summaryrefslogtreecommitdiffstats
path: root/sound/pci/azt3328.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: azt3328: Remove unnecessary synchronize_irq() before free_irq()Lars-Peter Clausen2015-11-211-2/+0
| | | | | | | | | | Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way) before any state associated with the IRQ is freed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: remove deprecated use of pci apiQuentin Lambert2015-04-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace occurences of the pci api by appropriate call to the dma api. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_ATOMIC ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_ATOMIC ) ) Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: some indenting cleanupsDan Carpenter2015-02-251-3/+4
| | | | | | | A few minor tweaks to make things line up correctly. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Include linux/io.h instead of asm/io.hTakashi Iwai2015-01-281-1/+1
| | | | | | Nowadays it's recommended. Replace all in a shot. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: Simplify PM callbacksTakashi Iwai2015-01-091-15/+0
| | | | | | | | | | | | | | This is a similar cleanup like the commit [3db084fd0af5: ALSA: fm801: PCI core handles power state for us]. Since pci_set_power_state(), pci_save_state() and pci_restore_state() are already done in the PCI core side, so we don't need to it doubly. Also, pci_enable_device(), pci_disable_device() and pci_set_master() calls in PM callbacks are superfluous nowadays, too, so get rid of them as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: Use snd_ctl_enum_info()Takashi Iwai2014-10-211-9/+4
| | | | | | ... and reduce the open codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine2014-08-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* ALSA: azt3328: Use standard printk helpersTakashi Iwai2014-02-261-164/+124
| | | | | | | | Convert with dev_err() and co from snd_printk(), etc. All debug print macros have been replaced with dev_dbg(), too. Also, added the missing definition of snd_azf3328_ctrl_inw(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: Remove function debug printsTakashi Iwai2014-02-261-57/+1
| | | | | | | We have a better infrastructure in general, so let's reduce the home-baked debug macros. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pci: Convert to snd_card_new() with a device pointerTakashi Iwai2014-02-121-3/+2
| | | | | | Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Fix assignment of 0/1 to bool variablesPeter Senna Tschudin2013-09-261-7/+7
| | | | | | | | | | | | | | | | | | | | | | Convert 0 to false and 1 to true when assigning values to bool variables. Inspired by commit 3db1cd5c05f35fb43eb134df6f321de4e63141f2. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @@ bool b; @@ ( -b = 0 +b = false | -b = 1 +b = true ) Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: PCI: Remove superfluous pci_set_drvdata(pci, NULL) at removeTakashi Iwai2013-05-291-1/+0
| | | | | | | | | | | | | As drvdata is cleared to NULL at probe failure or at removal by the driver core, we don't have to call pci_set_drvdata(pci, NULL) any longer in each driver. The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in hda_intel.c. Since this function itself releases the card instance, we need to clear drvdata here as well, so that it won't be released doubly in the remove callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pci: remove __dev* attributesBill Pemberton2012-12-071-11/+11
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEPTakashi Iwai2012-08-141-3/+3
| | | | | | Otherwise we may get compile warnings due to unused functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Convert to new pm_ops for PCI driversTakashi Iwai2012-07-031-10/+15
| | | | | | | | | | Straightforward conversion to the new pm_ops from the legacy suspend/resume ops. Since we change vx222, vx_core and vxpocket have to be converted, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pci: clean up using module_pci_driver()Takashi Iwai2012-04-241-21/+2
| | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3Alban Bedel2012-02-251-2/+1
| | | | | | | opl3->private_data was set even if opl3 could not be created. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: module_param: make bool parameters really boolRusty Russell2011-12-191-1/+1
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: fix drivers needing module.h not moduleparam.hPaul Gortmaker2011-11-011-1/+1
| | | | | | | | | The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* ALSA: mpu401: clean up interrupt specificationClemens Ladisch2011-09-141-2/+3
| | | | | | | | | | | | | | | | | | | | | | | The semantics of snd_mpu401_uart_new()'s interrupt parameters are somewhat counterintuitive: To prevent the function from allocating its own interrupt, either the irq number must be invalid, or the irq_flags parameter must be zero. At the same time, the irq parameter being invalid specifies that the mpu401 code has to work without an interrupt allocated by the caller. This implies that, if there is an interrupt and it is allocated by the caller, the irq parameter must be set to a valid-looking number which then isn't actually used. With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value, which forces us to handle the parameters differently. This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the device interrupt is handled by the caller, and makes the allocation of the interrupt to depend only on the irq parameter. As suggested by Takashi, the irq_flags parameter was dropped because, when used, it had the constant value IRQF_DISABLED. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328 - adjust error handling code to include debugging codeJulia Lawall2011-08-101-4/+7
| | | | | | | | snd_azf3328_dbgcallenter is called at the very beginning of the function, so it could be useful to call snd_azf3328_dbgcallleave at all exit points. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*Takashi Iwai2011-06-101-1/+1
| | | | | | | | | The name argument of request_irq() appears in /proc/interrupts, and it's quite ugly when the name entry contains a space or special letters. In general, it's simpler and more readable when the module name appears there, so let's replace all entries with KBUILD_MODNAME. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Use KBUILD_MODNAME for pci_driver.name entriesTakashi Iwai2011-06-101-1/+1
| | | | | | | | | | | | The convention for pci_driver.name entry in kernel drivers seem to be the module name or equivalent ones. But, so far, almost all PCI sound drivers use more verbose name like "ABC Xyz (12)", and these are fairly confusing when appearing as a file name. This patch converts the all pci_driver.name entries in sound/pci/* to use KBUILD_MODNAME for more unified appearance. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* Merge branch 'fix/misc' into topic/miscTakashi Iwai2011-03-111-22/+16
|\
| * ALSA: azt3328 - fix broken AZF_FMT_XLATE macroAndreas Mohr2011-01-251-22/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cleanly revert to non-macro implementation of snd_azf3328_codec_setfmt(), to fix last-minute functionality breakage induced by following checkpatch.pl recommendations without giving them their due full share of thought ("revolting computer, ensuing PEBKAC"). I would like to thank Jiri Slaby for his very timely (in -rc1 even) and unexpected (uncommon hardware) "recognition of the dangerous situation" due to his very commendable static parser use. :) Reported-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: azt3328: add custom AC97 semi-emulation use standard ALSA AC97 layerAndreas Mohr2011-02-191-48/+402
|/ | | | | | | | | | | | | | | | Make use of the very flexible ALSA ac97 layer (hooks for custom I/O!) on this weird AC97 copycat hardware, via semi-extended I/O translation/emulation. Some 5kB binary/loaded size saved (well... additional huge AC97 module penalty not factored in, of course ;-P). Given that the driver previously had 20kB that's not bad, but the much more important thing is to have AC97 layer stress-tested with a thoroughly weird AC97 copycat (or, simply put, if it were not for this AC97 test aspect, this effort would merely have been a nut job ;). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: improve snd_azf3328_codec_setdmaa()Andreas Mohr2011-01-021-15/+51
| | | | | | | | | | - add some WARN_ONCE - add multi-I/O helper (and use helper struct) - fix off-by-1 DMA length bug - better variable naming Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: use proper private_data hookup for codec identificationAndreas Mohr2011-01-021-144/+90
| | | | | | | | | | | | | - much improved implementation due to clean codec hierarchy - preparation for potential per-codec spinlock change NOTE: additionally removes a chip->pcm[codec_type] NULL ptr check (due to it requiring access to external chip struct), however I believe this to be ok since this condition should not occur and most drivers don't check against that either. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: use a helper variable to remove one indirection in hotpathAndreas Mohr2011-01-021-9/+12
| | | | | Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: cosmetics: use a helper variable for codec setupAndreas Mohr2011-01-021-9/+12
| | | | | Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: _setfmt() updateAndreas Mohr2011-01-021-16/+25
| | | | | | | | - use a separate variable for the frequency part, don't always "or" it - use a "clever"(?) macro to shorten the code Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: cosmetics, minor updatesAndreas Mohr2011-01-021-12/+19
| | | | | | | | | | - correct samples to be POSIX shell compatible - add logging of jiffies value in _pointer() - several comments - cleanup Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: period bug fix (for PA), add missing ACK on stop timerAndreas Mohr2010-11-221-8/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | . Fix PulseAudio "ALSA driver bug" issue (if we have two alternated areas within a 64k DMA buffer, then max period size should obviously be 32k only). Back references: http://pulseaudio.org/wiki/AlsaIssues http://fedoraproject.org/wiki/Features/GlitchFreeAudio . In stop timer function, need to supply ACK in the timer control byte. . Minor log output correction When I did my first PA testing recently, the period size bug resulted in quite precisely observeable half-period-based playback distortion. PA-based operation is quite a bit more underrun-prone (despite its zero-copy optimizations etc.) than raw ALSA with this rather spartan sound hardware implementation on my puny Athlon. Note that even with this patch, azt3328 still doesn't work for both cases yet, PA tsched=0 and tsched (on tsched=0 it will playback tiny fragments of periods, leading to tiny stuttering sounds with some pauses in between, whereas with timer-scheduled operation playback works fine - minus some quite increased underrun trouble on PA vs. ALSA, that is). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: use DEFINE_PCI_DEVICE_TABLEAlexey Dobriyan2010-02-091-1/+1
| | | | | | | | | Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: rename "PC Speaker" and "PC Beep" controls to "Beep"Jaroslav Kysela2009-11-051-2/+2
| | | | | | | | | | | | | To avoid confusion in control names for the standard analog PC Beep generator using a small Internal PC Speaker, rename all related "PC Speaker" and "PC Beep" controls to "Beep" only. This name is more universal and can be also used on more platforms without confusion. Introduce also "Internal Speaker" in ControlNames.txt for systems with full-featured build-in internal speaker. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: fix previous breakage, improve suspend, cleanupsAndreas Mohr2009-07-151-76/+124
| | | | | | | | | | | | | | | | | | | | | | | | | | - fix my previous codec activity breakage (_non-warned_ variable assignment issue) - convert suspend/resume to 32bit I/O access (I/O is painful; to improve suspend/resume performance) - change DEBUG_PLAY_REC to DEBUG_CODEC for consistency - printk cleanup - some logging improvements - minor cleanup/improvements The variable assignment issue above was a conditional assignment to the call_function variable (this ended with the non-preinitialized variable not getting assigned in some cases, thus a dangling stack value, yet gcc 4.3.3 unbelievably did _NOT_ warn about it in this case!!), needed to change this into _always_ assigning the check result. Practical result of this bug was that when shutting down _either_ playback or capture, _both_ streams dropped dead :P Tested, working (plus resume) and checkpatch.pl:ed on 2.6.30-rc5, applies cleanly to 2.6.30 proper with my previous (committed) patches applied. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: azt3328: large codec cleanup, add I2S port etc.Andreas Mohr2009-07-061-454/+524
| | | | | | | | | | | | | | | | | | | | | | | | | | - fully separate codec I/O port handling, enabling the use of a single function each for all codecs (playback, capture, I2S out) - add a new separate pcm for I2S out port (UNTESTED, no I2S DAC available yet) - switch gameport to low frequency while idle, to try to reduce noise/power - improve snd_azf3328_codec_setdmaa() calculation - minor variable type cleanup (u16, bool etc.) - add some doc updates (help those lost Windows users, debug help, ...) Note that due to the large cleanup aspect of the codec I/O change, I was able to fit everything including all improvements into the same binary size!! (a measly 10 bytes more or so) This should now be the almost last patch to this driver (minus some possible kernel clocksource patch and x86_64 fixes or so). I just felt like taking a break from the usual stuff and wanted to get this driver's structure finished, and it's rather clean now... Tested, working and checkpatch.pl:ed on 2.6.30-rc5, applies cleanly to 2.6.30 proper. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* dma-mapping: replace all DMA_24BIT_MASK macro with DMA_BIT_MASK(24)Yang Hongyang2009-04-071-2/+2
| | | | | | | | Replace all DMA_24BIT_MASK macro with DMA_BIT_MASK(24) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'topic/misc' into for-linusTakashi Iwai2009-03-241-4/+4
|\
| * ALSA: Fix missing KERN_* prefix to printk in sound/pciTakashi Iwai2009-02-051-4/+4
| | | | | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: Convert to snd_card_create() in sound/pci/*Takashi Iwai2009-01-121-3/+3
|/ | | | | | | Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Kill snd_assert() in sound/pci/*Takashi Iwai2008-08-131-2/+4
| | | | | | | | Kill snd_assert() in sound/pci/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: PCI168 snd-azt3328: some more fixupsAndreas Mohr2008-06-261-45/+64
| | | | | | | | | | | | | | | | - fix problem with codec register 0x6a being write-only by adding a software shadow register (caused annoying noise after module loading due to _toggling_ between gameport and audio bits instead of configuring them properly) - rename several "Wave" mixer controls to "PCM", since this is what Wine and several other apps are looking for (IOW, _requiring_) and this is what AC97 specs use as naming, too, thus I'd guess it's what these controls are - cleanup, small optimizations Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] PCI168 snd-azt3328 Linux driver: another huge updateAndreas Mohr2008-05-191-396/+796
| | | | | | | | | | | | | | | | | | | | | | | - figured out 'Digital(ly) Enhanced Game Port' functionality, implemented support for it (eliminating gameport polling overhead) - removed optional joystick activation, gameport now enabled unconditionally, since we now support it via the PCI I/O space, not via conflict-prone legacy I/O (which I was thus able to DISABLE now)! - fix playback bug (a muted wave output would get unmuted upon start of playback, of course this is not what we want, thus remember mute state) - implement partial power management: when idle, lower clock rate and disable codec (reduced noise!), and disable gameport circuit when unused - instantiate OPL3 timer, too - much better implementation of snd_azf3328_mixer_write_volume_gradually() - slightly optimized interrupt handling - lots of cleanup This time, I also found a way to verify proper OPL3 operation via MIDI file playback (emulation via synth hardware). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] Fix synchronize_irq() bugs, redundanciesJeff Garzik2008-04-241-1/+2
| | | | | | | | | | | | | | | | free_irq() calls synchronize_irq() for you, so there is no need for drivers to manually do the same thing (again). Thus, calls where sync-irq immediately precedes free-irq can be simplified. However, during this audit several bugs were noticed, where free-irq is preceded by a "irq >= 0" check... but the sync-irq call is not covered by the same check. So, where sync-irq could not be eliminated completely, the missing check was added. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] sound: replace remaining __FUNCTION__ occurencesHarvey Harrison2008-04-241-2/+2
| | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove sound/driver.hTakashi Iwai2008-01-311-1/+0
| | | | | | | | | | | | This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] azt3328.c: small cleanup patchAndreas Mohr2007-05-111-9/+21
| | | | | | | | | | | | | | - change 'PCM' mixer control (pre/post 3D) to 'PCM Output Route' - improve snd_azf3328_debug_show_ports - less aggressive module init message - document Bass/Treble non-bug (prompted by user report - Thank You!!) - add some items to card description - add some I/O register documentation - enhance copyright Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix conflicts between const and __devinitdataTakashi Iwai2007-05-111-2/+2
| | | | | | | | | Marvin told with a depressed face, gcc doesn't like both __devinitdata and const in the same line. So, remove const from all over places now... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 20:58:33 +0100