summaryrefslogtreecommitdiffstats
path: root/sound/soc/qcom/lpass-cpu.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readableSrinivas Kandagatla2021-06-241-1/+6
| | | | | | | | | | | | | | Currently IRQ_CLEAR register is marked as write-only, however using regmap_update_bits on this register will have some side effects. so mark IRQ_CLEAR register appropriately as readable and volatile. Fixes: da0363f7bfd3 ("ASoC: qcom: Fix for DMA interrupt clear reg overwriting") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210624092153.5771-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge series "ASoC: tlv320aic32x4: Add support for TAS2505" from Claudius ↵Mark Brown2021-06-231-0/+79
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Heine <ch@denx.de>: Hi, this is v2 from my patchset that add support for the TAS2505 to the tlv320aic32x4 driver. kind regards, Claudius Changes from v1: - clarified commit message of first patch, which add the type value to the struct - removed unnecessary code to put and get speaker volume - removed 'Gain' from 'HP Driver Playback Volume' control - fixed rebase issues Claudius Heine (3): ASoC: tlv320aic32x4: add type to device private data struct ASoC: tlv320aic32x4: add support for TAS2505 ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible .../bindings/sound/tlv320aic32x4.txt | 1 + sound/soc/codecs/tlv320aic32x4-i2c.c | 22 ++- sound/soc/codecs/tlv320aic32x4-spi.c | 23 ++- sound/soc/codecs/tlv320aic32x4.c | 139 +++++++++++++++++- sound/soc/codecs/tlv320aic32x4.h | 10 ++ 5 files changed, 186 insertions(+), 9 deletions(-) base-commit: 70585216fe7730d9fb5453d3e2804e149d0fe201 -- 2.32.0
| * ASoC: qcom: lpass-cpu: Fix pop noise during audio capture beginSrinivasa Rao Mandadapu2021-06-071-0/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes PoP noise of around 15ms observed during audio capture begin. Enables BCLK and LRCLK in snd_soc_dai_ops prepare call for introducing some delay before capture start. (am from https://patchwork.kernel.org/patch/12276369/) (also found at https://lore.kernel.org/r/20210524142114.18676-1-srivasam@codeaurora.org) Co-developed-by: Judy Hsiao <judyhsiao@chromium.org> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210604154545.1198337-1-judyhsiao@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: qcom: lpass-cpu: Use devm_platform_get_and_ioremap_resource()Yang Yingliang2021-06-211-7/+2
| | | | | | | | | | | | | | | | | | Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210615140711.1676704-2-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: qcom: Add four speaker support on MI2S secondarySrinivasa Rao Mandadapu2021-06-141-0/+33
|/ | | | | | | | | | | Add four speaker support on MI2S secondary block by using I2S SD1 line on gpio52 pin, and add channel map control support in the lpass-cpu audio driver. Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210609133039.4648-1-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: lpass-cpu: Use optional clk APIsStephen Boyd2021-05-211-11/+1
| | | | | | | | | | | | | | | | | This driver spits out a warning for me at boot: sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2 but it looks like it is all an optional clk. Use the optional clk APIs here so that we don't see this message and everything else is the same. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Banajit Goswami <bgoswami@codeaurora.org> Fixes: 3e53ac8230c1 ("ASoC: qcom: make osr clock optional") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210520014807.3749797-1-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge tag 'mute-led-rework' of ↵Mark Brown2021-03-311-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13 ALSA: control - add generic LED API This patchset tries to resolve the diversity in the audio LED control among the ALSA drivers. A new control layer registration is introduced which allows to run additional operations on top of the elementary ALSA sound controls. A new control access group (three bits in the access flags) was introduced to carry the LED group information for the sound controls. The low-level sound drivers can just mark those controls using this access group. This information is not exported to the user space, but user space can manage the LED sound control associations through sysfs (last patch) per Mark's request. It makes things fully configurable in the kernel and user space (UCM). The actual state ('route') evaluation is really easy (the minimal value check for all channels / controls / cards). If there's more complicated logic for a given hardware, the card driver may eventually export a new read-only sound control for the LED group and do the logic itself. The new LED trigger control code is completely separated and possibly optional (there's no symbol dependency). The full code separation allows eventually to move this LED trigger control to the user space in future. Actually it replaces the already present functionality in the kernel space (HDA drivers) and allows a quick adoption for the recent hardware (ASoC codecs including SoundWire). snd_ctl_led 24576 0 The sound driver implementation is really easy: 1) call snd_ctl_led_request() when control LED layer should be automatically activated / it calls module_request("snd-ctl-led") on demand / 2) mark all related kcontrols with SNDRV_CTL_ELEM_ACCESS_SPK_LED or SNDRV_CTL_ELEM_ACCESS_MIC_LED Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ASoC: qcom: lpass-cpu: Fix lpass dai ids parseSrinivasa Rao Mandadapu2021-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | The max boundary check while parsing dai ids makes sound card registration fail after common up dai ids. Fixes: cd3484f7f138 ("ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY") Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/20210311154557.24978-1-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: constify of_phandle_args in snd_soc_get_dai_name()Krzysztof Kozlowski2021-03-101-1/+1
|/ | | | | | | | | | | The pointer to of_phandle_args passed to snd_soc_get_dai_name() and of_xlate_dai_name() implementations is not modified. Since it is being used only to translate passed OF node to a DAI name, it should not be modified, so mark it as const for correctness and safer code. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210221153024.453583-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge branch 'asoc-5.11' into asoc-5.12Mark Brown2021-02-051-18/+34
|\
| * ASoC: qcom: Fix typo error in HDMI regmap config callbacksSrinivasa Rao Mandadapu2021-02-021-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Had a typo in lpass platform driver that resulted in crash during suspend/resume with an HDMI dongle connected. The regmap read/write/volatile regesters validation callbacks in lpass-cpu were using MI2S rdma_channels count instead of hdmi_rdma_channels. This typo error causing to read registers from the regmap beyond the length of the mapping created by ioremap(). This fix avoids the need for reducing number hdmi_rdma_channels, which is done in commit 7dfe20ee92f6 ("ASoC: qcom: Fix number of HDMI RDMA channels on sc7180"). So reverting the same. Fixes: 7cb37b7bd0d3c ("ASoC: qcom: Add support for lpass hdmi driver") Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/20210202062727.22469-1-srivasam@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| * ASoC: qcom: lpass-cpu: Remove bit clock state checkSrinivasa Rao Mandadapu2021-01-281-14/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No need of BCLK state maintenance from driver side as clock_enable and clk_disable API's maintaing state counter. One of the major issue was spotted when Headset jack inserted while playback continues, due to same PCM device node opens twice for playaback/capture and closes once for capture and playback continues. It can resolve the errors in such scenarios. Fixes: b1824968221c ("ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state") Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210127151824.8929-1-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
| * ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARYSrinivas Kandagatla2021-01-201-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lpass hdmi support patch totally removed support for MI2S TERTIARY and QUATERNARY. One of the major issue was spotted with the design of having separate SoC specific header files for the common lpass driver. This design is prone to break as an when new SoC header is added as the common DAI ids of other SoCs will be overwritten by the new ones. Having a common header qcom,lpass.h should fix the issue and any new DAI ids should be added to the common header. With this change lpass also needs a new of_xlate function to resolve dai name. Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") Reported-by: Jun Nie <jun.nie@linaro.org> Reported-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Srinivasa Rao <srivasam@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210119171527.32145-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
* | Merge series "ASoC: qcom: Minor code cleanups for lpass-cpu" from Stephen ↵Mark Brown2021-01-151-11/+6
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Boyd <swboyd@chromium.org>: Here's some minor code cleanups for the lpass-cpu driver. I noticed that it casts away const from the driver data from DT. That's not great but fixing it is a little more involved. I'll get to it later. There's also some questionable clk_get() usage that should probably be clk_get_optional(). For now this should help a little. Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Cc: Srinivasa Rao <srivasam@codeaurora.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Stephen Boyd (4): ASoC: qcom: Remove useless debug print ASoC: qcom: Add some names to regmap configs ASoC: qcom: Stop casting away __iomem for error pointers ASoC: qcom: Remove duplicate error messages on ioremap sound/soc/qcom/lpass-cpu.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) base-commit: 5c8fe583cce542aa0b84adc939ce85293de36e5e -- https://chromeos.dev
| * ASoC: qcom: Remove duplicate error messages on ioremapStephen Boyd2021-01-151-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't need to print an error message when these ioremap operations fail. The function that returns an error already prints an error message and properly attributes it to the device. Drop them to save some code. Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Cc: Srinivasa Rao <srivasam@codeaurora.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210115034327.617223-5-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
| * ASoC: qcom: Stop casting away __iomem for error pointersStephen Boyd2021-01-151-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't need to cast away __iomem when testing with IS_ERR() or converting with PTR_ERR(). Modern sparse can handle this just fine. Drop it. Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Cc: Srinivasa Rao <srivasam@codeaurora.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210115034327.617223-4-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
| * ASoC: qcom: Add some names to regmap configsStephen Boyd2021-01-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This device can sometimes have multiple regmaps. Let's add a name so that we can differentiate in debugfs more easily. Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Cc: Srinivasa Rao <srivasam@codeaurora.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210115034327.617223-3-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
| * ASoC: qcom: Remove useless debug printStephen Boyd2021-01-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This looks like a left over debug print that tells us that HDMI is enabled. Let's remove it as that's definitely not an error to have HDMI enabled. Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Cc: Srinivasa Rao <srivasam@codeaurora.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210115034327.617223-2-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: qcom: Fix incorrect volatile registersSrinivasa Rao Mandadapu2020-12-171-18/+2
|/ | | | | | | | | | | | | | | MI2S and DMA control registers are not volatile, so remove these from volatile registers list. Registers reset state check by reading non volatile registers makes no use, so remove error check from cpu and platform trigger callbacks. Initialized map variable two times in lpass platform trigger API, so remove redundant initialization. Fixes commit b1824968221cc ("ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state") Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/1608192514-29695-2-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge branch 'for-5.10' of ↵Mark Brown2020-11-301-32/+38
|\ | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.11
| * ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid stateSrinivasa Rao Mandadapu2020-11-231-31/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix enabling BCLK and LRCLK only when LPAIF is invalid state and bit clock in enable state. In device suspend/resume scenario LPAIF is going to reset state. which is causing LRCLK disable and BCLK enable. Avoid such inconsitency by removing unnecessary cpu dai prepare API, which is doing LRCLK enable, and by maintaining BLCK state information. Fixes: 7e6799d8f87d ("ASoC: qcom: lpass-cpu: Enable MI2S BCLK and LRCLK together") Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/1606148273-17325-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
| * ASoC: qcom: lpass-cpu: Fix clock disable failureV Sujith Kumar Reddy2020-10-291-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable MI2S bit clock from PAUSE/STOP/SUSPEND usecase instead of shutdown time. Acheive this by invoking clk_disable API from cpu daiops trigger instead of cpu daiops shutdown. Change non-atomic API "clk_prepare_enable" to atomic API "clk_enable" in trigger, as trigger is being called from atomic context. Fixes: 7e6799d8f87d ("ASoC: qcom: lpass-cpu: Enable MI2S BCLK and LRCLK together") Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/1603098363-9251-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: qcom: sc7180: Register shutdown handler for lpass platformV Sujith Kumar Reddy2020-11-161-0/+10
| | | | | | | | | | | | | | | | | | | | Register shutdown handler to stop sc7180 lpass platform driver and to disable audio clocks. Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/1605292702-25046-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: qcom: lpass-cpu: fix warning on symbol scopeSrinivas Kandagatla2020-11-051-1/+1
|/ | | | | | | | | | | | This patch fixes below warning when module is compiled with W=1 C=1 lpass-cpu.c:677:22: warning: symbol 'lpass_hdmi_regmap_config' was not declared. Should it be static? Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201105114100.18647-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: Add support for lpass hdmi driverV Sujith Kumar Reddy2020-10-081-6/+241
| | | | | | | | | | | | Upadate lpass cpu and platform driver to support audio over dp. Also add lpass-hdmi.c and lpass-hdmi.h. Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1602134223-2562-6-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* Asoc:qcom:lpass-cpu:Update dts property read APIV Sujith Kumar Reddy2020-10-081-1/+1
| | | | | | | | | | | | | | Update dts property read API call with platform get property by name, as it make code more readable and avoid conflicts when array of properties to be used. Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1602134223-2562-4-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: lpass-cpu: Enable MI2S BCLK and LRCLK togetherV Sujith Kumar Reddy2020-09-251-8/+8
| | | | | | | | | | | Update lpass-cpu.c to enable I2S BCLK and LRCLK together. Remove BCLK enable in lpass_cpu_daiops_startup and add in lpass_cpu_daiops_trigger API. Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/1600448073-6709-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: lpass-cpu: Use platform_get_resourceRohit kumar2020-08-171-1/+1
| | | | | | | | | | | platform_get_resource_byname() is used when there is list of reg entries. As lpass-cpu node has only one reg entry, use platform_get_resource() instead. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1597402388-14112-11-git-send-email-rohitkr@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: lpass-cpu: fix concurrency issueRohit kumar2020-08-171-16/+0
| | | | | | | | | | | | | | i2sctl register value is set to 0 during hw_free(). This impacts any ongoing concurrent session on the same i2s port. As trigger() stop already resets enable bit to 0, there is no need of explicit hw_free. Removing it to fix the issue. Fixes: 80beab8e1d86 ("ASoC: qcom: Add LPASS CPU DAI driver") Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1597402388-14112-7-git-send-email-rohitkr@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registersRohit kumar2020-08-171-49/+107
| | | | | | | | | | | I2SCTL and DMACTL registers has different bits alignment for newer LPASS variants of SC7180 soc. Use REG_FIELD_ID() to define the reg_fields in platform specific file and removed shifts and mask macros for such registers from header file. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Link: https://lore.kernel.org/r/1597402388-14112-6-git-send-email-rohitkr@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific functionRohit kumar2020-08-171-30/+10
| | | | | | | | | | Ahbix clock is optional clock and not needed for all platforms. Move it to lpass-apq8016/ipq806x as it is not needed for sc7180. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1597402388-14112-3-git-send-email-rohitkr@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: lpass-cpu: Make I2S SD lines configurableStephan Gerhold2020-05-051-46/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: Use the defined variable to simplify codeTang Bin2020-05-041-21/+18
| | | | | | | | | Use the defined variable "dev" to make the code cleaner. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200504065947.12172-1-tangbin@cmss.chinamobile.com Signed-off-by: Mark Brown <broonie@kernel.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner2019-06-051-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: qcom: move clock names into LPASS variant structLinus Walleij2017-04-211-15/+7
| | | | | | | | | | | | | | | The clock names for the two supported codecs are either "mi2s-*" name variants generated by code. This naming scheme does not work for platforms like MSM8660 which has I2S channels named CODEC_I2S_SPKR (rather than just "MI2S tertiary" and other repetitive names) and consequently have clocks named "codec-i2s-spkr-osr-clk" and similar. Skip the runtime generation of clock names and replace it with name lookup tables encoded into the variant data. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: Drop __func__ usage from log printsBjorn Andersson2017-01-311-50/+36
| | | | | | | | | | The combination of dev_err() and __func__ make most of these log prints over 100 chars long. Remove the usage of __func__ to clean the kernel log and as the usage is not necessary to identify the individual log prints. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: lpass-cpu: Remove unnecessary clock checksBjorn Andersson2017-01-311-17/+10
| | | | | | | | | | | | Clean up the clock calling code by removing numerous IS_ERR() checks by just assigning the clock NULL; as this turn all used functions in the clk API to nops. Also include the word "optional" in the error message when failing to acquire the optional osr clocks. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: lpass-cpu: add module licence and descriptionSrinivas Kandagatla2016-10-311-0/+3
| | | | | | | | | | | | | | | This patch adds module licence to lpass-cpu driver, without this patch lpass-cpu module would taint with below error: snd_soc_lpass_cpu: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint snd_soc_lpass_cpu: Unknown symbol regmap_write (err 0) snd_soc_lpass_cpu: Unknown symbol devm_kmalloc (err 0) ... Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: add mic supportSrinivas Kandagatla2016-02-191-30/+83
| | | | | | | | | | This patch adds mic support to the lpass driver, most of the driver is reused as it is, only the register level access is changed depending on te direction of the stream. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: apq8016: set the correct max register for regmapSrinivas Kandagatla2016-02-191-2/+31
| | | | | | | | | Now that we are ready to access wrdma registers, set the max register and other regmap related configs to use correct values. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: Don't specify LE device endiannessStephen Boyd2016-02-121-1/+0
| | | | | | | | | | | | | | | | This reverts commit 18560a4e3 (ASoC: qcom: Specify LE device endianness). The commit that caused us to specify LE device endianness here, 29bb45f25ff3 (regmap-mmio: Use native endianness for read/write, 2015-10-29), has been reverted in mainline so now when we specify LE it actively breaks big endian kernels because the byte swapping in regmap-mmio is incorrect. Let's revert this change because it will 1) fix the big endian kernels and 2) be redundant to specify LE because that will become the default soon. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: Specify LE device endiannessStephen Boyd2015-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This is a little endian device, but so far we've been relying on the regmap mmio bus handling this for us without explicitly stating that fact. After commit 4a98da2164cf (regmap-mmio: Use native endianness for read/write, 2015-10-29), the regmap mmio bus will read/write with the __raw_*() IO accessors, instead of using the readl/writel() APIs that do proper byte swapping for little endian devices. So if we're running on a big endian processor and haven't specified the endianness explicitly in the regmap config or in DT, we're going to switch from doing little endian byte swapping to big endian accesses without byte swapping, leading to some confusing results. Specify the endianness explicitly so that the regmap core properly byte swaps the accesses for us. Cc: Kenneth Westfield <kwestfie@codeaurora.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Tyler Baker <tyler.baker@linaro.org> Cc: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: change PTR_ERR argumentJulia Lawall2015-09-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Apply PTR_ERR to the value that was recently assigned. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y; @@ if (IS_ERR(x) || ...) { ... when any when != IS_ERR(...) ( PTR_ERR(x) | * PTR_ERR(y) ) ... when any } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_opsAxel Lin2015-08-281-1/+1
| | | | | | | | asoc_qcom_lpass_cpu_dai_ops is exported and used by multiple drivers, make it const to prevent modifying it at run time. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'asoc/topic/max98095', 'asoc/topic/omap', ↵Mark Brown2015-06-051-113/+127
|\ \ | | | | | | | | | 'asoc/topic/pxa', 'asoc/topic/qcom' and 'asoc/topic/rcar' into asoc-next
| | * ASoC: qcom: make osr clock optionalSrinivas Kandagatla2015-05-221-9/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some LPASS integrations like on APQ8016 do not have OSR clk, so making osr clk optional would allow such integrations to use lpass driver. Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Acked-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: qcom: support bitclk and osrclk per i2s portSrinivas Kandagatla2015-05-221-20/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support to allow bitclk and osrclk per i2s dai port. on APQ8016 there are 4 i2s ports each one has its own bit clks. Without this patch its not possible to support multiple i2s ports in the lpass driver. Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Acked-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: qcom: remove hardcoded i2s port numberSrinivas Kandagatla2015-05-211-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch attempts to remove the hardcoded i2s port number in lpass driver. Now the the port number comes from the dai id field. This will allow other SOCs to use different port numbers on the lpass driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Acked-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: qcom: move ipq806x specific bits out of lpass driver.Srinivas Kandagatla2015-05-211-81/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch tries to make the lpass driver more generic by moving the ipq806x specific bits out of the cpu and platform driver, also allows the SOC specific drivers to add the correct register offsets. This patch also renames the register definition header file into more generic header file. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Acked-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * ASoC: qcom: remove unnecessary header filesSrinivas Kandagatla2015-05-041-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes unnecessary header files in lpass cpu and platform code. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 10:28:08 +0100