summaryrefslogtreecommitdiffstats
path: root/virt (follow)
Commit message (Collapse)AuthorAgeFilesLines
* KVM: Consolidate arch specific vcpu ioctl lockingAvi Kivity2010-08-011-2/+0
| | | | | | | Now that all arch specific ioctls have centralized locking, it is easy to move it to the central dispatcher. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: move vcpu locking to dispatcher for generic vcpu ioctlsAvi Kivity2010-08-011-0/+15
| | | | | | | | | All vcpu ioctls need to be locked, so instead of locking each one specifically we lock at the generic dispatcher. This patch only updates generic ioctls and leaves arch specific ioctls alone. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: remove CAP_SYS_RAWIO requirement from kvm_vm_ioctl_assign_irqAlex Williamson2010-08-011-3/+0
| | | | | | | | | | | Remove this check in an effort to allow kvm guests to run without root privileges. This capability check doesn't seem to add any security since the device needs to have already been added via the assign device ioctl and the io actually occurs through the pci sysfs interface. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: Avoid killing userspace through guest SRAO MCE on unmapped pagesHuang Ying2010-08-011-2/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | In common cases, guest SRAO MCE will cause corresponding poisoned page be un-mapped and SIGBUS be sent to QEMU-KVM, then QEMU-KVM will relay the MCE to guest OS. But it is reported that if the poisoned page is accessed in guest after unmapping and before MCE is relayed to guest OS, userspace will be killed. The reason is as follows. Because poisoned page has been un-mapped, guest access will cause guest exit and kvm_mmu_page_fault will be called. kvm_mmu_page_fault can not get the poisoned page for fault address, so kernel and user space MMIO processing is tried in turn. In user MMIO processing, poisoned page is accessed again, then userspace is killed by force_sig_info. To fix the bug, kvm_mmu_page_fault send HWPOISON signal to QEMU-KVM and do not try kernel and user space MMIO processing for poisoned page. [xiao: fix warning introduced by avi] Reported-by: Max Asbock <masbock@linux.vnet.ibm.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: read apic->irr with ioapic lock heldMarcelo Tosatti2010-06-101-1/+2
| | | | | | | Read ioapic->irr inside ioapic->lock protected section. KVM-Stable-Tag Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: Fix order passed to iommu_unmapJan Kiszka2010-06-091-1/+1
| | | | | | | | | | This is obviously a left-over from the the old interface taking the size. Apparently a mostly harmless issue with the current iommu_unmap implementation. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* Merge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2010-05-224-38/+43
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (269 commits) KVM: x86: Add missing locking to arch specific vcpu ioctls KVM: PPC: Add missing vcpu_load()/vcpu_put() in vcpu ioctls KVM: MMU: Segregate shadow pages with different cr0.wp KVM: x86: Check LMA bit before set_efer KVM: Don't allow lmsw to clear cr0.pe KVM: Add cpuid.txt file KVM: x86: Tell the guest we'll warn it about tsc stability x86, paravirt: don't compute pvclock adjustments if we trust the tsc x86: KVM guest: Try using new kvm clock msrs KVM: x86: export paravirtual cpuid flags in KVM_GET_SUPPORTED_CPUID KVM: x86: add new KVMCLOCK cpuid feature KVM: x86: change msr numbers for kvmclock x86, paravirt: Add a global synchronization point for pvclock x86, paravirt: Enable pvclock flags in vcpu_time_info structure KVM: x86: Inject #GP with the right rip on efer writes KVM: SVM: Don't allow nested guest to VMMCALL into host KVM: x86: Fix exception reinjection forced to true KVM: Fix wallclock version writing race KVM: MMU: Don't read pdptrs with mmu spinlock held in mmu_alloc_roots KVM: VMX: enable VMXON check with SMX enabled (Intel TXT) ...
| * KVM: Let vcpu structure alignment be determined at runtimeAvi Kivity2010-05-191-3/+4
| | | | | | | | | | | | | | vmx and svm vcpus have different contents and therefore may have different alignmment requirements. Let each specify its required alignment. Signed-off-by: Avi Kivity <avi@redhat.com>
| * KVM: Remove test-before-set optimization for dirty bitsTakuya Yoshikawa2010-05-171-3/+1
| | | | | | | | | | | | | | | | | | | | As Avi pointed out, testing bit part in mark_page_dirty() was important in the days of shadow paging, but currently EPT and NPT has already become common and the chance of faulting a page more that once per iteration is small. So let's remove the test bit to avoid extra access. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
| * KVM: do not call hardware_disable() on CPU_UP_CANCELEDLai Jiangshan2010-05-171-5/+0
| | | | | | | | | | | | | | | | | | | | | | When CPU_UP_CANCELED, hardware_enable() has not been called at the CPU which is going up because raw_notifier_call_chain(CPU_ONLINE) has not been called for this cpu. Drop the handling for CPU_UP_CANCELED. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
| * KVM: use the correct RCU API for PROVE_RCU=yLai Jiangshan2010-05-172-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RCU/SRCU API have already changed for proving RCU usage. I got the following dmesg when PROVE_RCU=y because we used incorrect API. This patch coverts rcu_deference() to srcu_dereference() or family API. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by qemu-system-x86/8550: #0: (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm] #1: (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm] stack backtrace: Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27 Call Trace: [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm] [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm] [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm] [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm] [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel] [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm] [<ffffffff810a8692>] ? unlock_page+0x27/0x2c [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm] [<ffffffff81060cfa>] ? up_read+0x23/0x3d [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a [<ffffffff810021db>] system_call_fastpath+0x16/0x1b Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
| * KVM: limit the number of pages per memory slotTakuya Yoshikawa2010-05-171-5/+6
| | | | | | | | | | | | | | | | This patch limits the number of pages per memory slot to make us free from extra care about type issues. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * KVM: coalesced_mmio: fix kvm_coalesced_mmio_init()'s error handlingTakuya Yoshikawa2010-05-172-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kvm_coalesced_mmio_init() keeps to hold the addresses of a coalesced mmio ring page and dev even after it has freed them. Also, if this function fails, though it might be rare, it seems to be suggesting the system's serious state: so we'd better stop the works following the kvm_creat_vm(). This patch clears these problems. We move the coalesced mmio's initialization out of kvm_create_vm(). This seems to be natural because it includes a registration which can be done only when vm is successfully created. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * KVM: fix assigned_device_enable_host_msix error handlingjing zhang2010-05-171-2/+6
| | | | | | | | | | | | | | | | Free IRQ's and disable MSIX upon failure. Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Jing Zhang <zj.barak@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * KVM: fix the errno of ioctl KVM_[UN]REGISTER_COALESCED_MMIO failureWei Yongjun2010-05-172-4/+2
| | | | | | | | | | | | | | | | This patch change the errno of ioctl KVM_[UN]REGISTER_COALESCED_MMIO from -EINVAL to -ENXIO if no coalesced mmio dev exists. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * KVM: cleanup kvm traceXiao Guangrong2010-05-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | This patch does: - no need call tracepoint_synchronize_unregister() when kvm module is unloaded since ftrace can handle it - cleanup ftrace's macro Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
| * KVM: update gfn_to_hva() to use gfn_to_hva_memslot()Takuya Yoshikawa2010-04-251-6/+6
| | | | | | | | | | | | | | | | | | | | Marcelo introduced gfn_to_hva_memslot() when he implemented gfn_to_pfn_memslot(). Let's use this for gfn_to_hva() too. Note: also remove parentheses next to return as checkpatch said to do. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
* | Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds2010-05-181-22/+91
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Add amd_iommu=off command line option iommu-api: Remove iommu_{un}map_range functions x86/amd-iommu: Implement ->{un}map callbacks for iommu-api x86/amd-iommu: Make amd_iommu_iova_to_phys aware of multiple page sizes x86/amd-iommu: Make iommu_unmap_page and fetch_pte aware of page sizes x86/amd-iommu: Make iommu_map_page and alloc_pte aware of page sizes kvm: Change kvm_iommu_map_pages to map large pages VT-d: Change {un}map_range functions to implement {un}map interface iommu-api: Add ->{un}map callbacks to iommu_ops iommu-api: Add iommu_map and iommu_unmap functions iommu-api: Rename ->{un}map function pointers to ->{un}map_range
| * \ Merge branch 'iommu/largepages' into amd-iommu/2.6.35Joerg Roedel2010-05-111-22/+91
| |\ \ | | |/ | |/| | | | | | | Conflicts: arch/x86/kernel/amd_iommu.c
| | * kvm: Change kvm_iommu_map_pages to map large pagesJoerg Roedel2010-03-071-22/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the implementation of of kvm_iommu_map_pages to map the pages with the host page size into the io virtual address space. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Acked-By: Avi Kivity <avi@redhat.com>
* | | KVM: convert ioapic lock to spinlockMarcelo Tosatti2010-05-132-16/+16
|/ / | | | | | | | | | | | | | | | | kvm_set_irq is used from non sleepable contexes, so convert ioapic from mutex to spinlock. KVM-Stable-Tag. Tested-by: Ralf Bonenkamp <ralf.bonenkamp@swyx.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* | KVM: Add missing srcu_read_lock() for kvm_mmu_notifier_release()Lai Jiangshan2010-04-211-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I got this dmesg due to srcu_read_lock() is missing in kvm_mmu_notifier_release(). =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- arch/x86/kvm/x86.h:72 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by qemu-system-x86/3100: #0: (rcu_read_lock){.+.+..}, at: [<ffffffff810d73dc>] __mmu_notifier_release+0x38/0xdf #1: (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa0130a6a>] kvm_mmu_zap_all+0x21/0x5e [kvm] stack backtrace: Pid: 3100, comm: qemu-system-x86 Not tainted 2.6.34-rc3-22949-gbc8a97a-dirty #2 Call Trace: [<ffffffff8106afd9>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffffa0123a89>] unalias_gfn+0x56/0xab [kvm] [<ffffffffa0119600>] gfn_to_memslot+0x16/0x25 [kvm] [<ffffffffa012ffca>] gfn_to_rmap+0x17/0x6e [kvm] [<ffffffffa01300c1>] rmap_remove+0xa0/0x19d [kvm] [<ffffffffa0130649>] kvm_mmu_zap_page+0x109/0x34d [kvm] [<ffffffffa0130a7e>] kvm_mmu_zap_all+0x35/0x5e [kvm] [<ffffffffa0122870>] kvm_arch_flush_shadow+0x16/0x22 [kvm] [<ffffffffa01189e0>] kvm_mmu_notifier_release+0x15/0x17 [kvm] [<ffffffff810d742c>] __mmu_notifier_release+0x88/0xdf [<ffffffff810d73dc>] ? __mmu_notifier_release+0x38/0xdf [<ffffffff81040848>] ? exit_mm+0xe0/0x115 [<ffffffff810c2cb0>] exit_mmap+0x2c/0x17e [<ffffffff8103c472>] mmput+0x2d/0xd4 [<ffffffff81040870>] exit_mm+0x108/0x115 [...] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* | KVM: fix the handling of dirty bitmaps to avoid overflowsTakuya Yoshikawa2010-04-201-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Int is not long enough to store the size of a dirty bitmap. This patch fixes this problem with the introduction of a wrapper function to calculate the sizes of dirty bitmaps. Note: in mark_page_dirty(), we have to consider the fact that __set_bit() takes the offset as int, not long. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-306-1/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* KVM: Convert kvm->requests_lock to raw_spinlock_tAvi Kivity2010-03-011-3/+3
| | | | | | | | The code relies on kvm->requests_lock inhibiting preemption. Noted by Jan Kiszka. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: do not store wqh in irqfdMichael S. Tsirkin2010-03-011-3/+0
| | | | | | | wqh is unused, so we do not need to store it in irqfd anymore Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: cleanup the failure path of KVM_CREATE_IRQCHIP ioctrlWei Yongjun2010-03-012-0/+12
| | | | | | | | | If we fail to init ioapic device or the fail to setup the default irq routing, the device register by kvm_create_pic() and kvm_ioapic_init() remain unregister. This patch fixed to do this. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: kvm->arch.vioapic should be NULL if kvm_ioapic_init() failureWei Yongjun2010-03-011-1/+3
| | | | | | | | kvm->arch.vioapic should be NULL in case of kvm_ioapic_init() failure due to cannot register io dev. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Fix Codestyle in virt/kvm/coalesced_mmio.cJochen Maes2010-03-011-2/+2
| | | | | | | Fixed 2 codestyle issues in virt/kvm/coalesced_mmio.c Signed-off-by: Jochen Maes <jochen.maes@sejo.be> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Introduce kvm_host_page_sizeJoerg Roedel2010-03-011-0/+25
| | | | | | | | | | This patch introduces a generic function to find out the host page size for a given gfn. This function is needed by the kvm iommu code. This patch also simplifies the x86 host_mapping_level function. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: enable PCI multiple-segments for pass-through deviceZhai, Edwin2010-03-012-4/+9
| | | | | | | | | Enable optional parameter (default 0) - PCI segment (or domain) besides BDF, when assigning PCI device to guest. Signed-off-by: Zhai Edwin <edwin.zhai@intel.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: Fix kvm_coalesced_mmio_ring duplicate allocationSheng Yang2010-03-011-17/+0
| | | | | | | | | The commit 0953ca73 "KVM: Simplify coalesced mmio initialization" allocate kvm_coalesced_mmio_ring in the kvm_coalesced_mmio_init(), but didn't discard the original allocation... Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: fix cleanup_srcu_struct on vm destructionMarcelo Tosatti2010-03-011-1/+0
| | | | | | | | | | | | | | | | | | | cleanup_srcu_struct on VM destruction remains broken: BUG: unable to handle kernel paging request at ffffffffffffffff IP: [<ffffffff802533d2>] srcu_read_lock+0x16/0x21 RIP: 0010:[<ffffffff802533d2>] [<ffffffff802533d2>] srcu_read_lock+0x16/0x21 Call Trace: [<ffffffffa05354c4>] kvm_arch_vcpu_uninit+0x1b/0x48 [kvm] [<ffffffffa05339c6>] kvm_vcpu_uninit+0x9/0x15 [kvm] [<ffffffffa0569f7d>] vmx_free_vcpu+0x7f/0x8f [kvm_intel] [<ffffffffa05357b5>] kvm_arch_destroy_vm+0x78/0x111 [kvm] [<ffffffffa053315b>] kvm_put_kvm+0xd4/0xfe [kvm] Move it to kvm_arch_destroy_vm. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
* KVM: avoid taking ioapic mutex for non-ioapic EOIsAvi Kivity2010-03-012-0/+20
| | | | | | | | | | | | | | | | | When the guest acknowledges an interrupt, it sends an EOI message to the local apic, which broadcasts it to the ioapic. To handle the EOI, we need to take the ioapic mutex. On large guests, this causes a lot of contention on this mutex. Since large guests usually don't route interrupts via the ioapic (they use msi instead), this is completely unnecessary. Avoid taking the mutex by introducing a handled_vectors bitmap. Before taking the mutex, check if the ioapic was actually responsible for the acked vector. If not, we can return early. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: convert slots_lock to a mutexMarcelo Tosatti2010-03-014-19/+19
| | | | Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: convert io_bus to SRCUMarcelo Tosatti2010-03-014-49/+73
| | | | Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: x86: switch kvm_set_memory_alias to SRCU updateMarcelo Tosatti2010-03-011-2/+2
| | | | | | Using a similar two-step procedure as for memslots. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: introduce kvm->srcu and convert kvm_set_memory_region to SRCU updateMarcelo Tosatti2010-03-013-42/+111
| | | | | | | | | | Use two steps for memslot deletion: mark the slot invalid (which stops instantiation of new shadow pages for that slot, but allows destruction), then instantiate the new empty slot. Also simplifies kvm_handle_hva locking. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: use gfn_to_pfn_memslot in kvm_iommu_map_pagesMarcelo Tosatti2010-03-012-8/+7
| | | | | | | So its possible to iommu map a memslot before making it visible to kvm. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: introduce gfn_to_pfn_memslotMarcelo Tosatti2010-03-011-8/+25
| | | | | | | | Which takes a memslot pointer instead of using kvm->memslots. To be used by SRCU convertion later. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: split kvm_arch_set_memory_region into prepare and commitMarcelo Tosatti2010-03-011-7/+5
| | | | | | Required for SRCU convertion later. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: modify memslots layout in struct kvmMarcelo Tosatti2010-03-012-19/+35
| | | | | | | | | Have a pointer to an allocated region inside struct kvm. [alex: fix ppc book 3s] Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: Simplify coalesced mmio initializationAvi Kivity2010-03-013-8/+34
| | | | | | | | - add destructor function - move related allocation into constructor - add stubs for !CONFIG_KVM_MMIO Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Add KVM_MMIO kconfig itemAvi Kivity2010-03-011-0/+3
| | | | | | s390 doesn't have mmio, this will simplify ifdefing it out. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Remove ifdefs from mmu notifier initializationAvi Kivity2010-03-011-5/+15
| | | | Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Add include guards for coalesced_mmio.hAvi Kivity2010-03-011-0/+5
| | | | Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Disentangle mmu notifiers and coalesced_mmio registrationAvi Kivity2010-03-011-11/+7
| | | | | | They aren't related. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: fix spurious interrupt with irqfdMichael S. Tsirkin2010-01-251-1/+2
| | | | | | | | | kvm didn't clear irqfd counter on deassign, as a result we could get a spurious interrupt when irqfd is assigned back. this leads to poor performance and, in theory, guest crash. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: properly check max PIC pin in irq route setupMarcelo Tosatti2010-01-251-1/+5
| | | | | | | | | | | Otherwise memory beyond irq_states[16] might be accessed. Noticed by Juan Quintela. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: only allow one gsi per fdMichael S. Tsirkin2010-01-251-2/+13
| | | | | | | | | | | | | | Looks like repeatedly binding same fd to multiple gsi's with irqfd can use up a ton of kernel memory for irqfd structures. A simple fix is to allow each fd to only trigger one gsi: triggering a storm of interrupts in guest is likely useless anyway, and we can do it by binding a single gsi to many interrupts if we really want to. Cc: stable@kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Acked-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Avi Kivity <avi@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 19:20:23 +0100