summaryrefslogtreecommitdiffstats
path: root/sound/usb/endpoint.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: usb-audio: remove redundant pointer 'urb'Colin Ian King2018-08-011-2/+0
| | | | | | | | | | | Pointer 'urb' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'urb' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: test EP_FLAG_RUNNING at urb completionIoan-Adrian Ratiu2017-01-051-0/+3
| | | | | | | | | | Testing EP_FLAG_RUNNING in snd_complete_urb() before running the completion logic allows us to save a few cpu cycles by returning early, skipping the pending urb in case the stream was stopped; the stop logic handles the urb and sets the completion callbacks to NULL. Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix irq/process data synchronizationIoan-Adrian Ratiu2017-01-051-10/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 16200948d83 ("ALSA: usb-audio: Fix race at stopping the stream") was incomplete causing another more severe kernel panic, so it got reverted. This fixes both the original problem and its fallout kernel race/crash. The original fix is to move the endpoint member NULL clearing logic inside wait_clear_urbs() so the irq triggering the urb completion doesn't call retire_capture/playback_urb() after the NULL clearing and generate a panic. However this creates a new race between snd_usb_endpoint_start()'s call to wait_clear_urbs() and the irq urb completion handler which again calls retire_capture/playback_urb() leading to a new NULL dereference. We keep the EP deactivation code in snd_usb_endpoint_start() because removing it will break the EP reference counting (see [1] [2] for info), however we don't need the "can_sleep" mechanism anymore because a new function was introduced (snd_usb_endpoint_sync_pending_stop()) which synchronizes pending stops and gets called inside the pcm prepare callback. It also makes sense to remove can_sleep because it was also removed from deactivate_urbs() signature in [3] so we benefit from more simplification. [1] commit 015618b90 ("ALSA: snd-usb: Fix URB cancellation at stream start") [2] commit e9ba389c5 ("ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream") [3] commit ccc1696d5 ("ALSA: usb-audio: simplify endpoint deactivation code") Fixes: f8114f8583bb ("Revert "ALSA: usb-audio: Fix race at stopping the stream"") Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Revert "ALSA: usb-audio: Fix race at stopping the stream"Takashi Iwai2016-12-211-8/+4
| | | | | | | | | | | | | | | | | | This reverts commit 16200948d8353fe29a473a394d7d26790deae0e7. The commit was intended to cover the race condition, but it introduced yet another regression for devices with the implicit feedback, leading to a kernel panic due to NULL-dereference in an irq context. As the race condition that was addressed by the commit is very rare and the regression is much worse, let's revert the commit for rc1, and fix the issue properly in a later patch. Fixes: 16200948d835 ("ALSA: usb-audio: Fix race at stopping the stream") Reported-by: Ioan-Adrian Ratiu <adi@adirat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ALSA: usb-audio: Eliminate noise at the start of DSD playback.Nobutaka Okabe2016-12-121-1/+15
| | | | | | | | | | | | | | | | | | | | | | | [Problem] In some USB DACs, a terrible pop noise comes to be heard at the start of DSD playback (in the following situations). - play first DSD track - change from PCM track to DSD track - change from DSD64 track to DSD128 track (and etc...) - seek DSD track - Fast-Forward/Rewind DSD track [Cause] At the start of playback, there is a little silence. The silence bit pattern "0x69" is required on DSD mode, but it is not like that. [Solution] This patch adds DSD silence pattern to the endpoint settings. Signed-off-by: Nobutaka Okabe <nob77413@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'for-linus' into for-nextTakashi Iwai2016-12-091-4/+8
|\
| * ALSA: usb-audio: Fix race at stopping the streamTakashi Iwai2016-12-051-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've got a kernel crash report showing like: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = a1d7c000 [00000008] *pgd=31c93831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM CPU: 0 PID: 250 Comm: dbus-daemon Not tainted 3.14.51-03479-gf50bdf4 #1 task: a3ae61c0 ti: a08c8000 task.ti: a08c8000 PC is at retire_capture_urb+0x10/0x1f4 [snd_usb_audio] LR is at snd_complete_urb+0x140/0x1f0 [snd_usb_audio] pc : [<7f0eb22c>] lr : [<7f0e57fc>] psr: 200e0193 sp : a08c9c98 ip : a08c9ce8 fp : a08c9ce4 r10: 0000000a r9 : 00000102 r8 : 94cb3000 r7 : 94cb3000 r6 : 94d0f000 r5 : 94d0e8e8 r4 : 94d0e000 r3 : 7f0eb21c r2 : 00000000 r1 : 94cb3000 r0 : 00000000 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 31d7c04a DAC: 00000015 Process dbus-daemon (pid: 250, stack limit = 0xa08c8238) Stack: (0xa08c9c98 to 0xa08ca000) ... Backtrace: [<7f0eb21c>] (retire_capture_urb [snd_usb_audio]) from [<7f0e57fc>] (snd_complete_urb+0x140/0x1f0 [snd_usb_audio]) [<7f0e56bc>] (snd_complete_urb [snd_usb_audio]) from [<80371118>] (__usb_hcd_giveback_urb+0x78/0xf4) [<803710a0>] (__usb_hcd_giveback_urb) from [<80371514>] (usb_giveback_urb_bh+0x8c/0xc0) [<80371488>] (usb_giveback_urb_bh) from [<80028e3c>] (tasklet_hi_action+0xc4/0x148) [<80028d78>] (tasklet_hi_action) from [<80028358>] (__do_softirq+0x190/0x380) [<800281c8>] (__do_softirq) from [<80028858>] (irq_exit+0x8c/0xfc) [<800287cc>] (irq_exit) from [<8000ea88>] (handle_IRQ+0x8c/0xc8) [<8000e9fc>] (handle_IRQ) from [<800085e8>] (gic_handle_irq+0xbc/0xf8) [<8000852c>] (gic_handle_irq) from [<80509044>] (__irq_svc+0x44/0x78) [<80508820>] (_raw_spin_unlock_irq) from [<8004b880>] (finish_task_switch+0x5c/0x100) [<8004b824>] (finish_task_switch) from [<805052f0>] (__schedule+0x48c/0x6d8) [<80504e64>] (__schedule) from [<805055d4>] (schedule+0x98/0x9c) [<8050553c>] (schedule) from [<800116c8>] (do_work_pending+0x30/0xd0) [<80011698>] (do_work_pending) from [<8000e160>] (work_pending+0xc/0x20) Code: e1a0c00d e92ddff0 e24cb004 e24dd024 (e5902008) Kernel panic - not syncing: Fatal exception in interrupt There is a race between retire_capture_urb() and stop_endpoints(). The latter is called at stopping the stream and it sets some endpoint fields to NULL. But its call is asynchronous, thus the pending complete callback might get called after these NULL clears, and it leads the NULL dereference like the above. The fix is to move the NULL clearance after the synchronization, i.e. wait_clear_urbs(). This is called at prepare and hw_free callbacks, so it's assured to be called before the restart of the stream or the release of the stream. Also, while we're at it, put the EP_FLAG_RUNNING flag check at the beginning of snd_complete_urb() to skip the pending complete after the stream is stopped. Fixes: b2eb950de2f0 ("ALSA: usb-audio: stop both data and sync...") Reported-by: Jiada Wang <jiada_wang@mentor.com> Reported-by: Mark Craske <Mark_Craske@mentor.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: usb-audio: more tolerant packetsizeAndreas Pape2016-12-061-2/+2
|/ | | | | | | | | | | | | | | | | since commit 57e6dae1087b ("ALSA: usb-audio: do not trust too-big wMaxPacketSize values"), the expected packetsize is always limited to nominal + 25%. It was discovered, that some devices (Android audio accessory) have a much higher jitter in used packetsizes than 25% which would result in BABBLE condition and dropping of packets. A better solution is so assume the jitter to be the nominal packetsize: -one nearly empty packet followed by a almost 150% sized one. V2: changed to assume max frequency is +50 of nominal packetsize. Signed-off-by: Andreas Pape <apape@de.adit-jv.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb: fine-tune Tenor error compensation valueDaniel Mack2016-08-221-2/+2
| | | | | | | | | | | | | | | | Users of devices affected by the Tenor feedback data error report buffer underruns, even with the +/- 0x1.0000 quirk applied. Compensating the error with 0xf000 instead seems to reliably fix that issue. See https://sourceforge.net/p/alsa/mailman/message/35230259/ Reported-and-tested-by: Norman Nolte <norman.nolte@gmx.net> Reported-and-tested-by: Thomas Gresens <T.Gresens@intershop.de> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb: use TEAC UD-H01 quirk for more devicesDaniel Mack2016-08-221-2/+3
| | | | | | | | | | | | | The quirk seems to be necessary not only for TEAC UD-H01 devices, but to more that are based on the Tenor 8802TL chipset. Devices built by T+A are affected too, and they apparently all use the same USB PID:PID. Extend the quirky handling for that device as well, and rename the quirks flag. Reported-and-tested-by: Thomas Gresens <T.Gresens@intershop.de> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb: move udh01_fb_quirk setting to quirks.cDaniel Mack2016-08-221-4/+0
| | | | | | | | That's a quirk, after all, so move it where to all the other quirks live. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Add sanity checks for endpoint accessesTakashi Iwai2016-03-161-0/+3
| | | | | | | | | | | | Add some sanity check codes before actually accessing the endpoint via get_endpoint() in order to avoid the invalid access through a malformed USB descriptor. Mostly just checking bNumEndpoints, but in one place (snd_microii_spdif_default_get()), the validity of iface and altsetting index is checked as well. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=971125 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: USB-audio: Adjust max packet size calculation for tx_length_quirkRicard Wanderlof2015-10-191-2/+10
| | | | | | | | | | | | | | | | For the Zoom R16/24 (tx_length_quirk set), when calculating the maximum sample frequency, consideration must be made for the fact that four bytes of the packet contain a length descriptor and consequently must not be counted as part of the audio data. This is corroborated by the wMaxPacketSize for this device, which is 108 bytes according for the USB playback endpoint descriptor. The frame size is 8 bytes (2 channels of 4 bytes each), and the 108 bytes thus work out as 13 * 8 + 4, i.e. corresponding to 13 frames plus the additional 4 byte length descriptor. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: USB-audio: Add quirk for Zoom R16/24 playbackRicard Wanderlof2015-10-191-5/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Zoom R16/24 have a nonstandard playback format where each isochronous packet contains a length descriptor in the first four bytes. (Curiously, capture data does not contain this and requires no quirk.) The quirk involves adding the extra length descriptor whenever outgoing isochronous packets are generated, both in pcm.c (outgoing audio) and endpoint.c (silent data). In order to make the quirk as unintrusive as possible, for pcm.c:prepare_playback_urb(), the isochronous packet descriptors are initially set up in the same way no matter if the quirk is enabled or not. Once it is time to actually copy the data into the outgoing packet buffer (together with the added length descriptors) the isochronous descriptors are adjusted in order take the increased payload length into account. For endpoint.c:prepare_silent_urb() it makes more sense to modify the actual function, partly because the function is less complex to start with and partly because it is not as time-critical as prepare_playback_urb() (whose bulk is run with interrupts disabled), so the (minute) additional time spent in the non-quirk case is motivated by the simplicity of having a single function for all cases. The quirk is controlled by the new tx_length_quirk member in struct snd_usb_substream and struct snd_usb_audio, which is conveyed to pcm.c and endpoint.c from quirks.c in a similar manner to the txfr_quirk member in the same structs. In contrast to txfr_quirk however, the quirk is enabled directly in quirks.c:create_standard_audio_quirk() by checking the USB ID in that function. Another option would be to introduce a new QUIRK_AUDIO_ZOOM_INTERFACE or somesuch, which would have made the quirk very plain to see in the quirk table, but it was felt that the additional code needed to implement it this way would just make the implementation more complex with no real gain. Tested with a Zoom R16, both by doing capture and playback separately using arecord and aplay (8 channel capture and 2 channel playback, respectively), as well as capture and playback together using Ardour, as well as Audacity and Qtractor together with jackd. The R24 is reportedly compatible with the R16 when used as an audio interface. Both devices share the same USB ID and have the same number of inputs (8) and outputs (2). Therefore "R16/24" is mentioned throughout the patch. Regression tested using an Edirol UA-5 in both class compliant (16-bit) and "advanced" (24 bit, forces the use of quirks) modes. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Tested-by: Panu Matilainen <pmatilai@laiskiainen.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: USB-audio: Break out creation of silent urbs from prepare_outbound_urb()Ricard Wanderlof2015-10-191-19/+27
| | | | | | | | Refactoring in preparation for adding Zoom R16/24 quirk. No functional change. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix max packet size calculation for USB audioRicard Wanderlof2015-10-131-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rounding must take place before multiplication with the frame size, since each packet contains a whole number of frames. We must also properly consider the data interval, as a larger data interval will result in larger packets, which, depending on the sampling frequency, can result in packet sizes that are less than integral multiples of the packet size for a lower data interval. Detailed explanation and rationale: The code before this commit had the following expression on line 613 to calculate the maximum isochronous packet size: maxsize = ((ep->freqmax + 0xffff) * (frame_bits >> 3)) >> (16 - ep->datainterval); Here, ep->freqmax is the maximum assumed sample frequency, calculated from the nominal sample frequency plus 25%. It is ultimately derived from ep->freqn, which is in the units of frames per packet, from get_usb_full_speed_rate() or usb_high_speed_rate(), as applicable, in Q16.16 format. The expression essentially adds the Q16.16 equivalent of 0.999... (i.e. the largest number less than one) to the sample rate, in order to get a rate whose integer part is rounded up from the fractional value. The multiplication with (frame_bits >> 3) yields the number of bytes in a packet, and the (16 >> ep->datainterval) then converts it from Q16.16 back to an integer, taking into consideration the bDataInterval field of the endpoint descriptor (which describes how often isochronous packets are transmitted relative to the (micro)frame rate (125us or 1ms, for USB high speed and full speed, respectively)). For this discussion we will initially assume a bDataInterval of 0, so the second line of the expression just converts the Q16.16 value to an integer. In order to illustrate the problem, we will set frame_bits 64, which corresponds to a frame size of 8 bytes. The problem here is twofold. First, the rounding operation consists of the addition of 0x0.ffff and subsequent conversion to integer, but as the expression stands, the conversion to integer is done after multiplication with the frame size, rather than before. This results in the resulting maxsize becoming too large. Let's take an example. We have a sample rate of 96 kHz, so our ep->freqn is 0xc0000 (see usb_high_speed_rate()). Add 25% (line 612) and we get 0xf0000. The calculated maxsize is then ((0xf0000 + 0x0ffff) * 8) >> 16 = 127 . However, if we do the number of bytes calculation in a less obscure way it's more apparent what the true corresponding packet size is: we get ceil(96000 * 1.25 / 8000) * 8 = 120, where 1.25 is the 25% from line 612, and the 8000 is the number of isochronous packets per second on a high speed USB connection (125 us microframe interval). This is fixed by performing the complete rounding operation prior to multiplication with the frame rate. The second problem is that when considering the ep->datainterval, this must be done before rounding, in order to take the advantage of the fact that if the number of bytes per packet is not an integer, the resulting rounded-up integer is not necessarily a factor of two when the data interval is increased by the same factor. For instance, assuming a freqency of 41 kHz, the resulting bytes-per-packet value for USB high speed is 41 kHz / 8000 = 5.125, or 0x52000 in Q16.16 format. With a data interval of 1 (ep->datainterval = 0), this means that 6 frames per packet are needed, whereas with a data interval of 2 we need 10.25, i.e. 11 frames needed. Rephrasing the maxsize expression to: maxsize = (((ep->freqmax << ep->datainterval) + 0xffff) >> 16) * (frame_bits >> 3); for the above 96 kHz example we instead get ((0xf0000 + 0xffff) >> 16) * 8 = 120 which is the correct value. We can also do the calculation with a non-integer sample rate which is when rounding comes into effect: say we have 44.1 kHz (resulting ep->freqn = 0x58333, and resulting ep->freqmax 0x58333 * 1.25 = 0x6e3ff (rounded down)): Original maxsize = ((0x6e3ff + 0xffff) * 8) << 16 = 63 (63.124.. rounded down) True maxsize = ceil(44100 * 1.25 / 8000) * 8 = 7 * 8 = 56 New maxsize = ((0x6e3ff + 0xffff) >> 16) * 8 = 7 * 8 = 56 This is also corroborated by the wMaxPacketSize check on line 616. Assume that wMaxPacketSize = 104, with ep->maxpacksize then having the same value. As 104 < 127, we get maxsize = 104. ep->freqmax is then recalculated to (104 / 8) << 16 = 0xd0000 . Putting that rate into the original maxsize calculation yields a maxsize of ((0xd0000 + 0xffff) * 8) >> 16 = 111 (with decimals 111.99988). Clearly, we should get back the 104 here, which we would with the new expression: ((0xd0000 + 0xffff) >> 16) * 8 = 104 . (The error has not been a problem because it only results in maxsize being a bit too big which just wastes a couple of bytes, either as a result of the first maxsize calculation, or because the resulting calculation will hit the wMaxPacketSize value before the packet is too big, resulting in fixing the size to wMaxPacketSize even though the packet is actually not too long.) Tested with an Edirol UA-5 both at 44.1 kHz and 96 kHz. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Avoid nested autoresume callsTakashi Iwai2015-08-261-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pcm: Add snd_pcm_stop_xrun() helperTakashi Iwai2014-11-091-3/+1
| | | | | | | | | | | Add a new helper function snd_pcm_stop_xrun() to the standard sequnce lock/snd_pcm_stop(XRUN)/unlock by a single call, and replace the existing open codes with this helper. The function checks the PCM running state to prevent setting the wrong state, too, for more safety. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Trigger PCM XRUN at XRUNTakashi Iwai2014-11-061-3/+8
| | | | | | | | | | | The usb-audio driver detects XRUN at its complete callback, but the actual code to trigger PCM XRUN is commented out because it caused deadlock in the past. This patch revives the PCM trigger properly. It resulted in more than just enabling snd_pcm_stop(), but it had to deduce the PCM substream with proper NULL checks and holds the stream lock around the call. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Pass direct struct pointer instead of list_headTakashi Iwai2014-11-041-5/+2
| | | | | | | | | | | | Some functions in mixer.c and endpoint.c receive list_head instead of the object itself. This is not obvious and rather error-prone. Let's pass the proper object directly instead. The functions in midi.c still receive list_head and this can't be changed since the object definition isn't exposed to the outside of midi.c, so left as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix races at disconnection and PCM closingTakashi Iwai2014-06-261-3/+14
| | | | | | | | | | | | | | | | | | | | | | | When a USB-audio device is disconnected while PCM is still running, we still see some race: the disconnect callback calls snd_usb_endpoint_free() that calls release_urbs() and then kfree() while a PCM stream would be closed at the same time and calls stop_endpoints() that leads to wait_clear_urbs(). That is, the EP object might be deallocated while a PCM stream is syncing with wait_clear_urbs() with the same EP. Basically calling multiple wait_clear_urbs() would work fine, also calling wait_clear_urbs() and release_urbs() would work, too, as wait_clear_urbs() just reads some fields in ep. The problem is the succeeding kfree() in snd_pcm_endpoint_free(). This patch moves out the EP deallocation into the later point, the destructor callback. At this stage, all PCMs must have been already closed, so it's safe to free the objects. Reported-by: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback dataClemens Ladisch2014-05-021-1/+14
| | | | | | | | | | | | | | | | The TEAC UD-H01 firmware sends wrong feedback frequency values, thus causing the PC to send the samples at a wrong rate, which results in clicks and crackles in the output. Add a workaround to detect and fix the corruption. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> [mick37@gmx.de: use sender->udh01_fb_quirk rather than ep->udh01_fb_quirk in snd_usb_handle_sync_urb()] Reported-and-tested-by: Mick <mick37@gmx.de> Reported-and-tested-by: Andrea Messa <andr.messa@tiscali.it> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Use standard printk helpersTakashi Iwai2014-02-261-13/+19
| | | | | | | | | | | Convert with dev_err() and co from snd_printk(), etc. As there are too deep indirections (e.g. ep->chip->dev->dev), a few new local macros, usb_audio_err() & co, are introduced. Also, the device numbers in some messages are dropped, as they are shown in the prefix automatically. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb: use multiple packets per urb for Wireless USB inbound audioThomas Pugliese2013-11-271-1/+15
| | | | | | | | | | | For Wireless USB audio devices, use multiple isoc packets per URB for inbound endpoints with a datainterval < 5. This allows the WUSB host controller to take advantage of bursting to service endpoints whose logical polling interval is less than the 4ms minimum polling interval limit in WUSB. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: remove unused endpoint flag EP_FLAG_ACTIVATEDEldad Zack2013-10-071-3/+0
| | | | | | | EP_FLAG_ACTIVATED is never tested for, remove it. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: rename alt_idx to altsettingEldad Zack2013-10-071-3/+3
| | | | | | | | | | | | | | | | As Clemens Ladisch kindly explained: "Please note that there are two methods to identify alternate settings: the number, which is the value in bAlternateSetting, and the index, which is the index in the descriptor array. There might be some wording in the USB spec that these two values must be the same, but in reality, [insert standard rant about firmware writers], bAlternateSetting must be treated as a random ID value." This patch changes the name to express the correct usage semantics. No functional change. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: void return type of snd_usb_endpoint_deactivate()Eldad Zack2013-10-071-10/+5
| | | | | | | | | | The return value of snd_usb_endpoint_deactivate() is not used, make the function have no return value. Update the documentation to reflect what the function is actually doing. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: don't deactivate URBs on in-use EPEldad Zack2013-10-071-3/+3
| | | | | | | | If an endpoint in use, its associated URBs should not be deactivated. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: remove unused parameter from sync_ep_set_paramsEldad Zack2013-10-071-3/+2
| | | | | | | | Since the format is not actually used in sync_ep_set_params(), there is no need to pass it down. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: improve buffer size computations for USB PCM audioAlan Stern2013-09-261-45/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the way URBs are allocated and their sizes are determined for PCM playback in the snd-usb-audio driver. Currently the driver allocates too few URBs for endpoints that don't use implicit sync, making underruns more likely to occur. This may be a holdover from before I/O delays could be measured accurately; in any case, it is no longer necessary. The patch allocates as many URBs as possible, subject to four limitations: The total number of URBs for the endpoint is not allowed to exceed MAX_URBS (which the patch increases from 8 to 12). The total number of packets per URB is not allowed to exceed MAX_PACKS (or MAX_PACKS_HS for high-speed devices), which is decreased from 20 to 6. The total duration of queued data is not allowed to exceed MAX_QUEUE, which is decreased from 24 ms to 18 ms. The total number of ALSA frames in the output queue is not allowed to exceed the ALSA buffer size. The last requirement is the hardest to implement. Currently the number of URBs needed to fill a buffer cannot be determined in advance, because a buffer contains a fixed number of frames whereas the number of frames in an URB varies to match shifts in the device's clock rate. To solve this problem, the patch changes the logic for deciding how many packets an URB should contain. Rather than using as many as possible without exceeding an ALSA period boundary, now the driver uses only as many packets as needed to transfer a predetermined number of frames. As a result, unless the device's clock has an exceedingly variable rate, the number of URBs making up each period (and hence each buffer) will remain constant. The overall effect of the patch is that playback works better in low-latency settings. The user can still specify values for frames/period and periods/buffer that exceed the capabilities of the hardware, of course. But for values that are within those capabilities, the performance will be improved. For example, testing shows that a high-speed device can handle 32 frames/period and 3 periods/buffer at 48 KHz, whereas the current driver starts to get glitchy at 64 frames/period and 2 periods/buffer. A side effect of these changes is that the "nrpacks" module parameter is no longer used. The patch removes it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Clemens Ladisch <clemens@ladisch.de> Tested-by: Daniel Mack <zonque@gmail.com> Tested-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-v3.12' of ↵Takashi Iwai2013-08-231-7/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.12 - DAPM is now mandatory for CODEC drivers in order to avoid the repeated regressions in the special cases for non-DAPM CODECs and make it easier to integrate with other components on boards. All existing drivers have had some level of DAPM support added. - A lot of cleanups in DAPM plus support for maintaining controls in a specific state while a DAPM widget all contributed by Lars-Peter Clausen. - Core helpers for bitbanged AC'97 reset from Markus Pargmann. - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson Microelectronics WM8997. - Support for building drivers that can support it cross-platform for compile test.
| * ALSA: usb-audio: do not trust too-big wMaxPacketSize valuesClemens Ladisch2013-08-081-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver used to assume that the streaming endpoint's wMaxPacketSize value would be an indication of how much data the endpoint expects or sends, and compute the number of packets per URB using this value. However, the Focusrite Scarlett 2i4 declares a value of 1024 bytes, while only about 88 or 44 bytes are be actually used. This discrepancy would result in URBs with far too few packets, which would not work correctly on the EHCI driver. To get correct URBs, use wMaxPacketSize only as an upper limit on the packet size. Reported-by: James Stone <jamesmstone@gmail.com> Tested-by: James Stone <jamesmstone@gmail.com> Cc: <stable@vger.kernel.org> # 2.6.35+ Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: usb-audio: WARN_ON when alts is passed as NULLEldad Zack2013-08-061-0/+3
|/ | | | | | | | | | Prevent NULL dereference in snd_usb_add_endpoints(), when alts is passed as NULL. In this case, WARN (since this is a non-fatal bug) and return NULL ep. Call sites treat a NULL return value as an error. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: USB: adjust for changed 3.8 USB APIClemens Ladisch2013-04-291-3/+2
| | | | | | | | | | | | | | The recent changes in the USB API ("implement new semantics for URB_ISO_ASAP") made the former meaning of the URB_ISO_ASAP flag the default, and changed this flag to mean that URBs can be delayed. This is not the behaviour wanted by any of the audio drivers because it leads to discontinuous playback with very small period sizes. Therefore, our URBs need to be submitted without this flag. Reported-by: Joe Rayhawk <jrayhawk@fairlystable.org> Cc: <stable@vger.kernel.org> # 3.8 only Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: add support for DSD DOP stream transportDaniel Mack2013-04-181-0/+9
| | | | | | | | | | | | | | | | | | | | | | In order to provide a compatibility way for pushing DSD samples through ordinary PCM channels, the "DoP open Standard" was invented. See http://www.dsd-guide.com for the official document. The host is required to stuff DSD marker bytes (0x05, 0xfa, alternating) in the MSB of 24 bit wide samples on the bus, in addition to the 16 bits of actual DSD sample payload. To support this, the hardware and software stride logic in the driver has to be tweaked a bit, as we make the userspace believe we're operating on 16 bit samples, while we in fact push one more byte per channel down to the hardware. The DOP runtime information is stored in struct snd_usb_substream, so we can keep track of our state across multiple calls to prepare_playback_urb_dsd_dop(). Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: spelling correctionEldad Zack2013-04-041-7/+7
| | | | | | | | Correct spelling of snd_usb_endpoint_implict_feedback_sink in all occurances. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: convert list_for_each to entry variantEldad Zack2013-04-041-3/+1
| | | | | | | | Change occurances of list_for_each into list_for_each_entry where applicable. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: use sender stride for implicit feedbackEldad Zack2012-11-291-3/+6
| | | | | | | | | | | | | | | For implicit feedback endpoints, the number of bytes for each packet is matched by the corresponding synchronizing endpoint. The size is calculated by taking the actual size and dividing it by the stride - currently by the endpoint's stride, but we should use the synchronization source's stride. This is evident when the number of channels differ between the synchronization source and the implicitly fed-back endpoint, as with M-Audio Fast Track C400 - the synchronization source (capture) has 4 channels, while the implicit feedback mode endpoint has 6. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: stop both data and sync endpoints asynchronouslyTakashi Iwai2012-11-211-6/+5
| | | | | | | | | | | | | | As we are stopping the endpoints asynchronously now, it's better to trigger the stop of both data and sync endpoints and wait for pending stopping operations, instead of the sequential trigger-and-wait procedure. So the wait argument in snd_usb_endpoint_stop() is dropped, and it's expected that the caller synchronizes explicitly by calling snd_usb_endpoint_sync_pending_stop(). (Actually there is only one place calling this, so it was safe to change.) Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: simplify endpoint deactivation codeTakashi Iwai2012-11-211-16/+7
| | | | | | | | For further code simplification, drop the conditional call for usb_kill_urb() with can_wait argument in deactivate_urbs(), and use only usb_unlink_urb() and wait_clear_urbs() pairs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: simplify snd_usb_endpoint_start/stop argumentsTakashi Iwai2012-11-211-9/+8
| | | | | | | | | Reduce the redundant arguments for snd_usb_endpoint_start() and snd_usb_endpoint_stop(). Also replaced from int to bool. No functional changes by this commit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Deprecate async_unlink optionTakashi Iwai2012-11-211-1/+1
| | | | | | | The async unlink behavior has been working over years. The option was provided only as a workaround for 2.4.x kernel. Let's get rid of it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: use bitmap_weightJoe Perches2012-11-171-6/+1
| | | | | | | Use bitmap_weight to count the total number of bits set in bitmap. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix crash at re-preparing the PCM streamTakashi Iwai2012-11-081-0/+13
| | | | | | | | | | | | | | | | | There are bug reports of a crash with USB-audio devices when PCM prepare is performed immediately after the stream is stopped via trigger callback. It turned out that the problem is that we don't wait until all URBs are killed. This patch adds a new function to synchronize the pending stop operation on an endpoint, and calls in the prepare callback for avoiding the crash above. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=49181 Reported-and-tested-by: Artem S. Tashkinov <t.artem@lycos.com> Cc: <stable@vger.kernel.org> [v3.6] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'sound-3.7' of ↵Linus Torvalds2012-10-091-13/+26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
| * ALSA: usb-audio: Don't require hw_params in endpoint.Dylan Reid2012-09-191-13/+18
| | | | | | | | | | | | | | | | | | Change the interface to configure an endpoint so that it doesn't require a hw_params struct. This will allow it to be called from prepare instead of hw_params, configuring it after system resume. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * Merge branch 'for-linus' into for-nextTakashi Iwai2012-09-111-14/+10
| |\ | | | | | | | | | To merge HD-audio fixes back to 3.7 development line
| * | ALSA: snd-usb: Add quirks for Playback Designs devicesDaniel Mack2012-09-041-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Playback Designs' USB devices have some hardware limitations on their USB interface. In particular: - They need a 20ms delay after each class compliant request as the hardware ACKs the USB packets before the device is actually ready for the next command. Sending data immediately will result in buffer overflows in the hardware. - The devices send bogus feedback data at the start of each stream which confuse the feedback format auto-detection. This patch introduces a new quirks hook that is called after each control packet and which adds a delay for all devices that match Playback Designs' USB VID for now. In addition, it adds a counter to snd_usb_endpoint to drop received packets on the floor. Another new quirks function that is called once an endpoint is started initializes that counter for these devices on their sync endpoint. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Andreas Koch <andreas@akdesigninc.com> Supported-by: Demian Martin <demianm_1@yahoo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: snd-usb: fix next_packet_size calls for pause caseDaniel Mack2012-09-281-1/+7
| |/ |/| | | | | | | | | | | | | | | | | | | | | Also fix the calls to next_packet_size() for the pause case. This was missed in 245baf983 ("ALSA: snd-usb: fix calls to next_packet_size"). Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reported-and-tested-by: Christian Tefzer <ctrefzer@gmx.de> Cc: stable@kernel.org [ Taking directly because Takashi is on vacation - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | ALSA: snd-usb: fix calls to next_packet_sizeDaniel Mack2012-08-311-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to support devices with implicit feedback streaming models, packet sizes are now stored with each individual urb, and the PCM handling code which fills the buffers purely relies on the size fields now. However, calling snd_usb_audio_next_packet_size() for all possible packets in an URB at once, prior to letting the PCM code do its job does in fact not lead to the same behaviour than what the old code did: The PCM code will break its loop once a period boundary is reached, consequently using up less packets that it really could. As snd_usb_audio_next_packet_size() implements a feedback mechanism to the endpoints phase accumulator, the number of calls to that function matters, and when called too often, the data rate runs out of bounds. Fix this by making the next_packet function public, and call it from the PCM code as before if the packet data sizes are not defined. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: stable@kernel.org [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 23:43:40 +0100