summaryrefslogtreecommitdiffstats
path: root/net/sctp (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-08-061-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/Makefile net/ipv6/sysctl_net_ipv6.c Two ipv6_table_template[] additions overlap, so the index of the ipv6_table[x] assignments needed to be adjusted. In the drivers/net/Makefile case, we've gotten rid of the garbage whereby we had to list every single USB networking driver in the top-level Makefile, there is just one "USB_NETWORKING" that guards everything. Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: fix possible seqlock seadlock in sctp_packet_transmit()Eric Dumazet2014-08-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dave reported following splat, caused by improper use of IP_INC_STATS_BH() in process context. BUG: using __this_cpu_add() in preemptible [00000000] code: trinity-c117/14551 caller is __this_cpu_preempt_check+0x13/0x20 CPU: 3 PID: 14551 Comm: trinity-c117 Not tainted 3.16.0+ #33 ffffffff9ec898f0 0000000047ea7e23 ffff88022d32f7f0 ffffffff9e7ee207 0000000000000003 ffff88022d32f818 ffffffff9e397eaa ffff88023ee70b40 ffff88022d32f970 ffff8801c026d580 ffff88022d32f828 ffffffff9e397ee3 Call Trace: [<ffffffff9e7ee207>] dump_stack+0x4e/0x7a [<ffffffff9e397eaa>] check_preemption_disabled+0xfa/0x100 [<ffffffff9e397ee3>] __this_cpu_preempt_check+0x13/0x20 [<ffffffffc0839872>] sctp_packet_transmit+0x692/0x710 [sctp] [<ffffffffc082a7f2>] sctp_outq_flush+0x2a2/0xc30 [sctp] [<ffffffff9e0d985c>] ? mark_held_locks+0x7c/0xb0 [<ffffffff9e7f8c6d>] ? _raw_spin_unlock_irqrestore+0x5d/0x80 [<ffffffffc082b99a>] sctp_outq_uncork+0x1a/0x20 [sctp] [<ffffffffc081e112>] sctp_cmd_interpreter.isra.23+0x1142/0x13f0 [sctp] [<ffffffffc081c86b>] sctp_do_sm+0xdb/0x330 [sctp] [<ffffffff9e0b8f1b>] ? preempt_count_sub+0xab/0x100 [<ffffffffc083b350>] ? sctp_cname+0x70/0x70 [sctp] [<ffffffffc08389ca>] sctp_primitive_ASSOCIATE+0x3a/0x50 [sctp] [<ffffffffc083358f>] sctp_sendmsg+0x88f/0xe30 [sctp] [<ffffffff9e0d673a>] ? lock_release_holdtime.part.28+0x9a/0x160 [<ffffffff9e0d62ce>] ? put_lock_stats.isra.27+0xe/0x30 [<ffffffff9e73b624>] inet_sendmsg+0x104/0x220 [<ffffffff9e73b525>] ? inet_sendmsg+0x5/0x220 [<ffffffff9e68ac4e>] sock_sendmsg+0x9e/0xe0 [<ffffffff9e1c0c09>] ? might_fault+0xb9/0xc0 [<ffffffff9e1c0bae>] ? might_fault+0x5e/0xc0 [<ffffffff9e68b234>] SYSC_sendto+0x124/0x1c0 [<ffffffff9e0136b0>] ? syscall_trace_enter+0x250/0x330 [<ffffffff9e68c3ce>] SyS_sendto+0xe/0x10 [<ffffffff9e7f9be4>] tracesys+0xdd/0xe2 This is a followup of commits f1d8cba61c3c4b ("inet: fix possible seqlock deadlocks") and 7f88c6b23afbd315 ("ipv6: fix possible seqlock deadlock in ip6_finish_output2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: Dave Jones <davej@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: fix the counter ICMP_MIB_INERRORS/ICMP6_MIB_INERRORSDuan Jiong2014-08-011-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When dealing with ICMPv[46] Error Message, function icmp_socket_deliver() and icmpv6_notify() do some valid checks on packet's length, but then some protocols check packet's length redaudantly. So remove those duplicated statements, and increase counter ICMP_MIB_INERRORS/ICMP6_MIB_INERRORS in function icmp_socket_deliver() and icmpv6_notify() respectively. In addition, add missed counter in udp6/udplite6 when socket is NULL. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: Fixup v4mapped behaviour to comply with Sock APIJason Gunthorpe2014-08-015-100/+107
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SCTP socket extensions API document describes the v4mapping option as follows: 8.1.15. Set/Clear IPv4 Mapped Addresses (SCTP_I_WANT_MAPPED_V4_ADDR) This socket option is a Boolean flag which turns on or off the mapping of IPv4 addresses. If this option is turned on, then IPv4 addresses will be mapped to V6 representation. If this option is turned off, then no mapping will be done of V4 addresses and a user will receive both PF_INET6 and PF_INET type addresses on the socket. See [RFC3542] for more details on mapped V6 addresses. This description isn't really in line with what the code does though. Introduce addr_to_user (renamed addr_v4map), which should be called before any sockaddr is passed back to user space. The new function places the sockaddr into the correct format depending on the SCTP_I_WANT_MAPPED_V4_ADDR option. Audit all places that touched v4mapped and either sanely construct a v4 or v6 address then call addr_to_user, or drop the unnecessary v4mapped check entirely. Audit all places that call addr_to_user and verify they are on a sycall return path. Add a custom getname that formats the address properly. Several bugs are addressed: - SCTP_I_WANT_MAPPED_V4_ADDR=0 often returned garbage for addresses to user space - The addr_len returned from recvmsg was not correct when returning AF_INET on a v6 socket - flowlabel and scope_id were not zerod when promoting a v4 to v6 - Some syscalls like bind and connect behaved differently depending on v4mapped Tested bind, getpeername, getsockname, connect, and recvmsg for proper behaviour in v4mapped = 1 and 0 cases. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-07-301-0/+1
|\| | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: inherit auth_capable on INIT collisionsDaniel Borkmann2014-07-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jason reported an oops caused by SCTP on his ARM machine with SCTP authentication enabled: Internal error: Oops: 17 [#1] ARM CPU: 0 PID: 104 Comm: sctp-test Not tainted 3.13.0-68744-g3632f30c9b20-dirty #1 task: c6eefa40 ti: c6f52000 task.ti: c6f52000 PC is at sctp_auth_calculate_hmac+0xc4/0x10c LR is at sg_init_table+0x20/0x38 pc : [<c024bb80>] lr : [<c00f32dc>] psr: 40000013 sp : c6f538e8 ip : 00000000 fp : c6f53924 r10: c6f50d80 r9 : 00000000 r8 : 00010000 r7 : 00000000 r6 : c7be4000 r5 : 00000000 r4 : c6f56254 r3 : c00c8170 r2 : 00000001 r1 : 00000008 r0 : c6f1e660 Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005397f Table: 06f28000 DAC: 00000015 Process sctp-test (pid: 104, stack limit = 0xc6f521c0) Stack: (0xc6f538e8 to 0xc6f54000) [...] Backtrace: [<c024babc>] (sctp_auth_calculate_hmac+0x0/0x10c) from [<c0249af8>] (sctp_packet_transmit+0x33c/0x5c8) [<c02497bc>] (sctp_packet_transmit+0x0/0x5c8) from [<c023e96c>] (sctp_outq_flush+0x7fc/0x844) [<c023e170>] (sctp_outq_flush+0x0/0x844) from [<c023ef78>] (sctp_outq_uncork+0x24/0x28) [<c023ef54>] (sctp_outq_uncork+0x0/0x28) from [<c0234364>] (sctp_side_effects+0x1134/0x1220) [<c0233230>] (sctp_side_effects+0x0/0x1220) from [<c02330b0>] (sctp_do_sm+0xac/0xd4) [<c0233004>] (sctp_do_sm+0x0/0xd4) from [<c023675c>] (sctp_assoc_bh_rcv+0x118/0x160) [<c0236644>] (sctp_assoc_bh_rcv+0x0/0x160) from [<c023d5bc>] (sctp_inq_push+0x6c/0x74) [<c023d550>] (sctp_inq_push+0x0/0x74) from [<c024a6b0>] (sctp_rcv+0x7d8/0x888) While we already had various kind of bugs in that area ec0223ec48a9 ("net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable") and b14878ccb7fa ("net: sctp: cache auth_enable per endpoint"), this one is a bit of a different kind. Giving a bit more background on why SCTP authentication is needed can be found in RFC4895: SCTP uses 32-bit verification tags to protect itself against blind attackers. These values are not changed during the lifetime of an SCTP association. Looking at new SCTP extensions, there is the need to have a method of proving that an SCTP chunk(s) was really sent by the original peer that started the association and not by a malicious attacker. To cause this bug, we're triggering an INIT collision between peers; normal SCTP handshake where both sides intent to authenticate packets contains RANDOM; CHUNKS; HMAC-ALGO parameters that are being negotiated among peers: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- RFC4895 says that each endpoint therefore knows its own random number and the peer's random number *after* the association has been established. The local and peer's random number along with the shared key are then part of the secret used for calculating the HMAC in the AUTH chunk. Now, in our scenario, we have 2 threads with 1 non-blocking SEQ_PACKET socket each, setting up common shared SCTP_AUTH_KEY and SCTP_AUTH_ACTIVE_KEY properly, and each of them calling sctp_bindx(3), listen(2) and connect(2) against each other, thus the handshake looks similar to this, e.g.: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- <--------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------- -------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------> ... Since such collisions can also happen with verification tags, the RFC4895 for AUTH rather vaguely says under section 6.1: In case of INIT collision, the rules governing the handling of this Random Number follow the same pattern as those for the Verification Tag, as explained in Section 5.2.4 of RFC 2960 [5]. Therefore, each endpoint knows its own Random Number and the peer's Random Number after the association has been established. In RFC2960, section 5.2.4, we're eventually hitting Action B: B) In this case, both sides may be attempting to start an association at about the same time but the peer endpoint started its INIT after responding to the local endpoint's INIT. Thus it may have picked a new Verification Tag not being aware of the previous Tag it had sent this endpoint. The endpoint should stay in or enter the ESTABLISHED state but it MUST update its peer's Verification Tag from the State Cookie, stop any init or cookie timers that may running and send a COOKIE ACK. In other words, the handling of the Random parameter is the same as behavior for the Verification Tag as described in Action B of section 5.2.4. Looking at the code, we exactly hit the sctp_sf_do_dupcook_b() case which triggers an SCTP_CMD_UPDATE_ASSOC command to the side effect interpreter, and in fact it properly copies over peer_{random, hmacs, chunks} parameters from the newly created association to update the existing one. Also, the old asoc_shared_key is being released and based on the new params, sctp_auth_asoc_init_active_key() updated. However, the issue observed in this case is that the previous asoc->peer.auth_capable was 0, and has *not* been updated, so that instead of creating a new secret, we're doing an early return from the function sctp_auth_asoc_init_active_key() leaving asoc->asoc_shared_key as NULL. However, we now have to authenticate chunks from the updated chunk list (e.g. COOKIE-ACK). That in fact causes the server side when responding with ... <------------------ AUTH; COOKIE-ACK ----------------- ... to trigger a NULL pointer dereference, since in sctp_packet_transmit(), it discovers that an AUTH chunk is being queued for xmit, and thus it calls sctp_auth_calculate_hmac(). Since the asoc->active_key_id is still inherited from the endpoint, and the same as encoded into the chunk, it uses asoc->asoc_shared_key, which is still NULL, as an asoc_key and dereferences it in ... crypto_hash_setkey(desc.tfm, &asoc_key->data[0], asoc_key->len) ... causing an oops. All this happens because sctp_make_cookie_ack() called with the *new* association has the peer.auth_capable=1 and therefore marks the chunk with auth=1 after checking sctp_auth_send_cid(), but it is *actually* sent later on over the then *updated* association's transport that didn't initialize its shared key due to peer.auth_capable=0. Since control chunks in that case are not sent by the temporary association which are scheduled for deletion, they are issued for xmit via SCTP_CMD_REPLY in the interpreter with the context of the *updated* association. peer.auth_capable was 0 in the updated association (which went from COOKIE_WAIT into ESTABLISHED state), since all previous processing that performed sctp_process_init() was being done on temporary associations, that we eventually throw away each time. The correct fix is to update to the new peer.auth_capable value as well in the collision case via sctp_assoc_update(), so that in case the collision migrated from 0 -> 1, sctp_auth_asoc_init_active_key() can properly recalculate the secret. This therefore fixes the observed server panic. Fixes: 730fc3d05cd4 ("[SCTP]: Implete SCTP-AUTH parameter processing") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: Rename SCTP_XMIT_NAGLE_DELAY to SCTP_XMIT_DELAYDavid Laight2014-07-222-4/+4
| | | | | | | | | | | | | | | | | | | | MSG_MORE and 'corking' a socket would require that the transmit of a data chunk be delayed. Rename the return value to be less specific. Signed-off-by: David Laight <david.laight@aculab.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: Open out the check for NagleDavid Laight2014-07-221-33/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check for Nagle contains 6 separate checks all of which must be true before a data packet is delayed. Separate out each into its own 'if (test) return SCTP_XMIT_OK' so that the reasons can be individually described. Also return directly with SCTP_XMIT_RWND_FULL. Delete the now-unused 'retval' variable and 'finish' label from sctp_packet_can_append_data(). Signed-off-by: David Laight <david.laight@aculab.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: deprecate rfc6458, 5.3.2. SCTP_SNDRCV supportDaniel Borkmann2014-07-161-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With support of SCTP_SNDINFO/SCTP_RCVINFO as described in RFC6458, 5.3.4/5.3.5, we can now deprecate SCTP_SNDRCV. The RFC already declares it as deprecated: This structure mixes the send and receive path. SCTP_SNDINFO (described in Section 5.3.4) and SCTP_RCVINFO (described in Section 5.3.5) split this information. These structures should be used, when possible, since SCTP_SNDRCV is deprecated. So whenever a user tries to subscribe to sctp_data_io_event via setsockopt(2) which triggers inclusion of SCTP_SNDRCV cmsg_type, issue a warning in the log. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: implement rfc6458, 8.1.31. SCTP_DEFAULT_SNDINFO supportGeir Ola Vaagland2014-07-161-9/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements section 8.1.31. of RFC6458, which adds support for setting/retrieving SCTP_DEFAULT_SNDINFO: Applications that wish to use the sendto() system call may wish to specify a default set of parameters that would normally be supplied through the inclusion of ancillary data. This socket option allows such an application to set the default sctp_sndinfo structure. The application that wishes to use this socket option simply passes the sctp_sndinfo structure (defined in Section 5.3.4) to this call. The input parameters accepted by this call include snd_sid, snd_flags, snd_ppid, and snd_context. The snd_flags parameter is composed of a bitwise OR of SCTP_UNORDERED, SCTP_EOF, and SCTP_SENDALL. The snd_assoc_id field specifies the association to which to apply the parameters. For a one-to-many style socket, any of the predefined constants are also allowed in this field. The field is ignored for one-to-one style sockets. Joint work with Daniel Borkmann. Signed-off-by: Geir Ola Vaagland <geirola@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: implement rfc6458, 5.3.6. SCTP_NXTINFO cmsg supportGeir Ola Vaagland2014-07-162-4/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements section 5.3.6. of RFC6458, that is, support for 'SCTP Next Receive Information Structure' (SCTP_NXTINFO) which is placed into ancillary data cmsghdr structure for each recvmsg() call, if this information is already available when delivering the current message. This option can be enabled/disabled via setsockopt(2) on SOL_SCTP level by setting an int value with 1/0 for SCTP_RECVNXTINFO in user space applications as per RFC6458, section 8.1.30. The sctp_nxtinfo structure is defined as per RFC as below ... struct sctp_nxtinfo { uint16_t nxt_sid; uint16_t nxt_flags; uint32_t nxt_ppid; uint32_t nxt_length; sctp_assoc_t nxt_assoc_id; }; ... and provided under cmsg_level IPPROTO_SCTP, cmsg_type SCTP_NXTINFO, while cmsg_data[] contains struct sctp_nxtinfo. Joint work with Daniel Borkmann. Signed-off-by: Geir Ola Vaagland <geirola@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: implement rfc6458, 5.3.5. SCTP_RCVINFO cmsg supportGeir Ola Vaagland2014-07-162-1/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements section 5.3.5. of RFC6458, that is, support for 'SCTP Receive Information Structure' (SCTP_RCVINFO) which is placed into ancillary data cmsghdr structure for each recvmsg() call. This option can be enabled/disabled via setsockopt(2) on SOL_SCTP level by setting an int value with 1/0 for SCTP_RECVRCVINFO in user space applications as per RFC6458, section 8.1.29. The sctp_rcvinfo structure is defined as per RFC as below ... struct sctp_rcvinfo { uint16_t rcv_sid; uint16_t rcv_ssn; uint16_t rcv_flags; <-- 2 bytes hole --> uint32_t rcv_ppid; uint32_t rcv_tsn; uint32_t rcv_cumtsn; uint32_t rcv_context; sctp_assoc_t rcv_assoc_id; }; ... and provided under cmsg_level IPPROTO_SCTP, cmsg_type SCTP_RCVINFO, while cmsg_data[] contains struct sctp_rcvinfo. An sctp_rcvinfo item always corresponds to the data in msg_iov. Joint work with Daniel Borkmann. Signed-off-by: Geir Ola Vaagland <geirola@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: implement rfc6458, 5.3.4. SCTP_SNDINFO cmsg supportGeir Ola Vaagland2014-07-161-20/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements section 5.3.4. of RFC6458, that is, support for 'SCTP Send Information Structure' (SCTP_SNDINFO) which can be placed into ancillary data cmsghdr structure for sendmsg() calls. The sctp_sndinfo structure is defined as per RFC as below ... struct sctp_sndinfo { uint16_t snd_sid; uint16_t snd_flags; uint32_t snd_ppid; uint32_t snd_context; sctp_assoc_t snd_assoc_id; }; ... and supplied under cmsg_level IPPROTO_SCTP, cmsg_type SCTP_SNDINFO, while cmsg_data[] contains struct sctp_sndinfo. An sctp_sndinfo item always corresponds to the data in msg_iov. Joint work with Daniel Borkmann. Signed-off-by: Geir Ola Vaagland <geirola@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-07-161-107/+15
|\| | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: fix information leaks in ulpevent layerDaniel Borkmann2014-07-141-107/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While working on some other SCTP code, I noticed that some structures shared with user space are leaking uninitialized stack or heap buffer. In particular, struct sctp_sndrcvinfo has a 2 bytes hole between .sinfo_flags and .sinfo_ppid that remains unfilled by us in sctp_ulpevent_read_sndrcvinfo() when putting this into cmsg. But also struct sctp_remote_error contains a 2 bytes hole that we don't fill but place into a skb through skb_copy_expand() via sctp_ulpevent_make_remote_error(). Both structures are defined by the IETF in RFC6458: * Section 5.3.2. SCTP Header Information Structure: The sctp_sndrcvinfo structure is defined below: struct sctp_sndrcvinfo { uint16_t sinfo_stream; uint16_t sinfo_ssn; uint16_t sinfo_flags; <-- 2 bytes hole --> uint32_t sinfo_ppid; uint32_t sinfo_context; uint32_t sinfo_timetolive; uint32_t sinfo_tsn; uint32_t sinfo_cumtsn; sctp_assoc_t sinfo_assoc_id; }; * 6.1.3. SCTP_REMOTE_ERROR: A remote peer may send an Operation Error message to its peer. This message indicates a variety of error conditions on an association. The entire ERROR chunk as it appears on the wire is included in an SCTP_REMOTE_ERROR event. Please refer to the SCTP specification [RFC4960] and any extensions for a list of possible error formats. An SCTP error notification has the following format: struct sctp_remote_error { uint16_t sre_type; uint16_t sre_flags; uint32_t sre_length; uint16_t sre_error; <-- 2 bytes hole --> sctp_assoc_t sre_assoc_id; uint8_t sre_data[]; }; Fix this by setting both to 0 before filling them out. We also have other structures shared between user and kernel space in SCTP that contains holes (e.g. struct sctp_paddrthlds), but we copy that buffer over from user space first and thus don't need to care about it in that cases. While at it, we can also remove lengthy comments copied from the draft, instead, we update the comment with the correct RFC number where one can look it up. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: remove unnecessary break after return/gotoFabian Frederick2014-07-162-5/+0
| | | | | | | | | | Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: Inline the functions from command.cDavid Laight2014-07-082-69/+1
| | | | | | | | | | | | | | | | | | | | sctp_init_cmd_seq() and sctp_next_cmd() are only called from one place. The call sequence for sctp_add_cmd_sf() is likely to be longer than the inlined code. With sctp_add_cmd_sf() inlined the compiler can optimise repeated calls. Signed-off-by: David Laight <david.laight@aculab.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: only warn in proc_sctp_do_alpha_beta if writeDaniel Borkmann2014-07-031-2/+3
| | | | | | | | | | | | | | | | | | | | Only warn if the value is written to alpha or beta. We don't care emitting a one-time warning when only reading it. Reported-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: improve timer slack calculation for transport HBsDaniel Borkmann2014-07-031-8/+9
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RFC4960, section 8.3 says: On an idle destination address that is allowed to heartbeat, it is recommended that a HEARTBEAT chunk is sent once per RTO of that destination address plus the protocol parameter 'HB.interval', with jittering of +/- 50% of the RTO value, and exponential backoff of the RTO if the previous HEARTBEAT is unanswered. Currently, we calculate jitter via sctp_jitter() function first, and then add its result to the current RTO for the new timeout: TMO = RTO + (RAND() % RTO) - (RTO / 2) `------------------------^-=> sctp_jitter() Instead, we can just simplify all this by directly calculating: TMO = (RTO / 2) + (RAND() % RTO) With the help of prandom_u32_max(), we don't need to open code our own global PRNG, but can instead just make use of the per CPU implementation of prandom with better quality numbers. Also, we can now spare us the conditional for divide by zero check since no div or mod operation needs to be used. Note that prandom_u32_max() won't emit the same result as a mod operation, but we really don't care here as we only want to have a random number scaled into RTO interval. Note, exponential RTO backoff is handeled elsewhere, namely in sctp_do_8_2_transport_strike(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: check proc_dointvec result in proc_sctp_do_authDaniel Borkmann2014-06-201-2/+1
| | | | | | | | | | | | | | | | | | | | | When writing to the sysctl field net.sctp.auth_enable, it can well be that the user buffer we handed over to proc_dointvec() via proc_sctp_do_auth() handler contains something other than integers. In that case, we would set an uninitialized 4-byte value from the stack to net->sctp.auth_enable that can be leaked back when reading the sysctl variable, and it can unintentionally turn auth_enable on/off based on the stack content since auth_enable is interpreted as a boolean. Fix it up by making sure proc_dointvec() returned sucessfully. Fixes: b14878ccb7fa ("net: sctp: cache auth_enable per endpoint") Reported-by: Florian Westphal <fwestpha@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: propagate sysctl errors from proc_do* properlyDaniel Borkmann2014-06-191-20/+23
| | | | | | | | | | | | | | | | | | | | | | sysctl handler proc_sctp_do_hmac_alg(), proc_sctp_do_rto_min() and proc_sctp_do_rto_max() do not properly reflect some error cases when writing values via sysctl from internal proc functions such as proc_dointvec() and proc_dostring(). In all these cases we pass the test for write != 0 and partially do additional work just to notice that additional sanity checks fail and we return with hard-coded -EINVAL while proc_do* functions might also return different errors. So fix this up by simply testing a successful return of proc_do* right after calling it. This also allows to propagate its return value onwards to the user. While touching this, also fix up some minor style issues. Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl") Fixes: 3c68198e7511 ("sctp: Make hmac algorithm selection for cookie generation dynamic") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: fix permissions for rto_alpha and rto_beta knobsDaniel Borkmann2014-06-151-4/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3fd091e73b81 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") has silently changed permissions for rto_alpha and rto_beta knobs from 0644 to 0444. The purpose of this was to discourage users from tweaking rto_alpha and rto_beta knobs in production environments since they are key to correctly compute rtt/srtt. RFC4960 under section 6.3.1. RTO Calculation says regarding rto_alpha and rto_beta under rule C3 and C4: [...] C3) When a new RTT measurement R' is made, set RTTVAR <- (1 - RTO.Beta) * RTTVAR + RTO.Beta * |SRTT - R'| and SRTT <- (1 - RTO.Alpha) * SRTT + RTO.Alpha * R' Note: The value of SRTT used in the update to RTTVAR is its value before updating SRTT itself using the second assignment. After the computation, update RTO <- SRTT + 4 * RTTVAR. C4) When data is in flight and when allowed by rule C5 below, a new RTT measurement MUST be made each round trip. Furthermore, new RTT measurements SHOULD be made no more than once per round trip for a given destination transport address. There are two reasons for this recommendation: First, it appears that measuring more frequently often does not in practice yield any significant benefit [ALLMAN99]; second, if measurements are made more often, then the values of RTO.Alpha and RTO.Beta in rule C3 above should be adjusted so that SRTT and RTTVAR still adjust to changes at roughly the same rate (in terms of how many round trips it takes them to reflect new values) as they would if making only one measurement per round-trip and using RTO.Alpha and RTO.Beta as given in rule C3. However, the exact nature of these adjustments remains a research issue. [...] While it is discouraged to adjust rto_alpha and rto_beta and not further specified how to adjust them, the RFC also doesn't explicitly forbid it, but rather gives a RECOMMENDED default value (rto_alpha=3, rto_beta=2). We have a couple of users relying on the old permissions before they got changed. That said, if someone really has the urge to adjust them, we could allow it with a warning in the log. Fixes: 3fd091e73b81 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Fix sk_ack_backlog wrap-around problemXufeng Zhang2014-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | Consider the scenario: For a TCP-style socket, while processing the COOKIE_ECHO chunk in sctp_sf_do_5_1D_ce(), after it has passed a series of sanity check, a new association would be created in sctp_unpack_cookie(), but afterwards, some processing maybe failed, and sctp_association_free() will be called to free the previously allocated association, in sctp_association_free(), sk_ack_backlog value is decremented for this socket, since the initial value for sk_ack_backlog is 0, after the decrement, it will be 65535, a wrap-around problem happens, and if we want to establish new associations afterward in the same socket, ABORT would be triggered since sctp deem the accept queue as full. Fix this issue by only decrementing sk_ack_backlog for associations in the endpoint's list. Fix-suggested-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: fix incorrect type in gfp initializerDaniel Borkmann2014-06-111-1/+1
| | | | | | | | | | | This fixes the following sparse warning: net/sctp/associola.c:1556:29: warning: incorrect type in initializer (different base types) net/sctp/associola.c:1556:29: expected bool [unsigned] [usertype] preload net/sctp/associola.c:1556:29: got restricted gfp_t Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: improve sctp_select_active_and_retran_path selectionDaniel Borkmann2014-06-111-5/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In function sctp_select_active_and_retran_path(), we walk the transport list in order to look for the two most recently used ACTIVE transports (trans_pri, trans_sec). In case we didn't find anything ACTIVE, we currently just camp on a possibly PF or INACTIVE transport that is primary path; this behavior actually dates back to linux-history tree of the very early days of lksctp, and can yield a behavior that chooses suboptimal transport paths. Instead, be a bit more clever by reusing and extending the recently introduced sctp_trans_elect_best() handler. In case both transports are evaluated to have the same score resulting from their states, break the tie by looking at: 1) transport patch error count 2) last_time_heard value from each transport. This is analogous to Nishida's Quick Failover draft [1], section 5.1, 3: The sender SHOULD avoid data transmission to PF destinations. When all destinations are in either PF or Inactive state, the sender MAY either move the destination from PF to active state (and transmit data to the active destination) or the sender MAY transmit data to a PF destination. In the former scenario, (i) the sender MUST NOT notify the ULP about the state transition, and (ii) MUST NOT clear the destination's error counter. It is recommended that the sender picks the PF destination with least error count (fewest consecutive timeouts) for data transmission. In case of a tie (multiple PF destinations with same error count), the sender MAY choose the last active destination. Thus for sctp_select_active_and_retran_path(), we keep track of the best, if any, transport that is in PF state and in case no ACTIVE transport has been found (hence trans_{pri,sec} is NULL), we select the best out of the three: current primary_path and retran_path as well as a possible PF transport. The secondary may still camp on the original primary_path as before. The change in sctp_trans_elect_best() with a more fine grained tie selection also improves at the same time path selection for sctp_assoc_update_retran_path() in case of non-ACTIVE states. [1] http://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: migrate most recently used transport to ktimeDaniel Borkmann2014-06-113-5/+7
| | | | | | | | | | | Be more precise in transport path selection and use ktime helpers instead of jiffies to compare and pick the better primary and secondary recently used transports. This also avoids any side-effects during a possible roll-over, and could lead to better path decision-making. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: refactor active path selectionDaniel Borkmann2014-06-111-59/+61
| | | | | | | | | | This patch just refactors and moves the code for the active path selection into its own helper function outside of sctp_assoc_control_transport() which is already big enough. No functional changes here. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ktime: add ktime_after and ktime_before helperDaniel Borkmann2014-06-111-1/+1
| | | | | | | | Add two minimal helper functions analogous to time_before() and time_after() that will later on both be needed by SCTP code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Split sk_no_check into sk_no_check_{rx,tx}Tom Herbert2014-05-231-1/+2
| | | | | | | | | | Define separate fields in the sock structure for configuring disabling checksums in both TX and RX-- sk_no_check_tx and sk_no_check_rx. The SO_NO_CHECK socket option only affects sk_no_check_tx. Also, removed UDP_CSUM_* defines since they are no longer necessary. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Eliminate no_check from protoswTom Herbert2014-05-232-4/+0
| | | | | | | | | | It doesn't seem like an protocols are setting anything other than the default, and allowing to arbitrarily disable checksums for a whole protocol seems dangerous. This can be done on a per socket basis. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* snmp: fix some left over of snmp statsWANG Cong2014-05-141-1/+1
| | | | | | | | | | | | | | Fengguang reported the following sparse warning: >> net/ipv6/proc.c:198:41: sparse: incorrect type in argument 1 (different address spaces) net/ipv6/proc.c:198:41: expected void [noderef] <asn:3>*mib net/ipv6/proc.c:198:41: got void [noderef] <asn:3>**pcpumib Fixes: commit 698365fa1874aa7635d51667a3 (net: clean up snmp stats code) Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: make ip_local_reserved_ports per netnsWANG Cong2014-05-141-2/+3
| | | | | | | | | | | | ip_local_port_range is already per netns, so should ip_local_reserved_ports be. And since it is none by default we don't actually need it when we don't enable CONFIG_SYSCTL. By the way, rename inet_is_reserved_local_port() to inet_is_local_reserved_port() Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: rename local_df to ignore_dfWANG Cong2014-05-122-2/+2
| | | | | | | | | | | | | As suggested by several people, rename local_df to ignore_df, since it means "ignore df bit if it is set". Cc: Maciej Żenczykowski <maze@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-05-122-5/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: Don't transition to PF state when transport has exhausted ↵Karl Heiss2014-04-281-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'Path.Max.Retrans'. Don't transition to the PF state on every strike after 'Path.Max.Retrans'. Per draft-ietf-tsvwg-sctp-failover-03 Section 5.1.6: Additional (PMR - PFMR) consecutive timeouts on a PF destination confirm the path failure, upon which the destination transitions to the Inactive state. As described in [RFC4960], the sender (i) SHOULD notify ULP about this state transition, and (ii) transmit heartbeats to the Inactive destination at a lower frequency as described in Section 8.3 of [RFC4960]. This also prevents sending SCTP_ADDR_UNREACHABLE to the user as the state bounces between SCTP_INACTIVE and SCTP_PF for each subsequent strike. Signed-off-by: Karl Heiss <kheiss@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: reset flowi4_oif parameter on route lookupXufeng Zhang2014-04-281-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 813b3b5db83 (ipv4: Use caller's on-stack flowi as-is in output route lookups.) introduces another regression which is very similar to the problem of commit e6b45241c (ipv4: reset flowi parameters on route connect) wants to fix: Before we call ip_route_output_key() in sctp_v4_get_dst() to get a dst that matches a bind address as the source address, we have already called this function previously and the flowi parameters have been initialized including flowi4_oif, so when we call this function again, the process in __ip_route_output_key() will be different because of the setting of flowi4_oif, and we'll get a networking device which corresponds to the inputted flowi4_oif as the output device, this is wrong because we'll never hit this place if the previously returned source address of dst match one of the bound addresses. To reproduce this problem, a vlan setting is enough: # ifconfig eth0 up # route del default # vconfig add eth0 2 # vconfig add eth0 3 # ifconfig eth0.2 10.0.1.14 netmask 255.255.255.0 # route add default gw 10.0.1.254 dev eth0.2 # ifconfig eth0.3 10.0.0.14 netmask 255.255.255.0 # ip rule add from 10.0.0.14 table 4 # ip route add table 4 default via 10.0.0.254 src 10.0.0.14 dev eth0.3 # sctp_darn -H 10.0.0.14 -P 36422 -h 10.1.4.134 -p 36422 -s -I You'll detect that all the flow are routed to eth0.2(10.0.1.254). Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: add a checking for sctp_sysctl_net_registerwangweidong2014-05-091-0/+4
| | | | | | | | | | | | | | | | When register_net_sysctl failed, we should free the sysctl_table. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Revert "sctp: optimize the sctp_sysctl_net_register"wangweidong2014-05-091-10/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This revert commit efb842c45("sctp: optimize the sctp_sysctl_net_register"), Since it doesn't kmemdup a sysctl_table for init_net, so the init_net->sctp.sysctl_header->ctl_table_arg points to sctp_net_table which is a static array pointer. So when doing sctp_sysctl_net_unregister, it will free sctp_net_table, then we will get a NULL pointer dereference like that: [ 262.948220] BUG: unable to handle kernel NULL pointer dereference at 000000000000006c [ 262.948232] IP: [<ffffffff81144b70>] kfree+0x80/0x420 [ 262.948260] PGD db80a067 PUD dae12067 PMD 0 [ 262.948268] Oops: 0000 [#1] SMP [ 262.948273] Modules linked in: sctp(-) crc32c_generic libcrc32c ... [ 262.948338] task: ffff8800db830190 ti: ffff8800dad00000 task.ti: ffff8800dad00000 [ 262.948344] RIP: 0010:[<ffffffff81144b70>] [<ffffffff81144b70>] kfree+0x80/0x420 [ 262.948353] RSP: 0018:ffff8800dad01d88 EFLAGS: 00010046 [ 262.948358] RAX: 0100000000000000 RBX: ffffffffa0227940 RCX: ffffea0000707888 [ 262.948363] RDX: ffffea0000707888 RSI: 0000000000000001 RDI: ffffffffa0227940 [ 262.948369] RBP: ffff8800dad01de8 R08: 0000000000000000 R09: ffff8800d9e983a9 [ 262.948374] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0227940 [ 262.948380] R13: ffffffff8187cfc0 R14: 0000000000000000 R15: ffffffff8187da10 [ 262.948386] FS: 00007fa2a2658700(0000) GS:ffff880112800000(0000) knlGS:0000000000000000 [ 262.948394] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 262.948400] CR2: 000000000000006c CR3: 00000000cddc0000 CR4: 00000000000006e0 [ 262.948410] Stack: [ 262.948413] ffff8800dad01da8 0000000000000286 0000000020227940 ffffffffa0227940 [ 262.948422] ffff8800dad01dd8 ffffffff811b7fa1 ffffffffa0227940 ffffffffa0227940 [ 262.948431] ffffffff8187d960 ffffffff8187cfc0 ffffffff8187d960 ffffffff8187da10 [ 262.948440] Call Trace: [ 262.948457] [<ffffffff811b7fa1>] ? unregister_sysctl_table+0x51/0xa0 [ 262.948476] [<ffffffffa020d1a1>] sctp_sysctl_net_unregister+0x21/0x30 [sctp] [ 262.948490] [<ffffffffa020ef6d>] sctp_net_exit+0x12d/0x150 [sctp] [ 262.948512] [<ffffffff81394f49>] ops_exit_list+0x39/0x60 [ 262.948522] [<ffffffff813951ed>] unregister_pernet_operations+0x3d/0x70 [ 262.948530] [<ffffffff81395292>] unregister_pernet_subsys+0x22/0x40 [ 262.948544] [<ffffffffa020efcc>] sctp_exit+0x3c/0x12d [sctp] [ 262.948562] [<ffffffff810c5e04>] SyS_delete_module+0x194/0x210 [ 262.948577] [<ffffffff81240fde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 262.948587] [<ffffffff815217a2>] system_call_fastpath+0x16/0x1b With this revert, it won't occur the Oops. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: clean up snmp stats codeWANG Cong2014-05-071-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8f0ea0fe3a036a47767f9c80e (snmp: reduce percpu needs by 50%) reduced snmp array size to 1, so technically it doesn't have to be an array any more. What's more, after the following commit: commit 933393f58fef9963eac61db8093689544e29a600 Date: Thu Dec 22 11:58:51 2011 -0600 percpu: Remove irqsafe_cpu_xxx variants We simply say that regular this_cpu use must be safe regardless of preemption and interrupt state. That has no material change for x86 and s390 implementations of this_cpu operations. However, arches that do not provide their own implementation for this_cpu operations will now get code generated that disables interrupts instead of preemption. probably no arch wants to have SNMP_ARRAY_SZ == 2. At least after almost 3 years, no one complains. So, just convert the array to a single pointer and remove snmp_mib_init() and snmp_mib_free() as well. Cc: Christoph Lameter <cl@linux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: add support for busy polling to sctp protocolNeil Horman2014-04-212-0/+9
|/ | | | | | | | | | | | | | | | The busy polling socket option adds support for sockets to busy wait on data arriving on the napi queue from which they have most recently received a frame. Currently only tcp and udp support this feature, but theres no reason sctp can't do so as well. Add it in so appliations can take advantage of it Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: Daniel Borkmann <dborkman@redhat.com> CC: netdev@vger.kernel.org Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: cache auth_enable per endpointVlad Yasevich2014-04-196-59/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, it is possible to create an SCTP socket, then switch auth_enable via sysctl setting to 1 and crash the system on connect: Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.1-mipsgit-20140415 #1 task: ffffffff8056ce80 ti: ffffffff8055c000 task.ti: ffffffff8055c000 [...] Call Trace: [<ffffffff8043c4e8>] sctp_auth_asoc_set_default_hmac+0x68/0x80 [<ffffffff8042b300>] sctp_process_init+0x5e0/0x8a4 [<ffffffff8042188c>] sctp_sf_do_5_1B_init+0x234/0x34c [<ffffffff804228c8>] sctp_do_sm+0xb4/0x1e8 [<ffffffff80425a08>] sctp_endpoint_bh_rcv+0x1c4/0x214 [<ffffffff8043af68>] sctp_rcv+0x588/0x630 [<ffffffff8043e8e8>] sctp6_rcv+0x10/0x24 [<ffffffff803acb50>] ip6_input+0x2c0/0x440 [<ffffffff8030fc00>] __netif_receive_skb_core+0x4a8/0x564 [<ffffffff80310650>] process_backlog+0xb4/0x18c [<ffffffff80313cbc>] net_rx_action+0x12c/0x210 [<ffffffff80034254>] __do_softirq+0x17c/0x2ac [<ffffffff800345e0>] irq_exit+0x54/0xb0 [<ffffffff800075a4>] ret_from_irq+0x0/0x4 [<ffffffff800090ec>] rm7k_wait_irqoff+0x24/0x48 [<ffffffff8005e388>] cpu_startup_entry+0xc0/0x148 [<ffffffff805a88b0>] start_kernel+0x37c/0x398 Code: dd0900b8 000330f8 0126302d <dcc60000> 50c0fff1 0047182a a48306a0 03e00008 00000000 ---[ end trace b530b0551467f2fd ]--- Kernel panic - not syncing: Fatal exception in interrupt What happens while auth_enable=0 in that case is, that ep->auth_hmacs is initialized to NULL in sctp_auth_init_hmacs() when endpoint is being created. After that point, if an admin switches over to auth_enable=1, the machine can crash due to NULL pointer dereference during reception of an INIT chunk. When we enter sctp_process_init() via sctp_sf_do_5_1B_init() in order to respond to an INIT chunk, the INIT verification succeeds and while we walk and process all INIT params via sctp_process_param() we find that net->sctp.auth_enable is set, therefore do not fall through, but invoke sctp_auth_asoc_set_default_hmac() instead, and thus, dereference what we have set to NULL during endpoint initialization phase. The fix is to make auth_enable immutable by caching its value during endpoint initialization, so that its original value is being carried along until destruction. The bug seems to originate from the very first days. Fix in joint work with Daniel Borkmann. Reported-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: add a sock pointer to ip_queue_xmit()Eric Dumazet2014-04-151-1/+1
| | | | | | | | | | | | | | | | ip_queue_xmit() assumes the skb it has to transmit is attached to an inet socket. Commit 31c70d5956fc ("l2tp: keep original skb ownership") changed l2tp to not change skb ownership and thus broke this assumption. One fix is to add a new 'struct sock *sk' parameter to ip_queue_xmit(), so that we do not assume skb->sk points to the socket used by l2tp tunnel. Fixes: 31c70d5956fc ("l2tp: keep original skb ownership") Reported-by: Zhan Jianyu <nasa4836@gmail.com> Tested-by: Zhan Jianyu <nasa4836@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the ↵Daniel Borkmann2014-04-144-24/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | receiver's buffer" This reverts commit ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer") as it introduced a serious performance regression on SCTP over IPv4 and IPv6, though a not as dramatic on the latter. Measurements are on 10Gbit/s with ixgbe NICs. Current state: [root@Lab200slot2 ~]# iperf3 --sctp -4 -c 192.168.241.3 -V -l 1452 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0 #1 SMP Thu Apr 3 23:18:29 EDT 2014 x86_64 Time: Fri, 11 Apr 2014 17:56:21 GMT Connecting to host 192.168.241.3, port 5201 Cookie: Lab200slot2.1397238981.812898.548918 [ 4] local 192.168.241.2 port 38616 connected to 192.168.241.3 port 5201 Starting Test: protocol: SCTP, 1 streams, 1452 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.09 sec 20.8 MBytes 161 Mbits/sec [ 4] 1.09-2.13 sec 10.8 MBytes 86.8 Mbits/sec [ 4] 2.13-3.15 sec 3.57 MBytes 29.5 Mbits/sec [ 4] 3.15-4.16 sec 4.33 MBytes 35.7 Mbits/sec [ 4] 4.16-6.21 sec 10.4 MBytes 42.7 Mbits/sec [ 4] 6.21-6.21 sec 0.00 Bytes 0.00 bits/sec [ 4] 6.21-7.35 sec 34.6 MBytes 253 Mbits/sec [ 4] 7.35-11.45 sec 22.0 MBytes 45.0 Mbits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-12.51 sec 16.0 MBytes 126 Mbits/sec [ 4] 12.51-13.59 sec 20.3 MBytes 158 Mbits/sec [ 4] 13.59-14.65 sec 13.4 MBytes 107 Mbits/sec [ 4] 14.65-16.79 sec 33.3 MBytes 130 Mbits/sec [ 4] 16.79-16.79 sec 0.00 Bytes 0.00 bits/sec [ 4] 16.79-17.82 sec 5.94 MBytes 48.7 Mbits/sec (etc) [root@Lab200slot2 ~]# iperf3 --sctp -6 -c 2001:db8:0:f101::1 -V -l 1400 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0 #1 SMP Thu Apr 3 23:18:29 EDT 2014 x86_64 Time: Fri, 11 Apr 2014 19:08:41 GMT Connecting to host 2001:db8:0:f101::1, port 5201 Cookie: Lab200slot2.1397243321.714295.2b3f7c [ 4] local 2001:db8:0:f101::2 port 55804 connected to 2001:db8:0:f101::1 port 5201 Starting Test: protocol: SCTP, 1 streams, 1400 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 169 MBytes 1.42 Gbits/sec [ 4] 1.00-2.00 sec 201 MBytes 1.69 Gbits/sec [ 4] 2.00-3.00 sec 188 MBytes 1.58 Gbits/sec [ 4] 3.00-4.00 sec 174 MBytes 1.46 Gbits/sec [ 4] 4.00-5.00 sec 165 MBytes 1.39 Gbits/sec [ 4] 5.00-6.00 sec 199 MBytes 1.67 Gbits/sec [ 4] 6.00-7.00 sec 163 MBytes 1.36 Gbits/sec [ 4] 7.00-8.00 sec 174 MBytes 1.46 Gbits/sec [ 4] 8.00-9.00 sec 193 MBytes 1.62 Gbits/sec [ 4] 9.00-10.00 sec 196 MBytes 1.65 Gbits/sec [ 4] 10.00-11.00 sec 157 MBytes 1.31 Gbits/sec [ 4] 11.00-12.00 sec 175 MBytes 1.47 Gbits/sec [ 4] 12.00-13.00 sec 192 MBytes 1.61 Gbits/sec [ 4] 13.00-14.00 sec 199 MBytes 1.67 Gbits/sec (etc) After patch: [root@Lab200slot2 ~]# iperf3 --sctp -4 -c 192.168.240.3 -V -l 1452 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0+ #1 SMP Mon Apr 14 12:06:40 EDT 2014 x86_64 Time: Mon, 14 Apr 2014 16:40:48 GMT Connecting to host 192.168.240.3, port 5201 Cookie: Lab200slot2.1397493648.413274.65e131 [ 4] local 192.168.240.2 port 50548 connected to 192.168.240.3 port 5201 Starting Test: protocol: SCTP, 1 streams, 1452 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 240 MBytes 2.02 Gbits/sec [ 4] 1.00-2.00 sec 239 MBytes 2.01 Gbits/sec [ 4] 2.00-3.00 sec 240 MBytes 2.01 Gbits/sec [ 4] 3.00-4.00 sec 239 MBytes 2.00 Gbits/sec [ 4] 4.00-5.00 sec 245 MBytes 2.05 Gbits/sec [ 4] 5.00-6.00 sec 240 MBytes 2.01 Gbits/sec [ 4] 6.00-7.00 sec 240 MBytes 2.02 Gbits/sec [ 4] 7.00-8.00 sec 239 MBytes 2.01 Gbits/sec With the reverted patch applied, the SCTP/IPv4 performance is back to normal on latest upstream for IPv4 and IPv6 and has same throughput as 3.4.2 test kernel, steady and interval reports are smooth again. Fixes: ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer") Reported-by: Peter Butler <pbutler@sonusnet.com> Reported-by: Dongsheng Song <dongsheng.song@gmail.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Peter Butler <pbutler@sonusnet.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nsn.com> Cc: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller2014-04-112-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: test if association is dead in sctp_wake_up_waitersDaniel Borkmann2014-04-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In function sctp_wake_up_waiters(), we need to involve a test if the association is declared dead. If so, we don't have any reference to a possible sibling association anymore and need to invoke sctp_write_space() instead, and normally walk the socket's associations and notify them of new wmem space. The reason for special casing is that otherwise, we could run into the following issue when a sctp_primitive_SEND() call from sctp_sendmsg() fails, and tries to flush an association's outq, i.e. in the following way: sctp_association_free() `-> list_del(&asoc->asocs) <-- poisons list pointer asoc->base.dead = true sctp_outq_free(&asoc->outqueue) `-> __sctp_outq_teardown() `-> sctp_chunk_free() `-> consume_skb() `-> sctp_wfree() `-> sctp_wake_up_waiters() <-- dereferences poisoned pointers if asoc->ep->sndbuf_policy=0 Therefore, only walk the list in an 'optimized' way if we find that the current association is still active. We could also use list_del_init() in addition when we call sctp_association_free(), but as Vlad suggests, we want to trap such bugs and thus leave it poisoned as is. Why is it safe to resolve the issue by testing for asoc->base.dead? Parallel calls to sctp_sendmsg() are protected under socket lock, that is lock_sock()/release_sock(). Only within that path under lock held, we're setting skb/chunk owner via sctp_set_owner_w(). Eventually, chunks are freed directly by an association still under that lock. So when traversing association list on destruction time from sctp_wake_up_waiters() via sctp_wfree(), a different CPU can't be running sctp_wfree() while another one calls sctp_association_free() as both happens under the same lock. Therefore, this can also not race with setting/testing against asoc->base.dead as we are guaranteed for this to happen in order, under lock. Further, Vlad says: the times we check asoc->base.dead is when we've cached an association pointer for later processing. In between cache and processing, the association may have been freed and is simply still around due to reference counts. We check asoc->base.dead under a lock, so it should always be safe to check and not race against sctp_association_free(). Stress-testing seems fine now, too. Fixes: cd253f9f357d ("net: sctp: wake up all assocs if sndbuf policy is per socket") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: wake up all assocs if sndbuf policy is per socketDaniel Borkmann2014-04-081-1/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCTP charges chunks for wmem accounting via skb->truesize in sctp_set_owner_w(), and sctp_wfree() respectively as the reverse operation. If a sender runs out of wmem, it needs to wait via sctp_wait_for_sndbuf(), and gets woken up by a call to __sctp_write_space() mostly via sctp_wfree(). __sctp_write_space() is being called per association. Although we assign sk->sk_write_space() to sctp_write_space(), which is then being done per socket, it is only used if send space is increased per socket option (SO_SNDBUF), as SOCK_USE_WRITE_QUEUE is set and therefore not invoked in sock_wfree(). Commit 4c3a5bdae293 ("sctp: Don't charge for data in sndbuf again when transmitting packet") fixed an issue where in case sctp_packet_transmit() manages to queue up more than sndbuf bytes, sctp_wait_for_sndbuf() will never be woken up again unless it is interrupted by a signal. However, a still remaining issue is that if net.sctp.sndbuf_policy=0, that is accounting per socket, and one-to-many sockets are in use, the reclaimed write space from sctp_wfree() is 'unfairly' handed back on the server to the association that is the lucky one to be woken up again via __sctp_write_space(), while the remaining associations are never be woken up again (unless by a signal). The effect disappears with net.sctp.sndbuf_policy=1, that is wmem accounting per association, as it guarantees a fair share of wmem among associations. Therefore, if we have reclaimed memory in case of per socket accounting, wake all related associations to a socket in a fair manner, that is, traverse the socket association list starting from the current neighbour of the association and issue a __sctp_write_space() to everyone until we end up waking ourselves. This guarantees that no association is preferred over another and even if more associations are taken into the one-to-many session, all receivers will get messages from the server and are not stalled forever on high load. This setting still leaves the advantage of per socket accounting in touch as an association can still use up global limits if unused by others. Fixes: 4eb701dfc618 ("[SCTP] Fix SCTP sendbuffer accouting.") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-03-152-7/+2
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/r8152.c drivers/net/xen-netback/netback.c Both the r8152 and netback conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: fix skb leakage in COOKIE ECHO path of chunk->auth_chunkDaniel Borkmann2014-03-062-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While working on ec0223ec48a9 ("net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable"), we noticed that there's a skb memory leakage in the error path. Running the same reproducer as in ec0223ec48a9 and by unconditionally jumping to the error label (to simulate an error condition) in sctp_sf_do_5_1D_ce() receive path lets kmemleak detector bark about the unfreed chunk->auth_chunk skb clone: Unreferenced object 0xffff8800b8f3a000 (size 256): comm "softirq", pid 0, jiffies 4294769856 (age 110.757s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 89 ab 75 5e d4 01 58 13 00 00 00 00 00 00 00 00 ..u^..X......... backtrace: [<ffffffff816660be>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8119f328>] kmem_cache_alloc+0xc8/0x210 [<ffffffff81566929>] skb_clone+0x49/0xb0 [<ffffffffa0467459>] sctp_endpoint_bh_rcv+0x1d9/0x230 [sctp] [<ffffffffa046fdbc>] sctp_inq_push+0x4c/0x70 [sctp] [<ffffffffa047e8de>] sctp_rcv+0x82e/0x9a0 [sctp] [<ffffffff815abd38>] ip_local_deliver_finish+0xa8/0x210 [<ffffffff815a64af>] nf_reinject+0xbf/0x180 [<ffffffffa04b4762>] nfqnl_recv_verdict+0x1d2/0x2b0 [nfnetlink_queue] [<ffffffffa04aa40b>] nfnetlink_rcv_msg+0x14b/0x250 [nfnetlink] [<ffffffff815a3269>] netlink_rcv_skb+0xa9/0xc0 [<ffffffffa04aa7cf>] nfnetlink_rcv+0x23f/0x408 [nfnetlink] [<ffffffff815a2bd8>] netlink_unicast+0x168/0x250 [<ffffffff815a2fa1>] netlink_sendmsg+0x2e1/0x3f0 [<ffffffff8155cc6b>] sock_sendmsg+0x8b/0xc0 [<ffffffff8155d449>] ___sys_sendmsg+0x369/0x380 What happens is that commit bbd0d59809f9 clones the skb containing the AUTH chunk in sctp_endpoint_bh_rcv() when having the edge case that an endpoint requires COOKIE-ECHO chunks to be authenticated: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- ------------------ AUTH; COOKIE-ECHO ----------------> <-------------------- COOKIE-ACK --------------------- When we enter sctp_sf_do_5_1D_ce() and before we actually get to the point where we process (and subsequently free) a non-NULL chunk->auth_chunk, we could hit the "goto nomem_init" path from an error condition and thus leave the cloned skb around w/o freeing it. The fix is to centrally free such clones in sctp_chunk_destroy() handler that is invoked from sctp_chunk_free() after all refs have dropped; and also move both kfree_skb(chunk->auth_chunk) there, so that chunk->auth_chunk is either NULL (since sctp_chunkify() allocs new chunks through kmem_cache_zalloc()) or non-NULL with a valid skb pointer. chunk->skb and chunk->auth_chunk are the only skbs in the sctp_chunk structure that need to be handeled. While at it, we should use consume_skb() for both. It is the same as dev_kfree_skb() but more appropriately named as we are not a device but a protocol. Also, this effectively replaces the kfree_skb() from both invocations into consume_skb(). Functions are the same only that kfree_skb() assumes that the frame was being dropped after a failure (e.g. for tools like drop monitor), usage of consume_skb() seems more appropriate in function sctp_chunk_destroy() though. Fixes: bbd0d59809f9 ("[SCTP]: Implement the receive and verification of AUTH chunk") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <yasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: remove NULL check in sctp_assoc_update_retran_pathDaniel Borkmann2014-03-131-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is basically just to let Coverity et al shut up. Remove an unneeded NULL check in sctp_assoc_update_retran_path(). It is safe to remove it, because in sctp_assoc_update_retran_path() we iterate over the list of transports, our own transport which is asoc->peer.retran_path included. In the iteration, we skip the list head element and transports in state SCTP_UNCONFIRMED. Such transports came from peer addresses received in INIT/INIT-ACK address parameters. They are not yet confirmed by a heartbeat and not available for data transfers. We know however that in the list of transports, even if it contains such elements, it at least contains our asoc->peer.retran_path as well, so even if next to that element, we only encounter SCTP_UNCONFIRMED transports, we are always going to fall back to asoc->peer.retran_path through sctp_trans_elect_best(), as that is for sure not SCTP_UNCONFIRMED as per fbdf501c9374 ("sctp: Do no select unconfirmed transports for retransmissions"). Whenever we call sctp_trans_elect_best() it will give us a non-NULL element back, and therefore when we break out of the loop, we are guaranteed to have a non-NULL transport pointer, and can remove the NULL check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-03-063-53/+90
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 13:22:02 +0100