summaryrefslogtreecommitdiffstats
path: root/sound/pci (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda - Disable dynamic-power control for VIA as defaultTakashi Iwai2012-02-021-0/+1
| | | | | | | | | | Since the dynamic pin power-control and the analog low-current mode may lead to pop-noise, it's safer to set it off as default. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Allow analog low-current mode when dynamic power-control is onTakashi Iwai2012-02-021-6/+21
| | | | | | | | | | | | | | | VIA codecs have several different power-saving features, and one of them is the analog low-current mode. But it turned out that the ALC mode causes pop-noises at each on/off time on some machines. As a quick workaround, disable the ALC when another power-saving feature, the dynamic pin power-control, is turned off, too, since the dynamic power-control is already exposed as a mixer enum element so that user can turn it on/off freely. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix the logic to detect VIA analog low-current modeTakashi Iwai2012-02-021-1/+1
| | | | | | | | | | The analog low-current mode must be enabled when the no stream is running but the current detection checks it in a wrong way. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Check power-state before changing in patch_via.cTakashi Iwai2012-02-021-149/+107
| | | | | | | | | Instead of always writing AC_VERB_SET_POWER_STATE, check the current power-state and don't write again if the value is already set. This may reduce the click noise upon the dynamic power-state change (e.g. in analog-input mixer). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: HDA: Fix duplicated output to more than one codecDavid Henningsson2012-02-011-1/+1
| | | | | | | | | | | This typo caused the wrong codec's nid to be checked for wcaps type. As a result, sometimes speakers would duplicate the output sent to HDMI output. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/924320 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix calling cs_automic twice for Cirrus codecs.Dylan Reid2012-02-011-2/+4
| | | | | | | | | | | | | | | | If cs_automic is called twice (like it is during init) while the mic is present, it will over-write the last_input with the new one, causing it to switch back to the automic input when the mic is unplugged. This leaves the driver in a state (cur_input, last_input, and automix_idx the same) where the internal mic can not be selected until it is rebooted without the mic attached. Check that the mic hasn't already been switched to before setting last_input. Signed-off-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'fix/asoc' into for-linusTakashi Iwai2012-01-311-2/+2
|\
| * Merge branch 'for-linus' of ↵Linus Torvalds2012-01-176-7/+12
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: virtuoso: Xonar DS: fix polarity of front output ALSA: Au88x0 - Reduce the number of playback subdevices of au8830 from 32 to 16 ALSA: Au88x0 - Support 4 channels playback when AC97 codecs has SDAC bit ALSA: HDA: Fix internal microphone on Dell Studio 16 XPS 1645 ALSA: Don't prompt for CONFIG_SND_COMPRESS_OFFLOAD ALSA: HDA: Use LPIB position fix for Macbook Pro 7,1
| * | module_param: avoid bool abuse, add bint for special cases.Rusty Russell2012-01-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For historical reasons, we allow module_param(bool) to take an int (or an unsigned int). That's going away. A few drivers really want an int: they set it to -1 and a parameter will set it to 0 or 1. This sucks: reading them from sysfs will give 'Y' for both -1 and 1, but if we change it to an int, then the users might be broken (if they did "param" instead of "param=1"). Use a new 'bint' parser for them. (ntfs has a different problem: it needs an int for debug_msgs because it's also exposed via sysctl.) Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux390@de.ibm.com Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: lm-sensors@lm-sensors.org Cc: linux-rdma@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: alsa-devel@alsa-project.org Acked-by: Takashi Iwai <tiwai@suse.de> (For the sound part) Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> (For the hwmon driver) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | | ALSA: HDA: Remove quirk for Toshiba Qosmio G50David Henningsson2012-01-311-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The user reports that model=auto works better than current handling on a 3.2 based kernel (with jack detection patches backported). Since model=auto is what we prefer these days anyway, the quirk should be removed. Alsa-info for the relevant machine: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/923316/+attachment/2702812/+files/alsa-info.txt.Pbfno2x7bp BugLink: https://bugs.launchpad.net/bugs/923316 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: HDA: Fix jack creation for codecs with front and rear Line InDavid Henningsson2012-01-311-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a codec has both a front and a rear Line In, two controls both named "Line Jack" will be created, which causes parsing to fail. While a long term solution might be to name the jacks differently, this extra check is consistent with what is already being done in many auto-parsers, and will also protect against other cases when two inputs have the same label. BugLink: https://bugs.launchpad.net/bugs/923409 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660Takashi Iwai2012-01-301-8/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turned out that other ASUS laptops require the similar fix to enable the VREF on the pin 0x0f for the secret output amp, not only ASUS A6Rp. Moreover, it's required even when the pin is being used as the output. Thus, writing a fixed value doesn't work always. This patch applies the VREF-fix for all ASUS laptops with ALC861/660 in a fixup function that checks the current value and turns on only the VREF value no matter whether input or output direction is set. The automute function is modified as well to keep the pin VREF upon muting/unmuting via pin-control; otherwise the pin VREF is reset at plugging/unplugging a jack. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: HDA: Remove quirk for Asus N53JqDavid Henningsson2012-01-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The user reports that he needs to add model=auto for audio to work properly. In fact, since node 0x15 is not even a pin node, the existing fixup is definitely wrong. Relevant information can be found in the buglink below. Cc: stable@kernel.org (3.2+) BugLink: https://bugs.launchpad.net/bugs/918254 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Fix silent output on Haier W18 laptopTakashi Iwai2012-01-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The very same problem is seen on Haier W18 laptop with ALC861 as seen on ASUS A6Rp, which was fixed by the commit 3b25eb69. Now we just need to add a new SSID entry pointing to the same fixup. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42656 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda: set mute led polarity for laptops with buggy BIOS based on SSIDGustavo Maciel Dias Vieira2012-01-251-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HP laptop models with buggy BIOS are apparently frequent, including machines with different codecs. Set the polarity of the mute led based on the SSID and include an entry for the HP Mini 110-3100. Signed-off-by: Gustavo Maciel Dias Vieira <gustavo@sagui.org> Tested-by: Predrag Ivanovic <predivan@open.telekom.rs> Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Fix silent output on ASUS A6RpTakashi Iwai2012-01-251-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The refactoring of Realtek codec driver in 3.2 kernel caused a regression for ASUS A6Rp laptop; it doesn't give any output. The reason was that this machine has a secret master mute (or EAPD) control via NID 0x0f VREF. Setting VREF50 on this node makes the sound working again. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: ymfpci - Don't create invalid PCM & mixers when AC97 doesn't supportRaymond Yau2012-01-242-15/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | - check SDAC bit of AC97 primary codec when create "rear" device 3, "4ch" device 2 and "4ch Duplication" switch as the card need a four channels AC97 codec to support surround40. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Fix silent outputs from docking-station jacks of Dell laptopsTakashi Iwai2012-01-231-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent change of the power-widget handling for IDT codecs caused the silent output from the docking-station line-out jack. This was partially fixed by the commit f2cbba7602383cd9cdd21f0a5d0b8bd1aad47b33 "ALSA: hda - Fix the lost power-setup of seconary pins after PM resume". But the line-out on the docking-station is still silent when booted with the jack plugged even by this fix. The remainig bug is that the power-widget is set off in stac92xx_init() because the pins in cfg->line_out_pins[] aren't checked there properly but only hp_pins[] are checked in is_nid_hp_pin(). This patch fixes the problem by checking both HP and line-out pins and leaving the power-map correctly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42637 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: HDA: Use model=auto for Thinkpad T510David Henningsson2012-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The user reports that model=auto works fine for him. Using model=auto bring in new features such as jack detection notification to userspace. Alsa info is available at http://paste.ubuntu.com/805351/ Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Fix buffer-alignment regression with Nvidia HDMITakashi Iwai2012-01-231-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 2ae66c26550cd94b0e2606a9275eb0ab7070ad0e ALSA: hda: option to enable arbitrary buffer/period sizes introduced a regression on machines with Intel controller and Nvidia HDMI. The reason is that the driver modifies the global variable align_buffer_size when an Intel controller is found, and the Nvidia HDMI controller is probed after Intel although Nvidia chips require the aligned buffers. This patch fixes the problem by moving the flag into the local struct so that it's not affected by other controllers. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42567 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Fix a unused variable warningTakashi Iwai2012-01-201-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Just overlooked. sound/pci/hda/patch_realtek.c: In function ‘alc_sku_unsol_event’: sound/pci/hda/patch_realtek.c:643:19: warning: unused variable ‘spec’ [-Wunused-variable] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | snd-hda-intel: better Alienware M17x R3 quirkAlbert Pool2012-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | I have been told that this way the rear headphone connector is working as well; with model=alienware only laptop speakers work. The subsystem of both controller and codec is 1028:0490. Signed-off-by: Albert Pool <albertpool@solcon.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda/realtek - Remove use_jack_tbl fieldTakashi Iwai2012-01-191-4/+1
| | | | | | | | | | | | | | | | | | | | | Now that all quirks have the own unsol handlers, we don't need to check use_jack_tbl flag any more. Let's kill it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda/realtek - Avoid conflict of unsol-events with static quirksTakashi Iwai2012-01-193-24/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recently added jack-kctl support sets the unsol event tags dynamically, while static quirks usually set the fixed tags in the init_verbs array. Due to this conflict, the own unsol event handler can't retrieve the tag and handle it properly any more. For fixing this, avoid calling snd_hda_jack_add_kctls() for static quirks, and always let them use own handlers instead of the standard one for the auto-pareser. Reported-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda/realtek - Avoid multi-ios conflicting with multi-speakersTakashi Iwai2012-01-191-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | When a machine has multiple speakers, we don't need to create the controls for multi-ios. Check the number of primary outputs beforehand. Note that this workaround might not work always with new codecs in future; this assumes that both speakers and multi-io jacks share the same mixers/DACs. If they are routed with different mixers, the individual mixer controls should be needed. But, so far, this doesn't happen with the existing ALC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: virtuoso: Xonar DS: fix polarity of front outputClemens Ladisch2012-01-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The two DACs for the front output and the surround/center/LFE/back outputs are wired up out of phase, so when channels are duplicated, their sound can cancel out each other and result in a weaker bass response. To fix this, reverse the polarity of the neutron flow to the front output. Reported-any-tested-by: Daniel Hill <daniel@enemyplanet.geek.nz> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.34+ <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: Au88x0 - Reduce the number of playback subdevices of au8830 from 32 to 16Raymond Yau2012-01-162-1/+3
| | | | | | | | | | | | | | | | - The maximum number of playback streams depend on the number of sample rate conveters (16) and the number of DMA channels (32). Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: Au88x0 - Support 4 channels playback when AC97 codecs has SDAC bitRaymond Yau2012-01-162-5/+6
| | | | | | | | | | | | | | - Check SDAC bit of AC97 codec for supporting 4 channels playback. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: HDA: Fix internal microphone on Dell Studio 16 XPS 1645David Henningsson2012-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | More than one user reports that changing the model from "both" to "dmic" makes their Internal Mic work. Cc: stable@kernel.org Tested-by: Martin Ling <martin-launchpad@earth.li> BugLink: https://bugs.launchpad.net/bugs/795823 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: HDA: Use LPIB position fix for Macbook Pro 7,1David Henningsson2012-01-131-0/+1
|/ | | | | | | | | | | | Several users have reported "choppy" audio under the 3.2 kernel, and that changing position_fix to 1 has resolved their problem. The chip is an nVidia Corporation MCP89 High Definition Audio, [10de:0d94] (rev a2). Cc: stable@kernel.org (v3.2+) BugLink: https://bugs.launchpad.net/bugs/909419 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/hda' into for-linusTakashi Iwai2012-01-1220-4709/+1556
|\
| * ALSA: hda - Fix the lost power-setup of seconary pins after PM resumeTakashi Iwai2012-01-111-13/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When multiple headphone or other detectable output pins are present, the power-map has to be updated after resume appropriately, but the current driver doesn't check all pins but only the first pin (since it's enough to check it for the mute-behavior). This resulted in the silent output from the secondary outputs after PM resume. This patch fixes the problem by checking all pins at (re-)init time. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740347 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecsTakashi Iwai2012-01-101-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the driver checks only the out_mix_path[] for the primary output route for judging whether to create the loopback-mixing control or not. But, there are cases where aamix-routing is available only on headphone or speaker paths but not on the primary output path. So, the driver ignores such cases inappropriately. This patch fixes the check of the loopback-mixing control by testing all mix-routing paths. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Return the error from get_wcaps_type() for invalid NIDsTakashi Iwai2012-01-102-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When an invalid NID is given, get_wcaps() returns zero as the error, but get_wcaps_type() takes it as the normal value and returns a bogus AC_WID_AUD_OUT value. This confuses the parser. With this patch, get_wcaps_type() returns -1 when value 0 is given, i.e. an invalid NID is passed to get_wcaps(). Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740118 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Use auto-parser for HP laptops with cx20459 codecTakashi Iwai2012-01-101-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | These laptops can work well with the auto-parser and their BIOS setups, and in addition, the auto-parser fixes the problem with S3/S4 where the unsol event handling is killed after resume due to fallback to the single-cmd mode. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740115 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda/cirrus - support for iMac12,2 modelJérémy Lal2012-01-091-0/+9
| | | | | | | | | | | | | | | | | | | | | | This early 2011 model just need to have headphones on GPI02 instead of GPI01, and use BIOS pincfgs. It is detected by codec SSID. The iMac12,1 model is known to work the same way, although maybe not with the same codec SSID. Signed-off-by: Jérémy Lal <kapouer@melix.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: HDA: Remove Poulsbo position fix quirksDavid Henningsson2012-01-081-2/+0
| | | | | | | | | | | | | | | | Now that we have changed the poulsbo chip to use LPIB position fix, we can remove the individual machine quirks that do the same thing. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: HDA: Fix typo for ALC269VB_FIXUP_DMICDavid Henningsson2012-01-081-1/+1
| | | | | | | | | | | | | | | | This fixup is not actually used, so in practice this is just a cosmetic fix. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: HDA: Add support for Cirrus Logic 4213David Henningsson2012-01-081-35/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The CS4213 chip is similar to the CS4210, but it does not have SPDIF capabilities. Also, it has fewer pins, and the vendor specific nid is different. With this patch, we have working inputs and outputs (and automute/autoswitch). However, we don't know anything about the vendor specific processing coefficients, so we don't read or write to that node in this patch. BugLink: https://bugs.launchpad.net/bugs/910792 Tested-by: Hsin-Yi Chen <hychen@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: HDA: Fix automute for Cirrus Logic 421xDavid Henningsson2012-01-081-8/+6
| | | | | | | | | | | | | | | | | | | | There was a bug in the automute logic causing speakers not to mute when headphones were plugged in. Cc: stable@kernel.org Tested-by: Hsin-Yi Chen <hychen@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: HDA: Fix master control for Cirrus Logic 421XDavid Henningsson2012-01-081-12/+1
| | | | | | | | | | | | | | | | | | | | The control name "HP/Speakers" is non-standard, and since there is only one DAC on this chip there is no need for a virtual master anyway. Cc: stable@kernel.org Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: HDA: Use LPIB position fix for OaktrailDavid Henningsson2012-01-081-1/+1
| | | | | | | | | | | | | | | | | | | | According to the thread on alsa-devel, the LPIB method is to prefer for Oaktrail controller chip. Reference: http://mailman.alsa-project.org/pipermail/alsa-devel/2012-January/047800.html Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda_intel: Add Oaktrail identifiersLi Peng2011-12-311-0/+3
| | | | | | | | | | | | | | | | | | | | Oaktrail has 0x8086, 0x080a - AZX_DRIVER_SCH Taken from the Meego patches for Oaktrail Signed-off-by: Li Peng <peng.li@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Fix left-over merge issues in patch_hdmi.cTakashi Iwai2011-12-201-3/+1
| | | | | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * Merge branch 'test/hda-jack' into topic/hdaTakashi Iwai2011-12-2015-495/+766
| |\ | | | | | | | | | | | | | | | Conflicts: sound/pci/hda/patch_hdmi.c sound/pci/hda/patch_via.c
| | * ALSA: hda - Integrate input-jack stuff into kctl-jackTakashi Iwai2011-12-016-277/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of managing input-jack stuff separately, call all stuff inside the kctl-jack creation, deletion and report. The caller no longer needs to care about input-jack. The better integration between input-jack and kctl-jack should be done in the upper layer in near future, but for now, it's implemented locally for more tests. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * ALSA: hda - Don't add channel suffix for headphone pin labelsTakashi Iwai2011-11-211-21/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | The multiple headphone pins are usually handled as copied from the same source, not as individual channels like front and surround. Thus it'd be more correct to avoid the channel suffix for "Headphone" pin labels in snd_hda_get_pin_label() but give an index number instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * ALSA: hda - Fix a typoTakashi Iwai2011-11-211-1/+1
| | | | | | | | | | | | | | | Reported-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * ALSA: hda - Give more unique names by snd_hda_get_pin_label()Takashi Iwai2011-11-166-54/+135
| | | | | | | | | | | | | | | | | | | | | | | | The function now gives more unique names for the output pins by adding some prefix and suffix for the location and the channels. Otherwise, it can pass the index number. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * ALSA: hda - Add missing inclusion of linux/export.hTakashi Iwai2011-11-161-0/+1
| | | | | | | | | | | | | | | | | | This is needed newly since 3.2... Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 12:56:53 +0100