summaryrefslogtreecommitdiffstats
path: root/net/xdp (follow)
Commit message (Collapse)AuthorAgeFilesLines
* mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERMIra Weiny2019-05-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* xsk: fix XDP socket ring buffer memory orderingMagnus Karlsson2019-04-171-4/+52
| | | | | | | | | | | | | | | | | | | | The ring buffer code of XDP sockets is missing a memory barrier on the consumer side between the load of the data and the write that signals that it is ok for the producer to put new data into the buffer. On architectures that does not guarantee that stores are not reordered with older loads, the producer might put data into the ring before the consumer had the chance to read it. As IA does guarantee this ordering, it would only need a compiler barrier here, but there are no primitives in Linux for this specific case (hinder writes to be ordered before older reads) so I had to add a smp_mb() here which will translate into a run-time synch operation on IA. Added a longish comment in the code explaining what each barrier in the ring implementation accomplishes and what would happen if we removed one of them. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* xsk: fix umem memory leak on cleanupBjörn Töpel2019-03-161-18/+1
| | | | | | | | | | | | | | | | | | | | When the umem is cleaned up, the task that created it might already be gone. If the task was gone, the xdp_umem_release function did not free the pages member of struct xdp_umem. It turned out that the task lookup was not needed at all; The code was a left-over when we moved from task accounting to user accounting [1]. This patch fixes the memory leak by removing the task lookup logic completely. [1] https://lore.kernel.org/netdev/20180131135356.19134-3-bjorn.topel@gmail.com/ Link: https://lore.kernel.org/netdev/c1cb2ca8-6a14-3980-8672-f3de0bb38dfd@suse.cz/ Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Reported-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* xsk: fix to reject invalid options in Tx descriptorBjörn Töpel2019-03-081-2/+2
| | | | | | | | | | | | | | | Passing a non-existing option in the options member of struct xdp_desc was, incorrectly, silently ignored. This patch addresses that behavior, and drops any Tx descriptor with non-existing options. We have examined existing user space code, and to our best knowledge, no one is relying on the current incorrect behavior. AF_XDP is still in its infancy, so from our perspective, the risk of breakage is very low, and addressing this problem now is important. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* xsk: fix to reject invalid flags in xsk_bindBjörn Töpel2019-03-081-1/+4
| | | | | | | | | | | | | | | Passing a non-existing flag in the sxdp_flags member of struct sockaddr_xdp was, incorrectly, silently ignored. This patch addresses that behavior, and rejects any non-existing flags. We have examined existing user space code, and to our best knowledge, no one is relying on the current incorrect behavior. AF_XDP is still in its infancy, so from our perspective, the risk of breakage is very low, and addressing this problem now is important. Fixes: 965a99098443 ("xsk: add support for bind for Rx") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* xsk: fix potential crash in xsk_diag_put_umem()Eric Dumazet2019-03-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes two typos in xsk_diag_put_umem() syzbot reported the following crash : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 7641 Comm: syz-executor946 Not tainted 5.0.0-rc7+ #95 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:xsk_diag_put_umem net/xdp/xsk_diag.c:71 [inline] RIP: 0010:xsk_diag_fill net/xdp/xsk_diag.c:113 [inline] RIP: 0010:xsk_diag_dump+0xdcb/0x13a0 net/xdp/xsk_diag.c:143 Code: 8d be c0 04 00 00 48 89 f8 48 c1 e8 03 42 80 3c 20 00 0f 85 39 04 00 00 49 8b 96 c0 04 00 00 48 8d 7a 14 48 89 f8 48 c1 e8 03 <42> 0f b6 0c 20 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RSP: 0018:ffff888090bcf2d8 EFLAGS: 00010203 RAX: 0000000000000002 RBX: ffff8880a0aacbc0 RCX: ffffffff86ffdc3c RDX: 0000000000000000 RSI: ffffffff86ffdc70 RDI: 0000000000000014 RBP: ffff888090bcf438 R08: ffff88808e04a700 R09: ffffed1011c74174 R10: ffffed1011c74173 R11: ffff88808e3a0b9f R12: dffffc0000000000 R13: ffff888093a6d818 R14: ffff88808e365240 R15: ffff88808e3a0b40 FS: 00000000011ea880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 000000008fa13000 CR4: 00000000001406e0 Call Trace: netlink_dump+0x55d/0xfb0 net/netlink/af_netlink.c:2252 __netlink_dump_start+0x5b4/0x7e0 net/netlink/af_netlink.c:2360 netlink_dump_start include/linux/netlink.h:226 [inline] xsk_diag_handler_dump+0x1b2/0x250 net/xdp/xsk_diag.c:170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x322/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485 sock_diag_rcv+0x2b/0x40 net/core/sock_diag.c:274 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:632 sock_write_iter+0x27c/0x3e0 net/socket.c:923 call_write_iter include/linux/fs.h:1863 [inline] do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680 do_iter_write fs/read_write.c:956 [inline] do_iter_write+0x184/0x610 fs/read_write.c:937 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001 do_writev+0xf6/0x290 fs/read_write.c:1036 __do_sys_writev fs/read_write.c:1109 [inline] __se_sys_writev fs/read_write.c:1106 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440139 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffcc966cc18 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440139 RDX: 0000000000000001 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000000000004 R11: 0000000000000246 R12: 00000000004019c0 R13: 0000000000401a50 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 460a3c24d0a656c9 ]--- RIP: 0010:xsk_diag_put_umem net/xdp/xsk_diag.c:71 [inline] RIP: 0010:xsk_diag_fill net/xdp/xsk_diag.c:113 [inline] RIP: 0010:xsk_diag_dump+0xdcb/0x13a0 net/xdp/xsk_diag.c:143 Code: 8d be c0 04 00 00 48 89 f8 48 c1 e8 03 42 80 3c 20 00 0f 85 39 04 00 00 49 8b 96 c0 04 00 00 48 8d 7a 14 48 89 f8 48 c1 e8 03 <42> 0f b6 0c 20 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RSP: 0018:ffff888090bcf2d8 EFLAGS: 00010203 RAX: 0000000000000002 RBX: ffff8880a0aacbc0 RCX: ffffffff86ffdc3c RDX: 0000000000000000 RSI: ffffffff86ffdc70 RDI: 0000000000000014 RBP: ffff888090bcf438 R08: ffff88808e04a700 R09: ffffed1011c74174 R10: ffffed1011c74173 R11: ffff88808e3a0b9f R12: dffffc0000000000 R13: ffff888093a6d818 R14: ffff88808e365240 R15: ffff88808e3a0b40 FS: 00000000011ea880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001d22000 CR3: 000000008fa13000 CR4: 00000000001406f0 Fixes: a36b38aa2af6 ("xsk: add sock_diag interface for AF_XDP") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-02-241-1/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Revert "xsk: simplify AF_XDP socket teardown"Björn Töpel2019-02-211-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit e2ce3674883ecba2605370404208c9d4a07ae1c3. It turns out that the sock destructor xsk_destruct was needed after all. The cleanup simplification broke the skb transmit cleanup path, due to that the umem was prematurely destroyed. The umem cannot be destroyed until all outstanding skbs are freed, which means that we cannot remove the umem until the sk_destruct has been called. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-02-202-5/+10
|\| | | | | | | | | | | | | Two easily resolvable overlapping change conflicts, one in TCP and one in the eBPF verifier. Signed-off-by: David S. Miller <davem@davemloft.net>
| * xsk: do not remove umem from netdevice on fall-back to copy-modeBjörn Töpel2019-02-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit c9b47cc1fabc ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") stores the umem into the netdev._rx struct. However, the patch incorrectly removed the umem from the netdev._rx struct when user-space passed "best-effort" mode (i.e. select the fastest possible option available), and zero-copy mode was not available. This commit fixes that. Fixes: c9b47cc1fabc ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * xsk: share the mmap_sem for page pinningDavidlohr Bueso2019-02-111-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Holding mmap_sem exclusively for a gup() is an overkill. Lets share the lock and replace the gup call for gup_longterm(), as it is better suited for the lifetime of the pinning. Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: David S. Miller <davem@davemloft.net> Cc: Bjorn Topel <bjorn.topel@intel.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> CC: netdev@vger.kernel.org Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * xsk: add missing smp_rmb() in xsk_mmapMagnus Karlsson2019-02-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the setup code in AF_XDP is protected by a mutex with the exception of the mmap code that cannot use it. To make sure that a process banging on the mmap call at the same time as another process is setting up the socket, smp_wmb() calls were added in the umem registration code and the queue creation code, so that the published structures that xsk_mmap needs would be consistent. However, the corresponding smp_rmb() calls were not added to the xsk_mmap code. This patch adds these calls. Fixes: 37b076933a8e3 ("xsk: add missing write- and data-dependency barrier") Fixes: c0c77d8fb787c ("xsk: add user memory registration support sockopt") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2019-01-296-5/+256
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf-next 2019-01-29 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Teach verifier dead code removal, this also allows for optimizing / removing conditional branches around dead code and to shrink the resulting image. Code store constrained architectures like nfp would have hard time doing this at JIT level, from Jakub. 2) Add JMP32 instructions to BPF ISA in order to allow for optimizing code generation for 32-bit sub-registers. Evaluation shows that this can result in code reduction of ~5-20% compared to 64 bit-only code generation. Also add implementation for most JITs, from Jiong. 3) Add support for __int128 types in BTF which is also needed for vmlinux's BTF conversion to work, from Yonghong. 4) Add a new command to bpftool in order to dump a list of BPF-related parameters from the system or for a specific network device e.g. in terms of available prog/map types or helper functions, from Quentin. 5) Add AF_XDP sock_diag interface for querying sockets from user space which provides information about the RX/TX/fill/completion rings, umem, memory usage etc, from Björn. 6) Add skb context access for skb_shared_info->gso_segs field, from Eric. 7) Add support for testing flow dissector BPF programs by extending existing BPF_PROG_TEST_RUN infrastructure, from Stanislav. 8) Split BPF kselftest's test_verifier into various subgroups of tests in order better deal with merge conflicts in this area, from Jakub. 9) Add support for queue/stack manipulations in bpftool, from Stanislav. 10) Document BTF, from Yonghong. 11) Dump supported ELF section names in libbpf on program load failure, from Taeung. 12) Silence a false positive compiler warning in verifier's BTF handling, from Peter. 13) Fix help string in bpftool's feature probing, from Prashant. 14) Remove duplicate includes in BPF kselftests, from Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | xsk: add sock_diag interface for AF_XDPBjörn Töpel2019-01-255-5/+213
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the sock_diag interface for querying sockets from user space. Tools like iproute2 ss(8) can use this interface to list open AF_XDP sockets. The user-space ABI is defined in linux/xdp_diag.h and includes netlink request and response structs. The request can query sockets and the response contains socket information about the rings, umems, inode and more. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * | xsk: add id to umemBjörn Töpel2019-01-251-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds an id to the umem structure. The id uniquely identifies a umem instance, and will be exposed to user-space via the socket monitoring interface. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * | net: xsk: track AF_XDP sockets on a per-netns listBjörn Töpel2019-01-251-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | Track each AF_XDP socket in a per-netns list. This will be used later by the sock_diag interface for querying sockets from userspace. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | | xsk: export xdp_get_umem_from_qidJan Sokolowski2019-01-221-0/+1
| |/ |/| | | | | | | | | | | | | | | Export xdp_get_umem_from_qid for other modules to use. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | xsk: Check if a queue exists during umem setupKrzysztof Kazimierczak2019-01-151-3/+13
|/ | | | | | | | | | | | | | | | | | | | In the xdp_umem_assign_dev() path, the xsk code does not check if a queue for which umem is to be created exists. It leads to a situation where umem is not assigned to any Tx/Rx queue of a netdevice, without notifying the stack about an error. This affects both XDP_SKB and XDP_DRV modes - in case of XDP_DRV_ZC, queue index is checked by the driver. This patch fixes xsk code, so that in both XDP_SKB and XDP_DRV mode of AF_XDP, an error is returned when requested queue index exceedes an existing maximum. Fixes: c9b47cc1fabca ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") Reported-by: Jakub Spizewski <jakub.spizewski@intel.com> Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* xsk: simplify AF_XDP socket teardownBjörn Töpel2018-12-191-15/+1
| | | | | | | | | | | | | | | | | | | Prior this commit, when the struct socket object was being released, the UMEM did not have its reference count decreased. Instead, this was done in the struct sock sk_destruct function. There is no reason to keep the UMEM reference around when the socket is being orphaned, so in this patch the xdp_put_mem is called in the xsk_release function. This results in that the xsk_destruct function can be removed! Note that, it still holds that a struct xsk_sock reference might still linger in the XSKMAP after the UMEM is released, e.g. if a user does not clear the XSKMAP prior to closing the process. This sock will be in a "released" zombie like state, until the XSKMAP is removed. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-10-191-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | net/sched/cls_api.c has overlapping changes to a call to nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL to the 5th argument, and another (from 'net-next') added cb->extack instead of NULL to the 6th argument. net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to code which moved (to mr_table_dump)) in 'net-next'. Thanks to David Ahern for the heads up. Signed-off-by: David S. Miller <davem@davemloft.net>
| * xsk: do not call synchronize_net() under RCU read lockBjörn Töpel2018-10-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The XSKMAP update and delete functions called synchronize_net(), which can sleep. It is not allowed to sleep during an RCU read section. Instead we need to make sure that the sock sk_destruct (xsk_destruct) function is asynchronously called after an RCU grace period. Setting the SOCK_RCU_FREE flag for XDP sockets takes care of this. Fixes: fbfc504a24f5 ("bpf: introduce new bpf AF_XDP map type BPF_MAP_TYPE_XSKMAP") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | xsk: proper AF_XDP socket teardown orderingBjörn Töpel2018-10-082-13/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AF_XDP socket struct can exist in three different, implicit states: setup, bound and released. Setup is prior the socket has been bound to a device. Bound is when the socket is active for receive and send. Released is when the process/userspace side of the socket is released, but the sock object is still lingering, e.g. when there is a reference to the socket in an XSKMAP after process termination. The Rx fast-path code uses the "dev" member of struct xdp_sock to check whether a socket is bound or relased, and the Tx code uses the struct xdp_umem "xsk_list" member in conjunction with "dev" to determine the state of a socket. However, the transition from bound to released did not tear the socket down in correct order. On the Rx side "dev" was cleared after synchronize_net() making the synchronization useless. On the Tx side, the internal queues were destroyed prior removing them from the "xsk_list". This commit corrects the cleanup order, and by doing so xdp_del_sk_umem() can be simplified and one synchronize_net() can be removed. Fixes: 965a99098443 ("xsk: add support for bind for Rx") Fixes: ac98d8aab61b ("xsk: wire upp Tx zero-copy functions") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | xsk: simplify xdp_clear_umem_at_qid implementationMagnus Karlsson2018-10-051-5/+2
| | | | | | | | | | | | | | | | | | As we now do not allow ethtool to deactivate the queue id we are running an AF_XDP socket on, we can simplify the implementation of xdp_clear_umem_at_qid(). Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | ethtool: don't allow disabling queues with umem installedJakub Kicinski2018-10-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | We already check the RSS indirection table does not use queues which would be disabled by channel reconfiguration. Make sure user does not try to disable queues which have a UMEM and zero-copy AF_XDP socket installed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | xsk: fix bug when trying to use both copy and zero-copy on one queue idMagnus Karlsson2018-10-053-35/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, the xsk code did not record which umem was bound to a specific queue id. This was not required if all drivers were zero-copy enabled as this had to be recorded in the driver anyway. So if a user tried to bind two umems to the same queue, the driver would say no. But if copy-mode was first enabled and then zero-copy mode (or the reverse order), we mistakenly enabled both of them on the same umem leading to buggy behavior. The main culprit for this is that we did not store the association of umem to queue id in the copy case and only relied on the driver reporting this. As this relation was not stored in the driver for copy mode (it does not rely on the AF_XDP NDOs), this obviously could not work. This patch fixes the problem by always recording the umem to queue id relationship in the netdev_queue and netdev_rx_queue structs. This way we always know what kind of umem has been bound to a queue id and can act appropriately at bind time. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | net: xsk: add a simple buffer reuse queueJakub Kicinski2018-09-253-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | XSK UMEM is strongly single producer single consumer so reuse of frames is challenging. Add a simple "stash" of FILL packets to reuse for drivers to optionally make use of. This is useful when driver has to free (ndo_stop) or resize a ring with an active AF_XDP ZC socket. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | xsk: i40e: get rid of useless struct xdp_umem_propsMagnus Karlsson2018-09-015-28/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit gets rid of the structure xdp_umem_props. It was there to be able to break a dependency at one point, but this is no longer needed. The values in the struct are instead stored directly in the xdp_umem structure. This simplifies the xsk code as well as af_xdp zero-copy drivers and as a bonus gets rid of one internal header file. The i40e driver is also adapted to the new interface in this commit. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | xsk: remove unnecessary assignmentPrashant Bhole2018-09-011-2/+0
| | | | | | | | | | | | | | | | | | | | Since xdp_umem_query() was added one assignment of bpf.command was missed from cleanup. Removing the assignment statement. Fixes: 84c6b86875e01a0 ("xsk: don't allow umem replace at stack level") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | xsk: include XDP meta data in AF_XDP framesBjörn Töpel2018-08-301-6/+18
| | | | | | | | | | | | | | | | | | | | | | | | Previously, the AF_XDP (XDP_DRV/XDP_SKB copy-mode) ingress logic did not include XDP meta data in the data buffers copied out to the user application. In this commit, we check if meta data is available, and if so, it is prepended to the frame. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | xsk: expose xdp_umem_get_{data,dma} to driversBjörn Töpel2018-08-291-10/+0
|/ | | | | | | | | | | | Move the xdp_umem_get_{data,dma} functions to include/net/xdp_sock.h, so that the upcoming zero-copy implementation in the Ethernet drivers can utilize them. Also, supply some dummy function implementations for CONFIG_XDP_SOCKETS=n configs. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* xsk: fix return value of xdp_umem_assign_dev()Prashant Bhole2018-08-211-2/+2
| | | | | | | | | | | | s/ENOTSUPP/EOPNOTSUPP/ in function umem_assign_dev(). This function's return value is directly returned by xsk_bind(). EOPNOTSUPP is bind()'s possible return value. Fixes: f734607e819b ("xsk: refactor xdp_umem_assign_dev()") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-08-051-3/+1
|\ | | | | | | | | | | | | | | | | | | | | Lots of overlapping changes, mostly trivial in nature. The mlxsw conflict was resolving using the example resolution at: https://github.com/jpirko/linux_mlxsw/blob/combined_queue/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: xsk: don't return frames via the allocator on errorJakub Kicinski2018-07-311-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xdp_return_buff() is used when frame has been successfully handled (transmitted) or if an error occurred during delayed processing and there is no way to report it back to xdp_do_redirect(). In case of __xsk_rcv_zc() error is propagated all the way back to the driver, so there is no need to call xdp_return_buff(). Driver will recycle the frame anyway after seeing that error happened. Fixes: 173d3adb6f43 ("xsk: add zero-copy support for Rx") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-08-021-1/+1
|\| | | | | | | | | | | | | | | | | | | The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
| * xsk: fix poll/POLLIN premature returnsBjörn Töpel2018-07-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Polling for the ingress queues relies on reading the producer/consumer pointers of the Rx queue. Prior this commit, a cached consumer pointer could be used, instead of the actual consumer pointer and therefore report POLLIN prematurely. This patch makes sure that the non-cached consumer pointer is used instead. Reported-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Qi Zhang <qi.z.zhang@intel.com> Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | xsk: don't allow umem replace at stack levelJakub Kicinski2018-07-311-9/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently drivers have to check if they already have a umem installed for a given queue and return an error if so. Make better use of XDP_QUERY_XSK_UMEM and move this functionality to the core. We need to keep rtnl across the calls now. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xsk: refactor xdp_umem_assign_dev()Jakub Kicinski2018-07-311-28/+21
|/ | | | | | | | | | Return early and only take the ref on dev once there is no possibility of failing. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xsk: do not return EMSGSIZE in copy mode for packets larger than MTUMagnus Karlsson2018-07-131-6/+1
| | | | | | | | | | | This patch stops returning EMSGSIZE from sendmsg in copy mode when the size of the packet is larger than the MTU. Just send it to the device so that it will drop it as in zero-copy mode. This makes the error reporting consistent between copy mode and zero-copy mode. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* xsk: always return ENOBUFS from sendmsg if there is no TX queueMagnus Karlsson2018-07-131-3/+2
| | | | | | | | | | | This patch makes sure ENOBUFS is always returned from sendmsg if there is no TX queue configured. This was not the case for zero-copy mode. With this patch this error reporting is consistent between copy mode and zero-copy mode. Fixes: ac98d8aab61b ("xsk: wire upp Tx zero-copy functions") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* xsk: do not return EAGAIN from sendmsg when completion queue is fullMagnus Karlsson2018-07-131-3/+1
| | | | | | | | | | | | | | | | | This patch stops returning EAGAIN in TX copy mode when the completion queue is full as zero-copy does not do this. Instead this situation can be detected by comparing the head and tail pointers of the completion queue in both modes. In any case, EAGAIN was not the correct error code here since no amount of calling sendmsg will solve the problem. Only consuming one or more messages on the completion queue will fix this. With this patch, the error reporting becomes consistent between copy mode and zero-copy mode. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* xsk: do not return ENXIO from TX copy modeMagnus Karlsson2018-07-131-3/+1
| | | | | | | | | | | | This patch removes the ENXIO return code from TX copy-mode when someone has forcefully changed the number of queues on the device so that the queue bound to the socket is no longer available. Just silently stop sending anything as in zero-copy mode so the error reporting gets consistent between the two modes. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* xsk: fix potential race in SKB TX completion codeMagnus Karlsson2018-07-031-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a potential race in the TX completion code for the SKB case. One process enters the sendmsg code of an AF_XDP socket in order to send a frame. The execution eventually trickles down to the driver that is told to send the packet. However, it decides to drop the packet due to some error condition (e.g., rings full) and frees the SKB. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. At the same time a TX interrupt has fired on another core and it dispatches the TX completion code in the driver. It does its HW specific things and ends up freeing the SKB associated with the transmitted packet. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. With a pseudo call stack, it would look like this: Core 1: sendmsg() being called in the application netdev_start_xmit() Driver entered through ndo_start_xmit Driver decides to free the SKB for some reason (e.g., rings full) Destructor of SKB called xskq_produce_addr() is called to signal completion to user space Core 2: TX completion irq NAPI loop Driver irq handler for TX completions Frees the SKB Destructor of SKB called xskq_produce_addr() is called to signal completion to user space We now have a violation of the single-producer/single-consumer principle for our queues as there are two threads trying to produce at the same time on the same queue. Fixed by introducing a spin_lock in the destructor. In regards to the performance, I get around 1.74 Mpps for txonly before and after the introduction of the spinlock. There is of course some impact due to the spin lock but it is in the less significant digits that are too noisy for me to measure. But let us say that the version without the spin lock got 1.745 Mpps in the best case and the version with 1.735 Mpps in the worst case, then that would mean a maximum drop in performance of 0.5%. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* xsk: frame could be completed more than once in SKB pathMagnus Karlsson2018-07-031-3/+3
| | | | | | | | | | | | | | | | | | Fixed a bug in which a frame could be completed more than once when an error was returned from dev_direct_xmit(). The code erroneously retried sending the message leading to multiple calls to the SKB destructor and therefore multiple completions of the same buffer to user space. The error code in this case has been changed from EAGAIN to EBUSY in order to tell user space that the sending of the packet failed and the buffer has been return to user space through the completion queue. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Reported-by: Pavel Odintsov <pavel@fastnetmon.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* xsk: fix potential lost completion message in SKB pathMagnus Karlsson2018-07-031-7/+2
| | | | | | | | | | | | | The code in xskq_produce_addr erroneously checked if there was up to LAZY_UPDATE_THRESHOLD amount of space in the completion queue. It only needs to check if there is one slot left in the queue. This bug could under some circumstances lead to a WARN_ON_ONCE being triggered and the completion message to user space being lost. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Reported-by: Pavel Odintsov <pavel@fastnetmon.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds2018-06-281-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* xsk: re-add queue id check for XDP_SKB pathBjörn Töpel2018-06-121-0/+3
| | | | | | | | | | | Commit 173d3adb6f43 ("xsk: add zero-copy support for Rx") introduced a regression on the XDP_SKB receive path, when the queue id checks were removed. Now, they are back again. Fixes: 173d3adb6f43 ("xsk: add zero-copy support for Rx") Reported-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* xsk: silence warning on memory allocation failureBjörn Töpel2018-06-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzkaller reported a warning from xdp_umem_pin_pages(): WARNING: CPU: 1 PID: 4537 at mm/slab_common.c:996 kmalloc_slab+0x56/0x70 mm/slab_common.c:996 ... __do_kmalloc mm/slab.c:3713 [inline] __kmalloc+0x25/0x760 mm/slab.c:3727 kmalloc_array include/linux/slab.h:634 [inline] kcalloc include/linux/slab.h:645 [inline] xdp_umem_pin_pages net/xdp/xdp_umem.c:205 [inline] xdp_umem_reg net/xdp/xdp_umem.c:318 [inline] xdp_umem_create+0x5c9/0x10f0 net/xdp/xdp_umem.c:349 xsk_setsockopt+0x443/0x550 net/xdp/xsk.c:531 __sys_setsockopt+0x1bd/0x390 net/socket.c:1935 __do_sys_setsockopt net/socket.c:1946 [inline] __se_sys_setsockopt net/socket.c:1943 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1943 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe This is a warning about attempting to allocate more than KMALLOC_MAX_SIZE memory. The request originates from userspace, and if the request is too big, the kernel is free to deny its allocation. In this patch, the failed allocation attempt is silenced with __GFP_NOWARN. Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Reported-by: syzbot+4abadc5d69117b346506@syzkaller.appspotmail.com Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* bpf, xdp: fix crash in xdp_umem_unaccount_pagesDaniel Borkmann2018-06-081-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzkaller was able to trigger the following panic for AF_XDP: BUG: KASAN: null-ptr-deref in atomic64_sub include/asm-generic/atomic-instrumented.h:144 [inline] BUG: KASAN: null-ptr-deref in atomic_long_sub include/asm-generic/atomic-long.h:199 [inline] BUG: KASAN: null-ptr-deref in xdp_umem_unaccount_pages.isra.4+0x3d/0x80 net/xdp/xdp_umem.c:135 Write of size 8 at addr 0000000000000060 by task syz-executor246/4527 CPU: 1 PID: 4527 Comm: syz-executor246 Not tainted 4.17.0+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 kasan_report_error mm/kasan/report.c:352 [inline] kasan_report.cold.7+0x6d/0x2fe mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278 atomic64_sub include/asm-generic/atomic-instrumented.h:144 [inline] atomic_long_sub include/asm-generic/atomic-long.h:199 [inline] xdp_umem_unaccount_pages.isra.4+0x3d/0x80 net/xdp/xdp_umem.c:135 xdp_umem_reg net/xdp/xdp_umem.c:334 [inline] xdp_umem_create+0xd6c/0x10f0 net/xdp/xdp_umem.c:349 xsk_setsockopt+0x443/0x550 net/xdp/xsk.c:531 __sys_setsockopt+0x1bd/0x390 net/socket.c:1935 __do_sys_setsockopt net/socket.c:1946 [inline] __se_sys_setsockopt net/socket.c:1943 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1943 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe In xdp_umem_reg() the call to xdp_umem_account_pages() passed with CAP_IPC_LOCK where we didn't need to end up charging rlimit on memlock for the current user and therefore umem->user continues to be NULL. Later on through fault injection syzkaller triggered a failure in either umem->pgs or umem->pages allocation such that we bail out and undo accounting in xdp_umem_unaccount_pages() where we eventually hit the panic since it tries to deref the umem->user. The code is pretty close to mm_account_pinned_pages() and mm_unaccount_pinned_pages() pair and potentially could reuse it even in a later cleanup, and it appears that the initial commit c0c77d8fb787 ("xsk: add user memory registration support sockopt") got this right while later follow-up introduced the bug via a49049ea2576 ("xsk: simplified umem setup"). Fixes: a49049ea2576 ("xsk: simplified umem setup") Reported-by: syzbot+979217770b09ebf5c407@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* xsk: Fix umem fill/completion queue mmap on 32-bitGeert Uytterhoeven2018-06-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | With gcc-4.1.2 on 32-bit: net/xdp/xsk.c:663: warning: integer constant is too large for ‘long’ type net/xdp/xsk.c:665: warning: integer constant is too large for ‘long’ type Add the missing "ULL" suffixes to the large XDP_UMEM_PGOFF_*_RING values to fix this. net/xdp/xsk.c:663: warning: comparison is always false due to limited range of data type net/xdp/xsk.c:665: warning: comparison is always false due to limited range of data type "unsigned long" is 32-bit on 32-bit systems, hence the offset is truncated, and can never be equal to any of the XDP_UMEM_PGOFF_*_RING values. Use loff_t (and the required cast) to fix this. Fixes: 423f38329d267969 ("xsk: add umem fill queue support and mmap") Fixes: fe2308328cd2f26e ("xsk: add umem completion queue support and mmap") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2018-06-071-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 23:41:03 +0100