summaryrefslogtreecommitdiffstats
path: root/sound/pci (follow)
Commit message (Collapse)AuthorAgeFilesLines
* [ALSA] oxygen: add front panel captureClemens Ladisch2008-01-311-18/+34
| | | | | | | | When a second AC97 codec is present, add a PCM device for capturing from the front panel. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add front panel controlsClemens Ladisch2008-01-314-26/+100
| | | | | | | Add mixer controls for the front panel AC97 codec. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: use AC97 interruptClemens Ladisch2008-01-313-11/+28
| | | | | | | | After an AC97 register read or write, use the AC97 interrupt instead of polling to wait for the access to be completed. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: make line-in exclusive only on XonarClemens Ladisch2008-01-314-31/+54
| | | | | | | | Move the line input switching code to the Virtuoso driver because only the Xonar cards bypass the analog mixer for line input. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix AK4396 double rate upper limitClemens Ladisch2008-01-312-2/+2
| | | | | | | | Fix the upper sample rate limit for the double rate mode of the AK4396 to the value from the datasheet. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Add SPDIF controls as slave on AD codecsTakashi Iwai2008-01-311-0/+3
| | | | | | | | The AD codecs have hardware SPDIF volume/switch controls but they are not assigned to the slave list for virtual master controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda: STAC92xx Line In/Mic as output checkMatthew Ranostay2008-01-311-7/+25
| | | | | | | | | | | This patch checks to see the Line In/Mic port have the ability to do output before creating the the control switches. The 92hd71bxx series of codecs has this issue with the port 0xe, which only allows input. Signed-off-by: Matthew Ranostay <mranostay@embededalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Add missing slave for AD1884 master switchTakashi Iwai2008-01-311-0/+2
| | | | | | | The Speaker switch is missing in the slave list. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Add model for Acer Aspire 5310Andy Shevchenko2008-01-311-0/+1
| | | | | | | | | Simplify usage of the Acer Aspire 5310 laptop with the ALC268 based codec sound card via add correct PCI SSID. Signed-off-by: Andy Shevchenko <andy@smile.org.ua> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Add Conexant 5051 codec supportTakashi Iwai2008-01-311-1/+296
| | | | | | | | | | Added the support for Conexant 5051 audio codec. Right now there are two preset models, laptop and hp. The whole patch is based on the information from the base patch by Linuxant. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] add TempoTec HiFier driverClemens Ladisch2008-01-316-42/+267
| | | | | | | Add a driver for the MediaTek/TempoTec HiFier Fantasia sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: more initializationClemens Ladisch2008-01-312-34/+62
| | | | | | | Initialize more registers of the controller and the second AC97 codec. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: make the number of analog output configurableClemens Ladisch2008-01-315-8/+24
| | | | | | | | Add a field to struct oxygen_model to allow model drivers for cards with less than eight output channels. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] fm801 - Add mute support for FM-only card with FM801 PCI to tuner bridgeAndy Shevchenko2008-01-311-0/+22
| | | | | | | | | | | This is improvement of the early support of the FM-only cards where the fm801 chip represents the PCI to tuner bridge. The tuner initialization isn't included the mute on as well as mute support via V4L request. Proposed patch should fix this at least for 64-PCR model. Signed-off-by: Andy Shevchenko <andy@smile.org.ua> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Add model for Acer Aspire 5315Andy Shevchenko2008-01-311-0/+1
| | | | | | | | | Simplify usage of the Acer Aspire 5315 laptop with the ALC268 based codec sound card via add correct PCI SSID. Signed-off-by: Andy Shevchenko <andy@smile.org.ua> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda: STAC9205 GPIO line fixMatthew Ranostay2008-01-311-4/+4
| | | | | | | | | Fixed issue that the incorrect GPIO line was being pulled high for some STAC9205 based laptops. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Fix handling of multiple capture streamsTakashi Iwai2008-01-311-27/+58
| | | | | | | | | | Fixed the bug that multiple capture streams conflict on Realtek codec routines. Also, this adds a framework to enable the alternative playback stream, e.g. for VoIP. It's not fully implemented yet, though. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda: Add dynamic mono mixer support for STAC92xx codecsMatthew Ranostay2008-01-313-11/+53
| | | | | | | | | Allows for dynamically creating mono out mixer controls and well as mono mux controls. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda: Added mono_out_pin to autoconfigMatthew Ranostay2008-01-312-0/+6
| | | | | | | | | Added a mono_out_pin field to autocfg struct, and code to parse for the mono_out_line. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: remove MIDI for generic cardsClemens Ladisch2008-01-311-3/+4
| | | | | | | | None of the reference design models have MIDI, only the X-Meridian allows to connect a MIDI adapter. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix SPDIF input ratesClemens Ladisch2008-01-311-0/+5
| | | | | | | | Fix up SPDIF input sample rates again: 32 kHz and 64 kHz are not supported. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] fix cs5535 section mismatchRandy Dunlap2008-01-311-1/+1
| | | | | | | | | | snd_cs5535audio_mixer() is only called by __devinit snd_cs5535audio_probe(), so the mixer function can also be __devinit. WARNING: vmlinux.o(.text+0xfdbba0): Section mismatch: reference to .init.data:ac97_quirks (between 'snd_cs5535audio_mixer' and 'process_bm0_irq') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Don't query widget parameter for invalid NIDTakashi Iwai2008-01-311-1/+1
| | | | | | | | | | Don't query a widget parameter for an invalid NID in get_wcaps() but rather returns zero (i.e. no attribute). The read to an non-existing widget may result in a fatal codec communication error. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Optimize snd_hda_pser_pin_def_config()Takashi Iwai2008-01-311-4/+3
| | | | | | | Don't read the widget list again as we already have it at the beginning. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Add afg and mfg preset maskMarc Boucher2008-01-312-0/+5
| | | | | | | | Added afg and mfg preset masks for more finer codec-preset selection. Signed-off-by: Marc Boucher <marc@linuxant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-intel - Add ratelimit to timeout messagesMarc Boucher2008-01-311-4/+6
| | | | | | Signed-off-by: Marc Boucher <marc@linuxant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Add a delay after power state changeMarc Boucher2008-01-311-0/+1
| | | | | | | | | Added a delay after the power state change as a partial workaround for 'hda_intel: azx_get_response timeout' problem on Cxt codecs. Signed-off-by: Marc Boucher <marc@linuxant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Add missing input controls for Cxt5047 test modelMarc Boucher2008-01-311-6/+16
| | | | | | | | | The input volume/switch elements are missing in Cxt5047 test model. Also the patch includes some code clean ups. Signed-off-by: Marc Boucher <marc@linuxant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-codec - Fix laptop models for Cxt5045Marc Boucher2008-01-311-18/+38
| | | | | | | | | | | Change laptop models to three different models, laptop-hpsense, laptop-micsense and laptop-hpmicsense. The first two correspond to the old 'laptop' and 'fujitsu' models. Reassigned the quirk table for the new models. Signed-off-by: Marc Boucher <marc@linuxant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda: Mono mux mixer supportMatthew Ranostay2008-01-311-1/+82
| | | | | | | | | Add support for the mono mux on several 92HD7xxx codecs. Creates a dynamic mixer for the mux selection. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add SPDIF loopback controlClemens Ladisch2008-01-311-0/+38
| | | | | | | Add a mixer control for the SPDIF loopback function. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: TempoTec HiFier is probably not supportedClemens Ladisch2008-01-311-1/+0
| | | | | | | | The TempoTec HiFier has a somwhat different architecture; remove it from the list of cards that are known to be supported. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] cs5535audio - Fix available sample ratesTakashi Iwai2008-01-311-0/+4
| | | | | | | | The available sample rates on CS5535 depend on AC97 codec chip. Set the additional hw params limit. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: optimize snd_pcm_hardware structuresClemens Ladisch2008-01-311-150/+79
| | | | | | | | Add one more indirection to the lookup of the snd_pcm_hardware structures so that we can save the space of the duplicate ones. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add 192 kHz SPDIF input supportClemens Ladisch2008-01-312-24/+63
| | | | | | | | | Change the oxygen_spdif_input_bits_changed() function so that clock changes on the SPDIF input are correctly detected. This means that sample rates greater than 96 kHz are now supported. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix DAC source register fieldsClemens Ladisch2008-01-311-2/+2
| | | | | | | | Fix some wrong values for the definitions of the source masks for DACS 1 and 3. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix control filterClemens Ladisch2008-01-311-1/+1
| | | | | | | | Actually use the template that was maybe changed by the control filter instead of the original one. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: move model-specific data out of common headerClemens Ladisch2008-01-313-7/+20
| | | | | | | | | Instead of having model-specific fields in the common struct oxygen, put them into a private structure that is allocated together with the card structure. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: reduce SPI clock frequency for AK4396/WM8785Clemens Ladisch2008-01-312-3/+3
| | | | | | | | According to the datasheets, the SPI clock cycle must be at least 200 ns for the AK4396 and the WM8785, so we cannot use the default 160 ns. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: allow more sample rates with WM8785Clemens Ladisch2008-01-311-17/+4
| | | | | | | | Allow to record with 32 kHz, 64 kHz, 88.2 kHz and 176.4 kHz with cards that have a WM8785 ADC. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add more symbolsClemens Ladisch2008-01-316-70/+281
| | | | | | | Add symbol definitions for the various codecs and GPIO pins. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: remove MIDI autodetectionClemens Ladisch2008-01-314-5/+7
| | | | | | | | | The MIDI bit in the MISC register is set by default and cannot be used to detect the presence of a MIDI port. Instead, add a parameter to the oxygen_pci_probe() function so that model drivers can specify this. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix pause handlingClemens Ladisch2008-01-311-10/+17
| | | | | | | Use the DMA_PAUSE register for pausing instead of stopping DMA. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: remove magic numbersClemens Ladisch2008-01-314-25/+89
| | | | | | | Replace some magic numbers with register symbols. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] emu10k1 - Fix over-sized kmalloc for TLVTakashi Iwai2008-01-311-1/+1
| | | | | | | | Reported by Al Viro: In copy_tlv(), the size of kmalloc is wrongly calculated. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda-intel - Make azx_get_response() a bit more robustTakashi Iwai2008-01-311-2/+4
| | | | | | | | | In azx_[rirb_]get_response(), the timeout is checked at the end of the loop. It's better to be checked just after the check of the RIRB index to avoid a bogus error with a too long msleep(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] ice1712, ice1724 - Code clean upTakashi Iwai2008-01-3112-407/+557
| | | | | | | | | Clean up ice1712/ice1724 codes. The board-specific data is allocated locally in each code instead of having an ungly union in struct ice1712. Also, fix coding issues in prodigy_hifi.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] hda_proc - Add a number of new settings to proc codec outputAndrew Paprocki2008-01-312-50/+343
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds additional output to the /proc codec#X info. The following pieces of information are added to the output: - Balanced, L/R swap, trigger, impedance sense pin capabilities - Vref pin capabilities - Current Vref pin widget control setting - Default configuration association, sequence, and misc bit test - EAPD/BTL bits conveying balanced mode, EAPD, and L/R swap - Power state modified to show state name as well as setting vs actual value - GPIO parameter output on Audio Function Group, including enumeration of IO pins which are indicated present (Any I and O pins are not output at this time) - Stripe and L/R swap widget capabilities - All digital converter bits: enable, validity, validity config, preemphasis, copyright, non-audio, professional, generation level, and content category - Converter stream and channel values for in/out widgets - SDI select value for in widgets - Unsolicited response widget capability tag and enabled bit - Delay widget capability value - Processing widget capability benign bit and number of coefficients - Realtek Define Registers: processing coefficient, coefficient index [Also, fixed space/tab issues and make codes a bit more readable -- Takashi] Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix playback routingClemens Ladisch2008-01-312-3/+3
| | | | | | | | The default playback routing must be 0xe4, not 0xe1; the front and surround DACs were exchanged. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add register definitionsClemens Ladisch2008-01-316-95/+296
| | | | | | | Add more symbols for registers and register fields. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 08:07:29 +0100