| Commit message (Collapse) | Author | Files | Lines |
|---|
|
There seems to be some undocumented bandwidth
bottleneck/dependency which scales with CDCLK,
causing FIFO underruns when CDCLK is too low,
even when it's correct from BSpec point of view.
Currently for TGL platforms we calculate
min_cdclk initially based on pixel_rate divided
by 2, accounting for also plane requirements,
however in some cases the lowest possible CDCLK
doesn't work and causing the underruns.
We've found experimentally that raising cdclk to
at least pixel_rate (rather than pixel_rate/2)
eliminates these underruns, so let's use this as a
temporary workaround until the hardware team
can suggest a more precise remedy.
Explicitly stating here that this seems to be currently
rather a Hack, than final solution.
v2: Use clamp operation instead of min(Matt Roper)
v3: - Fixed commit message(Matt Roper)
- Now using pixel_rate instead of max_cdclk(Jani Nikula)
- Switched to max from clamp(Ville Syrjälä)
Hopefully this hybrid satisfies everyone :)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/402
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109220547.23817-1-stanislav.lisovskiy@intel.com
|
|
We use PCI device path in the registered PMU name in order to distinguish
between multiple GPUs. But since tools/perf reserves a special meaning to
dash and colon characters we need to transliterate them to something else.
We choose an underscore.
v2:
* Use strreplace. (Chris)
* Dashes are not good either. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Fixes: 05488673a4d4 ("drm/i915/pmu: Support multiple GPUs")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110113253.12535-1-tvrtko.ursulin@linux.intel.com
|
|
A copy and paste error in setting up the !CONFIG_DRM_I915_CAPTURE_ERROR
stubs left a conflicting duplicate declaration.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200111083007.1619228-1-chris@chris-wilson.co.uk
|
|
uC sanitization is only meaningful if we are running with uC present
or enabled. Make this function part of the uc_ops.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110222723.14724-5-michal.wajdeczko@intel.com
|
|
uC preparation and cleanup steps are only meaningful if we are
running with uC enabled. Make these functions part of the uc_ops.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110222723.14724-4-michal.wajdeczko@intel.com
|
|
Firmware fetching and cleanup steps are only meaningful if we are
running with uC enabled. Make these functions part of the uc_ops.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110222723.14724-3-michal.wajdeczko@intel.com
|
|
Instead of spreading multiple conditionals across the uC code
to find out current mode of uC operation, start using predefined
set of function pointers that reflect that mode.
Begin with pair of init_hw/fini_hw functions that are responsible
for uC hardware initialization and cleanup.
v2: drop ops_none, use macro to generate ops helpers
v3: reuse __uc_check_hw to avoid redundant comment
v4: forward declare ops struct vs functions
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110222723.14724-2-michal.wajdeczko@intel.com
|
|
We need to hold the runtime-pm wakeref to update the global PTEs (as
they exist behind a PCI BAR). However, some systems invoke ACPI during
runtime resume and so require allocations, which is verboten inside the
vm->mutex. Ergo, we must not use intel_runtime_pm_get() inside the
mutex, but lift the call outside.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/958
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110144418.1415639-1-chris@chris-wilson.co.uk
|
|
Parsing the i2c element is mainly done to transfer the payload from the
MIPI sequence block to the relevant slave device. In some cases, the
commands that are part of the payload can be used to turn on the backlight.
This patch is actually a refactored version of this old patch:
https://lists.freedesktop.org/archives/intel-gfx/2014-December/056897.html
In addition to the refactoring, the original patch is augmented by
looking up the i2c bus from ACPI NS instead of relying on the bus number
provided in the VBT.
This patch was tested on Aava Mobile's Inari 10 tablet. It enabled
turning on the backlight by transferring the payload to the device.
v2:
- Add DRM_DEV_ERROR for invalid adapter and failed transfer and also
drop the DRM_DEBUG that existed originally. (Hans)
- Add two gotos instead of one to clean things up properly.
v3:
- Identify the device on which this patch was tested in the commit
message (Ville)
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110181123.14536-1-vivek.kasireddy@intel.com
|
|
The list of requests from after the hang tells little about the hang
itself, only how busy userspace was after the fact. As it pertains
nothing to the HW state, drop it from the error state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110123059.1348712-4-chris@chris-wilson.co.uk
|
|
The shadow ring regs (ring->head, ring->tail) are meaningless in the
post-mortem dump as they do not related to anything on HW. Remove them
from the coredump.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110123059.1348712-3-chris@chris-wilson.co.uk
|
|
While this is technically the batch as executed by the HW (in part at
least), it is confusing, and only used for a minority of gen.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110123059.1348712-2-chris@chris-wilson.co.uk
|
|
In the near future, we will want to start a GPU error capture from a new
context, from inside the softirq region of a forced preemption. To do
so requires us to break up the monolithic error capture to provide new
entry points with finer control; in particular focusing on one
engine/gt, and being able to compose an error state from little pieces
of HW capture.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110123059.1348712-1-chris@chris-wilson.co.uk
|
|
As we use the active state to keep the vma alive while we are reading
its contents during GPU error capture, we need to mark the
ring->vma as active during execution if we want to include the rinbuffer
in the error state.
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110110402.1231745-3-chris@chris-wilson.co.uk
|
|
As we use the active state to keep the vma alive while we are reading
its contents during GPU error capture, we need to mark the
context->state vma as active during execution if we want to include it
in the error state.
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110110402.1231745-2-chris@chris-wilson.co.uk
|
|
Currently we first to try to unbind the VMA (and lazily rebind on next
use) as an optimisation during restore_ggtt_mappings. Ideally, the only
objects in the GGTT upon resume are the pinned kernel objects which
can't be unbound and need to be restored. As the unbind interferes with
the plan to mark those objects as active for error capture, forgo the
optimisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110110402.1231745-1-chris@chris-wilson.co.uk
|
|
Convert to the use of new struct drm_device based logging macros to
replace the use of the printk based macros in i915/intel_uncore.c
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7142083e727ab400797c8a90a2196ee37a22c201.1578409433.git.wambui.karugax@gmail.com
|
|
Replace the use of printk based debugging macros with the struct
drm_device based logging macros in i915/intel_sideband.c.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ae253ecf3ca878fae7f1f246d75c2136fb6bd72c.1578409433.git.wambui.karugax@gmail.com
|
|
Replace instances of printk based logging macros with the new
struct drm_device logging macros in i915/intel_region_lmem.c.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7f3df2575ab41a052b7beea86ecc5385edf6f6da.1578409433.git.wambui.karugax@gmail.com
|
|
This converts various instances of the struct device and printk based
logging macros with the new struct drm_device based logging macros in
i915/intel_pm.c
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8721848f7bcf8b0c3a33969d07e331bb372bd51a.1578409433.git.wambui.karugax@gmail.com
|
|
Convert the use of the DRM_DEBUG_KMS() logging macro to the new struct
drm_device based drm_dbg_kms() logging macro in i915/intel_pch.c.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b79ee0f6efbf8358cbb4f2e163fa6b5bb04db794.1578409433.git.wambui.karugax@gmail.com
|
|
Fix build error:
drivers/gpu/drm/i915/gt/intel_ggtt.c: In function ggtt_restore_mappings:
drivers/gpu/drm/i915/gt/intel_ggtt.c:1239:3: error:
implicit declaration of function wbinvd_on_all_cpus; did you mean wrmsr_on_cpus? [-Werror=implicit-function-declaration]
wbinvd_on_all_cpus();
^~~~~~~~~~~~~~~~~~
wrmsr_on_cpus
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109012303.153001-1-chenzhou10@huawei.com
|
|
I missed a few assert_pipe_disabled() cases when changing it to
take enum transcoder instead of enum pipe, making sparse unhappy.
Convert the leftovers.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108145616.7349-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
When moving the pipe disable & co. function calls from
haswell_crtc_disable() into the encoder .post_disable() hooks I
neglected to account for the MST vs. DDI interactions properly.
This now leads us to call these functions two times for the last
MST stream (once from the MST code and a second time from the DDI
code). The calls from the DDI code should only be done for SST
and not MST. Add the proper check for that.
This results in an MCE on ICL. My vague theory is that we turn off
the transcoder clock from the MST code and then we proceed to touch
something in the DDI code which still depends on that clock causing
the hardware to become upset. Though I can't really explain why
Stan's hack of omitting the pipe disable in the MST code would avoid
the MCE since we should still be turning off the transcoder clock.
But maybe there's something magic in the hw that keeps the clock on
as long as the pipe is on. Or maybe the clock isn't the problem and
we now touch something in the DDI disable code that really does need
the pipe to be still enabled.
v2: Rebase to latest drm-tip
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reported-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/901
Fixes: 773b4b54351c ("drm/i915: Move stuff from haswell_crtc_disable() into encoder .post_disable()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108144550.29280-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Fixes coccicheck warning:
drivers/gpu/drm/i915/display/intel_crt.c:1066:1-28: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/display/intel_crt.c:928:2-29: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/display/intel_crt.c:443:2-29: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ma Feng <mafeng.ma@huawei.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1578013959-31486-4-git-send-email-mafeng.ma@huawei.com
|
|
Fixes coccicheck warning:
drivers/gpu/drm/i915/display/intel_dp.c:4950:1-33: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/display/intel_dp.c:4906:1-33: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ma Feng <mafeng.ma@huawei.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1578013959-31486-3-git-send-email-mafeng.ma@huawei.com
|
|
Fixes coccicheck warning:
drivers/gpu/drm/i915/i915_debugfs.c:3078:4-36: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/i915_debugfs.c:3078:4-36: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/i915_debugfs.c:3080:4-36: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/i915_debugfs.c:3080:4-36: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ma Feng <mafeng.ma@huawei.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1578013959-31486-2-git-send-email-mafeng.ma@huawei.com
|
|
Now that we have moved the runtime-pm management out of
intel_context_acctive_acquire, and that itself out of ce->ops->pin(), no
explicit runtime pm wakeref is required in intel_context_pin().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109085717.873326-3-chris@chris-wilson.co.uk
|
|
While this is encroaching on midlayer territory, having already made the
state allocation a previous step in pinning, we can now pull the common
intel_context_active_acquire() into intel_context_pin() itself. This is
a prelude to make the activation a separate step inside pinning, outside
of the ce->pin_mutex
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109085717.873326-2-chris@chris-wilson.co.uk
|
|
Allow for knowledgeable users to preallocate the context state, and to
separate the allocation step from the pinning step during
intel_context_pin()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109085717.873326-1-chris@chris-wilson.co.uk
|
|
Since we now allow the intel_context_unpin() to run unserialised, we
risk our operations under the intel_context_lock_pinned() being run as
the context is unpinned (and thus invalidating our state). We can
atomically acquire the pin, testing to see if it is pinned in the
process, thus ensuring that the state remains consistent during the
course of the whole operation.
Fixes: 841350223816 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109085142.871563-1-chris@chris-wilson.co.uk
|
|
This reverts commit 08fff7aeddc9dd72161b4c8fc27fbab12b4b9352.
For some yet unexplained reason not having this improves stability of some
media workloads.
Promise is that the media hang will be root caused properly and in the
meantime absence of this workaround is unlikely to cause problems.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Francesco Balestrieri <francesco.balestrieri@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108161954.29739-1-tvrtko.ursulin@linux.intel.com
|
|
Access through the GGTT (iomap) into the vma does require the device to
be awake. However, we often take the i915_vma_pin_iomap() as an early
preparatory step that is long before we use the iomap. Asserting that
the device is awake at pin time does not protect us, and is merely a
nuisance.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108153550.3803446-2-chris@chris-wilson.co.uk
|
|
If we have no fence and desire no fence on the vma, return before we try
and take the vm->mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108153550.3803446-1-chris@chris-wilson.co.uk
|
|
intel_timeline_enter() has been decoupled from intel_timeline_pin() and
both enter/exit & pin/unpin are allowed [read expected] to run
concurrently with one another. The assertion that they had better not is
stale.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/940
References: a6edbca74b30 ("drm/i915/gt: Close race between engine_park and intel_gt_retire_requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107143826.3298401-1-chris@chris-wilson.co.uk
|
|
The new helper drm_of_lvds_get_dual_link_pixel_order() introduced in
commit 6529007522de has a fallback stub when CONFIG_OF is not set, but
the stub is declared in drm_of.h without a static inline. This causes
multiple definitions of the function to be linked when the CONFIG_OF
option isn't set. Fix it by making the stub static inline.
Fixes: 6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219103703.8547-1-laurent.pinchart+renesas@ideasonboard.com
|
|
Capturing the restrictions of the BSpec pages bellow:
SKL and CNL do not support MST in DDI E, DDI E only support 2 lanes
and it is mostly used to support a 4 lanes eDP panel together with
DDI A.
ICL's DDI E support MST just like other ports but DDI A is still eDP
and MIPI only.
TGL supports MST in any DDI, including DDI A but TGL has it's own
ddi_pre_enable_dp function already without any warning.
[ 215.579791] ------------[ cut here ]------------
[ 215.579794] WARN_ON(is_mst && (port == PORT_A || port == PORT_E))
[ 215.579875] WARNING: CPU: 0 PID: 268 at drivers/gpu/drm/i915/display/intel_ddi.c:3576 intel_ddi_pre_enable+0x124/0xea0 [i915]
[ 215.579878] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 btusb btrtl btbcm btintel bluetooth prime_numbers snd_hda_intel snd_intel_dspcfg snd_hda_codec e1000e snd_hwdep snd_hda_core asix mei_hdcp cdc_ether x86_pkg_temp_thermal mei_me snd_pcm r8152 coretemp usbnet mei crct10dif_pclmul mii ptp ecdh_generic crc32_pclmul i2c_i801 ecc pps_core ghash_clmulni_intel thunderbolt
[ 215.579905] CPU: 0 PID: 268 Comm: kworker/0:2 Tainted: G W 5.4.0-rc8-zeh+ #1307
[ 215.579907] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3201.A00.1905140358 05/14/2019
[ 215.579912] Workqueue: events_long drm_dp_mst_link_probe_work
[ 215.579975] RIP: 0010:intel_ddi_pre_enable+0x124/0xea0 [i915]
[ 215.579978] Code: ff 8b 7c 24 10 89 44 24 30 85 ff 74 1f f7 44 24 18 fb ff ff ff 75 15 48 c7 c6 98 fa 48 a0 48 c7 c7 d3 df 4a a0 e8 cf d5 d0 e0 <0f> 0b 0f b6 4c 24 2c 41 8b b5 04 06 00 00 4c 89 e7 41 0f b6 95 0c
[ 215.579980] RSP: 0018:ffffc90001a5f990 EFLAGS: 00010286
[ 215.579984] RAX: 0000000000000000 RBX: ffff88848356a000 RCX: 0000000000000000
[ 215.579986] RDX: 0000000000001df1 RSI: ffff88849340c998 RDI: ffffffff821489c5
[ 215.579989] RBP: ffff88848356a000 R08: 00000000c021a419 R09: 0000000000000000
[ 215.579991] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848356a118
[ 215.579994] R13: ffff88847f39c000 R14: ffff88847fe70000 R15: ffff88848356a000
[ 215.579996] FS: 0000000000000000(0000) GS:ffff88849f800000(0000) knlGS:0000000000000000
[ 215.579999] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 215.580001] CR2: 000055d3d5a26bc0 CR3: 0000000480ba6005 CR4: 0000000000760ef0
[ 215.580004] PKRU: 55555554
[ 215.580006] Call Trace:
[ 215.580014] ? drm_dp_mst_topology_put_port+0x6f/0x130
[ 215.580072] intel_mst_pre_enable_dp+0x14b/0x170 [i915]
[ 215.580129] intel_encoders_pre_enable+0x76/0x90 [i915]
[ 215.580191] haswell_crtc_enable+0x84/0x880 [i915]
[ 215.580266] intel_update_crtc+0x1e4/0x200 [i915]
[ 215.580333] skl_commit_modeset_enables+0x287/0x420 [i915]
[ 215.580405] intel_atomic_commit_tail+0x332/0x14e0 [i915]
[ 215.580410] ? queue_work_on+0x41/0x70
[ 215.580489] intel_atomic_commit+0x31e/0x350 [i915]
[ 215.580500] drm_client_modeset_commit_atomic+0x18b/0x220
[ 215.580523] drm_client_modeset_commit_force+0x4d/0x180
[ 215.580531] drm_fb_helper_restore_fbdev_mode_unlocked+0x46/0xa0
[ 215.580538] drm_fb_helper_set_par+0x27/0x50
[ 215.580543] drm_fb_helper_hotplug_event.part.0+0xa7/0xc0
[ 215.580549] drm_kms_helper_hotplug_event+0x21/0x30
[ 215.580553] process_one_work+0x25b/0x5b0
[ 215.580566] worker_thread+0x4b/0x3b0
[ 215.580578] kthread+0x100/0x140
[ 215.580581] ? process_one_work+0x5b0/0x5b0
[ 215.580585] ? kthread_park+0x80/0x80
[ 215.580591] ret_from_fork+0x24/0x50
[ 215.580603] irq event stamp: 1393930
[ 215.580606] hardirqs last enabled at (1393929): [<ffffffff8112a013>] vprintk_emit+0x143/0x330
[ 215.580609] hardirqs last disabled at (1393930): [<ffffffff81001cfa>] trace_hardirqs_off_thunk+0x1a/0x20
[ 215.580613] softirqs last enabled at (1393434): [<ffffffff81c00389>] __do_softirq+0x389/0x47f
[ 215.580618] softirqs last disabled at (1393423): [<ffffffff810b7199>] irq_exit+0xa9/0xc0
[ 215.580621] ---[ end trace afd44ea9caa6373e ]---
BSpec: 4217
BSpec: 14004
BSpec: 20584
BSpec: 50583
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107170922.153612-2-jose.souza@intel.com
|
|
Talked with HW team and this is a left over, driver should not
program clockgating, mg or dekel firmware is reponsible for any
clockgating programing.
Also removing the register and bits definition related to clockgating.
v2:
Added WARN_ON
v3:
Only calling icl_phy_set_clock_gating() on intel_ddi_pre_enable_hdmi
for GEN11
v4:
ICL should also not program clockgating (thanks Matt for catching
this)
BSpec issue: 20885
BSpec: 49292
BSpec: 21735
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107170922.153612-1-jose.souza@intel.com
|
|
Recent improvements in the state tracking in i915 caused PSR to not be
enabled when reusing firmware/BIOS modeset, this is due to all initial
commits returning ealier in intel_atomic_check() as needs_modeset()
is always false.
To fix that here forcing the state compute phase in CRTC that is
driving the eDP that supports PSR once. Enable or disable PSR do not
require a fullmodeset, so user will still experience glitch free boot
process plus the power savings that PSR brings.
It was tried to set mode_changed in intel_initial_commit() but at
this point the connectors are not registered causing a crash when
computing encoder state.
v2:
- removed function return
- change arguments to match intel_hdcp_atomic_check
v3:
- replaced drm includes in intel_psr.h by forward declaration(Jani)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112253
Reported-by: <s.zharkoff@gmail.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106152128.195171-1-jose.souza@intel.com
|
|
It is highly unlikely, but still conceivable, that we submit a context
with the same GGTT address as last active on the HW. In this case, with
a matching LRCA, the HW would not restore the new context image causing
a potential violation of our context isolation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107172842.3315449-1-chris@chris-wilson.co.uk
|
|
Attempt to split i915_gem_gtt.[ch] into more manageable chunks.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107134009.3255354-1-chris@chris-wilson.co.uk
|
|
In order to avoid a double cleanup on error, take ownership of
engine->release past the point of no [error] return.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: e26b6d434147 ("drm/i915/gt: Pull GT initialisation under intel_gt_init()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107143118.3288995-1-chris@chris-wilson.co.uk
|
|
This loop was added directly to intel_atomic_check() to be used by
all other features that have external pipe dependencies, so using it
and removing intel_atomic_check_synced_crtcs().
After this changes is_trans_port_sync_master() it not used anywhere,
so removing it.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106142823.145260-1-jose.souza@intel.com
|
|
There is a cut and paste bug so we return the wrong error code.
Fixes: a603f5bd1691 ("drm/i915/dp: Make sure all tiled connectors get added to the state with full modeset")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107130322.gdk5b6jurifr26c2@kili.mountain
|
|
Fix build error:
./drivers/gpu/drm/i915/selftests/i915_random.h: In function i915_prandom_u32_max_state:
./drivers/gpu/drm/i915/selftests/i915_random.h:48:23: error:
implicit declaration of function mul_u32_u32; did you mean mul_u64_u32_div? [-Werror=implicit-function-declaration]
return upper_32_bits(mul_u32_u32(prandom_u32_state(state), ep_ro));
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 7ce5b6850b47 ("drm/i915/selftests: Use mul_u32_u32() for 32b x 32b -> 64b result")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107135014.36472-1-yuehaibing@huawei.com
|
|
engine
Detect the modifier corresponding to media compression to enable
display decompression for YUV and xRGB packed formats. A new modifier is
added so that the driver can distinguish between media and render
compressed buffers. Unlike render decompression, plane 6 and plane 7 do not
support media decompression.
v2: Fix checkpatch warnings on code style (Lucas)
From DK:
Separate modifier array for planes that cannot decompress media (Ville)
v3: Support planar formats
v4: Switch plane order
v5:
- Use format block descriptors to get CCS subsampling calculation right
everywhere.
- Extend the plane state normal view array to accommodate 4 color planes.
- Use helpers to convert between main and CCS planes.
v6: Add missing packed YUV formats to the MC format list. (Yang)
v7: Align UV planes to tile-row size.
Cc: Nanley G Chery <nanley.g.chery@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-8-imre.deak@intel.com
|
|
addfb() uAPI has supported four planes for a while now, make format_info
compatible with that.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-7-imre.deak@intel.com
|
|
Gen-12 display can decompress surfaces compressed by the media engine, add
a new modifier as the driver needs to know the surface was compressed by
the media or render engine.
v2: Update code comment describing the color plane order for YUV
semiplanar formats.
Cc: Nanley G Chery <nanley.g.chery@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-6-imre.deak@intel.com
|
|
As intel_fb_plane_get_subsampling() returns the subsampling factor wrt.
its main plane, for a CCS plane we need to apply both the main and the
CCS plane's subsampling factor on the FB's dimensions to get the CCS
plane's dimensions.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-5-imre.deak@intel.com
|
|
Print a debug message if the FB plane[0] offset is not 0 as expected, to
help understainding an add FB IOCTL fail.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-4-imre.deak@intel.com
|
