| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add compatible for MT7981 SoC.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem-apple-efuses.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_brcm_nvram.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_u-boot-env.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Request a PPI for each vCPU during probe which will be used by the host
to communicate a stall detected event on the vCPU. When the host raises
this interrupt from the virtual machine monitor, the guest is expected to
handle the interrupt and panic.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240703153732.3214238-3-sebastianene@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vcpu stall detector allows the host to monitor the availability of a
guest VM. Introduce a PPI interrupt which can be injected from the host
into the virtual gic to let the guest reboot itself.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240703153732.3214238-2-sebastianene@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The KEBA CP500 system FPGA is a PCIe device, which consists of multiple
IP cores. Every IP core has its own auxiliary driver. The cp500 driver
registers an auxiliary device for each device and the corresponding
drivers are loaded by the Linux driver infrastructure.
Currently 3 variants of this device exists. Every variant has its own
PCI device ID, which is used to determine the list of available IP
cores. In this first version only the auxiliary device for the I2C
controller is registered.
Besides the auxiliary device registration some other basic functions of
the FPGA are implemented; e.g, FPGA version sysfs file, keep FPGA
configuration on reset sysfs file, error message for errors on the
internal AXI bus of the FPGA.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20240630194740.7137-2-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DDR4 DIMMS implementing SPD Annex L, Revision 1 do not implement SPD byte
14 (Module Temperature Sensor); this byte was only added in revision 2 of
the standard. This only applies to DDR4, not DDR4E or LPDDR4, since those
DDR types were only introduced in revision 3 of the standard.
Use this information to instantiate the jc42 device if the module is a DDR4
following SPD revision 1.0 and a device is detected at the expected thermal
sensor address, even if the Module Temperature Sensor byte suggests that
the thermal sensor is not supported.
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240629173716.20389-2-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instantiating a device by calling i2c_new_client_device() assumes that the
device is not already instantiated. If that is not the case, it will return
an error and generate a misleading kernel log message.
i2c i2c-0: Failed to register i2c client jc42 at 0x18 (-16)
This can be reproduced by unloading the ee1004 driver and loading it again.
Avoid this by calling i2c_new_scanned_device() instead, which returns
silently if a device is already instantiated or does not exist.
Fixes: 393bd1000f81 ("eeprom: ee1004: add support for temperature sensor")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240629173716.20389-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the driver does not register a nvmem provider, which means
that userspace programs cannot access the ee1004 EEPROM through the
standard nvmem sysfs API.
Fix this by replacing the custom sysfs attribute with a standard nvmem
interface, which also takes care of backwards compatibility.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240625063459.429953-2-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use devm_add_action_or_reset() to clean up the bus data at
driver removal or when an error occurs during probe.
This will allow us to use other devres-based APIs later.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240625063459.429953-1-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'devmodel' hasn't actually been used since:
'commit 3275158fa52a ("parport: remove use of devmodel")'
and everyone now has it set to true and has been fixed up; remove
the flag.
(There are still comments all over about it)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-4-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The attach function pointers haven't actually been called since:
'commit 3275158fa52a ("parport: remove use of devmodel")'
topped adding entries to the drivers list.
If you're converting a driver, look at the 'match_port' function
pointer instead.
(There are lots of comment references to 'attach' all over, but they
probably need some deeper understanding to check the semantics
to see if they can be replaced by match_port).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-3-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The list has been empty since:
'commit 3275158fa52a ("parport: remove use of devmodel")'
This also means we can remove the 'list_head' from
struct parport_driver.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-2-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'mcb_parse_priv' has been unused since the initial
commit 3764e82e5150 ("drivers: Introduce MEN Chameleon Bus").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20240624090104.12871-2-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240624125101.1242750-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/bsr.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-powerpc-drivers-char-v1-1-bff22fd778a4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With arch=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/goldfish/goldfish_pipe.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-goldfish_pipe-md-v2-1-b4323a969594@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dca/dca.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-dca-md-v2-1-c4062275a3f1@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/greybus/greybus.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/greybus/gb-es2.o
Add all missing invocations of the MODULE_DESCRIPTION() macro.
Acked-by: Alex Elder <elder@kernel.org>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240626-md-drivers-greybus-v2-1-d520ffb9a489@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwtracing/intel_th/intel_th_msu_sink.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240530-md-intel_th_msu_sink-v1-1-ae796336e7b9@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/dsp56k.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240617-md-m68k-drivers-char-dsp56k-v1-1-56e435ffa664@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/dtlk.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240617-md-m68k-drivers-char-dtlk-v1-1-a53a237f1f06@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wait_for_completion_interruptible_timeout()
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_interruptible_timeout() causing patterns like:
timeout = wait_for_completion_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-5-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-4-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wait_event_interruptible_timeout()
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_interruptible_timeout() causing patterns like:
timeout = wait_event_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-3-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_interruptible_timeout() causing patterns like:
timeout = wait_event_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In binder_alloc, there is a frequent need for order3 memory allocation,
especially on small-memory mobile devices, which can lead to OOM and
cause foreground applications to be killed, resulting in flashbacks.
We use kvcalloc to allocate memory, which can reduce system OOM
occurrences, as well as decrease the time and probability of failure for
order3 memory allocations. Additionally, It has little impact on the
throughput of the binder. (as verified by Google's binder_benchmark
testing tool).
We have conducted multiple tests on an 8GB memory phone, kvcalloc has
little performance degradation and resolves frequent OOM issues, Below
is a partial excerpt of the test data.
throughput(TH_PUT) = (size * Iterations)/Time
kcalloc->kvcalloc:
Sample with kcalloc():
adb shell stop/ kcalloc /8+256G
---------------------------------------------------------------------
Benchmark Time CPU Iterations TH-PUT TH-PUTCPU
(ns) (ns) (GB/s) (GB/s)
---------------------------------------------------------------------
BM_sendVec_binder4 39126 18550 38894 3.976282 8.38684
BM_sendVec_binder8 38924 18542 37786 7.766108 16.3028
BM_sendVec_binder16 38328 18228 36700 15.32039 32.2141
BM_sendVec_binder32 38154 18215 38240 32.07213 67.1798
BM_sendVec_binder64 39093 18809 36142 59.16885 122.977
BM_sendVec_binder128 40169 19188 36461 116.1843 243.2253
BM_sendVec_binder256 40695 19559 35951 226.1569 470.5484
BM_sendVec_binder512 41446 20211 34259 423.2159 867.8743
BM_sendVec_binder1024 44040 22939 28904 672.0639 1290.278
BM_sendVec_binder2048 47817 25821 26595 1139.063 2109.393
BM_sendVec_binder4096 54749 30905 22742 1701.423 3014.115
BM_sendVec_binder8192 68316 42017 16684 2000.634 3252.858
BM_sendVec_binder16384 95435 64081 10961 1881.752 2802.469
BM_sendVec_binder32768 148232 107504 6510 1439.093 1984.295
BM_sendVec_binder65536 326499 229874 3178 637.8991 906.0329
NORAML TEST SUM 10355.79 17188.15
stressapptest eat 2G SUM 10088.39 16625.97
Sample with kvcalloc():
adb shell stop/ kvcalloc /8+256G
----------------------------------------------------------------------
Benchmark Time CPU Iterations TH-PUT TH-PUTCPU
(ns) (ns) (GB/s) (GB/s)
----------------------------------------------------------------------
BM_sendVec_binder4 39673 18832 36598 3.689965 7.773577
BM_sendVec_binder8 39869 18969 37188 7.462038 15.68369
BM_sendVec_binder16 39774 18896 36627 14.73405 31.01355
BM_sendVec_binder32 40225 19125 36995 29.43045 61.90013
BM_sendVec_binder64 40549 19529 35148 55.47544 115.1862
BM_sendVec_binder128 41580 19892 35384 108.9262 227.6871
BM_sendVec_binder256 41584 20059 34060 209.6806 434.6857
BM_sendVec_binder512 42829 20899 32493 388.4381 796.0389
BM_sendVec_binder1024 45037 23360 29251 665.0759 1282.236
BM_sendVec_binder2048 47853 25761 27091 1159.433 2153.735
BM_sendVec_binder4096 55574 31745 22405 1651.328 2890.877
BM_sendVec_binder8192 70706 43693 16400 1900.105 3074.836
BM_sendVec_binder16384 96161 64362 10793 1838.921 2747.468
BM_sendVec_binder32768 147875 107292 6296 1395.147 1922.858
BM_sendVec_binder65536 330324 232296 3053 605.7126 861.3209
NORAML TEST SUM 10033.56 16623.35
stressapptest eat 2G SUM 9958.43 16497.55
Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240619113841.3362-1-liulei.rjpt@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When creating new binder references, the driver assigns a descriptor id
that is shared with userspace. Regrettably, the driver needs to keep the
descriptors small enough to accommodate userspace potentially using them
as Vector indexes. Currently, the driver performs a linear search on the
rb-tree of references to find the smallest available descriptor id. This
approach, however, scales poorly as the number of references grows.
This patch introduces the usage of bitmaps to boost the performance of
descriptor assignments. This optimization results in notable performance
gains, particularly in processes with a large number of references. The
following benchmark with 100,000 references showcases the difference in
latency between the dbitmap implementation and the legacy approach:
[ 587.145098] get_ref_desc_olocked: 15us (dbitmap on)
[ 602.788623] get_ref_desc_olocked: 47343us (dbitmap off)
Note the bitmap size is dynamically adjusted in line with the number of
references, ensuring efficient memory usage. In cases where growing the
bitmap is not possible, the driver falls back to the slow legacy method.
A previous attempt to solve this issue was proposed in [1]. However,
such method involved adding new ioctls which isn't great, plus older
userspace code would not have benefited from the optimizations either.
Link: https://lore.kernel.org/all/20240417191418.1341988-1-cmllamas@google.com/ [1]
Cc: Tim Murray <timmurray@google.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: John Stultz <jstultz@google.com>
Cc: Steven Moreland <smoreland@google.com>
Suggested-by: Nick Chen <chenjia3@oppo.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240612042535.1556708-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the definition down and make it a boolean that is initialized
to false.
Fixes: 13d12e3ad12d ("iio: adc: ad7173: Add support for AD411x devices")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202406232046.DKfBJq6o-lkp@intel.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a driver to support reading the Auxiliary ADC IP found in the
MediaTek MT6357, MT6358 and MT6359 Power Management ICs, featuring
a different register layout, configuration reset and ADC reading
sequence from the other already supported MediaTek SoC or PMIC
(aux)ADC HW.
This driver provides multiple ADC channels for system monitoring,
such as battery voltage, PMIC temperature, PMIC-internal voltage
regulators temperature, and others.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20240604123008.327424-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Some users may be requiring only rather small numbers as both
numerator and denominator: add signed and unsigned 8 bits
structs {s8,u8}_fract.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20240604123008.327424-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a new binding for the MT6350 Series (MT6357/8/9) PMIC AUXADC,
providing various ADC channels for both internal temperatures and
voltages, audio accessory detection (hp/mic/hp+mic and buttons,
usually on a 3.5mm jack) other than some basic battery statistics
on boards where the battery is managed by this PMIC.
Also add the necessary dt-binding headers for devicetree consumers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patch.msgid.link/20240604123008.327424-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
TI K3 SoC's support eQEP hardware, so add ARCH_K3 to the depends
so the TI eQEP driver can be built for K3 devices.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20240612135538.2447938-9-jm@ti.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/878qyl970c.wl-kuninori.morimoto.gx@renesas.com
|
|
Add new compatible for ti-am62-eqep for TI K3 SoC's.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20240612135538.2447938-3-jm@ti.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Add new compatible ti,am62-eqep for TI K3 devices. If a device
uses this compatible, require power-domains property.
Since there is only one functional and interface clock for eqep,
clock-names is not really required, so removed from required
section, make it optional for ti,am3352-eqep compatible, and
update the example.
The clock-name also changed for TI K3 SoCs so do not allow
clock-names property for the new compatible.
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: David Lechner <david@lechnology.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240612135538.2447938-2-jm@ti.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
The ti_eqep_count_from_counter() function is just a wrapper around
counter_priv(). counter_priv() can be used directly, so we don't need
the wrapper function. Remove it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240609-ti-eqep-cleanup-v1-2-9d67939c763a@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Since commit 8817c2d03a85 ("counter: ti-eqep: Convert to counter_priv()
wrapper") the counter field in struct ti_eqep_cnt is not used anymore.
Remove it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240609-ti-eqep-cleanup-v1-1-9d67939c763a@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
This adds support to the TI eQEP counter driver for subscribing to
overflow and underflow events using the counter chrdev interface.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240609-counter-ti-eqep-over-under-events-v1-1-74fe1632f5ab@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/counter/ftm-quaddec.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-ftm-quaddec-v1-1-1bbdf705ad31@quicinc.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
|
|
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/remapped_nvme'
CPU: 11 PID: 954 Comm: modprobe Not tainted 6.10.0-rc5 #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_add_file_mode_ns+0x11a/0x130
sysfs_add_file_to_group+0x7e/0xc0
ahci_init_one+0x31f/0xd40 [ahci]
Fixes: 894fba7f434a ("ata: ahci: Add sysfs attribute to show remapped NVMe device count")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-10-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump
to the err_out label, which will call devres_release_group().
devres_release_group() will trigger a call to ata_host_release().
ata_host_release() calls kfree(host), so executing the kfree(host) in
ata_host_alloc() will lead to a double free:
kernel BUG at mm/slub.c:553!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:kfree+0x2cf/0x2f0
Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da
RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246
RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320
RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0
RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000
R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780
R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006
FS: 00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x6a/0x90
? kfree+0x2cf/0x2f0
? exc_invalid_op+0x50/0x70
? kfree+0x2cf/0x2f0
? asm_exc_invalid_op+0x1a/0x20
? ata_host_alloc+0xf5/0x120 [libata]
? ata_host_alloc+0xf5/0x120 [libata]
? kfree+0x2cf/0x2f0
ata_host_alloc+0xf5/0x120 [libata]
ata_host_alloc_pinfo+0x14/0xa0 [libata]
ahci_init_one+0x6c9/0xd20 [ahci]
Ensure that we will not call kfree(host) twice, by performing the kfree()
only if the devres_open_group() call failed.
Fixes: dafd6c496381 ("libata: ensure host is free'd on error exit paths")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-9-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).
Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
If the ata_port_alloc() call in ata_host_alloc() fails,
ata_host_release() will get called.
However, the code in ata_host_release() tries to free ata_port struct
members unconditionally, which can lead to the following:
BUG: unable to handle page fault for address: 0000000000003990
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata]
Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41
RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246
RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0
RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68
R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004
R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006
FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2f0
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? ata_host_release.cold+0x2f/0x6e [libata]
? ata_host_release.cold+0x2f/0x6e [libata]
release_nodes+0x35/0xb0
devres_release_group+0x113/0x140
ata_host_alloc+0xed/0x120 [libata]
ata_host_alloc_pinfo+0x14/0xa0 [libata]
ahci_init_one+0x6c9/0xd20 [ahci]
Do not access ata_port struct members unconditionally.
Fixes: 633273a3ed1c ("libata-pmp: hook PMP support and enable it")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-7-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
The kernel test robot reported that clang no longer compiles the 32-bit
x86 kernel in some configurations due to commit 95ece48165c1
("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}()
functions").
The build fails with
arch/x86/include/asm/cmpxchg_32.h:149:9: error: inline assembly requires more registers than available
and the reason seems to be that not only does the cmpxchg8b instruction
need four fixed registers (EDX:EAX and ECX:EBX), with the emulation
fallback the inline asm also wants a fifth fixed register for the
address (it uses %esi for that, but that's just a software convention
with cmpxchg8b_emu).
Avoiding using another pointer input to the asm (and just forcing it to
use the "0(%esi)" addressing that we end up requiring for the sw
fallback) seems to fix the issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406230912.F6XFIyA6-lkp@intel.com/
Fixes: 95ece48165c1 ("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions")
Link: https://lore.kernel.org/all/202406230912.F6XFIyA6-lkp@intel.com/
Suggested-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-and-Tested-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make use of dev_err_probe() and dev_err_ptr_probe() to simplify error paths
during probe.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240606-dev-add_dev_errp_probe-v3-4-51bb229edd79@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Using dev_err_cast_probe() to simplify the code.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240606-dev-add_dev_errp_probe-v3-3-51bb229edd79@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use dev_err_probe() (and variants) in the probe() path. While at it, made
some simple improvements:
* Explicitly included the err.h and errno.h headers;
* Removed some unnecessary line breaks;
* Removed a redundant 'else';
* Added some missing \n to prink.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240606-dev-add_dev_errp_probe-v3-2-51bb229edd79@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This is similar to dev_err_probe() but for cases where an ERR_PTR() or
ERR_CAST() is to be returned simplifying patterns like:
dev_err_probe(dev, ret, ...);
return ERR_PTR(ret)
or
dev_err_probe(dev, PTR_ERR(ptr), ...);
return ERR_CAST(ptr)
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240606-dev-add_dev_errp_probe-v3-1-51bb229edd79@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Label all the channels using names from the reference manual. Some of
the "control" channels are duplicates of other channels. The reference
manual describes it like:
> The AMS register set includes several measurement registers that are
> written to by the PS SYSMON unit using the single-channel mode
> (sequencer off). These voltage measurements are performed using the
> unipolar sampling circuit with a 0 to 3V range and do not have alarms
> or minimum/maximum registers.
So I think these really are measuring the same voltages but in a
different location. In which case, sharing labels makes sense to me.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240620204842.817237-1-sean.anderson@linux.dev
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
