summaryrefslogtreecommitdiffstats
path: root/sound/usb/format.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: usb-audio: Check presence of valid altsetting controlAlexander Tsoy2024-01-291-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many devices with a single alternate setting do not have a Valid Alternate Setting Control and validation performed by validate_sample_rate_table_v2v3() doesn't work on them and is not really needed. So check the presense of control before sending altsetting validation requests. MOTU Microbook IIc is suffering the most without this check. It takes up to 40 seconds to bootup due to how slow it switches sampling rates: [ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60 [ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2659.164829] usb 3-2: Product: MicroBook IIc [ 2659.164830] usb 3-2: Manufacturer: MOTU [ 2659.166204] usb 3-2: Found last interface = 3 [ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug [ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3 [ 2679.322321] usb 3-2: Creating new data endpoint #3 [ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1 [ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110 [ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug [ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84 [ 2694.444721] usb 3-2: Creating new data endpoint #84 [ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1 Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Add a sample rate workaround for Line6 Pod GoTakashi Iwai2023-05-121-0/+1
| | | | | | | | | | | Line6 Pod Go (0e41:424b) requires the similar workaround for the fixed 48k sample rate like other Line6 models. This patch adds the corresponding entry to line6_parse_audio_format_rate_quirk(). Reported-by: John Humlick <john@humlick.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230512075858.22813-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix regression on detection of Roland VS-100Takashi Iwai2023-03-241-2/+6
| | | | | | | | | | | | | | | | | | It's been reported that the recent kernel can't probe the PCM devices on Roland VS-100 properly, and it turned out to be a regression by the recent addition of the bit shift range check for the format bits. In the old code, we just did bit-shift and it resulted in zero, which is then corrected to the standard PCM format, while the new code explicitly returns an error in such a case. For addressing the regression, relax the check and fallback to the standard PCM type (with the info output). Fixes: 43d5ca88dfcd ("ALSA: usb-audio: Fix potential out-of-bounds shift") Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217084 Link: https://lore.kernel.org/r/20230324075005.19403-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Drop superfluous '0' in Presonus Studio 1810c's IDTakashi Iwai2021-12-021-1/+1
| | | | | | | | | The vendor ID of Presonus Studio 1810c had a superfluous '0' in its USB ID. Drop it. Fixes: 8dc5efe3d17c ("ALSA: usb-audio: Add support for Presonus Studio 1810c") Link: https://lore.kernel.org/r/20211202083833.17784-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirkJason Ormes2021-11-011-0/+1
| | | | | | | | | | | | | | | | | Adding the Line6 HX-Stomp XL USB_ID as it needs this fixed frequency quirk as well. The device is basically just the HX-Stomp with some more buttons on the face. I've done some recording with it after adding it, and it seems to function properly with this fix. The Midi features appear to be working as well. [ a coding style fix and patch reformat by tiwai ] Signed-off-by: Jason Ormes <skryking@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211030200405.1358678-1-skryking@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Move rate validation quirk into quirk_flagsTakashi Iwai2021-08-021-5/+1
| | | | | | | | | The rate validation at the device probe is applied only to the specific devices (currently only for MOTU devices), and this check can be moved to quirk_flags gracefully, too. Link: https://lore.kernel.org/r/20210729074404.19728-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: fix rate on Ozone Z90 USB headsetDaehwan Jung2021-06-171-0/+2
| | | | | | | | | It mislabels its 96 kHz altsetting and that's why it causes some noise Signed-off-by: Daehwan Jung <dh10.jung@samsung.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1623836097-61918-1-git-send-email-dh10.jung@samsung.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: fix control-request directionJohan Hovold2021-05-211-1/+1
| | | | | | | | | | | | | | The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the UAC2_CS_CUR request which erroneously used usb_sndctrlpipe(). Fixes: 93db51d06b32 ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3") Cc: stable@vger.kernel.org # 5.10 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210521133742.18098-1-johan@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: workaround for iface reset issueTakashi Iwai2021-01-231-0/+11
| | | | | | | | | | | | | | | The recently introduced sample rate validation code seems causing a problem on some devices; namely, after performing this, the bus gets screwed and it influences even on other USB devices. As a quick workaround, perform it only for the necessary devices; currently MOTU devices are known to need the valid altset checks, so filter out other devices. Fixes: 93db51d06b32 ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3") Reported-by: Jamie Heilman <jamie@audible.transient.net> BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178203 Link: https://lore.kernel.org/r/20210123155842.22652-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix potential out-of-bounds shiftTakashi Iwai2020-12-141-0/+2
| | | | | | | | | | | | | syzbot spotted a potential out-of-bounds shift in the USB-audio format parser that receives the arbitrary shift value from the USB descriptor. Add a range check for avoiding the undefined behavior. Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209084552.17109-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Simplify rate_min/max and rates set upTakashi Iwai2020-11-231-29/+24
| | | | | | | | | | | | | | There are multiple places in format.c performing the similar code for setting the rate_min, rate_max and rates fields. This patch unifies those in a helper function and calls it at the end of the parser phase so that all rate_table entries have been already determined. No functional changes, just a minor code refactoring. Tested-by: Keith Milner <kamilner@superlative.org> Tested-by: Dylan Robinson <dylan_robinson@motu.com> Link: https://lore.kernel.org/r/20201123085347.19667-33-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Drop debug.hTakashi Iwai2020-11-231-2/+3
| | | | | | | | | | | | | | | | | | The file debug.h contains a simple macro for debug prints, and it's used only in two places, the format parser and the hw_params rules. The former actually should print a more informative message instead, so the only users are the hw_parmas rules. This patch moves the contents of debug.h into the hw_params rules local code and remove the unneeded includes. Also, the debug print in the format parser is replaced with the information print with more useful information, and the raw printk() call is replaced with pr_debug(). Tested-by: Keith Milner <kamilner@superlative.org> Tested-by: Dylan Robinson <dylan_robinson@motu.com> Link: https://lore.kernel.org/r/20201123085347.19667-13-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3Takashi Iwai2020-11-231-0/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | The current driver code assumes blindly that all found sample rates for the same endpoint from the UAC2 and UAC3 descriptors can be used no matter which altsetting, but actually this was wrong: some devices accept only limited sample rates in each altsetting. For determining which altsetting supports which rate, we need to verify each sample rate and check the validity via UAC2_AS_VAL_ALT_SETTINGS. This control reports back the available altsettings as a bitmap. This patch implements the missing piece above, the verification and reconstructs the sample rate tables based on the result. An open question is how to deal with the altsettings that ended up with no valid sample rates after verification. At least, there is a device that showed this problem although the sample rates did work in the later usage (see bug link). For now, we accept such an altset as is, assuming that it's a firmware bug. Reported-by: Dylan Robinson <dylan_robinson@motu.com> Tested-by: Keith Milner <kamilner@superlative.org> Tested-by: Dylan Robinson <dylan_robinson@motu.com> BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178203 Link: https://lore.kernel.org/r/20201123085347.19667-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Line6 Pod Go interface requires static clock rate quirkLukasz Halman2020-10-201-0/+1
| | | | | | | | | | | Recently released Line6 Pod Go requires static clock rate quirk to make its usb audio interface working. Added its usb id to the list of similar line6 devices. Signed-off-by: Lukasz Halman <lukasz.halman@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201020061409.GA24382@TAG009442538903 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Set 48 kHz rate for RodecasterChristopher Swenson2020-06-151-2/+4
| | | | | | | | | | | | | Like the Line6 devices, the Rode Rodecaster Pro does not support UAC2_CS_RANGE and only supports a sample rate of 48 kHz. Tested against a Rode Rodecaster Pro. Tested-by: Christopher Swenson <swenson@swenson.io> Signed-off-by: Christopher Swenson <swenson@swenson.io> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ebdb9e72-9649-0b5e-b9b9-d757dbf26927@swenson.io Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Filter out unsupported sample rates on Focusrite devicesAlexander Tsoy2020-04-181-0/+51
| | | | | | | | | | | | | | | | | | Many Focusrite devices supports a limited set of sample rates per altsetting. These includes audio interfaces with ADAT ports: - Scarlett 18i6, 18i8 1st gen, 18i20 1st gen; - Scarlett 18i8 2nd gen, 18i20 2nd gen; - Scarlett 18i8 3rd gen, 18i20 3rd gen; - Clarett 2Pre USB, 4Pre USB, 8Pre USB. Maximum rate is exposed in the last 4 bytes of Format Type descriptor which has a non-standard bLength = 10. Tested-by: Alexey Skobkin <skobkin-ru@ya.ru> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200418175815.12211-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/usb-uac2-effect-unit' into for-nextTakashi Iwai2020-02-171-13/+23
|\ | | | | | | | | | | | | Merging the UAC2 effect unit parser improvement. As it's based on the previous usb-audio driver fix, it was deviated from for-next branch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000Alexander Tsoy2020-02-131-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It should be safe to ignore clock validity check result if the following conditions are met: - only one single sample rate is supported; - the terminal is directly connected to the clock source; - the clock type is internal. This is to deal with some Denon DJ controllers that always reports that clock is invalid. Tested-by: Tobias Oszlanyi <toszlanyi@yahoo.de> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: usb-audio: Apply 48kHz fixed rate playback for Jabra Evolve 65 headsetTakashi Iwai2020-02-111-11/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | Jabra Evolve 65 headset appears as if supporting lower rates than 48kHz, but it actually doesn't work but with 48kHz for playback. This patch applies a workaround to enforce the 48kHz like LINE6 devices already did. The workaround is put in a unified helper function, set_fixed_rate(), to be called from both places now. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206149 Link: https://lore.kernel.org/r/20200211111419.5895-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: usb-audio: Add support for Presonus Studio 1810cNick Kossifidis2020-02-151-0/+37
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Presonus Studio 1810c, a usb interface that's UAC2 compliant with a few quirks and a few extra hw-specific controls. I've tested all 3 altsettings and the added switch controls and they work as expected. More infos on the card: https://www.presonus.com/products/Studio-1810c Note that this work is based on packet inspection with usbmon. I just wanted to get this card to work for using it on our open-source radio station: https://github.com/UoC-Radio v2 address issues reported by Takashi: * Properly get/set enum type controls * Prevent race condition on switch_get/set * Various control naming changes * Various coding style fixes v3 improve readability of sample rate filtering and some other minor changes. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Link: https://lore.kernel.org/r/5e47481a.1c69fb81.befb3.8dac@mx.google.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'for-linus' into for-nextTakashi Iwai2020-01-261-0/+3
|\ | | | | | | | | | | Resolve conflicts and correct the hex numbers, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82Nicola Lunghi2020-01-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | With firmware 2.82 Line6 changed the usb id of some of the Helix devices but the quirks is still needed. Add it to the quirk list for line6 helix family of devices. Thanks to Jens for pointing out the missing ids. Signed-off-by: Nicola Lunghi <nick83ola@gmail.com> Link: https://lore.kernel.org/r/20200125150917.5040-1-nick83ola@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: usb-audio: Use lower hex numbers for IDsTakashi Iwai2020-01-051-4/+4
|/ | | | | | | | | For consistency reason, make all hex numbers with lower alphabets for USB ID entries. It improves grep-ability and reduces careless mistakes. Link: https://lore.kernel.org/r/20200105081900.21870-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-v5.3' of ↵Takashi Iwai2019-07-081-14/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.3 This is a very big update, mainly thanks to Morimoto-san's refactoring work and some fairly large new drivers. - Lots more work on moving towards a component based framework from Morimoto-san. - Support for force disconnecting muxes from Jerome Brunet. - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant CX2072X, Realtek RT1011 and RT1308. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner2019-05-301-14/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | ALSA: usb-audio: fix Line6 Helix audio format ratesNicola Lunghi2019-07-071-3/+43
|/ | | | | | | | | | | | Line6 Helix and HX stomp devices don't support retrieving the number of clock sample rate. Add a quirk to set it to 48Khz by default. [ fixed wrong variable initialization changes by tiwai ] Signed-off-by: Nicola Lunghi <nick83ola@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Expose sample resolution through proc interfaceJussi Laako2019-02-181-0/+2
| | | | | | | | | | At least some USB devices use (MSB-aligned) audio format larger than the actual resolution of the device. In order to expose the actual device resolution (bBitResolution), add extra field to the procfs stream info interface. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'sound-fix-4.18-rc1' of ↵Linus Torvalds2018-06-151-1/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here is a collection of small fixes on top of the previous update. All small and obvious fixes. Mostly for usual suspects, USB-audio and HD-audio, but a few trivial error handling fixes for misc drivers as well" * tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Always create the interrupt pipe for the mixer ALSA: usb-audio: Add insertion control for UAC3 BADD ALSA: usb-audio: Change in connectors control creation interface ALSA: usb-audio: Add bi-directional terminal types ALSA: lx6464es: add error handling for pci_ioremap_bar ALSA: sonicvibes: add error handling for snd_ctl_add ALSA: usb-audio: Remove explicitly listed Mytek devices ALSA: usb-audio: Generic DSD detection for XMOS-based implementations ALSA: usb-audio: Add native DSD support for Mytek DACs ALSA: hda/realtek - Add shutup hint ALSA: usb-audio: Disable the quirk for Nura headset ALSA: hda: add dock and led support for HP ProBook 640 G4 ALSA: hda: add dock and led support for HP EliteBook 830 G5 ALSA: emu10k1: add error handling for snd_ctl_add ALSA: fm801: add error handling for snd_ctl_add
| * ALSA: usb-audio: Add native DSD support for Mytek DACsJussi Laako2018-06-131-1/+4
| | | | | | | | | | | | | | | | | | | | Add new mostly generic code with Mytek VID to support native DSD mode. This implementation should be easier to maintain when manufacturers release new products. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | treewide: kmalloc() -> kmalloc_array()Kees Cook2018-06-131-2/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* ALSA: usb-audio: silence a static checker warningDan Carpenter2018-03-291-1/+1
| | | | | | | | | | We recently made "format" a u64 variable so now static checkers complain that this shift will wrap around if format is more than 31. I don't think it makes a difference for runtime, but it's simple to silence the warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb: initial USB Audio Device Class 3.0 supportRuslan Bilovol2018-03-211-16/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently released USB Audio Class 3.0 specification introduces many significant changes comparing to previous versions, like - new Power Domains, support for LPM/L1 - new Cluster descriptor - changed layout of all class-specific descriptors - new High Capability descriptors - New class-specific String descriptors - new and removed units - additional sources for interrupts - removed Type II Audio Data Formats - ... and many other things (check spec) It also provides backward compatibility through multiple configurations, as well as requires mandatory support for BADD (Basic Audio Device Definition) on each ADC3.0 compliant device This patch adds initial support of UAC3 specification that is enough for Generic I/O Profile (BAOF, BAIF) device support from BADD document. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: rmove print for failure of kmallocShawn Lin2016-08-221-3/+1
| | | | | | | | kmalloc already print similar error once failing to alloc enough memory, so let's remove this dump here. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix audio output on Roland SC-D70 sound moduleTakamichi Horikawa2015-04-211-1/+4
| | | | | | | | | | | | | | | | | | | | Roland SC-D70 reports its device class as vendor specific class and the quirk QUIRK_AUDIO_FIXED_ENDPOINT was used for audio output. In the quirks table the sampling rate was hard-coded to 44100 Hz and therefore not worked when the sound module was in 48000 Hz mode. In this change the quirk is changed to QUIRK_AUDIO_STANDARD_INTERFACE but as the sound module reports incorrect bSubframeSize in its descriptors, additional change is made in format.c to detect it and to override it (which uses the existing code for Edirol SD-90). Tested both when the sound module was in 44100 Hz mode and 48000 Hz mode and both audio input and output. MIDI related part of the driver is not touched. Signed-off-by: Takamichi Horikawa <takamichiho@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Use standard printk helpersTakashi Iwai2014-02-261-29/+39
| | | | | | | | | | | Convert with dev_err() and co from snd_printk(), etc. As there are too deep indirections (e.g. ep->chip->dev->dev), a few new local macros, usb_audio_err() & co, are introduced. Also, the device numbers in some messages are dropped, as they are shown in the prefix automatically. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix Creative VF0420 ratePavel Hofman2014-01-141-2/+4
| | | | | | | | Creative Live! Cam Vista IM (VF0420) reports rate of 16kHz while working at 8kHz. The patch adds its USB ID to the existing quirk. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: store protocol version in struct audioformatClemens Ladisch2013-06-271-24/+10
| | | | | | | | | Instead of reading bInterfaceProtocol from the descriptor whenever it's needed, store this value in the audioformat structure. Besides simplifying some code, this will allow us to correctly handle vendor- specific devices where the descriptors are marked with other values. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* ALSA: pcm_format_to_bits strong-typed conversionEldad Zack2013-04-291-2/+3
| | | | | | | | | | | Add a function to handle conversion from snd_pcm_format_t to bitwise with proper typing. Change such conversions to use this function and silence sparse warnings. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: add quirks handler for DSD streamsDaniel Mack2013-04-181-0/+3
| | | | | | | | | | | | | | | | | Unfortunately, none of the UAC standards provides a way to identify DSD (Direct Stream Digital) formats. Hence, this patch adds a quirks handler to identify USB interfaces that are capable of handling DSD. That quirks handler can augment the already parsed formats bit-field, by any of the new SNDRV_PCM_FMTBIT_DSD_{U8_U16} and setting the dsd_dop flag in the audio format, if the driver should take care for the DOP byte stuffing. The only devices that are known to work with this are the ones with a 'Playback Designs' vendor id. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: UAC2: do clock validity check earlierEldad Zack2013-04-041-1/+1
| | | | | | | | | | | | | | | Move the check that parse_audio_format_rates_v2() do after receiving the clock source entity ID directly into the find function and add a validation flag to the function. This patch does not introduce any logic flow change. It is provided to allow introducing automatic clock switching easier later. By moving this uac_clock_source_is_valid callsite, 2 additional callsites can be avoided. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: handle raw data format of UAC2 devicesDaniel Mack2013-03-181-4/+7
| | | | | | | | | | UAC2 compliant audio devices may announce the capability to transport raw audio data on their endpoints. Catch this and handle it as 'special' stream on the ALSA side. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Andreas Koch <andreas@akdesigninc.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: handle the bmFormats field as unsigned intDaniel Mack2013-03-181-4/+5
| | | | | | | | | This field may use up to 32 bits, so it should be handled as unsigned int. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Andreas Koch <andreas@akdesigninc.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Return meaningful error codes instead of -1 in format.cSachin Kamat2012-11-211-5/+5
| | | | | | | | | Also, silences the following smatch warning: sound/usb/format.c:170 parse_audio_format_rates_v1() warn: returning -1 instead of -ENOMEM is sloppy Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: avoid integer overflow in create_fixed_stream_quirk()Xi Wang2012-02-151-3/+1
| | | | | | | | | | | | | A malicious USB device could feed in a large nr_rates value. This would cause the subsequent call to kmemdup() to allocate a smaller buffer than expected, leading to out-of-bounds access. This patch validates the nr_rates value and reuses the limit introduced in commit 4fa0e81b ("ALSA: usb-audio: fix possible hang and overflow in parse_uac2_sample_rate_range()"). Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: fix possible hang and overflow in ↵Xi Wang2012-01-081-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | parse_uac2_sample_rate_range() A malicious USB device may feed in carefully crafted min/max/res values, so that the inner loop in parse_uac2_sample_rate_range() could run for a long time or even never terminate, e.g., given max = INT_MAX. Also nr_rates could be a large integer, which causes an integer overflow in the subsequent call to kmalloc() in parse_audio_format_rates_v2(). Thus, kmalloc() would allocate a smaller buffer than expected, leading to a memory corruption. To exploit the two vulnerabilities, an attacker needs physical access to the machine to plug in a malicious USB device. This patch makes two changes. 1) The type of "rate" is changed to unsigned int, so that the loop could stop once "rate" is larger than INT_MAX. 2) Limit nr_rates to 1024. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: increase control transfer timeoutClemens Ladisch2011-09-271-2/+2
| | | | | | | | | | | | | There are certain devices that are reportedly so slow that they need more than 100 ms to handle control transfers. Therefore, increase the timeout in mixer(_quirks).c to 1000 ms. The timeout parameter of snd_usb_ctl_msg() is now constant, so we can drop it. Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/misc' into for-linusTakashi Iwai2011-05-221-0/+1
|\
| * ALSA: usb-audio: include format.h in format.cDaniel Mack2011-05-181-0/+1
| | | | | | | | | | | | | | | | Just in case a prototype changes, we'll be warned. This also fixes a sparse warning. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: usb-audio - Terratec Aureon 7.1 USB ID as C-Media cm6206 quirksWolfgang Breyha2011-04-281-1/+3
|/ | | | | | | | This patch adds support for the Terratec Aureon 7.1 USB which uses a C-Media cm6206 and needs all the quirks already found in the past. Signed-off-by: Wolfgang Breyha <wbreyha@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: add Edirol SD-90 PCM supportClemens Ladisch2011-01-101-1/+4
| | | | | | | | Add support for the 24-bit audio I/Os of the Edirol SD-90 interface. Reported-any-tested-by: Jim Grusendorf <alsa-user@grusendorf.ca> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 14:36:57 +0100