summaryrefslogtreecommitdiffstats
path: root/sound/soc (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: max9867: Fix power managementLadislav Michl2018-12-072-28/+46
| | | | | | | | Implement set_bias_level to drive shutdown bit, so device is put to sleep when unused. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: max9867: Remove useless assignmentLadislav Michl2018-12-071-4/+2
| | | | | | | ret is assigned later, no need to initialize it. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codecs: ak4104: move to GPIO consumer APIDaniel Mack2018-12-061-15/+7
| | | | | | | | Get the reset GPIO through the GPIO consumer API. This allows specifying the DT property as "reset-gpios" without breaking existing DT users. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codecs: cs4270: move to GPIO consumer APIDaniel Mack2018-12-061-16/+7
| | | | | | | | Get the reset GPIO through the GPIO consumer API. This allows specifying the DT property as "reset-gpios" without breaking existing DT users. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Use of_node_name_eq for node name comparisonsRob Herring2018-12-062-4/+4
| | | | | | | | | | | | | | | | | | | | | | Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For the FSL ASoC card, the full node names appear to be "ssi", "esai", and "sai", so there's not any reason to use strstr and of_node_name_eq can be used instead. Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: use dma_ops of parent device for acp_audio_dmaYu Zhao2018-12-061-2/+5
| | | | | | | | | | | | | | | | | | | | | | | AMD platform device acp_audio_dma can only be created by parent PCI device driver (drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c). Pass struct device of the parent to snd_pcm_lib_preallocate_pages() so dma_alloc_coherent() can use correct dma_ops. Otherwise, it will use default dma_ops which is nommu_dma_ops on x86_64 even when IOMMU is enabled and set to non passthrough mode. Though platform device inherits some dma related fields during its creation in mfd_add_device(), we can't simply pass its struct device to snd_pcm_lib_preallocate_pages() because dma_ops is not among the inherited fields. Even it were, drivers/iommu/amd_iommu.c would ignore it because get_device_id() doesn't handle platform device. This change shouldn't give us any trouble even struct device of the parent becomes null or represents some non PCI device in the future, because get_dma_ops() correctly handles null struct device or uses the default dma_ops if struct device doesn't have it set. Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: use DMA addr rather than CPU pa for acp_audio_dmaYu Zhao2018-12-062-11/+6
| | | | | | | | | | | | We shouldn't assume CPU physical address we get from page_to_phys() is same as DMA address we get from dma_alloc_coherent(). On x86_64, we won't run into any problem with the assumption when dma_ops is nommu_dma_ops. However, DMA address is IOVA when IOMMU is enabled. And it's most likely different from CPU physical address when AMD IOMMU is not in passthrough mode. Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: max98373: Added max98373_reset for stable amp resetRyan Lee2018-12-041-6/+29
| | | | | | | | | | This patch added max98373_reset function to avoid amp software reset failure and code duplication. Reset verification step has been added for stable amp reset and it repeats verification maximum 3 times when it is failed. Chip revision ID is available when the amp is in the idle state which means software reset is completed well. Additional 10ms delay was added for every retrial and maximum 30ms delay can be applied. Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: audio-graph-card: use cpu/codec pointer on graph_dai_propsKuninori Morimoto2018-12-041-23/+34
| | | | | | | | | | | | | | | | In DPCM case, it uses CPU-dummy / dummy-Codec dai links, and non DPCM case, it uses CPU-Codec dai links. Now, we want to merge audio-graph-card and audio-graph-scu-card. These sound cards are using silimar but not same logic on each functions. Then, of course we want to share same logic. To compromise, this patch uses cpu/codec pointer on audio-graph-card. It is same logic with audio-graph-scu-card, thus easy merging. This is prepare for merging audio card Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: audio-graph-scu-card: care multi DPCM codec_confKuninori Morimoto2018-12-041-11/+29
| | | | | | | | Current audio-graph-scu-card didn't care about codec_conf for multi DPCM case. This patch cares it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: audio-graph-scu-card: use cpu/codec pointer on graph_dai_propsKuninori Morimoto2018-12-041-23/+49
| | | | | | | | | | | | | | | | In DPCM case, it uses CPU-dummy / dummy-Codec dai links, and non DPCM case, it uses CPU-Codec dai links. Now, we want to merge audio-graph-card and audio-graph-scu-card. These sound cards are using silimar but not same logic on each functions. Then, of course we want to share same logic. To compromise, this patch uses cpu/codec pointer on audio-graph-scu-card. It is same logic with audio-graph-card, thus easy merging. This is prepare for merging audio card Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: audio-graph-scu-card: care link / dai countKuninori Morimoto2018-12-041-14/+62
| | | | | | | | | | | | In DPCM case, it uses CPU-dummy / dummy-Codec dai links. If sound card is caring only DPCM, link count = dai count, but, if non DPCM case, link count != dai count. Now, we want to merge audio-graph-card and audio-graph-scu-card, then, we need to care both link / dai count more carefly This patch cares it, and prepare for merging audio card Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: simple-card-utils: fixup asoc_simple_card_get_dai_id() countingKuninori Morimoto2018-12-041-19/+3
| | | | | | | | | | | | asoc_simple_card_get_dai_id() returns DAI ID, but it is based on DT node's "endpoint" position. Almost all cases 1 port has 1 endpoint, thus, it was no problem. But in reality, port : endpoint = 1 : N, thus, counting endpoint is BUG, it should based on "port" ID. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rsnd: add missing TDM Split mode support for simple-cardKuninori Morimoto2018-12-041-2/+51
| | | | | | | | | | | | commit f69f452243e4e1 ("ASoC: rsnd: add TDM Split mode support") added TDM Split mode support for rsnd driver. But, it cares audio-graph-card style only. We can't use TDM Split mode on simple-card style now. This patch fixup this issue. Fixes: f69f452243e4e1 ("ASoC: rsnd: add TDM Split mode support") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rsnd: fixup mod ID for CTU regmap read/writeKuninori Morimoto2018-12-043-3/+13
| | | | | | | | | | | | | | | commit c16015f36cc12824 ("ASoC: rsnd: add .get_id/.get_id_sub") add new .get_id/.get_id_sub to indicate module ID/subID. It is used for SSIU and CTU. In SSIU case, subID indicates BUSIF, but register settings is based on SSIU ID. OTOH, in CTU case, subID indicates CTU channel, and register settings is based on it. This means regmap read/write function needs to care it. This patch fixup this issue. It can't play MIXed sound without this patch. Fixes: c16015f36cc12824 ("ASoC: rsnd: add .get_id/.get_id_sub") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rsnd: indicates Channel and Mode for debugKuninori Morimoto2018-12-041-1/+9
| | | | | | | | For TDM debug purpose, indicating Channel and Mode is very useful. This patch indicate it if it has #define DEBUG Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: pxa: remove raumfeld machine driverDaniel Mack2018-12-033-329/+0
| | | | | | | | | These boards are now fully ported to devicetree and make use of the simple-card driver, so the platform specific machine driver can be removed. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: common: add ACPI matching tables for ICLPierre-Louis Bossart2018-12-032-1/+33
| | | | | | | Entry needed for ICL RVP w/ RT274 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: au8540: use 64-bit arithmetic instead of 32-bitYoung_X2018-11-291-1/+1
| | | | | | | | | | | | | | Add suffix ULL to constant 256 in order to give the compiler complete information about the proper arithmetic to use. Notice that such constant is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: 256 * fs * 2 * mclk_src_scaling[i].param Signed-off-by: Young_X <YangX92@hotmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: dmic: introduce module_param wakeup_delayJenny TC2018-11-281-0/+5
| | | | | | | | | | Introducing a module param for wakeup_delay in order to align with modeswitch_delay parameter. With this change, both wakeup_delay and modeswitch_delay parameters can be passed as module parameters. Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: dmic: introduce mode switch delayJenny TC2018-11-281-0/+35
| | | | | | | | | | | | | | | | | | | | | On startup, applications such as PulseAudio or CRAS enable playback or capture on all PCM devices to verify that configurations are correct, and close them immediately. For DMICs, this can result in the clock being turned off very quickly, which may not compatible with internal state machine transition requirements. This patch add a mode-switch delay which will prevent the clock from being turned off without complying with manufacturer timing specifications. While the DMIC clock may be controlled at a lower level, be it with hardware or firmware, applying the delay during the STOP_TRIGGER phase ensures that there is no race condition, e.g. with the hardware/firmware turning off the clock earlier Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Jairaj Arava <jairaj.arava@intel.com> Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: sdm845: Create and setup jack in init callbackCheng-Yi Chiang2018-11-281-2/+55
| | | | | | | | | Add a callback for init ops on dai_link to create and setup jack. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: qcom: sdm845: Add board specific dapm widgetsCheng-Yi Chiang2018-11-281-0/+10
| | | | | | | | | | Add board specific dapm widgets so these widgets can be used in the route. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: davinci-mcasp: Implement configurable dismod handlingPeter Ujfalusi2018-11-282-1/+19
| | | | | | | | | | | If the dismod is specified in the DT node, use the specified custom value to configure the drive on state of the inactive TX slots. If the dismod is not present or booted in legacy mode, the dismod is set to low as it was the original behavior. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: davinci-mcasp: Update PDIR (pin direction) register handlingPeter Ujfalusi2018-11-282-32/+85
| | | | | | | | | | | | | | | | | | | | | | | | | When McASP is master and the PDIR for the clock pins are configured as outputs before the clocking is configured it will output whatever clock is generated at the moment internally. The clock will switch to the correct rate only when the we start the clock generators. To avoid this we must only set the pin as output after the clock is configured and enabled. AXR pins configured as outputs behaves somehow interesting as well: when McASP is not enabled and the pin is selected as output it will not honor the DISMOD settings for the inactive state, but will pull the pin down. Add a new bitfield and mark the pins there which needs to be output and set the pins only at the time when they will behave correctly. On stream stop configure the pins back to input which makes them to obey the global pin configuration regarding to pull up/down. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: davinci-mcasp: Clear TXSTAT register before activating serializersPeter Ujfalusi2018-11-281-0/+2
| | | | | | | | | | | Follow the guideline from the TRM: Before starting, clear the respective transmitter and receiver status registers To avoid stale state stored in the status registers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: Skylake: Add FW reply for MCLK/SCLK IPCSubhransu S. Prusty2018-11-281-0/+6
| | | | | | | | | | If mclk/sclk is already running, FW responds with IPC reply MCLK/SCLK already running. Add these to the IPC reply lookup table. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: Skylake: Make DSP replies more human readableSubhransu S. Prusty2018-11-281-11/+33
| | | | | | | | | | | Add more meaning to the IPC replies for easy debugging. Replace the switch case with a lookup table to lookup for the IPC replies and print in human readable form. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: max9867: Fix whitespaceLadislav Michl2018-11-261-7/+5
| | | | | | | Minor changes to match coding style. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: amd: Fix a NULL vs IS_ERR() check in probeDan Carpenter2018-11-261-2/+2
| | | | | | | | | The platform_device_register_full() function doesn't return NULL, it returns error pointers. Fixes: 7894a7e7ea3d ("ASoC: amd: create ACP3x PCM platform device") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: audio-graph-card: tidyup define positionKuninori Morimoto2018-11-231-5/+5
| | | | | | | | | | commit f986907c9225 ("ASoC: audio-graph-card: add widgets and routing for external amplifier support") added new function asoc_graph_card_outdrv_event(), but the inserted position breaks define area. This patch tidyup it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: audio-graph-card: tidyup typo SND_AUDIO_GRAPH_CARDKuninori Morimoto2018-11-231-1/+1
| | | | | | | 1 "simple" is enough on Kconfig help Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: audio-graph-scu-card: tidyup asoc_simple_card_parse_daifmt() timingKuninori Morimoto2018-11-231-38/+16
| | | | | | | | | | | | Current audio-graph-scu-card driver is parsing codec position for DPCM and consider DAI format. But, current operation is doing totally pointless, because 1) asoc_simple_card_parse_daifmt() will be called not only for 1st codec on current implementation, and it will be used as fixed format 2) it should be called for each CPU/Codec pair. Let's tidyup asoc_simple_card_parse_daifmt() timing. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: audio-graph-scu-card: tidyup "convert-rate/channels" parsingKuninori Morimoto2018-11-231-0/+7
| | | | | | | | | | | | | | | | audio-graph-scu-card.c is supporting "convert-rate/channels" which is used for DPCM. But, sound card might have multi codecs, and each codec might need each convert-rate/channels. This patch supports each codec's convert-rate/channles support. top node convert-rate/channels will overwrite settings if exist. It can't support each codec's convert-rate/channels if sound card had multi codecs without this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: audio-graph-scu-card: tidyup "prefix" parsingKuninori Morimoto2018-11-231-0/+10
| | | | | | | | | | | | | | | | audio-graph-scu-card.c is supporting "prefix" which is used to avoid DAI naming conflict when CPU/Codec matching. But, sound card might have multi sub-devices, and each codec might need each prefix. Now, ASoC is supporting snd_soc_of_parse_node_prefix(), let's support it on audio-graph-scu-card, too. It is keeping existing DT style. It can't support each codec's prefix if sound card had multi sub-devices without this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: simple-scu-card: tidyup "prefix" parsingKuninori Morimoto2018-11-231-0/+7
| | | | | | | | | | | | | | | | simple-scu-card.c is supporting "prefix" which is used to avoid DAI naming conflict when CPU/Codec matching. But, sound card might have multi sub-devices, and each codec might need each prefix. Now, ASoC is supporting snd_soc_of_parse_node_prefix(), let's support it on audio-graph-scu-card, too. It is keeping existing DT style. It can't support each codec's prefix if sound card had multi sub-devices without this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: soc-core: add snd_soc_of_parse_node_prefix()Kuninori Morimoto2018-11-231-6/+5
| | | | | | | | | | | | | | | | | Current ASoC has snd_soc_of_parse_audio_prefix() to get codec_conf settings from DT which is used to avoid DAI naming conflict when CPU/Codec matching. Currently, it is parsing from "top node", but, we want to parse from "each sub node" if sound card had multi cpus/codecs. This patch adds new snd_soc_of_parse_node_prefix() to allow parsing settings from selected node. It is keeping existing snd_soc_of_parse_audio_prefix() by using macro. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: simple-amplifier: add VCC regulator widgetVasily Khoruzhick2018-11-231-0/+4
| | | | | | | | | | Amplifier may have assosicated regulator, so add a widget for it and appropriate route. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: sunxi: sun50i-codec-analog: Add support for cpvdd regulator supplyChen-Yu Tsai2018-11-231-0/+2
| | | | | | | | | | | | | On the Allwinner A64 SoCs, the audio codec has a built-in headphone amplifier. This amplifier has a power supply separate from the rest of the analog audio circuitry, labeled cpvdd. This patch adds a DAPM widget for this supply, and ties it to the headphone amp widget. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: simple_card_utils: remove "option" from ↵Kuninori Morimoto2018-11-215-11/+7
| | | | | | | | | | | asoc_simple_card_of_parse_routing() asoc_simple_card_of_parse_routing() had "option" parameter to consider error handling, but it is very pointless parameter. Let's remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: simple-card-utils: tidyup asoc_simple_card_parse_convert()Kuninori Morimoto2018-11-213-4/+5
| | | | | | | | | | | | | Current simple-card-utils has asoc_simple_card_parse_convert() to parse convert channel/rate for be_hw_params_fixup. But, it is parsing from top of node. If sound card had multi subnode, we need to parse it from each sub node. This patch tidyup asoc_simple_card_parse_convert() to allow parsing settings from each node. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: simple-card-utils: accept NULL parameter on asoc_simple_card_xxx()Kuninori Morimoto2018-11-211-2/+9
| | | | | | | | | If simple-card-utils accept NULL pointer on asoc_simple_card_xxx(), each driver code will be more simple. Let's accept NULL pointer. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: simple-card-utils: remove asoc_simple_card_clk_register()Kuninori Morimoto2018-11-211-7/+1
| | | | | | | | asoc_simple_card_clk_register() is used but only 1 user, and very pointless code. Let's remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rsnd: makes rsnd_ssi_is_dma_mode() staticKuninori Morimoto2018-11-212-3/+3
| | | | | | | | ssi.c only is using rsnd_ssi_is_dma_mode(). Let's move it as static function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rsnd: tidyup rsnd_parse_connect_ssiu_compatible()Kuninori Morimoto2018-11-211-2/+4
| | | | | | | | | | rsnd_parse_connect_ssiu_compatible() is doing - using rsnd_ssiu_id(), but we use it via rsnd_mod_id() - we can break loop if rsnd_dai_connect() was called This patch fixup these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: sdm845: Add support for Secondary MI2S interfaceRohit kumar2018-11-211-0/+18
| | | | | | | | | Add support to configure bit clock for secondary MI2S TX interface. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: sdm845: Update slot_width for Quaternary TDM portRohit kumar2018-11-211-4/+5
| | | | | | | | | | Change slot_width for quaternary TDM port to 16 and update bclk rate for TDM and MI2S interfaces accordingly. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: use platform_data for machine driversPierre-Louis Bossart2018-11-206-8/+15
| | | | | | | | | For some reason we have different mechanisms for passing data to machine drivers. Use the solution used by Atom/SST and SOF instead of using drv_data as done by Skylake. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: fix interface for Chromebook machine driversPierre-Louis Bossart2018-11-206-24/+21
| | | | | | | | | | | | | | | | The changes for HDaudio overlooked the fact that the machine drivers used for Chromebooks rely on the dmic number information passed as pdata. Add dmic_num field to standard interface and use standard interface instead of SKL-specific one. Also clean-up pdata definition to remove fields that are no longer used. Fixes: 842bb5135f10 ('ASoC: Intel: use standard interface for Hdaudio machine driver') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: tlv320aic3x: Add support for CBM_CFS and CBS_CFM clocking modesPeter Ujfalusi2018-11-201-0/+10
| | | | | | | The codec can support any variation of bclk/fs master/slave configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-06 04:55:26 +0100