summaryrefslogtreecommitdiffstats
path: root/net (follow)
Commit message (Collapse)AuthorAgeFilesLines
* neigh: Send a notification when DELAY_PROBE_TIME changesIdo Schimmel2016-07-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | When the data plane is offloaded the traffic doesn't go through the networking stack. Therefore, after first resolving a neighbour the NUD state machine will transition it from REACHABLE to STALE until it's finally deleted by the garbage collector. To prevent such situations the offloading driver should notify the NUD state machine on any neighbours that were recently used. The driver's polling interval should be set so that the NUD state machine can function as if the traffic wasn't offloaded. Currently, there are no in-tree drivers that can report confirmation for a neighbour, but only 'used' indication. Therefore, the polling interval should be set according to DELAY_FIRST_PROBE_TIME, as a neighbour will transition from REACHABLE state to DELAY (instead of STALE) if "a packet was sent within the last DELAY_FIRST_PROBE_TIME seconds" (RFC 4861). Send a netevent whenever the DELAY_FIRST_PROBE_TIME changes - either via netlink or sysctl - so that offloading drivers can correctly set their polling interval. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: introduce default neigh_construct/destroy ndo calls for L2 upper devicesJiri Pirko2016-07-053-0/+48
| | | | | | | | | | L2 upper device needs to propagate neigh_construct/destroy calls down to lower devices. Do this by defining default ndo functions and use them in team, bond, bridge and vlan. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add dev arg to ndo_neigh_construct/destroyJiri Pirko2016-07-053-4/+4
| | | | | | | | | As the following patch will allow upper devices to follow the call down lower devices, we need to add dev here and not rely on n->dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'batadv-next-for-davem-20160704' of ↵David S. Miller2016-07-0541-1217/+3716
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature patchset includes the following changes: - Cleanup work by Markus Pargmann and Sven Eckelmann (six patches) - Initial Netlink support by Matthias Schiffer (two patches) - Throughput Meter implementation by Antonio Quartulli, a kernel-space traffic generator to estimate link speeds. This feature is useful on low-end WiFi APs where running iperf or netperf from userspace gives wrong results due to heavy userspace/kernelspace overhead. (two patches) - API clean-up work by Antonio Quartulli (one patch) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * batman-adv: split routing API data structure in subobjectsAntonio Quartulli2016-07-0412-124/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The routing API data structure contains several function pointers that can easily be grouped together based on the component they work with. Split the API in subobjects in order to improve definition readability. At the same time, remove the "bat_" prefix from the API object and its fields names. These are batman-adv private structs and there is no need to always prepend such prefix, which only makes function invocations much much longer. Signed-off-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: throughput meter implementationAntonio Quartulli2016-07-0412-10/+1978
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The throughput meter module is a simple, kernel-space replacement for throughtput measurements tool like iperf and netperf. It is intended to approximate TCP behaviour. It is invoked through batctl: the protocol is connection oriented, with cumulative acknowledgment and a dynamic-size sliding window. The test *can* be interrupted by batctl. A receiver side timeout avoids unlimited waitings for sender packets: after one second of inactivity, the receiver abort the ongoing test. Based on a prototype from Edo Monticelli <montik@autistici.org> Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: return netdev status in the TX pathAntonio Quartulli2016-07-045-44/+68
| | | | | | | | | | | | | | | | | | | | Return the proper netdev TX status along the TX path so that the tp_meter can understand when the queue is full and should stop sending packets. Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: add netlink command to query generic mesh information filesMatthias Schiffer2016-07-041-0/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | BATADV_CMD_GET_MESH_INFO is used to query basic information about a batman-adv softif (name, index and MAC address for both the softif and the primary hardif; routing algorithm; batman-adv version). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven.eckelmann@open-mesh.com: Reduce the number of changes to BATADV_CMD_GET_MESH_INFO, add missing kerneldoc, add policy for attributes] Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: add generic netlink family for batman-advMatthias Schiffer2016-07-044-0/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | debugfs is currently severely broken virtually everywhere in the kernel where files are dynamically added and removed (see http://lkml.iu.edu/hypermail/linux/kernel/1506.1/02196.html for some details). In addition to that, debugfs is not namespace-aware. Instead of adding new debugfs entries, the whole infrastructure should be moved to netlink. This will fix the long standing problem of large buffers for debug tables and hard to parse text files. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven.eckelmann@open-mesh.com: Strip down patch to only add genl family, add missing kerneldoc] Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: Fix bat_(iv|v) function declaration headerSven Eckelmann2016-06-309-36/+84
| | | | | | | | | | | | | | | | | | | | | | The bat_algo.h had some functions declared which were not part of the bat_algo.c file. These are instead stored in bat_v.c and bat_iv_ogm.c. The declaration should therefore be also in bat_v.h and bat_iv_ogm,h to make them easier to find. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: Consolidate logging related functionsSven Eckelmann2016-06-3023-282/+364
| | | | | | | | | | | | | | | | | | | | | | There are several places in batman-adv which provide logging related functions. These should be grouped together in the log.* files to make them easier to find. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: move bat_algo functions into a separate fileSven Eckelmann2016-06-3011-108/+160
| | | | | | | | | | | | | | | | | | | | | | | | The bat_algo functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~15%, 103 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: split tvlv into a separate fileMarkus Pargmann2016-06-3013-625/+700
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tvlv functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~45%, 588 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c Signed-off-by: Markus Pargmann <mpa@pengutronix.de> [sven@narfation.org: fix conflicts with current version, fix includes, rewrote commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: Keep includes ordered by filenameSven Eckelmann2016-06-307-11/+11
| | | | | | | | | | | | | | | | | | | | | | It is easier to detect if a include is already there for a used functionality when the includes are ordered. Using an alphabetic order together with the grouping in commit 1e2c2a4fe4a5 ("batman-adv: Add required includes to all files") makes includes better manageable. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: Include main.h in bat_v_ogm.hSven Eckelmann2016-06-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | main.h includes statements which (re)define preprocessor variables which influence the compiled code. This makes it necessary to include it in all files. For example, it redefines pr_fmt used to the module as prefix for each pr_* message. Reported-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
* | mlxsw: spectrum: Add couple of lower device helper functionsJiri Pirko2016-07-051-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add functions that iterate over lower devices and find port device. As a dependency add netdev_for_each_all_lower_dev and netdev_for_each_all_lower_dev_rcu macro with netdev_all_lower_get_next and netdev_all_lower_get_next_rcu shelpers. Also, add functions to return mlxsw struct according to lower device found and mlxsw_port struct with a reference to lower device. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bpf: add bpf_get_hash_recalc helperDaniel Borkmann2016-07-051-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If skb_clear_hash() was invoked due to mangling of relevant headers and BPF program needs skb->hash later on, we can add a helper to trigger hash recalculation via bpf_get_hash_recalc(). The helper will return the newly retrieved hash directly, but later access can also be done via skb context again through skb->hash directly (inline) without needing to call the helper once more. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: pktgen: support injecting packets for qdisc testingJohn Fastabend2016-07-051-2/+40
| | | | | | | | | | | | | | | | | | Add another xmit_mode to pktgen to allow testing xmit functionality of qdiscs. The new mode "queue_xmit" injects packets at __dev_queue_xmit() so that qdisc is called. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net sched actions: skbedit convert to use more modern nla_put_xxxJamal Hadi Salim2016-07-051-8/+4
| | | | | | | | | | Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net sched actions: skbedit add support for mod-ing skb pkt_typeJamal Hadi Salim2016-07-051-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extremely useful for setting packet type to host so i dont have to modify the dst mac address using pedit (which requires that i know the mac address) Example usage: tc filter add dev eth0 parent ffff: protocol ip pref 9 u32 \ match ip src 5.5.5.5/32 \ flowid 1:5 action skbedit ptype host This will tag all packets incoming from 5.5.5.5 with type PACKET_HOST Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: simplify and make pkt_type_ok() available for other usersJamal Hadi Salim2016-07-051-8/+1
| | | | | | | | | | | | | | Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/devlink: Add E-Switch mode controlOr Gerlitz2016-07-021-0/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the commands to set and show the mode of SRIOV E-Switch, two modes are supported: * legacy: operating in the "old" L2 based mode (DMAC --> VF vport) * switchdev: the E-Switch is referred to as whitebox switch configured using standard tools such as tc, bridge, openvswitch etc. To allow working with the tools, for each VF, a VF representor netdevice is created by the E-Switch manager vendor device driver instance (e.g PF). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'batadv-next-for-davem-20160701' of ↵David S. Miller2016-07-0125-182/+694
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature patchset includes the following changes: - two patches with minimal clean up work by Antonio Quartulli and Simon Wunderlich - eight patches of B.A.T.M.A.N. V, API and documentation clean up work, by Antonio Quartulli and Marek Lindner - Andrew Lunn fixed the skb priority adoption when forwarding fragmented packets (two patches) - Multicast optimization support is now enabled for bridges which comes with some protocol updates, by Linus Luessing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * batman-adv: Add debugfs table for mcast flagsLinus Lüssing2016-06-303-0/+130
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a debugfs table with originators and their according multicast flags to help users figure out why multicast optimizations might be enabled or disabled for them. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: Adding logging of mcast flag changesLinus Lüssing2016-06-304-3/+142
| | | | | | | | | | | | | | | | | | | | | | With this patch changes relevant to a node's own multicast flags are printed to the 'mcast' log level. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: Add multicast optimization support for bridged setupsLinus Lüssing2016-06-303-19/+177
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch we are finally able to support multicast optimizations in bridged setups, too. So far, if a bridge was added on top of a soft-interface (e.g. bat0) the batman-adv multicast optimizations needed to be disabled to avoid packetloss. Current Linux bridge implementations and API can now provide us with the so far missing information about interested but "remote" multicast receivers behind bridge ports. The Linux bridge performs the detection of remote participants interested in multicast packets with its own and mature so called IGMP and MLD snooping code and stores that in its database. With the new API provided by the bridge batman-adv can now simply hook into this database. We then reliably announce the gathered multicast listeners to other nodes through the batman-adv translation table. Additionally, the Linux bridge provides us with the information about whether an IGMP/MLD querier exists. If there is none then we need to disable multicast optimizations as we cannot learn about multicast listeners on external, bridged-in host then. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: Always flood IGMP/MLD reportsLinus Lüssing2016-06-302-14/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: Include frame priority in fragment headerAndrew Lunn2016-06-303-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Unfragmented frames which traverse a node have their skb->priority set by looking at the IP ToS byte, or the 802.1p header. However for fragments this is not possible, only one of the fragments will contain the headers. Instead, place the priority into the fragment header and on receiving a fragment, use this information to set the skb->priority for when the fragment is forwarded. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: Set skb priority in fragmentsAndrew Lunn2016-06-301-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | BATMAN will set the skb->priority based on the IP precedence or 802.1q tag. However, if it needs to fragment the frame, it currently leaves the fragment skb with the default priority and actually overwrites the priority in the unfragmented frame. Fix this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: init ELP tweaking options only onceMarek Lindner2016-06-304-7/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | The ELP interval and throughput override interface settings are initialized with default settings on every time an interface is added to a mesh. This patch prevents this behavior by moving the configuration init to the interface detection routine which runs only once per interface. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> [a@unstable.cc: move initialization to batadv_v_hardif_init] Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: move GW mode and selection class to private data structureAntonio Quartulli2016-06-305-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To reduce the field pollution in our main batadv_priv data structure we've already created some substructures so that we could group fields in a convenient manner. However gw_mode and gw_sel_class are still part of the main object. More both fields to the GW private substructure. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: remove useless inline attribute for sysfs helper functionAntonio Quartulli2016-06-301-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | the compiler can optimize functions within the same C file and therefore there is no need to make it explicit. Remove the useless inline attribute for __batadv_store_uint_attr() Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: remove ogm_emit and ogm_schedule API callsAntonio Quartulli2016-06-307-86/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The ogm_emit and ogm_schedule API calls were rather tight to the B.A.T.M.A.N. IV logic and therefore rather difficult to use with other algorithm implementations. Remove such calls and move the surrounding logic into the B.A.T.M.A.N. IV specific code. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: remove unused callback from batadv_algo_ops structMarek Lindner2016-06-302-8/+0
| | | | | | | | | | | | Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: refactor batadv_neigh_node_* functions to follow common styleMarek Lindner2016-06-305-13/+38
| | | | | | | | | | | | Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: remove unused vid local variable in tt seq printSimon Wunderlich2016-06-301-2/+0
| | | | | | | | | | | | Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
| * batman-adv: statically print gateway table headerAntonio Quartulli2016-06-301-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | To make it easier to search through the code it is better to print static strings directly instead of using format strings printing constants. This was addressed in a previous patch, but the Gateway table header was not updated accordingly. Signed-off-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
| * batman-adv: Start new development cycleSimon Wunderlich2016-06-301-1/+1
| | | | | | | | | | Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
* | RDS: Do not send a pong to an incoming ping with 0 src portSowmini Varadhan2016-07-011-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | RDS ping messages are sent with a non-zero src port to a zero dst port, so that the rds pong messages can be sent back to the originators src port. However if a confused/malicious sender sends a ping with a 0 src port, we'd have an infinite ping-pong loop. To avoid this, the receiver should ignore ping messages with a 0 src port. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | RDS: TCP: Simplify reconnect to avoid duelling reconnnect attemptsSowmini Varadhan2016-07-012-3/+6
| | | | | | | | | | | | | | | | | | When reconnecting, the peer with the smaller IP address will initiate the reconnect, to avoid needless duelling SYN issues. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | RDS: TCP: Hooks to set up a single connection pathSowmini Varadhan2016-07-019-17/+20
| | | | | | | | | | | | | | | | | | This patch adds ->conn_path_connect callbacks in the rds_transport that are used to set up a single connection path. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | RDS: TCP: make receive path use the rds_conn_pathSowmini Varadhan2016-07-019-22/+26
| | | | | | | | | | | | | | | | | | | | The ->sk_user_data contains a pointer to the rds_conn_path for the socket. Use this consistently in the rds_tcp_data_ready callbacks to get the rds_conn_path for rds_recv_incoming. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | RDS: TCP: make ->sk_user_data point to a rds_conn_pathSowmini Varadhan2016-07-016-40/+41
| | | | | | | | | | | | | | | | | | The socket callbacks should all operate on a struct rds_conn_path, in preparation for a MP capable RDS-TCP. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | RDS: TCP: Refactor connection destruction to handle multiple pathsSowmini Varadhan2016-07-011-7/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A single rds_connection may have multiple rds_conn_paths that have to be carefully and correctly destroyed, for both rmmod and netns-delete cases. For both cases, we extract a single rds_tcp_connection for each conn into a temporary list, and then invoke rds_conn_destroy() which iteratively dismantles every path in the rds_connection. For the netns deletion case, we additionally have to make sure that we do not leave a socket in TIME_WAIT state, as this will hold up the netns deletion. Thus we call rds_tcp_conn_paths_destroy() to reset state quickly. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | RDS: TCP: Make rds_tcp_connection track the rds_conn_pathSowmini Varadhan2016-07-015-42/+48
| | | | | | | | | | | | | | | | | | | | | | The struct rds_tcp_connection is the transport-specific private data structure that tracks TCP information per rds_conn_path. Modify this structure to have a back-pointer to the rds_conn_path for which it is the ->cp_transport_data. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | RDS: TCP: Remove dead logic around c_passive in rds-tcpSowmini Varadhan2016-07-011-6/+1
| | | | | | | | | | | | | | | | | | | | The c_passive bit is only intended for the IB transport and will never be encountered in rds-tcp, so remove the dead logic that predicates on this bit. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | RDS: Rework path specific indirectionsSowmini Varadhan2016-07-0112-40/+29
| | | | | | | | | | | | | | | | | | | | | | Refactor code to avoid separate indirections for single-path and multipath transports. All transports (both single and mp-capable) will get a pointer to the rds_conn_path, and can trivially derive the rds_connection from the ->cp_conn. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cgroup: bpf: Add bpf_skb_in_cgroup_protoMartin KaFai Lau2016-07-011-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a bpf helper, bpf_skb_in_cgroup, to decide if a skb->sk belongs to a descendant of a cgroup2. It is similar to the feature added in netfilter: commit c38c4597e4bf ("netfilter: implement xt_cgroup cgroup2 path match") The user is expected to populate a BPF_MAP_TYPE_CGROUP_ARRAY which will be used by the bpf_skb_in_cgroup. Modifications to the bpf verifier is to ensure BPF_MAP_TYPE_CGROUP_ARRAY and bpf_skb_in_cgroup() are always used together. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bpf: refactor bpf_prog_get and type check into helperDaniel Borkmann2016-07-015-36/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since bpf_prog_get() and program type check is used in a couple of places, refactor this into a small helper function that we can make use of. Since the non RO prog->aux part is not used in performance critical paths and a program destruction via RCU is rather very unlikley when doing the put, we shouldn't have an issue just doing the bpf_prog_get() + prog->type != type check, but actually not taking the ref at all (due to being in fdget() / fdput() section of the bpf fd) is even cleaner and makes the diff smaller as well, so just go for that. Callsites are changed to make use of the new helper where possible. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: introduce NETDEV_CHANGE_TX_QUEUE_LENJason Wang2016-07-012-5/+26
| | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a new event - NETDEV_CHANGE_TX_QUEUE_LEN, this will be triggered when tx_queue_len. It could be used by net device who want to do some processing at that time. An example is tun who may want to resize tx array when tx_queue_len is changed. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-09 17:40:04 +0100