summaryrefslogtreecommitdiffstats
path: root/tools/power (follow)
Commit message (Collapse)AuthorAgeFilesLines
* cpupower: Fix turbo frequency reporting for pre-Sandy Bridge coresBen Hutchings2017-04-131-0/+1
| | | | | | | | | | | | | The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both flags set and an assumed base clock of 100 MHz for turbo values. Reported-by: GSR <gsr.bugs@infernal-iceberg.com> Tested-by: GSR <gsr.bugs@infernal-iceberg.com> References: https://bugs.debian.org/859978 Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge branch 'turbostat' of ↵Rafael J. Wysocki2017-04-132-13/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat utility fixes for v4.11 from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number tools/power turbostat: fix impossibly large CPU%c1 value tools/power turbostat: turbostat.8 add missing column definitions tools/power turbostat: update HWP dump to decimal from hex tools/power turbostat: enable package THERM_INTERRUPT dump tools/power turbostat: show missing Core and GFX power on SKL and KBL tools/power turbostat: bugfix: GFXMHz column not changing
| * tools/power turbostat: update version numberLen Brown2017-04-131-1/+1
| | | | | | | | Signed-off-by: Len Brown <len.brown@intel.com>
| * tools/power turbostat: fix impossibly large CPU%c1 valueLen Brown2017-04-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most CPUs do not have a hardware c1 counter, and so turbostat derives c1 residency: c1 = TSC - MPERF - other_core_cstate_counters As it is not possible to atomically read these coutners, measurement jitter can case this calcuation to "go negative" when very close to 0. Turbostat detect that case and simply prints c1 = 0.00% But that check neglected to account for systems where the TSC crystal clock domain and the MPERF BCLK domain are differ by a small amount. That allowed very small negative c1 numbers to escape this check and be printed as huge positve numbers. This code begs for a bit of cleanup, but this patch is the minimal change to fix the issue. Signed-off-by: Len Brown <len.brown@intel.com>
| * tools/power turbostat: turbostat.8 add missing column definitionsDoug Smythies2017-04-131-0/+2
| | | | | | | | | | | | | | | | Add GFX%rc6 and GFXMHz to the column descriptions section of the turbostat man page. Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Len Brown <len.brown@intel.com>
| * tools/power turbostat: update HWP dump to decimal from hexLen Brown2017-04-131-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syntax only. The HWP CAPABILTIES and REQUEST ratios are more easily viewed in decimal -- just multiply by 100 and you get MHz... new: cpu0: MSR_HWP_CAPABILITIES: 0x010c1b23 (high 35 guar 27 eff 12 low 1) cpu0: MSR_HWP_REQUEST: 0x80002301 (min 1 max 35 des 0 epp 0x80 window 0x0 pkg 0x0) old: cpu0: MSR_HWP_CAPABILITIES: 0x010c1b23 (high 0x23 guar 0x1b eff 0xc low 0x1) cpu0: MSR_HWP_REQUEST: 0x80002301 (min 0x1 max 0x23 des 0x0 epp 0x80 window 0x0 pkg 0x0) Signed-off-by: Len Brown <len.brown@intel.com>
| * tools/power turbostat: enable package THERM_INTERRUPT dumpLen Brown2017-04-131-6/+2
| | | | | | | | | | | | | | | | | | | | | | cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C) cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884b0800 (25 C) cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C) Enable the same per-core output, but hide it behind --debug because it is too verbose on big systems. Signed-off-by: Len Brown <len.brown@intel.com>
| * tools/power turbostat: show missing Core and GFX power on SKL and KBLLen Brown2017-04-131-1/+3
| | | | | | | | | | | | | | | | While the current SDM is silent on the matter, the Core and GFX RAPL power meters on SKL and KBL appear to work -- so show them. Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * tools/power turbostat: bugfix: GFXMHz column not changingLen Brown2017-03-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | turbostat displays a GFXMHz column, which comes from reading /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz But GFXMHz was not changing, even when a manual cat /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz showed a new value. It turns out that a rewind() on the open file is not sufficient, fflush() (or a close/open) is needed to read fresh values. Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | Merge tag 'pm-turbostat-4.11-rc1' of ↵Linus Torvalds2017-03-032-582/+1551
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull turbostat utility updates from Rafael Wysocki: "Power management turbostat utility updates. These update turbostat significantly and in particular: - default output is now verbose, --debug is no longer required to get all counters. As a result, some options have been added to specify exactly what output is wanted. - added --quiet to skip system configuration output - added --list, --show and --hide parameters - added --cpu parameter - enhanced Baytrail SoC support - added Gemini Lake SoC support - added sysfs C-state columns Also the symbol definitions in arch/x86/include/asm/intel-family.h and arch/x86/include/asm/msr-index.h are updated and the intel_idle and intel_pstate drivers are modified to use the updated symbols. Credits to Len Brown for all of these changes" * tag 'pm-turbostat-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits) tools/power turbostat: version 17.02.24 tools/power turbostat: bugfix: --add u32 was printed as u64 tools/power turbostat: show error on exec tools/power turbostat: dump p-state software config tools/power turbostat: show package number, even without --debug tools/power turbostat: support "--hide C1" etc. tools/power turbostat: move --Package and --processor into the --cpu option tools/power turbostat: turbostat.8 update tools/power turbostat: update --list feature tools/power turbostat: use wide columns to display large numbers tools/power turbostat: Add --list option to show available header names tools/power turbostat: fix zero IRQ count shown in one-shot command mode tools/power turbostat: add --cpu parameter tools/power turbostat: print sysfs C-state stats tools/power turbostat: extend --add option to accept /sys path tools/power turbostat: skip unused counters on BDX tools/power turbostat: fix decoding for GLM, DNV, SKX turbo-ratio limits tools/power turbostat: skip unused counters on SKX tools/power turbostat: Denverton: use HW CC1 counter, skip C3, C7 tools/power turbostat: initial Gemini Lake SOC support ...
| * | Merge branch 'turbostat' of ↵Rafael J. Wysocki2017-03-012-582/+1551
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull changes related to turbostat for v4.11 from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (44 commits) tools/power turbostat: version 17.02.24 tools/power turbostat: bugfix: --add u32 was printed as u64 tools/power turbostat: show error on exec tools/power turbostat: dump p-state software config tools/power turbostat: show package number, even without --debug tools/power turbostat: support "--hide C1" etc. tools/power turbostat: move --Package and --processor into the --cpu option tools/power turbostat: turbostat.8 update tools/power turbostat: update --list feature tools/power turbostat: use wide columns to display large numbers tools/power turbostat: Add --list option to show available header names tools/power turbostat: fix zero IRQ count shown in one-shot command mode tools/power turbostat: add --cpu parameter tools/power turbostat: print sysfs C-state stats tools/power turbostat: extend --add option to accept /sys path tools/power turbostat: skip unused counters on BDX tools/power turbostat: fix decoding for GLM, DNV, SKX turbo-ratio limits tools/power turbostat: skip unused counters on SKX tools/power turbostat: Denverton: use HW CC1 counter, skip C3, C7 tools/power turbostat: initial Gemini Lake SOC support ...
| | * tools/power turbostat: version 17.02.24Len Brown2017-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The turbostat before this last set of changes is obsolete. This new version can do a lot more, but it also has some different defaults, that might catch some off-guard. So it seems a good time to give a new version number. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: bugfix: --add u32 was printed as u64Len Brown2017-03-011-19/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the "u32" keyword is used with --add, it means that the output should be truncated to 32-bits. This was not happening and all 64-bits were printed. Also, when no column name was used for an added MSR, The default column name was in deximal, eg. MSR16. Users report that they tend to use hex MSR numbers, so print them in hex. To always fit into the columns, use the syntax M0x10. Note that the user can always supply any column header that they want. eg --add msr0x10,MY_TSC Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: show error on execLen Brown2017-03-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When turbostat is run in one-shot command mode, the parent takes the 'before' counter snapshot, fork/exec/wait for the child to exit, takes the 'after' counter snapshot, and prints the results. however, if the child fails to exec the command, it immediately returns, without indicating that anythign was wrong. Add an error message showing that exec failed: sudo turbostat sleeeep 4 ... turbostat: exec sleeeep: No such file or directory ... Note that the parent will still print out the statistics, because it can't tell the difference between the failed exec and a command that is purposefully returning the same status. Unfortunately, this may obscure the error message. However, if the --out parameter is used, the error message is evident on stderr. Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: dump p-state software configLen Brown2017-03-011-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cpu1: cpufreq driver: acpi-cpufreq cpu1: cpufreq governor: ondemand cpufreq boost: 1 or cpu0: cpufreq driver: intel_pstate cpu0: cpufreq governor: powersave cpufreq intel_pstate no_turbo: 0 Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: show package number, even without --debugLen Brown2017-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | On multi-package systems, the "Package" column was being displayed only if --debug was used. Show it always. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: support "--hide C1" etc.Len Brown2017-03-012-44/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally, the only way to hide the sysfs C-state statistics columns was with "--hide sysfs". This was because we process "--hide" before we probe for those columns. hack --hide to remember deferred hide requests, and apply them when sysfs is probed. "--hide sysfs" is still available as short-hand to refer to the entire group of counters. The down-side of this change is that we no longer error check for bogus --hide column names. But the user will quickly figure that out if a column they mean to hide is still there... Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: move --Package and --processor into the --cpu optionLen Brown2017-03-012-16/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | --Package is now "--cpu package", which will display just the 1st CPU in each package --processor is not "--cpu core" which will display just the 1st CPU in each core Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: turbostat.8 updateLen Brown2017-03-011-98/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | update examples to show recently updated features. In particular --add --show --hide --cpu --list Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: update --list featureLen Brown2017-03-011-106/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make it possible to take the entire un-edited output from `turbostat --list` and feed it to "turbostat --show" or "turbostat --hide". To do this, the leading comma was removed (no mater what columns are active) and also they dynamic C-state "C1, C2, C3" etc are replaced by the string "sysfs", which refers to them as a group. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: use wide columns to display large numbersLen Brown2017-03-011-13/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a counter overlfows 7 columns, it shifts the remaining columns to the right, so they no longer line up under their column header. Update turbostat to dectect when it is handling large numbers, and switch to wider columns where, necessary. Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: Add --list option to show available header namesLen Brown2017-03-011-52/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is handy to know the list of column header names, so that they can be used with --add and --skip The new --list option shows them: sudo ./turbostat --list --hide sysfs ,Core,CPU,Avg_MHz,Busy%,Bzy_MHz,TSC_MHz,IRQ,SMI,CPU%c1,CPU%c3,CPU%c6,CPU%c7,CoreTmp,PkgTmp,GFX%rc6,GFXMHz,PkgWatt,CorWatt,GFXWatt Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: fix zero IRQ count shown in one-shot command modeLen Brown2017-03-011-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | The IRQ column has been working for periodic mode, but not in one-shot command mode, it shows only 0. until now. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: add --cpu parameterLen Brown2017-03-012-2/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the --cpu parameter, turbostat prints only lines for the specified set of CPUs: sudo ./turbostat --quiet --show Core,CPU --cpu 0,1,3..5,6-7 Core CPU - - 0 0 0 4 1 1 1 5 2 6 3 3 3 7 Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: print sysfs C-state statsLen Brown2017-03-012-18/+147
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When turbostat shows % of time in a CPU idle power state, it has always been showing information from underlying hardware residency counters. While this reflects what the hardware is doing, and is thus useful for understanding the hardware, it doesn't directly tell us what Linux requested -- which is useful for tuning Linux itself. Here we add columns to turbostat to show the Linux cpuidle sub-system statistics: /sys/devices/system/cpu/cpu*/cpuidle/state*/* The first group of columns are the "usage", which is the number of times software requested that C-state in the measurement interval. eg C1 below. The second group of columns are the "time", which is the percentage of the measurement interval time that software has requested the specified C-state. eg C1% below. These software counters can be compared to the underlying hardware residency counters (eg CPU%c1 CPU%c3 CPU%c6 CPU%c7) to compare what sofware requested to what the hardware delivered. These sysfs attributes are discovered when turbostat starts, rather than being "built in". So the --show and --hide parameters do not know about these dynamic column names. However "--show sysfs" and "--hide sysfs" act on the entire group of columns: turbostat --show sysfs ... cpu4: POLL: CPUIDLE CORE POLL IDLE cpu4: C1: MWAIT 0x00 cpu4: C1E: MWAIT 0x01 cpu4: C3: MWAIT 0x10 cpu4: C6: MWAIT 0x20 cpu4: C7s: MWAIT 0x32 ... C1 C1E C3 C6 C7s C1% C1E% C3% C6% C7s% 3 6 5 1 188 0.00 0.02 0.00 0.00 99.93 0 6 5 0 58 0.00 0.16 0.02 0.00 99.70 0 0 0 0 9 0.00 0.00 0.00 0.00 99.96 0 0 0 1 24 0.00 0.00 0.00 0.02 99.93 0 0 0 0 9 0.00 0.00 0.00 0.00 99.97 0 0 0 0 32 0.00 0.00 0.00 0.00 99.96 0 0 0 0 7 0.00 0.00 0.00 0.00 99.98 2 0 0 0 36 0.00 0.00 0.00 0.00 99.97 1 0 0 0 13 0.00 0.00 0.00 0.00 99.98 Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: extend --add option to accept /sys pathLen Brown2017-03-011-23/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, the --add option could specify only an MSR. Here is is extended so an arbitrary /sys attribute, as specified by an absolute file path name. sudo ./turbostat --add /sys/devices/system/cpu/cpu0/cpuidle/state5/usage Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: skip unused counters on BDXLen Brown2017-03-011-0/+17
| | | | | | | | | | | | | | | | | | | | | Skip these two counters on BDX, as they are always zero: cc7, pc7 Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: fix decoding for GLM, DNV, SKX turbo-ratio limitsLen Brown2017-03-011-23/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer processors do not hard-code the the number of cpus in each bin to {1, 2, 3, 4, 5, 6, 7, 8} Rather, they can specify any number of CPUS in each of the 8 bins: eg. ... 37 * 100.0 = 3600.0 MHz max turbo 4 active cores 38 * 100.0 = 3700.0 MHz max turbo 3 active cores 39 * 100.0 = 3800.0 MHz max turbo 2 active cores 39 * 100.0 = 3900.0 MHz max turbo 1 active cores could now look something like this: ... 37 * 100.0 = 3600.0 MHz max turbo 16 active cores 38 * 100.0 = 3700.0 MHz max turbo 8 active cores 39 * 100.0 = 3800.0 MHz max turbo 4 active cores 39 * 100.0 = 3900.0 MHz max turbo 2 active cores Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: skip unused counters on SKXLen Brown2017-03-011-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | Skip these four counters on SKX, as they are always zero: cc3, pc3 cc7, pc7 Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: Denverton: use HW CC1 counter, skip C3, C7Len Brown2017-03-011-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CC1 column in tubostat can be computed by subtracting the core c-state residency countes from the total Cx residency. CC1 = (Idle_time_as_measured by MPERF) - (all core C-states with residency counters) However, as the underlying counter reads are not atomic, error can be noticed in this calculations, especially when the numbers are small. Denverton has a hardware CC1 residency counter to improve the accuracy of the cc1 statistic -- use it. At the same time, Denverton has no concept of CC3, PC3, CC7, PC7, so skip collecting and printing those columns. Finally, a note of clarification. Turbostat prints the standard PC2 residency counter, but on Denverton hardware, that actually means PC1E. Turbostat prints the standard PC6 residency counter, but on Denverton hardware, that actually means PC2. At this point, we document that differnce in this commit message, rather than adding a quirk to the software. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: initial Gemini Lake SOC supportLen Brown2017-03-011-0/+5
| | | | | | | | | | | | | | | | | | Gemini Lake is similar to Apollo Lake (Broxton/Goldmont) Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: bug fixes to --add, --show/--hide featuresLen Brown2017-03-011-61/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a bug with --add, where the title of the column is un-initialized if not specified by the user. The initial implementation of --show and --hide neglected to handle the pc8/pc9/pc10 counters. Fix a bug where "--show Core" only worked with --debug Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: use tsc_tweak everwhere it is neededLen Brown2017-03-011-23/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CPU ticks at a rate in the "bus clock" domain. eg. 100 MHz * bus_ratio. On newer processors, the TSC has been moved out of this BCLK domain and into a separate crystal-clock domain. While the TSC ticks "close to" the base frequency, those that look closely at the numbers will notice small errors in calculations that mix units of TSC clocks and bus clocks. "tsc_tweak" was introduced to address the most visible mixing -- the %Busy and the the Busy_MHz calculations. (A simplification as since removed TSC from the BusyMHz calculation) Here we apply the tsc_tweak to everyplace where BCLK and TSC units are mixed. The results is that on a system which is 100% idle, the sum of the C-states are now much more likely to be closer to 100%. Reported-by: Travis Downs <travis.downs@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: print system config, unless --quietLen Brown2017-03-012-60/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some users want turbostat to tell them everything, by default. Some users want turbostat to be quiet, by default. I find that I'm in the 1st camp, and so I've never liked needing to type the --debug parameter to decode the system configuration. So here we change the default and print the system configuration, by default. (The --debug option is now un-documented, though it does still exist for debugging turbostat internals) When you do not want to see the system configuration header, use the new "--quiet" option. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: show all columns, independent of --debugLen Brown2017-03-011-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some time ago, turbostat overflowed 80 columns. So on the assumption that a "casual" user would always want topology and frequency columns, we hid the rest of the columns and the system configuration decoding behind the --debug option. Not everybody liked that change -- including me. I use --debug 99% of the time... Well, now we have "-o file" to put turbostat output into a file, so unless you are watching real-time in a small window, column count is less frequently a factor. And more recently, we got the "--hide columnA,columnB" option to specify columns to skip. So now we "un-hide" the rest of the columns from behind --debug, and show them all, by default. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: decode MSR_MISC_FEATURE_CONTROLLen Brown2017-03-011-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | useful for observing if the BIOS disabled prefetch Not architectural, but docuemented as present on NHM, SNB and is present on others. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: decode CPUID(6).TURBOLen Brown2017-03-011-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | show the CPUID feature for turbo to clarify the case when it may not be shown in MISC_ENABLE CPUID(6): APERF, TURBO, DTS, PTM, No-HWP, No-HWPnotify, No-HWPwindow, No-HWPepp, No-HWPpkg, EPB cpu4: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT TURBO) Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: dump Atom P-states correctlyLen Brown2017-03-011-21/+82
| | | | | | | | | | | | | | | | | | | | | | | | Turbostat dumps MSR_TURBO_RATIO_LIMIT on Core Architecture. But Atom Architecture uses MSR_ATOM_CORE_RATIOS and MSR_ATOM_CORE_TURBO_RATIOS. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: further decode MSR_IA32_MISC_ENABLELen Brown2017-03-011-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Decode MISC_ENABLE.NO_TURBO, also use the #defines in msr-index.h for decoding this register cpu0: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT TURBO) Although it is not architectural, decode also MSR_IA32_MISC_ENABLE.prefetch-disable (bit-9). documented to be present on: Core, P4, Intel-Xeon reserved on: Atom, Silvermont, Nehalem, SNB, PHI ec. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: add precision to --debug frequency outputLen Brown2017-03-011-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a digit of precision to the --debug output for frequency range. This is useful when BCLK is not an integer. old: 6 * 83 = 500 MHz max efficiency frequency 26 * 83 = 2166 MHz base frequency new: 6 * 83.3 = 499.8 MHz max efficiency frequency 26 * 83.3 = 2165.8 MHz base frequency Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: Baytrail c-state supportLen Brown2017-03-011-9/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Baytrail SOC, with its Silvermont core, has some unique properties: 1. a hardware CC1 residency counter 2. a module-c6 residency counter 3. a package-c6 counter at traditional package-c7 counter address. The SOC does not support c3, pc3, c7 or pc7 counters. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: use new name for MSR_PKG_CST_CONFIG_CONTROLLen Brown2017-03-011-5/+5
| | | | | | | | | | | | | | | | | | Previously called MSR_NHM_SNB_PKG_CST_CFG_CTL Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: update MSR_PKG_CST_CONFIG_CONTROL decodingLen Brown2017-02-251-1/+1
| | | | | | | | | | | | | | | | | | AMT value 0 is unlimited, not PC0 Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: Baytrail: remove debug line in quiet modeLen Brown2017-02-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Without --debug, a debug line was printed on Baytrail: SLM BCLK: 83.3 Mhz Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: decode Baytrail CC6 and MC6 demotion configurationLen Brown2017-02-251-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with --debug, see: cpu0: MSR_CC6_DEMOTION_POLICY_CONFIG: 0x00000000 (DISable-CC6-Demotion) cpu0: MSR_MC6_DEMOTION_POLICY_CONFIG: 0x00000000 (DISable-MC6-Demotion) Note that the hardware default is to enable demotion, and Linux started clearing these registers in 3.17. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: BYT does not have MSR_MISC_PWR_MGMTLen Brown2017-02-251-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and so --debug fails with: turbostat: msr 1 offset 0x1aa read failed: Input/output error It seems that baytrail, and airmont do not have this MSR. It is included in subsequent Goldmont Atom. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: Add --show and --hide parametersLen Brown2017-02-252-120/+347
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the "--show" and "--hide" cmdline parameters. By default, turbostat shows all columns. turbostat --hide counter_list will continue showing all columns, except for those listed. turbostat --show counter_list will show _only_ the listed columns These features work for built-in counters, and have no effect on columns added with the --add parameter. Signed-off-by: Len Brown <len.brown@intel.com>
| | * tools/power turbostat: fix bugs in --add optionLen Brown2017-02-251-36/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When --add was used more than once, overflowed buffers caused some counters to be stored on top of others, corrupting the results. Simplify the code by simply reserving space for up to 16 added counters per each cpu, core, package. Per-cpu added counters were being printed only per-core. Signed-off-by: Len Brown <len.brown@intel.com>
* | | Merge tag 'linux-kselftest-4.11-rc1' of ↵Linus Torvalds2017-02-261-9/+12
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest update from Shuah Khan: "This update consists of: - fixes to several existing tests from Stafford Horne - cpufreq tests from Viresh Kumar - Selftest build and install fixes from Bamvor Jian Zhang and Michael Ellerman - Fixes to protection-keys tests from Dave Hansen - Warning fixes from Shuah Khan" * tag 'linux-kselftest-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits) selftests/powerpc: Fix remaining fallout from recent changes selftests/powerpc: Fix the clean rule since recent changes selftests: Fix the .S and .S -> .o rules selftests: Fix the .c linking rule selftests: Fix selftests build to just build, not run tests selftests, x86, protection_keys: fix wrong offset in siginfo selftests, x86, protection_keys: fix uninitialized variable warning selftest: cpufreq: Update MAINTAINERS file selftest: cpufreq: Add special tests selftest: cpufreq: Add support to test cpufreq modules selftest: cpufreq: Add suspend/resume/hibernate support selftest: cpufreq: Add support for cpufreq tests selftests: Add intel_pstate to TARGETS selftests/intel_pstate: Update makefile to match new style selftests/intel_pstate: Fix warning on loop index overflow cpupower: Restore format of frequency-info limit selftests/futex: Add headers to makefile dependencies selftests/futex: Add stdio used for logging selftests: x86 protection_keys remove dead code selftests: x86 protection_keys fix unused variable compile warnings ...
| * | | cpupower: Restore format of frequency-info limitStafford Horne2017-01-191-9/+12
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The intel_pstate kselftest expects that the output of `cpupower frequency-info -l | tail -1 | awk ' { print $1 } '` to get frequency limits. This does not work after the following two changes. - 562e5f1a3: rework the "cpupower frequency-info" command (Jacob Tanenbaum) removed parsable limit output - ce512b840: Do not analyse offlined cpus (Thomas Renninger) added newline to break limit parsing more This change preserves human readable output if wanted as well as parsable output for scripts/tests. Cc: Thomas Renninger <trenn@suse.com> Cc: "Shreyas B. Prabhu" <shreyas@linux.vnet.ibm.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: linux-pm@vger.kernel.org Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 08:21:45 +0100