summaryrefslogtreecommitdiffstats
path: root/net/wireless (follow)
Commit message (Collapse)AuthorAgeFilesLines
* wifi: cfg80211: remove links only on APJohannes Berg2023-06-091-1/+8
| | | | | | | | | | | Since links are only controlled by userspace via cfg80211 in AP mode, also only remove them from the driver in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230608163202.ed65b94916fa.I2458c46888284cc5ce30715fe642bc5fc4340c8f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: fix link del callback to call correct handlerBenjamin Berg2023-06-091-3/+3
| | | | | | | | | | | | The wrapper function was incorrectly calling the add handler instead of the del handler. This had no negative side effect as the default handlers are essentially identical. Fixes: f2a0290b2df2 ("wifi: cfg80211: add optional link add/remove callbacks") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230608163202.ebd00e000459.Iaff7dc8d1cdecf77f53ea47a0e5080caa36ea02a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: fix double lock bug in reg_wdev_chan_valid()Dan Carpenter2023-06-091-3/+0
| | | | | | | | | | | The locking was changed recently so now the caller holds the wiphy_lock() lock. Taking the lock inside the reg_wdev_chan_valid() function will lead to a deadlock. Fixes: f7e60032c661 ("wifi: cfg80211: fix locking in regulatory disconnect") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/40c4114a-6cb4-4abf-b013-300b598aba65@moroto.mountain Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: fix locking in regulatory disconnectJohannes Berg2023-06-061-2/+2
| | | | | | | | | This should use wiphy_lock() now instead of requiring the RTNL, since __cfg80211_leave() via cfg80211_leave() is now requiring that lock to be held. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: fix locking in sched scan stop workJohannes Berg2023-06-061-2/+2
| | | | | | | | This should use wiphy_lock() now instead of acquiring the RTNL, since cfg80211_stop_sched_scan_req() now needs that. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: reject bad AP MLD addressJohannes Berg2023-06-061-0/+2
| | | | | | | | | | | | When trying to authenticate, if the AP MLD address isn't a valid address, mac80211 can throw a warning. Avoid that by rejecting such addresses. Fixes: d648c23024bd ("wifi: nl80211: support MLO in auth/assoc") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230604120651.89188912bd1d.I8dbc6c8ee0cb766138803eec59508ef4ce477709@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: Drop entries with invalid BSSIDs in RNRIlan Peer2023-05-161-1/+5
| | | | | | | | | | | Ignore AP information for entries that include an invalid BSSID in the TBTT information field, e.g., all zeros BSSIDs. Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230424103224.5e65d04d1448.Ic10c8577ae4a85272c407106c9d0a2ecb5372743@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds2023-04-271-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
| * Merge 6.3-rc5 into driver-core-nextGreg Kroah-Hartman2023-04-032-13/+15
| |\ | | | | | | | | | | | | | | | | | | We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | drivers: remove struct module * setting from struct classGreg Kroah-Hartman2023-03-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to manually set the owner of a struct class, as the registering function does it automatically, so remove all of the explicit settings from various drivers that did so as it is unneeded. This allows us to remove this pointer entirely from this structure going forward. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/20230313181843.1207845-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'wireless-next-2023-03-30' of ↵Jakub Kicinski2023-03-312-22/+107
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Major stack changes: * TC offload support for drivers below mac80211 * reduced neighbor report (RNR) handling for AP mode * mac80211 mesh fast-xmit and fast-rx support * support for another mesh A-MSDU format (seems nobody got the spec right) Major driver changes: Kalle moved the drivers that were just plain C files in drivers/net/wireless/ to legacy/ and virtual/ dirs. hwsim * multi-BSSID support * some FTM support ath11k * MU-MIMO parameters support * ack signal support for management packets rtl8xxxu * support for RTL8710BU aka RTL8188GU chips rtw89 * support for various newer firmware APIs ath10k * enabled threaded NAPI on WCN3990 iwlwifi * lots of work for multi-link/EHT (wifi7) * hardware timestamping support for some devices/firwmares * TX beacon protection on newer hardware * tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits) wifi: clean up erroneously introduced file wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del() wifi: iwlwifi: separate AP link management queues wifi: iwlwifi: mvm: free probe_resp_data later wifi: iwlwifi: bump FW API to 75 for AX devices wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta wifi: iwlwifi: mvm: send full STA during HW restart wifi: iwlwifi: mvm: rework active links counting wifi: iwlwifi: mvm: update mac config when assigning chanctx wifi: iwlwifi: mvm: use the correct link queue wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta wifi: iwlwifi: mvm: fix station link data leak wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link wifi: iwlwifi: mvm: use appropriate link for rate selection wifi: iwlwifi: mvm: use the new lockdep-checking macros wifi: iwlwifi: mvm: remove chanctx WARN_ON wifi: iwlwifi: mvm: avoid sending MAC context for idle wifi: iwlwifi: mvm: remove only link-specific AP keys wifi: iwlwifi: mvm: skip inactive links wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO ... ==================== Link: https://lore.kernel.org/r/20230330205612.921134-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | | wifi: nl80211: support advertising S1G capabilitiesKieran Frewen2023-03-301-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include S1G capabilities in netlink band info messages. Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com> Co-developed-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Link: https://lore.kernel.org/r/20230223212917.4010246-1-gilad.itzkovitch@virscient.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | wifi: nl80211: make nl80211_send_chandef non-staticJaewan Kim2023-03-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expose nl80211_send_chandef functionality for mac80211_hwsim or vendor netlink can use it where needed. Signed-off-by: Jaewan Kim <jaewan@google.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/20230322131637.2633968-3-jaewan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | cfg80211: support RNR for EMA APAloka Dixit2023-03-241-7/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of a nontransmitted BSSID profile, an EMA AP that transmits a Beacon frame carrying a partial list of nontransmitted BSSID profiles should include in the frame a Reduced Neighbor Report element carrying information for at least the nontransmitted BSSIDs that are not present in the Multiple BSSID element carried in that frame. Add new nested attribute NL80211_ATTR_EMA_RNR_ELEMS to support the above. Number of RNR elements must be more than or equal to the number of MBSSID elements. This attribute can be used only when EMA is enabled. Userspace is responsible for splitting the RNR into multiple elements such that each element excludes the non-transmitting profiles already included in the MBSSID element (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon will be generated by adding MBSSID and RNR elements at the same index. If the userspace provides more RNR elements than the number of MBSSID elements then these will be added in every EMA beacon. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230323113801.6903-2-quic_alokad@quicinc.com [Johannes: validate elements] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | wifi: mac80211: implement support for yet another mesh A-MSDU formatFelix Fietkau2023-03-221-13/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MT7996 hardware supports mesh A-MSDU subframes in hardware, but uses a big-endian length field Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/20230314095956.62085-7-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-03-182-13/+15
|\ \ \ \ | |/ / / |/| | / | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | net/wireless/nl80211.c b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy") cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping") https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au tools/testing/selftests/net/Makefile 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | Merge tag 'net-6.3-rc3' of ↵Linus Torvalds2023-03-171-11/+15
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wifi and ipsec. A little more changes than usual, but it's pretty normal for us that the rc3/rc4 PRs are oversized as people start testing in earnest. Possibly an extra boost from people deploying the 6.1 LTS but that's more of an unscientific hunch. Current release - regressions: - phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol() - virtio: vsock: don't use skbuff state to account credit - virtio: vsock: don't drop skbuff on copy failure - virtio_net: fix page_to_skb() miscalculating the memory size Current release - new code bugs: - eth: correct xdp_features after device reconfig - wifi: nl80211: fix the puncturing bitmap policy - net/mlx5e: flower: - fix raw counter initialization - fix missing error code - fix cloned flow attribute - ipa: - fix some register validity checks - fix a surprising number of bad offsets - kill FILT_ROUT_CACHE_CFG IPA register Previous releases - regressions: - tcp: fix bind() conflict check for dual-stack wildcard address - veth: fix use after free in XDP_REDIRECT when skb headroom is small - ipv4: fix incorrect table ID in IOCTL path - ipvlan: make skb->skb_iif track skb->dev for l3s mode - mptcp: - fix possible deadlock in subflow_error_report - fix UaFs when destroying unaccepted and listening sockets - dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290 Previous releases - always broken: - tcp: tcp_make_synack() can be called from process context, don't assume preemption is disabled when updating stats - netfilter: correct length for loading protocol registers - virtio_net: add checking sq is full inside xdp xmit - bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype change - phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number - eth: i40e: fix crash during reboot when adapter is in recovery mode - eth: ice: avoid deadlock on rtnl lock when auxiliary device plug/unplug meets bonding - dsa: mt7530: - remove now incorrect comment regarding port 5 - set PLL frequency and trgmii only when trgmii is used - eth: mtk_eth_soc: reset PCS state when changing interface types Misc: - ynl: another license adjustment - move the TCA_EXT_WARN_MSG attribute for tc action" * tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits) selftests: bonding: add tests for ether type changes bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change net: renesas: rswitch: Fix GWTSDIE register handling net: renesas: rswitch: Fix the output value of quote from rswitch_rx() ethernet: sun: add check for the mdesc_grab() net: ipa: fix some register validity checks net: ipa: kill FILT_ROUT_CACHE_CFG IPA register net: ipa: add two missing declarations net: ipa: reg: include <linux/bug.h> net: xdp: don't call notifiers during driver init net/sched: act_api: add specific EXT_WARN_MSG for tc action Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795 ynl: make the tooling check the license ynl: broaden the license even more tools: ynl: make definitions optional again hsr: ratelimit only when errors are printed qed/qed_mng_tlv: correctly zero out ->min instead of ->hour selftests: net: devlink_port_split.py: skip test if no suitable device available ...
| | * | wifi: cfg80211: fix MLO connection ownershipJohannes Berg2023-03-101-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When disconnecting from an MLO connection we need the AP MLD address, not an arbitrary BSSID. Fix the code to do that. Fixes: 9ecff10e82a5 ("wifi: nl80211: refactor BSS lookup in nl80211_associate()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.4c1b3b18980e.I008f070c7f3b8e8bde9278101ef9e40706a82902@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | wifi: nl80211: fix puncturing bitmap policyJohannes Berg2023-03-101-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was meant to be a u32, and while applying the patch I tried to use policy validation for it. However, not only did I copy/paste it to u8 instead of u32, but also used the policy range erroneously. Fix both of these issues. Fixes: d7c1a9a0ed18 ("wifi: nl80211: validate and configure puncturing bitmap") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | wifi: nl80211: fix NULL-ptr deref in offchan checkJohannes Berg2023-03-101-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If, e.g. in AP mode, the link was already created by userspace but not activated yet, it has a chandef but the chandef isn't valid and has no channel. Check for this and ignore this link. Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.71bd4803fbb9.Iee39c0f6c2d3a59a8227674dc55d52e38b1090cf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * / wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext"Hector Martin2023-03-131-2/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts part of commit 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext") This commit broke WPA offload by unconditionally clearing the crypto modes for non-WEP connections. Drop that part of the patch. Signed-off-by: Hector Martin <marcan@marcan.st> Reported-by: Ilya <me@0upti.me> Reported-and-tested-by: Janne Grunau <j@jannau.net> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Fixes: 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext") Cc: stable@kernel.org Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge tag 'wireless-next-2023-03-10' of ↵Jakub Kicinski2023-03-115-66/+158
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== wireless-next patches for 6.4 Major changes: cfg80211 * 6 GHz improvements * HW timestamping support * support for randomized auth/deauth TA for PASN privacy (also for mac80211) mac80211 * radiotap TLV and EHT support for the iwlwifi sniffer * HW timestamping support * per-link debugfs for multi-link brcmfmac * support for Apple (M1 Pro/Max) devices iwlwifi * support for a few new devices * EHT sniffer support rtw88 * better support for some SDIO devices (e.g. MAC address from efuse) rtw89 * HW scan support for 8852b * better support for 6 GHz scanning * tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (84 commits) wifi: iwlwifi: mvm: fix EOF bit reporting wifi: iwlwifi: Do not include radiotap EHT user info if not needed wifi: iwlwifi: mvm: add EHT RU allocation to radiotap wifi: iwlwifi: Update logs for yoyo reset sw changes wifi: iwlwifi: mvm: clean up duplicated defines wifi: iwlwifi: rs-fw: break out for unsupported bandwidth wifi: iwlwifi: Add support for B step of BnJ-Fm4 wifi: iwlwifi: mvm: make flush code a bit clearer wifi: iwlwifi: mvm: avoid UB shift of snif_queue wifi: iwlwifi: mvm: add primary 80 known for EHT radiotap wifi: iwlwifi: mvm: parse FW frame metadata for EHT sniffer mode wifi: iwlwifi: mvm: decode USIG_B1_B7 RU to nl80211 RU width wifi: iwlwifi: mvm: rename define to generic name wifi: iwlwifi: mvm: allow Microsoft to use TAS wifi: iwlwifi: mvm: add all EHT based on data0 info from HW wifi: iwlwifi: mvm: add EHT radiotap info based on rate_n_flags wifi: iwlwifi: mvm: add an helper function radiotap TLVs wifi: radiotap: separate vendor TLV into header/content wifi: iwlwifi: reduce verbosity of some logging events wifi: iwlwifi: Adding the code to get RF name for MsP device ... ==================== Link: https://lore.kernel.org/r/20230310120159.36518-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * wifi: nl80211: convert cfg80211_scan_request allocation to *_size macrosJacob Keller2023-03-071-12/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cfg80211_scan_request structure is followed by a flexible array member as well as several other arrays that are then stored into pointers in the structure. These are allocated currently using a simple sequence of multiplications. Replace the calculations with struct_size(), size_add(), and array_size() helper macros. These macros saturate the calculation at SIZE_MAX rather than overflowing. Note that we can't use flex_array_size() instead of array_size() because the fields are not arrays, but simple pointers. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230228162827.3876606-3-jacob.e.keller@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: nl80211: Add support for randomizing TA of auth and deauth framesVeerendranath Jakkam2023-03-071-19/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support to use a random local address in authentication and deauthentication frames sent to unassociated peer when the driver supports. The driver needs to configure receive behavior to accept frames with random transmit address specified in TX path authentication frames during the time of the frame exchange is pending and such frames need to be acknowledged similarly to frames sent to the local permanent address when this random address functionality is used. This capability allows use of randomized transmit address for PASN authentication frames to improve privacy of WLAN clients. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230112012415.167556-2-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: cfg80211/mac80211: report link ID on control port RXJohannes Berg2023-03-072-9/+17
| | | | | | | | | | | | | | | | | | For control port RX, report the link ID for MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.fe06dfc3791b.Iddcab94789cafe336417be406072ce8a6312fc2d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: nl80211: add a command to enable/disable HW timestampingAvraham Stern2023-03-073-0/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a command to enable and disable HW timestamping of TM and FTM frames. HW timestamping can be enabled for a specific mac address or for all addresses. The low level driver will indicate how many peers HW timestamping can be enabled concurrently, and this information will be passed to userspace. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.05678d7b1c17.Iccc08869ea8156f1c71a3111a47f86dd56234bd0@changeid [switch to needing netdev UP, minor edits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: wireless: cleanup unused function parametersMordechay Goodstein2023-03-071-16/+5
| | | | | | | | | | | | | | | | | | | | In the past ftype was used for deciding about 6G DUP beacon, but the logic was removed and ftype is not needed anymore. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.98d4761b809b.I255f5ecd77cb24fcf2f1641bb5833ea2d121296e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: wireless: correct primary channel validation on 6 GHzMordechay Goodstein2023-03-071-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check that beacon primary channel is in the range of 80 MHz (abs < 80) is invalid for 320 MHz since duplicate beacon transmit means that the AP transmits it on all the 20 MHz sub-channels: 9.4.2.249 HE Operation element - ... AP transmits Beacon frames in non-HT duplicate PPDU with a TXVECTOR parameter CH_BANDWIDTH value that is up to the BSS bandwidth. So in case of 320 MHz the DUP beacon can be in upper 160 for primary channel in the lower 160 giving possibly an absolute range of over 80 MHz. Also this check is redundant alltogether, if AP has a wrong primary channel in the beacon it's a faulty AP, and we would fail in next steps to connect. While at it, fix the frequency comparison to no longer compare between KHz and MHz, which was introduced by commit 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel"). Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.314faf725255.I5e27251ac558297553b590d3917a7b6d1aae0e74@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * wifi: wireless: return primary channel regardless of DUPMordechay Goodstein2023-03-071-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently in case DUP bit is not set we don't return the primary channel for 6 GHz Band, but the spec says that the DUP bit has no effect on this field: 9.4.2.249 HE Operation element: The Duplicate Beacon subfield is set to 1 if the AP transmits Beacon frames in non-HT duplicate PPDU with a TXVECTOR parameter CH_BANDWIDTH value that is up to the BSS bandwidth and is set to 0 otherwise. So remove the condition for returning primary channel based on DUP. Since the caller code already marks the signal as invalid in case the indicated frequency is not the tuned frequency, there's no need to additionally handle this case here since that's already true for duplicated beacons on the non-primary channel(s). Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.66d7f05f7d11.I5e0add054f72ede95611391b99804c61c40cc959@changeid [clarify commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | wifi: wext: warn about usage only onceJohannes Berg2023-02-261-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | Warn only once since the ratelimit parameters are still allowing too many messages to happen. This will no longer tell you all the different processes, but still gives a heads-up of sorts. Also modify the message to note that wext stops working for future Wi-Fi 7 hardware, this is already implemented in commit 4ca69027691a ("wifi: wireless: deny wireless extensions on MLO-capable devices") and is maybe of more relevance to users than the fact that we'd like to have wireless extensions deprecated. The issue with Wi-Fi 7 is that you can now have multiple connections to the same AP, so a whole bunch of things now become per link rather than per netdev, which can't really be handled in wireless extensions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230224135933.94104aeda1a0.Ie771c6a66d7d6c3cf67da5f3b0c66cea66fd514c@changeid
* wifi: cfg80211: Set SSID if it is not already setMarc Bornand2023-02-151-0/+17
| | | | | | | | | | | | | | | | | | When a connection was established without going through NL80211_CMD_CONNECT, the ssid was never set in the wireless_dev struct. Now we set it in __cfg80211_connect_result() when it is not already set. When using a userspace configuration that does not call cfg80211_connect() (can be checked with breakpoints in the kernel), this patch should allow `networkctl status device_name` to output the SSID instead of null. Cc: stable@vger.kernel.org Reported-by: Yohan Prod'homme <kernel@zoddo.fr> Fixes: 7b0a0e3c3a88 (wifi: cfg80211: do some rework towards MLO link APIs) Link: https://bugzilla.kernel.org/show_bug.cgi?id=216711 Signed-off-by: Marc Bornand <dev.mbornand@systemb.ch> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: call reg_notifier for self managed wiphy from driver hintWen Gong2023-02-141-0/+3
| | | | | | | | | | | | | | | Currently the regulatory driver does not call the regulatory callback reg_notifier for self managed wiphys. Sometimes driver needs cfg80211 to calculate the info of ieee80211_channel such as flags and power, and driver needs to get the info of ieee80211_channel after hint of driver, but driver does not know when calculation of the info of ieee80211_channel become finished, so add notify to driver in reg_process_self_managed_hint() from cfg80211 is a good way, then driver could get the correct info in callback of reg_notifier. Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Link: https://lore.kernel.org/r/20230201065313.27203-1-quic_wgong@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notifyLorenzo Bianconi2023-02-141-3/+3
| | | | | | | | | | Since cfg80211_bss_color_notify() is now always run in non-atomic context, get rid of gfp_t flags in the routine signature and always use GFP_KERNEL for netlink message allocation. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c687724e7b53556f7a2d9cbe3d11cdcf065cb687.1675255390.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: nl80211: Allow authentication frames and set keys on NAN interfaceVinay Gannevaram2023-02-141-1/+17
| | | | | | | | | | | | | | Wi-Fi Aware R4 specification defines NAN Pairing which uses PASN handshake to authenticate the peer and generate keys. Hence allow to register and transmit the PASN authentication frames on NAN interface and set the keys to driver or underlying modules on NAN interface. The driver needs to configure the feature flag NL80211_EXT_FEATURE_SECURE_NAN, which also helps userspace modules to know if the driver supports secure NAN. Signed-off-by: Vinay Gannevaram <quic_vganneva@quicinc.com> Link: https://lore.kernel.org/r/1675519179-24174-1-git-send-email-quic_vganneva@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: mac80211: add a workaround for receiving non-standard mesh A-MSDUFelix Fietkau2023-02-141-0/+32
| | | | | | | | | | | | | | | | | At least ath10k and ath11k supported hardware (maybe more) does not implement mesh A-MSDU aggregation in a standard compliant way. 802.11-2020 9.3.2.2.2 declares that the Mesh Control field is part of the A-MSDU header (and little-endian). As such, its length must not be included in the subframe length field. Hardware affected by this bug treats the mesh control field as part of the MSDU data and sets the length accordingly. In order to avoid packet loss, keep track of which stations are affected by this and take it into account when converting A-MSDU to 802.3 + mesh control packets. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: mac80211: fix receiving A-MSDU frames on mesh interfacesFelix Fietkau2023-02-141-44/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current mac80211 mesh A-MSDU receive path fails to parse A-MSDU packets on mesh interfaces, because it assumes that the Mesh Control field is always directly after the 802.11 header. 802.11-2020 9.3.2.2.2 Figure 9-70 shows that the Mesh Control field is actually part of the A-MSDU subframe header. This makes more sense, since it allows packets for multiple different destinations to be included in the same A-MSDU, as long as RA and TID are still the same. Another issue is the fact that the A-MSDU subframe length field was apparently accidentally defined as little-endian in the standard. In order to fix this, the mesh forwarding path needs happen at a different point in the receive path. ieee80211_data_to_8023_exthdr is changed to ignore the mesh control field and leave it in after the ethernet header. This also affects the source/dest MAC address fields, which now in the case of mesh point to the mesh SA/DA. ieee80211_amsdu_to_8023s is changed to deal with the endian difference and to add the Mesh Control length to the subframe length, since it's not covered by the MSDU length field. With these changes, the mac80211 will get the same packet structure for converted regular data packets and unpacked A-MSDU subframes. The mesh forwarding checks are now only performed after the A-MSDU decap. For locally received packets, the Mesh Control header is stripped away. For forwarded packets, a new 802.11 header gets added. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-4-nbd@nbd.name [fix fortify build error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: factor out bridge tunnel / RFC1042 header checkFelix Fietkau2023-02-141-16/+18
| | | | | | | | The same check is done in multiple places, unify it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: move A-MSDU check in ieee80211_data_to_8023_exthdrFelix Fietkau2023-02-141-2/+3
| | | | | | | | | When parsing the outer A-MSDU header, don't check for inner bridge tunnel or RFC1042 headers. This is handled by ieee80211_amsdu_to_8023s already. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: Allow action frames to be transmitted with link BSS in MLDRameshkumar Sundaram2023-02-141-1/+4
| | | | | | | | | | | | Currently action frames TX only with ML address as A3(BSSID) are allowed in an ML AP, but TX for a non-ML Station can happen in any link of an ML BSS with link BSS address as A3. In case of an MLD, if User-space has provided a valid link_id in action frame TX request, allow transmission of the frame in that link. Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://lore.kernel.org/r/20230201061602.3918-1-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: include puncturing bitmap in channel switch eventsAloka Dixit2023-02-142-15/+29
| | | | | | | | | | Add puncturing bitmap in channel switch notifications and corresponding trace functions. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-4-quic_alokad@quicinc.com [fix qtnfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: nl80211: validate and configure puncturing bitmapAloka Dixit2023-02-141-0/+32
| | | | | | | | | | | | | | | | | | | | - New feature flag, NL80211_EXT_FEATURE_PUNCT, to advertise driver support for preamble puncturing in AP mode. - New attribute, NL80211_ATTR_PUNCT_BITMAP, to receive a puncturing bitmap from the userspace during AP bring up (NL80211_CMD_START_AP) and channel switch (NL80211_CMD_CHANNEL_SWITCH) operations. Each bit corresponds to a 20 MHz channel in the operating bandwidth, lowest bit for the lowest channel. Bit set to 1 indicates that the channel is punctured. Higher 16 bits are reserved. - New members added to structures cfg80211_ap_settings and cfg80211_csa_settings to propagate the bitmap to the driver after validation. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-3-quic_alokad@quicinc.com [move validation against 0xffff into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: move puncturing bitmap validation from mac80211Aloka Dixit2023-02-141-0/+69
| | | | | | | | | | | | | - Move ieee80211_valid_disable_subchannel_bitmap() from mlme.c to chan.c, rename it as cfg80211_valid_disable_subchannel_bitmap() and export it. - Modify the prototype to include struct cfg80211_chan_def instead of only bandwidth to support a check which returns false if the primary channel is punctured. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-2-quic_alokad@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: nl80211: return error message for malformed chandefJaewan Kim2023-02-141-1/+4
| | | | | | | | | | Add an error message to the missing frequency case to have all -EINVAL in nl80211_parse_chandef() return a better error. Signed-off-by: Jaewan Kim <jaewan@google.com> Link: https://lore.kernel.org/r/20230130074514.1560021-1-jaewan@google.com [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: nl80211: add MLO_LINK_ID to CMD_STOP_AP eventAlvin Šipraga2023-02-143-4/+6
| | | | | | | | | | | nl80211_send_ap_stopped() can be called multiple times on the same netdev for each link when using Multi-Link Operation. Add the MLO_LINK_ID attribute to the event to allow userspace to distinguish which link the event is for. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Link: https://lore.kernel.org/r/20230128125844.2407135-2-alvin@pqrs.dk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: nl80211: emit CMD_START_AP on multicast group when an AP is startedAlvin Šipraga2023-02-141-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Userspace processes such as network daemons may wish to be informed when any AP interface is brought up on the system, for example to initiate a (re)configuration of IP settings or to start a DHCP server. Currently nl80211 does not broadcast any such event on its multicast groups, leaving userspace only two options: 1. the process must be the one that actually issued the NL80211_CMD_START_AP request, so that it can react on the response to that request; 2. the process must react to RTM_NEWLINK events indicating a change in carrier state, and may query for further information about the AP and react accordingly. Option (1) is robust, but it does not cover all scenarios. It is easy to imagine a situation where this is not the case (e.g. hostapd + systemd-networkd). Option (2) is not robust, because RTM_NEWLINK events may be silently discarded by the linkwatch logic (cf. linkwatch_fire_event()). Concretely, consider a scenario in which the carrier state flip-flops in the following way: ^ carrier state (high/low = carrier/no carrier) | | _______ _______ ... | | | | | ______| "foo" |____| "bar" (SSID in "quotes") | +-------A-------B----C---------> time If the time interval between (A) and (C) is less than 1 second, then linkwatch may emit only a single RTM_NEWLINK event indicating carrier gain. This is problematic because it is possible that the network configuration that should be applied is a function of the AP's properties such as SSID (cf. SSID= in systemd.network(5)). As illustrated in the above diagram, it may be that the AP with SSID "bar" ends up being configured as though it had SSID "foo". Address the above issue by having nl80211 emit an NL80211_CMD_START_AP message on the MLME nl80211 multicast group. This allows for arbitrary processes to be reliably informed. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Link: https://lore.kernel.org/r/20230128125844.2407135-1-alvin@pqrs.dk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: Extend cfg80211_update_owe_info_event() for MLD APVeerendranath Jakkam2023-02-142-14/+35
| | | | | | | | | | | | | | | | | Add support to offload OWE processing to user space for MLD AP when driver's SME in use. Add new parameters in struct cfg80211_update_owe_info to provide below information in cfg80211_update_owe_info_event() call: - MLO link ID of the AP, with which station requested (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com [reformat the trace event macro] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: Extend cfg80211_new_sta() for MLD APVeerendranath Jakkam2023-02-141-0/+16
| | | | | | | | | | | | | | | | | | | Add support for drivers to indicate STA connection(MLO/non-MLO) when user space SME (e.g., hostapd) is not used for MLD AP. Add new parameters in struct station_info to provide below information in cfg80211_new_sta() call: - MLO link ID of the AP, with which station completed (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. - (Re)Association Response IEs sent to the station. User space needs this to determine rejected and accepted affiliated links information of the connected station if the connection is MLO capable. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-2-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: Fix use after free for wextAlexander Wetzel2023-02-141-5/+26
| | | | | | | | | | | | | | | | | Key information in wext.connect is not reset on (re)connect and can hold data from a previous connection. Reset key data to avoid that drivers or mac80211 incorrectly detect a WEP connection request and access the freed or already reused memory. Additionally optimize cfg80211_sme_connect() and avoid an useless schedule of conn_work. Fixes: fffd0934b939 ("cfg80211: rework key operation") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230124141856.356646-1-alexander@wetzel-home.de Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: Authentication offload to user space for MLO connection in ↵Veerendranath Jakkam2023-02-142-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | STA mode Currently authentication request event interface doesn't have support to indicate the user space whether it should enable MLO or not during the authentication with the specified AP. But driver needs such capability since the connection is MLO or not decided by the driver in case of SME offload to the driver. Add support for driver to indicate MLD address of the AP in authentication offload request to inform user space to enable MLO during authentication process. Driver shall look at NL80211_ATTR_MLO_SUPPORT flag capability in NL80211_CMD_CONNECT to know whether the user space supports enabling MLO during the authentication offload. User space should enable MLO during the authentication only when it receives the AP MLD address in authentication offload request. User space shouldn't enable MLO if the authentication offload request doesn't indicate the AP MLD address even if the AP is MLO capable. When MLO is enabled, user space should use the MAC address of the interface (on which driver sent request) as self MLD address. User space and driver to use MLD addresses in RA, TA and BSSID fields of the frames between them, and driver translates the MLD addresses to/from link addresses based on the link chosen for the authentication. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230116125058.1604843-1-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* wifi: cfg80211: trace: remove MAC_PR_{FMT,ARG}Johannes Berg2023-02-141-124/+120
| | | | | | | With %pM, this really is no longer needed, and actually longer to spell out. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 01:52:45 +0100