summaryrefslogtreecommitdiffstats
path: root/net/netlabel (follow)
Commit message (Collapse)AuthorAgeFilesLines
* netlabel: Reorder fields in 'struct netlbl_domaddr6_map'Christophe JAILLET2023-06-211-1/+1
| | | | | | | | | | | | | | | Group some variables based on their sizes to reduce hole and avoid padding. On x86_64, this shrinks the size of 'struct netlbl_domaddr6_map' from 72 to 64 bytes. It saves a few bytes of memory and is more cache-line friendly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/aa109847260e51e174c823b6d1441f75be370f01.1687083361.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* netlabel: fix shift wrapping bug in netlbl_catmap_setlong()Dmitry Mastykin2023-06-101-1/+2
| | | | | | | | | | There is a shift wrapping bug in this code on 32-bit architectures. NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long. Every second 32-bit word of catmap becomes corrupted. Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* genetlink: start to validate reserved header bytesJakub Kicinski2022-08-294-0/+4
| | | | | | | | | | | | | | | | | We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: fix typo in commentTopi Miettinen2022-08-101-1/+1
| | | | | | | | 'IPv4 and IPv4' should be 'IPv4 and IPv6'. Signed-off-by: Topi Miettinen <toiwoton@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: fix out-of-bounds memory accessesWang Yufen2022-03-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In calipso_map_cat_ntoh(), in the for loop, if the return value of netlbl_bitmap_walk() is equal to (net_clen_bits - 1), when netlbl_bitmap_walk() is called next time, out-of-bounds memory accesses of bitmap[byte_offset] occurs. The bug was found during fuzzing. The following is the fuzzing report BUG: KASAN: slab-out-of-bounds in netlbl_bitmap_walk+0x3c/0xd0 Read of size 1 at addr ffffff8107bf6f70 by task err_OH/252 CPU: 7 PID: 252 Comm: err_OH Not tainted 5.17.0-rc7+ #17 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x21c/0x230 show_stack+0x1c/0x60 dump_stack_lvl+0x64/0x7c print_address_description.constprop.0+0x70/0x2d0 __kasan_report+0x158/0x16c kasan_report+0x74/0x120 __asan_load1+0x80/0xa0 netlbl_bitmap_walk+0x3c/0xd0 calipso_opt_getattr+0x1a8/0x230 calipso_sock_getattr+0x218/0x340 calipso_sock_getattr+0x44/0x60 netlbl_sock_getattr+0x44/0x80 selinux_netlbl_socket_setsockopt+0x138/0x170 selinux_socket_setsockopt+0x4c/0x60 security_socket_setsockopt+0x4c/0x90 __sys_setsockopt+0xbc/0x2b0 __arm64_sys_setsockopt+0x6c/0x84 invoke_syscall+0x64/0x190 el0_svc_common.constprop.0+0x88/0x200 do_el0_svc+0x88/0xa0 el0_svc+0x128/0x1b0 el0t_64_sync_handler+0x9c/0x120 el0t_64_sync+0x16c/0x170 Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Yufen <wangyufen@huawei.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* lsm: security_task_getsecid_subj() -> security_current_getsecid_subj()Paul Moore2021-11-222-2/+2
| | | | | | | | | | | | | | | The security_task_getsecid_subj() LSM hook invites misuse by allowing callers to specify a task even though the hook is only safe when the current task is referenced. Fix this by removing the task_struct argument to the hook, requiring LSM implementations to use the current task. While we are changing the hook declaration we also rename the function to security_current_getsecid_subj() in an effort to reinforce that the hook captures the subjective credentials of the current task and not an arbitrary task on the system. Reviewed-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* net: fix NULL pointer reference in cipso_v4_doi_free王贇2021-08-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc failed, we sometime observe panic: BUG: kernel NULL pointer dereference, address: ... RIP: 0010:cipso_v4_doi_free+0x3a/0x80 ... Call Trace: netlbl_cipsov4_add_std+0xf4/0x8c0 netlbl_cipsov4_add+0x13f/0x1b0 genl_family_rcv_msg_doit.isra.15+0x132/0x170 genl_rcv_msg+0x125/0x240 This is because in cipso_v4_doi_free() there is no check on 'doi_def->map.std' when doi_def->type got value 1, which is possibe, since netlbl_cipsov4_add_std() haven't initialize it before alloc 'doi_def->map.std'. This patch just add the check to prevent panic happen in similar cases. Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove redundant if statementsYajun Deng2021-08-051-4/+2
| | | | | | | | The 'if (dev)' statement already move into dev_{put , hold}, so remove redundant if statements. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cipso: fix warnings in netlbl_cipsov4_add_stdPavel Skripkin2021-07-271-4/+4
| | | | | | | | | | | | | | | | | Syzbot reported warning in netlbl_cipsov4_add(). The problem was in too big doi_def->map.std->lvl.local_size passed to kcalloc(). Since this value comes from userpace there is no need to warn if value is not correct. The same problem may occur with other kcalloc() calls in this function, so, I've added __GFP_NOWARN flag to all kcalloc() calls there. Reported-and-tested-by: syzbot+cdd51ee2e6b0b2e18c0d@syzkaller.appspotmail.com Fixes: 96cb8e3313c7 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration") Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: Fix memory leak in netlbl_mgmt_add_commonLiu Shixin2021-06-151-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hulk Robot reported memory leak in netlbl_mgmt_add_common. The problem is non-freed map in case of netlbl_domhsh_add() failed. BUG: memory leak unreferenced object 0xffff888100ab7080 (size 96): comm "syz-executor537", pid 360, jiffies 4294862456 (age 22.678s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 ................ backtrace: [<0000000008b40026>] netlbl_mgmt_add_common.isra.0+0xb2a/0x1b40 [<000000003be10950>] netlbl_mgmt_add+0x271/0x3c0 [<00000000c70487ed>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 [<000000001f2ff614>] genl_rcv_msg+0x2bf/0x4f0 [<0000000089045792>] netlink_rcv_skb+0x134/0x3d0 [<0000000020e96fdd>] genl_rcv+0x24/0x40 [<0000000042810c66>] netlink_unicast+0x4a0/0x6a0 [<000000002e1659f0>] netlink_sendmsg+0x789/0xc70 [<000000006e43415f>] sock_sendmsg+0x139/0x170 [<00000000680a73d7>] ____sys_sendmsg+0x658/0x7d0 [<0000000065cbb8af>] ___sys_sendmsg+0xf8/0x170 [<0000000019932b6c>] __sys_sendmsg+0xd3/0x190 [<00000000643ac172>] do_syscall_64+0x37/0x90 [<000000009b79d6dc>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: Fix spelling mistakesZheng Yongjun2021-06-072-2/+2
| | | | | | | | | | Fix some spelling mistakes in comments: Interate ==> Iterate sucess ==> success Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: remove unused parameter in netlbl_netlink_auditinfo()Zheng Yejian2021-05-195-16/+14
| | | | | | | | | loginuid/sessionid/secid have been read from 'current' instead of struct netlink_skb_parms, the parameter 'skb' seems no longer needed. Fixes: c53fa1ed92cd ("netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'net-next-5.13' of ↵Linus Torvalds2021-04-291-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
| * netlabel: Correct function name netlbl_mgmt_add() in the kerneldoc commentsXiongfeng Wang2021-03-291-1/+1
| | | | | | | | | | | | | | | | | | | | Fix the following W=1 kernel build warning(s): net/netlabel/netlabel_mgmt.c:78: warning: expecting prototype for netlbl_mgmt_add(). Prototype was for netlbl_mgmt_add_common() instead Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'selinux-pr-20210426' of ↵Linus Torvalds2021-04-272-2/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: - Add support for measuring the SELinux state and policy capabilities using IMA. - A handful of SELinux/NFS patches to compare the SELinux state of one mount with a set of mount options. Olga goes into more detail in the patch descriptions, but this is important as it allows more flexibility when using NFS and SELinux context mounts. - Properly differentiate between the subjective and objective LSM credentials; including support for the SELinux and Smack. My clumsy attempt at a proper fix for AppArmor didn't quite pass muster so John is working on a proper AppArmor patch, in the meantime this set of patches shouldn't change the behavior of AppArmor in any way. This change explains the bulk of the diffstat beyond security/. - Fix a problem where we were not properly terminating the permission list for two SELinux object classes. * tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: add proper NULL termination to the secclass_map permissions smack: differentiate between subjective and objective task credentials selinux: clarify task subjective and objective credentials lsm: separate security_task_getsecid() into subjective and objective variants nfs: account for selinux security context when deciding to share superblock nfs: remove unneeded null check in nfs_fill_super() lsm,selinux: add new hook to compare new mount to an existing mount selinux: fix misspellings using codespell tool selinux: fix misspellings using codespell tool selinux: measure state and policy capabilities selinux: Allow context mounts for unpriviliged overlayfs
| * lsm: separate security_task_getsecid() into subjective and objective variantsPaul Moore2021-03-222-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Of the three LSMs that implement the security_task_getsecid() LSM hook, all three LSMs provide the task's objective security credentials. This turns out to be unfortunate as most of the hook's callers seem to expect the task's subjective credentials, although a small handful of callers do correctly expect the objective credentials. This patch is the first step towards fixing the problem: it splits the existing security_task_getsecid() hook into two variants, one for the subjective creds, one for the objective creds. void security_task_getsecid_subj(struct task_struct *p, u32 *secid); void security_task_getsecid_obj(struct task_struct *p, u32 *secid); While this patch does fix all of the callers to use the correct variant, in order to keep this patch focused on the callers and to ease review, the LSMs continue to use the same implementation for both hooks. The net effect is that this patch should not change the behavior of the kernel in any way, it will be up to the latter LSM specific patches in this series to change the hook implementations and return the correct credentials. Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA) Acked-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* | cipso,calipso: resolve a number of problems with the DOI refcountsPaul Moore2021-03-051-0/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | The current CIPSO and CALIPSO refcounting scheme for the DOI definitions is a bit flawed in that we: 1. Don't correctly match gets/puts in netlbl_cipsov4_list(). 2. Decrement the refcount on each attempt to remove the DOI from the DOI list, only removing it from the list once the refcount drops to zero. This patch fixes these problems by adding the missing "puts" to netlbl_cipsov4_list() and introduces a more conventional, i.e. not-buggy, refcounting mechanism to the DOI definitions. Upon the addition of a DOI to the DOI list, it is initialized with a refcount of one, removing a DOI from the list removes it from the list and drops the refcount by one; "gets" and "puts" behave as expected with respect to refcounts, increasing and decreasing the DOI's refcount by one. Fixes: b1edeb102397 ("netlabel: Replace protocol/NetLabel linking with refrerence counts") Fixes: d7cce01504a0 ("netlabel: Add support for removing a CALIPSO DOI.") Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2020-11-201-1/+1
|\ | | | | | | Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * netlabel: fix an uninitialized warning in netlbl_unlabel_staticlist()Paul Moore2020-11-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Static checking revealed that a previous fix to netlbl_unlabel_staticlist() leaves a stack variable uninitialized, this patches fixes that. Fixes: 866358ec331f ("netlabel: fix our progress tracking in netlbl_unlabel_staticlist()") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/r/160530304068.15651.18355773009751195447.stgit@sifl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | treewide: rename nla_strlcpy to nla_strscpy.Francis Laniel2020-11-161-1/+1
| | | | | | | | | | | | | | | | | | Calls to nla_strlcpy are now replaced by calls to nla_strscpy which is the new name of this function. Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2020-11-131-5/+12
|\| | | | | | | Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * netlabel: fix our progress tracking in netlbl_unlabel_staticlist()Paul Moore2020-11-111-5/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current NetLabel code doesn't correctly keep track of the netlink dump state in some cases, in particular when multiple interfaces with large configurations are loaded. The problem manifests itself by not reporting the full configuration to userspace, even though it is loaded and active in the kernel. This patch fixes this by ensuring that the dump state is properly reset when necessary inside the netlbl_unlabel_staticlist() function. Fixes: 8cc44579d1bd ("NetLabel: Introduce static network labels for unlabeled connections") Signed-off-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/160484450633.3752.16512718263560813473.stgit@sifl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: netlabel: Fix kerneldoc warningsAndrew Lunn2020-10-301-0/+1
|/ | | | | | | | | net/netlabel/netlabel_calipso.c:376: warning: Function parameter or member 'ops' not described in 'netlbl_calipso_ops_register' Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20201028005350.930299-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* genetlink: move to smaller ops wherever possibleJakub Kicinski2020-10-034-12/+12
| | | | | | | | Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: Fix some kernel-doc warningsWang Hai2020-09-091-2/+2
| | | | | | | | | | | | Fixes the following W=1 kernel build warning(s): net/netlabel/netlabel_calipso.c:438: warning: Excess function parameter 'audit_secid' description in 'calipso_doi_remove' net/netlabel/netlabel_calipso.c:605: warning: Excess function parameter 'reg' description in 'calipso_req_delattr' Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2020-09-051-29/+30
|\ | | | | | | | | | | | | | | | | | | | | | | We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * netlabel: fix problems with mapping removalPaul Moore2020-08-251-29/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes two main problems seen when removing NetLabel mappings: memory leaks and potentially extra audit noise. The memory leaks are caused by not properly free'ing the mapping's address selector struct when free'ing the entire entry as well as not properly cleaning up a temporary mapping entry when adding new address selectors to an existing entry. This patch fixes both these problems such that kmemleak reports no NetLabel associated leaks after running the SELinux test suite. The potentially extra audit noise was caused by the auditing code in netlbl_domhsh_remove_entry() being called regardless of the entry's validity. If another thread had already marked the entry as invalid, but not removed/free'd it from the list of mappings, then it was possible that an additional mapping removal audit record would be generated. This patch fixes this by returning early from the removal function when the entry was previously marked invalid. This change also had the side benefit of improving the code by decreasing the indentation level of large chunk of code by one (accounting for most of the diffstat). Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netlabel: remove unused param from audit_log_format()Alex Dewar2020-08-281-3/+2
|/ | | | | | | | | | | | | Commit d3b990b7f327 ("netlabel: fix problems with mapping removal") added a check to return an error if ret_val != 0, before ret_val is later used in a log message. Now it will unconditionally print "... res=1". So just drop the check. Addresses-Coverity: ("Dead code") Fixes: d3b990b7f327 ("netlabel: fix problems with mapping removal") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: netlabel: kerneldoc fixesAndrew Lunn2020-07-141-1/+1
| | | | | | | | | Simple fixes which require no deep knowledge of the code. Cc: Paul Moore <paul@paul-moore.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada2020-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* netlabel: cope with NULL catmapPaolo Abeni2020-05-131-0/+6
| | | | | | | | | | | | | | | | | | | | | | The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by: Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff251da ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: Kconfig: Update reference for NetLabel Tools projectSalvatore Bonaccorso2020-04-231-1/+1
| | | | | | | | | The NetLabel Tools project has moved from http://netlabel.sf.net to a GitHub project. Update to directly refer to the new home for the tools. Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel_domainhash.c: Use built-in RCU list checkingMadhuparna Bhowmik2020-02-181-1/+2
| | | | | | | | | | | list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: netlabel: Use built-in RCU list checkingMadhuparna Bhowmik2020-02-181-1/+2
| | | | | | | | | | | list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: remove redundant assignment to pointer iterColin Ian King2019-09-011-1/+1
| | | | | | | | | | | Pointer iter is being initialized with a value that is never read and is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner2019-05-2115-225/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* genetlink: optionally validate strictly/dumpsJohannes Berg2019-04-274-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: make validation more configurable for future strictnessJohannes Berg2019-04-271-16/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek2019-04-272-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* genetlink: make policy common to familyJohannes Berg2019-03-224-24/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: fix out-of-bounds memory accessesPaul Moore2019-02-281-1/+2
| | | | | | | | | | | | | | | | | There are two array out-of-bounds memory accesses, one in cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both errors are embarassingly simple, and the fixes are straightforward. As a FYI for anyone backporting this patch to kernels prior to v4.8, you'll want to apply the netlbl_bitmap_walk() patch to cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before Linux v4.8. Reported-by: Jann Horn <jannh@google.com> Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine") Fixes: 3faa8f982f95 ("netlabel: Move bitmap manipulation functions to the NetLabel core.") Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlabel: check for IPV4MASK in addrinfo_getSean Tranchetti2018-09-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | netlbl_unlabel_addrinfo_get() assumes that if it finds the NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is not necessarily the case as the current checks in netlbl_unlabel_staticadd() and friends are not sufficent to enforce this. If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR, NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes, these functions will all call netlbl_unlabel_addrinfo_get() which will then attempt dereference NULL when fetching the non-existent NLBL_UNLABEL_A_IPV4MASK attribute: Unable to handle kernel NULL pointer dereference at virtual address 0 Process unlab (pid: 31762, stack limit = 0xffffff80502d8000) Call trace: netlbl_unlabel_addrinfo_get+0x44/0xd8 netlbl_unlabel_staticremovedef+0x98/0xe0 genl_rcv_msg+0x354/0x388 netlink_rcv_skb+0xac/0x118 genl_rcv+0x34/0x48 netlink_unicast+0x158/0x1f0 netlink_sendmsg+0x32c/0x338 sock_sendmsg+0x44/0x60 ___sys_sendmsg+0x1d0/0x2a8 __sys_sendmsg+0x64/0xb4 SyS_sendmsg+0x34/0x4c el0_svc_naked+0x34/0x38 Code: 51001149 7100113f 540000a0 f9401508 (79400108) ---[ end trace f6438a488e737143 ]--- Kernel panic - not syncing: Fatal exception Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* audit: eliminate audit_enabled magic number comparisonRichard Guy Briggs2018-06-191-1/+1
| | | | | | | | | Remove comparison of audit_enabled to magic numbers outside of audit. Related: https://github.com/linux-audit/audit-kernel/issues/86 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* audit: use inline function to get audit contextRichard Guy Briggs2018-05-141-1/+1
| | | | | | | | | | Recognizing that the audit context is an internal audit value, use an access function to retrieve the audit context pointer for the task rather than reaching directly into the task struct to get it. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> [PM: merge fuzz in auditsc.c and selinuxfs.c, checkpatch.pl fixes] Signed-off-by: Paul Moore <paul@paul-moore.com>
* netlabel: If PF_INET6, check sk_buff ip header versionRichard Haines2018-02-141-0/+10
| | | | | | | | | | When resolving a fallback label, check the sk_buff version as it is possible (e.g. SCTP) to have family = PF_INET6 while receiving ip_hdr(skb)->version = 4. Signed-off-by: Richard Haines <richard_c_haines@btinternet.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* net/netlabel: Add list_next_rcu() in rcu_dereference().Tim Hansen2017-11-181-2/+2
| | | | | | | | | Add list_next_rcu() for fetching next list in rcu_deference safely. Found with sparse in linux-next tree on tag next-20171116. Signed-off-by: Tim Hansen <devtimhansen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar2017-11-071-0/+1
|\ | | | | | | | | | | | | | | | | | | Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland2017-10-251-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 19:46:29 +0100