz channelsJouni Malinen2016-02-241-2/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Number of deployed 80 MHz capable VHT stations that do not support 80+80 and 160 MHz bandwidths seem to misbehave when trying to connect to an AP that advertises 80+80 or 160 MHz channel bandwidth in the VHT Operation element. To avoid such issues with deployed devices, modify the design based on recently accepted IEEE 802.11 standard changes (*). This allows poorly implemented VHT 80 MHz stations to connect with the AP in 80 MHz mode. 80+80 and 160 MHz capable stations need to support the new workaround mechanism to allow full bandwidth to be used. However, there are more or less no impacted station with 80+80/160 capability deployed. The rebased version of this patch is based on the updated version from Johannes Berg to take the HT/VHT chandef refactoring into account. (*) Changes in https://mentor.ieee.org/802.11/dcn/15/11-15-1530-04-000m-vht160-operation-signaling-through-non-zero-ccfs1.docx were accepted during the IEEE 802.11 January 2016 meeting. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: expose txq queue depth and size to driversMichal Kazior2016-02-241-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will allow drivers to make more educated decisions whether to defer transmission or not. Relying on wake_tx_queue() call count implicitly was not possible because it could be called without queued frame count actually changing on software tx aggregation start/stop code paths. It was also not possible to know how long byte-wise queue was without dequeueing. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: add RX_FLAG_MACTIME_PLCP_STARTJohannes Berg2016-02-241-1/+13
| | | | | | | | | | | | | | | | | | The timestamp given by iwlwifi is at the beginning of the frame over the air, at (or during) the SYNC field. Allow such timestamps to be given to mac80211, at least (for now) for frames with non-HT/VHT preambles. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: refactor HT/VHT to chandef codeJohannes Berg2016-02-241-24/+30
| | | | | | | | | | | | | | | | | | The station MLME and IBSS/mesh ones use entirely different code for interpreting HT and VHT operation elements. Change the code that interprets them a bit - it now modifies an existing chandef - and use it also in the MLME code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: process and save VHT MU-MIMO group frameSara Sharon2016-01-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The Group ID Management frame is an Action frame of category VHT. It is transmitted by the AP to assign or change the user position of a STA for one or more group IDs. Process and save the group membership data. Notify underlying driver of changes. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: clear local->sched_scan_req properly on reconfigEliad Peller2016-01-141-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On reconfig, in case of sched_scan_req->n_scan_plans > 1, local->sched_scan_req was never cleared, although cfg80211_sched_scan_stopped_rtnl() was called, resulting in local->sched_scan_req holding a stale and preventing further scheduled scan requests. Clear it explicitly in this case. Fixes: 42a7e82c6792 ("mac80211: Do not restart scheduled scan if multiple scan plans are set") Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: avoid ROC during hw restartEliad Peller2016-01-141-2/+9
|/ | | | | | | | | | Defer ROC requests during hw restart, as the driver might not be fully configured in this stage (e.g. channel contexts were not added yet) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-12-181-50/+63
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211: reprogram in interface orderJohannes Berg2015-12-151-39/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During reprogramming, mac80211 currently first adds all the channel contexts, then binds them to the vifs and then goes to reconfigure all the interfaces. Drivers might, perhaps implicitly, rely on the operation order for certain things that typically happen within a single function elsewhere in mac80211. To avoid problems with that, reorder the code in mac80211's restart/reprogramming to work fully within the interface loop so that the order of operations is like in normal operation. For iwlwifi, this fixes a firmware crash when reprogramming with an AP/GO interface active. Reported-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: run scan completed work on reconfig failureJohannes Berg2015-12-151-11/+26
| | | | | | | | | | | | | | | | | | When reconfiguration during resume fails while a scan is pending for completion work, that work will never run, and the scan will be stuck forever. Factor out the code to recover this and call it also in ieee80211_handle_reconfig_failure(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: catch queue stop underflowJohannes Berg2015-12-041-2/+5
|/ | | | | | | | If some code stops the queues more times than having started (for when refcounting is used), warn on and reset the counter to 0 to avoid blocking forever. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: make enable_qos parameter to ieee80211_set_wmm_default()Johannes Berg2015-11-031-9/+2
| | | | | | | | The function currently determines this value, for use in bss_info.qos, based on the interface type itself. Make it a parameter instead and set it with the same logic for now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: TDLS: add proper HT-oper IEArik Nemtsov2015-11-031-1/+4
| | | | | | | | | | | When 11n peers performs a TDLS connection on a legacy BSS, the HT operation IE must be specified according to IEEE802.11-2012 section 9.23.3.2. Otherwise HT-protection is compromised and the medium becomes noisy for both the TDLS and the BSS links. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: don't reconfigure sched scan in case of wowlanEliad Peller2015-11-031-26/+23
| | | | | | | | | | | | | | | | Scheduled scan has to be reconfigured only if wowlan wasn't configured, since otherwise it should continue to run (with the 'any' trigger) or be aborted. The current code will end up asking the driver to start a new scheduled scan without stopping the previous one, and leaking some memory (from the previous request.) Fix this by doing the abort/restart under the proper conditions. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: call drv_stop only if driver is startedEliad Peller2015-11-031-1/+2
| | | | | | | | | | | | | | | | | | | | If drv_start() fails during hw_restart, all the running interfaces are being closed/stopped, which results in drv_stop() being called, although the driver was never started successfully. This might cause drivers to perform operations on uninitialized memory (as they assume it was initialized on drv_start) Consider the local->started flag, and call the driver's stop() op only if drv_start() succeeded before. Move drv_start() and drv_stop() to driver-ops.c, as they are no longer simple wrappers. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Remove WARN_ON_ONCE in ieee80211_recalc_smpsAndrei Otcheretianski2015-11-031-1/+7
| | | | | | | | | | | | The recalc_smps work can run after the station disassociates. At this stage we already released the channel, but the work will be cancelled only when the interface stops. In this scenario we can hit the warning in ieee80211_recalc_smps, so just remove it. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: use freezable workqueue for restart workEliad Peller2015-11-031-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Requesting hw restart during suspend might result in the restart work being executed after mac80211 and the hw are suspended. Solve the race by simply scheduling the restart work on a freezable workqueue. Note that there can be some cases of reconfiguration on resume (besides the hardware restart): * wowlan is not configured - All the interfaces removed were removed on suspend, and drv_stop() was called. At this point the driver shouldn't expect for hw_restart anyway, so we can simply cancel it (on resume). * wowlan is configured, drv_resume() == 1 There is no definitive expected behavior in this case, as each driver might have different expectations (e.g. setting some flags on suspend/restart vs. not handling spurious recovery). For now, simply let the hw_restart work run again after resume, and hope the driver will handle it well (or at least initiate another hw restart). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix divide by zero when NOA updateJanusz.Dziedzic@tieto.com2015-11-031-0/+7
| | | | | | | | | | | | | | | | | | | | | | In case of one shot NOA the interval can be 0, catch that instead of potentially (depending on the driver) crashing like this: divide error: 0000 [#1] SMP [...] Call Trace: <IRQ> [<ffffffffc08e891c>] ieee80211_extend_absent_time+0x6c/0xb0 [mac80211] [<ffffffffc08e8a17>] ieee80211_update_p2p_noa+0xb7/0xe0 [mac80211] [<ffffffffc069cc30>] ath9k_p2p_ps_timer+0x170/0x190 [ath9k] [<ffffffffc070adf8>] ath_gen_timer_isr+0xc8/0xf0 [ath9k_hw] [<ffffffffc0691156>] ath9k_tasklet+0x296/0x2f0 [ath9k] [<ffffffff8107ad65>] tasklet_action+0xe5/0xf0 [...] Cc: stable@vger.kernel.org [3.16+, due to d463af4a1c34 using it] Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: remove PM-QoS listenerJohannes Berg2015-10-141-1/+1
| | | | | | | | | | As this API has never really seen any use and most drivers don't ever use the value derived from it, remove it. Change the only driver using it (rt2x00) to simply use the DTIM period instead of the "max sleep" time. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Do not restart scheduled scan if multiple scan plans are setAvraham Stern2015-10-131-2/+6
| | | | | | | | | | | | If multiple scan plans were set for scheduled scan, do not restart scheduled scan on reconfig because it is possible that some scan plans were already completed and there is no need to run them all over again. Instead, notify userspace that scheduled scan stopped so it can configure new scan plans for scheduled scan. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add missing struct ieee80211_txq tid field initializationFelix Fietkau2015-10-081-0/+2
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: use bool argument to ieee80211_send_nullfuncJohannes Berg2015-09-291-1/+1
| | | | | | | Instead of int with 0/1, use bool with false/true for the powersave argument to ieee80211_send_nullfunc(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: don't tear down aggregation on suspend in case of wowlan->anyEliad Peller2015-09-291-2/+3
| | | | | | | | | | | | | | | | | In case of "any" wowlan trigger, there is no reason to tear down aggregations, as we want the device to continue working normally. Similarly, there's no reason to tear down aggregations on resume, as they should have been torn down on suspend if needed. However, since the reconfiguration flow is shared with HW restart, tear down aggregations on reconfiguration when we are not resuming. To keep things working after non-wowlan suspend, keep clearing the WLAN_STA_BLOCK_BA flag. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: use DECLARE_EWMA for ave_beacon_signalJohannes Berg2015-09-221-1/+1
| | | | | | | | | | | | It doesn't seem problematic to change the weight for the average beacon signal from 3 to 4, so use DECLARE_EWMA. This also makes the code easier to maintain since bugs like the one fixed in the previous patch can't happen as easily. With a fix from Avraham Stern to invert the sign since EMWA uses unsigned values only. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: zero center freq segment 2 in VHT oper IEChun-Yeow Yeoh2015-09-221-0/+2
| | | | | | | | | | Clear the Channel Center Frequency Segment 2 in VHT operation IEs to avoid sending non-zero values if the SKB wasn't zeroed before adding the VHT operation IE. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [change commit message a bit - not necessarily just mesh related] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: clear local->suspended before calling drv_resume()Eliad Peller2015-07-171-4/+14
| | | | | | | | | | | | | | | | | | | | | | Currently, mac80211 calls drv_resume() on wowlan resume, but drops any incoming frame until local->suspended is cleared later on. This requires the low-level driver to support a new state, in which it is expected to fully work (as it was resumed) but not passing rx frames yet (as they will be dropped). iwlwifi (and probably other drivers as well) has issues supporting such mode. Since in the wowlan case we already short-circuit ieee80211_reconfig, there's nothing that prevents us from clearing local->suspend before calling drv_resume(), and letting the low-level driver work normally. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: clear local->in_reconfig on reconfig errorEliad Peller2015-07-171-0/+1
| | | | | | | | | | If reconfiguration fails, local->in_reconfig is never cleaned, resulting in rx frames being dropped next time the device is started. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: allow passing NULL to ieee80211_vif_to_wdev()Johannes Berg2015-07-171-1/+6
| | | | | | | | Simply return NULL in this case, instead of crashing. This can simplify callers that would otherwise have to check for this explicitly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: move ieee80211_get_bssid into RX fileJohannes Berg2015-07-171-49/+0
| | | | | | | | | | This function is only used in the RX code, so moving it into that file gives the compiler better optimisation possibilities and also allows us to remove the check for short frames (which in the RX path cannot happen, but as a generic utility needed to be checked.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: convert HW flags to unsigned long bitmapJohannes Berg2015-06-101-3/+3
| | | | | | | | | | | | | | | As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix AP_VLAN crypto tailroom calculationMichal Kazior2015-05-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some splats I was seeing: (a) WARNING: CPU: 1 PID: 0 at /devel/src/linux/net/mac80211/wep.c:102 ieee80211_wep_add_iv (b) WARNING: CPU: 1 PID: 0 at /devel/src/linux/net/mac80211/wpa.c:73 ieee80211_tx_h_michael_mic_add (c) WARNING: CPU: 3 PID: 0 at /devel/src/linux/net/mac80211/wpa.c:433 ieee80211_crypto_ccmp_encrypt I've seen (a) and (b) with ath9k hw crypto and (c) with ath9k sw crypto. All of them were related to insufficient skb tailroom and I was able to trigger these with ping6 program. AP_VLANs may inherit crypto keys from parent AP. This wasn't considered and yielded problems in some setups resulting in inability to transmit data because mac80211 wouldn't resize skbs when necessary and subsequently drop some packets due to insufficient tailroom. For efficiency purposes don't inspect both AP_VLAN and AP sdata looking for tailroom counter. Instead update AP_VLAN tailroom counters whenever their master AP tailroom counter changes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: move IE split utilities here from mac80211Johannes Berg2015-04-071-40/+0
| | | | | | | As the next patch will require the IE splitting utility functions in cfg80211, move them there from mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add an intermediate software queue implementationFelix Fietkau2015-04-011-0/+22
| | | | | | | | | | | | | | | | | | This allows drivers to request per-vif and per-sta-tid queues from which they can pull frames. This makes it easier to keep the hardware queues short, and to improve fairness between clients and vifs. The task of scheduling packet transmission is left up to the driver - queueing is controlled by mac80211. Drivers can only dequeue packets by calling ieee80211_tx_dequeue. This makes it possible to add active queue management later without changing drivers using this code. This can also be used as a starting point to implement A-MSDU aggregation in a way that does not add artificially induced latency. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [resolved minor context conflict, minor changes, endian annotations] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'mac80211-next-for-davem-2015-03-30' of ↵David S. Miller2015-03-311-14/+114
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Lots of updates for net-next; along with the usual flurry of small fixes, cleanups and internal features we have: * VHT support for TDLS and IBSS (conditional on drivers though) * first TX performance improvements (the biggest will come later) * many suspend/resume (race) fixes * name_assign_type support from Tom Gundersen ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211: add VHT support for IBSSJanusz.Dziedzic@tieto.com2015-03-301-0/+33
| | | | | | | | | | | | | | | | | | Add VHT support for IBSS. Drivers could activate this feature by setting NL80211_EXT_FEATURE_VHT_IBSS flag. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: allow to get wireless_dev structure from ieee80211_vifEmmanuel Grumbach2015-03-161-0/+12
| | | | | | | | | | | | | | | | This will allow mac80211 drivers to call cfg80211 APIs with the right handle. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: allow iterating inactive interfacesArik Nemtsov2015-03-041-13/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes the driver might want to modify private data in interfaces that are down. One possible use-case is cleaning up interface state after HW recovery. Some interfaces that were up before the recovery took place might be down now, but they might still be "dirty". Introduce a new iterate_interfaces() API and a new ACTIVE iterator flag. This way the internal implementation of the both active and inactive APIs remains the same. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: handle drv_add_interface failures properly during reconfigLuciano Coelho2015-03-031-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | If any interface fails to be added to the driver in during reconfig, we should remove all the successfully added interfaces and report reconfig failure, so things can be cleaned up properly. Failing to do so can lead to subsequent failures and leave the drivers in a messed up state. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: TDLS: support VHT between peersArik Nemtsov2015-03-031-0/+35
| | | | | | | | | | | | | | | | | | Add the AID and VHT-cap/operation IEs during TDLS setup. Remove the block of TDLS peers when setting HT-caps of the peer station. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: count interfaces correctly for combination checksAndrei Otcheretianski2015-03-161-1/+1
|/ | | | | | | | | | | | | | | | | | Since moving the interface combination checks to mac80211, it's broken because it now only considers interfaces with an assigned channel context, so for example any interface that isn't active can still be up, which is clearly an issue; also, in particular P2P-Device wdevs are an issue since they never have a chanctx. Fix this by counting running interfaces instead the ones with a channel context assigned. Cc: stable@vger.kernel.org [3.16+] Fixes: 73de86a38962b ("cfg80211/mac80211: move interface counting for combination check to mac80211") Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [rewrite commit message, dig out the commit it fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: handle potential race between suspend and scan completionLuciano Coelho2015-01-271-0/+12
| | | | | | | | | | | | | | If suspend starts while ieee80211_scan_completed() is running, between the point where SCAN_COMPLETED is set and the work is queued, ieee80211_scan_cancel() will not catch the work and we may finish suspending before the work is actually executed, leaving the scan running while suspended. To fix this race, queue the scan work during resume if the SCAN_COMPLETED flag is set and flush it immediately. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: avoid races related to suspend flowEmmanuel Grumbach2015-01-231-6/+9
| | | | | | | | | | | | | | | | | | | | | When we go to suspend, there is complex set of states that avoids races. The quiescing variable is set whlie __ieee80211_suspend is running. Then suspended is set. The code makes sure there is no window without any of these flags. The problem is that workers can still be enqueued while we are quiescing. This leads to situations where the driver is already suspending and other flows like disassociation are handled by a worker. To fix this, we need to check quiescing and suspended flags in the worker itself and not only before enqueueing it. I also add here extensive documentation to ease the understanding of these complex issues. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: change bandwidth reporting to explicit fieldJohannes Berg2015-01-151-8/+17
| | | | | | | | | | | | | | | | | | For some reason, we made the bandwidth separate flags, which is rather confusing - a single rate cannot have different bandwidths at the same time. Change this to no longer be flags but use a separate field for the bandwidth ('bw') instead. While at it, add support for 5 and 10 MHz rates - these are reported as regular legacy rates with their real bitrate, but tagged as 5/10 now to make it easier to distinguish them. In the nl80211 API, the flags are preserved, but the code now can also clearly only set a single one of the flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: remove 80+80 MHz rate reportingJohannes Berg2015-01-151-2/+0
| | | | | | | | | These rates are treated the same as 160 MHz in the spec, so it makes no sense to distinguish them. As no driver uses them yet, this is also not a problem, just remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 12:21:29 +0100