| Commit message (Collapse) | Author | Files | Lines |
|---|
|
When the size isn't a small constant, __access_ok() will call
valid_user_address() with the address after the last byte of the user
buffer.
It is valid for a buffer to end with the last valid user address so
valid_user_address() must allow accesses to the base of the guard page.
[ This introduces an off-by-one in the other direction for the plain
non-sized accesses, but since we have that guard region that is a
whole page, those checks "allowing" accesses to that guard region
don't really matter. The access will fault anyway, whether to the
guard page or if the address has been masked to all ones - Linus ]
Fixes: 86e6b1547b3d0 ("x86: fix user address masking non-canonical speculation issue")
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Josh Poimboeuf reports that he got a "will-it-scale.per_process_ops 1.9%
improvement" report for his patch that changed __get_user() to use
pointer masking instead of the explicit speculation barrier. However,
that patch doesn't actually work in the general case, because some (very
bad) architecture-specific code actually depends on __get_user() also
working on kernel addresses.
A profile showed that the offending __get_user() was the futex code,
which really should be fixed up to not use that horrid legacy case.
Rewrite futex_get_value_locked() to use the modern user acccess helpers,
and inline it so that the compiler not only avoids the function call for
a few instructions, but can do CSE on the address masking.
It also turns out the x86 futex functions have unnecessary barriers in
other places, so let's fix those up too.
Link: https://lore.kernel.org/all/20241115230653.hfvzyf3aqqntgp63@jpoimboe/
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 6fd47effe92b, and the related self-test update
commit e14e0eaeb040 ("selftests/hid: add test for assigning a given
device to hid-generic").
It results in things like the scroll wheel on Logitech mice not working
after a reboot due to the kernel being confused about the state of the
high-resolution mode.
Quoting Benjamin Tissoires:
"The idea of 6fd47effe92b was to be able to call hid_bpf_rdesc_fixup()
once per reprobe of the device.
However, because the bpf filter can now change the quirk value, the
call had to be moved before the driver gets bound (which was
previously ensuring the unicity of the call).
The net effect is that now, in the case hid-generic gets loaded first
and then the specific driver gets loaded once the disk is available,
the value of ->quirks is not reset, but kept to the value that was set
by hid-generic (HID_QUIRK_INPUT_PER_APP).
Once hid-logitech-hidpp kicks in, that quirk is now set, which creates
two inputs for the single mouse: one keyboard for fancy shortcuts, and
one mouse node.
However, hid-logitech-hidpp expects only one input node to be attached
(it stores it into hidpp->input), and when a wheel event is received,
because there is some processing with high-resolution wheel events,
the wheel event is injected into hidpp->input.
And of course, when HID_QUIRK_INPUT_PER_APP is set, hidpp->input gets
the keyboard node, which doesn't have wheel event type, and the events
are ignored"
Reported-and-bisected-by: Mike Galbraith <efault@gmx.de>
Link: https://lore.kernel.org/all/CAHk-=wiUkQM3uheit2cNM0Y0OOY5qqspJgC8LkmOkJ2p2LDxcw@mail.gmail.com/
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We were accidentally allocating a layout for the *square* of the object
size due to a variable shadowing mishap.
Fixes memory bloat and page allocation failures in drm/asahi.
Reported-by: Janne Grunau <j@jannau.net>
Fixes: 9e7bbfa18276 ("rust: alloc: introduce `ArrayLayout`")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20241123-rust-fix-arraylayout-v1-1-197e64c95bd4@asahilina.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This list started as a "when to prefer `expect`" list, but at some point
during writing I changed it to a "prefer `expect` unless..." one. However,
the first bullet remained, which does not make sense anymore.
Thus remove it. In addition, fix nearby typo.
Fixes: 04866494e936 ("Documentation: rust: discuss `#[expect(...)]` in the guidelines")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241117133127.473937-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In beta Clippy (i.e. Rust 1.83.0), the `needless_lifetimes` lint has
been extended [1] to suggest eliding `impl` lifetimes, e.g.
error: the following explicit lifetimes could be elided: 'a
--> rust/kernel/list.rs:647:6
|
647 | impl<'a, T: ?Sized + ListItem<ID>, const ID: u64> FusedIterator for Iter<'a, T, ID> {}
| ^^ ^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
= note: `-D clippy::needless-lifetimes` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::needless_lifetimes)]`
help: elide the lifetimes
|
647 - impl<'a, T: ?Sized + ListItem<ID>, const ID: u64> FusedIterator for Iter<'a, T, ID> {}
647 + impl<T: ?Sized + ListItem<ID>, const ID: u64> FusedIterator for Iter<'_, T, ID> {}
A possibility would have been to clean them -- the RFC patch [2] did
this, while asking if we wanted these cleanups. There is an open issue
[3] in Clippy about being able to differentiate some of the new cases,
e.g. those that do not involve introducing `'_`. Thus it seems others
feel similarly.
Thus, for the time being, we decided to `allow` the lint.
Link: https://github.com/rust-lang/rust-clippy/pull/13286 [1]
Link: https://lore.kernel.org/rust-for-linux/20241012231300.397010-1-ojeda@kernel.org/ [2]
Link: https://github.com/rust-lang/rust-clippy/issues/13514 [3]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241116181538.369355-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Type 4 PCC channels have an option to send back a response
to the platform when they are done processing the request.
The flag to indicate whether or not to respond is inside
the message body, and thus is not available to the pcc
mailbox.
If the flag is not set, still set command completion
bit after processing message.
In order to read the flag, this patch maps the shared
buffer to virtual memory. To avoid duplication of mapping
the shared buffer is then made available to be used by
the driver that uses the mailbox.
Signed-off-by: Adam Young <admiyo@os.amperecomputing.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/mailbox to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Make a few indentions consistent while touching these struct
initializers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Replace %i with %u in snprintf() because it is "unsigned int".
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Both the inner and outer loops in this code use the "i" iterator.
The inner loop should really use a different iterator.
It doesn't affect things in practice because the data comes from the
device tree. The "protocol" and "windows" variables are going to be
zero. That means we're always going to hit the "return &chans[channel];"
statement and we're not going to want to iterate through the outer
loop again.
Still it's worth fixing this for future use cases.
Fixes: 5a6338cce9f4 ("mailbox: arm_mhuv2: Add driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
As per zynqmp-ipi bindings, zynqmp IPI node can have multiple child nodes.
Current IPI setup function is set only for first child node. If IPI node
has multiple child nodes in the device-tree, then IPI setup fails for
child nodes other than first child node. In such case kernel will crash.
Fix this crash by registering IPI setup function for each available child
node.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add bindings for the mailbox controller. This work is based on the vendor
kernel. [1]
Link: https://github.com/revyos/thead-kernel.git [1]
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
This driver was tested using the drm/imagination GPU driver. It was able
to successfully power on the GPU, by passing a command through mailbox
from E910 core to E902 that's responsible for powering up the GPU. The
GPU driver was able to read the BVNC version from control registers,
which confirms it was successfully powered on.
[ 33.957467] powervr ffef400000.gpu: [drm] loaded firmware
powervr/rogue_36.52.104.182_v1.fw
[ 33.966008] powervr ffef400000.gpu: [drm] FW version v1.0 (build
6621747 OS)
[ 38.978542] powervr ffef400000.gpu: [drm] *ERROR* Firmware failed to
boot
Though the driver still fails to boot the firmware, the mailbox driver
works when used with the not-yet-upstreamed firmware AON driver. There
is ongoing work to get the BXM-4-64 supported with the drm/imagination
driver [1], though it's not completed yet.
This work is based on the driver from the vendor kernel [2].
Link: https://gitlab.freedesktop.org/imagination/linux-firmware/-/issues/2 [1]
Link: https://github.com/revyos/thead-kernel.git [2]
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
It should be size of the struct clk_bulk_data, not data pointer pass to
devm_kcalloc().
Fixes: aa1609f571ca ("mailbox: mtk-cmdq: Dynamically allocate clk_bulk_data structure")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Document compatible for Qualcomm SM8750 SoC IPCC, compatible with
existing generic fallback.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
fallbacks
Commit 1e9cb7e007dc ("dt-bindings: mailbox: qcom,apcs-kpss-global: use
fallbacks") and commit 34d8775a0edc ("dt-bindings: mailbox:
qcom,apcs-kpss-global: use fallbacks for few variants") added fallbacks
to few existing compatibles. Neither devices with these existing
compatibles nor devices using fallbacks alone, have clocks, so the
"if:then:" block defining this constrain should be written as
"contains:".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Document compatible for the IPCC mailbox controller on SAR2130P platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The TI message manager driver can be compiled without ARCH_KEYSTONE
nor ARCH_K3 enabled. Allow it to be built under COMPILE_TEST.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
When OF support is disabled the of_device_id struct match table can be
conditionally compiled out, this helper allows the assignment to also be
turned into a NULL conditionally. When the of_device_id struct is not
conditionally defined based on OF then the table will be unused causing a
warning. The two options are to either set the table as _maybe_unused, or
to just remove this helper since the table will always be defined.
Do the latter here.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The qcom-cpucp mailbox irq is expected to function during suspend-resume
cycle particularly when the scmi cpufreq driver can query the current
frequency using the get_level message after the cpus are brought up during
resume. Hence mark the irq with IRQF_NO_SUSPEND flag to fix the do_xfer
failures we see during resume.
Err Logs:
arm-scmi firmware:scmi: timed out in resp(caller:do_xfer+0x164/0x568)
cpufreq: cpufreq_online: ->get() failed
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZtgFj1y5ggipgEOS@hovoldconsulting.com/
Fixes: 0e2a9a03106c ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
pm_runtime_put_autosuspend() will soon be changed to include a call to
pm_runtime_mark_last_busy(). This patch switches the current users to
__pm_runtime_put_autosuspend() which will continue to have the
functionality of old pm_runtime_put_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The two previous bindings for this hardware were incorrect, as the
control/status and interrupt register regions should have been described
as syscons and dealt with via regmap in the driver. Add support for
accessing these registers using that method now, so that the hwmon
driver can be supported without using auxdev or hacks with io_remap().
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
When the binding for this was originally written, and later modified,
mistakes were made - and the precise nature of the later modification
should have been a giveaway, but alas I was naive at the time.
A more correct modelling of the hardware is to use two syscons and have
a single reg entry for the mailbox, containing the mailbox region. The
two syscons contain the general control/status registers for the mailbox
and the interrupt related registers respectively. The reason for two
syscons is that the same mailbox is present on the non-SoC version of
the FPGA, which has no interrupt controller, and the shared part of the
rtl was unchanged between devices.
This is now coming to a head, because the control/status registers share
a register region with the "tvs" (temperature & voltage sensors)
registers and, as it turns out, people do want to monitor temperatures
and voltages...
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Remove Brendan Higgins <brendanhiggins@google.com> from i2c-aspeed entry
and replace with Ryan Chen <ryan_chen@aspeedtech.com>.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
In commit 35eba185fd1a ("i2c: designware: Calculate SCL timing parameter
for High Speed Mode") the SCL high period count and low period count for
high speed mode are calculated based on fixed tHIGH = 160 and tLOW = 120.
However, the set of two fixed values is only applicable to the combination
of hardware parameters IC_CAP_LOADING is 400 and IC_CLK_FREQ_OPTIMIZATION
is true. Outside of this combination, the SCL frequency may not reach
3.4 MHz because the fixed tHIGH and tLOW are not small enough.
If IC_CAP_LOADING is 400, it means the bus capacitance is 400pF;
Otherwise, 100 pF. If IC_CLK_FREQ_OPTIMIZATION is true, it means that the
hardware reduces its internal clock frequency by reducing the internal
latency required to generate the high period and low period of the SCL line.
Section 3.15.4.5 in DesignWare DW_apb_i2b Databook v2.03 says that when
IC_CLK_FREQ_OPTIMIZATION = 0,
MIN_SCL_HIGHtime = 60 ns for 3.4 Mbps, bus loading = 100pF
= 120 ns for 3.4 Mbps, bus loading = 400pF
MIN_SCL_LOWtime = 160 ns for 3.4 Mbps, bus loading = 100pF
= 320 ns for 3.4 Mbps, bus loading = 400pF
and section 3.15.4.6 says that when IC_CLK_FREQ_OPTIMIZATION = 1,
MIN_SCL_HIGHtime = 60 ns for 3.4 Mbps, bus loading = 100pF
= 160 ns for 3.4 Mbps, bus loading = 400pF
MIN_SCL_LOWtime = 120 ns for 3.4 Mbps, bus loading = 100pF
= 320 ns for 3.4 Mbps, bus loading = 400pF
In order to calculate more accurate SCL high period count and low period
count for high speed mode, two hardware parameters IC_CAP_LOADING and
IC_CLK_FREQ_OPTIMIZATION must be considered together. Since there're no
registers controlliing these these two hardware parameters, users can
declare them in the device tree so that the driver can obtain them.
Signed-off-by: Michael Wu <michael.wu@kneron.us>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
optimized
Since there are no registers controlling the hardware parameters
IC_CAP_LOADING and IC_CLK_FREQ_OPTIMIZATION, their values can only be
declared in the device tree.
snps,bus-capacitance-pf indicates the bus capacitance in picofarads (pF).
It affects the high and low pulse width of SCL line in high speed mode.
The legal values for this property are 100 and 400 only, and default
value is 100. This property corresponds to IC_CAP_LOADING.
snps,clk-freq-optimized indicates whether the hardware reduce its
internal clock frequency by reducing the internal latency required to
generate the high period and low period of SCL line. This property
corresponds to IC_CLK_FREQ_OPTIMIZATION.
The driver can calculate the high period count and low period count of
SCL line for high speed mode based on these two properties.
Signed-off-by: Michael Wu <michael.wu@kneron.us>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
- BRCR value must go into the BRCR1 field when in high-speed mode.
It goes into BRCR2 otherwise.
- Remove fallback to standard mode if priv->sm > I2C_FREQ_MODE_FAST.
- Set SM properly in probe; previously it only checked STANDARD versus
FAST. Now we set STANDARD, FAST, FAST_PLUS or HIGH_SPEED.
- Remove all comment sections saying we only support low-speeds.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Current BRCR computation is:
brcr = floor(i2cclk / (clkfreq * div))
With brcr: "baud rate counter", an internal clock divider,
and i2cclk: input clock rate (24MHz, 38.4MHz or 48MHz),
and clkfreq: desired bus rate,
and div: speed-mode dependent divider (2 for standard, 3 otherwise).
Assume i2cclk=48MHz, clkfreq=3.4MHz, div=3,
then brcr = floor(48MHz / (3.4MHz * 3)) = 4
and resulting bus rate = 48MHz / (4 * 3) = 4MHz
Assume i2cclk=38.4MHz, clkfreq=1.0MHz, div=3,
then brcr = floor(38.4MHz / (1.0MHz * 3)) = 12
and resulting bus rate = 38.4MHz / (12 * 3) = 1066kHz
The current computation means we always pick the smallest divider that
gives a bus rate above target. We should instead pick the largest
divider that gives a bus rate below target, using:
brcr = floor(i2cclk / (clkfreq * div)) + 1
If we redo the above examples:
Assume i2cclk=48MHz, clkfreq=3.4MHz, div=3,
then brcr = floor(48MHz / (3.4MHz * 3)) + 1 = 5
and resulting bus rate = 48MHz / (5 * 3) = 3.2MHz
Assume i2cclk=38.4MHz, clkfreq=1.0MHz, div=3,
then brcr = floor(38.4MHz / (1.0MHz * 3)) + 1 = 13
and resulting bus rate = 38.4MHz / (13 * 3) = 985kHz
In kernel C code, floor(x) is DIV_ROUND_DOWN() and,
floor(x)+1 is DIV_ROUND_UP().
This is much less of an issue with slower bus rates (ie those currently
supported), because the gap from one divider to the next is much
smaller. It however keeps us from always using bus rates superior to
the target.
This fix is required for later on supporting faster bus rates:
I2C_FREQ_MODE_FAST_PLUS (1MHz) and I2C_FREQ_MODE_HIGH_SPEED (3.4MHz).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add EyeQ6H support to the nmk-i2c AMBA driver. It shares the same quirk
as EyeQ5: the memory bus only supports 32-bit accesses. Avoid writeb()
and readb() by reusing the same `priv->has_32b_bus` flag.
It does NOT need to write speed-mode specific value into a register;
therefore it does not depend on the mobileye,olb DT property.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Compatible-specific behavior is implemented using a if-condition on the
return value from of_device_is_compatible(), from probe. It does not
scale well when compatible number increases. Switch to using a match
table and a call to of_match_device().
We DO NOT attach a .of_match_table field to our amba driver, as we do
not use the table to match our driver to devices.
Sort probe variable declarations in reverse christmas tree to try and
introduce some logic into the ordering.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Hardware is not limited to 400kHz, its documentation does mention how to
configure it for high-speed (a specific Speed-Mode enum value and
a different bus rate clock divider register to be used).
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
After EyeQ5, it is time for Mobileye EyeQ6H to reuse the Nomadik I2C
controller. Add a specific compatible because its HW integration is
slightly different from EyeQ5.
Do NOT add an example as it looks like EyeQ5 from a DT standpoint
(without the mobileye,olb property).
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The I2C controller IP used in the Allwinner A523/T527 SoCs is
compatible with the ones used in the other recent Allwinner SoCs.
Add the A523 specific compatible string to the list of existing names
falling back to the allwinner,sun8i-v536-i2c string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Enable DWAPB I2C controller support on FUJITSU-MONAKA.
This will be used in the FUJITSU-MONAKA server scheduled
for shipment in 2027.
The DSDT information obtained when verified using an
in-house simulator is presented below.
Device (SMB0)
{
Name (_HID, "FUJI200B") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
...
Name (_CRS, ResourceTemplate ()
{
Memory32Fixed (ReadWrite,
0x2A4B0000, // Address Base
0x00010000, // Address Length
)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x00000159,
}
})
...
}
The expression SMB0 is used to indicate SMBus HC#0,
a string of up to four characters.
Created the SMB0 object according to the following
specifications:
ACPI Specification
13.2. Accessing the SMBus from ASL Code
https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/13_ACPI_System_Mgmt_Bus_Interface_Spec/accessing-the-smbus-from-asl-code.html
IPMI Specification
Example 4: SSIF Interface(P574)
https://www.intel.co.jp/content/www/jp/ja/products/docs/servers/ipmi/ipmi-second-gen-interface-spec-v2-rev1-1.html
Signed-off-by: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
There's no reason for this driver to use OF-specific property helpers.
Drop the last one in favor of the generic variant and no longer include
of.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Piergiorgio reported a bug in bugzilla as below:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 969 at fs/f2fs/segment.c:1330
RIP: 0010:__submit_discard_cmd+0x27d/0x400 [f2fs]
Call Trace:
__issue_discard_cmd+0x1ca/0x350 [f2fs]
issue_discard_thread+0x191/0x480 [f2fs]
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
w/ below testcase, it can reproduce this bug quickly:
- pvcreate /dev/vdb
- vgcreate myvg1 /dev/vdb
- lvcreate -L 1024m -n mylv1 myvg1
- mount /dev/myvg1/mylv1 /mnt/f2fs
- dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=20
- sync
- rm /mnt/f2fs/file
- sync
- lvcreate -L 1024m -s -n mylv1-snapshot /dev/myvg1/mylv1
- umount /mnt/f2fs
The root cause is: it will update discard_max_bytes of mounted lvm
device to zero after creating snapshot on this lvm device, then,
__submit_discard_cmd() will pass parameter @nr_sects w/ zero value
to __blkdev_issue_discard(), it returns a NULL bio pointer, result
in panic.
This patch changes as below for fixing:
1. Let's drop all remained discards in f2fs_unfreeze() if snapshot
of lvm device is created.
2. Checking discard_max_bytes before submitting discard during
__submit_discard_cmd().
Cc: stable@vger.kernel.org
Fixes: 35ec7d574884 ("f2fs: split discard command in prior to block layer")
Reported-by: Piergiorgio Sartor <piergiorgio.sartor@nexgo.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219484
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Quoted:
"at this time, there are still 1086911 extent nodes in this zombie
extent tree that need to be cleaned up.
crash_arm64_sprd_v8.0.3++> extent_tree.node_cnt ffffff80896cc500
node_cnt = {
counter = 1086911
},
"
As reported by Xiuhong, there will be a huge number of extent nodes
in extent tree, it may potentially cause:
- slab memory fragments
- extreme long time shrink on extent tree
- low mapping efficiency
Let's add a sysfs node to limit max read extent count for each inode,
by default, value of this threshold is 10240, it can be updated
according to user's requirement.
Reported-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/20241112110627.1314632-1-xiuhong.wang@unisoc.com/
Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Incorrectly the hwmon with PMU name test didn't pass "true". Fix and
address issue with hwmon_pmu__config_terms needing to load events - a
load bearing assert fired. Also fix missing list deletion when putting
the hwmon test PMU and lower some debug warnings to make the hwmon PMU
less spammy in verbose mode.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241121000955.536930-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Non-zero values led to mismatches in testing. This was reproducible
with -fsanitize=undefined.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Closes: https://lore.kernel.org/lkml/Zzdtj0PEWEX3ATwL@x1/
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241119230033.115369-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In the error path when failing to parse events the evlist is being
deleted twice, keep the one after the out label.
Fixes: 531ee0fd4836994f ("perf test: Add hwmon "PMU" test")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/ZzzoJNNcJJVnPCCe@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
On s390 the perf test case ftrace sometimes fails as follows:
# ./perf test ftrace
79: perf ftrace tests : FAILED!
#
The failure depends on the kernel .config file. Some configurations
always work fine, some do not. The ftrace profile test mostly fails,
because the ring buffer was not large enough, and some lines
(especially the interesting ones with nanosleep in it) where dropped.
To achieve success for all tested kernel configurations, enlarge
the buffer to store the traces completely without wrapping.
The default buffer size is too small for all kernel configurations.
Set the buffer size of for the ftrace profile test to 16 MB.
Output after:
# ./perf test ftrace
79: perf ftrace tests : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20241119064856.641446-1-tmricht@linux.ibm.com
Suggested-by: Sven Schnelle <svens@linux.ibm.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Directly return -ENOMEM when pfi allocation fails,
instead of performing other operations on pfi.
Fixes: 0fe2b18ddc40 ("perf bpf-filter: Support multiple events properly")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: hao.ge@linux.dev
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20241113030537.26732-1-hao.ge@linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Use name to avoid potential other hwmon PMUs.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241118052638.754981-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Provide a guide for developers on how to debug code with a focus on the
media subsystem. This document aims to provide a rough overview over the
possibilities and a rational to help choosing the right tool for the
given circumstances.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241028-media_docs_improve_v3-v3-2-edf5c5b3746f@collabora.com
|
|
This idea was formed after noticing that new developers experience
certain difficulty to navigate within the multitude of different
debugging options in the Kernel and while there often is good
documentation for the tools, the developer has to know first that they
exist and where to find them.
Add a general debugging section to the Kernel documentation, as an
easily locatable entry point to other documentation and as a general
guideline for the topic.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241028-media_docs_improve_v3-v3-1-edf5c5b3746f@collabora.com
|
|
There are currently some doubts about out-of-tree kernel modules licensed
under GPLv3 and if they are supposed to be able to use symbols exported
using EXPORT_SYMBOL_GPL.
Clarify that "Proprietary" means anything non-GPL2 even though the
license might be an open source license. Also disambiguate "GPL
compatible" to "GPLv2 compatible".
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241115103842.585207-2-ukleinek@kernel.org
|
|
GFP_NOFS/GFP_NOIO
After the commit 451769ebb7e79 ("mm/vmalloc: alloc GFP_NO{FS,IO} for
vmalloc") in v5.17 it is now safe to use GFP_NOFS/GFP_NOIO flags
in [k]vmalloc, let's reflect it in documentation.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241119093922.567138-1-ptikhomirov@virtuozzo.com
|
|
Explain that a kernel-doc :identifiers: line can refer to a struct,
union, enum, or typedef as well as functions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241119203201.110953-1-rdunlap@infradead.org
|
|
Use proper spelling for 'discrete'. When at it, capitalize 'Linux',
which is common practice in the documentation.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241120-pwrseq-doc-trivial-fixes-v1-1-19a70f4dd156@gmail.com
|
|
Update references to most txt files to rst files.
Update one reference to an md file to a rst file.
Update one file path to its current location.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-fsdevel@vger.kernel.org
Cc: Ian Kent <raven@themaw.net>
Cc: autofs@vger.kernel.org
Cc: Alexander Aring <aahringo@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: gfs2@lists.linux.dev
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: fsverity@lists.linux.dev
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: ocfs2-devel@lists.linux.dev
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241120055246.158368-1-rdunlap@infradead.org
|
