summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm_adsp.h (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: wm_adsp: Allow client to hook into pre_run callbackRichard Fitzgerald2022-11-231-0/+1
| | | | | | | | | | Some HALO-based codecs need some additional custom setup in the pre_run stage of cs_dsp. Implement the callback in wm_adsp to call an optional codec driver callback. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221109165331.29332-11-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Expand firmware loading search optionsSimon Trimmer2022-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The parts supported by this driver can have product-specific firmware and tunings files. Typically these have been used on embedded systems where the manufacturer is responsible for installing the correct product-specific firmware files into /lib/firmware. However, the linux-firmware repository places all available firmwares into /lib/firmware and it is up to the driver to select the correct product-specific firmware from that directory. For example a product containing four smart amplifiers may provide firmware specific for that product and each of the amplifiers may have coefficient files containing tunings for their placement in the mechanical design. This change extends firmware (wmfw) and coefficient (bin) filenames to be of the general form: <cirrus/>part-dspN-fwtype<-system_name<-asoc_component_prefix>>.type Where the cirrus subdirectory, system_name and asoc_component_prefix are optional. New files will be placed in the cirrus subdirectory to avoid polluting the main /lib/firmware/ location. The generic name must be searched in /lib/firmware before /lib/firmware/cirrus so that a generic file in the new location does not override existing product-specific files in the legacy location. The search order for firmware files is: - cirrus/part-dspN-fwtype-system_name-asoc_component_prefix.wmfw - cirrus/part-dspN-fwtype-system_name.wmfw - part-dspN-fwtype.wmfw - cirrus/part-dspN-fwtype.wmfw - Qualifications are added to the filename so that rightwards is more specific. - The system_name is provided by the codec driver. - The asoc_component_prefix is used to identify tunings for individual parts because it would already exist to disambiguate the controls and it makes it obvious which firmware file applies to which device. The optional coefficient file must have the same filename construction as the discovered wmfw except: - where the wmfw has only system_name then the bin file can optionally include the asoc_component_prefix. This is to allow a common wmfw for all amps but separate tunings per amp. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220303155016.122125-1-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Add support for "toggle" preloadersCharles Keepax2022-01-051-0/+8
| | | | | | | | | | | | | In the case a device can support retaining the firmware memory across low power states it is useful for the preloader widget to only power up whilst actually loading/unloading the core, as opposed to the normal operation where the widget is powered for the entire time a firmware is preloaded onto the core. Add support for this mode and a flag to enable it. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220105113026.18955-7-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPsSimon Trimmer2021-09-271-129/+3
| | | | | | | | | | | | | | wm_adsp originally provided firmware loading on some audio DSP and was implemented as an ASoC codec driver. However, the firmware loading now covers a wider range of DSP cores and peripherals containing them, beyond just audio. So it needs to be available to non-audio drivers. All the core firmware loading support has been moved into a new driver cs_dsp, leaving only the ASoC-specific parts in wm_adsp. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210913160057.103842-17-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Separate wm_adsp specifics in cs_dsp_client_opsSimon Trimmer2021-09-271-0/+10
| | | | | | | | | | This is preparation for moving the generic DSP support out of ASoC. The event callbacks let the client add custom handling of events. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210913160057.103842-16-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Split out struct cs_dsp from struct wm_adspSimon Trimmer2021-09-271-28/+32
| | | | | | | | | | | In preparation for moving the generic DSP support out of ASoC split struct wm_adsp into two parts, one will form the structure for the new generic DSP code and embed that one into wm_adsp. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210913160057.103842-15-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Pass firmware names as parameters when starting DSP coreSimon Trimmer2021-09-271-0/+1
| | | | | | | | | | | | | As preparation for moving the generic DSP support out of ASoC pass the firmware names used when loading files as parameters as the generic code can't refer directly to the array specific to wm_adsp. The code remaining in wm_adsp.c doesn't need to change, it can continue to use the string arrays directly. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210913160057.103842-13-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Separate generic cs_dsp_coeff_ctl handlingSimon Trimmer2021-09-271-0/+20
| | | | | | | | | | | | This is preparation for moving the generic DSP support out of ASoC. The majority of the handling of firmware controls is generic and this change separates the generic and ASoC specific details into separate structures and functions and renames the generic code named wm_* to cs_*. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210913160057.103842-11-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Move sys_config_size to wm_adspCharles Keepax2021-09-271-2/+2
| | | | | | | | | | sys_config_size is part of the compressed stream support, move it from what will become generic DSP code so that it remains in ASoC. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210913160057.103842-10-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Rename generic DSP supportSimon Trimmer2021-09-271-24/+24
| | | | | | | | | | This rename is preparation for moving the generic DSP support out of ASoC, generic code named wm_* will be renamed to cs_*. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210913160057.103842-6-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: mark more data structures with the const qualifierSimon Trimmer2021-05-121-1/+1
| | | | | | | | | | | | | The callback structures and memory region type table can be marked as const as they will not change during use. Fix checkpatch warning against wm_adsp_find_region function by moving const keyword to form the 'static const struct' pattern. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210511171459.270169-1-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codec: wm_adsp: use snd_compress_opsKuninori Morimoto2020-04-211-6/+12
| | | | | | | | | | | | We can use snd_compress_ops. Let's switch to use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/87tv1evdlu.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Expose mixer control APILi Xu2019-11-181-0/+4
| | | | | | | | | | | | Expose mixer control API for reading and writing controls from the kernel. This API can be used by ALSA kernel drivers with ADSP support to read and write firmware-defined memory regions. Signed-off-by: Li Xu <li.xu@cirrus.com> Signed-off-by: David Rhodes <david.rhodes@cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1573847653-17094-2-git-send-email-david.rhodes@cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Allow bus error handler to be called directlyCharles Keepax2019-07-251-2/+2
| | | | | | | | | | There is no need for end drivers to add helper functions to allow the bus error handler to be called, simply update the prototype so it can be called directly. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190725163931.24964-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-191-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: wm_adsp: Add WDT expiry IRQ handling support for Halo coreStuart Henderson2019-03-191-0/+1
| | | | | | Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Add HALO MPU fault loggingRichard Fitzgerald2019-03-191-0/+1
| | | | | | | | | | | | | A Halo Core DSP has a memory protection unit that can trap and signal memory access faults. This patch adds a function that dumps the fault information. The interrupt reaches the host via the parent codec interrupt controller so this fault function is exported to be called by the codec driver. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Add support for new Halo core DSPsWen Shi2019-03-191-0/+8
| | | | | | | | | | | | | | The Halo core is a new generation of audio DSP architecture from Cirrus Logic. A new iteration of the WMFW file format (v3) is also added, for this new architecture. Currently this format is not supported on the old ADSP2 architecture however support may be added for it in the future. Signed-off-by: Wen Shi <wenshi@opensource.cirrus.com> Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Factor out DSP specific operationsCharles Keepax2019-03-191-5/+30
| | | | | | | | | | In preparation for the addition of more types of DSP core refactor the handling of DSP specific operations such as starting the memory or enabling the core into a set of callbacks. This should make it easier to add new core types and allow for more code reuse between them. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Move wm_adsp2_set_dspclk to CODEC driversRichard Fitzgerald2019-03-191-2/+4
| | | | | | | | | | | | | | The original wm_adsp2_early_event took an additional frequency argument for clocking control so could not be used directly as a DAPM callback. But this setup could equally be done by the codec driver function wrapping wm_adsp2_early event. In preparation for adding support for new core types wm_adsp2_set_dspclk has been exported, and the freq argument removed so that it can be used directly as a DAPM callback. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Don't export wm_adsp2_lockCharles Keepax2019-03-191-1/+0
| | | | | | | | This function is not presently called from outside the adsp code and nor should it be, as such stop exporting it. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Shutdown any compressed streams on DSP watchdog timeoutCharles Keepax2019-03-191-0/+1
| | | | | | | | | If a watchdog timeout is received from the DSP it is safe to assume the DSP is not functioning anymore and as such any active compressed streams should be put into an error state. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Add support for multiple compressed buffersStuart Henderson2019-02-221-2/+2
| | | | | | | | | | | Currently, only a single compressed stream is supported per firmware. Add support for multiple compressed streams on a single firmware, this allows additional features like completely independent trigger words or separate debug capture streams to be implemented. Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Make DSP name configurable by codec driverRichard Fitzgerald2018-08-081-0/+2
| | | | | | | | | | | | | Instead of harcoding that a core must always be called "DSPn" add a name member to struct wm_adsp so that the owning codec driver can provide a custom name. This allows for re-use of the wm_adsp driver with parts where the processing cores are named differently. If no name is provided the default DSPn name is used. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Declare firmware controls from codec driverRichard Fitzgerald2018-08-081-1/+9
| | | | | | | | | To allow for more flexibility in naming of DSP-type cores move the creation of the firmware controls to the codec drivers instead of having a hardcoded list in wm_adsp. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'asoc/topic/wm9090', 'asoc/topic/wm9712', ↵Mark Brown2018-03-281-4/+4
|\ \ | | | | | | | | | 'asoc/topic/wm9713' and 'asoc/topic/wm_adsp' into asoc-next
| | * ASoC: wm_adsp: Fix some signedness errors in register accessRichard Fitzgerald2018-02-161-4/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | base and sysclk_reg should be unsigned int, as that is what regmap takes as a register address. sysclk_mask is used to mask unsigned register values so should be unsigned. sysclk_shift is a shift value so is not allowed to be negative. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* / ASoC: arizona: replace codec to componentKuninori Morimoto2018-02-141-3/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now we can replace Codec to Component. Let's do it. Because there are many drivers which are using arizona, we need to update these all related drivers in same time. Otherwise compile error/warning happen Note: cs47l24 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 wm5102 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 wm5110 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 wm8997 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 wm8998 xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: add support for DSP region lockMayuresh Kulkarni2017-04-051-0/+23
| | | | | | | | | | | | | Newer ADSP2V2 codecs include a memory protection unit that can be set to trap illegal accesses. When enabling an ADSPV2 core we must configure the memory region traps so that the firmware can access its own memory. Signed-off-by: Mayuresh Kulkarni <mkulkarni@opensource.wolfsonmicro.com> Signed-off-by: Nikesh Oswal <Nikesh.Oswal@wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Add support for ADSP2V2Richard Fitzgerald2017-04-051-0/+1
| | | | | | | | | | Adds support for ADSP2V2 cores. Primary differences are that they use a 32-bit register map compared to the 16-bit register map of ADSP2V1, and there are some changes to clocking control. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Add mechanism to preload firmware on a coreCharles Keepax2017-01-061-0/+11
| | | | | | | | | | | | | | | | | | | | | As requirements to bring up audio paths are continuous getting tighter and the DSP download to most ADSP devices happens over an external bus it can become an important factor in the path bring up time. As such sometimes it is a reasonable trade off to download the firmware ahead of when it will be required and take a small hit on power consumption for keeping the core powered up. This "preloading" adds an additional control for each DSP core "DSPx Preload Switch" that when set to true will power up the DSP core and download the firmware currently selected in the "DSPx Firmware" control. Whilst the core is preloaded the current firmware can not be changed and the CODEC will be kept powered up and SYSCLK held on. Although future improvements may allow the SYSCLK to be powered down as well because the hardware only requires SYSCLK whilst the download is actually taking place, but this is not covered in this series. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Remove redundant extern declarationsCharles Keepax2016-11-291-13/+12
| | | | | | | | Functions are given external linkage by default making the extern's unnecessary, as such remove them. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Firmware controls should be added as codec controlsRichard Fitzgerald2016-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | We were adding firmware controls as card controls (using snd_soc_add_codec_controls). The DSP is part of a specific codec so we should be adding them as codec controls. Adding as codec controls also means that if the codec has a name_prefix it will be added to the control name, which won't happen when adding as a card control. As that was the only use of the card pointer in struct wm_adsp it can be removed. For ADSP2 codecs a wm_adsp2_codec_probe() was added since the original control handling was written, and that's the logical place to store a pointer to the codec rather than delaying it until the codec is powered-up. For ADSP1 we don't use a codec_probe() stage so the codec pointer initialization replaces the original card pointer initialization in wm_adsp1_event(). Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Allow preloader to do the final shutdown of the DSPCharles Keepax2016-09-261-1/+1
| | | | | | | | | | | | | | | The booting process for the DSP is clearly separated into two parts, the preloader brings up the core and downloads code, then the main widget starts the code actually executing. However the shutdown sequence is all handled with the main widget. To allow the preloading to be run independently of the main audio bring up it makes sense, and is generally just cleaner, for the preloader widget to shutdown those things it initialised. This patch moves the appropriate parts of the shutdown process into the preloader widget. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Make DSP preloader a supply widgetCharles Keepax2016-09-241-2/+3
| | | | | | | | | | | | | | | | | | | | | Currently the DSP loading is split into two widgets, the preloader that is a snd_soc_dapm_dai_link widget which starts a thread to download the firmware, and the DSP itself which is a snd_soc_dapm_out_drv and synchronises the thread back in to the DAPM sequence. This allows the firmware download to be overlapped with the rest of the path bring up. The use of a snd_soc_dapm_dai_link widget requires the preloader to be part of the audio path in DAPM, really a supply widget is a better fit for the preloader. The preloader is something that needs to be done for the DSP to function, not a part of the audio path itself. This change makes the DSP preloader widget a supply widget, which as well as probably being a better fit will also make it much simpler to power up the preloader widget to trigger firmware download to the core independently of the audio path coming up. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Separate concept of booted and runningCharles Keepax2016-09-241-0/+2
| | | | | | | | | | | | | | | | Currently the wm_adsp driver has a flag that indicates the DSP is "running", this flag is used to gate access to the hardware. However this flag is actually set in the firmware download thread after the firmware has been downloaded, but this is before the core is actually started running, so really it currently indicates that the core has been booted and is perhaps running. This patch clearly separates out the concepts of booted (firmware is downloaded) and running (code is executing on the DSP) within the wm_adsp driver. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Specifically propagate voice trigger event to callerCharles Keepax2016-05-301-0/+4
| | | | | | | | | | | | The DSP uses an IRQ to indicate data is available on the compressed stream. For voice trigger use-cases the first such IRQ can be considered an indication that the user has spoken the key phrase triggering the firmware. Provide a means for the ADSP code to communicate back to the calling driver whether an IRQ should be considered as trigger event or not. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: free memory when unloaded or closedRichard Fitzgerald2016-04-271-0/+1
| | | | | | | | The patch adds a wm_adsp2_remove() function to ensure that memory is freed when the driver is unloaded or shut down. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Move setting of DSP speed into CODEC specific codeCharles Keepax2016-01-291-5/+3
| | | | | | | | | | | | The ADSP code should be agnostic of which CODEC it runs upon, currently there is only one remaining part of the implementation that doesn't follow this. When the DSP is booted on ADSP2 we read ARIZONA_SYSTEM_CLOCK_1 and use that to set the initial speed for the DSP clock. This patch factors that out into CODEC specific code, leaving the ADSP code entirely CODEC agnostic. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Pull data through compressed readCharles Keepax2016-01-061-0/+2
| | | | | | | | | Data is read in blocks of up to one fragment is size from the circular buffer on the DSP and is re-packed to remove the padding byte that exists in the DSP memory map. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Add a handler for the compressed IRQCharles Keepax2016-01-061-0/+3
| | | | | | | | | | | | Here support is added for responding to DSP IRQs that are used to indicate data being available on the DSP. The idea is that we check the amount of data available upon receipt of an IRQ and on subsequent calls to the pointer callback we recheck once less than one fragment is available (to avoid excessive SPI traffic), if there is truely less than one fragment available we ack the last IRQ and wait for a new one. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Attach buffers and streams togetherCharles Keepax2015-12-231-0/+1
| | | | | | | | | | | | | | The stream is created whilst the compressed stream is opened and a buffer is created when the DSP powers up. It is necessary at a point once both the DSP has powered up and the the stream has been opened to connect a stream to a buffer on the DSP. This is done in the trigger callback as this is after the DSP has been powered and obviously the stream must be open. Note that whilst the connect is currently trivial it is expected that this will get more complex when support for multiple buffers/streams per DSP is added. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Add code to locate and initialise compressed bufferCharles Keepax2015-12-231-0/+2
| | | | | | | | | | | | Add code that locates and initialises the buffer of compressed data on the DSP if the firmware supported compressed data capture. The buffer struct (wm_adsp_compr_buf) is kept separate from the stream struct (wm_adsp_compr) this will allow much easier support of multiple streams of data from the one DSP in the future, although support for this will not be added in this patch chain. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Add support for opening a compressed streamCharles Keepax2015-12-231-0/+13
| | | | | | | | | Allow user-space to open a compressed stream, although no data will be passed yet, as part of this adding the ability to define supported capabilities per firmware and check these match the stream being opened. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Fixup some minor formatting and checkpatch errorsCharles Keepax2015-12-121-2/+2
| | | | | Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Replace debugfs lock with more general DSP power lockCharles Keepax2015-12-121-1/+2
| | | | | | | | | | Most events around the DSP just need to be locked to ensure that the DSP can't change power state whilst they are happening. This includes the debugfs entries and this will make sorting the rest of the locking simpler. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* debugfs: Pass bool pointer to debugfs_create_bool()Viresh Kumar2015-10-041-1/+1
| | | | | | | | | | | | | | | | | | | Its a bit odd that debugfs_create_bool() takes 'u32 *' as an argument, when all it needs is a boolean pointer. It would be better to update this API to make it accept 'bool *' instead, as that will make it more consistent and often more convenient. Over that bool takes just a byte. That required updates to all user sites as well, in the same commit updating the API. regmap core was also using debugfs_{read|write}_file_bool(), directly and variable types were updated for that to be bool as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: wm_adsp: Move DSP Rate controls into the codecRichard Fitzgerald2015-06-191-1/+1
| | | | | | | | | | | | | | | | | | The rate controls are codec-specific, it's not possible to generically say what the range or the meaning of each control is (or even if they exist at all) - that depends on the particular codec. This is currently being handled for Arizona codecs by putting an Arizona-specific table of controls inside the wm_adsp driver. This creates a dependency between wm_adsp and arizona.c, and is an awkward solution if the ADSP is used in another family of codecs Fix this by moving the Arizona-specific rate controls into the Arizona codec drivers. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: Add basic debugfs entriesRichard Fitzgerald2015-06-111-1/+10
| | | | | | | | This patch adds some debugfs nodes to get information about the currently running firmware. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm_adsp: create ALSA controls from wm_adsp driverRichard Fitzgerald2015-06-111-1/+0
| | | | | | | | | Now that we have a codec_probe stage initialization in the wm_adsp driver, we can make the wm_adsp driver create its own ALSA controls instead of having that responsibility pushed to every codec driver. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 14:53:06 +0100