summaryrefslogtreecommitdiffstats
path: root/net (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ipv6/ila: fix nlsize calculation for lwtunnelNicolas Dichtel2016-05-031-2/+1
| | | | | | | | | The handler 'ila_fill_encap_info' adds one attribute: ILA_ATTR_LOCATOR. Fixes: 65d7ab8de582 ("net: Identifier Locator Addressing module") CC: Tom Herbert <tom@herbertland.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* RDS: TCP: Synchronize accept() and connect() paths on t_conn_lock.Sowmini Varadhan2016-05-034-10/+33
| | | | | | | | | | | | | | | | | | | | | | | | | An arbitration scheme for duelling SYNs is implemented as part of commit 241b271952eb ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()") which ensures that both nodes involved will arrive at the same arbitration decision. However, this needs to be synchronized with an outgoing SYN to be generated by rds_tcp_conn_connect(). This commit achieves the synchronization through the t_conn_lock mutex in struct rds_tcp_connection. The rds_conn_state is checked in rds_tcp_conn_connect() after acquiring the t_conn_lock mutex. A SYN is sent out only if the RDS connection is not already UP (an UP would indicate that rds_tcp_accept_one() has completed 3WH, so no SYN needs to be generated). Similarly, the rds_conn_state is checked in rds_tcp_accept_one() after acquiring the t_conn_lock mutex. The only acceptable states (to allow continuation of the arbitration logic) are UP (i.e., outgoing SYN was SYN-ACKed by peer after it sent us the SYN) or CONNECTING (we sent outgoing SYN before we saw incoming SYN). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* RDS:TCP: Synchronize rds_tcp_accept_one with rds_send_xmit when resetting t_sockSowmini Varadhan2016-05-032-17/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a race condition between rds_send_xmit -> rds_tcp_xmit and the code that deals with resolution of duelling syns added by commit 241b271952eb ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()"). Specifically, we may end up derefencing a null pointer in rds_send_xmit if we have the interleaving sequence: rds_tcp_accept_one rds_send_xmit conn is RDS_CONN_UP, so invoke rds_tcp_xmit tc = conn->c_transport_data rds_tcp_restore_callbacks /* reset t_sock */ null ptr deref from tc->t_sock The race condition can be avoided without adding the overhead of additional locking in the xmit path: have rds_tcp_accept_one wait for rds_tcp_xmit threads to complete before resetting callbacks. The synchronization can be done in the same manner as rds_conn_shutdown(). First set the rds_conn_state to something other than RDS_CONN_UP (so that new threads cannot get into rds_tcp_xmit()), then wait for RDS_IN_XMIT to be cleared in the conn->c_flags indicating that any threads in rds_tcp_xmit are done. Fixes: 241b271952eb ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Disable segmentation if checksumming is not supportedAlexander Duyck2016-05-031-1/+1
| | | | | | | | | | In the case of the mlx4 and mlx5 driver they do not support IPv6 checksum offload for tunnels. With this being the case we should disable GSO in addition to the checksum offload features when we find that a device cannot perform a checksum on a given packet type. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netem: Segment GSO packets on enqueueNeil Horman2016-05-031-2/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was recently reported to me, and reproduced on the latest net kernel, when attempting to run netperf from a host that had a netem qdisc attached to the egress interface: [ 788.073771] ---------------------[ cut here ]--------------------------- [ 788.096716] WARNING: at net/core/dev.c:2253 skb_warn_bad_offload+0xcd/0xda() [ 788.129521] bnx2: caps=(0x00000001801949b3, 0x0000000000000000) len=2962 data_len=0 gso_size=1448 gso_type=1 ip_summed=3 [ 788.182150] Modules linked in: sch_netem kvm_amd kvm crc32_pclmul ipmi_ssif ghash_clmulni_intel sp5100_tco amd64_edac_mod aesni_intel lrw gf128mul glue_helper ablk_helper edac_mce_amd cryptd pcspkr sg edac_core hpilo ipmi_si i2c_piix4 k10temp fam15h_power hpwdt ipmi_msghandler shpchp acpi_power_meter pcc_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ahci ata_generic pata_acpi ttm libahci crct10dif_pclmul pata_atiixp tg3 libata crct10dif_common drm crc32c_intel ptp serio_raw bnx2 r8169 hpsa pps_core i2c_core mii dm_mirror dm_region_hash dm_log dm_mod [ 788.465294] CPU: 16 PID: 0 Comm: swapper/16 Tainted: G W ------------ 3.10.0-327.el7.x86_64 #1 [ 788.511521] Hardware name: HP ProLiant DL385p Gen8, BIOS A28 12/17/2012 [ 788.542260] ffff880437c036b8 f7afc56532a53db9 ffff880437c03670 ffffffff816351f1 [ 788.576332] ffff880437c036a8 ffffffff8107b200 ffff880633e74200 ffff880231674000 [ 788.611943] 0000000000000001 0000000000000003 0000000000000000 ffff880437c03710 [ 788.647241] Call Trace: [ 788.658817] <IRQ> [<ffffffff816351f1>] dump_stack+0x19/0x1b [ 788.686193] [<ffffffff8107b200>] warn_slowpath_common+0x70/0xb0 [ 788.713803] [<ffffffff8107b29c>] warn_slowpath_fmt+0x5c/0x80 [ 788.741314] [<ffffffff812f92f3>] ? ___ratelimit+0x93/0x100 [ 788.767018] [<ffffffff81637f49>] skb_warn_bad_offload+0xcd/0xda [ 788.796117] [<ffffffff8152950c>] skb_checksum_help+0x17c/0x190 [ 788.823392] [<ffffffffa01463a1>] netem_enqueue+0x741/0x7c0 [sch_netem] [ 788.854487] [<ffffffff8152cb58>] dev_queue_xmit+0x2a8/0x570 [ 788.880870] [<ffffffff8156ae1d>] ip_finish_output+0x53d/0x7d0 ... The problem occurs because netem is not prepared to handle GSO packets (as it uses skb_checksum_help in its enqueue path, which cannot manipulate these frames). The solution I think is to simply segment the skb in a simmilar fashion to the way we do in __dev_queue_xmit (via validate_xmit_skb), with some minor changes. When we decide to corrupt an skb, if the frame is GSO, we segment it, corrupt the first segment, and enqueue the remaining ones. tested successfully by myself on the latest net kernel, to which this applies Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: "David S. Miller" <davem@davemloft.net> CC: netem@lists.linux-foundation.org CC: eric.dumazet@gmail.com CC: stephen@networkplumber.org Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller2016-05-036-56/+41
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Antonio Quartulli says: ==================== In this small batch of patches you have: - a fix for our Distributed ARP Table that makes sure that the input provided to the hash function during a query is the same as the one provided during an insert (so to prevent false negatives), by Antonio Quartulli - a fix for our new protocol implementation B.A.T.M.A.N. V that ensures that a hard interface is properly re-activated when it is brought down and then up again, by Antonio Quartulli - two fixes respectively to the reference counting of the tt_local_entry and neigh_node objects, by Sven Eckelmann. Such bug is rather severe as it would prevent the netdev objects references by batman-adv from being released after shutdown. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * batman-adv: Fix reference counting of hardif_neigh_node object for neigh_nodeSven Eckelmann2016-04-292-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The batadv_neigh_node was specific to a batadv_hardif_neigh_node and held an implicit reference to it. But this reference was never stored in form of a pointer in the batadv_neigh_node itself. Instead batadv_neigh_node_release depends on a consistent state of hard_iface->neigh_list and that batadv_hardif_neigh_get always returns the batadv_hardif_neigh_node object which it has a reference for. But batadv_hardif_neigh_get cannot guarantee that because it is working only with rcu_read_lock on this list. It can therefore happen that a neigh_addr is in this list twice or that batadv_hardif_neigh_get cannot find the batadv_hardif_neigh_node for an neigh_addr due to some other list operations taking place at the same time. Instead add a batadv_hardif_neigh_node pointer directly in batadv_neigh_node which will be used for the reference counter decremented on release of batadv_neigh_node. Fixes: cef63419f7db ("batman-adv: add list of unique single hop neighbors per hard-interface") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
| * batman-adv: Fix reference counting of vlan object for tt_local_entrySven Eckelmann2016-04-292-38/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The batadv_tt_local_entry was specific to a batadv_softif_vlan and held an implicit reference to it. But this reference was never stored in form of a pointer in the tt_local_entry itself. Instead batadv_tt_local_remove, batadv_tt_local_table_free and batadv_tt_local_purge_pending_clients depend on a consistent state of bat_priv->softif_vlan_list and that batadv_softif_vlan_get always returns the batadv_softif_vlan object which it has a reference for. But batadv_softif_vlan_get cannot guarantee that because it is working only with rcu_read_lock on this list. It can therefore happen that an vid is in this list twice or that batadv_softif_vlan_get cannot find the batadv_softif_vlan for an vid due to some other list operations taking place at the same time. Instead add a batadv_softif_vlan pointer directly in batadv_tt_local_entry which will be used for the reference counter decremented on release of batadv_tt_local_entry. Fixes: 35df3b298fc8 ("batman-adv: fix TT VLAN inconsistency on VLAN re-add") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
| * batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP eventAntonio Quartulli2016-04-293-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the moment there is no explicit reactivation of an hard-interface upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is reactivated as soon as the next OGM is scheduled for sending, but this mechanism does not work with B.A.T.M.A.N. V. The latter does not rely on the same scheduling mechanism as its predecessor and for this reason the hard-interface remains deactivated forever after being brought down once. This patch fixes the reactivation mechanism by adding a new routing API which explicitly allows each algorithm to perform any needed operation upon interface re-activation. Such API is optional and is implemented by B.A.T.M.A.N. V only and it just takes care of setting the iface status to ACTIVE Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
| * batman-adv: fix DAT candidate selection (must use vid)Antonio Quartulli2016-04-291-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | Now that DAT is VLAN aware, it must use the VID when computing the DHT address of the candidate nodes where an entry is going to be stored/retrieved. Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2016-05-0211-19/+57
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) MODULE_FIRMWARE firmware string not correct for iwlwifi 8000 chips, from Sara Sharon. 2) Fix SKB size checks in batman-adv stack on receive, from Sven Eckelmann. 3) Leak fix on mac80211 interface add error paths, from Johannes Berg. 4) Cannot invoke napi_disable() with BH disabled in myri10ge driver, fix from Stanislaw Gruszka. 5) Fix sign extension problem when computing feature masks in net_gso_ok(), from Marcelo Ricardo Leitner. 6) lan78xx driver doesn't count packets and packet lengths in its statistics properly, fix from Woojung Huh. 7) Fix the buffer allocation sizes in pegasus USB driver, from Petko Manolov. 8) Fix refcount overflows in bpf, from Alexei Starovoitov. 9) Unified dst cache handling introduced a preempt warning in ip_tunnel, fix by resetting rather then setting the cached route. From Paolo Abeni. 10) Listener hash collision test fix in soreuseport, from Craig Gallak * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) gre: do not pull header in ICMP error processing net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case tipc: only process unicast on intended node cxgb3: fix out of bounds read net/smscx5xx: use the device tree for mac address soreuseport: Fix TCP listener hash collision net: l2tp: fix reversed udp6 checksum flags ip_tunnel: fix preempt warning in ip tunnel creation/updating samples/bpf: fix trace_output example bpf: fix check_map_func_compatibility logic bpf: fix refcnt overflow drivers: net: cpsw: use of_phy_connect() in fixed-link case dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive drivers: net: cpsw: don't ignore phy-mode if phy-handle is used drivers: net: cpsw: fix segfault in case of bad phy-handle drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config MAINTAINERS: net: Change maintainer for GRETH 10/100/1G Ethernet MAC device driver gre: reject GUE and FOU in collect metadata mode pegasus: fixes reported packet length pegasus: fixes URB buffer allocation size; ...
| * | gre: do not pull header in ICMP error processingJiri Benc2016-05-021-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iptunnel_pull_header expects that IP header was already pulled; with this expectation, it pulls the tunnel header. This is not true in gre_err. Furthermore, ipv4_update_pmtu and ipv4_redirect expect that skb->data points to the IP header. We cannot pull the tunnel header in this path. It's just a matter of not calling iptunnel_pull_header - we don't need any of its effects. Fixes: bda7bb463436 ("gre: Allow multiple protocol listener for gre protocol.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tipc: only process unicast on intended nodeHamish Martin2016-05-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have observed complete lock up of broadcast-link transmission due to unacknowledged packets never being removed from the 'transmq' queue. This is traced to nodes having their ack field set beyond the sequence number of packets that have actually been transmitted to them. Consider an example where node 1 has sent 10 packets to node 2 on a link and node 3 has sent 20 packets to node 2 on another link. We see examples of an ack from node 2 destined for node 3 being treated as an ack from node 2 at node 1. This leads to the ack on the node 1 to node 2 link being increased to 20 even though we have only sent 10 packets. When node 1 does get around to sending further packets, none of the packets with sequence numbers less than 21 are actually removed from the transmq. To resolve this we reinstate some code lost in commit d999297c3dbb ("tipc: reduce locking scope during packet reception") which ensures that only messages destined for the receiving node are processed by that node. This prevents the sequence numbers from getting out of sync and resolves the packet leakage, thereby resolving the broadcast-link transmission lock-ups we observed. While we are aware that this change only patches over a root problem that we still haven't identified, this is a sanity test that it is always legitimate to do. It will remain in the code even after we identify and fix the real problem. Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: John Thompson <john.thompson@alliedtelesis.co.nz> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | soreuseport: Fix TCP listener hash collisionCraig Gallek2016-05-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I forgot to include a check for listener port equality when deciding if two sockets should belong to the same reuseport group. This was not caught previously because it's only necessary when two listening sockets for the same user happen to hash to the same listener bucket. The same error does not exist in the UDP path. Fixes: c125e80b8868("soreuseport: fast reuseport TCP socket selection") Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: l2tp: fix reversed udp6 checksum flagsWang Shanker2016-05-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug which causes the behavior of whether to ignore udp6 checksum of udp6 encapsulated l2tp tunnel contrary to what userspace program requests. When the flag `L2TP_ATTR_UDP_ZERO_CSUM6_RX` is set by userspace, it is expected that udp6 checksums of received packets of the l2tp tunnel to create should be ignored. In `l2tp_netlink.c`: `l2tp_nl_cmd_tunnel_create()`, `cfg.udp6_zero_rx_checksums` is set according to the flag, and then passed to `l2tp_core.c`: `l2tp_tunnel_create()` and then `l2tp_tunnel_sock_create()`. In `l2tp_tunnel_sock_create()`, `udp_conf.use_udp6_rx_checksums` is set the same to `cfg.udp6_zero_rx_checksums`. However, if we want the checksum to be ignored, `udp_conf.use_udp6_rx_checksums` should be set to `false`, i.e. be set to the contrary. Similarly, the same should be done to `udp_conf.use_udp6_tx_checksums`. Signed-off-by: Miao Wang <shankerwangmiao@gmail.com> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ip_tunnel: fix preempt warning in ip tunnel creation/updatingPaolo Abeni2016-04-291-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the commit e09acddf873b ("ip_tunnel: replace dst_cache with generic implementation"), a preemption debug warning is triggered on ip4 tunnels updating; the dst cache helper needs to be invoked in unpreemptible context. We don't need to load the cache on tunnel update, so this commit fixes the warning replacing the load with a dst cache reset, which is preempt safe. Fixes: e09acddf873b ("ip_tunnel: replace dst_cache with generic implementation") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gre: reject GUE and FOU in collect metadata modeJiri Benc2016-04-281-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The collect metadata mode does not support GUE nor FOU. This might be implemented later; until then, we should reject such config. I think this is okay to be changed. It's unlikely anyone has such configuration (as it doesn't work anyway) and we may need a way to distinguish whether it's supported or not by the kernel later. For backwards compatibility with iproute2, it's not possible to just check the attribute presence (iproute2 always includes the attribute), the actual value has to be checked, too. Fixes: 2e15ea390e6f4 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gre: build header correctly for collect metadata tunnelsJiri Benc2016-04-281-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | In ipgre (i.e. not gretap) + collect metadata mode, the skb was assumed to contain Ethernet header and was encapsulated as ETH_P_TEB. This is not the case, the interface is ARPHRD_IPGRE and the protocol to be used for encapsulation is skb->protocol. Fixes: 2e15ea390e6f4 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gre: do not assign header_ops in collect metadata modeJiri Benc2016-04-281-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In ipgre mode (i.e. not gretap) with collect metadata flag set, the tunnel is incorrectly assumed to be mGRE in NBMA mode (see commit 6a5f44d7a048c). This is not the case, we're controlling the encapsulation addresses by lwtunnel metadata. And anyway, assigning dev->header_ops in collect metadata mode does not make sense. Although it would be more user firendly to reject requests that specify both the collect metadata flag and a remote/local IP address, this would break current users of gretap or introduce ugly code and differences in handling ipgre and gretap configuration. Keep the current behavior of remote/local IP address being ignored in such case. v3: Back to v1, added explanation paragraph. v2: Reject configuration specifying both remote/local address and collect metadata flag. Fixes: 2e15ea390e6f4 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge tag 'mac80211-for-davem-2016-04-27' of ↵David S. Miller2016-04-281-2/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a single fix, for a per-CPU memory leak in a (root user triggerable) error case. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * mac80211: fix statistics leak if dev_alloc_name() failsJohannes Berg2016-04-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case that dev_alloc_name() fails, e.g. because the name was given by the user and already exists, we need to clean up properly and free the per-CPU statistics. Fix that. Cc: stable@vger.kernel.org Fixes: 5a490510ba5f ("mac80211: use per-CPU TX/RX statistics") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller2016-04-285-4/+23
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Antonio Quartulli says: ==================== In this patchset you can find the following fixes: 1) check skb size to avoid reading beyond its border when delivering payloads, by Sven Eckelmann 2) initialize last_seen time in neigh_node object to prevent cleanup routine from accidentally purge it, by Marek Lindner 3) release "recently added" slave interfaces upon virtual/batman interface shutdown, by Sven Eckelmann 4) properly decrease router object reference counter upon routing table update, by Sven Eckelmann 5) release queue slots when purging OGM packets of deactivating slave interface, by Linus Lüssing Patch 2 and 3 have no "Fixes:" tag because the offending commits date back to when batman-adv was not yet officially in the net tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | batman-adv: Fix broadcast/ogm queue limit on a removed interfaceLinus Lüssing2016-04-241-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When removing a single interface while a broadcast or ogm packet is still pending then we will free the forward packet without releasing the queue slots again. This patch is supposed to fix this issue. Fixes: 6d5808d4ae1b ("batman-adv: Add missing hardif_free_ref in forw_packet_free") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
| | * | batman-adv: Reduce refcnt of removed router when updating routeSven Eckelmann2016-04-241-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _batadv_update_route rcu_derefences orig_ifinfo->router outside of a spinlock protected region to print some information messages to the debug log. But this pointer is not checked again when the new pointer is assigned in the spinlock protected region. Thus is can happen that the value of orig_ifinfo->router changed in the meantime and thus the reference counter of the wrong router gets reduced after the spinlock protected region. Just rcu_dereferencing the value of orig_ifinfo->router inside the spinlock protected region (which also set the new pointer) is enough to get the correct old router object. Fixes: e1a5382f978b ("batman-adv: Make orig_node->router an rcu protected pointer") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
| | * | batman-adv: Deactivate TO_BE_ACTIVATED hardif on shutdownSven Eckelmann2016-04-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The shutdown of an batman-adv interface can happen with one of its slave interfaces still being in the BATADV_IF_TO_BE_ACTIVATED state. A possible reason for it is that the routing algorithm BATMAN_V was selected and batadv_schedule_bat_ogm was not yet called for this interface. This slave interface still has to be set to BATADV_IF_INACTIVE or the batman-adv interface will never reduce its usage counter and thus never gets shutdown. This problem can be simulated via: $ modprobe dummy $ modprobe batman-adv routing_algo=BATMAN_V $ ip link add bat0 type batadv $ ip link set dummy0 master bat0 $ ip link set dummy0 up $ ip link del bat0 unregister_netdevice: waiting for bat0 to become free. Usage count = 3 Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
| | * | batman-adv: init neigh node last seen fieldMarek Lindner2016-04-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <a@unstable.cc>
| | * | batman-adv: Check skb size before using encapsulated ETH+VLAN headerSven Eckelmann2016-04-241-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The encapsulated ethernet and VLAN header may be outside the received ethernet frame. Thus the skb buffer size has to be checked before it can be parsed to find out if it encapsulates another batman-adv packet. Fixes: 420193573f11 ("batman-adv: softif bridge loop avoidance") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2016-04-296-55/+55
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "There is a lifecycle fix in the auth code, a fix for a narrow race condition on map, and a helpful message in the log when there is a feature mismatch (which happens frequently now that the default server-side options have changed)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: report unsupported features to syslog rbd: fix rbd map vs notify races libceph: make authorizer destruction independent of ceph_auth_client
| * | | libceph: make authorizer destruction independent of ceph_auth_clientIlya Dryomov2016-04-256-55/+55
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting the kernel client with cephx disabled and then enabling cephx and restarting userspace daemons can result in a crash: [262671.478162] BUG: unable to handle kernel paging request at ffffebe000000000 [262671.531460] IP: [<ffffffff811cd04a>] kfree+0x5a/0x130 [262671.584334] PGD 0 [262671.635847] Oops: 0000 [#1] SMP [262672.055841] CPU: 22 PID: 2961272 Comm: kworker/22:2 Not tainted 4.2.0-34-generic #39~14.04.1-Ubuntu [262672.162338] Hardware name: Dell Inc. PowerEdge R720/068CDY, BIOS 2.4.3 07/09/2014 [262672.268937] Workqueue: ceph-msgr con_work [libceph] [262672.322290] task: ffff88081c2d0dc0 ti: ffff880149ae8000 task.ti: ffff880149ae8000 [262672.428330] RIP: 0010:[<ffffffff811cd04a>] [<ffffffff811cd04a>] kfree+0x5a/0x130 [262672.535880] RSP: 0018:ffff880149aeba58 EFLAGS: 00010286 [262672.589486] RAX: 000001e000000000 RBX: 0000000000000012 RCX: ffff8807e7461018 [262672.695980] RDX: 000077ff80000000 RSI: ffff88081af2be04 RDI: 0000000000000012 [262672.803668] RBP: ffff880149aeba78 R08: 0000000000000000 R09: 0000000000000000 [262672.912299] R10: ffffebe000000000 R11: ffff880819a60e78 R12: ffff8800aec8df40 [262673.021769] R13: ffffffffc035f70f R14: ffff8807e5b138e0 R15: ffff880da9785840 [262673.131722] FS: 0000000000000000(0000) GS:ffff88081fac0000(0000) knlGS:0000000000000000 [262673.245377] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [262673.303281] CR2: ffffebe000000000 CR3: 0000000001c0d000 CR4: 00000000001406e0 [262673.417556] Stack: [262673.472943] ffff880149aeba88 ffff88081af2be04 ffff8800aec8df40 ffff88081af2be04 [262673.583767] ffff880149aeba98 ffffffffc035f70f ffff880149aebac8 ffff8800aec8df00 [262673.694546] ffff880149aebac8 ffffffffc035c89e ffff8807e5b138e0 ffff8805b047f800 [262673.805230] Call Trace: [262673.859116] [<ffffffffc035f70f>] ceph_x_destroy_authorizer+0x1f/0x50 [libceph] [262673.968705] [<ffffffffc035c89e>] ceph_auth_destroy_authorizer+0x3e/0x60 [libceph] [262674.078852] [<ffffffffc0352805>] put_osd+0x45/0x80 [libceph] [262674.134249] [<ffffffffc035290e>] remove_osd+0xae/0x140 [libceph] [262674.189124] [<ffffffffc0352aa3>] __reset_osd+0x103/0x150 [libceph] [262674.243749] [<ffffffffc0354703>] kick_requests+0x223/0x460 [libceph] [262674.297485] [<ffffffffc03559e2>] ceph_osdc_handle_map+0x282/0x5e0 [libceph] [262674.350813] [<ffffffffc035022e>] dispatch+0x4e/0x720 [libceph] [262674.403312] [<ffffffffc034bd91>] try_read+0x3d1/0x1090 [libceph] [262674.454712] [<ffffffff810ab7c2>] ? dequeue_entity+0x152/0x690 [262674.505096] [<ffffffffc034cb1b>] con_work+0xcb/0x1300 [libceph] [262674.555104] [<ffffffff8108fb3e>] process_one_work+0x14e/0x3d0 [262674.604072] [<ffffffff810901ea>] worker_thread+0x11a/0x470 [262674.652187] [<ffffffff810900d0>] ? rescuer_thread+0x310/0x310 [262674.699022] [<ffffffff810957a2>] kthread+0xd2/0xf0 [262674.744494] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0 [262674.789543] [<ffffffff817bd81f>] ret_from_fork+0x3f/0x70 [262674.834094] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0 What happens is the following: (1) new MON session is established (2) old "none" ac is destroyed (3) new "cephx" ac is constructed ... (4) old OSD session (w/ "none" authorizer) is put ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer) osd->o_auth.authorizer in the "none" case is just a bare pointer into ac, which contains a single static copy for all services. By the time we get to (4), "none" ac, freed in (2), is long gone. On top of that, a new vtable installed in (3) points us at ceph_x_destroy_authorizer(), so we end up trying to destroy a "none" authorizer with a "cephx" destructor operating on invalid memory! To fix this, decouple authorizer destruction from ac and do away with a single static "none" authorizer by making a copy for each OSD or MDS session. Authorizers themselves are independent of ac and so there is no reason for destroy_authorizer() to be an ac op. Make it an op on the authorizer itself by turning ceph_authorizer into a real struct. Fixes: http://tracker.ceph.com/issues/15447 Reported-by: Alan Zhang <alan.zhang@linux.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
* | | net: ipv6: Delete host routes on an ifdownDavid Ahern2016-04-261-33/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was a simple idea -- save IPv6 configured addresses on a link down so that IPv6 behaves similar to IPv4. As always the devil is in the details and the IPv6 stack as too many behavioral differences from IPv4 making the simple idea more complicated than it needs to be. The current implementation for keeping IPv6 addresses can panic or spit out a warning in one of many paths: 1. IPv6 route gets an IPv4 route as its 'next' which causes a panic in rt6_fill_node while handling a route dump request. 2. rt->dst.obsolete is set to DST_OBSOLETE_DEAD hitting the WARN_ON in fib6_del 3. Panic in fib6_purge_rt because rt6i_ref count is not 1. The root cause of all these is references related to the host route for an address that is retained. So, this patch deletes the host route every time the ifdown loop runs. Since the host route is deleted and will be re-generated an up there is no longer a need for the l3mdev fix up. On the 'admin up' side move addrconf_permanent_addr into the NETDEV_UP event handling so that it runs only once versus on UP and CHANGE events. All of the current panics and warnings appear to be related to addresses on the loopback device, but given the catastrophic nature when a bug is triggered this patch takes the conservative approach and evicts all host routes rather than trying to determine when it can be re-used and when it can not. That can be a later optimizaton if desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Revert "ipv6: Revert optional address flusing on ifdown."David S. Miller2016-04-261-12/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 841645b5f2dfceac69b78fcd0c9050868d41ea61. Ok, this puts the feature back. I've decided to apply David A.'s bug fix and run with that rather than make everyone wait another whole release for this feature. Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ipv6: Revert optional address flusing on ifdown.David S. Miller2016-04-251-150/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts the following three commits: 70af921db6f8835f4b11c65731116560adb00c14 799977d9aafbf0ca0b9c39b04cbfb16db71302c9 f1705ec197e705b79ea40fe7a2cc5acfa1d3bfac The feature was ill conceived, has terrible semantics, and has added nothing but regressions to the already fragile ipv6 stack. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ipv4/fib: don't warn when primary address is missing if in_dev is deadPaolo Abeni2016-04-251-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit fbd40ea0180a ("ipv4: Don't do expensive useless work during inetdev destroy.") when deleting an interface, fib_del_ifaddr() can be executed without any primary address present on the dead interface. The above is safe, but triggers some "bug: prim == NULL" warnings. This commit avoids warning if the in_dev is dead Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | bridge: mdb: Marking port-group as offloadedElad Raz2016-04-243-32/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a race-condition when updating the mdb offload flag without using the mulicast_lock. This reverts commit 9e8430f8d60d98 ("bridge: mdb: Passing the port-group pointer to br_mdb module"). This patch marks offloaded MDB entry as "offload" by changing the port- group flags and marks it as MDB_PG_FLAGS_OFFLOAD. When switchdev PORT_MDB succeeded and adds a multicast group, a completion callback is been invoked "br_mdb_complete". The completion function locks the multicast_lock and finds the right net_bridge_port_group and marks it as offloaded. Fixes: 9e8430f8d60d98 ("bridge: mdb: Passing the port-group pointer to br_mdb module") Reported-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | bridge: mdb: Common function for mdb entry translationElad Raz2016-04-241-18/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is duplicate code that translates br_mdb_entry to br_ip let's wrap it in a common function. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | switchdev: Adding complete operation to deferred switchdev opsElad Raz2016-04-241-0/+6
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation is executed in different context and the application doesn't have any way to get the operation real status. Adding a completion callback fixes that. This patch adds fields to switchdev_attr and switchdev_obj "complete_priv" field which is used by the "complete" callback. Application can set a complete function which will be called once the operation executed. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2016-04-2129-133/+298
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix memory leak in iwlwifi, from Matti Gottlieb. 2) Add missing registration of netfilter arp_tables into initial namespace, from Florian Westphal. 3) Fix potential NULL deref in DecNET routing code. 4) Restrict NETLINK_URELEASE to truly bound sockets only, from Dmitry Ivanov. 5) Fix dst ref counting in VRF, from David Ahern. 6) Fix TSO segmenting limits in i40e driver, from Alexander Duyck. 7) Fix heap leak in PACKET_DIAG_MCLIST, from Mathias Krause. 8) Ravalidate IPV6 datagram socket cached routes properly, particularly with UDP, from Martin KaFai Lau. 9) Fix endian bug in RDS dp_ack_seq handling, from Qing Huang. 10) Fix stats typing in bcmgenet driver, from Eric Dumazet. 11) Openvswitch needs to orphan SKBs before ipv6 fragmentation handing, from Joe Stringer. 12) SPI device reference leak in spi_ks8895 PHY driver, from Mark Brown. 13) atl2 doesn't actually support scatter-gather, so don't advertise the feature. From Ben Hucthings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) openvswitch: use flow protocol when recalculating ipv6 checksums Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packets atl2: Disable unimplemented scatter/gather feature net/mlx4_en: Split SW RX dropped counter per RX ring net/mlx4_core: Don't allow to VF change global pause settings net/mlx4_core: Avoid repeated calls to pci enable/disable net/mlx4_core: Implement pci_resume callback net: phy: spi_ks8895: Don't leak references to SPI devices net: ethernet: davinci_emac: Fix platform_data overwrite net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enable qede: Fix single MTU sized packet from firmware GRO flow qede: Fix setting Skb network header qede: Fix various memory allocation error flows for fastpath tcp: Merge tx_flags and tskey in tcp_shifted_skb tcp: Merge tx_flags and tskey in tcp_collapse_retrans drivers: net: cpsw: fix wrong regs access in cpsw_ndo_open tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acks openvswitch: Orphan skbs before IPv6 defrag Revert "Prevent NUll pointer dereference with two PHYs on cpsw" VSOCK: Only check error on skb_recv_datagram when skb is NULL ...
| * | openvswitch: use flow protocol when recalculating ipv6 checksumsSimon Horman2016-04-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using masked actions the ipv6_proto field of an action to set IPv6 fields may be zero rather than the prevailing protocol which will result in skipping checksum recalculation. This patch resolves the problem by relying on the protocol in the flow key rather than that in the set field action. Fixes: 83d2b9ba1abc ("net: openvswitch: Support masked set actions.") Cc: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tcp: Merge tx_flags and tskey in tcp_shifted_skbMartin KaFai Lau2016-04-212-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After receiving sacks, tcp_shifted_skb() will collapse skbs if possible. tx_flags and tskey also have to be merged. This patch reuses the tcp_skb_collapse_tstamp() to handle them. BPF Output Before: ~~~~~ <no-output-due-to-missing-tstamp-event> BPF Output After: ~~~~~ <...>-2024 [007] d.s. 88.644374: : ee_data:14599 Packetdrill Script: ~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 1460) = 1460 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tcp: Merge tx_flags and tskey in tcp_collapse_retransMartin KaFai Lau2016-04-211-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If two skbs are merged/collapsed during retransmission, the current logic does not merge the tx_flags and tskey. The end result is the SCM_TSTAMP_ACK timestamp could be missing for a packet. The patch: 1. Merge the tx_flags 2. Overwrite the prev_skb's tskey with the next_skb's tskey BPF Output Before: ~~~~~~ <no-output-due-to-missing-tstamp-event> BPF Output After: ~~~~~~ packetdrill-2092 [001] d.s. 453.998486: : ee_data:1459 Packetdrill Script: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 730) = 730 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 730) = 730 +0 setsockopt(4, SOL_SOCKET, 37, [2176], 4) = 0 0.200 write(4, ..., 11680) = 11680 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 > P. 1:731(730) ack 1 0.200 > P. 731:1461(730) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:13141(4380) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 13141 win 257 0.400 close(4) = 0 0.400 > F. 13141:13141(0) ack 1 0.500 < F. 1:1(0) ack 13142 win 257 0.500 > . 13142:13142(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acksMartin KaFai Lau2016-04-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assuming SOF_TIMESTAMPING_TX_ACK is on. When dup acks are received, it could incorrectly think that a skb has already been acked and queue a SCM_TSTAMP_ACK cmsg to the sk->sk_error_queue. In tcp_ack_tstamp(), it checks 'between(shinfo->tskey, prior_snd_una, tcp_sk(sk)->snd_una - 1)'. If prior_snd_una == tcp_sk(sk)->snd_una like the following packetdrill script, between() returns true but the tskey is actually not acked. e.g. try between(3, 2, 1). The fix is to replace between() with one before() and one !before(). By doing this, the -1 offset on the tcp_sk(sk)->snd_una can also be removed. A packetdrill script is used to reproduce the dup ack scenario. Due to the lacking cmsg support in packetdrill (may be I cannot find it), a BPF prog is used to kprobe to sock_queue_err_skb() and print out the value of serr->ee.ee_data. Both the packetdrill and the bcc BPF script is attached at the end of this commit message. BPF Output Before Fix: ~~~~~~ <...>-2056 [001] d.s. 433.927987: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 433.929563: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 433.930765: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 434.028177: : ee_data:1459 packetdrill-2056 [001] d.s. 434.029686: : ee_data:14599 BPF Output After Fix: ~~~~~~ <...>-2049 [000] d.s. 113.517039: : ee_data:1459 <...>-2049 [000] d.s. 113.517253: : ee_data:14599 BCC BPF Script: ~~~~~~ #!/usr/bin/env python from __future__ import print_function from bcc import BPF bpf_text = """ #include <uapi/linux/ptrace.h> #include <net/sock.h> #include <bcc/proto.h> #include <linux/errqueue.h> #ifdef memset #undef memset #endif int trace_err_skb(struct pt_regs *ctx) { struct sk_buff *skb = (struct sk_buff *)ctx->si; struct sock *sk = (struct sock *)ctx->di; struct sock_exterr_skb *serr; u32 ee_data = 0; if (!sk || !skb) return 0; serr = SKB_EXT_ERR(skb); bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data); bpf_trace_printk("ee_data:%u\\n", ee_data); return 0; }; """ b = BPF(text=bpf_text) b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb") print("Attached to kprobe") b.trace_print() Packetdrill Script: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 1460) = 1460 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil.kdev@gmail.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | openvswitch: Orphan skbs before IPv6 defragJoe Stringer2016-04-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the IPv6 counterpart to commit 8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()"). Prior to commit 029f7f3b8701 ("netfilter: ipv6: nf_defrag: avoid/free clone operations"), ipv6 fragments sent to nf_ct_frag6_gather() would be cloned (implicitly orphaning) prior to queueing for reassembly. As such, when the IPv6 message is eventually reassembled, the skb->sk for all fragments would be NULL. After that commit was introduced, rather than cloning, the original skbs were queued directly without orphaning. The end result is that all frags except for the first and last may have a socket attached. This commit explicitly orphans such skbs during nf_ct_frag6_gather() to prevent BUG_ON(skb->sk) during a later call to ip6_fragment(). kernel BUG at net/ipv6/ip6_output.c:631! [...] Call Trace: <IRQ> [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0 [<ffffffffa042c7c0>] ? do_output.isra.28+0x1b0/0x1b0 [openvswitch] [<ffffffff810bb8a2>] ? __lock_is_held+0x52/0x70 [<ffffffffa042c587>] ovs_fragment+0x1f7/0x280 [openvswitch] [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0 [<ffffffff817be416>] ? _raw_spin_unlock_irqrestore+0x36/0x50 [<ffffffff81697ea0>] ? dst_discard_out+0x20/0x20 [<ffffffff81697e80>] ? dst_ifdown+0x80/0x80 [<ffffffffa042c703>] do_output.isra.28+0xf3/0x1b0 [openvswitch] [<ffffffffa042d279>] do_execute_actions+0x709/0x12c0 [openvswitch] [<ffffffffa04340a4>] ? ovs_flow_stats_update+0x74/0x1e0 [openvswitch] [<ffffffffa04340d1>] ? ovs_flow_stats_update+0xa1/0x1e0 [openvswitch] [<ffffffff817be387>] ? _raw_spin_unlock+0x27/0x40 [<ffffffffa042de75>] ovs_execute_actions+0x45/0x120 [openvswitch] [<ffffffffa0432d65>] ovs_dp_process_packet+0x85/0x150 [openvswitch] [<ffffffff817be387>] ? _raw_spin_unlock+0x27/0x40 [<ffffffffa042def4>] ovs_execute_actions+0xc4/0x120 [openvswitch] [<ffffffffa0432d65>] ovs_dp_process_packet+0x85/0x150 [openvswitch] [<ffffffffa04337f2>] ? key_extract+0x442/0xc10 [openvswitch] [<ffffffffa043b26d>] ovs_vport_receive+0x5d/0xb0 [openvswitch] [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0 [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0 [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0 [<ffffffff817be416>] ? _raw_spin_unlock_irqrestore+0x36/0x50 [<ffffffffa043c11d>] internal_dev_xmit+0x6d/0x150 [openvswitch] [<ffffffffa043c0b5>] ? internal_dev_xmit+0x5/0x150 [openvswitch] [<ffffffff8168fb5f>] dev_hard_start_xmit+0x2df/0x660 [<ffffffff8168f5ea>] ? validate_xmit_skb.isra.105.part.106+0x1a/0x2b0 [<ffffffff81690925>] __dev_queue_xmit+0x8f5/0x950 [<ffffffff81690080>] ? __dev_queue_xmit+0x50/0x950 [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0 [<ffffffff81690990>] dev_queue_xmit+0x10/0x20 [<ffffffff8169a418>] neigh_resolve_output+0x178/0x220 [<ffffffff81752759>] ? ip6_finish_output2+0x219/0x7b0 [<ffffffff81752759>] ip6_finish_output2+0x219/0x7b0 [<ffffffff817525a5>] ? ip6_finish_output2+0x65/0x7b0 [<ffffffff816cde2b>] ? ip_idents_reserve+0x6b/0x80 [<ffffffff8175488f>] ? ip6_fragment+0x93f/0xc50 [<ffffffff81754af1>] ip6_fragment+0xba1/0xc50 [<ffffffff81752540>] ? ip6_flush_pending_frames+0x40/0x40 [<ffffffff81754c6b>] ip6_finish_output+0xcb/0x1d0 [<ffffffff81754dcf>] ip6_output+0x5f/0x1a0 [<ffffffff81754ba0>] ? ip6_fragment+0xc50/0xc50 [<ffffffff81797fbd>] ip6_local_out+0x3d/0x80 [<ffffffff817554df>] ip6_send_skb+0x2f/0xc0 [<ffffffff817555bd>] ip6_push_pending_frames+0x4d/0x50 [<ffffffff817796cc>] icmpv6_push_pending_frames+0xac/0xe0 [<ffffffff8177a4be>] icmpv6_echo_reply+0x42e/0x500 [<ffffffff8177acbf>] icmpv6_rcv+0x4cf/0x580 [<ffffffff81755ac7>] ip6_input_finish+0x1a7/0x690 [<ffffffff81755925>] ? ip6_input_finish+0x5/0x690 [<ffffffff817567a0>] ip6_input+0x30/0xa0 [<ffffffff81755920>] ? ip6_rcv_finish+0x1a0/0x1a0 [<ffffffff817557ce>] ip6_rcv_finish+0x4e/0x1a0 [<ffffffff8175640f>] ipv6_rcv+0x45f/0x7c0 [<ffffffff81755fe6>] ? ipv6_rcv+0x36/0x7c0 [<ffffffff81755780>] ? ip6_make_skb+0x1c0/0x1c0 [<ffffffff8168b649>] __netif_receive_skb_core+0x229/0xb80 [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0 [<ffffffff8168c07f>] ? process_backlog+0x6f/0x230 [<ffffffff8168bfb6>] __netif_receive_skb+0x16/0x70 [<ffffffff8168c088>] process_backlog+0x78/0x230 [<ffffffff8168c0ed>] ? process_backlog+0xdd/0x230 [<ffffffff8168db43>] net_rx_action+0x203/0x480 [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0 [<ffffffff817c156e>] __do_softirq+0xde/0x49f [<ffffffff81752768>] ? ip6_finish_output2+0x228/0x7b0 [<ffffffff817c070c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff8106f88b>] do_softirq.part.18+0x3b/0x40 [<ffffffff8106f946>] __local_bh_enable_ip+0xb6/0xc0 [<ffffffff81752791>] ip6_finish_output2+0x251/0x7b0 [<ffffffff81754af1>] ? ip6_fragment+0xba1/0xc50 [<ffffffff816cde2b>] ? ip_idents_reserve+0x6b/0x80 [<ffffffff8175488f>] ? ip6_fragment+0x93f/0xc50 [<ffffffff81754af1>] ip6_fragment+0xba1/0xc50 [<ffffffff81752540>] ? ip6_flush_pending_frames+0x40/0x40 [<ffffffff81754c6b>] ip6_finish_output+0xcb/0x1d0 [<ffffffff81754dcf>] ip6_output+0x5f/0x1a0 [<ffffffff81754ba0>] ? ip6_fragment+0xc50/0xc50 [<ffffffff81797fbd>] ip6_local_out+0x3d/0x80 [<ffffffff817554df>] ip6_send_skb+0x2f/0xc0 [<ffffffff817555bd>] ip6_push_pending_frames+0x4d/0x50 [<ffffffff81778558>] rawv6_sendmsg+0xa28/0xe30 [<ffffffff81719097>] ? inet_sendmsg+0xc7/0x1d0 [<ffffffff817190d6>] inet_sendmsg+0x106/0x1d0 [<ffffffff81718fd5>] ? inet_sendmsg+0x5/0x1d0 [<ffffffff8166d078>] sock_sendmsg+0x38/0x50 [<ffffffff8166d4d6>] SYSC_sendto+0xf6/0x170 [<ffffffff8100201b>] ? trace_hardirqs_on_thunk+0x1b/0x1d [<ffffffff8166e38e>] SyS_sendto+0xe/0x10 [<ffffffff817bebe5>] entry_SYSCALL_64_fastpath+0x18/0xa8 Code: 06 48 83 3f 00 75 26 48 8b 87 d8 00 00 00 2b 87 d0 00 00 00 48 39 d0 72 14 8b 87 e4 00 00 00 83 f8 01 75 09 48 83 7f 18 00 74 9a <0f> 0b 41 8b 86 cc 00 00 00 49 8# RIP [<ffffffff8175468a>] ip6_fragment+0x73a/0xc50 RSP <ffff880072803120> Fixes: 029f7f3b8701 ("netfilter: ipv6: nf_defrag: avoid/free clone operations") Reported-by: Daniele Di Proietto <diproiettod@vmware.com> Signed-off-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | VSOCK: Only check error on skb_recv_datagram when skb is NULLJorgen Hansen2016-04-201-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If skb_recv_datagram returns an skb, we should ignore the err value returned. Otherwise, datagram receives will return EAGAIN when they have to wait for a datagram. Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | RDS: Fix the atomicity for congestion map updatesantosh.shilimkar@oracle.com2016-04-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two different threads with different rds sockets may be in rds_recv_rcvbuf_delta() via receive path. If their ports both map to the same word in the congestion map, then using non-atomic ops to update it could cause the map to be incorrect. Lets use atomics to avoid such an issue. Full credit to Wengang <wen.gang.wang@oracle.com> for finding the issue, analysing it and also pointing out to offending code with spin lock based fix. Reviewed-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | RDS: fix endianness for dp_ack_seqQing Huang2016-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dp->dp_ack_seq is used in big endian format. We need to do the big endianness conversion when we assign a value in host format to it. Signed-off-by: Qing Huang <qing.huang@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | vlan: pull on __vlan_insert_tag error path and fix csum correctionDaniel Borkmann2016-04-161-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When __vlan_insert_tag() fails from skb_vlan_push() path due to the skb_cow_head(), we need to undo the __skb_push() in the error path as well that was done earlier to move skb->data pointer to mac header. Moreover, I noticed that when in the non-error path the __skb_pull() is done and the original offset to mac header was non-zero, we fixup from a wrong skb->data offset in the checksum complete processing. So the skb_postpush_rcsum() really needs to be done before __skb_pull() where skb->data still points to the mac header start and thus operates under the same conditions as in __vlan_insert_tag(). Fixes: 93515d53b133 ("net: move vlan pop/push functions into common code") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | soreuseport: fix ordering for mixed v4/v6 socketsCraig Gallek2016-04-151-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the SO_REUSEPORT socket option, it is possible to create sockets in the AF_INET and AF_INET6 domains which are bound to the same IPv4 address. This is only possible with SO_REUSEPORT and when not using IPV6_V6ONLY on the AF_INET6 sockets. Prior to the commits referenced below, an incoming IPv4 packet would always be routed to a socket of type AF_INET when this mixed-mode was used. After those changes, the same packet would be routed to the most recently bound socket (if this happened to be an AF_INET6 socket, it would have an IPv4 mapped IPv6 address). The change in behavior occurred because the recent SO_REUSEPORT optimizations short-circuit the socket scoring logic as soon as they find a match. They did not take into account the scoring logic that favors AF_INET sockets over AF_INET6 sockets in the event of a tie. To fix this problem, this patch changes the insertion order of AF_INET and AF_INET6 addresses in the TCP and UDP socket lists when the sockets have SO_REUSEPORT set. AF_INET sockets will be inserted at the head of the list and AF_INET6 sockets with SO_REUSEPORT set will always be inserted at the tail of the list. This will force AF_INET sockets to always be considered first. Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Fixes: 125e80b88687 ("soreuseport: fast reuseport TCP socket selection") Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: udp: Do a route lookup and update during release_cbMartin KaFai Lau2016-04-142-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a release_cb for UDPv6. It does a route lookup and updates sk->sk_dst_cache if it is needed. It picks up the left-over job from ip6_sk_update_pmtu() if the sk was owned by user during the pmtu update. It takes a rcu_read_lock to protect the __sk_dst_get() operations because another thread may do ip6_dst_store() without taking the sk lock (e.g. sendmsg). Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: datagram: Update dst cache of a connected datagram sk during pmtu updateMartin KaFai Lau2016-04-142-9/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a case in connected UDP socket such that getsockopt(IPV6_MTU) will return a stale MTU value. The reproducible sequence could be the following: 1. Create a connected UDP socket 2. Send some datagrams out 3. Receive a ICMPV6_PKT_TOOBIG 4. No new outgoing datagrams to trigger the sk_dst_check() logic to update the sk->sk_dst_cache. 5. getsockopt(IPV6_MTU) returns the mtu from the invalid sk->sk_dst_cache instead of the newly created RTF_CACHE clone. This patch updates the sk->sk_dst_cache for a connected datagram sk during pmtu-update code path. Note that the sk->sk_v6_daddr is used to do the route lookup instead of skb->data (i.e. iph). It is because a UDP socket can become connected after sending out some datagrams in un-connected state. or It can be connected multiple times to different destinations. Hence, iph may not be related to where sk is currently connected to. It is done under '!sock_owned_by_user(sk)' condition because the user may make another ip6_datagram_connect() (i.e changing the sk->sk_v6_daddr) while dst lookup is happening in the pmtu-update code path. For the sock_owned_by_user(sk) == true case, the next patch will introduce a release_cb() which will update the sk->sk_dst_cache. Test: Server (Connected UDP Socket): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Route Details: [root@arch-fb-vm1 ~]# ip -6 r show | egrep '2fac' 2fac::/64 dev eth0 proto kernel metric 256 pref medium 2fac:face::/64 via 2fac::face dev eth0 metric 1024 pref medium A simple python code to create a connected UDP socket: import socket import errno HOST = '2fac::1' PORT = 8080 s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) s.bind((HOST, PORT)) s.connect(('2fac:face::face', 53)) print("connected") while True: try: data = s.recv(1024) except socket.error as se: if se.errno == errno.EMSGSIZE: pmtu = s.getsockopt(41, 24) print("PMTU:%d" % pmtu) break s.close() Python program output after getting a ICMPV6_PKT_TOOBIG: [root@arch-fb-vm1 ~]# python2 ~/devshare/kernel/tasks/fib6/udp-connect-53-8080.py connected PMTU:1300 Cache routes after recieving TOOBIG: [root@arch-fb-vm1 ~]# ip -6 r show table cache 2fac:face::face via 2fac::face dev eth0 metric 0 cache expires 463sec mtu 1300 pref medium Client (Send the ICMPV6_PKT_TOOBIG): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scapy is used to generate the TOOBIG message. Here is the scapy script I have used: >>> p=Ether(src='da:75:4d:36:ac:32', dst='52:54:00:12:34:66', type=0x86dd)/IPv6(src='2fac::face', dst='2fac::1')/ICMPv6PacketTooBig(mtu=1300)/IPv6(src='2fac:: 1',dst='2fac:face::face', nh='UDP')/UDP(sport=8080,dport=53) >>> sendp(p, iface='qemubr0') Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: datagram: Refactor dst lookup and update codes to a new functionMartin KaFai Lau2016-04-141-46/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the route lookup and update codes for connected datagram sk to a newly created function ip6_datagram_dst_update() It will be reused during the pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 11:21:22 +0100