summaryrefslogtreecommitdiffstats
path: root/sound/pci/echoaudio (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: echoaudio: use after free on errorDan Carpenter2014-03-051-4/+4
| | | | | | | | There are some places where we dereference "chip" in the error message but we've already freed it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: echoaudio: Use standard printk helpersTakashi Iwai2014-02-263-15/+18
| | | | | | Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pci: Convert to snd_card_new() with a device pointerTakashi Iwai2014-02-121-3/+2
| | | | | | Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: PCI: Remove superfluous pci_set_drvdata(pci, NULL) at removeTakashi Iwai2013-05-291-1/+0
| | | | | | | | | | | | | As drvdata is cleared to NULL at probe failure or at removal by the driver core, we don't have to call pci_set_drvdata(pci, NULL) any longer in each driver. The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in hda_intel.c. Since this function itself releases the card instance, we need to clear drvdata here as well, so that it won't be released doubly in the remove callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pci: remove __dev* attributesBill Pemberton2012-12-073-27/+27
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEPTakashi Iwai2012-08-142-7/+7
| | | | | | Otherwise we may get compile warnings due to unused functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Convert to new pm_ops for PCI driversTakashi Iwai2012-07-031-9/+13
| | | | | | | | | | Straightforward conversion to the new pm_ops from the legacy suspend/resume ops. Since we change vx222, vx_core and vxpocket have to be converted, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/misc' into for-linusTakashi Iwai2012-05-211-20/+2
|\
| * ALSA: pci: clean up using module_pci_driver()Takashi Iwai2012-04-241-20/+2
| | | | | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: echoaudio: Remove incorrect part of assertionMark Hills2012-05-061-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | This assertion seems to imply that chip->dsp_code_to_load is a pointer. It's actually an integer handle on the actual firmware, and 0 has no special meaning. The assertion prevents initialisation of a Darla20 card, but would also affect other models. It seems it was introduced in commit dd7b254d. ALSA sound/pci/echoaudio/echoaudio.c:2061 Echoaudio driver starting... ALSA sound/pci/echoaudio/echoaudio.c:1969 chip=ebe4e000 ALSA sound/pci/echoaudio/echoaudio.c:2007 pci=ed568000 irq=19 subdev=0010 Init hardware... ALSA sound/pci/echoaudio/darla20_dsp.c:36 init_hw() - Darla20 ------------[ cut here ]------------ WARNING: at sound/pci/echoaudio/echoaudio_dsp.c:478 init_hw+0x1d1/0x86c [snd_darla20]() Hardware name: Dell DM051 BUG? (!chip->dsp_code_to_load || !chip->comm_page) Signed-off-by: Mark Hills <mark@pogo.org.uk> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: module_param: make bool parameters really boolRusty Russell2011-12-191-1/+1
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: Add module.h to the previously silent sound usersPaul Gortmaker2011-11-011-0/+2
| | | | | | | | Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* sound: fix drivers needing module.h not moduleparam.hPaul Gortmaker2011-11-0114-14/+14
| | | | | | | | | The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* atomic: use <linux/atomic.h>Arun Sharma2011-07-2714-14/+14
| | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*Takashi Iwai2011-06-101-2/+2
| | | | | | | | | The name argument of request_irq() appears in /proc/interrupts, and it's quite ugly when the name entry contains a space or special letters. In general, it's simpler and more readable when the module name appears there, so let's replace all entries with KBUILD_MODNAME. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Use KBUILD_MODNAME for pci_driver.name entriesTakashi Iwai2011-06-101-1/+1
| | | | | | | | | | | | The convention for pci_driver.name entry in kernel drivers seem to be the module name or equivalent ones. But, so far, almost all PCI sound drivers use more verbose name like "ABC Xyz (12)", and these are fairly confusing when appearing as a file name. This patch converts the all pci_driver.name entries in sound/pci/* to use KBUILD_MODNAME for more unified appearance. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: echoaudio: check kmalloc() resultKulikov Vasiliy2010-07-191-0/+2
| | | | | | | | If kmalloc() fails exit with -ENOMEM. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Ack-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-04-071-3/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: mixart: range checking proc file ALSA: hda - Fix a wrong array range check in patch_realtek.c ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream ALSA: hda - Enable amplifiers on Acer Inspire 6530G ASoC: Only do WM8994 bias off transition from standby ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction ASoC: Support second DC servo readback method for wm_hubs ASoC: Avoid wraparound in wm_hubs DC servo correction ALSA: echoaudio - Eliminate use after free ALSA: i2c: cleanup: change parameter to pointer ALSA: hda - Add MSI blacklist for Aopen MZ915-M ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code ALSA: hda - Update document about MSI and interrupts ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981 ALSA: hda - Add missing printk argument in previous patch ASoC: Fix passing platform_data to ac97 bus users and fix a leak ALSA: hda - Fix ADC/MUX assignment of ALC269 codec ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo() ASoC: wm8994: playback => capture
| * ALSA: echoaudio - Eliminate use after freeJulia Lawall2010-04-041-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the call to snd_card_free in the error handling code at the end of the function, as in the other error cases. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E,E2; @@ snd_card_free(E) ... ( E = E2 | * E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-3014-14/+14
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* Merge branch 'fix/misc' into topic/miscTakashi Iwai2010-02-171-1/+3
|\ | | | | | | | | Conflicts: sound/pci/hda/patch_realtek.c
| * ALSA: Echoaudio, fix Guru Meditation #00000005.48454C50Giuliano Pochini2010-02-171-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a division by zero error in the irq handler. There is a small window between the hw_params() callback and when runtime->frame_bits is set by ALSA middle layer. When another substream is already running, if an interrupt is delivered during that window the irq handler calls pcm_pointer() which does a division by zero. The patch below makes the irq handler skip substreams that are initialized but not started yet. Cc to Clemens Ladisch because he proposed an alternate fix. For more information, please read the original thread in the linux-kernel mailing list: http://lkml.org/lkml/2010/2/2/187 Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: Echoaudio - Add suspend support #2Giuliano Pochini2010-02-153-78/+222
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds rearranges parts of the initialization code and adds suspend and resume callbacks. This patch adds suspend and resume callbacks. It also rearranges parts of the initialization code so it can be used in both the first initialization (when the module is loaded we also have to load default settings) and the resume callback (where we have to restore the previous settings). Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: Echoaudio - Add suspend support #1Giuliano Pochini2010-02-1515-80/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the controls init code outside the init_hw() function because is must not be called during resume. This patch moves the code that initializes the card's controls with default valued from the init_hw() function into a separated set_mixer_defaults() function (one for each of the 16 supported cards). This change is necessary because during resume we must resurrect the hardware without losing the previous settings. set_mixer_defaults() must be called only once when the module is loaded. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: Echoaudio - Add firmware cache #2Giuliano Pochini2010-02-152-4/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a simple cache for the firmware files when CONFIG_PM is defined. This patch changes get_firmware(), free_firmware() and adds free_firmware_cache(). The first two functions implement a very simple cache and the latter is used to actually release all the stored firmwares when the module is unloaded. When CONFIG_PM is not enabled those functions act as before, that is free_firmware() releases the firmware immediately and free_firmware_cache() does nothing. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: Echoaudio - Add firmware cache #1Giuliano Pochini2010-02-1518-65/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | Changes the way the firmware is passed through functions. When CONFIG_PM is enabled the firmware cannot be released because the driver will need it again to resume the card. With this patch the firmware is passed as an index of the struct firmware card_fw[] in place of a pointer. That same index is then used to locate the firmware in the firmware cache. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | sound: use DEFINE_PCI_DEVICE_TABLEAlexey Dobriyan2010-02-0914-14/+14
|/ | | | | | | | | Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: echoaudio - Re-enable the line-out control for the Mia cardGiuliano Pochini2009-09-302-4/+27
| | | | | | | Mia has an undocumented line-out control, and it has to be exposed. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: indigo-express: add missing 64KHz flagsGiuliano Pochini2009-04-282-0/+2
| | | | | | | | Indigo-express cards also support 64KHz sampling rate: this patch adds missing SNDRV_PCM_RATE_64000 flags. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/echoaudio' into for-linusTakashi Iwai2009-03-2413-64/+488
|\
| * ALSA: Echoaudio: add support for Indigo express cardsGiuliano Pochini2009-03-198-2/+485
| | | | | | | | | | | | | | This patch adds support for IndigoIOx and IndigoDJx. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: echoaudio: remove line-out volume from vmixer cardsGiuliano Pochini2009-03-164-48/+0
| | | | | | | | | | | | | | | | | | With this patch the drivers do not set the vmixer volume anymore at startup because it is actually the output volume of the voices and ALSA mandates that the volume must be 0 by default. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: echoaudio: remove line-out volume from vmixer cardsGiuliano Pochini2009-03-161-14/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a long standing bug in the drivers for cards with a vmixer because I overlooked a detail in the c++ generic driver by echoaudio. Those cards do not have a line-out volume control. It is a virtual control provided by the generic driver. The bug is harmless because the DSP just ignores the command to change the volume. *NB:* It breaks alsa-tools/echomixer. A patch for it will follow. This patch removes the line-out volume control from vmixer-equipped cards. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'topic/misc' into for-linusTakashi Iwai2009-03-247-14/+13
|\ \
| * | ALSA: echoaudio - replace uses of __constant_{endian}Harvey Harrison2009-02-127-14/+13
| |/ | | | | | | | | | | | | The base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* / ALSA: Convert to snd_card_create() in sound/pci/*Takashi Iwai2009-01-121-3/+3
|/ | | | | | | Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Clean up SG-buffer helper functions and macrosTakashi Iwai2008-08-251-10/+4
| | | | | | | | Clean up SG-buffer helper functions and macros. Helpers take substream as arguments now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: Kill snd_assert() in sound/pci/*Takashi Iwai2008-08-1317-55/+97
| | | | | | | | Kill snd_assert() in sound/pci/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] Fix possible races at free_irq in PCI driversTakashi Iwai2008-04-241-3/+4
| | | | | | | | The irq handler of PCI drivers must be released before releasing other resources since the handler for a shared irq can be still called and may access the freed resource again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove sound/driver.hTakashi Iwai2008-01-3112-12/+0
| | | | | | | | | | | | This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] echoaudio - convert from semaphore to mutexTakashi Iwai2008-01-312-10/+10
| | | | | | | Converted from semaphore to mutex. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] echoaudio - Add barrier() to prevent compiler optimizationGiuliano Pochini2007-10-161-2/+2
| | | | | | | | | This patch adds a barrier() to prevent the compiler from moving the read outside of the loop. It also fixes a comment. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] echoaudio - Remove superfluous volatile prefixTakashi Iwai2007-10-161-8/+7
| | | | | | | | Remove superfluous volatile prefix in the communication struct definition. This eventually fixes the compile warnings with the recent gcc, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Clean up with common snd_ctl_boolean_*_info callbacksTakashi Iwai2007-10-161-30/+3
| | | | | | | Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] add MODULE_FIRMWARE entriesClemens Ladisch2007-05-1112-0/+46
| | | | | | | Add MODULE_FIRMWARE() entries, where appropriate. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] echoaudio - increase sleep time at loading firmwareGiuliano Pochini2007-05-111-2/+2
| | | | | | | | | | The new ASIC code needs more time to set up. (Note: the driver still works fine with the old firmware after this change. The opposite is not true.) From: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Add snd_pcm_group_for_each_entry() for code cleanupTakashi Iwai2007-05-111-3/+1
| | | | | | | | | Added a new macro snd_pcm_group_for_each_entry() just for code cleanup. Old macros, snd_pcm_group_for_each() and snd_pcm_group_substream_entry(), are removed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Add missing sysfs device assignment for ALSA PCI driversTakashi Iwai2007-03-061-0/+2
| | | | | | | Added the missing sysfs device assignment for ALSA PCI drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Add even more 'const' to everything related to TLVTakashi Iwai2007-02-091-2/+2
| | | | | | | | Mark TLV data as 'const' Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] echo3g_dsp.c shouldn't include #include <linux/irq.h>Adrian Bunk2007-02-091-1/+1
| | | | | | | | | Despite being under linux/, linux/irq.h shouldn't be #include'd by arch independent code. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 23:46:58 +0100