summaryrefslogtreecommitdiffstats
path: root/security/keys (follow)
Commit message (Collapse)AuthorAgeFilesLines
* headers: untangle kmemleak.h from mm.hRandy Dunlap2018-04-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* KEYS: Use individual pages in big_key for crypto buffersDavid Howells2018-02-221-23/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kmalloc() can't always allocate large enough buffers for big_key to use for crypto (1MB + some metadata) so we cannot use that to allocate the buffer. Further, vmalloc'd pages can't be passed to sg_init_one() and the aead crypto accessors cannot be called progressively and must be passed all the data in one go (which means we can't pass the data in one block at a time). Fix this by allocating the buffer pages individually and passing them through a multientry scatterlist to the crypto layer. This has the bonus advantage that we don't have to allocate a contiguous series of pages. We then vmap() the page list and pass that through to the VFS read/write routines. This can trigger a warning: WARNING: CPU: 0 PID: 60912 at mm/page_alloc.c:3883 __alloc_pages_nodemask+0xb7c/0x15f8 ([<00000000002acbb6>] __alloc_pages_nodemask+0x1ee/0x15f8) [<00000000002dd356>] kmalloc_order+0x46/0x90 [<00000000002dd3e0>] kmalloc_order_trace+0x40/0x1f8 [<0000000000326a10>] __kmalloc+0x430/0x4c0 [<00000000004343e4>] big_key_preparse+0x7c/0x210 [<000000000042c040>] key_create_or_update+0x128/0x420 [<000000000042e52c>] SyS_add_key+0x124/0x220 [<00000000007bba2c>] system_call+0xc4/0x2b0 from the keyctl/padd/useradd test of the keyutils testsuite on s390x. Note that it might be better to shovel data through in page-sized lumps instead as there's no particular need to use a monolithic buffer unless the kernel itself wants to access the data. Fixes: 13100a72f40f ("Security: Keys: Big keys stored encrypted") Reported-by: Paul Bunyan <pbunyan@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Kirill Marinushkin <k.marinushkin@gmail.com>
* Merge branch 'next-tpm' of ↵Linus Torvalds2018-01-311-18/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull tpm updates from James Morris: - reduce polling delays in tpm_tis - support retrieving TPM 2.0 Event Log through EFI before ExitBootServices - replace tpm-rng.c with a hwrng device managed by the driver for each TPM device - TPM resource manager synthesizes TPM_RC_COMMAND_CODE response instead of returning -EINVAL for unknown TPM commands. This makes user space more sound. - CLKRUN fixes: * Keep #CLKRUN disable through the entier TPM command/response flow * Check whether #CLKRUN is enabled before disabling and enabling it again because enabling it breaks PS/2 devices on a system where it is disabled * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: remove unused variables tpm: remove unused data fields from I2C and OF device ID tables tpm: only attempt to disable the LPC CLKRUN if is already enabled tpm: follow coding style for variable declaration in tpm_tis_core_init() tpm: delete the TPM_TIS_CLK_ENABLE flag tpm: Update MAINTAINERS for Jason Gunthorpe tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd() tpm_tis: Move ilb_base_addr to tpm_tis_data tpm2-cmd: allow more attempts for selftest execution tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented tpm: Move Linux RNG connection to hwrng tpm: use struct tpm_chip for tpm_chip_find_get() tpm: parse TPM event logs based on EFI table efi: call get_event_log before ExitBootServices tpm: add event log format version tpm: rename event log provider files tpm: move tpm_eventlog.h outside of drivers folder tpm: use tpm_msleep() value as max delay tpm: reduce tpm polling delay in tpm_tis_core tpm: move wait_for_tpm_stat() to respective driver files
| * tpm: use struct tpm_chip for tpm_chip_find_get()Jarkko Sakkinen2018-01-081-18/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device number (the character device index) is not a stable identifier for a TPM chip. That is the reason why every call site passes TPM_ANY_NUM to tpm_chip_find_get(). This commit changes the API in a way that instead a struct tpm_chip instance is given and NULL means the default chip. In addition, this commit refines the documentation to be up to date with the implementation. Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> (@chip_num -> @chip part) Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca> Tested-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
* | Merge branch 'for-mingo' of ↵Ingo Molnar2018-01-031-7/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Miscellaneous fixes. - Torture-test updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * keyring: Remove now-redundant smp_read_barrier_depends()Paul E. McKenney2017-12-041-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that the associative-array library properly heads dependency chains, the various smp_read_barrier_depends() calls in security/keys/keyring.c are no longer needed. This commit therefore removes them. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: <keyrings@vger.kernel.org> Cc: <linux-security-module@vger.kernel.org> Reviewed-by: James Morris <james.l.morris@oracle.com>
* | KEYS: reject NULL restriction string when type is specifiedEric Biggers2017-12-081-14/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | keyctl_restrict_keyring() allows through a NULL restriction when the "type" is non-NULL, which causes a NULL pointer dereference in asymmetric_lookup_restriction() when it calls strcmp() on the restriction string. But no key types actually use a "NULL restriction" to mean anything, so update keyctl_restrict_keyring() to reject it with EINVAL. Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 97d3aa0f3134 ("KEYS: Add a lookup_restriction function for the asymmetric key type") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* | security: keys: remove redundant assignment to key_refColin Ian King2017-12-081-1/+0
| | | | | | | | | | | | | | | | | | | | Variable key_ref is being assigned a value that is never read; key_ref is being re-assigned a few statements later. Hence this assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com>
* | KEYS: add missing permission check for request_key() destinationEric Biggers2017-12-081-9/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the request_key() syscall is not passed a destination keyring, it links the requested key (if constructed) into the "default" request-key keyring. This should require Write permission to the keyring. However, there is actually no permission check. This can be abused to add keys to any keyring to which only Search permission is granted. This is because Search permission allows joining the keyring. keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING) then will set the default request-key keyring to the session keyring. Then, request_key() can be used to add keys to the keyring. Both negatively and positively instantiated keys can be added using this method. Adding negative keys is trivial. Adding a positive key is a bit trickier. It requires that either /sbin/request-key positively instantiates the key, or that another thread adds the key to the process keyring at just the right time, such that request_key() misses it initially but then finds it in construct_alloc_key(). Fix this bug by checking for Write permission to the keyring in construct_get_dest_keyring() when the default keyring is being used. We don't do the permission check for non-default keyrings because that was already done by the earlier call to lookup_user_key(). Also, request_key_and_link() is currently passed a 'struct key *' rather than a key_ref_t, so the "possessed" bit is unavailable. We also don't do the permission check for the "requestor keyring", to continue to support the use case described by commit 8bbf4976b59f ("KEYS: Alter use of key instantiation link-to-keyring argument") where /sbin/request-key recursively calls request_key() to add keys to the original requestor's destination keyring. (I don't know of any users who actually do that, though...) Fixes: 3e30148c3d52 ("[PATCH] Keys: Make request-key create an authorisation key") Cc: <stable@vger.kernel.org> # v2.6.13+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* | KEYS: remove unnecessary get/put of explicit dest_keyringEric Biggers2017-12-081-2/+0
|/ | | | | | | | | | | | | | In request_key_and_link(), in the case where the dest_keyring was explicitly specified, there is no need to get another reference to dest_keyring before calling key_link(), then drop it afterwards. This is because by definition, we already have a reference to dest_keyring. This change is useful because we'll be making construct_get_dest_keyring() able to return an error code, and we don't want to have to handle that error here for no reason. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2017-11-251-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ...
| * treewide: Switch DEFINE_TIMER callbacks to struct timer_list *Kees Cook2017-11-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes all DEFINE_TIMER() callbacks to use a struct timer_list pointer instead of unsigned long. Since the data argument has already been removed, none of these callbacks are using their argument currently, so this renames the argument to "unused". Done using the following semantic patch: @match_define_timer@ declarer name DEFINE_TIMER; identifier _timer, _callback; @@ DEFINE_TIMER(_timer, _callback); @change_callback depends on match_define_timer@ identifier match_define_timer._callback; type _origtype; identifier _origarg; @@ void -_callback(_origtype _origarg) +_callback(struct timer_list *unused) { ... } Signed-off-by: Kees Cook <keescook@chromium.org>
* | security: keys: Replace time_t with time64_t for struct key_preparsed_payloadBaolin Wang2017-11-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'struct key_preparsed_payload' will use 'time_t' which we will try to remove in the kernel, since 'time_t' is not year 2038 safe on 32bits systems. Thus this patch replaces 'time_t' with 'time64_t' which is year 2038 safe on 32 bits system for 'struct key_preparsed_payload', moreover we should use the 'TIME64_MAX' macro to initialize the 'time64_t' type variable. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com>
* | security: keys: Replace time_t/timespec with time64_tBaolin Wang2017-11-157-52/+43
|/ | | | | | | | | | | | | | | | | | | | | | | | | | The 'struct key' will use 'time_t' which we try to remove in the kernel, since 'time_t' is not year 2038 safe on 32bit systems. Also the 'struct keyring_search_context' will use 'timespec' type to record current time, which is also not year 2038 safe on 32bit systems. Thus this patch replaces 'time_t' with 'time64_t' which is year 2038 safe for 'struct key', and replace 'timespec' with 'time64_t' for the 'struct keyring_search_context', since we only look at the the seconds part of 'timespec' variable. Moreover we also change the codes where using the 'time_t' and 'timespec', and we can get current time by ktime_get_real_seconds() instead of current_kernel_time(), and use 'TIME64_MAX' macro to initialize the 'time64_t' type variable. Especially in proc.c file, we have replaced 'unsigned long' and 'timespec' type with 'u64' and 'time64_t' type to save the timeout value, which means user will get one 'u64' type timeout value by issuing proc_keys_show() function. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com>
* Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2017-11-141-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
| * timer: Remove expires and data arguments from DEFINE_TIMERKees Cook2017-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop the arguments from the macro and adjust all callers with the following script: perl -pi -e 's/DEFINE_TIMER\((.*), 0, 0\);/DEFINE_TIMER($1);/g;' \ $(git grep DEFINE_TIMER | cut -d: -f1 | sort -u | grep -v timer.h) Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # for m68k parts Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog parts Acked-by: David S. Miller <davem@davemloft.net> # for networking parts Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> # for wireless parts Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Reed <mdr@sgi.com> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: netdev@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-11-git-send-email-keescook@chromium.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds2017-11-024-0/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
| * | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-024-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | KEYS: trusted: fix writing past end of buffer in trusted_read()Eric Biggers2017-11-021-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When calling keyctl_read() on a key of type "trusted", if the user-supplied buffer was too small, the kernel ignored the buffer length and just wrote past the end of the buffer, potentially corrupting userspace memory. Fix it by instead returning the size required, as per the documentation for keyctl_read(). We also don't even fill the buffer at all in this case, as this is slightly easier to implement than doing a short read, and either behavior appears to be permitted. It also makes it match the behavior of the "encrypted" key type. Fixes: d00a1c72f7f4 ("keys: add new trusted key-type") Reported-by: Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v2.6.38+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
* | | KEYS: return full count in keyring_read() if buffer is too smallEric Biggers2017-11-021-20/+19
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e645016abc80 ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") made keyring_read() stop corrupting userspace memory when the user-supplied buffer is too small. However it also made the return value in that case be the short buffer size rather than the size required, yet keyctl_read() is actually documented to return the size required. Therefore, switch it over to the documented behavior. Note that for now we continue to have it fill the short buffer, since it did that before (pre-v3.13) and dump_key_tree_aux() in keyutils arguably relies on it. Fixes: e645016abc80 ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") Reported-by: Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
* | KEYS: load key flags and expiry time atomically in proc_keys_show()Eric Biggers2017-10-181-10/+14
| | | | | | | | | | | | | | | | | | In proc_keys_show(), the key semaphore is not held, so the key ->flags and ->expiry can be changed concurrently. We therefore should read them atomically just once. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* | KEYS: Load key expiry time atomically in keyring_search_iterator()Eric Biggers2017-10-181-1/+3
| | | | | | | | | | | | | | | | | | Similar to the case for key_validate(), we should load the key ->expiry once atomically in keyring_search_iterator(), since it can be changed concurrently with the flags whenever the key semaphore isn't held. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* | KEYS: load key flags and expiry time atomically in key_validate()Eric Biggers2017-10-181-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | In key_validate(), load the flags and expiry time once atomically, since these can change concurrently if key_validate() is called without the key semaphore held. And we don't want to get inconsistent results if a variable is referenced multiple times. For example, key->expiry was referenced in both 'if (key->expiry)' and in 'if (now.tv_sec >= key->expiry)', making it theoretically possible to see a spurious EKEYEXPIRED while the expiration time was being removed, i.e. set to 0. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* | KEYS: don't let add_key() update an uninstantiated keyDavid Howells2017-10-181-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, when passed a key that already exists, add_key() will call the key's ->update() method if such exists. But this is heavily broken in the case where the key is uninstantiated because it doesn't call __key_instantiate_and_link(). Consequently, it doesn't do most of the things that are supposed to happen when the key is instantiated, such as setting the instantiation state, clearing KEY_FLAG_USER_CONSTRUCT and awakening tasks waiting on it, and incrementing key->user->nikeys. It also never takes key_construction_mutex, which means that ->instantiate() can run concurrently with ->update() on the same key. In the case of the "user" and "logon" key types this causes a memory leak, at best. Maybe even worse, the ->update() methods of the "encrypted" and "trusted" key types actually just dereference a NULL pointer when passed an uninstantiated key. Change key_create_or_update() to wait interruptibly for the key to finish construction before continuing. This patch only affects *uninstantiated* keys. For now we still allow a negatively instantiated key to be updated (thereby positively instantiating it), although that's broken too (the next patch fixes it) and I'm not sure that anyone actually uses that functionality either. Here is a simple reproducer for the bug using the "encrypted" key type (requires CONFIG_ENCRYPTED_KEYS=y), though as noted above the bug pertained to more than just the "encrypted" key type: #include <stdlib.h> #include <unistd.h> #include <keyutils.h> int main(void) { int ringid = keyctl_join_session_keyring(NULL); if (fork()) { for (;;) { const char payload[] = "update user:foo 32"; usleep(rand() % 10000); add_key("encrypted", "desc", payload, sizeof(payload), ringid); keyctl_clear(ringid); } } else { for (;;) request_key("encrypted", "desc", "callout_info", ringid); } } It causes: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: encrypted_update+0xb0/0x170 PGD 7a178067 P4D 7a178067 PUD 77269067 PMD 0 PREEMPT SMP CPU: 0 PID: 340 Comm: reproduce Tainted: G D 4.14.0-rc1-00025-g428490e38b2e #796 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8a467a39a340 task.stack: ffffb15c40770000 RIP: 0010:encrypted_update+0xb0/0x170 RSP: 0018:ffffb15c40773de8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8a467a275b00 RCX: 0000000000000000 RDX: 0000000000000005 RSI: ffff8a467a275b14 RDI: ffffffffb742f303 RBP: ffffb15c40773e20 R08: 0000000000000000 R09: ffff8a467a275b17 R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8a4677057180 R15: ffff8a467a275b0f FS: 00007f5d7fb08700(0000) GS:ffff8a467f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000077262005 CR4: 00000000001606f0 Call Trace: key_create_or_update+0x2bc/0x460 SyS_add_key+0x10c/0x1d0 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f5d7f211259 RSP: 002b:00007ffed03904c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 000000003b2a7955 RCX: 00007f5d7f211259 RDX: 00000000004009e4 RSI: 00000000004009ff RDI: 0000000000400a04 RBP: 0000000068db8bad R08: 000000003b2a7955 R09: 0000000000000004 R10: 000000000000001a R11: 0000000000000246 R12: 0000000000400868 R13: 00007ffed03905d0 R14: 0000000000000000 R15: 0000000000000000 Code: 77 28 e8 64 34 1f 00 45 31 c0 31 c9 48 8d 55 c8 48 89 df 48 8d 75 d0 e8 ff f9 ff ff 85 c0 41 89 c4 0f 88 84 00 00 00 4c 8b 7d c8 <49> 8b 75 18 4c 89 ff e8 24 f8 ff ff 85 c0 41 89 c4 78 6d 49 8b RIP: encrypted_update+0xb0/0x170 RSP: ffffb15c40773de8 CR2: 0000000000000018 Cc: <stable@vger.kernel.org> # v2.6.12+ Reported-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric Biggers <ebiggers@google.com>
* | KEYS: Fix race between updating and finding a negative keyDavid Howells2017-10-1812-39/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection error into one field such that: (1) The instantiation state can be modified/read atomically. (2) The error can be accessed atomically with the state. (3) The error isn't stored unioned with the payload pointers. This deals with the problem that the state is spread over three different objects (two bits and a separate variable) and reading or updating them atomically isn't practical, given that not only can uninstantiated keys change into instantiated or rejected keys, but rejected keys can also turn into instantiated keys - and someone accessing the key might not be using any locking. The main side effect of this problem is that what was held in the payload may change, depending on the state. For instance, you might observe the key to be in the rejected state. You then read the cached error, but if the key semaphore wasn't locked, the key might've become instantiated between the two reads - and you might now have something in hand that isn't actually an error code. The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error code if the key is negatively instantiated. The key_is_instantiated() function is replaced with key_is_positive() to avoid confusion as negative keys are also 'instantiated'. Additionally, barriering is included: (1) Order payload-set before state-set during instantiation. (2) Order state-read before payload-read when using the key. Further separate barriering is necessary if RCU is being used to access the payload content after reading the payload pointers. Fixes: 146aa8b1453b ("KEYS: Merge the type-specific data with the payload data") Cc: stable@vger.kernel.org # v4.4+ Reported-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Eric Biggers <ebiggers@google.com>
* | security/keys: BIG_KEY requires CONFIG_CRYPTOArnd Bergmann2017-10-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent rework introduced a possible randconfig build failure when CONFIG_CRYPTO configured to only allow modules: security/keys/big_key.o: In function `big_key_crypt': big_key.c:(.text+0x29f): undefined reference to `crypto_aead_setkey' security/keys/big_key.o: In function `big_key_init': big_key.c:(.init.text+0x1a): undefined reference to `crypto_alloc_aead' big_key.c:(.init.text+0x45): undefined reference to `crypto_aead_setauthsize' big_key.c:(.init.text+0x77): undefined reference to `crypto_destroy_tfm' crypto/gcm.o: In function `gcm_hash_crypt_remain_continue': gcm.c:(.text+0x167): undefined reference to `crypto_ahash_finup' crypto/gcm.o: In function `crypto_gcm_exit_tfm': gcm.c:(.text+0x847): undefined reference to `crypto_destroy_tfm' When we 'select CRYPTO' like the other users, we always get a configuration that builds. Fixes: 428490e38b2e ("security/keys: rewrite all of big_key crypto") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com>
* | KEYS: encrypted: fix dereference of NULL user_key_payloadEric Biggers2017-10-121-0/+7
|/ | | | | | | | | | | | | | | | | | | | | | | A key of type "encrypted" references a "master key" which is used to encrypt and decrypt the encrypted key's payload. However, when we accessed the master key's payload, we failed to handle the case where the master key has been revoked, which sets the payload pointer to NULL. Note that request_key() *does* skip revoked keys, but there is still a window where the key can be revoked before we acquire its semaphore. Fix it by checking for a NULL payload, treating it like a key which was already revoked at the time it was requested. This was an issue for master keys of type "user" only. Master keys can also be of type "trusted", but those cannot be revoked. Fixes: 7e70cb497850 ("keys: add new key-type encrypted") Reviewed-by: James Morris <james.l.morris@oracle.com> Cc: <stable@vger.kernel.org> [v2.6.38+] Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Safford <safford@us.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* security/keys: rewrite all of big_key cryptoJason A. Donenfeld2017-09-262-71/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This started out as just replacing the use of crypto/rng with get_random_bytes_wait, so that we wouldn't use bad randomness at boot time. But, upon looking further, it appears that there were even deeper underlying cryptographic problems, and that this seems to have been committed with very little crypto review. So, I rewrote the whole thing, trying to keep to the conventions introduced by the previous author, to fix these cryptographic flaws. It makes no sense to seed crypto/rng at boot time and then keep using it like this, when in fact there's already get_random_bytes_wait, which can ensure there's enough entropy and be a much more standard way of generating keys. Since this sensitive material is being stored untrusted, using ECB and no authentication is simply not okay at all. I find it surprising and a bit horrifying that this code even made it past basic crypto review, which perhaps points to some larger issues. This patch moves from using AES-ECB to using AES-GCM. Since keys are uniquely generated each time, we can set the nonce to zero. There was also a race condition in which the same key would be reused at the same time in different threads. A mutex fixes this issue now. So, to summarize, this commit fixes the following vulnerabilities: * Low entropy key generation, allowing an attacker to potentially guess or predict keys. * Unauthenticated encryption, allowing an attacker to modify the cipher text in particular ways in order to manipulate the plaintext, which is is even more frightening considering the next point. * Use of ECB mode, allowing an attacker to trivially swap blocks or compare identical plaintext blocks. * Key re-use. * Faulty memory zeroing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Kirill Marinushkin <k.marinushkin@gmail.com> Cc: security@kernel.org Cc: stable@vger.kernel.org
* security/keys: properly zero out sensitive key material in big_keyJason A. Donenfeld2017-09-261-6/+6
| | | | | | | | | | | | | Error paths forgot to zero out sensitive material, so this patch changes some kfrees into a kzfrees. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Eric Biggers <ebiggers3@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Kirill Marinushkin <k.marinushkin@gmail.com> Cc: security@kernel.org Cc: stable@vger.kernel.org
* KEYS: use kmemdup() in request_key_auth_new()Eric Biggers2017-09-251-3/+2
| | | | | | | kmemdup() is preferred to kmalloc() followed by memcpy(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* KEYS: restrict /proc/keys by credentials at open timeEric Biggers2017-09-251-6/+2
| | | | | | | | | | | | | | When checking for permission to view keys whilst reading from /proc/keys, we should use the credentials with which the /proc/keys file was opened. This is because, in a classic type of exploit, it can be possible to bypass checks for the *current* credentials by passing the file descriptor to a suid program. Following commit 34dbbcdbf633 ("Make file credentials available to the seqfile interfaces") we can finally fix it. So let's do it. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* KEYS: reset parent each time before searching key_user_treeEric Biggers2017-09-251-2/+2
| | | | | | | | | | | | | | | In key_user_lookup(), if there is no key_user for the given uid, we drop key_user_lock, allocate a new key_user, and search the tree again. But we failed to set 'parent' to NULL at the beginning of the second search. If the tree were to be empty for the second search, the insertion would be done with an invalid 'parent', scribbling over freed memory. Fortunately this can't actually happen currently because the tree always contains at least the root_key_user. But it still should be fixed to make the code more robust. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* KEYS: prevent KEYCTL_READ on negative keyEric Biggers2017-09-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because keyctl_read_key() looks up the key with no permissions requested, it may find a negatively instantiated key. If the key is also possessed, we went ahead and called ->read() on the key. But the key payload will actually contain the ->reject_error rather than the normal payload. Thus, the kernel oopses trying to read the user_key_payload from memory address (int)-ENOKEY = 0x00000000ffffff82. Fortunately the payload data is stored inline, so it shouldn't be possible to abuse this as an arbitrary memory read primitive... Reproducer: keyctl new_session keyctl request2 user desc '' @s keyctl read $(keyctl show | awk '/user: desc/ {print $1}') It causes a crash like the following: BUG: unable to handle kernel paging request at 00000000ffffff92 IP: user_read+0x33/0xa0 PGD 36a54067 P4D 36a54067 PUD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 211 Comm: keyctl Not tainted 4.14.0-rc1 #337 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 task: ffff90aa3b74c3c0 task.stack: ffff9878c0478000 RIP: 0010:user_read+0x33/0xa0 RSP: 0018:ffff9878c047bee8 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff90aa3d7da340 RCX: 0000000000000017 RDX: 0000000000000000 RSI: 00000000ffffff82 RDI: ffff90aa3d7da340 RBP: ffff9878c047bf00 R08: 00000024f95da94f R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f58ece69740(0000) GS:ffff90aa3e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000ffffff92 CR3: 0000000036adc001 CR4: 00000000003606f0 Call Trace: keyctl_read_key+0xac/0xe0 SyS_keyctl+0x99/0x120 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f58ec787bb9 RSP: 002b:00007ffc8d401678 EFLAGS: 00000206 ORIG_RAX: 00000000000000fa RAX: ffffffffffffffda RBX: 00007ffc8d402800 RCX: 00007f58ec787bb9 RDX: 0000000000000000 RSI: 00000000174a63ac RDI: 000000000000000b RBP: 0000000000000004 R08: 00007ffc8d402809 R09: 0000000000000020 R10: 0000000000000000 R11: 0000000000000206 R12: 00007ffc8d402800 R13: 00007ffc8d4016e0 R14: 0000000000000000 R15: 0000000000000000 Code: e5 41 55 49 89 f5 41 54 49 89 d4 53 48 89 fb e8 a4 b4 ad ff 85 c0 74 09 80 3d b9 4c 96 00 00 74 43 48 8b b3 20 01 00 00 4d 85 ed <0f> b7 5e 10 74 29 4d 85 e4 74 24 4c 39 e3 4c 89 e2 4c 89 ef 48 RIP: user_read+0x33/0xa0 RSP: ffff9878c047bee8 CR2: 00000000ffffff92 Fixes: 61ea0c0ba904 ("KEYS: Skip key state checks when checking for possession") Cc: <stable@vger.kernel.org> [v3.13+] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* KEYS: prevent creating a different user's keyringsEric Biggers2017-09-254-12/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was possible for an unprivileged user to create the user and user session keyrings for another user. For example: sudo -u '#3000' sh -c 'keyctl add keyring _uid.4000 "" @u keyctl add keyring _uid_ses.4000 "" @u sleep 15' & sleep 1 sudo -u '#4000' keyctl describe @u sudo -u '#4000' keyctl describe @us This is problematic because these "fake" keyrings won't have the right permissions. In particular, the user who created them first will own them and will have full access to them via the possessor permissions, which can be used to compromise the security of a user's keys: -4: alswrv-----v------------ 3000 0 keyring: _uid.4000 -5: alswrv-----v------------ 3000 0 keyring: _uid_ses.4000 Fix it by marking user and user session keyrings with a flag KEY_FLAG_UID_KEYRING. Then, when searching for a user or user session keyring by name, skip all keyrings that don't have the flag set. Fixes: 69664cf16af4 ("keys: don't generate user and user session keyrings unless they're accessed") Cc: <stable@vger.kernel.org> [v2.6.26+] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* KEYS: fix writing past end of user-supplied buffer in keyring_read()Eric Biggers2017-09-251-9/+5
| | | | | | | | | | | | | Userspace can call keyctl_read() on a keyring to get the list of IDs of keys in the keyring. But if the user-supplied buffer is too small, the kernel would write the full list anyway --- which will corrupt whatever userspace memory happened to be past the end of the buffer. Fix it by only filling the space that is available. Fixes: b2a4df200d57 ("KEYS: Expand the capacity of a keyring") Cc: <stable@vger.kernel.org> [v3.13+] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* KEYS: fix key refcount leak in keyctl_read_key()Eric Biggers2017-09-251-1/+1
| | | | | | | | | | | | | | In keyctl_read_key(), if key_permission() were to return an error code other than EACCES, we would leak a the reference to the key. This can't actually happen currently because key_permission() can only return an error code other than EACCES if security_key_permission() does, only SELinux and Smack implement that hook, and neither can return an error code other than EACCES. But it should still be fixed, as it is a bug waiting to happen. Fixes: 29db91906340 ("[PATCH] Keys: Add LSM hooks for key management [try #3]") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* KEYS: fix key refcount leak in keyctl_assume_authority()Eric Biggers2017-09-251-4/+2
| | | | | | | | | | | | | | | | | In keyctl_assume_authority(), if keyctl_change_reqkey_auth() were to fail, we would leak the reference to the 'authkey'. Currently this can only happen if prepare_creds() fails to allocate memory. But it still should be fixed, as it is a more severe bug waiting to happen. This patch also moves the read of 'authkey->serial' to before the reference to the authkey is dropped. Doing the read after dropping the reference is very fragile because it assumes we still hold another reference to the key. (Which we do, in current->cred->request_key_auth, but there's no reason not to write it in the "obviously correct" way.) Fixes: d84f4f992cbd ("CRED: Inaugurate COW credentials") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* KEYS: don't revoke uninstantiated key in request_key_auth_new()Eric Biggers2017-09-251-1/+0
| | | | | | | | | | | | | | | If key_instantiate_and_link() were to fail (which fortunately isn't possible currently), the call to key_revoke(authkey) would crash with a NULL pointer dereference in request_key_auth_revoke() because the key has not yet been instantiated. Fix this by removing the call to key_revoke(). key_put() is sufficient, as it's not possible for an uninstantiated authkey to have been used for anything yet. Fixes: b5f545c880a2 ("[PATCH] keys: Permit running process to instantiate keys") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* KEYS: fix cred refcount leak in request_key_auth_new()Eric Biggers2017-09-251-37/+31
| | | | | | | | | | | | | | In request_key_auth_new(), if key_alloc() or key_instantiate_and_link() were to fail, we would leak a reference to the 'struct cred'. Currently this can only happen if key_alloc() fails to allocate memory. But it still should be fixed, as it is a more severe bug waiting to happen. Fix it by cleaning things up to use a helper function which frees a 'struct request_key_auth' correctly. Fixes: d84f4f992cbd ("CRED: Inaugurate COW credentials") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
* fs: fix kernel_write prototypeChristoph Hellwig2017-09-051-1/+2
| | | | | | | | Make the position an in/out argument like all the other read/write helpers and and make the buf argument a void pointer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* fs: fix kernel_read prototypeChristoph Hellwig2017-09-051-1/+2
| | | | | | | | | | Use proper ssize_t and size_t types for the return value and count argument, move the offset last and make it an in/out argument like all other read/write helpers, and make the buf argument a void pointer to get rid of lots of casts in the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge tag 'gcc-plugins-v4.13-rc2' of ↵Linus Torvalds2017-07-191-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull structure randomization updates from Kees Cook: "Now that IPC and other changes have landed, enable manual markings for randstruct plugin, including the task_struct. This is the rest of what was staged in -next for the gcc-plugins, and comes in three patches, largest first: - mark "easy" structs with __randomize_layout - mark task_struct with an optional anonymous struct to isolate the __randomize_layout section - mark structs to opt _out_ of automated marking (which will come later) And, FWIW, this continues to pass allmodconfig (normal and patched to enable gcc-plugins) builds of x86_64, i386, arm64, arm, powerpc, and s390 for me" * tag 'gcc-plugins-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randstruct: opt-out externally exposed function pointer structs task_struct: Allow randomized layout randstruct: Mark various structs for randomization
| * randstruct: Mark various structs for randomizationKees Cook2017-06-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This marks many critical kernel structures for randomization. These are structures that have been targeted in the past in security exploits, or contain functions pointers, pointers to function pointer tables, lists, workqueues, ref-counters, credentials, permissions, or are otherwise sensitive. This initial list was extracted from Brad Spengler/PaX Team's code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Left out of this list is task_struct, which requires special handling and will be covered in a subsequent patch. Signed-off-by: Kees Cook <keescook@chromium.org>
* | KEYS: DH: validate __spare fieldEric Biggers2017-07-142-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Syscalls must validate that their reserved arguments are zero and return EINVAL otherwise. Otherwise, it will be impossible to actually use them for anything in the future because existing programs may be passing garbage in. This is standard practice when adding new APIs. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
* | Merge tag 'docs-4.13' of git://git.lwn.net/linuxLinus Torvalds2017-07-045-5/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull documentation updates from Jonathan Corbet: "There has been a fair amount of activity in the docs tree this time around. Highlights include: - Conversion of a bunch of security documentation into RST - The conversion of the remaining DocBook templates by The Amazing Mauro Machine. We can now drop the entire DocBook build chain. - The usual collection of fixes and minor updates" * tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits) scripts/kernel-doc: handle DECLARE_HASHTABLE Documentation: atomic_ops.txt is core-api/atomic_ops.rst Docs: clean up some DocBook loose ends Make the main documentation title less Geocities Docs: Use kernel-figure in vidioc-g-selection.rst Docs: fix table problems in ras.rst Docs: Fix breakage with Sphinx 1.5 and upper Docs: Include the Latex "ifthen" package doc/kokr/howto: Only send regression fixes after -rc1 docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters doc: Document suitability of IBM Verse for kernel development Doc: fix a markup error in coding-style.rst docs: driver-api: i2c: remove some outdated information Documentation: DMA API: fix a typo in a function name Docs: Insert missing space to separate link from text doc/ko_KR/memory-barriers: Update control-dependencies example Documentation, kbuild: fix typo "minimun" -> "minimum" docs: Fix some formatting issues in request-key.rst doc: ReSTify keys-trusted-encrypted.txt doc: ReSTify keys-request-key.txt ...
| * | doc: ReSTify keys-trusted-encrypted.txtKees Cook2017-05-183-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Adjusts for ReST markup and moves under keys security devel index. Cc: David Howells <dhowells@redhat.com> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
| * | doc: ReSTify keys-request-key.txtKees Cook2017-05-182-2/+2
| |/ | | | | | | | | | | | | | | Adjusts for ReST markup and moves under keys security devel index. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* | sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into ↵Ingo Molnar2017-06-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <linux/wait_bit.h> The wait_bit*() types and APIs are mixed into wait.h, but they are a pretty orthogonal extension of wait-queues. Furthermore, only about 50 kernel files use these APIs, while over 1000 use the regular wait-queue functionality. So clean up the main wait.h by moving the wait-bit functionality out of it, into a separate .h and .c file: include/linux/wait_bit.h for types and APIs kernel/sched/wait_bit.c for the implementation Update all header dependencies. This reduces the size of wait.h rather significantly, by about 30%. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | KEYS: fix refcount_inc() on zeroMark Rutland2017-06-091-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a key's refcount is dropped to zero between key_lookup() peeking at the refcount and subsequently attempting to increment it, refcount_inc() will see a zero refcount. Here, refcount_inc() will WARN_ONCE(), and will *not* increment the refcount, which will remain zero. Once key_lookup() drops key_serial_lock, it is possible for the key to be freed behind our back. This patch uses refcount_inc_not_zero() to perform the peek and increment atomically. Fixes: fff292914d3a2f1e ("security, keys: convert key.usage from atomic_t to refcount_t") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: David Windsor <dwindsor@gmail.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Hans Liljestrand <ishkamiel@gmail.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
* | KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP APIMat Martineau2017-06-092-103/+171
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The initial Diffie-Hellman computation made direct use of the MPI library because the crypto module did not support DH at the time. Now that KPP is implemented, KEYCTL_DH_COMPUTE should use it to get rid of duplicate code and leverage possible hardware acceleration. This fixes an issue whereby the input to the KDF computation would include additional uninitialized memory when the result of the Diffie-Hellman computation was shorter than the input prime number. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 12:43:15 +0100