| Commit message (Collapse) | Author | Files | Lines |
|---|
|
The qemu argument -enable-kvm is duplicated because the qemu_args bash
variable in kvm-test-1-run.sh already provides it. This commit therefore
removes the ppc64-specific copy in functions.sh.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
If you build a kernel with CONFIG_PREEMPTION=n and CONFIG_PREEMPT_COUNT=y,
then run the rcutorture tests specifying stalls as follows:
runqemu kvm slirp nographic qemuparams="-m 1024 -smp 4" \
bootparams="console=ttyS0 rcutorture.stall_cpu=30 \
rcutorture.stall_no_softlockup=1 rcutorture.stall_cpu_block=1" -d
The tests will produce the following splat:
[ 10.841071] rcu-torture: rcu_torture_stall begin CPU stall
[ 10.841073] rcu_torture_stall start on CPU 3.
[ 10.841077] BUG: scheduling while atomic: rcu_torture_sta/66/0x0000000
....
[ 10.841108] Call Trace:
[ 10.841110] <TASK>
[ 10.841112] dump_stack_lvl+0x64/0xb0
[ 10.841118] dump_stack+0x10/0x20
[ 10.841121] __schedule_bug+0x8b/0xb0
[ 10.841126] __schedule+0x2172/0x2940
[ 10.841157] schedule+0x9b/0x150
[ 10.841160] schedule_timeout+0x2e8/0x4f0
[ 10.841192] schedule_timeout_uninterruptible+0x47/0x50
[ 10.841195] rcu_torture_stall+0x2e8/0x300
[ 10.841199] kthread+0x175/0x1a0
[ 10.841206] ret_from_fork+0x2c/0x50
This is because the rcutorture.stall_cpu_block=1 module parameter causes
rcu_torture_stall() to invoke schedule_timeout_uninterruptible() within
an RCU read-side critical section. This in turn results in a quiescent
state (which prevents the stall) and a sleep in an atomic context (which
produces the above splat).
Although this code is operating as designed, the design has proven to
be counterintuitive to many. This commit therefore updates the description
in kernel-parameters.txt accordingly.
[ paulmck: Apply Joel Fernandes feedback. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Running the 'kfree_rcu_test' test case [1] results in a splat [2].
The root cause is the kfree_scale_thread thread(s) continue running
after unloading the rcuscale module. This commit fixes that isue by
invoking kfree_scale_cleanup() from rcu_scale_cleanup() when removing
the rcuscale module.
[1] modprobe rcuscale kfree_rcu_test=1
// After some time
rmmod rcuscale
rmmod torture
[2] BUG: unable to handle page fault for address: ffffffffc0601a87
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 11de4f067 P4D 11de4f067 PUD 11de51067 PMD 112f4d067 PTE 0
Oops: 0010 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1798 Comm: kfree_scale_thr Not tainted 6.3.0-rc1-rcu+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
RIP: 0010:0xffffffffc0601a87
Code: Unable to access opcode bytes at 0xffffffffc0601a5d.
RSP: 0018:ffffb25bc2e57e18 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffffffffc061f0b6 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff962fd0de RDI: ffffffff962fd0de
RBP: ffffb25bc2e57ea8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 000000000000000a R15: 00000000001c1dbe
FS: 0000000000000000(0000) GS:ffff921fa2200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc0601a5d CR3: 000000011de4c006 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? kvfree_call_rcu+0xf0/0x3a0
? kthread+0xf3/0x120
? kthread_complete_and_exit+0x20/0x20
? ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: rfkill sunrpc ... [last unloaded: torture]
CR2: ffffffffc0601a87
---[ end trace 0000000000000000 ]---
Fixes: e6e78b004fa7 ("rcuperf: Add kfree_rcu() performance Tests")
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This code-movement-only commit moves the rcu_scale_cleanup() and
rcu_scale_shutdown() functions to follow kfree_scale_cleanup().
This is code movement is in preparation for a bug-fix patch that invokes
kfree_scale_cleanup() from rcu_scale_cleanup().
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
The BUSTED-BOOST and TREE03 scenarios specify a mythical tree.use_softirq
module parameter, which means a failure to get full test coverage. This
commit therefore corrects the name to rcutree.use_softirq.
Fixes: e2b949d54392 ("rcutorture: Make TREE03 use real-time tree.use_softirq setting")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
This commit adds a long_hold module parameter to allow testing diagnostics
for excessive lock-hold times. Also adjust torture_param() invocations
for longer line length while in the area.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
Callbacks can only be queued as lazy on NOCB CPUs, therefore iterating
over the NOCB mask is enough for both counting and scanning. Just lock
the mostly uncontended barrier mutex on counting as well in order to
keep rcu_nocb_mask stable.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_tasks_invoke_cbs() function relies on queue_work_on() to silently
fall back to WORK_CPU_UNBOUND when the specified CPU is offline. However,
the queue_work_on() function's silent fallback mechanism relies on that
CPU having been online at some time in the past. When queue_work_on()
is passed a CPU that has never been online, workqueue lockups ensue,
which can be bad for your kernel's general health and well-being.
This commit therefore checks whether a given CPU has ever been online,
and, if not substitutes WORK_CPU_UNBOUND in the subsequent call to
queue_work_on(). Why not simply omit the queue_work_on() call entirely?
Because this function is flooding callback-invocation notifications
to all CPUs, and must deal with possibilities that include a sparse
cpu_possible_mask.
This commit also moves the setting of the rcu_data structure's
->beenonline field to rcu_cpu_starting(), which executes on the
incoming CPU before that CPU has ever enabled interrupts. This ensures
that the required workqueues are present. In addition, because the
incoming CPU has not yet enabled its interrupts, there cannot yet have
been any softirq handlers running on this CPU, which means that the
WARN_ON_ONCE(!rdp->beenonline) within the RCU_SOFTIRQ handler cannot
have triggered yet.
Fixes: d363f833c6d88 ("rcu-tasks: Use workqueues for multiple rcu_tasks_invoke_cbs() invocations")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, rcu_cpu_starting() is written so that it might be invoked
with interrupts enabled. However, it is always called when interrupts
are disabled, either by rcu_init(), notify_cpu_starting(), or from a
call point prior to the call to notify_cpu_starting().
But why bother requiring that interrupts be disabled? The purpose is
to allow the rcu_data structure's ->beenonline flag to be set after all
early processing has completed for the incoming CPU, thus allowing this
flag to be used to determine when workqueues have been set up for the
incoming CPU, while still allowing this flag to be used as a diagnostic
within rcu_core().
This commit therefore makes rcu_cpu_starting() rely on interrupts being
disabled.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_data structure's ->rcu_cpu_has_work field can be modified by
any CPU attempting to wake up the rcuc kthread. Therefore, this commit
marks accesses to this field from the rcu_cpu_kthread() function.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The per-CPU rcu_data structure's ->cpu_no_qs.b.exp field is updated
only on the instance corresponding to the current CPU, but can be read
more widely. Unmarked accesses are OK from the corresponding CPU, but
only if interrupts are disabled, given that interrupt handlers can and
do modify this field.
Unfortunately, although the load from rcu_preempt_deferred_qs() is always
carried out from the corresponding CPU, interrupts are not necessarily
disabled. This commit therefore upgrades this load to READ_ONCE.
Similarly, the diagnostic access from synchronize_rcu_expedited_wait()
might run with interrupts disabled and from some other CPU. This commit
therefore marks this load with data_race().
Finally, the C-language access in rcu_preempt_ctxt_queue() is OK as
is because interrupts are disabled and this load is always from the
corresponding CPU. This commit adds a comment giving the rationale for
this access being safe.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, if there are more than 100 ready-to-invoke RCU callbacks queued
on a given CPU, the rcu_do_batch() function sets a timeout for invocation
of the series. This timeout defaulting to three milliseconds, and may
be adjusted using the rcutree.rcu_resched_ns kernel boot parameter.
This timeout is checked using local_clock(), but the overhead of this
function combined with the common-case very small callback-invocation
overhead means that local_clock() is checked every 32nd invocation.
This works well except for longer-than average callbacks. For example,
a series of 500-microsecond-duration callbacks means that local_clock()
is checked only once every 16 milliseconds, which makes it difficult to
enforce a three-millisecond timeout.
This commit therefore adds a Kconfig option RCU_DOUBLE_CHECK_CB_TIME
that enables backup timeout checking using the coarser grained but
lighter weight jiffies. If the jiffies counter detects a timeout,
then local_clock() is consulted even if this is not the 32nd callback.
This prevents the aforementioned 16-millisecond latency blow.
Reported-by: Domas Mituzas <dmituzas@meta.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, a callback-invocation time limit is enforced only for
callbacks invoked from the softirq environment, the rationale being
that when callbacks are instead invoked from rcuc and rcuoc kthreads,
these callbacks cannot be holding up other softirq vectors.
Which is in fact true. However, if an rcuc kthread spends too much time
invoking callbacks, it can delay quiescent-state reports from its CPU,
which can also be a problem.
This commit therefore applies the callback-invocation time limit to
callback invocation from the rcuc kthreads as well as from softirq.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Since there are now exactly _zero_ users of RCU_NONIDLE(), make it go
away before someone else decides to (ab)use it.
[ paulmck: Remove extraneous whitespace. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Recent changes and additions to RCU have not been reflected in
Documentation/core-api/kernel-api.rst, which makes it harder to find
the kernel-doc headers in recently added RCU files.
Therefore, add those files.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Liam Beguin <liambeguin@gmail.com>
Cc: <linux-doc@vger.kernel.org>
|
|
This commit uses rtp->name instead of __func__ and outputs the value
of rcu_task_cb_adjust, thus reducing console-log output.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
pr_info() is called with rtp->cbs_gbl_lock spin lock locked. Because
pr_info() calls printk() that might sleep, this will result in BUG
like below:
[ 0.206455] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.206463]
[ 0.206464] =============================
[ 0.206464] [ BUG: Invalid wait context ]
[ 0.206465] 5.19.0-00428-g9de1f9c8ca51 #5 Not tainted
[ 0.206466] -----------------------------
[ 0.206466] swapper/0/1 is trying to lock:
[ 0.206467] ffffffffa0167a58 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x327/0x4a0
[ 0.206473] other info that might help us debug this:
[ 0.206473] context-{5:5}
[ 0.206474] 3 locks held by swapper/0/1:
[ 0.206474] #0: ffffffff9eb597e0 (rcu_tasks.cbs_gbl_lock){....}-{2:2}, at: cblist_init_generic.constprop.0+0x14/0x1f0
[ 0.206478] #1: ffffffff9eb579c0 (console_lock){+.+.}-{0:0}, at: _printk+0x63/0x7e
[ 0.206482] #2: ffffffff9ea77780 (console_owner){....}-{0:0}, at: console_emit_next_record.constprop.0+0x111/0x330
[ 0.206485] stack backtrace:
[ 0.206486] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-00428-g9de1f9c8ca51 #5
[ 0.206488] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[ 0.206489] Call Trace:
[ 0.206490] <TASK>
[ 0.206491] dump_stack_lvl+0x6a/0x9f
[ 0.206493] __lock_acquire.cold+0x2d7/0x2fe
[ 0.206496] ? stack_trace_save+0x46/0x70
[ 0.206497] lock_acquire+0xd1/0x2f0
[ 0.206499] ? serial8250_console_write+0x327/0x4a0
[ 0.206500] ? __lock_acquire+0x5c7/0x2720
[ 0.206502] _raw_spin_lock_irqsave+0x3d/0x90
[ 0.206504] ? serial8250_console_write+0x327/0x4a0
[ 0.206506] serial8250_console_write+0x327/0x4a0
[ 0.206508] console_emit_next_record.constprop.0+0x180/0x330
[ 0.206511] console_unlock+0xf7/0x1f0
[ 0.206512] vprintk_emit+0xf7/0x330
[ 0.206514] _printk+0x63/0x7e
[ 0.206516] cblist_init_generic.constprop.0.cold+0x24/0x32
[ 0.206518] rcu_init_tasks_generic+0x5/0xd9
[ 0.206522] kernel_init_freeable+0x15b/0x2a2
[ 0.206523] ? rest_init+0x160/0x160
[ 0.206526] kernel_init+0x11/0x120
[ 0.206527] ret_from_fork+0x1f/0x30
[ 0.206530] </TASK>
[ 0.207018] cblist_init_generic: Setting shift to 1 and lim to 1.
This patch moves pr_info() so that it is called without
rtp->cbs_gbl_lock locked.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The ->lazy_len is only checked locklessly. Recheck again under the
->nocb_lock to avoid spending more time on flushing/waking if not
necessary. The ->lazy_len can still increment concurrently (from 1 to
infinity) but under the ->nocb_lock we at least know for sure if there
are lazy callbacks at all (->lazy_len > 0).
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The shrinker resets the lazy callbacks counter in order to trigger the
pending lazy queue flush though the rcuog kthread. The counter reset is
protected by the ->nocb_lock against concurrent accesses...except
for one of them. Here is a list of existing synchronized readers/writer:
1) The first lazy enqueuer (incrementing ->lazy_len to 1) does so under
->nocb_lock and ->nocb_bypass_lock.
2) The further lazy enqueuers (incrementing ->lazy_len above 1) do so
under ->nocb_bypass_lock _only_.
3) The lazy flush checks and resets to 0 under ->nocb_lock and
->nocb_bypass_lock.
The shrinker protects its ->lazy_len reset against cases 1) and 3) but
not against 2). As such, setting ->lazy_len to 0 under the ->nocb_lock
may be cancelled right away by an overwrite from an enqueuer, leading
rcuog to ignore the flush.
To avoid that, use the proper bypass flush API which takes care of all
those details.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The shrinker may run concurrently with callbacks (de-)offloading. As
such, calling rcu_nocb_lock() is very dangerous because it does a
conditional locking. The worst outcome is that rcu_nocb_lock() doesn't
lock but rcu_nocb_unlock() eventually unlocks, or the reverse, creating
an imbalance.
Fix this with protecting against (de-)offloading using the barrier mutex.
Although if the barrier mutex is contended, which should be rare, then
step aside so as not to trigger a mutex VS allocation
dependency chain.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If the rcutree.rcu_min_cached_objs kernel boot parameter is set to zero,
then krcp->page_cache_work will never be triggered to fill page cache.
In addition, the put_cached_bnode() will not fill page cache. As a
result krcp->bkvcache will always be empty, so there is no need to acquire
krcp->lock to get page from krcp->bkvcache. This commit therefore makes
drain_page_cache() return immediately if the rcu_min_cached_objs is zero.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When the fill_page_cache_func() function is invoked, it assumes that
the cache of pages is completely empty. However, there can be some time
between triggering execution of this function and its actual invocation.
During this time, kfree_rcu_work() might run, and might fill in part or
all of this cache of pages, thus invalidating the fill_page_cache_func()
function's assumption.
This will not overfill the cache because put_cached_bnode() will reject
the extra page. However, it will result in a needless allocation and
freeing of one extra page, which might not be helpful under lowish-memory
conditions.
This commit therefore causes the fill_page_cache_func() to explicitly
account for pages that have been placed into the cache shortly before
it starts running.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
By default the cache size is 5 pages per CPU, but it can be disabled at
boot time by setting the rcu_min_cached_objs to zero. When that happens,
the current code will uselessly set an hrtimer to schedule refilling this
cache with zero pages. This commit therefore streamlines this process
by simply refusing the set the hrtimer when rcu_min_cached_objs is zero.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The add_ptr_to_bulk_krc_lock() function is invoked to allocate a new
kfree_rcu() page, also known as a kvfree_rcu_bulk_data structure.
The kfree_rcu_cpu structure's lock is used to protect this operation,
except that this lock must be momentarily dropped when allocating memory.
It is clearly important that the lock that is reacquired be the same
lock that was acquired initially via krc_this_cpu_lock().
Unfortunately, this same krc_this_cpu_lock() function is used to
re-acquire this lock, and if the task migrated to some other CPU during
the memory allocation, this will result in the kvfree_rcu_bulk_data
structure being added to the wrong CPU's kfree_rcu_cpu structure.
This commit therefore replaces that second call to krc_this_cpu_lock()
with raw_spin_lock_irqsave() in order to explicitly acquire the lock on
the correct kfree_rcu_cpu structure, thus keeping things straight even
when the task migrates.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If kvfree_rcu_bulk() sees that the required grace period has failed to
elapse, it leaks the memory because readers might still be using it.
But in that case, the debug-objects subsystem still marks the relevant
structures as having been freed, even though they are instead being
leaked.
This commit fixes this mismatch by invoking debug_rcu_bhead_unqueue()
only when we are actually going to free the objects.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Under low-memory conditions, kvfree_rcu() will use each object's
rcu_head structure to queue objects in a singly linked list headed by
the kfree_rcu_cpu structure's ->head field. This list is passed to
call_rcu() as a unit, but there is no indication of which grace period
this list needs to wait for. This in turn prevents adding debug checks
in the kfree_rcu_work() as was done for the two page-of-pointers channels
in the kfree_rcu_cpu structure.
This commit therefore adds a ->head_free_gp_snap field to the
kfree_rcu_cpu_work structure to record this grace-period number. It also
adds a WARN_ON_ONCE() to kfree_rcu_monitor() that checks to make sure
that the required grace period has in fact elapsed.
[ paulmck: Fix kerneldoc issue raised by Stephen Rothwell. ]
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds debugging checks to verify that the required RCU
grace period has elapsed for each kvfree_rcu_bulk_data structure that
arrives at the kvfree_rcu_bulk() function. These checks make use
of that structure's ->gp_snap field, which has been upgraded from an
unsigned long to an rcu_gp_oldstate structure. This upgrade reduces
the chances of false positives to nearly zero, even on 32-bit systems,
for which this structure carries 64 bits of state.
Cc: Ziwei Dai <ziwei.dai@unisoc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The kvfree_rcu() and kfree_rcu() APIs are hazardous in that if you forget
the second argument, it works, but might sleep. This sleeping can be a
correctness bug from atomic contexts, and even in non-atomic contexts it
might introduce unacceptable latencies. This commit therefore removes the
single-argument kvfree_rcu() and kfree_rcu() macros. Code that would have
previously used these single-argument kvfree_rcu() and kfree_rcu() macros
should instead use kvfree_rcu_mightsleep() or kfree_rcu_mightsleep().
[ paulmck: Apply Joel Fernandes feedback. ]
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
This commit removes extraneous parentheses from srcu_read_lock(),
srcu_read_lock_nmisafe(), srcu_read_unlock(), and
srcu_read_unlock_nmisafe(). Looks like someone was once a macro.
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The qiang1.zhang@intel.com email address will no longer be used, so this
commit updates to qiang.zhang1211@gmail.com.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds kernel-parameters.txt documentation for the
rcutree.rcu_resched_ns module parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit puts the rcutree module parameters back into proper
alphabetical order.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
|
|
This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b.
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This reverts commit 51924ae69eea5bc90b5da525fbcf4bbd5f8551b3.
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The allocated dmapool pages are never freed for the lifetime of the pool.
There is no need for the two level list+stack lookup for finding a free
block since nothing is ever removed from the list. Just use a simple
stack, reducing time complexity to constant.
The implementation inserts the stack linking elements and the dma handle
of the block within itself when freed. This means the smallest possible
dmapool block is increased to at most 16 bytes to accommodate these
fields, but there are no exisiting users requesting a dma pool smaller
than that anyway.
Removing the list has a significant change in performance. Using the
kernel's micro-benchmarking self test:
Before:
# modprobe dmapool_test
dmapool test: size:16 blocks:8192 time:57282
dmapool test: size:64 blocks:8192 time:172562
dmapool test: size:256 blocks:8192 time:789247
dmapool test: size:1024 blocks:2048 time:371823
dmapool test: size:4096 blocks:1024 time:362237
After:
# modprobe dmapool_test
dmapool test: size:16 blocks:8192 time:24997
dmapool test: size:64 blocks:8192 time:26584
dmapool test: size:256 blocks:8192 time:33542
dmapool test: size:1024 blocks:2048 time:9022
dmapool test: size:4096 blocks:1024 time:6045
The module test allocates quite a few blocks that may not accurately
represent how these pools are used in real life. For a more marco level
benchmark, running fio high-depth + high-batched on nvme, this patch shows
submission and completion latency reduced by ~100usec each, 1% IOPs
improvement, and perf record's time spent in dma_pool_alloc/free were
reduced by half.
[kbusch@kernel.org: push new blocks in ascending order]
Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com
Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If debug is enabled, dmapool will poison the range, so no need to clear it
to 0 immediately before writing over it.
Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The actions for busy and not busy are mostly the same, so combine these
and remove the unnecessary function. Also, the pool is about to be freed
so there's no need to poison the page data since we only check for poison
on alloc, which can't be done on a freed pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Various fields of the dma pool are set in different places. Move it all
to one function.
Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Handle the error in a condition so the good path can be in the normal
flow.
Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clean up the normal path by moving the debug code outside it.
Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid double-memset of the same allocated memory in dma_pool_alloc() when
both DMAPOOL_DEBUG is enabled and init_on_alloc=1.
Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To represent the size of a single allocation, dmapool currently uses
'unsigned int' in some places and 'size_t' in other places. Standardize
on 'unsigned int' to reduce overhead, but use 'size_t' when counting all
the blocks in the entire pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
dmapool originally tried to support pools without a device because
dma_alloc_coherent() supports allocations without a device. But nobody
ended up using dma pools without a device, and trying to do so will result
in an oops. So remove the checks for pool->dev == NULL since they are
unneeded bloat.
[kbusch@kernel.org: add check for null dev on create]
Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix another case of an incorrect check for the returned 'folio' value
from __filemap_get_folio().
The failure case used to return NULL, but was changed by commit
66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio").
But in the meantime, commit ec108d3cc766 ("NFS: Convert readdir page
array functions to use a folio") added a new user of that function.
And my merge of the two did not fix this up correctly.
The ext4 merge had the same issue, but that one had been caught in
linux-next and got properly fixed while merging.
Fixes: 0127f25b5dfc ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs")
Cc: Anna Schumaker <anna@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Keep returning NULL on failure instead of letting an ERR_PTR escape to
callers that don't expect it.
Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de
Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.
After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads. However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.
Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.
This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned.
Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the page is pinned, there's no point in trying to reclaim it.
Furthermore if the page is from the page cache we don't want to reclaim
fs-private data from the page because the pinning process may be writing
to the page at any time and reclaiming fs private info on a dirty page can
upset the filesystem (see link below).
Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the disk image that nilfs2 mounts is corrupted and a virtual block
address obtained by block lookup for a metadata file is invalid,
nilfs_bmap_lookup_at_level() may return the same internal return code as
-ENOENT, meaning the block does not exist in the metadata file.
This duplication of return codes confuses nilfs_mdt_get_block(), causing
it to read and create a metadata block indefinitely.
In particular, if this happens to the inode metadata file, ifile,
semaphore i_rwsem can be left held, causing task hangs in lock_mount.
Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block
address translation failures with -ENOENT as metadata corruption instead
of returning the error code.
Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
