summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'topic/asoc' into for-linusTakashi Iwai2010-05-2064-1840/+5879
|\ | | | | | | | | Conflicts: sound/soc/codecs/ad1938.c
| * ASoC: tpa6130a2: Remove CPVSS and HPVdd suppliesJarkko Nikula2010-05-201-34/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | These pins are for decoupling capacitors for the internal charge pumps in TPA6130A2 and TPA6140A2 and not for connecting external supply. Thanks to Eduardo Valentin <eduardo.valentin@nokia.com> for pointing out the issue with TPA6130A2 and Ilkka Koskinen <ilkka.koskinen@nokia.com> with TPA6140A2. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Reviewed-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tpa6130a2: Define output pins with SND_SOC_DAPM_OUTPUTJarkko Nikula2010-05-191-2/+2
| | | | | | | | | | | | | | | | | | Codec output pin should be defined with SND_SOC_DAPM_OUTPUT as otherwise external widgets doesn't alter the output state. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: TWL6040: Enable earphone path in codecJorge Eduardo Candelaria2010-05-191-1/+20
| | | | | | | | | | | | | | | | | | | | Add control to enable earphone driver in TWL6040 codec. This driver is connected to HSDAC Left. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320dac33: Avoid powering off while in BIAS_OFFPeter Ujfalusi2010-05-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | Avoid calling the dac33_hard_power when the codec was already in BIAS_OFF state. This could happen in device suspend and module removal time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320dac33: Use dev_dbg in dac33_hard_power functionFelipe Balbi2010-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | Since the cases when the same power state would be set again handled gracefully, we do not need to use dev_warn. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: TWL4030: Add control for digimic Left Right swapPeter Ujfalusi2010-05-121-0/+12
| | | | | | | | | | | | | | | | | | | | The codec has support for swapping the left and right channels in the digimic interface. New kcontrol to handle this bit. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Don't restart unconfigured WM8994 FLLsMark Brown2010-05-111-0/+3
| | | | | | | | | | | | | | | | If the FLL is not configured attempting to resume it will produce a warning message so skip the resume. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Reorder power down sequence for WM hubs devicesMark Brown2010-05-111-4/+4
| | | | | | | | | | | | | | | | | | Disable the output stage prior to the delay stage rather than the other way around. Fixes merge issue with previous headphone output path corrections. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Add additional WM hubs DC servo traceMark Brown2010-05-111-0/+4
| | | | | | | | | | | | | | | | Log the values we're getting back from the DC servo and the values we write to it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Add register write logging for WM8994Mark Brown2010-05-111-0/+2
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Use more idiomatic driver name for WM8731Mark Brown2010-05-101-1/+1
| | | | | | | | | | | | | | Make dev_() prints much prettier. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Refactor WM8731 regulator management into bias managementMark Brown2010-05-101-23/+28
| | | | | | | | | | | | | | This allows more flexible integration with subsystem features. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Remove unneeded suspend bias managment from CODEC driversMark Brown2010-05-1021-31/+7
| | | | | | | | | | | | | | | | | | | | | | The core will ensure that the device is in either STANDBY or OFF bias before suspending, restoring the bias in the driver is unneeded. Some drivers doing slightly more roundabout things have been left alone for now. Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: tpa6130a2: Fix for the custom kcontrol functionsPeter Ujfalusi2010-05-071-8/+10
| | | | | | | | | | | | | | | | | | | | | | Since the functions arre only used for volume register, change their name, and also fix them to properly handle the cases, when via soc core the volume is limited. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * Revert "ASoC: tpa6130a2: Support for limiting gain"Peter Ujfalusi2010-05-071-68/+8
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 6f3991152f20933b77eff30413e893bf1a15e578. Since core has now support for limiting the volume on controls this patch is not needed. Furthermore, this patch actually prevents the core to set new volume on the TPA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * Merge branch 'for-2.6.35' of ↵Takashi Iwai2010-05-064-138/+295
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
| | * ASoC: tlv320dac33: Use codec defaults for LOM/LOP and DAC powerPeter Ujfalusi2010-05-061-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not change the codec defaults for the following registers: 0x40, 0x41: Line output gains, do not use amplification 0x42: LOM/LOP Voltage hold, and selection 0x44: LOM inversion control It has been found, that the values configured to these registers can cause amplification, which can make the output of DAC33 distorted. The codec reset values are considered safe in all environmnts. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tpa6130a2: Support for limiting gainPeter Ujfalusi2010-05-061-8/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for platform dependent gain limiting on the tpa6130a2 (and tpa6140a2) Headset amplifier. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320aic3x: Add platform data and reset gpio handlingJarkko Nikula2010-05-061-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Handle the reset GPIO within the codec driver in order to follow the startup protocol for the tlv320aic3x codecs. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tpa6130a2: TLV mapping for tpa6140a2Peter Ujfalusi2010-05-041-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both tpa6130a2, and tpa6140a2 is supported by the same driver, but the gain dB scaling is different on the amplifiers. Provide different mixer control for the chips with correct TLV mapping. User space will see: "TPA6130A2 Headphone Playback Volume" in case of 6130 "TPA6140A2 Headphone Playback Volume" in case of 6140 The way machine drivers are using this amplifier remained the same. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320dac33: Support for turning off the codecPeter Ujfalusi2010-05-031-21/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let the codec to hit OFF instead of STANDBY, when there is no activity. When the codec is off, than the associated regulator can be also turned off (if the number of users on the regulator is 0). After initialization, the codec remains in power off, it is only turned on for reading the ID registers (also testing the regulators). The codec power is enabled, when the codec is moving from BIAS_OFF to BIAS_STANDBY. The codec is turned off, when it hits BIAS_OFF. There are few scenarios, which has to be taken care:: 1. Analog bypass caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, but we does not need to execute the playback related configuration 2. Playback caused BIAS_OFF -> BIAS_ON We need to power on the codec, and do the chip init, and also we need to execute the playback related configuration. 3. Playback start, while Analog bypass is on (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is already on. 4. Analog bypass enable, while playback (BIAS_ON -> BIAS_ON) Nothing need to be done. 5. Playback start withing soc power down timeout (BIAS_ON -> BIAS_ON) We need to execute the playback related configuration. The codec is still on. Since the power up, and the codec init is optimized, the added overhead in stream start is minimal. Withing this patch, the hard_power function is now only doing what it supposed to: only handle the powers, and GPIO reset line. The codec initialization and state restore has been moved out. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320dac33: Manage a pointer for snd_pcm_substream in private structurePeter Ujfalusi2010-05-031-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As a preparation for supporting codec to be turned off, when we are in BIAS_STANDBY. The substream must be easily available in other places than pcm_* callbacks. Manage a pointer in _startup, and _shutdown for this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320dac33: Revised module loading, and DAC33 ID readPeter Ujfalusi2010-05-031-19/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Optimize the way how tlv320dac33 is powered uppon module and soc initialization. Also read the DAC33 ID registers, and update the reg_cache to reflect it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320dac33: Optimize power up, and restorePeter Ujfalusi2010-05-031-67/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On power up we only need to initialize the codec, and restore only registers, which are not in either in DAPM nor in the playback start sequence. These are mostly gain related registers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: TWL4030: Remove OUTL/R outputsPeter Ujfalusi2010-05-031-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | OUTL/R are leftovers from the original driver, and they are no longer needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: TWL4030: AIF/APLL fix in DAPM domainPeter Ujfalusi2010-05-031-22/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch orders the APLL and AIF power sequence in case of HiFi (audio in TWL4030 terms) playback/capture. We also need to make sure that the AIF is running during playback/capture, when there is no valid DAPM route available. For this purpose I introduce these virtual widgets: /* To have complete playback route all the time */ DAPM_OUTPUT("Virtual HiFi OUT") /* Will keep AIF/APLL enabled */ /* To have complete capture route all the time */ DAPM_INPUT("Virtual HiFi IN") /* Will keep AIF/APLL enabled */ /* To have complete playback route for the voice module */ DAPM_OUTPUT("Virtual Voice OUT") /* Will keep APLL enabled */ The DAPM_SUPPLY widgets for APLL and AIF are placed in a way, that during any audio activity the needed configuration of AIF and APLL will be enabled (playback, capture, analog loopback, digital loopback, and voice activity). The apll reference counting code has been lifted, and modified from Liam Girdwood's earlier patch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320dac33 - disable regulators at i2c remove()Liam Girdwood2010-04-281-0/+1
| | | | | | | | | | | | | | | | | | Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | ASoC: Add WM9090 amplifier driverMark Brown2010-04-304-0/+1494
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WM9090 is a high performance low power audio subsystem, including headphone and class D speaker drivers. Note that this driver is a standalone CODEC driver and so is only immediately suitable for use with the WM9090 as a standalone sound card taking line inputs, or with a DAC with no software control. The pending ASoC multi-CODEC support will expand the range of systems that can use the driver, or system-specific adaptations can be made. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | ASoC: Remove redundant WM8960 SYSCLKSEL clkdiv optionMark Brown2010-04-282-5/+0
| |/ | | | | | | | | | | | | The SYSCLK source is automatically managed when configuring the PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * Merge branch 'for-2.6.35' of ↵Takashi Iwai2010-04-272-54/+277
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
| | * ASoC: tlv320aic3x: Add basic regulator supportJarkko Nikula2010-04-271-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the TLV320AIC3x supplies and enables all of them for the entire lifetime of the device. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320aic3x: Change bias management semanticsJarkko Nikula2010-04-271-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move PLL enable from BIAS_ON state to BIAS_PREPARE to be pair with BIAS_STANDBY where PLL is disabled. Remove also old comments about power control. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320aic3x: Remove needless power off from aic3x_set_bias_levelJarkko Nikula2010-04-271-34/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These ADC, DAC and output pin power off commands are needless in aic3x_set_bias_level since they are not enabled in aic3x_init and they are defined in aic3x_dapm_widgets so the ASoC DAPM will take care of them anyway. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320aic3x: Remove unused version stringJarkko Nikula2010-04-271-2/+0
| | | | | | | | | | | | | | | | | | Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320dac33: FIFO caused delay reportingPeter Ujfalusi2010-04-261-5/+217
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320dac33: Calculate the interface speed during burstsPeter Ujfalusi2010-04-261-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the DAC33 FIFO is in use the dai interface is running in much higher speed than the sampling frequency. Calculate the rate based on the internal base frequency and the bclk divider. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320dac33: Change magic numbers used in Mode7Peter Ujfalusi2010-04-261-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Upper and Lower threshold values are used as magic numbers. Replace them with defines for later use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320dac33: Skip calculations in FIFO Bypass modePeter Ujfalusi2010-04-261-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need for calculations for FIFO bypass mode. Just in case set the nsample maximum limit, which has been done in the calculation phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| | * ASoC: tlv320dac33: Fix for early interrupt in FIFO Mode1Peter Ujfalusi2010-04-261-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alarm threshold interrupt is triggered right after the playback start. This interrupt is recieved during the first burst period, and caused the state machine to write additional nSample command, which has to be avoided. To fix this issue move the DAC33 interrupt unmasking after we configured the PREFILL register with a small delay. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | ASoC: UDA134X: Add UDA1345 CODEC supportVladimir Zapolskiy2010-04-261-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Philips UDA1345 CODEC. The CODEC has only volume control, de-emphasis, mute, DC filtering and power control features. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | ASoC: Warn on low WM8994 AIFCLKMark Brown2010-04-261-0/+5
| | | | | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | ASoC: Correct inversion of speaker mixer PCM switchMark Brown2010-04-261-1/+1
| | | | | | | | | | | | | | | | | | Reported-by: Anti Sullin <anti.sullin@artecdesign.ee> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | ASoC: ad193x: fix typo, delete redundant spaceBarry Song2010-04-231-4/+4
| | | | | | | | | | | | | | | | | | Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | ASoC: ad193x: fix wrong register setting in ad193x_set_dai_fmtBarry Song2010-04-231-23/+25
| |/ | | | | | | | | | | Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Allow unspecified source when stopping WM8994 FLLsMark Brown2010-04-211-0/+5
| | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Tone down debugging for WM8994 class WMark Brown2010-04-201-7/+7
| | | | | | | | | | | | It's a little verbose during path changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Set full range of WM8994 FLL Fratio valuesMark Brown2010-04-201-1/+10
| | | | | | | | | | | | | | | | Use all the available Fratio values when configuring the WM8994 FLL, not just 0 and 3, following more complete characterisation of the device performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Support FLL input clock selection on WM8994Mark Brown2010-04-202-2/+20
| | | | | | | | | | | | | | | | The WM8994 FLL can be clocked from one of four inputs, the two MCLKs and the LRCLK and BCLK of the AIF associated with the FLL. Allow all four inputs to be used rather than defaulting to MCLK1. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: da7210: Fencepost error in reg cache readPhil Carmody2010-04-201-1/+1
| | | | | | | | | | | | | | | | | | An index equal to the array size may not be accessed. Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 17:44:40 +0100