summaryrefslogtreecommitdiffstats
path: root/net/wireless/sme.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* wifi: cfg80211: Fix validating BSS pointers in __cfg80211_connect_resultVeerendranath Jakkam2022-08-081-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Driver's SME is allowed to fill either BSSID or BSS pointers in struct cfg80211_connect_resp_params when indicating connect response but a check in __cfg80211_connect_result() is giving unnecessary warning when driver's SME fills only BSSID pointer and not BSS pointer in struct cfg80211_connect_resp_params. In case of mac80211 with auth/assoc path, it is always expected to fill BSS pointers in struct cfg80211_connect_resp_params when calling __cfg80211_connect_result() since cfg80211 must have hold BSS pointers in cfg80211_mlme_assoc(). So, skip the check for the drivers which support cfg80211 connect callback, for example with brcmfmac is one such driver which had the warning: WARNING: CPU: 5 PID: 514 at net/wireless/sme.c:786 __cfg80211_connect_result+0x2fc/0x5c0 [cfg80211] Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: efbabc116500 ("cfg80211: Indicate MLO connection info in connect and roam callbacks") Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> [kvalo@kernel.org: add more info to the commit log] Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220805135259.4126630-1-quic_vjakkam@quicinc.com
* wifi: cfg80211: set country_elem to NULLJohannes Berg2022-07-151-1/+1
| | | | | | | | | The link loop will always have a valid link so that it's always set, but static checkers don't always see that, so set it to NULL explicitly. Fixes: efbabc116500 ("cfg80211: Indicate MLO connection info in connect and roam callbacks") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-07-151-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * wifi: cfg80211: Allow P2P client interface to indicate port authorizationVinayak Yadawad2022-06-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | In case of 4way handshake offload, cfg80211_port_authorized enables driver to indicate successful 4way handshake to cfg80211 layer. Currently this path of port authorization is restricted to interface type NL80211_IFTYPE_STATION. This patch extends the use of port authorization API for P2P client as well. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Link: https://lore.kernel.org/r/ef25cb49fcb921df2e5d99e574f65e8a009cc52c.1655905440.git.vinayak.yadawad@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | cfg80211: Indicate MLO connection info in connect and roam callbacksVeerendranath Jakkam2022-06-201-106/+285
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MLO links used for connection with an MLD AP are decided by the driver in case of SME offloaded to driver. Add support for the drivers to indicate the information of links used for MLO connection in connect and roam callbacks, update the connected links information in wdev from connect/roam result sent by driver. Also, send the connected links information to userspace. Add a netlink flag attribute to indicate that userspace supports handling of MLO connection. Drivers must not do MLO connection when this flag is not set. This is to maintain backwards compatibility with older supplicant versions which doesn't have support for MLO connection. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: nl80211: support MLO in auth/assocJohannes Berg2022-06-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For authentication, we need the BSS, the link_id and the AP MLD address to create the link and station, (for now) the driver assigns a link address and sends the frame, the MLD address needs to be the address of the interface. For association, pass the list of BSSes that were selected for the MLO connection, along with extra per-STA profile elements, the AP MLD address and the link ID on which the association request should be sent. Note that for now we don't have a proper way to pass the link address(es) and so the driver/mac80211 will select one, but depending on how that selection works it means that assoc w/o auth data still being around (mac80211 implementation detail) the association won't necessarily work - so this will need to be extended in the future to sort out the link addressing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: cfg80211: simplify cfg80211_mlme_auth() prototypeJohannes Berg2022-06-201-7/+13
| | | | | | | | | | | | | | This function has far too many parameters now, move out the BSS lookup and pass the request struct instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: cfg80211: mlme: get BSS entry outside cfg80211_mlme_assoc()Johannes Berg2022-06-201-3/+12
| | | | | | | | | | | | | | | | | | Today it makes more sense to pass the necessary parameters to look up the BSS entry to cfg80211_mlme_assoc(), but with MLO we will need to look up multiple, and that gets awkward. Pull the lookup code into the callers so we can change it better. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: cfg80211: do some rework towards MLO link APIsJohannes Berg2022-06-201-48/+54
|/ | | | | | | | | | | | | | | | | | | | | | | | | In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: use ieee80211_bss_get_elem() instead of _get_ie()Johannes Berg2021-11-281-12/+10
| | | | | | | | Use the structured helper for finding an element instead of the unstructured ieee80211_bss_get_ie(). Link: https://lore.kernel.org/r/20210930131130.e94709f341c3.I4ddb7fcb40efca27987deda7f9a144a5702ebfae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: remove WARN_ON() in cfg80211_sme_connectDu Cheng2021-04-081-1/+1
| | | | | | | | | | | | | | A WARN_ON(wdev->conn) would trigger in cfg80211_sme_connect(), if multiple send_msg(NL80211_CMD_CONNECT) system calls are made from the userland, which should be anticipated and handled by the wireless driver. Remove this WARN_ON() to prevent kernel panic if kernel is configured to "panic_on_warn". Bug reported by syzbot. Reported-by: syzbot+5f9392825de654244975@syzkaller.appspotmail.com Signed-off-by: Du Cheng <ducheng2@gmail.com> Link: https://lore.kernel.org/r/20210407162756.6101-1-ducheng2@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: avoid holding the RTNL when calling the driverJohannes Berg2021-01-261-3/+2
| | | | | | | | | | | | | | | | | | | | | | Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* net: wireless: Convert to use the preferred fallthrough macroMiaohe Lin2020-08-271-2/+2
| | | | | | | | Convert the uses of fallthrough comments to fallthrough macro. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/20200822082323.45495-1-linmiaohe@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* net: wireless: sme.c: delete duplicated wordRandy Dunlap2020-08-271-1/+1
| | | | | | | | | | | Drop the repeated word "is". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-7-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long2020-08-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* nl80211: really allow client-only BIGTK supportJohannes Berg2020-05-311-2/+5
| | | | | | | | | My previous commit here was wrong, it didn't check the new flag in two necessary places, so things didn't work. Fix that. Fixes: 155d7c733807 ("nl80211: allow client-only BIGTK support") Link: https://lore.kernel.org/r/20200528213443.993f108e96ca.I0086ae42d672379380d04ac5effb2f3d5135731b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Unprotected Beacon frame RX indicationJouni Malinen2020-04-241-0/+2
| | | | | | | | | | | | | | Extend cfg80211_rx_unprot_mlme_mgmt() to cover indication of unprotected Beacon frames in addition to the previously used Deauthentication and Disassociation frames. The Beacon frame case is quite similar, but has couple of exceptions: this is used both with fully unprotected and also incorrectly protected frames and there is a rate limit on the events to avoid unnecessary flooding netlink events in case something goes wrong. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200401142548.6990-1-jouni@codeaurora.org [add missing kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Support key configuration for Beacon protection (BIGTK)Jouni Malinen2020-02-241-2/+9
| | | | | | | | | | | | | | | IEEE P802.11-REVmd/D3.0 adds support for protecting Beacon frames using a new set of keys (BIGTK; key index 6..7) similarly to the way group-addressed Robust Management frames are protected (IGTK; key index 4..5). Extend cfg80211 and nl80211 to allow the new BIGTK to be configured. Add an extended feature flag to indicate driver support for the new key index values to avoid array overflows in driver implementations and also to indicate to user space when this functionality is available. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200222132548.20835-2-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: fix deadlocks in autodisconnect workMarkus Theil2020-01-151-3/+3
| | | | | | | | | | Use methods which do not try to acquire the wdev lock themselves. Cc: stable@vger.kernel.org Fixes: 37b1c004685a3 ("cfg80211: Support all iftypes in autodisconnect_wk") Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200108115536.2262-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Handle bss expiry during connectionChaitanya Tata2019-05-281-4/+28
| | | | | | | | | | | | | | | | | | | | If the BSS is expired during connection, the connect result will trigger a kernel warning. Ideally cfg80211 should hold the BSS before the connection is attempted, but as the BSSID is not known in case of auth/assoc MLME offload (connect op) it doesn't. For those drivers without the connect op cfg80211 holds down the reference so it wil not be removed from list. Fix this by removing the warning and silently adding the BSS back to the bss list which is return by the driver (with proper BSSID set) or in case the BSS is already added use that. The requirements for drivers are documented in the API's. Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk> [formatting fixes, keep old timestamp] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: call disconnect_wk when AP stopsJohannes Berg2019-02-011-1/+1
| | | | | | | | | | | | | Since we now prevent regulatory restore during STA disconnect if concurrent AP interfaces are active, we need to reschedule this check when the AP state changes. This fixes never doing a restore when an AP is the last interface to stop. Or to put it another way: we need to re-check after anything we check here changes. Cc: stable@vger.kernel.org Fixes: 113f3aaa81bd ("cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Prevent regulatory restore during STA disconnect in concurrent ↵Sriram R2018-11-091-1/+5
| | | | | | | | | | | | | | | | | | | interfaces Currently when an AP and STA interfaces are active in the same or different radios, regulatory settings are restored whenever the STA disconnects. This restores all channel information including dfs states in all radios. For example, if an AP interface is active in one radio and STA in another, when radar is detected on the AP interface, the dfs state of the channel will be changed to UNAVAILABLE. But when the STA interface disconnects, this issues a regulatory disconnect hint which restores all regulatory settings in all the radios attached and thereby losing the stored dfs state on the other radio where the channel was marked as unavailable earlier. Hence prevent such regulatory restore whenever another active beaconing interface is present in the same or other radios. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add missing constraint for user-supplied VHT maskSergey Matyukevich2018-11-091-0/+2
| | | | | | | | | Do a logical vht_capa &= vht_capa_mask of user-supplied VHT mask with the driver-supplied mask of modifiable VHT capabilities. Fix whitespaces and comment typos. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: add FILS related parameters to ROAM eventArend Van Spriel2018-05-231-7/+41
| | | | | | | | | | In case of FILS shared key offload the parameters can change upon roaming of which user-space needs to be notified. Reviewed-by: Jithu Jance <jithu.jance@broadcom.com> Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: use separate struct for FILS parametersArend Van Spriel2018-05-231-19/+21
| | | | | | | | | | Put FILS related parameters into their own struct definition so it can be reused for roam events in subsequent change. Reviewed-by: Jithu Jance <jithu.jance@broadcom.com> Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Support all iftypes in autodisconnect_wkDenis Kenzior2018-03-291-11/+32
| | | | | | | | | Currently autodisconnect_wk assumes that only interface types of P2P_CLIENT and STATION use conn_owner_nlportid. Change this so all interface types are supported. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: clear wep keys after disconnectionAvraham Stern2018-02-191-0/+2
| | | | | | | | | | | | When a low level driver calls cfg80211_disconnected(), wep keys are not cleared. As a result, following connection requests will fail since cfg80211 internal state shows a connection is still in progress. Fix this by clearing the wep keys when disconnecting. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-11-041-0/+1
|\ | | | | | | | | | | | | Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds2017-11-021-0/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
| | * License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-10-301-9/+41
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several conflicts here. NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to nfp_fl_output() needed some adjustments because the code block is in an else block now. Parallel additions to net/pkt_cls.h and net/sch_generic.h A bug fix in __tcp_retransmit_skb() conflicted with some of the rbtree changes in net-next. The tc action RCU callback fixes in 'net' had some overlap with some of the recent tcf_block reworking. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cfg80211: fix connect/disconnect edge casesJohannes Berg2017-10-181-9/+41
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we try to connect while already connected/connecting, but this fails, we set ssid_len=0 but leave current_bss hanging, leading to errors. Check all of this better, first of all ensuring that we can't try to connect to a different SSID while connected/ing; ensure that prev_bssid is set for re-association attempts even in the case of the driver supporting the connect() method, and don't reset ssid_len in the failure cases. While at it, also reset ssid_len while disconnecting unless we were connected and expect a disconnected event, and warn on a successful connection without ssid_len being set. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* / cfg80211/nl80211: add a port authorized eventAvraham Stern2017-10-021-1/+44
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an event that indicates that a connection is authorized (i.e. the 4 way handshake was performed by the driver). This event should be sent by the driver after sending a connect/roamed event. This is useful for networks that require 802.1X authentication. In cases that the driver supports 4 way handshake offload, but the 802.1X authentication is managed by user space, the driver needs to inform user space right after the 802.11 association was completed so user space can initialize its 802.1X state machine etc. However, it is also possible that the AP will choose to skip the 802.1X authentication (e.g. when PMKSA caching is used) and proceed with the 4 way handshake immediately. In this case the driver needs to inform user space that 802.1X authentication is no longer required (e.g. to prevent user space from disconnecting since it did not get any EAPOLs from the AP). This is also useful for roaming, in which case it is possible that the driver used the Fast Transition protocol so 802.1X is not required. Since there will now be a dedicated notification indicating that the connection is authorized, the authorized flag can be removed from the roamed event. Drivers can send the new port authorized event right after sending the roamed event to indicate the new AP is already authorized. This therefore reserves the old PORT_AUTHORIZED attribute. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: add authorized flag to ROAM eventAvraham Stern2017-06-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Drivers that initiate roaming while being connected to a network that uses 802.1X authentication need to inform user space if 802.1X authentication is further required after roaming. For example, when using the Fast transition protocol, roaming within the mobility domain does not require new 802.1X authentication, but roaming to another mobility domain does. In addition, some drivers may not support 802.1X authentication (so it has to be done in user space), while other drivers do. Add a flag to the roaming notification to indicate if user space is required to do 802.1X authentication after the roaming or not. This flag will only be used for networks that use 802.1X authentication. For networks that do not use 802.1X authentication it is assumed that no further action is required from user space after the roaming notification. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [arend.vanspriel@broadcom.com reuse NL80211_ATTR_PORT_AUTHORIZED] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [rebase to apply w/o the flag in CONNECT] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: unify cfg80211_roamed() and cfg80211_roamed_bss()Avraham Stern2017-04-281-52/+38
| | | | | | | | | | | | | | | | cfg80211_roamed() and cfg80211_roamed_bss() take the same arguments except that cfg80211_roamed() requires the BSSID and cfg80211_roamed_bss() requires the bss entry. Unify the two functions by using a struct for driver initiated roaming information so that either the BSSID or the bss entry can be passed as an argument to the unified function. Signed-off-by: Avraham Stern <avraham.stern@intel.com> [modified the ath6k, brcm80211, rndis and wlan-ng drivers accordingly] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [modify brcmfmac to remove the useless cast, spotted by Arend] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Add support for FILS shared key authentication offloadVidyullatha Kanchanapally2017-03-311-1/+24
| | | | | | | | | | | | | | | | Enhance nl80211 and cfg80211 connect request and response APIs to support FILS shared key authentication offload. The new nl80211 attributes can be used to provide additional information to the driver to establish a FILS connection. Also enhance the set/del PMKSA to allow support for adding and deleting PMKSA based on FILS cache identifier. Add a new feature flag that drivers can use to advertize support for FILS shared key authentication and association in station mode when using their own SME. Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Use a structure to pass connect response paramsVidyullatha Kanchanapally2017-03-311-69/+80
| | | | | | | | | | | | Currently the connect event from driver takes all the connection response parameters as arguments. With support for new features these response parameters can grow. Use a structure to pass these parameters rather than passing them as function arguments. Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [add to documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Specify the reason for connect timeoutPurushottam Kushwaha2017-01-131-12/+27
| | | | | | | | | | | | This enhances the connect timeout API to also carry the reason for the timeout. These reason codes for the connect time out are represented by enum nl80211_timeout_reason and are passed to user space through a new attribute NL80211_ATTR_TIMEOUT_REASON (u32). Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [keep gfp_t argument last] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: NL80211_ATTR_SOCKET_OWNER support for CMD_CONNECTAndrzej Zaborowski2017-01-091-0/+33
| | | | | | | | | | | | | | | Disconnect or deauthenticate when the owning socket is closed if this flag is supplied to CMD_CONNECT or CMD_ASSOCIATE. This may be used to ensure userspace daemon doesn't leave an unmanaged connection behind. In some situations it would be possible to account for that, to some degree, in the deamon restart code or in the up/down scripts without the use of this attribute. But there will be systems where the daemon can go away for varying periods without a warning due to local resource management. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/mac80211: fix BSS leaks when abandoning assoc attemptsJohannes Berg2016-12-091-0/+14
| | | | | | | | | | | | | | | | | | | When mac80211 abandons an association attempt, it may free all the data structures, but inform cfg80211 and userspace about it only by sending the deauth frame it received, in which case cfg80211 has no link to the BSS struct that was used and will not cfg80211_unhold_bss() it. Fix this by providing a way to inform cfg80211 of this with the BSS entry passed, so that it can clean up properly, and use this ability in the appropriate places in mac80211. This isn't ideal: some code is more or less duplicated and tracing is missing. However, it's a fairly small change and it's thus easier to backport - cleanups can come later. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: allow aborting in-progress connection atttemptsIlan Peer2016-10-191-1/+1
| | | | | | | | | | | | | | | On a disconnect request from userspace, cfg80211 currently calls called rdev_disconnect() only in case that 'current_bss' was set, i.e. connection had been established. Change this to allow the userspace call to succeed and call the driver's disconnect() method also while the connection attempt is in progress, to be able to abort attempts. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [change commit subject/message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Add support for static WEP in the driverDavid Spinadel2016-09-301-1/+5
| | | | | | | | | Add support for drivers that implement static WEP internally, i.e. expose connection keys to the driver in connect flow and don't upload the keys after the connection. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: allow connect keys only with default (TX) keyJohannes Berg2016-09-151-0/+3
| | | | | | | | | | | | | There's no point in allowing connect keys when one of them isn't also configured as the TX key, it would just confuse drivers and probably cause them to pick something for TX. Disallow this confusing and erroneous configuration. As wpa_supplicant will always send NL80211_ATTR_KEYS, even when there are no keys inside, allow that and treat it as though the attribute isn't present at all. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Allow cfg80211_connect_result() errors to be distinguishedJouni Malinen2016-05-311-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Previously, the status parameter to cfg80211_connect_result() was documented as using WLAN_STATUS_UNSPECIFIED_FAILURE (1) when the real status code for the failure is not known. This value can be used by an AP (and often is) and as such, user space cannot distinguish between explicitly rejected authentication/association and not being able to even try to associate or not receiving a response from the AP. Add a new inline function, cfg80211_connect_timeout(), to be used when the driver knows that the connection attempt failed due to a reason where connection could not be attempt or no response was received from the AP. The internal functions now allow a negative status value (-1) to be used as an indication of this special case. This results in the NL80211_ATTR_TIMED_OUT to be added to the NL80211_CMD_CONNECT event to allow user space to determine this case was hit. For backwards compatibility, NL80211_STATUS_CODE with the value WLAN_STATUS_UNSPECIFIED_FAILURE is still indicated in the event in such a case. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [johannes: fix cfg80211_connect_bss() prototype to use int for status, add cfg80211_connect_timeout() to docbook, fix docbook] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: make wdev_list accessible to driversJohannes Berg2016-05-121-2/+2
| | | | | | | | There's no harm in having drivers read the list, since they can use RCU protection or RTNL locking; allow this to not require each and every driver to also implement its own bookkeeping. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Add option to report the bss entry in connect resultKanchanapally, Vidyullatha2016-04-261-6/+22
| | | | | | | | | | | | | | | | | | | Since cfg80211 maintains separate BSS table entries for APs if the same BSSID, SSID pair is seen on multiple channels, it is possible that it can map the current_bss to a BSS entry on the wrong channel. This current_bss will not get flushed unless disconnected and cfg80211 reports a wrong channel as the associated channel. Fix this by introducing a new cfg80211_connect_bss() function which is similar to cfg80211_connect_result(), but it includes an additional parameter: the bss the STA is connected to. This allows drivers to provide the exact bss entry that matches the BSS to which the connection was completed. Reviewed-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Sunil Dutt <usdutt@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: remove enum ieee80211_bandJohannes Berg2016-04-121-3/+3
| | | | | | | | | This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Allow reassociation to be requested with internal SMEJouni Malinen2016-04-061-2/+12
| | | | | | | | | | | If the user space issues a NL80211_CMD_CONNECT with NL80211_ATTR_PREV_BSSID when there is already a connection, allow this to proceed as a reassociation instead of rejecting the new connect command with EALREADY. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [validate prev_bssid] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Allow a scan request for a specific BSSIDJouni Malinen2016-04-051-0/+2
| | | | | | | | | | | | | | | This allows scans for a specific BSSID to be optimized by the user space application by requesting the driver to set the Probe Request frame BSSID field (Address 3) to the specified BSSID instead of the wildcard BSSID. This prevents other APs from replying which reduces airtime need and latency in getting the response from the target AP through. This is an optimization and as such, it is acceptable for some of the drivers not to support the mechanism. If not supported, the wildcard BSSID will be used and more responses may be received. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-03-081-0/+6
|\ | | | | | | | | | | | | | | Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 11:08:01 +0100