summaryrefslogtreecommitdiffstats
path: root/net/mac80211 (follow)
Commit message (Collapse)AuthorAgeFilesLines
* wifi: mac80211: Set TWT Information Frame Disabled bit as 1Howard Hsu2022-11-021-0/+3
| | | | | | | | | | | The TWT Information Frame Disabled bit of control field of TWT Setup frame shall be set to 1 since handling TWT Information frame is not supported by current mac80211 implementation. Fixes: f5a4c24e689f ("mac80211: introduce individual TWT support in AP mode") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Link: https://lore.kernel.org/r/20221027015653.1448-1-howard-yh.hsu@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: mac80211: Fix ack frame idr leak when mesh has no routeNicolas Cavallari2022-11-021-1/+1
| | | | | | | | | | | | | | | When trying to transmit an data frame with tx_status to a destination that have no route in the mesh, then it is dropped without recrediting the ack_status_frames idr. Once it is exhausted, wpa_supplicant starts failing to do SAE with NL80211_CMD_FRAME and logs "nl80211: Frame command failed". Use ieee80211_free_txskb() instead of kfree_skb() to fix it. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20221027140133.1504-1-nicolas.cavallari@green-communications.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit()Zhengchao Shao2022-11-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: <TASK> dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Fixes: f856373e2f31 ("wifi: mac80211: do not wake queues on a vif that is being stopped") Reported-by: syzbot+c6e8fca81c294fd5620a@syzkaller.appspotmail.com Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221026063959.177813-1-shaozhengchao@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: mac80211: fix memory free error when registering wiphy failtaozhang2022-10-211-2/+6
| | | | | | | | | | | ieee80211_register_hw free the allocated cipher suites when registering wiphy fail, and ieee80211_free_hw will re-free it. set wiphy_ciphers_allocated to false after freeing allocated cipher suites. Signed-off-by: taozhang <taozhang@bestechnic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds2022-10-172-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
| * treewide: use get_random_bytes() when possibleJason A. Donenfeld2022-10-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld2022-10-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* | Merge branch 'cve-fixes-2022-10-13'Johannes Berg2022-10-133-20/+32
|\ \ | | | | | | | | | | | | Pull in the fixes for various scan parsing bugs found by Sönke Huster by fuzzing.
| * | wifi: mac80211: fix crash in beacon protection for P2P-deviceJohannes Berg2022-10-101-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If beacon protection is active but the beacon cannot be decrypted or is otherwise malformed, we call the cfg80211 API to report this to userspace, but that uses a netdev pointer, which isn't present for P2P-Device. Fix this to call it only conditionally to ensure cfg80211 won't crash in the case of P2P-Device. This fixes CVE-2022-42722. Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 9eaf183af741 ("mac80211: Report beacon protection failures to user space") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: mac80211: fix MBSSID parsing use-after-freeJohannes Berg2022-10-102-15/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we parse a multi-BSSID element, we might point some element pointers into the allocated nontransmitted_profile. However, we free this before returning, causing UAF when the relevant pointers in the parsed elements are accessed. Fix this by not allocating the scratch buffer separately but as part of the returned structure instead, that way, there are no lifetime issues with it. The scratch buffer introduction as part of the returned data here is taken from MLO feature work done by Ilan. This fixes CVE-2022-42719. Fixes: 5023b14cf4df ("mac80211: support profile split between elements") Co-developed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: cfg80211/mac80211: reject bad MBSSID elementsJohannes Berg2022-10-101-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per spec, the maximum value for the MaxBSSID ('n') indicator is 8, and the minimum is 1 since a multiple BSSID set with just one BSSID doesn't make sense (the # of BSSIDs is limited by 2^n). Limit this in the parsing in both cfg80211 and mac80211, rejecting any elements with an invalid value. This fixes potentially bad shifts in the processing of these inside the cfg80211_gen_new_bssid() function later. I found this during the investigation of CVE-2022-41674 fixed by the previous patch. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Fixes: 78ac51f81532 ("mac80211: support multi-bssid") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: mac80211: netdev compatible TX stop for iTXQ driversAlexander Wetzel2022-10-072-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Properly handle TX stop for internal queues (iTXQs) within mac80211. mac80211 must not stop netdev queues when using mac80211 iTXQs. For these drivers the netdev interface is created with IFF_NO_QUEUE. While netdev still drops frames for IFF_NO_QUEUE interfaces when we stop the netdev queues, it also prints a warning when this happens: Assuming the mac80211 interface is called wlan0 we would get "Virtual device wlan0 asks to queue packet!" when netdev has to drop a frame. This patch is keeping the harmless netdev queue starts for iTXQ drivers. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: mac80211: fix decap offload for stations on AP_VLAN interfacesFelix Fietkau2022-10-071-3/+4
| | | | | | | | | | | | | | | | | | | | Since AP_VLAN interfaces are not passed to the driver, check offload_flags on the bss vif instead. Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com> Fixes: 80a915ec4427 ("mac80211: add rx decapsulation offload support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: mac80211: unlock on error in ieee80211_can_powered_addr_change()Dan Carpenter2022-10-071-1/+1
| | | | | | | | | | | | | | | | Unlock before returning -EOPNOTSUPP. Fixes: 3c06e91b40db ("wifi: mac80211: Support POWERED_ADDR_CHANGE feature") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: mac80211: remove/avoid misleading printsJames Prestwood2022-10-071-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At some point a few kernel debug prints started appearing which indicated something was sending invalid IEs: "bad VHT capabilities, disabling VHT" "Invalid HE elem, Disable HE" Turns out these were being printed because the local hardware supported HE/VHT but the peer/AP did not. Bad/invalid indicates, to me at least, that the IE is in some way malformed, not missing. For the HE print (ieee80211_verify_peer_he_mcs_support) it will now silently fail if the HE capability element is missing (still prints if the element size is wrong). For the VHT print, it has been removed completely and will silently set the DISABLE_VHT flag which is consistent with how DISABLE_HT is set. Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: mac80211: fix probe req HE capabilities accessJames Prestwood2022-10-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When building the probe request IEs HE support is checked for the 6GHz band (wiphy->bands[NL80211_BAND_6GHZ]). If supported the HE capability IE should be included according to the spec. The problem is the 16-bit capability is obtained from the band object (sband) that was passed in, not the 6GHz band object (sband6). If the sband object doesn't support HE it will result in a warning. Fixes: 7d29bc50b30e ("mac80211: always include HE 6GHz capability in probe request") Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rxFelix Fietkau2022-10-071-1/+1
|/ | | | | | | | | | | Since STP TCN frames are only 7 bytes, the pskb_may_pull call returns an error. Instead of dropping those packets, bump them back to the slow path for proper processing. Fixes: 49ddf8e6e234 ("mac80211: add fast-rx path") Reported-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'wireless-next-2022-09-30' of ↵Jakub Kicinski2022-09-3019-288/+766
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * wifi: mac80211: implement link switchingJohannes Berg2022-09-066-0/+250
| | | | | | | | | | | | | | | | | | | | | | Implement an API function and debugfs file to switch active links. Also provide an async version of the API so drivers can call it in arbitrary contexts, e.g. while in the authorized callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: mac80211: keep A-MSDU data in sta and per-linkBenjamin Berg2022-09-067-16/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The A-MSDU data needs to be stored per-link and aggregated into a single value for the station. Add a new struct ieee_80211_sta_aggregates in order to store this data and a new function ieee80211_sta_recalc_aggregates to update the current data for the STA. Note that in the non MLO case the pointer in ieee80211_sta will directly reference the data in deflink.agg, which means that recalculation may be skipped in that case. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: mac80211: set up beacon timing config on linksJohannes Berg2022-09-061-36/+47
| | | | | | | | | | | | | | On secondary MLO links, I forgot to set the beacon interval and DTIM period, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: mac80211: add vif/sta link RCU dereference macrosJohannes Berg2022-09-061-0/+10
| | | | | | | | | | | | | | | | Add macros (and an exported function) to allow checking some link RCU protected accesses that are happening in callbacks from mac80211 and are thus under the correct lock. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: mac80211: extend ieee80211_nullfunc_get() for MLOJohannes Berg2022-09-062-17/+31
| | | | | | | | | | | | | | Add a link_id parameter to ieee80211_nullfunc_get() to be able to obtain a correctly addressed frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: mac80211: add ieee80211_find_sta_by_link_addrs APIJohannes Berg2022-09-061-0/+37
| | | | | | | | | | | | | | | | | | | | | | Add a new API function ieee80211_find_sta_by_link_addrs() that looks up the STA and link ID based on interface and station link addresses. We're going to use it for mac80211-hwsim to track on the AP side which links are active. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: mac80211: isolate driver from inactive linksJohannes Berg2022-09-067-174/+270
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to let the driver select active links and properly make multi-link connections, as a first step isolate the driver from inactive links, and set the active links to be only the association link for client-side interfaces. For AP side nothing changes since APs always have to have all their links active. To simplify things, update the for_each_sta_active_link() API to include the appropriate vif pointer. This also implies not allocating a chanctx for an inactive link, which requires a few more changes. Since we now no longer try to program multiple links to the driver, remove the check in the MLME code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: mac80211: make smps_mode per-linkBenjamin Berg2022-09-065-11/+13
| | | | | | | | | | | | | | | | The SMPS power save mode needs to be per-link rather than being shared for all links. As such, move it into struct ieee80211_link_sta. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: mac80211: use correct rx link_sta instead of defaultBenjamin Berg2022-09-061-34/+35
| | | | | | | | | | | | | | Use rx->link_sta everywhere instead of accessing the default link. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: mac80211: set link_sta in reorder timeoutJohannes Berg2022-09-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | Now that we have a link_sta pointer in the rx struct we also need to fill it in all the cases. It didn't matter so much until now as we weren't using it, but the code should really be able to assume that if the rx.sta is set, so is rx.link_sta. Fixes: ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * Merge remote-tracking branch 'wireless/main' into wireless-nextJohannes Berg2022-09-063-8/+12
| |\ | | | | | | | | | | | | | | | | | | Merge wireless/main to get the rx.link fix, which is needed for further work in this area. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | net-next: skbuff: refactor pskb_pullRichard Gobert2022-09-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pskb_may_pull already contains all of the checks performed by pskb_pull. Use pskb_may_pull for validation in pskb_pull, eliminating the duplication and making __pskb_pull obsolete. Replace __pskb_pull with pskb_pull where applicable. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-09-295-8/+17
|\ \ \ | | | | | | | | | | | | | | | | | | | | No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * \ \ Merge tag 'wireless-2022-09-27' of ↵Jakub Kicinski2022-09-285-8/+17
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== A few late-comer fixes: * locking in mac80211 MLME * non-QoS driver crash/regression * minstrel memory corruption * TX deadlock * TX queues not always enabled * HE/EHT bitrate calculation * tag 'wireless-2022-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: mlme: Fix double unlock on assoc success handling wifi: mac80211: mlme: Fix missing unlock on beacon RX wifi: mac80211: fix memory corruption in minstrel_ht_update_rates() wifi: mac80211: fix regression with non-QoS drivers wifi: mac80211: ensure vif queues are operational after start wifi: mac80211: don't start TX with fq->lock to fix deadlock wifi: cfg80211: fix MCS divisor value ==================== Link: https://lore.kernel.org/r/20220927135923.45312-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| | * | | wifi: mac80211: mlme: Fix double unlock on assoc success handlingRafael Mendonca2022-09-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6911458dc428 ("wifi: mac80211: mlme: refactor assoc success handling") moved the per-link setup out of ieee80211_assoc_success() into a new function ieee80211_assoc_config_link() but missed to remove the unlock of 'sta_mtx' in case of HE capability/operation missing on HE AP, which leads to a double unlock: ieee80211_assoc_success() { ... ieee80211_assoc_config_link() { ... if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) && (!elems->he_cap || !elems->he_operation)) { mutex_unlock(&sdata->local->sta_mtx); ... } ... } ... mutex_unlock(&sdata->local->sta_mtx); ... } Fixes: 6911458dc428 ("wifi: mac80211: mlme: refactor assoc success handling") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Link: https://lore.kernel.org/r/20220925143420.784975-1-rafaelmendsr@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | | wifi: mac80211: mlme: Fix missing unlock on beacon RXRafael Mendonca2022-09-271-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 98b0b467466c ("wifi: mac80211: mlme: use correct link_sta") switched to link station instead of deflink and added some checks to do that, which are done with the 'sta_mtx' mutex held. However, the error path of these checks does not unlock 'sta_mtx' before returning. Fixes: 98b0b467466c ("wifi: mac80211: mlme: use correct link_sta") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Link: https://lore.kernel.org/r/20220924184042.778676-1-rafaelmendsr@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | | wifi: mac80211: fix memory corruption in minstrel_ht_update_rates()Paweł Lenkow2022-09-271-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During our testing of WFM200 module over SDIO on i.MX6Q-based platform, we discovered a memory corruption on the system, tracing back to the wfx driver. Using kfence, it was possible to trace it back to the root cause, which is hw->max_rates set to 8 in wfx_init_common, while the maximum defined by IEEE80211_TX_TABLE_SIZE is 4. This causes array out-of-bounds writes during updates of the rate table, as seen below: BUG: KFENCE: memory corruption in kfree_rcu_work+0x320/0x36c Corrupted memory at 0xe0a4ffe0 [ 0x03 0x03 0x03 0x03 0x01 0x00 0x00 0x02 0x02 0x02 0x09 0x00 0x21 0xbb 0xbb 0xbb ] (in kfence-#81): kfree_rcu_work+0x320/0x36c process_one_work+0x3ec/0x920 worker_thread+0x60/0x7a4 kthread+0x174/0x1b4 ret_from_fork+0x14/0x2c 0x0 kfence-#81: 0xe0a4ffc0-0xe0a4ffdf, size=32, cache=kmalloc-64 allocated by task 297 on cpu 0 at 631.039555s: minstrel_ht_update_rates+0x38/0x2b0 [mac80211] rate_control_tx_status+0xb4/0x148 [mac80211] ieee80211_tx_status_ext+0x364/0x1030 [mac80211] ieee80211_tx_status+0xe0/0x118 [mac80211] ieee80211_tasklet_handler+0xb0/0xe0 [mac80211] tasklet_action_common.constprop.0+0x11c/0x148 __do_softirq+0x1a4/0x61c irq_exit+0xcc/0x104 call_with_stack+0x18/0x20 __irq_svc+0x80/0xb0 wq_worker_sleeping+0x10/0x100 wq_worker_sleeping+0x10/0x100 schedule+0x50/0xe0 schedule_timeout+0x2e0/0x474 wait_for_completion+0xdc/0x1ec mmc_wait_for_req_done+0xc4/0xf8 mmc_io_rw_extended+0x3b4/0x4ec sdio_io_rw_ext_helper+0x290/0x384 sdio_memcpy_toio+0x30/0x38 wfx_sdio_copy_to_io+0x88/0x108 [wfx] wfx_data_write+0x88/0x1f0 [wfx] bh_work+0x1c8/0xcc0 [wfx] process_one_work+0x3ec/0x920 worker_thread+0x60/0x7a4 kthread+0x174/0x1b4 ret_from_fork+0x14/0x2c 0x0 After discussion on the wireless mailing list it was clarified that the issue has been introduced by: commit ee0e16ab756a ("mac80211: minstrel_ht: fill all requested rates") and fix shall be in minstrel_ht_update_rates in rc80211_minstrel_ht.c. Fixes: ee0e16ab756a ("mac80211: minstrel_ht: fill all requested rates") Link: https://lore.kernel.org/all/12e5adcd-8aed-f0f7-70cc-4fb7b656b829@camlingroup.com/ Link: https://lore.kernel.org/linux-wireless/20220915131445.30600-1-lech.perczak@camlingroup.com/ Cc: Jérôme Pouiller <jerome.pouiller@silabs.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Seiderer <ps.report@gmx.net> Cc: Kalle Valo <kvalo@kernel.org> Cc: Krzysztof Drobiński <krzysztof.drobinski@camlingroup.com>, Signed-off-by: Paweł Lenkow <pawel.lenkow@camlingroup.com> Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com> Reviewed-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | | wifi: mac80211: fix regression with non-QoS driversHans de Goede2022-09-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 10cb8e617560 ("mac80211: enable QoS support for nl80211 ctrl port") changed ieee80211_tx_control_port() to aways call __ieee80211_select_queue() without checking local->hw.queues. __ieee80211_select_queue() returns a queue-id between 0 and 3, which means that now ieee80211_tx_control_port() may end up setting the queue-mapping for a skb to a value higher then local->hw.queues if local->hw.queues is less then 4. Specifically this is a problem for ralink rt2500-pci cards where local->hw.queues is 2. There this causes rt2x00queue_get_tx_queue() to return NULL and the following error to be logged: "ieee80211 phy0: rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2", after which association with the AP fails. Other callers of __ieee80211_select_queue() skip calling it when local->hw.queues < IEEE80211_NUM_ACS, add the same check to ieee80211_tx_control_port(). This fixes ralink rt2500-pci and similar cards when less then 4 tx-queues no longer working. Fixes: 10cb8e617560 ("mac80211: enable QoS support for nl80211 ctrl port") Cc: Markus Theil <markus.theil@tu-ilmenau.de> Suggested-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220918192052.443529-1-hdegoede@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | | wifi: mac80211: ensure vif queues are operational after startAlexander Wetzel2022-09-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure local->queue_stop_reasons and vif.txqs_stopped stay in sync. When a new vif is created the queues may end up in an inconsistent state and be inoperable: Communication not using iTXQ will work, allowing to e.g. complete the association. But the 4-way handshake will time out. The sta will not send out any skbs queued in iTXQs. All normal attempts to start the queues will fail when reaching this state. local->queue_stop_reasons will have marked all queues as operational but vif.txqs_stopped will still be set, creating an inconsistent internal state. In reality this seems to be race between the mac80211 function ieee80211_do_open() setting SDATA_STATE_RUNNING and the wake_txqs_tasklet: Depending on the driver and the timing the queues may end up to be operational or not. Cc: stable@vger.kernel.org Fixes: f856373e2f31 ("wifi: mac80211: do not wake queues on a vif that is being stopped") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Acked-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220915130946.302803-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | | wifi: mac80211: don't start TX with fq->lock to fix deadlockAlexander Wetzel2022-09-271-1/+1
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ieee80211_txq_purge() calls fq_tin_reset() and ieee80211_purge_tx_queue(); Both are then calling ieee80211_free_txskb(). Which can decide to TX the skb again. There are at least two ways to get a deadlock: 1) When we have a TDLS teardown packet queued in either tin or frags ieee80211_tdls_td_tx_handle() will call ieee80211_subif_start_xmit() while we still hold fq->lock. ieee80211_txq_enqueue() will thus deadlock. 2) A variant of the above happens if aggregation is up and running: In that case ieee80211_iface_work() will deadlock with the original task: The original tasks already holds fq->lock and tries to get sta->lock after kicking off ieee80211_iface_work(). But the worker can get sta->lock prior to the original task and will then spin for fq->lock. Avoid these deadlocks by not sending out any skbs when called via ieee80211_free_txskb(). Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20220915124120.301918-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni2022-09-083-8/+12
|\| | | | |_|/ |/| | | | | | | | | | | | | | | | | drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
| * | Merge tag 'wireless-2022-09-03' of ↵David S. Miller2022-09-043-8/+12
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes berg says: ==================== We have a handful of fixes: - fix DMA from stack in wilc1000 driver - fix crash on chip reset failure in mt7921e - fix for the reported warning on aggregation timer expiry - check packet lengths in hwsim virtio paths - fix compiler warnings/errors with AAD construction by using struct_group - fix Intel 4965 driver rate scale operation - release channel contexts correctly in mac80211 mlme code ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * wifi: use struct_group to copy addressesJohannes Berg2022-09-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | We sometimes copy all the addresses from the 802.11 header for the AAD, which may cause complaints from fortify checks. Use struct_group() to avoid the compiler warnings/errors. Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * wifi: mac80211: fix locking in auth/assoc timeoutJohannes Berg2022-09-031-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we hit an authentication or association timeout, we only release the chanctx for the deflink, and the other link(s) are released later by ieee80211_vif_set_links(), but we're not locking this correctly. Fix the locking here while releasing the channels and links. Change-Id: I9e08c1a5434592bdc75253c1abfa6c788f9f39b1 Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * wifi: mac80211: mlme: release deflink channel in error caseJohannes Berg2022-09-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | In the prep_channel error case we didn't release the deflink channel leaving it to be left around. Fix that. Change-Id: If0dfd748125ec46a31fc6045a480dc28e03723d2 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * wifi: mac80211: fix link warning in RX agg timer expiryMukesh Sisodiya2022-09-031-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rx data link pointer isn't set from the RX aggregation timer, resulting in a later warning. Fix that by setting it to the first valid link for now, with a FIXME to worry about statistics later, it's not very important since it's just the timeout case. Reported-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/498d714c-76be-9d04-26db-a1206878de5e@redhat.com Fixes: 56057da4569b ("wifi: mac80211: rx: track link in RX data") Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | Merge tag 'wireless-next-2022-09-03' of ↵David S. Miller2022-09-0410-296/+412
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== drivers - rtw89: large update across the map, e.g. coex, pci(e), etc. - ath9k: uninit memory read fix - ath10k: small peer map fix and a WCN3990 device fix - wfx: underflow stack - the "change MAC address while IFF_UP" change from James we discussed - more MLO work, including a set of fixes for the previous code, now that we have more code we can exercise it more - prevent some features with MLO that aren't ready yet (AP_VLAN and 4-address connections) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | wifi: mac80211: call drv_sta_state() under sdata_lock() in reconfigJohannes Berg2022-09-031-15/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, other paths calling drv_sta_state() hold the mutex and therefore drivers can assume that, and look at links with that protection. Fix that for the reconfig path as well; to do it more easily use ieee80211_reconfig_stations() for the AP/AP_VLAN station reconfig as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | wifi: mac80211: mlme: refactor QoS settings codeJohannes Berg2022-09-032-13/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor the code to apply QoS settings to the driver so we can call it on link switch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | wifi: mac80211: fix double SW scan stopJohannes Berg2022-09-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we stop a not-yet-started scan, we erroneously call into the driver, causing a sequence of sw_scan_start() followed by sw_scan_complete() twice. This will cause a warning in hwsim with next in line commit that validates the address passed to wmediumd/virtio. Fix this by doing the calls only if we were actually scanning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | wifi: mac80211: mlme: assign link address correctlyJohannes Berg2022-09-031-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now, we assign the link address only after we add the link to the driver, which is quite obviously wrong. It happens to work in many cases because it gets updated immediately, and then link_conf updates may update it, but it's clearly not really right. Set the link address during ieee80211_mgd_setup_link() so it's set before telling the driver about the link. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | wifi: mac80211: move link code to a new fileJohannes Berg2022-09-034-254/+274
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We probably should've done that originally, we already have about 300 lines of code there, and will add more. Move all the link code we wrote to a new file. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 04:28:37 +0100